FH16 64 Tractor X-high Rear Air FH 64 T6CA

FH16 64 Tractor X-high Rear Air FH 64 T6CA
Volvo Trucks. Driving Progress
FH16 64 Tractor X-high Rear Air FH 64 T6CA
3608
,38
Cab 2495
Chassis Dimensions [mm]
WB Wheelbase
3000
3200
3400
3600
3900
A
D
Overall Chassis Length
Centre of rear axle to back of cab
6540
1990
6740
2190
6940
2390
7140
2590
7440
2890
T
Theoretical Wheelbase
3685
3885
4085
4285
4585
5090
2030
7120
5095
2030
7125
5585
3730
9315
5600
3735
9335
5625
3745
9370
Chassis Weights [kg]
Front Axle
Rear Bogie
Kerb Weight
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb
Turning Circle Diameter Wall to Wall
13300 13900 14500 15100 16100
14700 15300 15900 16500 17400
Plated Weights [kg]
Design
Gross Vehicle Weight
Gross Combination Weight
Front Axle
Rear Bogie
29000
44000
8000
21000
Important Notes
Chassis Dimensions
Cab Height: +305 mm for CAB-HSLP, -283 mm for CAB-LSLP, +450 mm for
CAB-XHSL.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 100 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres:
315/80R22.5
Drive Axle Tyres:
315/80R22.5
Chassis weight includes oil, water, AdBlue, 70 litres fuel and without
driver. Kerb weight can vary ± 3%.
Turning diameters are theoretically calculated.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights,
ask your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Instructions and chassis assembly drawing FH64T6CA.
1 (7)
Ref: FH 64 T6CA 01 KOR 2015-06-17 ENGVT
FH16 64 Tractor X-high Rear Air FH 64 T6CA
Transport operation
■ RC-ROUGH
Rough road conditions.
• Less than 95% of the driven distance on well maintained or
less maintained surfaced roads.
and / or
• In total not more than 5% of the driven distance on:
- Very badly maintained surfaced roads.
- Hard packed sand or gravel surface of very bad quality.
- Washboards.
- Soft unpaved surface.
- Off-road.
□ VISI15
□ VISI15+
Visibility package
Visibility plus package
□ ASAF15
□ ASAFEFH
Active safety package
Active safety package
□ OFFRFH
Construction package for FH
Chassis
■ FST-PAR3
3 leaf front parabolic suspension (stiffer than normal)
□ FAL10.0
■ FAL8.0
□ FAL9.0
Front axle load 10.0 tonnes
Front axle load 8.0 tonnes
Front axle load 9.0 tonnes
Chassis height extra high - approx. 1030 mm above ground
level
■ FALIM
Front axle load limiter
■ RADD-G2
Rear air suspension, 2 axles - 2 driven, high ground clearance
■ FSTAB3
Front stiff stabilizer
□ FH16HSLP
□ FH16LSLP
■ FH16SLP
FH16 Globetrotter sleeper cab
FH16 Low sleeper cab
FH16 Sleeper cab
■ RAL21
□ RAL23
□ RAL26
Rear axles load 21 tonnes
Rear axles load 23 tonnes
Rear axles load 26 tonnes
□ EU5EEV
Emission level Euro 5, Enhanced Environmental friendly
Vehicle (EEV)
Euro 5 emission level with Selective Catalytic Reduction (SCR)
■ RSTAB3
Rear stiff stabilizer
■
□
□
□
First rear drive axle load limiter, 10.5 tonnes (speed controlled)
First rear dive axle load limiter, 13 tonnes
First rear drive axle load limiter, 15 tonnes
First rear drive axle load limiter, 9.5 tonnes
Core components
■ CHH-XHIG
□ EU5SCR-M
□
□
□
□
□
□
□
□
■
D16C550
D16C610
D16E600
D16E700
D16G540
D16G600
D16G700
D16G750
D16K550
□ D16K650
□ D16K750
□ EBR-EPG
□ EBR-EPGC
□ EBR-VEB+
□ AT2812D
□ ATO3112D
■ VT2814B
□ VTO2814B
□ RTH2610B
□ RTH2610F
■ RTS2370A
Diesel engine, 16 litre Euro 3, 550 hp, 2500 Nm
Diesel engine, 16 litre Euro 3, 610 hp, 2800 Nm
Diesel engine, 16 litre Euro 4 SCR, 600 hp, 2800 Nm
Diesel engine, 16 litre Euro 4 SCR, 700 hp, 3150 Nm
Diesel engine, 16 litre Euro 5 SCR, 540 hp, 2650 Nm
Diesel engine, 16 litre Euro 5 SCR, 600 hp, 2800 Nm
Diesel engine, 16 litre Euro 5 SCR, 700 hp, 3150 Nm
Diesel engine, 16 litre Euro 5 SCR, 750 hp, 3550 Nm
Diesel engine, 16 litre Euro 6 SCR + EGR (Diesel particulate
filter), 550 hp, 2900 Nm (2800 Nm with manual gearboxes)
Diesel engine, 16 litre Euro 6 SCR + EGR (Diesel particulate
filter), 650 hp, 3150 Nm
Diesel engine, 16 litre Euro 6 SCR + EGR (Diesel particulate
filter), 750 hp, 3550 Nm
RALIM105
RALIM13
RALIM15
RALIM95
□ ASF-DL3
Air suspension with 3 driving levels
□ ACTST-TO
Volvo Dynamic Steering (VDS) with extra pump and torque
overlay
■ PSP-FIX
□ PSP-VAR
Power steering pump with fixed displacement
Power steering pump with variable displacement
■ EBS-MED
EBS (Electronic Brake System) medium package:
- ABS Lining Wear Sensing (20 % left)
- Lining Wear Control (incl. wear on the axle)
- Brake Blending
- Drag Torque Control
- Diff Lock Synchronization
- Diff lock Control
- Brake Temperature Warning
- External Brake Demand
- Diagnosis Via Truck Electronic System
- Traction Control System
- Emergency Brake Assistance
- Constant Wheel Brake Monitoring
- Coupling Force Control
- Automatic Parking Brake Activation
- Lining Wear Analyses (calc of remaining mileage)
- Hill Starting Assistance
- EBS status monitoring via Truck Electronic System
EBS (Electronic Brake System) standard package:
- ABS Lining Wear Sensing (20 % left)
- Lining Wear Control (incl. wear on the axle)
- Brake Blending
- Drag Torque Control
- Diff Lock Synchronization
- Diff lock Control
- Brake Temperature Warning
- External Brake Demand
- Diagnosis Via Truck Electronic System
- Traction Control System
- Emergency Brake Assistance
- Constant Wheel Brake Monitoring
- Coupling Force Control
- Automatic Parking Brake Activation
Engine brake with exhaust pressure governor, EPG
Volvo engine compression brake with exhaust pressure
governor, EPG (for I-shift)
Volvo Engine Brake, VEB+ (high efficiency compression brake
with exhaust pressure governor, EPG)
I-Shift automated mechanical 12-speed gearbox without clutch
pedal, max. engine torque 2800 Nm, max. permitted GCW
52000 kg
I-Shift automated mechanical 12-speed overdrive gearbox
without clutch pedal, max. engine torque 3150 Nm, max.
permitted GCW 60000 kg.
Suitable for hub reduction rear axles.
Manual range & splitter 14-speed gearbox, max. engine torque
2800 Nm, max. permitted GCW 100000 kg
Manual range & splitter 14-speed overdrive gearbox, max.
engine torque 2800 Nm, max. permitted GCV 100000 kg
□ EBS-STD
Rear hub reduction tandem axles - bogie load 26 tonnes, GCW
100 tonnes, 4 planet gears
Rear hub reduction tandem axlesbogie load 26 tonnes, GCW
100 tonnes
Rear single reduction tandem axles - bogie load 23 tonnes,
GCW 70 tonnes
Packages
■ AUDBAS
□ AUDHIG
□ AUDHIGP
Audio basic: RDS radio with CD player, FM/AM antenna and
speakers in dashboard&doors
High power audio system: RDS radio with CD player (also
playing MP3/WMA files from CD), FM/AM antenna, speakers in
dashboard&doors&sleeping compartment, integrated bluetooth
phone and USB/Line inputs.
High power audio system with amplifier: RDS radio with CD
player (also playing MP3/WMA files from CD), FM/AM
antenna, speakers in dashboard&doors&sleeping
compartment, integrated bluetooth phone, USB/Line inputs,
amplifier, subwoofer and tweeters.
■ Standard Equipment
□ AUXPARK
Two extra parking brake chambers
■ FRAME300
Frame rail section external height 300 mm
□ FST7070
■ FST8080
Frame section thickness - web 7.0 mm / flange 7.0 mm
Frame section thickness - web 8.0 mm / flange 8.0 mm
□ FIL-EEEB
■ FIL-TXEB
Frame inner liner from engine end to bogie end
Frame inner liner from transmission member to bogie end
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
2 (7)
Ref: FH 64 T6CA 01 KOR 2015-06-17 ENGVT
FH16 64 Tractor X-high Rear Air FH 64 T6CA
■ BBOX-L
Battery box on left hand side
■ 2BATT225
Batteries 2x225 Ah
□ BAMAFREE
Maintenance free batteries
■ BATTAMP
□ BATTIND
Battery voltage and ampere gauge
Battery voltage, ampere and battery status gauge with visual
alerts
□ ADR1
ADR adaptation, transportation of dangerous goods, 1 switch
(inside cab)
ADR adaptation, transportation of dangerous goods, 2
switches
□ ADR2
□ MSWI-A
■ MSWI-C
□ MSWI-R
■ R330A71
ADR main switch - ADR switch circuit shut down
Chassis main switch - battery box placed toggle switch citcuit
shut down
Remote controlled main switch - remote controlled (key fob)
circuit shut down
Right 330 litre aluminium 710 mm high D-shaped diesel tank.
Usable volume is 97% of stated volume.
Min volume 150l
Max volume 650l
Without left diesel tank
□ ADTP-BC
□ ADTP-L
■ ADTP-R
AdBlue tank behind/under cab on right hand side
AdBlue tank on left hand side (for dual front axles between the
axles)
AdBlue tank on right hand side
□
■
□
□
□
AdBlue tank usable volume 48 litres
AdBlue tank usable volume 64 litres
AdBlue tank usable volume 65 litres
AdBlue tank usable volume 68 litres
AdBlue tank usable volume 90 litres
■ FUFF-AS
□ FUFF-ATS
Fuel filling anti-spillage device
Fuel filling anti-theft and anti-spillage devices
□ ESH-LEFT
■ ESH-REAR
□ ESV-VERT
Horizontal muffler, left exhaust outlet
Horizontal muffler, rear exhaust outlet
Vertical muffler, vertical exhaust outlet on right hand side
□ EXST-SSP
□ EXST-ST
Bright polished stainless steel exhaust stack
Steel exhaust stack
□ WHC-FIX2
□ WHC-FOL2
Two fixed wheel chocks
2 foldable wheel chocks
□ WHCP-F
Wheel chock(s) in the front part of the vehicle.
- TRACTOR, BBOX-L, Fold, 1/2 w chocks
= Top of
left side battery box
- TRACTOR, BBOX-EF, Fold, 1/2 w chocks
= Top of
lefts side fuel tank
- TRACTOR, BBOX-EF, Fix, 2 w chocks
= Left
frame front of fuel tank
- RIGID, 1 front axle, Fold, 1/2 w chocks
= Top of left
side battery box
- RIGID, 2 front axles, Fold, Frame free space, 2 wc = Top of
left side battery box
- RIGID, 2 front axles, Fix, W/o frame free space,2 wc = Left
frame behind 1st front wheel
Wheel chock(s) in the middle part of the vehicle
- TRACTOR, BBOX-L, Fix, 1/2 w chocks
= Left frame front
of rear wheels
- RIGID, 1 front axle, Fix, 1/2 w chocks = Left frame front of
(or behind) rear wheels
Transport mounted wheel chock(s) in cab outer luggage
compartment
□ TB-L80
Left toolbox 800 mm length (mounting length 800 mm, real
length 730 mm)
□ TB-R80
Right toolbox 800 mm length (mounting length 800 mm, real
length 730 mm)
□ SUP-BAS
■ SUP-LOW
Standard side underrun protection
Low side underrun protection
■ Standard Equipment
■ TOWF-NO1
□ TOWF-NO2
One front towing device
Two front towing devices
□ TOWR-ONE
One rear towing device in frame end cross member
□ TREL15
□ TREL7
■ TREL7-7
15 pol electrical trailer connector (ADR certified)
7 pol electrical trailer connector (24N)
2x7 pol (24N+24S) electrical trailer connectors (UADR)
■ TBC-EC
Trailer brake connection, Europan Community
□ TRBR-HCR
■ TRBR-STA
Reduced pressure hand controlled trailer brake (4 bar)
Stationary trailer brake control
■ RFEND-B
Rear 3 piece fenders with anti-spray function (all rear axles)
■ RFH-BAS
Optimal fender installation (rear and 2nd front axle) with regard
to legal demands, wheel/tyre sizes, chassis height and fifth
wheel height.
Highest fender installation (rear and 2nd front axle).
Suitable for rough and very rough road conditions.
Lower fender installation (rear and 2nd front axle).
Suitable only for smooth road conditions.
□ RFH-LOW
□ ATANK-AL
■ ATANK-ST
Aluminium air tanks
Steel air tanks
□ TL-LED
LED tail lamps
■ BLIGHT-E
Emergency brake light
□ RT-AL
Lockable diesel and AdBlue tank caps
□ WHCP-T
Snow chain hooks.
Rear mounted for tractors and side mounted in rear overhang
for rigids. Two hooks on each side.
Rims and Tyres
■ FCAP-L
□ WHCP-M
Snow chains
□ HOOK-SC
□ RFH-HIG
■ UL-FUEL
ADB048
ADB064
ADB065
ADB068
ADB090
□ CHAIN-S
■ RT-STEEL
Brushed aluminium rims with std holes (long stud fixing) on all
axles
Dura-Bright polished aluminium rims with std holes (long stud
fixing) on all axles
Dura-Bright polished aluminium rims with countersunk holes
(short stud fixing) on all axles
Brushed aluminium rims with countersunk holes (short stud
fixing) on all axles
Polished aluminium rims with std holes (long stud fixing) on all
axles
Polished aluminium rims with countersunk holes (short stud
fixing) on all axles
Steel rims on all axles
□ WCAP
Wheel caps
■ SPWT-F
Spare wheel with tyre equal to front wheel
□ SWCP-T
Temporary spare wheel carrier.
Spare wheel is transport mounted (strapped on top of the
frame rails) with plastic stips.
Spare wheel carrier transport mounted with the spare wheel on
top of the frame rails
□ RT-ALDP
□ RT-ALDPD
□ RT-ALDU
□ RT-ALP
□ RT-ALPDU
■ SWCP-TP
■ JACK-15T
Jack 15 tonnes
■ TOOLKIT
Extended tool kit
□ INFLAHOS
Tyre inflation hose (18 metres)
□ GAUGE-TP
Tyre pressure gauge
Powertrain equipment
□ TRAP-HD
Reinforced gearbox application.
For manual gearboxes a heavy-duty nodular iron range
housing.
For I-shift gearboxes (2412 excl.) a reinforced gear shifting
system.
□ TP-BAS
□ TP-DICON
I-shift City gear changing software
I-shift Distribution and Construction optimized gear changing
software
I-shift Long Haul & Fuel Economy gear changing software
I-shift Long Haul & Fuel Economy+ gear changing software
prepared for using GPS positioning (locally stored road
□ TP-FUEC
□ TP-FUEC2
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
3 (7)
Ref: FH 64 T6CA 01 KOR 2015-06-17 ENGVT
FH16 64 Tractor X-high Rear Air FH 64 T6CA
□ TP-FUEC3
□ TP-HD
□ HPE-T70
memory, I-See)
I-shift Long Haul & Fuel Economy+ gear changing software
prepared for using GPS positioning (centrally stored road
memory, I-See).
5 years prepaid subscription of shared topography data
included.
I-shift Heavy Duty gear changing software
□ HPE-V120
□ HPE-V45
□ HPE-V75
□ AMSO-AUT
I-shift manual gear shift available in automatic mode incl
kickdown function
□ PTR-D
□ AVO-ENH
Enhanced I-shift software for construction and off road
applications
□ PTR-DH
□ APF-ENH
Enhanced I-shift PTO functions (Auto Neutral / Reverse Inhibit
/ Split Box Connection)
□ PTR-DM
■ CD40B-O
□ CS43B-O
Double plate clutch, plate diameter 400 mm
Single plate clutch, plate diameter 430 mm
□ RET-TH
Retarder for manual and I-shift gearboxes
□ TC-MAOH2
Extra high performance cooler for manual/I-shift gearboxes air/oil
Basic performance cooler for manual/I-Shift gearboxes water/oil
High performance cooler for manual/I-Shift gearboxes water/oil
High performance cooler for manual gearboxes with retarder air/water/oil
High performance cooler for manual gearboxes with retarder –
air/oil (cooler integrated in retarder)
□ TC-MWO
□ TC-MWOH2
□ TC-RAO
□ TC-RWO
□ PTR-F
□ PTR-FH
□ PTR-FL
□ PTRD-D
□ PTRD-D1
□ PTRD-D2
□ PTRD-F
Rear engine mounted hydraulic pump F2-70/35, fixed
displacement, twin flow
Rear engine mounted hydraulic pump VP1-120, variable
displacement, single flow
Rear engine mounted hydraulic pump VP1-45, variable
displacement, single flow
Rear engine mounted hydraulic pump VP1-75, variable
displacement, single flow
Mechanical gearbox driven low speed power take-off, 1 rear
DIN connection for plug-in pump (max. 1000 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
DIN connection for plug-in pump (max. 600 Nm)
Mechanical gearbox driven medium speed power take-off, 1
rear DIN connection for plug-in pump (max. 600 Nm)
Mechanical gearbox driven low speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 1000 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 600 Nm)
Mechanical gearbox driven low speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 600 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
DIN/1 front DIN connections for plug-in pumps (max. 870 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
SAE flange connection for propeller shaft/1 front DIN
connection for plug-in pump (max. 870 Nm)
Mechanical gearbox driven power take-off, 2 rear SAE flange
(high-low speed) connections for propeller shafts/1 front DIN
(high speed) connection for plug-in pump (max. 870/1000 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 870 Nm)
□ 2COM1080
□ 2COM1100
■ 2COMP900
Dual cylinder air compressor 704 cc / 1080 l/min
Dual cylinder air compressor 760 cc / 1100 l/min
Dual cylinder air compressor 636 cc / 900 l/min
□ CLU-AIRC
Air compressor clutch automatically declutched when not
needed in order to save fuel
□ AIRIN-FR
■ AIRIN-HI
□ AIRIN-LO
Front air intake
High air intake
Low air intake
■ STWPOS-L
Left hand drive
■ ACL1ST-S
Air cleaner with additional filter element (primary + secondary)
■ STWM-LE
Leather steering wheel
■ 24AL120B
□ 24AL150B
Alternator 120 Ampere
Alternator 150 Ampere
□ STGW-AD2
■ STGW-ADJ
Mechanically adjustable steering wheel with neck tilt
Mechanically adjustable steering wheel
■ CCV-C
□ CCV-O
Closed crankcase ventilation
Open crankcase ventilation
□ AIRBAG
Airbag on driver side
□ INST-BAS
□ HPG-F81
□ HPG-V120
Gearbox mounted hydraulic pump F1-81, fixed displacement,
single flow
Gearbox mounted hydraulic pump VP1-120, variable
displacement, single flow
□ EIDLESD
Engine idle shut down
Cab Interior, Driving
■ PRIM-EL
Electrical priming pump
□ AF-E
■ AF-R
Electrically heated fuel filter
Hot fuel recirculation heated fuel filter
■ INST-MED
Basic level instrument cluster - 4 inch monochrome display
240x320 pix
Medium level instrument cluster - 4 inch colour display
240x320 pix
□ FUEFE2LW
Large engine mounted dual fuel filter with water separator and
drain.
Suitable when poor (e.g. high sulphur content) fuel quality
(normally not in Western Europe).
□ 1DAYB
■ TAC-PK2
One day analogue tachograph, basic
Preparation kit tachograph, TAS-PK, TAC-PK
□ ARSL
Additional road speed limit (switch in dashboard)
□ DTRI-PER
FH: Dashboard, steering wheel cover and door panels in
greyish brown (peregrine).
FH16: Dashboard in greyish brown, steering wheel cover and
door panels in black (raven).
Dashboard and steering wheel cover in light beige (skylark),
door panels in light beige for FH and black (raven) for FH16.
■ EST-AID
Engine start pre-heating element
□ 220EBH15
Engine block heater, 220 volt, 1.5 kW
□ PTER-100
Rear engine mounted clutch independent power-take-off with
DIN 100 / ISO 7646 flange
Rear engine mtd clutch independent PTO with DIN5462
(female) splined shaft for a close coupled pump
□ PTER-DIN
□ HPE-F101
□ HPE-F41
□ HPE-F51
□ HPE-F61
□ HPE-F81
□ HPE-T53
□ DTRI-SRA
□ CRUIS-E
Rear engine mounted hydraulic pump F1-101, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-41, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-51, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-61, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-81, fixed
displacement, single flow
Rear engine mounted hydraulic pump F2-53/53, fixed
displacement, twin flow
■ Standard Equipment
■ CRUISEC
Cruise control I-Cruise with controls in the steering wheel and
I-Roll included. To also have the I-See function the I-Shift
software package TP-FUEC3 or TP-HD3 must be selected.
Basic cruise control with controls in steering wheel
□ ESP-BAS1
Basic Electronic Stability Program (ESP) package
□ HWSS-AC
□ HWSS-ACB
Adaptive cruise control with forward collision warning
Adaptive cruise control with forward collision warning and
emergency braking
Forward collision warning (stationary and moving objects) with
emergency braking
□ HWSS-FCB
□ LSS-DW
Lane keeping support - lane departure warning system
□ LCS
Lane Change Support
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
4 (7)
Ref: FH 64 T6CA 01 KOR 2015-06-17 ENGVT
FH16 64 Tractor X-high Rear Air FH 64 T6CA
□ DAS-W
Driver Alert Support (drowsy driver warning)
□ RSENS-W
Wiper rain sensor
■ CU-ECC
□ CU-ECC2
□ CU-MCC
Fully electrically controlled air conditioning with sun sensor
Fully electrically controlled air conditioning with sun sensor,
mist sensor, air quality sensor and carbon filter
Electrical manually controlled air conditioning
■ IMMOBIL
Immobiliser
□ ALARM-B
□ ALARM-E
Burglar alarm - cab
Burglar alarm - cab/body/trailer
□ PHONE-PK
Telephone preparation kit (antenna, antenna attachm. and
cable incl.)
■ WLIFT-AD
Electrical window lift, auto up/down driver side
□ ISUNS-BS
■ ISUNS-DS
Side interior sun visor on both sides
Side interior sun visor on driver side
□ ISUNF-RE
■ ISUNF-RM
Electrical textile interior sun visor (roller blind) integrated in
front shelf
Manual textile interior sun visor (roller-blind) integrated in front
shelf
■ CSPL-BX
□ CSPL-BXD
Open storage in lower center dash panel
Storage drawer in lower center dash panel
□ CSPU-SDR
■ CSPU-SS
One open storage and one drawer (behind push open lid) in
upper part of dash panel center section
Two open storages (behind push open lid) in upper part of
dash panel center section
□ ADFS
Two extra DIN slots in front shelf (push/pull storage)
■ BUPALARM
Back-up alarm
□ BUPMON
Back-up monitor including a 7 inch colour display integrated in
dashboard, Waeco CCD-camera (delivered loose in cab) with
a heated lens, motorised lens protection, 1 m pigtail cable
(front) and 10 metres chassis cable for tractor /20 metres for
rigid. Camera wirings not installed. Use PCA30081 for
installation.
□ DST-STD2
heated, ventilated
Driver seat, de luxe, suspended, belt in seat, electrically
heated, ventilated
Driver seat, reagular, suspended
□ SBPRE-DS
Driver seat belt pretensioner
□ PST-CF2
□ PST-CF4
□ PST-CF5
Passenger seat, comfort, suspended, electrically heated
Passenger seat, comfort, suspended, belt in seat
Passenger seat, comfort, suspended, belt in seat, electrically
heated
Passenger relax seat, swivel/tilt
Passenger relax seat, swivel/tilt/heat
Passenger seat, regular, non suspended
Passenger seat, regular, suspended
□ DST-LUX1
□
□
■
□
PST-RX1
PST-RX2
PST-STD2
PST-STD4
□ SBPRE-PS
Passenger seat belt pretensioner
■ ARMRE-BB
Two armrests on both driver and passenger seats
□ ARU-BAS
■ ARU-LEA
Vinyl armrest upholstery
Leather armrest upholstery
□ GRABHI-B
■ GRABHI-L
Steel instep grab handle
Leather covered steel instep grab handle
□ FMAT-RUB
■ FMAT-TX2
Two black rubber floor mats
Two textile (dark grey on FH/FM, black on FH16) and two
black rubber floor mats
■ LBK80F
Lower fixed bunk, foldable 55 degrees - 2000x815/740/660
mm (middle/head/feet).
Safety net included.
Lower electrically manoeuvred recline bunk, foldable 55
degrees - 2000x815/740/660mm (mid/head/feet). Safety net
included.
Lower manually manoeuvred recline bunk, foldable 55 degrees
- 2000x815/740/660 mm (mid/head/feet). Safety net included.
□ LBK80FRE
□ LBK80FRM
□ MATL-FI
■ MATL-SF
□ MATL-SO
Mattress lower bunk - firm, pocket springs
Mattress lower bunk - semi-firm, pocket springs
Mattress lower bunk - soft, pocket springs
□ OLMAT-BA
■ OLMAT-PR
Overlay mattress protector, 20 mm thick black textile
Overlay mattress protector, 30 mm thick black textile
Height adjustable top bunk 600x1900 mm, foldable up to 52
degrees to rear wall (depending on cab version and upper
storage). Safety net included.
Fixed top bunk 600x1900 mm, foldable up to 52 degrees to
rear wall (depending on cab version and upper storage). Safety
net included.
Height adjustable top bunk 700x1900 mm, foldable up to 52
degrees to rear wall (depending on cab version and upper
storage). Safety net included.
Fixed top bunk 700x1900 mm, foldable up to 52 degrees to
rear wall (depending on cab version and upper storage). Safety
net included.
□ LOADIND
Load indicator with dashboard display.
Measures axle pressures, load weight and total weight of truck
and one trailer.
□ TBK60AD
□ REMC-MF
Wireless remote control - multi functional
□ TBK60F
■ FIREXT3S
Fire extinguisher 3 kg, Swedish/English decal
□ WARNVEST
Warning vest
■ WARNTRI2
Two warning triangles
□ AIDKIT
First aid kit containing sticking plaster, washing and drying
pads, compresses, elastic bandages, respiratory mask, gloves
and scissors
■ WRITEPAD
Writing pad
□ TBK70AD
Cab Interior, Living
□ UPHTRI01
■ UPHTRI04
□ UPHTRI05
□ UPHTRI08
□
■
□
□
DST-CF1
DST-CF2
DST-CF4
DST-CF5
□ DST-CF6
Seat upholstery with black embossed textile insert, black vinyl
bolster and red vinyl side insert & vinyl interior trim in matching
grey nuances
Seat upholstery with black/green textile insert, black leather
bolster & green/yellow leather side insert & soft textile interior
trim in matching grey, green and black colours
Seat upholstery with dark grey leather insert and black leather
bolster & vinyl interior trim in matching grey nuances
Seat upholstery with black/green/yell perforated leather insert,
black leather bolster& green/yell side insert & soft textile
interior trim in matching grey, green and black colours
Driver seat, comfort, suspended
Driver seat, comfort, suspended, electrically heated
Driver seat, comfort, suspended, belt in seat
Driver seat, comfort, suspended, belt in seat, electrically
heated
Driver seat, comfort, suspended, belt in seat, electrically
■ Standard Equipment
□ TBK70F
□ PH-CAB2
Cab parking heater, 2 kW
□ CPC-ADV
Advanced cab parking cooler with 120V DC electrical
compressor
■ SLCP-BAS
□ SLCP-LUX
Basic sleeper control panel (controlling interior light, parking
heater, roof hatch and door lock)
Luxuary sleeper control panel in cab back (controlling interior
light, parking heater/cooler, roof hatch, door lock, alarm clock,
window and audio)
□ SAFE
Lockable safety box at bed end
□ RUS-BAS
□ RUS-HIG
Rear cab upper storage 154 litres (300 mm high)
Rear cab upper storage 245 litres (440 mm high)
□ TABLE
Foldable and height adjustable table to be mounted to the
lower bunk
□ REFR-RUS
□ REFRIG
28 litre rear upper wall mounted refrigerator with deviders
33 litre under bunk mounted refrigerator with freezer and
deviders
□ MICRO-PK
Preparation kit for microwave oven (el. cables)
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
5 (7)
Ref: FH 64 T6CA 01 KOR 2015-06-17 ENGVT
FH16 64 Tractor X-high Rear Air FH 64 T6CA
□ BOTH-D
□ BOTH-DL
□ BOTH-L
One bottle holder under dashboard centre section
Two bottle holders, one under dashboard centre section and
one mounted to the under bunk drawer
One bottle holder mounted to the under bunk drawer
□ AD-SIDEL
□ AD-SIDES
Long cab side air deflector
Short cab side air deflectors
□ COFMA-PK
Preparation kit for coffee maker
□ AD-CHASX
Chassis side skirts
□ ADCF-F
Additional flap on chassis fairings
■ HL-BASIC
□ HL-BHID
□ HL-DBL
Halogen H7 head lamps
Bi-Xenon head lamps, high intensity discharged
Bi-Xenon dynamic head lamps, high intensity discharged.
The dipped beam follows the road, activated by a signal from
the steering system.
Activated when driving with Drive+ (D+) on the light control
switch.
Active at speeds between 10-25 km/h (set by driver).
Operates at +15 to -8 degrees.
□ INLI-BAS
□ INLI-NL
■ INLI-NLD
(chassis height, cab type, tyres etc).
Interior white light with smooth light transition at on/off, no
dimming
Interior white and red (night) light with smooth light transition at
on/off
Interior white and red (night) light with smooth light transition at
on/off and dimmer
□ ARL-FLEX
Two flexible reading lamps (snake lamps)
■
□
□
□
Without roof hatch, sky window / emergency exit (tinted glass)
Roof hatch - Electrically operated / Tinted glass / Rear opening
Roof hatch - Manually operated / Tinted glass / Rear opening
Without roof hatch
□ HL-CLEAN
High pressure headlamp cleaner
Extra side window on both sides
□ HLP-ST
Steel headlamp protection
■ VANMIR
Vanity mirror in front shelf
■ HL-ADJ
Adjustable headlights
□ AS-FUS
Extra shelf in front upper storages.
Only 1 shelf if microwave oven mounted in one compartment.
■ DRL-LED
□ UDRL
V-shaped ("V-light") day running light (LED).
Turned on low beam gives a dimmed "V-light".
Without day running light (dimmed V-light)
□ INFOT-PK
Preparation kit (bracket, security straps, power cable, antenna
cable and aux cable) for mounting of TV above driver door
□ DRIVL2
■ UDRIVL
Two auxiliary front driving lamps
Without auxiliary front driving lamps
■ FOGL-WC
White front fog lamps
□ CL-STAT
Cornering lights
□ ASL-RF2
Two Hella H11 70W spot lamps in sign box (one on each side
of the Globetrotter sign)
□ IDLAMP-A
□ IDLAMP-W
Three middle front roof mounted amber identification lamps
Three middle front roof mounted white identification lamps
□ IDLMPSW
Switch in cab for identification lamps
Two front roof mounted amber rotating beacon warning lamps.
Mounted on accessory bracket if ordered, otherwise on cab
roof on both sides of the hatch.
Two rear roof mounted (on accessory bracket) amber warning
lamps.
Rotating beacon lamps mounted on sleeper cab.
Flashing LED lamps mounted on high/extra high sleeper cabs.
Prepared wiring (switch and connected relay included) for
warning lamps on cab roof.
Max load 300 W.
Four roof mounted amber warning lamps.
2 front mounted (on accessory bracket if ordered) rotating
beacon lamps.
2 rear mounted (on mandatory accessory bracket) rotating
beacon lamps on sleeper cab.
2 rear mounted (on mandatory accessory bracket) flashing
LED lamps on high/xhigh sleeper cabs.
RH-EE
RH-ETR
RH-MTR
URH
□ SWIND-BS
Cab Exterior
□ EXTL-BAS
■ EXTL-ENH
Basic exterior finish in a lightning grey colour of cab
surrounding parts (mirror housings, insteps, bumper and if
fitted bumper spoiler and sun visor).
If fitted roof air deflector, side air deflector and chassis fairings
are always painted in cab colour.
Enhanced cab exterior finish (cab painted insteps & bumper
(bumper spoiler if fitted), mirror housings (FH16 silver painted),
sun visor if fitted (FH16 silver painted) and door handle (FH16
chrome)).
■ GLAS-TIN
Tinted windows
□ BEACOA2F
■ DGLAS-H
□ DGLAS-L
Tempered door glass
Laminated door glass
□ BEACOA2R
□ LOCK-CTL
■ LOCK-REM
Central door locking
Central door locking with remote control
■ BUMP-B2
□ BUMP-HD
Steel front bumper
Heavy duty front bumper
□ AUXFS
Extra cab side foot-step
□ GUARD-EH
Guard plate for cooling pipes and oil sump
■ BUGNET
Radioator screen.
Mosquito net in front of radiator
□ CTILTP-E
■ CTILTP-M
Electrical cab tilt pump
Manual cab tilt pump
□ FCABS-A
■ FCABS-M
Air front cab suspension
Mechanical front cab suspension
□ RCABS-A
■ RCABS-M
□ BEACON-P
□ BEACONA4
□ CABPT-R1
■ CABPT-R2
One front cab roof pass through on passenger side
Two front cab roof pass throughs, one on each side
Air rear cab suspension
Mechanical rear cab suspension
□ SPOTP-F
□ SPOTP-R
□ SPOTP-RF
□ HCC-EXT
■ HCC-INEX
Exterior hood catch control
Exterior and interior hood catch control
Spotlamp preparation in cab front, max 280W
Spotlamp preparation on cab roof, max 280W
Spotlamp preparation on cab roof and in cab front, max
2x280W
□ ROS-IL
Illuminated roof sign with switch in radio shelf
□ MIRCOMF
Electrically heated & operated main rear view mirrors and
wide angle mirrors (both sides).
Close view mirror on passenger side.
Electrically heated main rear view mirrors and wide angle
mirrors (both sides), both electrically operated on passenger
side. Close view mirror on passenger side.
□ CSGN-ENG
□ CSGN-GTR
Engine and Horsepower decal in the cab roof sign area
GLOBETROTTER decal in the cab roof sign area
■ HORN-F1S
One front mounted (behind grille) single tone air horn, Jericho
□ ANT-CBR
Roof mounted antenna for CB radio, single aerial
□
□
□
□
□
□
Front, middle & rear roof mounted accessory brackets
Front roof mounted accessory bracket
Front & middle roof mounted accessory brackets
Front & rear roof mounted accessory brackets
Middle roof mounted accessory bracket
Rear roof mounted accessory bracket
■ MIRSTD
■ AMIR-FCR
Front close view mirror at right hand side corner
□ SUNV-H
Exterior smoke coloured front sun visor
□ AD-ROOF
Roof air deflector. Design (length, height etc.) automatically
calculated and varies depending on vehicle total height
■ Standard Equipment
ACCBR-AP
ACCBR-F
ACCBR-FM
ACCBR-FR
ACCBR-M
ACCBR-R
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
6 (7)
Ref: FH 64 T6CA 01 KOR 2015-06-17 ENGVT
FH16 64 Tractor X-high Rear Air FH 64 T6CA
□ ACCBR-RM
Rear & middle roof mounted accessory brackets
□ STUC-B
□ STUC-L
□ STUC-R
Left and right storage compartments under cab
Left storage compartment under cab
Right storage compartment under cab
□ LADDER
Ladder back of cab
□ REFS-TW
□ REFS-TY
Reflecting white cab side stripes by-packed in cab
Reflecting yellow cab side stripes by-packed in cab
Superstructure preparations
□ 5WM-ISHD
□ 5WM-ISOM
Fifth wheel ISO mounting on 16 mm mounting plates for heavy
duty applications
Fifth wheel ISO mounting on medium L-profiles (t=8 mm) with
10 mm ISO tie plate.
