92503005962 REVB
JHF1 JIMI HENDRIX
™
FUZZ FACE
®
DISTORTION
DESCRIPTION
• Meticulously faithful reproduction of Jimi’s 1969-70 Dallas-Arbiter
Fuzz Face
• Built around the toneful BC108 silicon transistor
• True Bypass
DIRECTIONS
• Run a cable from your guitar to the Fuzz Face’s Input jack and another cable from the Fuzz Face’s Output jack to your amplifier.
• Start with both controls at 12 o’clock.
• Turn the effect on by depressing the footswitch.
• Rotate the VOLUME knob clockwise to increase overall effect volume or counterclockwise to decrease it.
• Rotate the FUZZ knob clockwise to increase amount of fuzz or counterclockwise to decrease it.
CONTROLS
VOLUME knob controls overall effect volume
FUZZ knob controls amount of fuzz
FOOTSWITCH toggles on/bypass
SPECIFICATIONS
Input Impedance
Output Impedance
Max Volume
Mid Volume
Max Gain
Bypass
Current Draw
Power Supply
10 kΩ
2 kΩ
115 kΩ
55 dB
True Hardwire
500 µA
9 volts DC
POWER
The JHF1 Fuzz Face is powered by one 9 volt battery (remove bottom plate to install).
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658