FENCE WEAVE"®
INSTALLATION INSTRUCTIONS
1. TO DETERMINE HOW MANY ROLLS ARE NEEDED,
JUST FOLLOW THIS EASY FORMULA: HEIGHT OF
FENCE X LENGTH OF FENCE + 40 = # ROLLS.
2. UNCOIL THE END OF FENCE WEAVE® AND
MEASURE AGAINST FENCE DIAGONALLY. CUT
STRIPS 3 INCHES LONGER TO ALLOW FOR 1 1/2" J
OVERLAP ON EACH END. (DIAGRAM 1) DIAGRAM 1
3. STARTING AT EITHER TOP OR BOTTOM OF FENCE,
LACE FENCE WEAVE® OVER ONE AND UNDER
THE NEXT WIRE RUNG OF FENCE. (DIAGRAM 2)
4. FOLD OVER THE 1 1/2" OVERLAP AND PUSH
FASTENER (INCLUDED) THROUGH FENCE WEAVE®
SPREADING PRONGS TO SECURE. (DIAGRAM 2) DIAGRAM 2
5. TIGHTEN OPPOSITE END TO TAKE OUT MOST OF THE SLACK
(CAUTION: LEAVE 1/2" SLACK FOR SHRINKING) AND INSERT FASTENER.
REPEAT STEPS 1 THROUGH 5 UNTIL FENCE IS COVERED. COMBINE 2 OR MORE COLORS
TO CREATE YOUR OWN DESIGNS. (DIAGRAM 3)
DIAGRAM 3
PATRICIAN PRODUCTS INC.
100 Frank Road ¢ Hicksville, NY 11801
Tel: 1-800-843-7528 ¢ Fax: 516-931-2701
Web: www.patricianproducts.com ¢ e-mail: [email protected]
">