L-profile height above frame = 50 mm.
Total height above frame 60 mm.
□
□
□
□
5WH150
5WH185
5WH190
5WH290
Fifth
Fifth
Fifth
Fifth
□
□
□
□
□
□
5WT-JO11
5WT-JO8
5WT-JO9
5WT-JOHD
5WT-SH
5WT-SH2
Jost JSK 38G cast iron heavy duty fixed fifth wheel
Jost JSK 37 cast iron fixed fifth wheel
Jost JSK 42 cast iron fixed fifth wheel
Jost JSK 38C cast iron heavy duty fixed fifth wheel
SAF-Holland/+GF+ SK-S 36.20 V cast iron fixed fifth wheel
SAF-Holland/+GF+ SK-HD 38.36 cast iron heavy duty fixed
fifth wheel
wheel leg-height 150 mm
wheel leg-height 185 mm
wheel leg-height 190 mm
wheel leg-height 290 mm
□ 5WLM-B
Basic fifth wheel maintenance
□ 5WL-S1
Fifth wheel lubrication - locking mechanism and top plate
□ TCIND
Trailer connection indication with sensors for height, kingpin
and coupling lock
□ RAMP-LOW
□ RAMP-MED
Low height sliding members/protection members
Medium height sliding members/protection members
■ RDECK
Basic rear deck (one plate between frame rails and one over
left fuel tank or left battery box)
Medium rear deck (two plates between frame rails and one
over left fuel tank or left battery box)
□ RDECK-M
□ SRWL-2RA
□ SRWL-2RW
□ SRWL-PK
□ SWL-2RA
□ SWL-2RW
□ SWL-PK
□ WL-TA1A
■ WL-TA1W
□ WLC-H2A
□ WLC-H2W
□ WLC-PKH
□ WLC-PKL
□ WLC-PKLH
■ ECBB-BAS
□ ECBB-HIG
Body builder electrical centre without body builder module
Body builder electrical centre with body builder module
□ BBCHAS1
□ BBCHAS3
One 7-pole connector for Body builder interface
Three 7-pole connectors for Body builder interface
□ BEPR-T2
Body builder electrical software preparation for tipper with
remote control
■ TD-BAS
□ TD-LED
Trailer detection without LED sensor
Trailer detection with LED sensor
□ AUXL-SPK
Electrical preparation kit (wiring and switch) for snow plough
lights.
Preparation for installation of additional headlights and
additional turning indicators.
□ TAILPRE2
□ TAILPREP
Tail lift preparation kit, wireless remote operation
Tail lift preparation kit, wire remote operation
□ AESW2
Two Body builder bistable electrical switches (marked AUX1 /
AUX2)
Two Body builder bistable electrical switches (marked
AUX1/AUX2) and in an empty 4-group preparation for another
four bistable switches with dummy switch caps
□ AESW2PK
□ AUXSW-4
Wiring for 4 extra hardwired switches (from Body builder
electrical centre to switch positions)
Services
□ TGW-3GWL
■ TGW-PK
Telematics gateway with 3G modem and WLAN
Telematics gateway preparation kit
□ TESP-T
Driver Service Platform
Two H3 35W amber rear chassis mounted (LH/RH side)
working lamps and a 3-position switch (On/Off/Reverse auto
on)
Two H3 70W white rear chassis mounted (LH/RH side)
working lamps and a 3-position switch (On/Off/Reverse auto
on)
Wiring preparation for chassis mounted working lamps and a
3-position switch (On/Off/Reverse auto on).
Max load 280W.
Two H3 35W amber rear chassis mounted (LH/RH side)
working lamps and a 2-position switch (On/Off)
Two H3 70W white rear chassis mounted (LH/RH side)
working lamps and a 2-position switch (On/Off)
Wiring preparation for chassis mounted working lamps and a
2-position switch (On/Off). Max load 280W.
Trailer arch working lamp with amber coloured lens and
H3/35W bulb
Trailer arch working lamp with white lens and H3/70W bulb
Two H3/70W working lamps with amber coloured lens high
mounted back of cab (switch incl).
Two H3/70W working lamps, white lens high mounted back of
cab (switch incl).
Preparation kit (cables and switch) for high mounted working
lamps back of cab (pass through in cab rear roof included).
Max load 280W.
Preparation kit (cables and switch) for low mounted working
lamps back of cab (pass through in cab rear wall included).
Max load 280W.
Preparation kit (cables and switch) for low and high mounted
working lamps back of cab (pass throughs in rear wall and rear
roof included). Max load 280W.
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
7 (7)
Ref: FH 64 T6CA 01 KOR 2015-06-17 ENGVT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement