RFP 013-1617 Safety and Security Equipment Upgrade Addendum 5

RFP 013-1617 Safety and Security Equipment Upgrade Addendum 5
RFP TITLE: Safety and Security Equipment Upgrade
Extended Bid Due Date: September 23rd, 2016 at 10 AM
RFP # 013-1617
Addendum #5:
This addendum is to advise all bidders that the below changes were made to the scope of work.
Extend Bid Due Date to Sept 23rd, 2016 at 10am
Revised scope of work and disregard previous scope of work
Provide hourly/afterhours/weekend rate for installation
The vendor shall provide costs for Network Disk Recorder, camera type 1, camera type 2, handheld and walk-through metal detectors, Videofied Video Security System, and the Raptor Visitor
Management Software system. Vendor must provide hourly/afterhours/weekend rate for
installation onsite training for district employees. The security equipment must include the
minimum requirements listed below or equal.
1. Network Disk Recorder
Provide manufacturer's standard warranty.
Provide High Performance Network Disk Recorder for Network Cameras
High Performance Network Disk Recorder for Network Cameras
The recorder shall be capable of connecting to up to 64 network cameras without
extra license fees and their images can be recorded simultaneously.
The recorder shall be equipped with 9 hot plug HDD slots.
It shall allow up to 9TB HDD storage to be installed in the main unit.
The recorder shall have the capability of expansion up to 54 TB with five optional
Hard Disk Extension Units, each with 9 HDD slots.
The recorder shall have Intelligent VMD search function that allow motions in a
specified area in the recorded images of the compatible i-Pro cameras* to be
quickly searched.
The recorder shall be the equipment with an embedded real-time operating system
and shall not be based on a Microsoft Windows OS. The OS must reside completely
in the hardware and not be installed on the hard disk drives. Installed disk drives
must be dedicated to recording videos.
The recorder shall support MPEG-4 and JPEG multi format.
The recorder shall provide Various Recording Mode: Manual, Schedule, Event
(Pre/Post), Emergency, and External Timer. It shall have the capabilities to control:
Pan/Tilt, Zoom, Focus, Brightness and Preset Positions. It shall be able to search
using: Time & Date, Event Type and Camera number.
The recorder shall have up to 8 recording programs including individual recording
mode for each camera, and 6 time schedules per day.
The recorder shall have up to 64 audio capabilities and can be recorded and played
back at G.726 (ADPCM) 32 kbps.
The recorder shall have various alarm sources such as 32x Terminal inputs, 64x
Camera alarm, Alarm Protocol. The alarm actions shall include Alarm recording, Email notification, Alarm message, Camera positioning, FTP image transfer, Terminal
output, alarm protocol output, Buzzer and LED.
The recorder shall have 2x built-in Gigabit network interfaces (10Base-T / 100BaseTX / 1000Base-T) for camera recording and client access.
The recorder shall have the quick discovery and IP setup function for network
The recorder shall have the capabilities to transfer recorded images to FTP server
upon alarm and/or live image periodically. Images recorded in the SD memory card
in the cameras can be transferred to the recorder automatically even when the
recorder is in recording status.
The recorder shall have User/Host authentication, 4 programmable user levels, 16
user priorities and User-Camera View/Control partitioning setup for sophisticated
user management. It shall be capable of up to 32 user registrations.
The recorder shall have Alteration detection and recorded data encryption for data
Multi recorder, Multi site systems shall be connected with the optional
Management Software.
The recorder shall have RAID5/6 redundant recording for data security. The RAID6
feature allows the recorder to recover from a two-disk failure without any loss of
data (minimum four HDDs are required). With hot plug support, drives can be
replaced without any downtime, allowing 24/7 operations. It shall have Disk
partitioning to include Normal, Event, Pre-Event and Copy for flexible record
The recorder shall be viewable from any properly connected PC using Microsoft
Internet Explorer version 6.0 or later
The recorder shall provide user authentication and support different user privileges
based on logon ID. From the client the user should (with proper authentication) be
able to do the following:
Setup cameras
Define live viewing, recording rates and quality settings
Define recording programs and schedules
View live video in either single or quad views
Search and playback recorded video
Download selected recorded video
Control connected cameras
The recorder shall work with the optional viewer software which is capable of
viewing multiple cameras from multiple recorders on a single screen and provide
the following features:
Software shall be able to manage up to 100 networks connected recorders.
Software shall be able to display live video from any camera on any
connected recorder.
Software shall be able to display 1, 2x2, 3x3 or 4x4 multiplexed video.
Software shall show registered recorders as icons in a drop down menu.
Cameras will be shown as icons on the same menu, indented under the
attached recorder.
Software shall enable user to assign any video from any recorder into any
window on the multiplexed display
Software shall permit to register up to 32 users and each password and
provide up to 5 different levels of user privileges.
Software shall permit the remote operation of properly configured cameras
according to the user privilege level.
Software shall provide search functions for registered recorders and allow
search by Event, Mark or Motion. It must apply these search criteria across
multiple recorders.
Software shall permit the simultaneous playback of up to 16 videos.
Software must run on an IBM-PC/AT compatible computer with the following
minimum specifications:
OS: Microsoft Windows XP Home SP2/ XP Professional SP2/ 32bit
Vista Ultimate
CPU: Intel Core 2 Duo 2.66 GHz or faster
RAM: 1 GB or more
VRAM: 64 MB or more
Microsoft DirectX 9.0c or later
Graphics Card supporting more than 1024 x 768 resolution
100/1000 Ethernet Network Card
Internet Explorer 6.0 SP2 or later
Mouse, Keyboard, 1x USB port
Supported protocols: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP,
U. The power source shall be 120VAC, 60Hz at approx. 170W
2. Camera Type 1 - Fixed Dome Network Camera
Provide manufacturer's standard warranty.
Provide Video Surveillance Camera from single source manufacturer.
Model Requirements
The camera shall incorporate a 1/3" progressive MOS sensor, 2048(H) x 1536(V)
pixels effective (with a micro lens on each pixel for superior picture detail and
The camera's MOS sensor shall be charged with long and short charges, creating
both standard shutter speeds and fast shutter speeds simultaneously, on a single
image field. The MOS sensor shall automatically apply each exposure pattern to
bright and dark areas. The MOS sensor shall feature images with a dynamic range of
up to128 times.
The camera shall compliant to IEC impact test standard (IEC 60068-2-75 test Eh)
The camera shall compliant to IP66 Weather and Dust resistance with IEC60529
measurement standard.
The camera shall have a minimum illumination of WV-SW158 1.2 lx color .
The camera shall feature Full HD pixel (1920x1080) image transmitting.
The camera shall be capable of generating and transmitting images to meet the
following specifications.
3 Megapixel Mode [4:3 Format]
JPEG: 2,048 x 1,536 , up to 15 fps
H.264: 1,280 x 960 , up to 15 fps
2 Megapixel Mode [16:9 Format]
JPEG (MJPEG): 1920 x 1080 / 640 x 360 / 320 x 180, up to 30 fps
H.264: 1920 x 1080 / 640 x 360 / 320 x 180, up to 30 fps
1.3 Megapixel Mode [16:9 Format]
JPEG (MJPEG): 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps
H.264: 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps
1.3 Megapixel Mode [4:3 Format]
JPEG: 1,280 x 960 / VGA (640 x 480) / QVGA (320 x 240), up to 30 fps
H.264: 1,280 x 960 / VGA (640 x 480) / QVGA (320 x 240) , up to 30 fps
Simultaneous JPEG and two independent H.264 streams which are different
resolutions and bits. .
The camera shall feature 1.95 mm built in lens. The lens shall be suitable for use in
areas where there is a varying light source. The lens shall have a maximum aperture
ratio of 1:2.2 (wide). The unit shall have an angular field-of-view of 100 degrees
wide (horizontal), and 81.0 degrees wide (vertical).
The camera's built-in shutter shall feature 14 settings of off, 1/30, 3/100, 3/120,
2/100, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000 and 1/10000 sec. A
special menu shall allow fine adjustment of chrominance, pedestal and aperture
The power source for the camera shall be PoE IEEE 802.3af ( compliant power
device. All units shall be UL listed.)
Picture quality mode is dynamically changed by camera itself upon picture
characteristic to feed 30 fps at H.264 mode.
The camera shall be able to support uni-cast and multi-cast transmissions.
The camera shall have a built-in web server so that access to the IP video stream
can be obtained using Internet Explorer Version 7.0 or better. The web browser
shall permit the user to make adjustments and settings to the camera.
The Bandwidth Limit shall be adjustable to
64/128/256/512/768/1024/2048/3072/4096/8192kbps or unlimited.
The camera shall be capable of being configured to automatically transmit alarm
images transfer via FTP file transfer and/or e-mail. In addition the camera shall
support the scheduled transfer of image data via FTP to an FTP server.
The camera shall have one-way audio feature and be capable of transmitting the
audio stream through the same Ethernet connection as the video. The audio shall
be encoded using the G.726 or equivalent ADPCM standard.
The camera shall provide an SD Card (SDXC/SDHC/SD) slot which can support a
maximum of a 64Gbytes SDXC card that can cache images in the event of a network
failure. The camera shall also support manual recording to the optional SD Memory
MM. Supported protocols:
and SNMP.
The camera shall support IPV4 and IPV6 network addressing.
With uploading extension software and optional Registration Key, the camera shall
support optionally Face detection function.
The camera shall have Fog Compensation.
The camera shall have Advanced VBR in transmission priority.
The camera shall have SD memory card life notification function.
The camera shall be compliant with ONVIF Profile G.
The camera shall be capable of operating at an Ambient Temperature of -22
degrees F ~ +122 degrees F (-30 degrees C ~ +50 degrees C)
All units shall be UL listed.
The camera should also contain a connector for Ethernet.
Provide manufacturer's standard warranty.
Provide Video Surveillance Camera from single source manufacturer
1. The Camera shall produce a resolution of 1,280 x 720 pixels (HD 720p) at up to 60
fps with a 16:9 aspect ratio.
2. The Fixed Dome Camera shall produce a resolution of 1,920 x 1,080 pixels at 30fps
with a 16:9 aspect ratio.
3. The Fixed Dome Camera shall utilize an approximate 1/3 type high sensitivity MOS
image sensor.
4. The Fixed Dome Camera shall feature a 133dB wide dynamic range based on
Enhanced Super Dynamic and Adaptive Black Stretch technology (ABS).
5. The Dynamc Fixed Dome Camera shall generate multiple simultaneous video
streams of JPEG streams and up to four (4) high profile H.264 streams.
6. The Fixed Dome Camera shall be equipped with GOP control and Auto-VIQS as
bitrate reducing technology.
7. The Fixed Dome Camera shall utilize 3D-Multi process Noise Reduction (3D-MNR)
and Frequency Divided Filter (FDF) to remove visual noises in low light conditions.
8. The Fixed Dome Camera shall be rated to IP66 and NEMA 4X standard against
water and dust ingress.
9. The Fixed Dome Camera shall be rated to IK10 vandal resistance and IEC 60068-275 test Eh, 50J.
10. A user shall be able to view video on a PC using a browser.
11. A user shall be able to view video on a smartphone and tablet using viewer
software for iPhone and Android.
12. The Fixed Dome Camera shall offer Video Motion Detection (VMD) with four (4)
programmable detection areas, 15 steps sensitivity level and 10 steps detection
13. The Fixed Dome Camera shall offer an optional intelligent VMD (i-VMD) which
provides intruder detection, loitering detection, direction detection, scene change
detection, object detection and cross line detection.
14. The Fixed Dome Camera shall offer an optional face detection function.
15. The Fixed Dome Camera shall have 2x and 4x digital zoom function.
16. The Fixed Dome Camera shall provide Variable Image Quality on Specified Area
(VIQS) which sets different image qualities to up to eight (8) areas in the full view
to reduce bandwidth and storage capacity requirements.
17. The Fixed Dome Camera shall provide Cropping function which sends out the full
view and up to four (4) areas cropped from the full view simultaneously so it
enables to view the full view and details at the same time.
18. The Fixed Dome Camera shall have which ensures clear face image.
19. The Fixed Dome Camera shall have Fog compensation function.
20. The Fixed Dome Camera shall have High light compensation (HLC) function.
21. The Fixed Dome Camera shall have Super Chroma Compensation (SCC) which
realizes a better color reproducibility in the low illumination.
22. The Fixed Dome Camera shall have Lens Distortion Compensation to compensate
the barrel distortion.
23. The Fixed Dome Camera shall provide up to eight (8) areas of electronic privacy
24. The Fixed Dome Camera shall offer the prioritized stream control which transmits
a video stream to the specified client PC or recorder preferentially.
25. The Fixed Dome Camera shall have a SD memory card slot that supports SD, SDHC
and SDXC memory card for local storage.
26. The Fixed Dome Camera shall offer full-duplex bi-directional audio communication
between the camera and monitoring site.
27. The Fixed Dome Camera shall have a dehumidification unit to keep the camera dry
28. The Fixed Dome Camera shall conform to the ONVIF standard.
1. Image Sensor
2. Scanning Mode
3. Scanning Area
4. Minimum Illumination
a. WV-SFV311A
b. WV-SFV310A
5. Day & Night
a. WV-SFV311A
b. WV-SFV310A
6. Dynamic Range
1. Vari-Focal Length
2. Max. Aperture Ratio
3. Angular Field of View
a. 16:9 aspect ratio
b. 4:3 aspect ratio
4. Focus adjustment
a. WV-SFV311A
b. WV-SFV310A
1/3 type MOS image sensor
4.86 mm (H) x 3.89 mm (V) {3/16 inches(H) x 5/32
0.01 lux (F1.6, Maximum shutter: Max. 1/30s, Gain:
0.003 lux (F1.6, Maximum shutter : Max. 1/30s, Gain :
0.01 lux (F1.6, Maximum shutter: Max. 1/30s, Gain:
0.008 lux (F1.6, Maximum shutter : Max. 1/30s, Gain :
IR Cut filter Removal
133 dB typ. (Super Dynamic : ON, Light Control Mode :
2.8 ~ 10mm (1/8 ~ 25/64 inches)
1 : 1.6 (WIDE) ~ 1 : 3.4 (TELE)
H: 28° (TELE) - 99° (WIDE)
V: 16° (TELE) - 54° (WIDE)
H: 28° (TELE) - 99° (WIDE)
V: 21° (TELE) - 72° (WIDE)
Auto Back Focus (ABF) / Manual
Focus Assist
1. Horizontal
2. Vertical
3. Image tilt adjustment
1. Compression Format H.264, JPEG
2. Image Resolution
a. 16:9 aspect ratio (2 mega pixel mode)
1,920 x 1,080 / 640 x 360 / 320 x 180 / 160 x 90 (30fps)
b. 16:9 aspect ratio (1.3 mega pixel mode)
1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90 (30/60fps)
c. 4:3 aspect ratio (1.3 mega pixel mode)
1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240
160x120 (30fps)
3. H.264
a. Transmission Mode
Constant bitrate, VBR, Frame rate priority, Best
Advanced VBR
b. Frame Rate
1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps
c. Bit Rate/Client
64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 /
3,072 /
4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 /
20,480 / 24,576 / 30,720 / 40.960kbps
d. Image Quality
Low / Normal / Fine
e. Transmission type Unicast, Multicast
a. Image quality
10 steps
b. Transmission type Pull, Push
a. Audio Compression G.726 (ADPCM) 32kbps / 16kbps, G.711 64kbps, AAC-LC
b. Audio Mode
WV-SFV311A OFF / Microphone (Line) input / Audio output / Interactive
duplex) / Interactive (Full duplex)
1. Super Dynamic
On(High) / On(Normal) / Off
Super Dynamic is automatically set Off on 60fps mode.
2. Face Super Dynamic
ON / OFF (Only at Super Dynamic : ON)
3. Adaptive Black Stretch ON / OFF (Only when Super Dynamic is OFF )
4. Fog compensation
ON / OFF (Only when Super Dynamic/ Adaptive black
stretch Off)
5. AGC
6. Electronic Sensitivity Up
Max. 1/1000 s, max. 1/500 s, max. 1/250 s, max.
1/100 s,
max. 2/120 s, max. 2/100 s, max. 1/30 s, max. 2/30 s,
max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s
7. Day & Night
a. WV-SFV311A
Off/ On/ Auto1 (Normal) / Auto2 (IR light) / Auto3 (SCC)
b. WV-SFV310A
Off / Auto
8. Digital Noise Reduction High / Low
9. Video Motion Detection
4 areas, Sensitivity:15 steps, Detection size:10
10. Privacy Zone
Up to 8 zones
11. VIQS
Up to 8 zones
12. Camera Title (OSD)
Up to 20 characters
13. Digital Zoom
1x, 2x, 4x
14. Lens Distortion Compensation 256 steps
1. Network Interface
2. IP
3. Supported Protocols
a. IPv6
b. IPv4
10Base-T / 100Base-TX, RJ-45 connector
IPv6, IPv4
Up to 14 users
4. Max. User access
5. Web Viewer
a. Supported OS
Microsoft Windows 8.1 / 8 / 7 / Vista
b. Supported Browser Microsoft Internet Explorer 11 / 10 / 9 / 8 / 7
Safari, Google Chrome, Mozilla Firefox
c. GUI Language
English, Italian, French, German, Spanish, Portuguese,
Chinese, Japanese
1. Monitor Output
VBS : 1.0 V [p-p] / 75 ohm, NTSC / PAL composite,
ø3.5mm mini jack, for adjustment
2. Microphone/Line input
a. WV-SFV311A
ø3.5 mm monaural mini jack
b. WV-SFV310A
3. Audio Output
a. WV-SFV311A
ø3.5 mm stereo mini jack (monaural output)
b. WV-SFV310A
4. External I/O Terminals
a. WV-SFV311A
b. WV-SFV310A
5. SD memory card slot 1 slot, SD/SDHC/SDXC
1. Power Source
2. Power Consumption
1. Safety
2. EMC
1. Dimensions (D x H)
2. Weight
3. Construction material
a. Main body
b. Dome section
4. Finish
a. Main body
b. Dome section
DC 12V/710mA, PoE (Class 0)
Approx. 8.5W (DC 12V), Approx. 9.6W (PoE)
UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1),
CE, IEC60950-1
FCC (Part15 Class A), ICES003 Class A, EN55022 Class B,
ø164 mm x 139 mm (ø6-15/32 x 5-15/32 inches)
(Including the base bracket)
Approx. 1.6 kg (3.53 lbs.)
Aluminum die cast
Polycarbonate resin
Light gray
1. Vandal Resistance
2. Ingress Resistance
IEC 60068-2-75 test Eh, 50J / IEC 62262 IK10
IP66, IEC60529 measuring standard compatible,
Type 4X (UL50), NEMA 4X compliant
3. Operating Temperature -40 °C ~ +50 °C (-40 °F ~ 122 °F)
4. Operating Humidity
10 % ~ 90 % (without condensation)
1. Extension Software for Face Detection function
2. Extension Software for intelligent Video Motion Detection
1. Ceiling Mount Bracket
2. Wall Mount Bracket
3. Smoke Dome Cover
4. Sun Shade
4. Handheld Metal Detector
PD240 Handheld Metal Detector Specifications
The PD240 is a Handheld Metal Detector that combines high reliability and ergonomics with
advanced detection and operator signaling features. Effective sensitivity to all metals, full
compliance with the latest Security Standards and high immunity to external metal masses are
among the main peculiarities of this new device. The PD240 incorporates innovative technical
solutions which make it possible to operate much closer to floors with steel reinforcement bars
than was previously possible with conventional Handheld and Walk-Through Metal Detectors.
All this without any reduction in sensitivity.
Elegant, Robust and Ergonomic
The PD240 features a special ergonomic design consisting of an offset hand grip which ensures
that the operator’s hand does not interfere with the sensitive detection area. On the new
model the sensitive area is 70% wider than before.
This means fewer scans per person and therefore shorter inspection times per person. Special
care has gone into the mechanical design of the detector. Absence of sharp edges or corners
allows the detector to be passed smoothly over the inspected area without getting caught in
buttons, buckles, folds or other parts of clothing.
NIJ Standard 0602.02 Compliant
The technical features of the detector comply with the NIJ standard 0602.02 and the new NIJ
draft standard 0602.03. The PD240 has uniform sensitivity to magnetic and non-magnetic
targets including those made of stainless steel. At the same time the detector offers excellent
body-effect compensation and has high immunity to external disturbance from electromagnetic
and mechanical sources.
Full Digital Design
The PD240 is fully digital. Electronic functions include a inspection field transmitter-receiver
based on Digital Signal Processing (DSP) technology, a digital operator interface and external
communications over the incorporated USB port. This design combined with a special printed
antenna ensures top reliability and very high repeatability.
Advanced Control Panel
The control panel with switches and warning lights is made from high-thickness silicon
guaranteeing high degree of protection to make the PD240 suitable for indoor and outdoor use.
Advanced Alarm Indication
The alarm signaling modes include: optical alarm which is fixed or is proportional to the
intensity of the detection signal; acoustic alarm with a constant tone or a tone which is
proportional to the size of the object detected; vibration alarm signal.
It is also possible for the safety manager or the checkpoint supervisor to lock one or more
operator commands.
Extended Continuous Operation Time
The PD240 metal detector is powered by two AA-size NiMH batteries with a battery life of over
100 hours. A Low Power Mode is automatically activated during pauses, extending the battery
life up to 200 hours. An internal circuit optimizes battery recharging which takes less than five
Latest Plastic Materials Technology
The metal detector casing is made from next-generation technical polymers. These plastics
offer high chemical resistance and mechanical strength ensuring a long detector life even in
heavy duty conditions.
Sophisticated Communication Capabilities
The digital design of the new metal detector also enables the maximum flexibility in selecting
how detection alarms are signaled. Users can keep the factory settings or connect the detector
over its USB to a PC and then personalize the settings with a dedicated graphic interface.
Power Supply
2x AA size NiMH, rechargeable batteries
Fully customizable control panel
Optical, acoustic and vibratory alarm modes
3-level sensitivity selection buttons
Detection and operational functions
Customizable via HHMD Configuration tool
Battery life: 100 + hours (AA NiMH batteries 2500 mAh); up to 200 hours with automatic
sleep mode
Low battery indicator
Built-in fast battery charger in combination with the HHDS Docking station
Operating temperature
-40°C to 70°C
Storage temperature
-40°C to 80°C
Relative humidity
0 to 98% (without condensation)
430 mm x 80 mm x 40 mm
HHDS Docking station: 175 mm x 115 mm x 85 mm
Carry Bag: 430 mm x 340 mm x 105 mm
With battery: 470 g
HHDS Docking station (with power adapter): 755 g
Carry Bag: 1,3 kg
Light grey RAL 7040
Carry Bag: Green RAL 7013
In grey shock-resistant technical polymers
Conforms to the NIJ 0602.02 and the new NIJ 0602.03 Standards for metal detection
Conforms to the international standards currently applicable for safety, EMC and to the
applicable CE regulations
NATO stock number
5. Walk-Through Metal Detector
Hi-PE Plus Walk-Through Metal Detector Specifications
The installing technician must have an engineering key to complete installation.
A Multi-zone Walk-Through Metal Detector for “Building Security”
Detection Capability
The Multi Zone Metal Detector should detect metal weapons and/or metal contraband items
carried on a person, regardless of the orientation or the manner in which they are worn
through the archway, independently from their orientation, trajectory and transit speed (range:
0.5…1.3m/s). The detection capability of the Multi Zone Metal Detector shall be stable without
variation. The Multi Zone Metal Detector should require periodic recalibration. Calibration
samples should be available at the competent Authority’s Premises for the setting of the
Working Parameters during the tests.
The Metal Detector should detect the samples required by the following Security Level:
Minimum signal magnetic Disassembled Gun
Minimum signal non-magnetic Disassembled Gun
The Metal Detector programming access should be protected by a mechanical lock and
by a password made up of 6 alphanumeric characters.
The Metal Detector should have two independent levels of programming (user and
administrator), each one protected by a password.
The Metal Detector should have two programming methods: Local using keypad on the
control unit Remote through a RS232 port and a laptop
Optical/Acoustical Indications
The Metal Detector should be equipped with two full-height luminous bars, so one can
be placed at the entrance and one at the exit side of the archway. The bars shall indicate the
position of the metal objects causing the alarm with a minimum resolution of 35 cm.
The Metal Detector control unit should be equipped with an optical display alarm and
messages notifications, clearly visible and readable at a minimum distance of 5 m. The optical
alarm display should have a bar graph indication proportional to the metal mass in transit. The
signals below the alarm threshold should be displayed in green, whilst those above the
threshold should be displayed in red.
The Metal Detector should be equipped with an audible alarm signal adjustable in
duration, tone and volume.
The minimum volume available at operator level should be determined by an
appropriate programming parameter at administrator level.
The Metal Detector should display the current Security Level at start-up.
The Metal Detector should provide the operator with appropriate acoustic and optical
signals during the start-up and normal operation.
Other Technical Specifications
The Metal Detector should have an anti-tamper On/Off switch.
Regular operation of the Metal Detector is required even when two Metal Detectors are
installed at a reciprocal gate distance of 5 cm, without the use of synchronization cable(s).
The Metal Detector should be equipped with a self diagnosis system which ensures the
immediate signaling of faults or performance changes both at start-up and during operation.
The construction of the Metal Detector should be completely modular in order to make
any maintenance operation on electronic and mechanical parts easy.
Mechanical Specifications
Minimum height of the Transit Area: 80 inch (2030mm)
Minimum width of the Transit Area: 28 inch (710mm)
The Metal Detector should be a standalone unit, provided with smooth, robust and
washable surfaces.
The Metal Detector archway should be equipped with four anchoring points to the floor
and once installed; it should be capable to withstand a force of 80 kg at 2 m from the ground
without falling down.
The Metal Detector archway should be equipped with lower side protections against
damages due to bumps of floor cleaning machineries and sprinkling of water or other
The display and the keypad on the Metal Detector should be protected by a plastic
transparent cover lockable by key.
Environmental Characteristics
Storage temperature: from -31ºF (-35ºC) to 158ºF (70ºC).
Working temperature: from -4ºF (-20ºC) to 158ºF (+70ºC).
Relative storage humidity: from 0 to 95% without condensation
Relative working humidity: from 0 to 95% without condensation
Electrical Safety, harmlessness and certifications
The Metal Detector should be certified by a third party accredited Laboratory as
conforming to International Standards on the Human Exposure to Electromagnetic Fields.
Electrical Safety: For safety reason, in order to prevent any probability of electrical
hazard, the Metal Detector should be powered by a nominal voltage to ground not exceeding
50V alternating current to prevent the risk of people in transit coming into accidental contact
with parts of the gate powered at mains voltage.
The Metal Detector should use CW (continuous wave) magnetic fields for best pacemaker and vital supports harmlessness technology.
The Metal Detector should not interfere with medical devices such as hearing aids,
cardiac stimulators, defibrillators, neurological stimulators
6. Videofied Wireless Video Alarm Security
Videofied Wireless Video Alarm Security Specifications
Videofied is not a CCTV surveillance system that simply records videos that are accessed by the
owner. Rather, Videofied is a complete video alarm system that sends a short video clip with
the alarm notification to the central station for immediate review. Videofied links the video
with the central station – self-surveillance does not. A monitored video alarm delivers quicker
police dispatch.
Detection Capability
Videofied is an intrusion detection system that is professionaly monitored for immediate video
verification of the alarm and priority police response to the intrusion. With our control panels
and full range of wireless devices, Videofied is versatile enough to provide verified security for
any application: indoors or outdoors in any weather, local or remote, for large and small
properties, as a standalone system or as a video verification upgrade to existing burglar alarms.
Videofied delivers faster police response to an actual crime because the human operators filter
out false alarms. Videofied systems provide responsive security to a large variety of
commercial, industrial and residential sites and applications from large homes and small offices
to remote mining plants and urban substations.
A video-verified alarm can make all the difference for all parties involved:
Police: verified response, more arrests, reduced crime
Property owners: reduced losses, enhanced peace of mind
Dealers: better value proposition, more results, happier customers
Outdoor Panel
Part #: XTO-IP630
The Outdoor XT Control Panel is designed for securing outdoor and large commercial
applications that have adequate cellular reception or an Ethernet/IP connection available. With
integrated high-gain RF and cellular antennas, this panel is perfect for protecting outdoor
storage lots, critical infrastructure, remote sites and large warehouses. When battery-powered
and communicating over cell, the Videofied system is completely portable and can be moved to
new locations (construction sites, vacant homes, storage lots) as the security needs change.
This panel is rated for extreme temperatures and comes in an IP65 waterproof NEMA case with
a simple mounting bracket for pole, corner and flat wall mounting.
Programming An alphanumeric keypad (XMA621 or WMB621) or the Frontel Installer Software
(with the TMT USB Programming Kit) is required for programming and maintenance
Communication to devices 915 MHz RF (military grade) RF range 500-1500 ft (varies by
environment, amount of obstructions like metal, earth and concrete) Communication to central
station Cellular or Ethernet (Dynamic or Static) with cellular backup Power options PP1 (4 D-Cell
Lithium batteries) or PP4 (12V DC power supply with backup Alkaline batteries; required if using
Ethernet connection or using programmable inputs and/or outputs) Operating temperature
range -20/+140°F (-30/+60°C) Wireless zones 24 Wired inputs 3 programmable (i.e. hardwired
zones), 2 arming Arming modes 3 (stay, away, perimeter) Partitions 2 Arming options Alpha
keypad (XMA621, WMB621), Prox Tag Arming Station (BR651), Remote (RC601), schedule,
VideoApp4All or other smartphone app (conditional, see Notes), existing burglar alarm panel
relay trigger to Videofied arming inputs (when panel is in Xtender mode) User/access codes 20
(19 users, 1 installer)
Vertical Alpha Keypad
Part #: XMA621
The Vertical Alpha Keypad is a battery-operated, wireless, alphanumeric keypad designed for
the configuring/programming, maintenance and arming/disarming of indoor Videofied systems.
Temperature range: +14/+104°F (-10/+40°C)
Up to 3 alpha keypads can be added to each control panel
Built-in sounder provides entry/exit delay beeps and alarm sounds
Dual tamper provides detection for both wall and cover
Up to 4 years battery life for low alarm activity
The XMA621 keypad is a mobile programmer that can be used anywhere on the
installation site during system programming
Typically installed near entry/exit doors to allow system users enough time to arm and
exit the premises, and to enter and disarm the system before time delay expires
Indoor MotionViewer
Part #: IMV601
The Indoor MotionViewer® is a battery-powered device that includes an integrated PIR motion
sensor, digital video camera and infrared illuminators. It is designed to detect an intruder,
instantaneously record a short video clip and send it over military-grade RF to the control panel
which then transmits the alarm signal + video clip to a monitoring station via cell or Ethernet.
After receiving and reviewing the video clip, monitoring operators will verify the intrusion event
and dispatch to law enforcement for priority response to a crime-in-progress.
Infrared illumination up to 23 feet from device for night vision
Military grade RF to and from control panel
Temperature range: +14/+122°F (-10/+50°C)
Up to 4 years battery life for low alarm activity
Video: color/day, monochrome/night
Full VGA color for remote Look-in via smartphone app
Programmable PIR sensitivity
Programmable video resolution
Outdoor MotionViewer
Part #: OMV601MB
The Outdoor MotionViewer® is a battery-powered PIR motion sensor with an integrated video
camera and infrared illuminators. It is designed to detect an intruder, instantaneously record a
short video clip and transmit the video to the control panel. The panel then transmits the video
alarm signal to the central station for immediate review and dispatch to law enforcement for
priority response to a crime-in-progress
Product Details
New and Improved Features
Infrared illumination up to 30 feet from device.
IP 65 Weatherproof rated.
Temperature rated to -20° to +140°F (-30° to +60°C)
Operates for years on one set of AA batteries
RF range between panel and device: 500ft; up to 1000ft for line-of-sight contexts (zero
1/4 inch x 20 mounting thread
Multiple Fresnel lens options
Enhanced night vision
Accelerometer tamper
Input/output (3/1) terminals for integrating 3rd party devices
VGA day/night video camera
Doubled wireless transmission speed
Easy battery change
Wireless Indoor Siren
Part #: SE601
The Indoor siren enhances intruder deterrence and delivers a 110 db blast in the event of an
intrusion. Totally wireless, it can be mounted easily anywhere without the need to drill holes to
run signal or power. Multiple sirens can be placed on one system.
Annunciates the alarm sounds and entry/exit delay beeps of Videofied security systems
Compatible with all control panels
Produces an output level of 110 dB at 3 ft for 1.5-3 minutes during alarm
Typically installed in hallways, foyers, or other similar areas where sound can resonate
so occupants can hear alarms
Dual tamper function provides detection for both wall and cover tamper
Up to 4 year battery life on alkaline batteries
Temperature range: +14/+104°F (-10/+40°C)
7. The Raptor System
The Raptor System
Web-based. Feature-rich. Easy to use.
The Raptor System provides an effective and affordable way to help schools and community
facilities keep unwanted visitors out while tracking those they allow in. Simply scan a visitor’s
Driver's License or other state issued ID and the Raptor System instantly screens for registered
sex offenders in all 50 states and can also screen for individuals with restraining orders, custody
issues, suspended or expelled students, known gang members, or for any custom alert.
When a visitor is cleared, the Raptor System prints a badge featuring the visitor's name, photo,
date and time, and destination. If a potential threat is identified, the Raptor System sends
instant alerts to designated officials, including administrators and law enforcement, via email
and/or text messaging. Only the Raptor System has FP logic to help prevent repeat positive sex
offender matches.
The Raptor System can also be used to track and report faculty and volunteer hours as well as
student tardies and early sign-outs.
Raptor’s web-based platform is accessible from any workstation with a high speed Internet
connection, even off-site computers. This is especially important in emergency situations.
Easy to set up and install. All you need to run the Raptor System is a computer with an internet
connection, a Raptor Optical Scanner, and a Badge Printer. Software installation is quick and
Raptor can have a single school or an entire district protected within days.
No per seat/workstation license fee. Each facility/building can host an unlimited number of
Raptor workstations per site.
Live customer support. Raptor provides live customer support from 7 am to 5 pm CT Monday
through Friday. Raptor also provides on-demand online training as well Remote Assistance.
Easy reporting tools. The Raptor System offers a variety of reporting options including visitors
logged, "Who's in the building", volunteer hours worked, student tardies, sex offenders logged,
and activities by date range. Reports can be run from any computer with an internet
Alert monitoring. Raptor is the only visitor management provider that monitors your facility's
sex offender alerts in real-time.
Free automatic software upgrades. No need to pay for upgrades. Raptor is web-based, so
updates are installed automatically.
RAPTORTRACE - Criminal Background Checks for Volunteers
Millions of Records. Instant Results.
With RaptorTrace’s online criminal background screening service, schools and other
organizations can know that the people they bring into their organization are people they can
trust. RaptorTrace offers an affordable way to instantly pre-screen individuals such as
applicants, volunteers, faculty, and members, against more than 313,000,000 national records*
Arrest Records (ARST)
Administrative Office of the Courts
Department of Corrections
County Court
District Court
Superior Court
Municipal Court
District Clerk
Common Pleas
Clerk of Court
* Important note: Only electronically filed records can be accessed using RaptorTrace. Any
records that are not filed electronically are not searched by RaptorTrace.
Works with the Raptor System to pre-screen volunteers. The Raptor System works in
conjunction with RaptorTrace, providing schools with an easy solution to pre-screen
Volunteers. Simply set up an approval queue through the Raptor System and new volunteer
information is automatically entered into RaptorTrace.
Nation’s Leading K-12 Visitor Management Software
Raptor Technologies offers a full range of visitor management products that can improve safety
and protect any facility from registered sex offenders.
Raptor products include:
Raptor System - Raptor’s signature software for K-12 schools and facilities with children
RaptorTrace - Online, real-time criminal background screening service
Virtual Volunteer - School volunteer management tool
Batch Screening - Sex offender screening tool for membership lists
What Makes Raptor Different?
Raptor is the visitor management software of choice for over 15,000 K-12 schools and over 500
YMCAs and similar organizations around the country. There is a reason why Raptor serves more
K-12 schools and community facilities than any other visitor management provider. The reason
is that Raptor beats the competition on 5 key dimensions:
Feature Functionality – Raptor has a broad range of feature functionality that addresses
the full list of needs for visitor, student tardy, and volunteer management.
Comprehensive Database – Raptor has the most comprehensive database of registered
sex offenders of any provider because Raptor has been accumulating data on offenders for over
a decade and updates its database every week.
Offender Alert Monitoring – Raptor assists front desk personnel by monitoring every
potential offender match for visitors and volunteers, ensuring that our clients properly
differentiate between false positives and actual offenders.
Customer Service – Raptor provides phone and email technical support from 7 am to 5
pm CT to ensure that customer issues or requests are taken care of in a timely manner. Raptor's
customer support is unmatched in our industry.
New Products – Raptor continues to develop new cutting edge products from fully
customizable student tardy workflow to visitor management for use on mobile devices.
Data Security & Reliability
Data security is always a top priority for Raptor. Raptor's system uses only the minimum data
needed for an instant sex offender screening. Raptor also uses state of the art firewalls,
intrusion detection systems, host integrity monitoring, port filtering and other security
processes and procedures to protect all its systems.
Raptor Basic System
2 door signs, 1 installation and maintenance packet)
One system required for each building.
Package Contains Annual Access Fee (1 year)
Sex Offender Alert Monitoring--FREE!!
Raptor Duplex ID Scanner
Raptor Turbo 450 Badge Printer
Raptor Self-Expiring Badges (Adhesive)
Raptor has added an additional security measure by branding the Raptor logo on all adhesive
Quality guaranteed for one (1) year after purchase date. THERMAL!!!! Do not store in direct
sunlight or extreme environments. Climate controlled environment recommended. Rotate
current inventory to be used first.
All Raptor badges are now branded with the Raptor logo.
Cost Sheet
Please provide cost per unit below
1. Network Disk Recorder
___$____________________ Per Unit
2. Camera - Type 1
___$____________________ Per Unit
3. Camera - Type 2
___$____________________ Per Unit
4. Handheld Detector
___$____________________ Per Unit
5. Walk-Through Detector
___$____________________ Per Unit
6. Videofied Wireless System
___$____________________ Per Unit
7. Raptor System
___$____________________ Per Unit
Installation cost
Hourly rate:
End of Scope
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF