amazon bubbler

amazon bubbler
AMAZON BUBBLER
BUBBLER/PRESSURE SENSOR
Designed with simplicity in mind, the Amazon bubbler is the ideal
system for long-term, water level monitoring sites. It can be used as a
stand-alone system with internal data storage, or as a sensor connected
to any manufacturers data logger. Easily configure and collect data
using the browser-based graphical user interface with all standard
web browsers on PCs, tablets and smart phones. It’s rugged build,
and technologically advanced system makes the Amazon Bubbler an
attractive solution for real-time monitoring and data collection.
The Amazon provides a continuous air bubble and an integrated
pressure sensor that measures the pressure required to push the
bubble out of the orifice line, which is the line pressure. The line
pressure value measured in psi is then converted into the desired
units of measurement to represent water level.
APPLICATIONS
Accurately measure stream, lakes, wells, ocean and waste water levels.
KEY FEATURES
• Advanced rugged design
• Internal data logging
• Intuitive menu configuration
• High accuracy 0.02% FS
• Multiple output and connection
options (SDI-12, Modbus, 4-20 mA,
USB, Ethernet)
D59-06 0616
• Optional low-powered display for
complete system configuration and
data display.
• “Powered by Storm” technology:
• W-Fi Connection Interface
• Storm Central Connectivity
• Browser based software
• Range options:
• 0 to 10.5 m (34.6 ft)
• 0 to 21 m (69.2 ft. )
• 0 to 35 m (115 ft. )
Amazon Bubbler
*shown with optional display
SPECIFICATIONS
PERFORMANCE
Accuracy
Pressure
Range
Pressure
Depth
Accuracy
0 to 15 PSI
0 to 10.54 m
(34.6 ft)
±2.1 mm
(0.007 ft)
0 to 30 PSI
0 to 21 m
(69.20 ft)
±4.3 mm
(0.014 ft)
0 to 50 PSI
0 to 35.15 m
(115.34 ft)
±7.11mm
(0.02333 ft)
Bubbler
Gas Delivery
Purge
Functions
Compressor
General
Less than or equal to 0.02% of full
scale output (FSO) over
temperature range
Connection
Constant mass Technology
Gas Flow
Control
Bubble rate is user programmable
from 30 to 120 bubbles per minute
based on 6.35 mm (1/4 in.) tubing.
Purge Pressure
Level
User Selectable 40 PSI to 90 PSI
Options
• Manual
• SDI driven purge
• Purge sustain option (10 to 30 sec)
• Automatic/programmable
20 V DC
Quick Connect
Phoenix
Connectors
2-position quick connect for power
5-position quick connect for SDI-12,
4 to 20mA, and RS-485
3.82 cm (1/8 in) female NPT
Pressure Inlet
COMMUNICATION
SDI-12
Baud Rate
Protocol
Output Voltage
Levels
Response Time
Microprocessor controlled unit
Gas Flow
Technology
Surge
Protection
RS-485
4-20mA
Output
Baud Rate
Protocol
Type
Loop Voltage
Resolution
Accuracy
Type
Piston Compressor
Operation
Low duty cycle (15 hours typical
runtime per year at 60 bubbles per
minute into 3.7 m (12 ft.)
(purges not included)
Pressure
Overload
Up to 2 times the rated pressure
Media
Capability
Non-corrosive dry gases only
Rating
NEMA 4 enclosure
1200
SDI-12 V1.3, 7-bit even parity, 1 stop
bit
Minimum high level: 3.5 volts
Maximum low Low: 0.8 volts
8-second measurement sequence
(programmable)
Programmable (default = 9600)
Modbus RTU
4-20mA, optically isolated
8.0V min, 35V max
±0.24 uA (16-bit DAC)
0.075% max error
ENVIRONMENTAL
General
Operating
Temperature
Compensated
Range
Storage
Temperature
-40° to +60° C
-40° to +60° C
-60° to + 80° C
MISCELLANEOUS
Warranty
Note
The Amazon Bubbler is warranted against defects in
materials and workmanship for two years from date of
shipment.
Specifications subject to change without prior notice
due to on going commitment to product testing and
improvement. LR May 2016 (D59-06 0516)
MECHANICAL / POWER
Size
Housing
311.15 mm L x 222.25 mm W x
146.05 mm H
(12.25 in. L x 8.75 in. W x 5.75 in.
H)
Weight
Housing
5.44kg (12.0 lbs)
Material
Housing
Aluminum
Atmospheric
Vent
Sintered bronze, #10-32
Voltage Input
Power
Requirements Current
10.0 to 16.5 V DC
Standby: 6mA
Compressor Active, No Pressure: 3 A
Compressor Active, Full Pressure: 6 A
Startup Surge Required: 15 A
Based on a 60 bubbles/min flow
rate with a 15 min measurement
cycle and a 1 purge/day frequency.
Average active current 20mA
YSI
1700/1725 Brannum Lane
Yellow Springs, Ohio, 45387, USA
Tel: (937) 767-2772
Fax: (435) 753-7669
[email protected]
ysi.com/amazon
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement