VERTICAL WALL TOWERS POWERBLAST
REARS
Made in the USA
VERTICAL WALL TOWERS
Louvered air vanes adjust discharge angle.
Individual target zone spray controls. Manual
or electric air discharge and spray controls.
Available with standard or split manifolds for
quick spray height variation control. Optional
adjustable air doors control discharge volume to
compensate for wind conditions.
500 gallon with
13' folding tower
NEW
500 gallon with
10' radius top tower
POWERBLAST ENGINE DRIVE
REARS ORCHARD SPRAYERS
with John Deere Powertech 4.5L diesel engine; 115 HP turbo charged.
Features:
• 400, 500 or 600 gallon stainless steel tanks
• 33" or 38" stainless steel fan
• Electric fan clutch
• Electric throttle
• Electric spray controls
• REARS centrifugal pump
• Stainless steel
fan housing
• Rollover no-drip
nozzles with
ceramic tips
500 gallon
with 38" fan
POWERBLAST SPRAYER
with OVER ROW TOWERS
NEW
Adjustable reach to accommodate your row spacing.
Air dams to tune target turbulence. Drop tubes and
duct arms break away independently for protection.
Folds for easy transport. Stainless steel construction.
Reduce overspray by directing air to tree center from
three directions at once. Improved coverage which
means better pest control.
Pictured on 500 gallon Narrow Powerblast with tandem axles
66
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
REARS
Powerblast Spray System
Flexibility for your application
Durability for performance you can count on
Stainless Steel Construction: tank, fittings & hardware,
mechanical agitation, hard plumbing, spray manifolds, fan housing
Rears Constant Velocity Hitch - for smooth 90° turns
under full loads, nothing beats a Powerblast
Rears Centrifugal Pump - 200PSI/80GPM
Rears Spray Control - manual, electric or hydraulic
Double-Rollover Nozzle Bodies - switch your
application rate with a simple twist
33"- 38" Diameter Axial Flow Fan - fitted to the
stainless steel fan housing for optimal performance
Our Best Selling
Orchard Sprayers
Time tested design, wide range of applications a flexible, durable system
Variety of model profiles available
REARS ORCHARD SPRAYERS
PUL-BLAST
100-500 gallon stainless steel tanks, multiple profile,
medium power, adaptive PTO machine. CV or standard
hitch, diaphragm or centrifugal pump, adjustable pitch
fans with a two-speed gear box make these sprayers
adaptable to many tractor sizes and power requirements.
All tanks are provided with mechanical agitation and
electric spray controls.
REARS
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
67
REARS
PAK-BLAST
The Pak-Blast adapts Rears' cutting edge air-blast sprayer design to 3 point mounted
applications. By nesting the heavy duty gearbox and pump within the tank profile, Rears
has shifted the center of gravity forward toward the tractor lift arms. The result is a highperformance sprayer that can be matched to the most compact orchard tractor.
Available in 50, 75, 100 and 150 gallon tank size.
The Pak-Blast has a selection of aluminum alloy axial flow fans - 24" to 28" diameter.
The fan is fitted to the fan housing to produce optimal performance. All fans
have variable pitch.
50 gallon Pak Blast, 24" fan
50 gallon Pak Blast
100 gallon Pak Blast
A200 Airblast Sprayer
Engine Drive Sprayers
3 PT/TRAILER AIRBLAST SPRAYERS
These small trailer sprayers offer the power of a tractor driven
sprayer with the versatility of a narrow self contained unit.
This 36" wide sprayer features a
Vanguard engine, 20" fan that
can be disengaged, Hypro D30
diaphragm pump, Teejet nozzles
with diaphragm checks, turf tires
and clevis hitch. Available in 50
and 100 gallon tank sizes.
Great for use with an ATV or small
garden tractor in Christmas trees,
vineyards, berry plantations and
dwarf orchards.
Durand Wayland PTO Sprayers
• AF505CPS - Highest
performance - 65"-78"
wide
• Silverliner - Medium
performance - for
medium or smaller
plantings - 64"-76" wide
• Microliner - Medium
performance - 48" wide,
for smaller apple,
raspberry or grape
plantings
68
Jacto A200 airblast
sprayers deliver big
performance in a small
package. Filled with
features that ensure long
life, excellent durability
and maximum crop
protection for hobby
farmers and small
growers, Jacto designed
the A200 to economically
meet the demands of
orchard, vineyard,
Christmas tree, berry,
and other fruit and nut applications. Specifically designed for
compact tractors working in tight areas.
PTO Driven REDLINE Sprayers
300, 400, 500 or 600
gallon stainless steel
tanks with mechanical
agitation, conventional
or tracking hitch
models, 28", 32" or 36"
fans and diaphragm,
piston or centrifugal
pumps.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
AgTec, Jacto and MS manufacture rotating head row crop air sprayers available in 3 pt. hitch and trailer versions.
We also offer row crop volutes that can be attached to existing orchard airblast sprayers for use in row crops.
J-400
Jacto J-600
Jacto J-400
3 pt. hitch, 105 gallon polyethylene tank with
mechanical agitation, 37 gpm, centrifugal
pump three outlet cannon head with
hydraulic lift and rotation available. 40 pto
HP required 60' plus swath. Pictured above.
JAC 142190
3 pt. hitch, 158 gallon polyethylene tank
with mechanical agitation, 35 gpm, pto
driven centrifugal dual stage pump with
hydraulic head rotation and deflector
setting. 50 pto HP required 90' swath.
J-600
JAC 339259
The J-600 CHT is a new
version of the J-600 export,
designed for farmers who
have been using the
hydraulic system of
the tractor to move the
cannon head both vertically
and horizontally while
spraying.
AIR ROW CROP SPRAYERS
MS Super Canons
General features
• Polyethylene tank
• Centrifugal pump
• Fan lock release knob
• Fiberglass air duct, corrosion
resistant
• 230° cannon rotation
• 35° (+20°, -15°) cannon
vertical adjustment
• Clean water dispenser
• 3 section electric control, 300psi
R1915 Trailer Canon Sprayer
P1135 Canon Sprayer
AGTEC 3004
Large capacity 3 Pt. Hitch 540 rpm PTO driven air row crop sprayer,
100 gallon fiberglass tank, 120 gpm centrifugal pump, accurate meter,
12v electric valves, model 3000 squirrel cage fan, model 3000
rotating row crop head 12 volt operation.
Standard equipment: combination fan housing for orchard/row crop heads.
Options available: row crop head, orchard head, nut tree heads,
VMC tower heads, 150 gallon tank, hydraulic rotation, sight gauge in tank,
stack extension.
3004 with Row Crop Head
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
69
REARS
nifty series
For growers, gardeners and groundskeeping professionals.
Available as skid or trailer models with 25, 50
or 100 gallon tank size. All tanks are stainless
steel with mechanical agitation. Trailers are
offered with boat trailer tires or turf style. All
models have Honda engines and diaphragm
pumps for long life and low maintenance.
REARS NIFTY SPRAYERS
100 gallon Nifty skid, AR30 pump, Honda 5.5 HP engine.
50 gallon Nifty skid, AR30 pump, Honda 5.5 HP engine
25 gallon Nifty with boat trailer tires
Rears Pul Tanks
50 gallon, AR30 pump,
5.5 HP Honda engine
with turf flotation tires.
50 gallon Nifty trailer with flotation tires and Rears Nifty Boom
70
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
skids
REARS
Commercial Skid Sprayers - Available with 50-1000 gallon stainless steel, single or
multiple tanks with mechanical agitation. Pumps and engine options available up
to 60GPM and 700PSI to meet your needs. Reels, hoses and guns are available to
fit each application.
Rears multiple tank skid sprayer
500/200/200 gallon
John Deere diesel engine
High pressure diaphragm pump
Rears 300 gallon skid
Honda engine
Medium pressure diaphragm pump
Rears multiple tank skid sprayer
Multiple engine and John Bean piston pumps
Rears 100 gallon 304SS low profile skid
Honda engine
Diaphragm pump
REARS SKID SPRAYERS
Rears 300 gallon skid
Honda engine
High pressure diaphragm pump
Rears 600 gallon high pressure skid sprayer
Custom paint colors available
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
71
SIMPLE, FAST HOOKUP WITH YOUR PICKUP!
REDUCE SAND & SALT with OUR LIQUID DE-ICER
UNIT
The Low Profile Skid De-Icer Unit!
Main Features:
• Low profile, black powder coated frame;
anchors at each corner
• Compact design for installation in a
pick-up truck
• Two-inch Banjo poly centrifugal pump
• Honda 5.5 HP gas engine
MSS DC205G-H • 205 gallons
MSS DC305G-H • 305 gallons
Options:
• SET BOOM-NO-VALV - 7 Nozzle Boom with 2 receiver mount
• SET 25-SALT-PILE - Kit with 25' hose to wet granular salt pile
• SET 25-REFILL-HS - Kit with 25' of 2" suction hose with
2" cam couplers
• CARGO Series sprayers for utility
vehicle or compact trucks
• Polyethylene tank, 5" lid
• Agitation by Venturi nozzle
• Tank drain
• 12 VDC Flojet diaphragm pump
#4300-143, 4.5 gpm, 45 psi
MS DE-ICER/HYDRO SEEDERS
CARGO-50
SPRAYER
Shown with
optional boom
• Remote switch
• Manual control, one valve for boom
section, glycerine pressure gauge
• 25' hose and gun with adjustable
cone nozzle
MSS CARGO-50 - with 50 gallon tank
MSS CARGO-100 - with 100 gallon tank
MSS CARGO-200 - with 200 gallon tank
MSS R12M-CARGO - 12' vertical fold boom
Herb-Matic IIC
Hydro-seeding Units
Herb-Matic is designed for a minimum use of pesticide
in a one pass system. Spot treat as you apply fertilizers.
• Tank: 500 gallon*
• 3" cast iron centifugal pump:
300 gpm, direct drive
• Honda gas engine:
11 HP, with manual start
• Hose reel: manual, 1"
• 150' long hose:
1" diameter
• 2 quick-coupler
fan nozzles and tool box
• Mulch bale chute
*Other tank sizes available
MSS HS500
MS Watering Sprayers
200 - 500 gallon tanks, 2" Banjo centrifugal pump, 5.5 HP Honda
engine, reels and discharge hoses available - Contact us for details
This system injects pesticide in a coaxial hose. The double trigger
allows options to the operator for lawns: Apply fertilizer and full
pesticide coverage simultaneously or apply fertilizer and pesticide on
demand. System is adaptable to your sprayer. Cabinet has a seven
gallon polyethylene tank for pesticide concentrate and a 12 volt
injection system, double feed reel, 300 feet of coaxial hose, and a
double trigger gun.
MSS Herb-MaticIIC
72
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
MS Skid Sprayers
Polyethylene and fiberglass spray tanks are available
mounted in steel frames and feature agitation by
venturi nozzles in the tank.
Comet diaphragm pumps offer positive
displacement pressure and volume options
up to 580 psi and 20 gpm.
Our Most Popular
Skid Sprayer!
Many sizes of tanks and styles are available. Herb-Matic pesticide
injection systems are optional. Sprayer tank and pump/reel modules
available in sizes and installations to suit the job. Compact sized.
MS C765 200
Commercial
Compact Skid
Compact transverse
mounted, space
saving design
MS Commercial skid models
12 volt version for closed van
From MS and OESCO
MS SKID/TREE SPRAYERS
Tree Sprayer Package
500 gallon elliptical tank, sparge tube agitation, high pressure Comet
plunger pump, Honda electric start engine, Hannay 6000 Series electric
rewind reel, 3/4" high pressure spray hose with gun and swivel.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
73
Legendary John Bean Skid Sprayers
Positive displacement piston pumps available
from 5-60GPM up to 800PSI. Stainless steel,
fiberglass or poly tanks in single or multiple
versions. All steel skid frames and mechanical
agitation. Contact us for specifications.
We have a
huge inventory
of parts for older
and newer
John Bean
sprayers
John Bean multiple tank skid sprayer
600/200/200 gallon
John Bean 500 gallon 20 GPM pump
John Bean 100 gallon tank, 10 GPM pump
JOHN BEAN SPRAYERS/FEEDING NEEDLES
John Bean 300 gallon tank,
20 GPM pump
RECOMMENDED PUMP CAPACITY, PRESSURE AND TIPS FOR SHADE TREE SPRAYING
HOSE
GUN & DISC
SIZE
3/4" 785 equipped with special kit
NOZZLE
TREE
PSI
HEIGHT
450 - 550 65' to 110'
PUMP GPM
PUMP PSI
60
50
35
600-800# with
100' of 3/4" hose
600# with
100' of hose
3/4"
785 equipped with special kit
and #16 disc
450 - 550
50' to 70'
35
25
600-700#
with 200' of hose
3/4"
785 & #14
450 - 550
40' to 65'
20
400-500#
with 100' of hose
5/8"
785 & #14
250 - 350
35' to 50'
10
400#
with 100' of hose
1/2"
785 & #10
300 - 350
20' to 35'
5
400#
with 100' of hose
3/8"
757 & #7
250 - 300
10' to 25'
Manufactured by
and #22 disc
OUR OWN FEEDING NEEDLE
This high pressure, high volume needle is manufactured out of thick wall
steel pipe tapered and threaded together. Complete with adjustable step
plate (doubles as splash plate). A high pressure 3/4" squeeze handle
valve is mounted in the 3/4" pipe handle. A 3/4" FHT brass adapter is included ready to attach to
hose. The tip is an interchangeable: 2, 3, 4 or 6 hole. Please specify which tip when ordering.
Length 40". All parts available.
ORC FN-12
ORC FN-13
ORC FN-14
ORC FN-16
(2 hole tip) • 10 lbs.
GPM at 200 PSI
13
(3 hole tip) • 10 lbs.
20
(4 hole tip) • 10 lbs.
27
(6 hole tip) • 10 lbs.
40
Replacement tips:
2 hole • .25 lb.
ORC FNT-2
ORC FNT-3
ORC FNT-4
ORC FNT-6
3 hole • .25 lb.
4 hole • .25 lb.
6 hole • .25 lb.
Replacement valve: KIN 305A5-1 - 3/4" squeeze valve
Valve repair kit: KIN 305AFF-5-KIT
Digital Flowmeter available
See page 83
74
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
REARS
P a k Ta n k
... the most popular 3 pt. hitch we sell!
25 to 200 gallon size • Standard or heavy duty frames • 3 pt. hitch or front mount
Pak Tank sprayers come standard with
stainless steel tanks, mechanical agitation,
pto shaft driven diaphragm pumps and
sway chains. Many models of booms, guns
and hose available. Excellent for small fruit,
Christmas trees and general row crop
spraying.
Front mount Pak Tank
50 gallon narrow Pak Tank
100 gallon Pak Tank
50 gallon Pak Tank
with 2 section boom
100 gallon Pak Tank with orchard weed boom
Orchard Weed Boom
REARS PAK-TANK SPRAYERS
200 gallon Pak Tank
Heavy duty frame
100 gallon Pak Tank with 3 section boom
The telescoping length of this boom adjusts to the needs of the operator.
Mounts right or left side of tractor on transmission belly side.
Three stock models available. Kit includes hose, spring hinge and manual valve.
Many options including 12v electric valve. 1, 2, 3 nozzle models
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
75
WE ARE SPRAYER EXPERTS!
We are one stop shopping: Call OESCO, Inc. for all your sprayer parts, accessories & calibration needs.
Call to speak with one of our specialists today! We are always happy to help you!
QJ360C Nozzle Body Series
• Available with either 3, 4 or 5 spray positions for easy change of spray tips or quick boom flushing
• Positive shutoff between each position
• Automatic spray alignment using flat fan spray tips
• Maximum operating pressure of 300 PSI (20 bar)
for Wet Booms
for Dry Booms
Available in 20 mm,
25 mm, 1/2", 3/4" or 1"
pipe connections
Available in 20 mm, 25 mm,
1/2", 3/4" or 1" single or double
hose shanks
Single Nozzle Bodies for Dry Booms
Single Nozzle Bodies for Wet Booms
for 3/8", 1/2" and 3/4" hose
for 1/2", 3/4" and 1" pipe mount
QJ100 Series
Quick TeeJet
Nozzle Body
QJ200 Series
Diaphragm Check
Valve Quick TeeJet
Nozzle Body
QJ300 Series
Diaphragm Check
Valve Quick TeeJet
Nozzle Body
Type QJ22187-NYB
Diaphragm Check
Valve Quick TeeJet
Nozzle Body (side
mount)
Type QJ17560A-NYB
Diaphragm Check
Valve Quick TeeJet
Nozzle Body
Type QJ7421-NYB
Quick TeeJet
Nozzle Body
BOOM COMPONENTS/CALIBRATORS
Quick TeeJet Caps and Adapters
Hose Shank
Nozzle Bodies
QuickJet Round Clamps
QuickJet Square Clamps
Brass, stainless steel,
Nylon and Celcon®/
stainless steel hose
shank nozzle bodies.
Features 11/16"-16
TeeJet threaded outlet.
NEW
Standard clamps for
dry booms available
for round or square
tubing
Single Hose
Connection
Brass
Double
Hose
Connection
Standard TeeJet
threaded caps
available in brass,
SS or nylon
Nylon
Call for your complete
TeeJet Catalog today!
76
Avoid over and under
application of
chemicals
For Operating Pressures
up to 125 PSI (9 bar)
Accurate flow rate
measurements in
seconds!
• Quickly find worn spray
nozzle tips - Industry
guidelines recommend tip
replacement once flow rate
exceeds that of a new tip
by 10%.
• Accurately measure true
tip flow rate - Today's high
tech sprayers can only
be properly calibrated and
confirmed with this
knowledge.
• Fast and simple
operation - Readings in
10 seconds or less per trip.
SPO 23890 - SC1 Calibrator
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Sprayers and Booms
Wet and dry booms manufactured from sturdy steel tubing and
powder painted. The tubular frame is made to give adequate
support to different accessories and add stability while in
operation or in storage. Choose a tank size, pumping unit,
manual or electric control and a manual or hydraulic folding
boom from a wide range of models.
MSS P50 - 3 pt hitch sprayer, Cat #1
with R12M 12' boom
MSS P950E - with 45' hydraulic boom
MSS R190 - with R15MV boom
MSS P150 - with 28' X-Fold boom
MSS P110 - with 22' manual boom
MSS P300-P - with 60' Monarch boom
MS BOOM SPRAYERS
MSS T1000
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
77
REARS
s p r ay b o o m s
Rears stainless steel tanks with mechanical agitation are mounted on steel frames using pto driven diaphragm
pumps. Stainless wet boom pipes provide the base for steel framed booms. Available with hydraulic or manual
boom fold and lift options. Tank sizes from 50 - 1000 gallons in 3 pt. hitch and trailer.
Coil shock boom on Pul Tank
REARS/ESS BOOM SPRAYERS
DP Boom mounted in utility vehicle with
304 Rears sprayer.
RMCO hydraulic fold boom
on heavy duty Pak Tank
DP Boom by Rears
3 section booms with steel tubing and stainless wet boom pipe.
Nozzles are diaphragm check with stainless tips. Call for details and specifications.
Trellis boom with
4 nozzle pipes on Nifty Pul Tank
Pak Tank HD RMCO Boom
Easily retrofits onto most brands of sprayers
ESS Air Assisted Electrostatic Spray Systems
PTO row crop spray procedures
feature low volume spraying
down to 5 GPA. These systems
provide air assisted electrostatic
spray directed to cover the target.
Special booms provide air and
electrostatic nozzle placement to
the crop.
Special note: Large row crop boom sprayers are NOT a stocked item
and time must be planned for manufacture and delivery.
78
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
REARS
Made in USA
50 gallon polyethylene
tank with a 4 HP Honda
engine and Comet MC25
diaphragm pump, hand
reel swivel mounted, 100'
of 3/8" hose and spray gun.
Mounted on a cart with 3
or 4 wheels. Trailer hitch
optional. Other hand booms
optional. Electric motor drive 50 gallon
option also available.
Mechanical
Agitation
for organic
spraying
NIFTY NURSERY CART SPRAYER
25 gallon wheelbarrow style Nifty Sprayer.
Specifications: 25 gallon stainless steel tank, mechanical
agitation, stainless lid, basket strainer, volume sight
gauge, suction strainer with valve, pressure gauge,
pneumatic bicycle tires and steel handles.
Pump: AR 252, 2 diaphragm 6 gpm, 290 psi
Motor: 3 HP Briggs & Stratton, 3 HP Honda or 1 HP, 110V
AC electric motor.
Accessories: 25' of 3/8" PVC hose, BR 380 brass spray gun.
Options: Trailer hitch
MS offers polyethylene tanks,
Comet diaphragm pumps and
Honda gasoline engines. Many
options include booms, hose,
reels and guns.
• 30 gallon tank
• 110V electric or Honda gas motor
• Narrow for your aisles, only 27"
overall width
• Perfect mix into the tank with
venturi agitation
• Hose rack or hose reel
• MC25 diaphragm pump,
6 gpm, 350 psi
• Easy to push with the big wheel kit
NIFTY 50 GALLON FOUR WHEEL HANd CART SPRAYER
30 gallon
Walk Behind Sprayer
The adjustable height nozzle will reduce the spray width for narrow
banding operations. Having a 6.6 gallon capacity self-agitating tank, the
S25 will do the job of several tank sprayers without the pain of carrying
them in hand or on your back. With the ground driven pump, and no
battery, the S25 operates at walking speed and pushes easily.
Designed for Commercial use, the S25 will perform under daily use by
contractors, as well as the occasional use of the homeowner with equal
results. When you need to apply a liquid in any season for any reason,
the S25 is there to help put an end to the work. Packaged to ship UPS.
EAR S-25 • 32 lbs.
MIGHTY MAC
Gasoline Powered Sprayer
For homeowners with larger spray needs. Wide sprays for
lawns, gardens, jet sprays for topping 25' trees.
Tow by hand or pull it with riding mower or tractor.
• 3 1/2 HP Briggs &
Stratton 4 cycle
engine
• Hypro twin piston
pump, delivers up
to 3 gpm at 300
psi
• Direct drive from
engine to pump
• Durable 22 gallon,
200 mil polyethylene tank
• Pistol grip gun
• 25' high pressure
3/8" hose
• 5 1/2" diameter top opening for easy fill
• Rugged, heavy steel frame
• Pressure relief valve and stainless steel in-line strainer
• 10.5 x 3.5 turf type pneumatic tires on ball bearing wheels
• 39"L (plus tow bar) x 29"W x 38"H
• Weighs 120 lbs.
GREENHOUSE/CART SPRAYERS
NEW
The S25 Spray-PRO
Mark III is a revolutionary
new product designed to
take the work out of
spraying your lawn,
sidewalk,
driveways,
paths, and gardens. Use
in spring, summer, fall,
and for winter ice control.
Wi t h a s p r a y w i d t h
o f 2 - 5 feet, and up to
a 11,600 sq.ft. coverage,
the S25 will make quick
work when spraying
herbicides, pesticides,
fungicides, fertilizer, or liquid ice control products.
• 50 gallon S.S.
Mechanical
tank with
Agitation
mechanical
for organic
spraying
agitation
• 5.5 HP Honda
recoil start
engine
• AR 30 - 9 GPM
500 PSI
diaphragm
pump
• Hannay
manual
rewind reel
• 200' of 1/2" hose
• Green Garde JD9 spray gun
MAC PS322T
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
79
MSS CARGO-50 12 Volt Skid Sprayer
• CARGO50 sprayer for utility vehicle
• 50 gallon US polyethylene tank, 5" lid
• Agitation by venturi nozzle
• Tank drain
• 12 VDC Flojet diaphragm pump #4300-504,
4.5 gpm, 45 psi
• Remote switch
• Manual control, one valve for boom section,
glycerine pressure gauge
• 25' hose and gun with adjustable cone nozzle
Optional Booms
MSS MS-R12M - 12' boom, vertical
MSS CARGO-100 - same as CARGO-50
MSS MS-R15MHE - 15' boom, horizontal
manual folding
with 100 gallon tank
manual folding
MSS CARGO-200 - same as CARGO-50
with 200 gallon tank
ATV Sprayers and Accessories
Spot Sprayers ... Great for treating small isolated areas.
For pesticides, herbicides or liquid deicing products
16 gallon sprayer
Order
Online
12 VOLT SPRAYERS/FOAM MARKERS
Tree Sprayer
16 Gallon
ATV Spot Sprayer
Roundup Ready!
16 gallon poly tank, 2.2 GPM
Northstar pump, 60 PSI.
15'x3/8" hose and wand with
adjustable spray pattern.
Tie down straps included.
GPM 26810 • 25 lbs.
• Tree sprayers operate at higher
pressures, allowing for higher spray
heights and an atomized mist for
delicate flowers
• Small isolated areas like individual
weeds are more difficult to treat
• Tree sprayers are available in ATV
models and tow behind models
26 gallon sprayer
26 Gallon
ATV Spot Sprayer
26 gallon poly tank.
Equipped as GPM 26810.
GPM 268120 • 27 lbs.
ATV Broadcast Kit (not pictured)
14' spray pattern with just 1 nozzle.
Mounts to ATV hitch.
GPM 268195 • 10 lbs.
Foam Markers
REARS
REARS PAK-MARK
For spreaders or sprayers up to 36"
wide. 32 oz. tank, power unit, tubing
and mounting components uses D cell
battery.
12V compressor foam marker
available in several models.
Normally used in turf, cranberries
and row crops. Adaptable for any
sprayer or spreader, requires 12V
power supply.
REA PM1-S - one sided
RIC TTR-1101
For spreaders or sprayers up to 8' wide.
60 oz. tank, single air pump, remote
switch, tubing 12V vehicle battery
powered.
REA PM2-S-RC - 2 sided
w/ remote control box
RIC TTR-3301
3 models of affordable compact turf
markers. Can be used with broadcast
sprayers, drop spreaders and sprayers
with booms up to 18' long. Use dish
soap or turf marking soap. TTR-1101 or
TTR-3301 can be mounted as a center
drop on spreaders.
80
16 Gallon ATV Tree Sprayer
16 gallon poly tank. 12V, 2 GPM, 200
PSI Pumptec pump. 35'x3/8" hose with
spray gun. Sprays up to 30'.
GPM 268180 • 30 lbs.
For spreaders or sprayers up to 18"
wide. Dual 60 oz. tanks, dual air pumps,
remote switch for each side, tubing
12V vehicle battery powered.
RIC TTR-4401
Richway Fomalot Turf
Special Foam Concentrate
RIC TFM01 - 1 gallon
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
The reel leader.
Hannay hose reels come
in many sizes and capacities.
Hannay Reels is the leading manufacturer of
high quality hose and cable reels for most every
conceivable application. This page describes
and gives specifications on our most popular hose reels.
If you don't find what you're looking for, give us a
call and we will help you meet your needs.
Series 6000
Series 1500
Series 1800
Inlet: Standard inlet is 90°
ball bearing swivel joint
with 1/2" female NPT
threads.
Outlet: Standard outlet is
3/4" male GHT threads.
Operating Pressures to 3000 psi
Hose capacity of reel
MODEL
Inlet: Standard
inlet is a 90° ball
bearing swivel
joint with 1" female
NPT threads.
Outlet: standard outlet is
3/4" female GHT threads.
Operating Pressures to 1000 psi.
Inlet: Standard inlet
is 90° ball bearing
swivel joint with
1" female NPT threads.
Outlet: Standard
outlet is 3/4" male GHT threads.
Operating Pressures to 1000 psi
Hose capacity of reel
1/4" I.D. 3/8" I.D. 1/2" I.D. 5/8" I.D.
5/8" O.D. 3/4" O.D. 7/8" O.D. 1" O.D.
MODEL
5/8" I.D.
1" O.D.
3/4" I.D.
1-9/32" O.D.
Hose capacity of reel
MODEL
1/2" I.D.
7/8" O.D.
3/4" I.D.
1" I.D.
1-9/32" O.D. 1-9/16" O.D.
1514-17-18
175 ft.
125 ft.
75 ft.
50 ft.
1816-17-18
75 ft.
50 ft.
6024-19-21
235 ft.
125 ft.
60 ft.
1520-17-18
350 ft.
275 ft.
175 ft.
125 ft.
1822-17-18
150 ft.
100 ft.
6032-19-21
350 ft.
200 ft.
100 ft.
1526-17-18
500 ft.
400 ft.
300 ft.
200 ft.
1826-17-18
200 ft.
125 ft.
6024-23-24
450 ft.
185 ft.
100 ft.
1530-17-18
—
500 ft.
375 ft.
275 ft.
1830-17-18
275 ft.
150 ft.
6030-19-21
—
250 ft.
150 ft.
1536-17-18
—
—
475 ft.
350 ft.
1836-17-18
350 ft.
200 ft.
6038-19-21
—
350 ft.
200 ft.
HAN 9927.8551 - Replacement swivel 1/2"
HAN 9929.8551- Replacement swivel 1"
HAN 9929.8551- Replacement swivel 1"
Portable Garden Hose Reels ... for grounds maintenance and home use
HANNAY HOSE REELS
Series GH1100
Inlet: Standard inlet is 90° ball bearing
swivel joint and 1/2" female NPT threads
Outlet: Standard outlet is male GHT threads.
Operating Pressures to 3000 psi.
Hose Capacity: 3/8"(I.D)/300 ft.
1/2"(I.D.) /200 ft. 5/8"(I.D.) /150 ft.
HAN GH1100
HAN 9927.8551 - Replacement swivel 1/2"
Series GHAT1200
Inlet: Standard inlet is 90° ball bearing
swivel joint with 1" female NPT threads.
Outlet: Standard outlet is male GHT threads.
Operating Pressures to 1000 psi.
Hose Capacity: 1/2"(I.D.) /375 ft.
5/8"(I.D) /200 ft. 3/4"(I.D.) /150 ft.
1"(I.D.) /100 ft.
HAN GHAT-1200
HAN 9929.8551 - Replacement swivel 1"
FH-3 Roller and Spool Assembly
Speeds handling and reduces hose
wear. Buffed stainless steel rollers
resist corrosion, pitting and abrasion.
Polished, chrome-plated spools and
blocks add lasting beauty to your
equipment. Delrin bearing surfaces
assure quiet operation and minimum
wear.
Utility Hose Rollers
Stainless steel rollers and cast alloy brackets for
use on the reel, on cabinet door openings, truck
platforms and similar locations where sharp
edges may cut or damage hose/cable.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
81
Polmac Control Units
These units have been designed
and manufactured with special
materials suitable for any application in the
field of crop spraying and protection. The
nylon and stainless steel components are
highly practical, corrosion-proof and resist
the corrosive action of sprayed chemicals
and liquid fertilizers. Contact us for sizing to
your sprayer.
Pony Flow
Plus 12 V
220
GPS Guidance System
Cab mount
displays for
flow meters.
Many options available.
Features flow rates and
totals, ground speed,
pressure, and/or control of
12V DC motor drive valve.
Call for application and part
numbers.
COMPACT GUIDANCE FOR ANY APPLICATION
Pro-Flow
4 Valve
controller
with unloading
relief valve and
gauge
NEW
POL 00280004
Pro-Flow 1
POLMAC/TEEJET CONTROLS
4 Valve controller with
unloading relief valve, bypass
metering valve and gauge
NEW
• Versatile GPS guidance in a compact,
portable package
• Traditional lightbar guidance and a graphic
display provide guidance information
• High-quality internal GPS engine with
external antenna
• Straight-line (parallel) and curved AB
guidance modes
• Durable, sealed rubber keypad is easy to
see and provides good tactile feedback for
the operator
• Provides radar-like speed for use with other
control systems that require a speed signal
This is a 1 1/2" or 2" (9 to 90 gpm),
250 psi maximum, programmable
stop flow meter.
The operator
programs the
set amount,
manually opens
the valve, and
when the
desired amount
is reached the
valve automatically
closes. Comes as
compact (1) or
remote (2). Great for
filling spray tanks.
MWT 90-02399
(A) Signal (B) Signal
Part #
1 1/2"
12 Vcc.
0 Vcc.
POL 00379007
2"
12 Vcc.
0 Vcc.
POL 003790G2
Pro-Flow 2
(A) Signal
(B) Signal
1 1/2"
12 Vcc.
0 Vcc.
POL 00379010
2"
12 Vcc.
0 Vcc.
POL 003790G3
Part #
(A) - Output signal with throttle valve open
(B) - Output signal with throttle valve closed
POL 00304304
Nozzles for Washing
Containers
Pony Flow 9V Sensor/Counter
For use with Polmac flow meters. Can be mounted
directly to body of the flow meter or remotely
mounted. Functions include Start, Stop, Auto On,
Auto Off, Running Total and Final Total. Measures in
US gallons, Imperial gallons or liters. Up to
99,999,999 units.
Model
Order #
Used to clean chemical products
out of emptied containers before
they are disposed. Consists
of a central shaft on which rotates a
fluid activated nozzle that is able to
rotate through 360° to spray the
inner surfaces of the container.
POL 63408499 - Rotating
Extractable (1)
POL 6340849S - Slim Rotating
Extractable (2)
POL CH370001
Pony Flow 4C
POL CH37000C
STANDARD >3/4"
30306032.DEU
Pony Flow
4 Remote
POL CHRE0001
RAPID CHECK
41308899.DEU
Used to clean chemical products out of tanks and
mixers. Its fluid activated rotating head covers
360° and performs a complete wash. It delivers
7.4 gallons per minute at 70 PSI.
POL 63408399
POL 6340839R
ST. 1/2"-3/4" INOX - 1/2' NYLON
30306032.CDE
POL 63408399
82
(2)
Nozzles for Washing Tanks
Flow Meter
Sensor
Pony Flow 4
(1)
The TeeJet 844-AB
Designed exclusively for orchard spraying and
available with a conventional wiring system or
junction box to customize features.
POL 6340839R
• Convenient operation. Individual boom
control switches allow the operator to
accurately manage spray application by
changing spray patterns according to tree
height.
• Greater accuracy. When a boom section
is shut off, the system can automatically
maintain system pressure. This prevents
over-application when spraying sections of
smaller trees.
• Improves efficiency. Individual boom controls
allow you to shut off boom sections from the
tractor seat. Time will no longer be wasted
getting on and off the tractor to shut off
valves.
• On-the-go swath width adjustment allows
operator to go from one orchard to another
without reprogramming.
• Automatic control is fast and stable.
• Built-in planning tool helps match application
rate, tip capacity and pressure.
• Large backlit display shows all spraying
information at a glance.
• Control up to four boom sections plus master
shutoff.
• Flow or pressure-based regulation options
provide reliability and flexibility.
• Single cable connection for quick hookup.
MWT 90-50018 - Core kit, 844-AB-4
(console w/ mounting brackets, cables and
manual). Speed, flow and pressure sensors
sold separately.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
®
®
SRS-600 PROPACK™
The electric SRS600 offers convenience, versatility,
and comfort in a back pack sprayer. Propack
eliminates the need for the operator to continually
“Pump Up" the sprayer to maintain a steady spray
pattern as with manual sprayers, making spraying
faster and easier. It works well with many materials
including herbicides, insecticides and anti-icing liquids.
GREEN GARDE® FLOW MASTER®
Digital Flow meter, no moving parts,
measures rate and volume to 100th of
gallons, pressures 5-500 psi, accuracy
+/- 2% 9 V battery
GRE 38950 - .03-3 GPM rate
3/8" FPT
GRE 38951 - 1.0-10 GPM rate
3/4" FPT
12 Volt
Electric
Sprayer
Shurflo Pumps
ELECTRONIC
DIGITAL METERS
Aluminum turbine
meter with LCD
readout for
gallons with 1"
NPT threads.
0.3-3 GPM. Field replaceable batteries.
Factory and field calibration. 300 PSI max.
GPI 113900-9500 • 2 lbs.
HYP 8000-541-236 Lawn and garden pump
12v, 1.0 GPM, 60 psi demand switch, 3/8"
NPTF ports
HYP 8000-543-236 Standard pump 12v, 1.8
GPM, 60 psi demand switch, 3/8" NPTF ports
HYP 2088-313-145 Standard pump 12v DC,
3.6 GPM, open flow (2.6 [email protected] psi) 45 psi
demand switch, 1/2" MSPT ports.
Aluminum turbine meter with LCD readout for
gallons with 1" NPT threads. 3-50 GPM. Field
replaceable batteries. Factory and field calibration. 300 PSI max.
HYP 2088-394-144 Standard pump with 6'
power cord, 115 V AC, 7 amps, 3.0 GPM, 45
psi demand switch, 1/2" MSPT ports.
GPI 113900-9501 • 2 lbs.
HYP 4211-035 Power twin, 12 v, DC, 8.7
Amps, 6.25 GPM open flow (3.5 [email protected] psi)
demand switch, 1/2" MPT ports.
Nylon turbine meter for 0.3-3 GPM. LCD
readout. Field replaceable batteries. Factory
and field calibration. 1" NPT. 150 PSI max.
GPI 113900-9510 • 1 lb.
Nylon turbine meter for 3-50 GPM. LCD
readout. Field replaceable batteries. Factory
and field calibration. 1" NPT, 150 PSI max.
GPI 113900-9511 • 1 lb.
HYP 8000-543-220 Standard bypass pump
1.5 GPM open flow, 60 psi internal bypass 3/8"
NPTF ports.
HYP 8030-813-239 High pressure pump,
1.6 GPM open flow, (.83 GPM @ 150 psi)
demand switch, 3/8" NPTF ports.
GPI G2S10N09GMA • 7 lbs.
Straight Swivel
Pump Fittings
HYP SRS-600 - 12 volt sprayer • 15 lbs.
12 Volt
Electric
Sprayer
NeverPump® Bak-Pak®
Sprayer
Sprays for 10 hours on a
Single Battery Charge!
HYP 234-2916 - 1/2 FPTx3/8 Barb
HYP 234-2926 - 1/2 FPTx1/2 Barb
HYP 234-2936 - 1/2 FPTx5/8 Barb
HYP 234-2946 - 1/2 FPTx3/4 Barb
CALC-AN-ACRE® II
SPEED AND ACREAGE MONITOR
Digital speedometer and acreage counter.
12V operation from the vehicle battery,
magnetic wheel or drive shaft pickup.
Holds two acreage counts in memory.
Measures speed, area and distance.
This device includes a console, speed
sensor and installation hardware and
instructions.
MIC 01000 - Calc-an-acre II
90° Swivel
Pump Fittings
HYP 234-3916 - 1/2 FPTx3/8 Barb
HYP 234-3926 - 1/2 FPTx1/2 Barb
HYP 234-3936 - 1/2 FPTx5/8 Barb
HYP 234-3946 - 1/2 FPTx3/4 Barb
FLOW METERS/12V SPRAYERS
Stainless steel turbine meter for 3-50 GPM.
LCD readout. Field replaceable batteries.
Factory and field calibration. 1" NPT,
800 PSI max.
Features:
• Sprays up to
120 gallons on
a single charge
• High performance
chemical resistant
SHURflo pump
• Variable speed
and adjustable
nozzle for light or
heavy duty spraying
• Ultra comfortable ergonomic
design, full back pad, and thickly
padded shoulder harness
• Adjustable spray tip provides a uniform cone
pattern
• Heavy duty hand lever can be locked in the open
position reducing operator fatigue
• 24" spray lance provides easy reach for accurate
spraying
• 4 gallon polyethylene tank
Professional
Grade Features:
• Braided power
sprayer-style hose
• Large poly
shut-off valve comfortable, thumb operated
• Extra long 20" poly spray wand
• Bonus nozzle system includes 4 different nozzles
• Lead acid battery sprays for 10 continuous hours on
a single charge
• Includes AC charger that completely charges battery
in 9 hours
• Extra large fill opening prevents spills when adding
chemical
• 4 gallon tank
• 1 Year warranty
GRE 13854 • 15 lbs.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
83
SUPREMA™ STAINLESS STEEL
BAK-PAK® SPRAYER
GAS POWERED SPRAYER
Large Bak-Pak® Style for Bigger Jobs
5 gallon gas powered backpack sprayer
with centrifugal pump. Sprays a mist
or combination stream to 20'
with optional gun. All seals
and O rings are Viton™,
21.2 cc 2 cycle engine,
5 gallon formula tank with
145 psi maximum pressure.
• Braided power sprayer-style hose
• Locking metal Roto-valve™ shut-off,
rotates 360° for ergonomic comfort
• Strong brass 18" spray wand
• Brass cone nozzle adjustable from
mist to long range spray
• Filler filter keeps out debris
• Left or right hand pumping
• Includes padded straps
• All metal pump
• 1 Year warranty
• 4 Gallon
ECH SHR-210
21cc/5 gallon sprayer • 17.1 lbs.
GRE 67367
Over 50 years of
motorized backpack
sprayers
X-PERT®
HAND
SPRAYER
TRU P-50-Y • 1.6 lbs.
SOL 450 • 23 lbs.
Viton equipped, 2.6 quart poly pump,
poly tank.
Engine: Solo 2 cycle
Horse Power: 3.3HP
Capacity: 3 gallons
Range: 38'
GRE 99142 - 2.6 quart • 1.6 lbs.
Accessories for
SOLO 450
TROMBONE SPRAYERS FOR
SPRAY OR FIRE PROTECTION
BACKPACK SPRAYERS/ CF VALVES
Dusting
attachment
SOL 4900550
Shoots up to 25'. Nickel plated brass barrel
GRE 61224 - adjustable gun and grip • 2.6 lbs.
ULV Nozzle
Requires liquid
booster pump
SOL 4900479
CFValve™
Liquid Booster Pump
For vertical spraying or ULV attachment
SOL 4400235
Constant Flow Valve
Spray the precise amount of chemical with the addition of a
CFValve™ to the delivery system of a backpack, hand held,
compression, 12V or field sprayer. Both the flow and pressure
are controlled and, additionally, the flow is shut off when the
pressure drops below the pre-set feature of the valve. The
valve must be ordered by thread size and pressure range.
Weight= .1 lb. each.
Double Nozzle
SOL 4900137
See chart below for thread and pressure range.
Stainless Steel Sprayer
An attractive alternative for a
variety of spraying tasks. Perfect
for pesticides, herbicides, and
many harsh chemicals.
• Corrosion resistant stainless
steel tank
• Extra large T-style handle
allows two-handed pumping
• 28" Durable brass wand and
brass adjustable nozzle
• 48" Reinforced nylon hose
provides extended reach
• Multiple nozzles included: flat fan,
jet stream, hollow cone, and brass
adjustable nozzle
SOL 465 Stainless Steel Sprayer
84
Polypropylene design.
Working pressure - 60 psi
Tank capacity - 48 oz.
Use YELLOW & RED valves in backpack and compression sprayers.
Use GREEN & BLUE valves in 12V/ on-demand systems, boom sprayers or engine driven pumps
Back Pack
Sprayer Model
YELLOW
14.5 PSI
RED
21 PSI
BLUE
29 PSI
GREEN
43.5 PSI
Solo, Lesco,
any 3/8 BSP thread
SOL Y 3/8 BSP
SOL R 3/8 BSP
SOL B 3/8 BSP
SOL G 3/8 BSP
GRE 98661V
GRE 98662V
GRE 98663
GRE 98664
Field King, Hardi,
Maruyama
SOL Y 18 mm
SOL R 18 mm
SOL B 18 mm
SOL G 18 mm
Chapin, Birchmeier,
B&G
GRE 98665
GRE 98666
GRE 98667
GRE 98668
Hudson, Jacto, SP,
any Spraying Systems
component thread
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Knapsack Sprayers
Features:
• UV resistant, high density
polyethylene tanks, commercial
grade wands, nozzles, hoses, &
valves
• Chemical resistant Viton® seals.
• Pump on the go feature: pump
while on your back
• 4 nozzle assortment
• Left or right hand pump handle.
4 gallon piston pump
SOL 425
5 gallon piston pump
SOL 435
3 gallon diaphragm pump
SOL 473D
SOL 425 - 4 gallon piston pump,
90 PSI • 11 lbs.
SOL 425DLX - 4 gallon piston
pump deluxe package includes
folding handle, pressure gauge,
5 gallon diaphragm pump
relief valve in tank and brass
SOL 485
adjustable nozzle • 11 lbs.
SOL 435 - 5 gallon piston
pump • 14 lbs.
SOL 475 - 4 gallon diaphragm
pump, 60 PSI • 11 lbs.
SOL 475DLX - 4 gallon diaphragm
pump and same features
as 425DLX • 11 lbs.
SOL 485 - 5 gallon diaphragm
pump • 14 lbs.
SOL 473D - 3 gallon diaphragm
pump • 11 lbs.
SOL 473P - 3 gallon piston
pump • 11 lbs.
4 gallon diaphragm pump
SOL 475
piston
diaphragm
pump
3 gallon piston pump
SOL 473P
Compression Style Sprayers
• Easy fill funnel top
• High capacity pump for quick pressurization
• 48" hose and 28" wand • 4 nozzle assortment
• Pressure relief valve
• Large second opening for cleaning
SOL 430-2G
SOL 430-3G
1 gallon • 3 lbs.
2 gallon • 4 lbs.
3 gallon • 5 lbs.
OSATU Star 16 Green Knapsack Sprayer
NEW
Common parts and accessories
Description
Fits
Diaphragm Pump Repair Kit
475, 485, 473D
Piston Pump Repair Kit
425, 435, 473P
Brass Adjustable Nozzle Kit
All
Shut-off Valve
All
28" Universal Wand Assembly
All
Pressure Gauge
All
Pump Repair Kit
454, 456, 457
20" Brass Wand
All
Drift Guard
All
Plastic Adjustable Nozzle
All
60" Brass Wand
All
Pro-Spot Drift Guard
All
Drift Guard
SCC 11/16 thread
SP Systems SP507
Gravity Tank
SP Systems EcoScape
• Mechanical agitation helps to keep
wettable powders in suspension
• Internal tank reinforcement via ribbing
between the walls, making the unit
stronger and more deformation-resistant
• Has a handle for transport
• Reversible
4 gallon tank
with straps and
gravity outlet.
No pump.
Use for sucker
control in
tobacco or
other applications where low
pressure gravity flow is needed.
• Fold back tubular
handle for easy
storage Ergonomic design
• Piston - external
pump capable of
120 PSI
• 6" wide mouth lid
• 4 gallon blow
molded tank
with Viton Seal
• Shoulder straps with rubber pads
• Adjustable plastic nozzle
• Fiberglass wand
TRU Star-16-Green • 7 lbs.
SP SP507 • 7 lbs.
SP ECOSCAPE • 11 lbs.
The advanced design of this simple, highly
functional unit makes it very light. It has fewer
parts due to so many components being
built-in. This makes it highly durable and a
guaranteed product, and at the same time
ensures maximum economy.
NEW
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
BACKPACK SPRAYERS/SOLO/OSATU/SP
SOL 430-1G
Part #
SOL 0610406-K
SOL 0610407-K
SOL 0610410-P
SOL 4800170
SOL 4900170N
SOL 4900356
SOL 4900405-K
SOL 4900421
SOL 4900430
SOL 4900527
SOL 4900528
SOL 4900626
DBS 1085
NEW
85
SPRAY-HOOD APPLICATORS
Conservation Spray Hood design permits herbicide treatment of row middles and between
plastic mulch inside a spray hood. Available in kit form or toolbar sprayer design.
Hoods available individually or in kits to adapt to your tool bar:
conservation, lay by, broadcast and over row
Controls vegetative growth by applying super
heated water to non-selectively eradicate
unwanted plants. The machine heats water on
demand under low pressure. The very hot water
immediately destroys the cellular structure of the
plant. This method provides a non-chemical
method of vegetation control keeping in mind
concerns for human and environmental safety.
Specialty drift proof orchard and vine boom models available.
Contact us for details.
VARIOUS SPRAY HOOD STYLES AND MOUNTS
Lay by
Conservation
Over row
Broadcast
Hose-Fed and Electric Walk Sprayers
Electric Walk Sprayer
Hose-Fed Sprayer
• Durable, lightweight aluminum and
poly construction
• Patented airfoil technology
• Easy to use valve on handle with
quick connect camlock fitting
WE3
WEED CONTROL/SPRAY HOODS
WG6
WE6
WG3
ROG WG3 - 36" spray width, 3 spray nozzles,
flow indicator
ROG WG4 - 48" spray width, 4 spray nozzles,
flow indicator
ROG WG6 - 72" spray width, 6 spray nozzles,
flow indicator
• Lightweight
aluminum frame
with poly hood for
durability
• 12 volt pump with
tray for battery
ROG WE3 - 36" spray width, 3 spray nozzles,
flow indicator
ROG WE4 - 48" spray width, 4 spray nozzles,
flow indicator
ROG WE6 - 72" spray width, 6 spray nozzles,
flow indicator
Aquacide® skid mounted 5.5 HP Honda, 3
GPM pump, 50' application hose, 12" wide
four nozzle head and 6" wide two nozzle
head applicator. Water reservoir supplied
optional.
ECO355
Aquacide® skid mounted, 6.5 HP, 6GPM,
50' application hose, 12" wide, four nozzle
head applicator, 6" wide two nozzle head
applicator.
ECO655
WHY SPRAY BARE GROUND WHEN YOU CAN TARGET ONLY WEEDS?
Weed Seeker® Saves Up To 80% Of Chemical Cost. Precision Automated Spot Spraying Day Or Night
Technology provides the ability of a sensor to distinguish a plant from
everything else by analyzing the specific light spectrum of green
plants. The sensor “knows" when to spray by sensing a green plant.
The machine simply turns on a spray valve when a plant is
recognized and turns off the valve if no plant is present. This
technology can be adapted to many sprayers and booms.
Weed Seeker® detects chlorophyll in
plants. Comparing reflected light patterns,
Weed Seeker® detects the difference
between weeds, pavement or dirt. Weed
Seeker® then delivers the precise amount
of herbicide ONLY where it is needed on the weed.
86
WeedSeeker®
has two primary
markets,
agricultural
and industrial.
It can be used
day or night
because it
has its own
light source.
463 Weedseeker
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
The Volpi M3000 is an economical alternative to other
more expensive controlled droplet applicators. Designed
for the small grower or homeowner, the M3000 utilizes
a spray shield to protect your crop. Requires 2 "D"
batteries (not supplied).
NEW
This ultra low volume hand held sprayer for use with
RoundUp® or other herbicides with little or no water,
based on product labeling. With a 1 liter chemical
container this lightweight sprayer can go a long way on
a small amount of chemical. Only weighs 2 lbs. empty.
Hand Held CDA Sprayer
VOL M3000 - Hand held CDA sprayer • 2 lbs.
52" long
For orchards, Christmas trees, small fruits, vineyard,
greenhouses, vegetables and landscapers. Mankar
herbicide sprayers are shrouded, spinning disc
sprayers designed for controlled droplet application
(CDA) of herbicides in narrow bands. They give huge
savings in application volume, time and effort when
compared to hydraulic sprayers. They save time and
costs for the applicator. The control of the spray droplet
size and downward projection together with the hood
minimizes spray drift.
The original hand-held herbicide wipe-on
applicator is easier than hoeing and safer
than spraying; designed to apply systemic
herbicides only where you need them, on
the weeds. Sideswipe's™ patented design
delivers just enough chemical to do the job.
removable guard used when
underneath desired plants
Mini Mantra Plus
insert shows Mini Mantra Plus head detail
ndle oir ha
Whether you are a professional
grower or a weekend gardener
Sideswipe™ has a place
in your weed control
program.
The Sideswipe™ applicator has many unique
features that make it superior to competitive
applicators.
• Convenient, easy to use
• Puts the herbicide where you want it
• No drift - usable on a windy day
• No leaching
• Unique nylon nap pad wets evenly every time
• All parts are replaceable and available as parts
• Not for use with oil based products.
WEED CONTROL
Each complete Super Sponge® comes with:
• Heavy-duty, steel frame
• Corrosion-resistant plumbing
• Protective netting for the sponges
• Tank shut-off and stainless steel filter screen
• Translucent tank
• Sight glass manifolds that allow precise flow
metering
• Made by Smuckers manufacturing
reserv
There are many Super Sponge®
models and sizes to choose from!
Call for information
reversible clear plastic
elbow provides
180° rotation of pad for
new wiping area
1 qt.
1/2" polynap
CYLINDRICAL SPONGE APPLICATOR
NO DRIPPING OR DRIFT!
Design details:
Features:
• 1 quart of undiluted Roundup® will cover
approximately 1 1/4 acres
• Adjustable flow rate
• Powered by rechargeable battery
• Mini Mantra Plus head rotates 90° for
band width coverage
• 110 panel GP have adjustable spray hood
28" – 44" wide
• Spare parts available
• Rechargable battery and charger supplied
• Battery lasts 8 hours
MNK 100300
SUPER SPONGE® KITS
Super Sponge® is also available in kit form.
Each kit comes complete with plumbing,
sponges and tank. All you supply are the
wheels and frame! 5', 10' and 15' sizes.
• Reservoir handle - 1 qt. capacity, 52" handle
• Nose threaded fitting allows insertion of
shut-off valve
• Reversible clear plastic elbow indicates fluid
level & gives 180° rotation of pad for new wiping
area & longer pad life
• 1/2" polyester nap wiper pad with auto feeding
• Protective shield for wiping underneath desirable
plants
SID THS200 - 6" Sideswipe • 1.2 lbs.
SID TH204 - 6" replacement pad • .5 lbs.
SID THS100 - 9" Sideswipe • 1.4 lbs.
SID TH104 - 9" replacement pad • .5 lbs.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
87
We service most models of commercial and agricultural spray pumps.
FRAME MOUNTED CENTRIFUGAL PUMPS
Special models available. ALL parts available for
ACE pumps. Contact us for specifications on pumps.
ACE FMC-CW-150
Cast iron,1 1/2" suction x1 1/4" discharge, clockwise rotation
ACE FMC-CW-200
Cast iron, 2" suction x1-1/2" discharge, clockwise rotation
ACE FMC
Cast iron,1 1/4" suction x1" discharge, counter-clockwise rotation
ACE FMC-150
FMC/JOHN BEAN PISTON PUMPS
Cast iron,1 1/2" suction x1 1/4" discharge, counter-clockwise rotation
These pumps were made under the two
names of FMC and Bean. We service, sell
and stock parts for these pumps, old and
new models.
ACE FMC-200
Cast iron, 2" suction x1 1/2" discharge, counter-clockwise rotation
Call for other model number specifications
SALES - SERVICE - PARTS
for FMC/John Bean Pumps
PUMP
ADAPTERS
DIAPHRAGM & PLUNGER PUMPS
UDOR DIAPHRAGM & GAMMA SERIES
PLUNGER PUMPS AND ACCESSORIES
SALES, SERVICE
and PARTS
available for
Comet Pumps
SALES - SERVICE - PARTS available
Stock
Spline Round Keyway Wt.
Number
Bore
Bore
Size
Lbs.
GAG 114-1000 1 3/8x6
5/8
3/16
2.13
GAG 114-1200 1 3/8x6
3/4
3/16
2.07
1 3/8x6
7/8
2.00
2.00
GAG 114-1500 1 3/8x6
15/16
3/16 &
1/4
1/4
GAG 114-1600 1 3/8x6
1
1/4
GAG 114-1400
WP-1000 PORTABLE PUMP
PUMPS/COUPLERS
Solid Steel Push Pin Design
Good for tank
filling, maple sap,
garden or
small plot
irrigation.
®
®
Quick Couplers
(Female to Female)
2" Self-priming
Polypropylene
Transfer Pump
With 3 vane impeller,
powered by 5.5 HP PowerPro gas engine with low oil
sensor. .150 GPM - max.
HYP 1542P-55SP • 49 lbs.
• Echo 21.2 cc engine with Pro-Fire™
Electronic Ignition
• Cast iron volute
• Ideal for around-home use - draining pools,
pool covers, irrigating lawns and gardens
• Discharges up to 28 gal/min., 1680 gal/hr
• Unit complete with suction hose and strainer
ECH WP-1000 • 11.9 lbs.
HYP 1323-0072 - 13/8" PTO - 6 spline (I.D.),
15/16" Pump end (I.D.) forged steel, 540 RPM
HYP 1323-0073 - 13/8" PTO - 21 spline (I.D.),
15/16" Pump end (I.D.) forged steel,1000 RPM
HYP 1323-0074 - 13/8" PTO - 6 spline (I.D.), 5/8"
Pump end (I.D.) forged steel, 540 RPM
2" PUMP HOSE
COMBO KIT
Includes suction strainer,
Two 2" nipples, a 2" x 20' suction
hose and a 2" x 25' discharge
hose. Tough PVC hoses have male
and female standard pipe thread couplings.
GPM 108999 • 27 lbs.
HYP 1323-0075 - 13/8" PTO - 21 spline (I.D.),
5/8" Pump end (I.D.) forged steel, 1000 RPM
®
2" Self-priming
Aluminum
Transfer Pump
Myers-Aplex Piston Pumps
Built for field serviceability. Continuous splash lubrication.
Pressures up to 800 P.S.I and flows to 60 G.P.M.
Ceramic coated cylinders for durability.
SALES • SERVICE • PARTS
for old and new Myers pumps
1.94
Powered by a 4 HP Honda
GX120 gas engine with oil alert.
Mounted in a protective cage. .145 GPM - max.
HYP 1572-SPX
• 55 lbs.
OESCO, Inc. has parts for sprayers and pumps ...
plus used and recycled parts in stock for immediate delivery.
If you don't see it here, call us and we'll find it!
88
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
OESCO, Inc. is the
Northeast Distributor
for Hypro.
ROLLER PUMPS
MAX GPM
21.8
MAX PSI
300
MAX RPM
1200
SHAFT INPUT
5/8" solid shaft
5/8" solid shaft
MODEL
Call one of our pump
specialists for your parts &
service needs.
®
PUMPS
PISTON PUMPS
MODEL
HYP 5315C-X
HYP 5320C-X
HYP 5325C-X
HYP 5330C-X
HYP 5315C-HX
HYP 5320C-HX
HYP 5325C-HX
HYP 5330C-HX
HYP 5206C
HYP 5206C-H
HYP 5210C
HYP 5210C-H
HYP 6500C
HYP 6500N
21.8
300
1200
HYP 6500XL
21.8
300
1200
5/8" solid shaft
HYP 7560C
22.5
300
1200
15/16" solid shaft
HYP 7560N
22.5
300
1200
15/16" solid shaft
HYP 7560XL
22.5
300
1200
15/16" solid shaft
HYP 4001C
9.1
150
1800
5/8" solid shaft
HYP 4001N
9.1
150
1800
5/8" solid shaft
HYP 4001XL
9.1
150
1800
5/8" solid shaft
MAX GPM MAX PSI
1.5
500
2.2
500
2.5
500
3
500
1.5
500
2.2
500
2.5
500
3
500
8
400
8
400
10
400
10
500
MAX RPM
1800
1800
1800
1800
1800
1800
1800
1800
800
800
600
600
SHAFT INPUT
5/8" OD solid shaft
5/8" OD solid shaft
5/8" OD solid shaft
5/8" OD solid shaft
5/8" ID hollow shaft
5/8" ID hollow shaft
5/8" ID hollow shaft
5/8" ID hollow shaft
1" solid shaft w/base
1 3/8" hollow shaft w/base
1" solid shaft w/base
1-3/8" hollow shaft w/base
DIAPHRAGM PUMPS
MODEL
MAX GPM MAX PSI
6.1
290
HYP 9910-D252
MAX RPM
650
PORT SIZE
1-1/4" HB inlet, 1" HB outlet
SHAFT INPUT
3/4" solid keyed shaft
HYP 9910-D252GRGI
6.1
290
2800
3/4" HB inlet, 3/8" HB outlet
3/4" hollow shaft
HYP 9910-D252GRGI58
5.5
290
3600
3/4" HB inlet, 3/8" HB outlet
5/8" hollow shaft
MODEL
MAX GPM MAX PSI MAX RPM
9
580
550
HYP 9910-D30
PORT SIZE
1-1/4" HB inlet, 1" HB outlet
Same pump as 9910-D30 with 3/4" solid thru shaft
HYP 9910-D30APA
HYP 9910-D30GRGI
9
580
HYP 9910-D50
14
580
Assembled w/ gearbox 9910-KIT1640 and control
9910-GS40GI for mounting on 5HP gas engine
3600
550
1-1/4" HB inlet, 1/2" HB outlet
SHAFT INPUT
Select Kit
Select Kit
Select Kit
Select Kit
Same pump as 9910-D50 w/Buna-N diaphragms
Select Kit
HYP 9910-D50APA
Same pump as 9910-D50 w/solid thru shaft
Select Kit
MODEL
MAX GPM MAX PSI
19
290
HYP 9910-D70
MAX RPM
PORT SIZE
SHAFT INPUT
550
1-1/4" HB inlet, 1" HB outlet Select shaft kit for desired drive
HYP 9910-D115
30.1
290
550
1-1/2" HB inlet, 1" HB outlet Select shaft kit for desired drive
HYP 9910-D135
34.8
290
550
1-1/2" HB inlet, 1" HB outlet
1-3/8" — 6 splined male shaft
PORT SIZE
SHAFT INPUT
1-1/2" HB inlet,
3/4" NPT outlet
1-3/8" — 6 splined male
double-ended shaft
MODEL
HYP 9910-DBS140
MAX GPM MAX PSI MAX RPM
37.8
725
550
39.6
49.7
HYP 9910-DBS160
HYP 9910-DBS200
725
725
550
550
HYPRO PUMPS
HYP 9910-D50B
CENTRIFUGAL PUMPS
MODEL
MAX GPM
MAX PSI
MAX RPM
SHAFT OUTPUT
HYP 9202C
103
170
6000
5/8" solid shaft
HYP 9203C
140
170
6000
5/8" solid shaft
HYP 9202S
103
170
6000
5/8" stainless steel shaft
HYP 9203S
140
170
6000
5/8" stainless steel shaft
MODEL
MAX GPM
MAX PSI
MAX RPM
PTO OUTPUT
HYP 9402C-540
76
95
600
1-3/8" female, 6-spline shaft
HYP 9402C-540Q
76
95
600
1-3/8", 6-spline Quick Coupler
HYP 9403C-540Q
140
104
600
1-3/8", 6-spline Quick Coupler
HYP 9403C-1000
140
104
1000
1-3/8" female, 21-spline shaft
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
89
TeeJet® and OESCO ... Leaders in Spray Application Supplies
Here Are Some Of The Nozzles We Recommend For These Spraying Applications:
For: Soil incorporation, pre-emergence, fertilizer
(broadcast) use a coarse spray from Turbo
Floodjet® and TurboTeeJet® induction nozzles.
For: Systemic herbicides, fungicides,
insecticides use the same nozzles plus
the TurboTeeJet®, AIXR and AIC nozzles
For: Contact herbicides, fungicides,
insecticides use Turbo Teejet® or
XR Teejet®
Medium sized particles
• Tapered edge wide angle flat spray pattern for uniform
coverage in broadcast spraying
• Large, rounded internal passage to minimize clogging
• Excellent resistance to corrosive solutions
• Large droplets for less drift - 15-90PSI
• Automatic spray alignment with 25612-*-NYR Quick
TeeJet® cap and gasket
Extended Range Flat Spray Tips
• Excellent spray distribution over a wide range of
pressures - 15-60PSI (1-4 bar)
• Reduces drift at lower pressures, better
coverage at higher pressures
• 80° available in stainless steel and ceramic
Medium sized particles
• 110° available in stainless steel, ceramic and polymer
• XR TeeJet® tip molded into Quick TeeJet cap provides
automatic spray alignment
• Includes tightly fitting washer that stays put and assures
a good seal.
TEEJET NOZZLES
Coarse particles
• Excellent spray distribution for uniform coverage along
the boom
• Nozzle design incorporates a pre-orifice to produce
larger droplets for less drift
• Large, round orifice reduces clogging
• Stainless steel or polymer with VisiFlo® color-coding band
for easy size identification
• Can be used with CP25599-*-NY Quick TeeJet® cap for
automatic alignment
Disc-Core Type Full Cone Spray Tips
Typical Applications:
For spraying pesticides at higher pressures and flow rates. Especially suitable
for wettable powders and other abrasive
chemicals. Larger capacity nozzles are
also used in air blast sprayers.
Disc-Core Type Hollow Cone Spray Tips
Features:
• Produce smaller droplets for thorough
coverage with contact pesticides and foliar
applications.
• Maximum spray pressure to 300 PSI (20 bar).
Available in a variety of materials including ceramic for increased wear life.
4514-NY
Slotted Strainer
90
Core
Disc
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Call one of our specialists for your TeeJet® parts and calibration needs.
“Up until now, obtaining excellent drift resistance required a compromise. Tips that produce very coarse
droplets do minimize drift but don't provide the same surface coverage as tips that produce smaller
droplets. In some applications, inadequate coverage decreases the effectiveness of the applied
chemicals. These new AIXR tips provide a perfect balance of drift control and coverage - precisely-sized,
large, air-filled drops stay on target and cover the entire plant." - Spraying Systems
Air Induction XR Flat Spray Tips • very coarse particles
• Made of a two piece UHMWPE polymer
construction with VisiFlo® color-coding, UHMPE
provides excellent chemical resistance, including
acids, as well as exceptional wear life
• 110° wide, tapered flat spray angle with air
induction technology offers better drift management
• Compact size to prevent damage
• Depending on the chemical, produces large
air-filled drops through a venturi air aspirator
• Removable pre-orifice
• Available in seven tip capacities with a wide
operating pressure range: 15-90 PSI (1-6 bar)
• Automatic alignment when used with
25612-*-NYR Quick Teejet® cap and gasket
Air Induction Hollow Cone Spray Tip • coarse particles
• Ideal for drift control on airblast orchard sprayers
• Constructed of polypropylene, ceramic and Vitron® for
excellent chemical and wear resistance
• Larger droplets are produced, as compared to standard
TX ConeJet, through the use of a venturi air aspirator
resulting in reduced drift and improved canopy
penetration
• Removable pre-orifice for fast and easy cleaning
• Available in VisiFlo® ceramic (VK)
• AITX to be used with CP25607-*-NY Quick TeeJet cap
• Suggested spray pressure of 60-300 PSI (4-20 bar)
Flat Spray Tip • extremely coarse particles
• Removable pre-orifice
• Ideal for use with automatic sprayer controllers
• Wide operating pressure range:15-100 PSI 1-7 bar)
• Automatic alignment when used with 25598-*-NYR Quick TeeJet® cap and gasket
TEEJET NOZZLES
• 110° wide angle, air induction, tapered flat spray tip
pattern based on the patented outlet orifice design
of the original Turbo TeeJet® nozzle
• Patented orifice design provides large, round
passages to minimize plugging
• Depending on the chemical, produces large air-filled
drops through a venturi air aspirator resulting in less drift
• All polymer construction for excellent chemical and wear resistance
• Compact size to prevent tip damage
Air Induction Flat Spray Tips • very coarse particles
• Produces a 110° tapered edge flat spray pattern for uniform coverage in
broadcast spraying applications
• Available with a polymer insert with stainless steel (015-10 capabilities),
ceramic (025-05 capabilities) or polymer (02-05 capabilities) inserts
• Larger droplets for less drift
• Depending on the chemical, produces large air-filled drops through the
use of a venturi air aspirator
• AIC TeeJet® nozzle molded into Quick TeeJet® cap provides automatic
spray alignment
• Includes tightly fitting washer that stays put and assures a good seal
• Recommended pressure rating 30-115 PSI (2-8 bar)
Request a free copy
of the latest
TeeJet Catalog
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
91
®
Other GunJet Spray Guns:
All below have a twist handle for on/off and adjustment of
pattern. Two hand operation, replaceable disc for
volume control. Note: Specify disc when ordering gun
SPRAY GUNS
Brass Model AA43 Series Guns
A single hand operated spray gun
SSC AA43H-8 - 22" long, high pressure
SSC AA43L-8 - 22" long, low pressure
SSC AA2 - 24" long - Brass 3/4" FHT Inlet -
SSC AA43HA-8 - 13" long, high pressure
SSC AA43LA-8 - 13" long, low pressure
SSC AA12 - 20" long - Brass 3/4" FHT Inlet -
• Trigger control on/off
• Trigger pattern adjustment hollow cone to
straight stream as you pull the trigger back
• Available low (200PSI) or high (700PSI) pressure operation
• Interchangable discs for volume control (one disc supplied)
• 1/2 FPT inlet
• Brass or aluminum models - Special note: Brass available while supplies last
• Length of barrel available: AA43=22" long, AA43A=13" long
• Number 8 disc supplied with gun. Other discs available as optional equipment.
SSC 25660-4.0
CP 25670-4.0 NY
SSC 7029 - Adapter for GHT (1/2 MPT to FGT) Brass
SSC 11740B - Swivel connector with FHT. Free swiveling, leak proof
SSC 11990-18 or SSC 11990-19 - 1/2 MPT Swivel connectors
for 43 Series GunJet
SSC AA-46 - Trigger Valve, aluminum attaches to 3/4 FHT on
handle valves to convert to trigger valve (not pictured)
SSC 7029
Pressure measured at spray nozzle
®
SPRAY GUN - MODEL 22670
• 1 lb.
Optional Accessories for GunJet® Spray Guns
Tip Color
Gray
Black
Red
Nozzle Tip #
CP 25670-1.5 NY
CP 25670-3.0 NY
• 1.75 lbs.
SSC AA18-AL - 20" long - Aluminum 1/4" FPT Inlet -
GUNJET® LAWN SPRAY GUN
Model No.
SSC 25660-1.5
SSC 25660-3.0
• 3.5 lbs.
SSC 11740B
SSC 11990
NEW
SPRAY GUNS
1/4" NPT Threaded Connection
Model
Extension Length
SSC 22670-PP-15-1/4
15"
1/4" (F)
SSC 22670-PP-15-300
15"
1/4" Hose Shank
SSC 22670-PP-15-406
15"
3/8" Hose Shank
SSC 22670-PP-24-1/4
24"
1/4" (F)
SSC 22670-PP-24-300
24"
1/4" Hose Shank
SSC 22670-PP-24-406
24"
3/8" Hose Shank
Valves
4688 Trigger Valve with
trigger lock. Max flow rate 2
GPM, max pressure 250 PSI (10
bar). 1/4" NPT (F) inlet connection, 11/16"-16 (M) outlet connection. Brass material.
SSC 4688
• Maximum pressure rating is 150 PSI (10 bar)
• 22670 TriggerJet® spray gun comes w/ choice of 1/4" or 3/8" hose shank or 1/4" NPT
• Choice of 15" or 24" lengths
• 38720-PPB-X8 adjustable ConeJet® spray tip with Viton® O-ring.
• Accepts all standard TeeJet® spray tips and tip strainers
Handles
4727 Sure Grip Handle
Brass, rubber coated, 1/4" NPS (M)
or BSPT hose inlet connection.
SSC 4727
Brass Extensions
Straight and curved extensions 4673 and 6671 for pressure to 125 PSI (9 bar). 7715 - for pressure to 250 PSI (17 bar). Fits models 23L, 31
GunJet spray guns and trigger valves.
Straight
w/ Fixed
Body
Curved
w/Swivel
Body
Curved
w/Fixed
Body
Ext.
Length
Net
Weight
in oz.
6466 Trigger Valve Same
7715-8
4673-8
6671-8
8"
3
as 4688, less trigger lock, with
extra long trigger.
7715-18
4673-18
6671-18
18"
4
7715-24
4673-24
6671-24
24"
5
Brass, rubber coated, 3/4" garden
hose thread (F) inlet connection.
7715-30
4673-30
6671-30
30"
5 1/2
SSC 4754
7715-36
4673-36
6671-36
36"
6 1/4
7715-48
4673-48
6671-48
48"
7 1/2
SSC 6466
Tip - please specify
Cap CP1325
92
1/4" or 3/8"
Hose Connection
Inlet Connection
4754 Sure Grip Handle
6671-8
4727
4688
Example of assembled brass spray wand
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Largest John Bean
parts inventory in the
Northeast!
ALL parts available for John Bean
Sprayers, Accessories and Guns.
JOHN BEAN 785 SPRAY GUN
Excellent all purpose spray gun. Aluminum construction,
adjustable pattern, trigger control (with latch),
interchangeable discs for volume control. Assortment
of discs supplied with gun and optional large volume
kit available. 24" long, 3/4" FGH inlet, 48 GPM,
800 PSI capacity.
JBS 5253228 • 5 lbs.
JBS 5254037 High volume kit (over 25 gpm)
JOHN BEAN
757 SPRAY GUN
Nice aluminum constructed true pistol
spray gun for one hand operation. Pattern
adjustment, locking trigger, interchangeable
discs for volume control. Assortment of discs
supplied with gun. 11" long, 3/4" FGH inlet, 13 GPM,
600 PSI capacity.
JBS 1235000 • 1.5 lbs.
®
ADJUSTABLE PATTERN
SPRAY GUNS
GREEN GARDE®
SPRAY GUN
This rugged
stainless steel and
brass pistol gun is
barrel adjustable from fine
cone spray to straight
stream. Interchangeable
tips and nozzles gives
various patterns and
volumes. The body is
tapped 1/4 FPT with a plug
for installation of a gauge
for calibration purposes.
Large trigger has locking
clip. Length 7", 3'4" FHT
inlet.
E
C
A
K
J
I
H
Supplied with Large tip (3.86 oz.) and manual adjustable pattern
control, trigger is on/off
GRE 38501 • 2 lbs.
JD9-PT Spray Gun
Trigger on PT model controls on/off and variable spray pattern.
GRE 38507
• 2 lbs.
GRE 38507
Accessories to Fit the JD9-CT gun
A
B
C
D
E
F
GRE 38633
GRE 38634
GRE 38635
GRE 38636
GRE 38637
GRE 38638
Flooding Plastic
Flooding Plastic
Flooding Plastic
Flooding Baseball Head
Flooding Plastic
Flooding Plastic
Spray gun tips:
No.
Size
GRE 38606
GRE 38605
GRE 38604
GRE 38602
GRE 38603
Extra Small
Small
Medium
Large
Extra Large
4 GPM
2 GPM
5 GPM
2 GPM
1 GPM
1/2 GPM
Flow Rate
0.3 to 1 GPM
1.0 to 3 GPM
2.0 to 5 GPM
3.0 to 8 GPM w/gun
10 to19 GPM
OESCO
assembles
specialty guns
for use
by growers,
in greenhouses
or to spray
tobacco.
Call us for your
special high
or low pressure
spray gun needs.
Tip Adapters, Wands
GRE 38512
GRE 38990
GRE 38545
GRE 38546
Tip adapter for use with Spraying Systems Co. wands
Tip adapter for use with Hudson spray wands or with Calibrator™ valve
Hudson straight 18" brass spray wand with Delavan Raindrop Low Drift RF8 nozzle
Hudson curved 18" brass spray wand with Delavan Raindrop Low Drift RF8 nozzle
Hamilton Senior Brass Spray Gun
NEW
Heavy duty brass spray gun. 900 PSI maximum pressure. All orifice discs are
made from hardened steel. Inlet: 3/4" FGHT. Comes with #5 disc. 22" OAL.
HYPRO TURBO GUN
7" barrel, up to 10gpm flow, up to 700psi, one hand
operation, 1/2" MPT inlet trigger valve, pattern
adjustment and a sliding cone over the tip to inject
air for turbo mist.
HYP 3381-0013 • 1/4 lb.
HAM 1000-01
GRE 38919 - Heavy-duty feeder with 38917
2-hole tip complete - Gun sold separately.
GRE 38918 - 3-hole tip only
GRE 38901 - 4-hole tip only
GRE 38906 - 7" stainless steel needle
extension w/O-rings
HEAVY DUTY
ROOT FEEDER
Pressure feed from
2-10" deep. 7" &11"
extensions available
for probing. Rugged,
long-lasting design.
G
SPRAY GUNS
21" barrel, 30gpm flow, up to 1200psi, two handle.
Spray gun 1/2" MPT inlet, Trigger valve.
HYP 3381-0011 • 6 lbs.
F
JD9-CT Standard Spray Gun
G
H
I
J
K
HYPRO LONG DISTANCE GUN
D
B
GRE 38907 - 11" stainless steel needle
extension w/O-rings
GRE 38908 - 36" extension
CALL FOR OTHER FEEDER ACCESSORIES AND MODELS
GRE 38903 - 18" extension
GRE 38905 - Floppy foot plate
GRE 38904 - Extension connector w/O-rings
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
93
Pressure Relief/Regulating Valves
Model 6815
Valve #
PISTON TYPE
MODEL 6815
• Brass with stainless
steel springs
• Models with light spring
(50psi) for use with XR
TeeJet® and LP
TeeJet® tips and
other low pressure
systems
• Use HSS models for
longer lasting valve
Model 8460
Recommended
Pressure Range
SSC 6815-1/2-50
Up to 50 psi
SSC 6815-1/2-300
Up to 300 psi
SSC 6815-1/2-700
300 - 700 psi
SSC 6815-3/4-50
Up to 50 psi
SSC 6815-3/4-300
Up to 300 psi
SSC 6815-3/4-700
300 - 700 psi
SSC 6815-1/2-HSS-300
Up to 300 psi
SSC 6815-1/2-HSS-700
300 - 700 psi
SSC 6815-3/4-HSS-300
Up to 300 psi
SSC 6815-3/4-HSS-700
300 - 700 psi
DIAPHRAGM TYPE MODEL 8460
Nylon inlet body with aluminum
bonnet. Choice of 1/2" or 3/4"
NPT (M) inlet and (F) outlet
connections. Flow rates to
70 GPM for 3/4" size. Pressures
to 50 & 300 psi.
Model 23120
MODEL 23120
302 stainless steel spring and
EPDM O-ring. Excellent chemical
resistance. 1/4" port for pressure
gauge pipe plug included.
Polypropylene.
Valve #
SSC 8460-1/2-50
Inlet & Outlet
Pipe Connection Size
1/2" NPT
1/2" NPT
Net
Weight
1 1/4 lbs.
3/4" NPT
3/4" NPT
NPT
NPT
1/2"1/2"
NPT
NPT
3/4"3/4"
Inlet & Outlet
Pipe Connection Sizes
1/2" NPT
Rec. Pressure
Range
Net
Weight
Up to 50 psi
14 oz.
SSC 8460-3/4-50
3/4" NPT
Up to 50 psi
14 oz.
SSC 8460-1/2
1/2" NPT
Up to 300 psi
14 oz.
SSC 8460-3/4
3/4" NPT
Up to 300 psi
14 oz.
Valve #
* Inlet & Outlet
Pipe Connection Sizes
Pressure
Range
Net
Weight
SSC 23120-*-PP
1/2" or 3/4"
150 PSI (10 bar)
8 oz.
SSC 23120A-*-PP
1/2" or 3/4"
150 PSI (10 bar)
8 oz.
MODEL 23120A
Same as 23120 but with 316SS
spring and Viton O-ring
RELIEF/CONTROL VALVES
ALSO AVAILABLE SPECIAL ORDER - Models for high pressures up to 1200 psi
6B DIRECTOVALVE®
• Molded of corrosion-resistant
materials, all wetted parts are
polypropylene, stainless steel
and polyethylene
• Maximum pressure of
150 PSI
• Large capacity, 12 GPM
at 5 PSI pressure drop
• Molded-in mounting
flange and 1/4" NPT gauge port
• 3/4" inlet 1/2" boom connection
SSC AA6B
HAMILTON BYPASS AND RELIEF VALVES
Compact brass valve has spring
and stainless steel ball for valve.
Tee handle with locking nut to
set pressure. Available in 1/2"
and 3/4" MPT and spring range
0 - 300 PSI or 0 - 600 PSI.
Bypass connector 1/2 or 3/4" FPT.
AA17 TEEVALVE®
CONTROL VALVE
• Raise lever
to open, lower
to close valve
• Aluminum
construction with
corrosion resistant internal parts
• Lift off poppet valves for positive
ON-OFF action
• Cam type index tip assures
exact position of valve
• Dimensions: 4" wide x
4 1/2" high x 5" deep
(not including handle)
• Weight 2 3/4 lbs.
MODEL 17L
Connections:
• 1/4" NPT pressure gauge port
• Inlet: 3/4" NPT
• Boom outlets: 3/4" NPT (3)
• Accessory outlets 3/4" NPT (2)
SSC AA17L
HAM 2041-01 • 1/2" NPT, 0-600 PSI
HAM 2042-01 • 1/2" NPT, 0-300 PSI
HAM 2053-01 • 3/4" NPT, 0-300 PSI
HAM 2054-01 • 3/4" NPT, 0-600 PSI
• 1 lb.
• 1 lb.
• 1 lb.
• 1 lb.
MODEL 17Y
Connections:
• 1/4" NPT pressure gauge port
• Inlet: 1" NPT
• Boom outlets: 3/4" NPT (3)
• Accessory outlets: 3/4" NPT (2)
High Pressure and
High Flow Valves
JBS 1207620
50-800 psi, 40 GPM Capacity
3/4" Threads
Height: 9 1/2" • Weight: 8 lbs.
JBS 5284368
50-1000 psi, 75 GPM Capacity
1 1/4" Threads
Height: 9 1/2" • Weight: 7 lbs.
JBS 5284450
50-1200 psi, 75 GPM Capacity
1 1/4" Threads
Height: 12 1/8"
Weight: 10.5 lbs.
ALL PARTS AVAILABLE FOR JOHN BEAN VALVES
SSC AA17Y
94
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Plastic Valves & Fittings
PVC molded-in place ball
valves. Low cost, quarter-turn
operation. Maintenance free,
corrosion-free. Used with
water plumbing for industrial,
agricultural and residential
(NSF Approved) purposes. Can also be used in the
chemical supply line for waste water treatment as well
as chemical plants.
PART #
NPT SIZE
FLO 6Q-MTWE050
1/2" FNPT
FLO 6Q-MTWE075
3/4" FNPT
FLO 6Q-MTWE100
1" FNPT
FLO 6Q-MTWE125
1 1/4" FNPT
FLO 6Q-MTWE150
1 1/2" FNPT
FLO 6Q-MTWE200
2" FNPT
KINGSTON
QUICK OPEN SELF CLOSE VALVES
Normally closed, quick open, self closing valve, heavy brass
construction. Stem design has pressure equalization across
stem seat to allow for high pressure operation. Disc seat and
O-ring seals with stainless steel springs. Maximum pressure
400 PSI. Handles available with squeeze, pull, or lift levers
(also available without lever and bracket.) Excellent for agricultural
or industrial sprayers. 1/2", 3/4", 1", and 1 1/4" sizes.
Quick Open to 150 PSI - squeeze lever Above 150 PSI - squeeze lever
KIN 305B-4-1 1/2" • .5 lb.
KIN 305A-4-1 1/2" • 2 lbs.
KIN 305B-5-1 3/4" • .75 lb.
KIN 305A-5-1 3/4" • 2.5 lbs.
KIN 305B-FF-5-KIT - Kit for 3/4" high pressure valve
KIN 305A-FF-5-KIT - Kit for 3/4" low pressure valve
Call for information on other sizes and handle styles
PLASTIC BALL VALVES
SERIES 226
Barb x Barb
MODEL
END CONN.
SMC FN-226-4B4B-E
SMC FN-226-6B6B-B
SMC FN-226-8B8B-B
1/4" BARB
3/8" BARB
1/2" BARB
Pipe x Barb
SMC FN-226-4B4M-E 1/4" M.N.P.T.
SMC FN-226-4M6B-E 1/4" M.N.P.T.
SMC FN-226-8B4M-B 1/4" M.N.P.T.
END CONN.
1/4" BARB
3/8" BARB
1/2" BARB
Apollo Valves
High pressure,
600 PSI 1/4 turn
bronze valves,
stainless ball teflon
seats.
MAX
PRESSURE
125
125
125
1/4" BARB
3/8" BARB
1/2" BARB
125
125
125
High pressure, 600 PSI 1/4 turn
bronze valves, stainless steel
and stem teflon seats.
BRASS BALL VALVES
1/8" – 3/4"
SMC 075-FG-BT
SMC 075-HG-BT
END CONN.
1/8" F.N.P.T.
1/4" F.N.P.T.
3/8" F.N.P.T.
1/4" F.N.P.T.
1/4" F.N.P.T.
1/4" F.N.P.T.
1/4" M.N.P.T.
3/4" F.N.P.T.
3/4" F.G.H.T.
END CONN.
1/8" F.N.P.T.
1/4" F.N.P.T.
3/8" F.N.P.T.
1/4" M.N.P.T.
1/4" HOSE BARB
11/16"-16 MALE THRD.
11/16"-16 MALE THRD.
2 way Bronze Ball Valves
APO 71-144-01 - 3/4" FNPT
APO 71-145-01 - 1" FNPT
APO 71-146-01 - 1 1/4" FNPT
APO 71-147-01 - 1 1/2" FNPT
Economical Medium Pressure
400 PSI, 1/4 turn bronze valve, stainless steel ball, teflon seats.
APO 32-101-01 - 1/4" FNPT
APO 32-105-01 - 1" FNPT
APO 32-102-01 - 3/8" FNPT
APO 32-106-01 - 1 1/4" FNPT
APO 32-103-01 - 1/2" FNPT
APO 32-107-01 - 1 1/2" FNPT
APO 32-104-01 - 3/4" FNPT
APO 32-108-01 - 2" FNPT
3/4" M.G.H.T.
3/4" M.G.H.T.
AA144P DIRECTOVALVE®
BRAGLIA VALVES
2-WAY ELECTRICALLY CONTROLLED SOLENOID VALVE
• 10 GPM (37.9 l/m) flow with only 5 PSI (0.35 bar) pressure drop
• 2.5 amp current draw
• Polypropylene body for chemical resistance
• Fabric reinforced Viton® diaphragms
• No stroke adjustment required
• Corrosion resistant. 430SS solenoid grade armature
*To order, specify AA144Pand armature stop
then “1", “2", or “3" to
• Encapsulated coil and magnetic circuit
NEW
Model #
SSC AA144P-*
Inlet Size
3/4"
Outlet Size
1/2"
ELECTRIC AND MANUAL VALVES
PART #
SMC 012-2F2M-BT
SMC 025-4F4F-BT
SMC 036-6F6F-BT
SMC 025-4F4M-BT
SMC 025-4F4B-BT
SMC 025-4FMN-BT
SMC 025-4MMN-BT
3 way Valves
APO 70-603-01 - 1/2" FNPT
APO 70-604-01 - 3/4" FNPT
APO 70-605-01 - 1" FNPT
APO 70-606-01 - 1 1/4" FNPT
APO 70-607-01 - 1 1/2" FNPT
APO 70-608-01 - 2" FNPT
indicate number of units.
Example: AA144P-3
TEEJET 344BEC ELECTRIC 12V VALVE
High pressure, 12 volt, ball valves and pressure regulators.
Low cost, low maintenance and compact design makes
them perfect for new and old sprayer retrofits.
REA 180.1910.9 - 12V ball valve
REA 180.1910.10 - 12V pressure regulator
• 25 RPM, .6 second shut-off fully open to close
• Available in 2-way or 3-way versions
• Stainless stem with optional polypropylene or stainless steel ball
• Maximum pressure 300 PSI
• Flow rate 24-32 GPM depends on style of valve
• Wetted parts are nylon, Teflon®, polypropylene, stainless steel
and Vitron®
• Available in 3/4" or 1" connections
SSC 344BEC
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
95
Part #
Description
POLYPROPYLENE PIPE FITTINGS
Poly Nipples
POLYPROPYLENE
BALL VALVES
4 bolt construction (6 bolt for
large valves) with viton O rings
and teflon seats. 100 PSI max
pressure.
4 Bolt Valves
Part #
Description
Max
PSI
Pipe
Size
Thru
Ball
BJO V050
BJO V075
BJO V100
BJO V100FP
BJO V125
BJO V125FP
BJO V150
BJO V200
Full Port
Full Port
Standard Port
Full Port
Standard Port
Full Port
Full Port
Standard Port
150
150
150
150
150
150
150
150
1/2"
3/4"
1"
1"
1 1/4"
1 1/4"
1 1/2"
2"
3/4"
3/4"
3/4"
1"
1"
1 1/2"
1 1/2"
1 1/2"
6 Bolt Valves
Part #
Description
BJO V200FP
BJO V300
BJO V300FP
Max
PSI
Pipe
Size
Full Port
150
Standard Port 100
Full Port
100
2"
3"
3"
Thru
Ball
2 1/16"
2 1/2"
3"
SINGLE UNION POLYPROPYLENE
BALL VALVES
• Precision molded in glass reinforced
polypropylene, for strength and chemical
resistance
• Maximum operating pressure
100 psi at 70° F.
BANJO VALVES/FITTINGS/BULKHEADS
Part #
Description
BJO UV075FP
BJO UV100FP
BJO UV125FP
BJO UV150FP
3/4" Single Union Poly Valve
1" Single Union Poly Valve
1 1/4" Single Union Poly Valve
1 1/2" Single Union Poly Valve
BANJO STUBBY VALVES
Many other Banjo valves available - Call for details
Part#
HYP WBH12
HYP WBH34
HYP WBH100
HYP WBH114
HYP WBH112
HYP WBH200
HYP WBH300
HYP WBH400
96
Size
1/2" NPT
3/4" NPT
1" NPT
1 1/4" NPT
1 1/2" NPT
2" NPT
3" NPT
4" NPT
1 1/4" MPT x 3/4" FPT Red. Bush.
1 1/4" MPT x 1" FPT Red. Bush.
1 1/2" MPT x 3/4" FPT Red. Bush.
2" MPT x 3/4" FPT Red. Bush.
2" MPT x 1" FPT Red. Bush.
2" MPT x 1 1/2" FPT Red. Bush.
Poly Pipe Tee
BJO TEE050
BJO TEE075
BJO TEE100
BJO TEE125
BJO TEE150
BJO TEE200
1/2" Poly Pipe Tee
3/4" Poly Pipe Tee
1" Poly Pipe Tee
1 1/4" Poly Pipe Tee
1 1/2" Poly Pipe Tee
2" Poly Pipe Tee
Poly Elbows 90°
BJO EL075-90
BJO EL100-90
BJO EL125-90
BJO EL150-90
BJO EL200-90
3/4" Poly Pipe Elbow 90°
1" Poly Pipe Elbow 90°
1 1/4" Poly Pipe Elbow 90°
1 1/2" Poly Pipe Elbow 90°
2" Poly Pipe Elbow 90°
Poly Street Elbows 90°
BJO SL075-90
BJO SL100-90
BJO SL125-90
BJO SL150-90
BJO SL200-90
3/4" Pipe Street Elbow 90°
1" Pipe Street Elbow 90°
1 1/4" Pipe Street Elbow 90°
1 1/2" Pipe Street Elbow 90°
2" Pipe Street Elbow 90°
Poly Straight Hose Barbs
BJO HB050-075
1/2" Male Thread x 3/4" HB
BJO HB075
3/4" Male Thread x 3/4" HB
BJO HB100
1" Male Thread x 1" HB
BJO HB100-075
1" Male Thread x 3/4" HB
BJO HB100-125
1" Male Thread x 1 1/4" HB
BJO HB125
1 1/4" Male Thread x 1 1/4" HB
BJO HB150
1 1/2" Male Thread x 1 1/2" HB
BJO HB150-125
1 1/2" Male Thread x 1 1/4" HB
BJO HB150-200
1 1/2" Male Thread x 2" HB
BJO HB200
2" Male Thread x 2" HB
BJO HB200-155
2" Male Thread x 1 1/2" HB
Part #
Description
BJO VSF200
2" Male Adaptor X 2" Female NPT
BJO VSFMT200 2" Male Adaptor X 2" Male NPT
BJO VSFHB200 2" Male Adaptor X 2" Male Hose Barb
(For all tanks –
poly, wood, steel)
Reducing Bushing
BJO RB125-075
BJO RB125-100
BJO RB150-075
BJO RB200-075
BJO RB200-100
BJO RB200-150
POLYPROPYLENE HOSE BARBS
• Stainless steel bolts
• Glass filled polypropylene
• Multiple design options
• Unique patented compact design
• Lightweight
• Maximum operating pressure 100 psi
@ 70° F. 75 psi @ 150° F.
• All PTFE Seals
Bulkhead Fittings
1/2" x Short Poly Nipple
3/4" x Short Poly Nipple
3/4" x 4" Poly Nipple
3/4" x 6" Poly Nipple
1" x Short Poly Nipple
1" x 4" Poly Nipple
1" x 6" Poly Nipple
1 1/4" x Short Poly Nipple
1 1/4" x 4" Poly Nipple
1 1/4" x 6" Poly Nipple
1 1/2" x Short Poly Nipple
2" x Short Poly Nipple
2" x 6" Poly Nipple
Poly Street Elbows 45°
BJO SL125-45
1 1/4" Poly Pipe Street Elbow 45°
BJO SL150-45
1 1/2" Poly Pipe Street Elbow 45°
BJO SL200-45
2" Poly Pipe Street Elbow 45°
2" Standard Port, Ball Valves with 1.5" Ball Opening
®
BJO NIP050-SH
BJO NIP075-SH
BJO NIP075-4
BJO NIP075-6
BJO NIP100-SH
BJO NIP100-4
BJO NIP100-6
BJO NIP125-SH
BJO NIP125-4
BJO NIP125-6
BJO NIP150-SH
BJO NIP200-SH
BJO NIP200-6
Poly 90° Hose Barbs
BJO HB050/075-90
BJO HB075-90
BJO HB100-90
BJO HB100/125-90
BJO HB125-90
BJO HB125/100-90
BJO HB125/150-90
BJO HB150-90
BJO HB200/150-90
BJO HB200-90
1/2" Male Thread x 3/4" HB 90°
3/4" Male Thread x 3/4" HB 90°
1" Male Thread x 1" HB 90°
1" Male Thread x 1 1/4" HB 90°
1 1/4" Male Thread x 1/4" HB 90°
1 1/4" Male Thread x 1" HB 90°
1 1/4" Male Thread x 1 1/2" HB 90°
1 1/2" Male Thread x 1 1/2" HB 90°
2" Male Thread x 1 1/2" HB 90°
2" Male Thread x 2" HB 90°
POLY BOLTED “BOTTOM DRAIN" TANK FLANGES
BJO BF100BD
BJO BF125BD
BJO BF150BD
1" x 1" Threaded Flange EPDM
1 1/4" x 1" Threaded Flange EPDM
1 1/2" x 2" Threaded Std. Port Flange EPDM
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
HIGH DENSITY, ROTO MOLDED POLY TANKS
POTABLE WATER • CHEMICALS • SAP • CIDER • FERTILIZERS
THERE'S JUST NO SUBSTITUTE FOR SNYDER TANKS.
Some of our more popular stock items - Contact us for a complete catalog of all SYNDER products
PCO TANKS
PART #
GALLONS
OUTLET SPECS
DIAMETER
HEIGHT
LENGTH
TAN 109137
30 gallon
U
19"
22-1/2"
24-1/2"
TAN 117137
50 gallon
U
19"
22-1/2"
38"
TAN 120137
100 gallon
U
30"
31"
38"
TAN 157137
150 gallon
U
36"
29"
48"
TAN 166137
200 gallon
U
36"
39-1/2"
48-1/2"
TAN 172137
300 gallon
U
38"
36-3/4"
69"
• Molded-in gallonage markers (indicators)
• Flat spots on each for easy agitation
• Design requires no additional support or banding
• UV inhibitors are molded in for longer tank life
LEG TANKS
• Molded-in gallonage markers (indicators)
• Free standing HLT requires no cradles for
support
• Ribbed for strength with built-in supports
• UV inhibitors are molded in for longer tank life
PART #
GALLONS
OUTLET SPECS
DIAMETER
HEIGHT
LENGTH
TAN 10837
30 gallon
G
23"
25-3/4"
19-1/2"
TAN 10637
60 gallon
A
23"
25-3/4"
38"
TAN 11237
125 gallon
S
30"
34-1/2"
50"
TAN 12237
200 gallon
S
41"
31-3/4"
54"
TAN 12837
230 gallon
S
38"
42-1/2"
52"
TAN 13237
300 gallon
S
38"
42-1/2"
72"
TAN 14037
525 gallon
E
48"
52-1/2"
75"
TAN 13637
730 gallon
E
57-1/2"
57-1/2"
80"
VERTICAL TANKS
GALLONS
OUTLET SPECS
DIAMETER
HEIGHT
550 gallon
N1
64"
46"
TAN 18037
550 gallon
N1
48"
74"
TAN 18337
1100 gallon
64"
90"
TAN 17137
1100 gallon
N2
I
86"
56"
TAN 17737
1500 gallon
I
86"
73"
TAN 741018
3000 gallon
N2
102"
97"
SNYDER TANKS
• Heavy duty bolted fittings standard on 550
gallon and above to reduce threat of fitting
loosening during use
• Fitting compatible siphon tubes to allow bottom
to fill of tank
• Molded-in tie downs for securing and lift lugs
for easy movement
• UV inhibitors molded in for longer tank life
PART #
TAN 18237
OUTLETS
A=6" fill, one 3/4" outlet with anti-vortex
C=10" fill, two 1-1/4" outlet (1 with anti-vortex)
U=No holes or fittings, Fittings can be ordered
separately
E=10" fill, one 2" HD outlet with siphon
N2=18" manway, one 2" bolted outlet with siphon
N1=18" manway, one 2" HD outlet with siphon
G= 6" cap, no outlet
S= 10" fill, one 1 1/4" outlet
I= 10" fill, one 2" bolted outlet with syphon tube
HORIZONTAL TANKS
PART #
GALLONS
OUTLET SPECS
DIAMETER
HEIGHT
LENGTH
TAN 10337
25 gallon
55 gallon
110 gallon
150 gallon
150 gallon
200 gallon
200 gallon
A
A
C
C
C
C
C
23"
23"
30"
30"
32"
32"
38"
26-3/4"
38-1/4"
49-3/4"
34-3/4"
36-1/2"
36-1/2"
40-1/2"
19"
38"
50"
60"
56"
71"
52"
TAN 10537
TAN 11137
TAN 11337
TAN 11537
TAN 12337
TAN 12537
Snyder Standard Bulkhead
Fittings (With EPDM gaskets)
SNY 340001
SNY 340002
SNY 340003
SNY 340004
3/4"
1"
1 1/4"
1 1/2"
IBC Tank Access Adapter
2" Buttress x 2" Male
NPT threads with
Santoprene gasket
BJO TA283
• 10" threaded cap for easy filling
• Molded-in gallonage markers (indicators)
• Center sumps and end flat spots
• UV inhibitors molded in for longer tank life
• Cradles required for support
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
97
Spray Hose
Call OESCO, Inc. for all of your hose needs. We stock these hoses along with lay-flat discharge and custom hydraulic hoses
LOW PRESSURE RUBBER SPRAY HOSE
MCG 1/4X2-67BH - 1/4" ID - 300 PSI rated
MCG 3/8X2-67BH - 3/8" ID - 300 PSI rated
MCG 1/2X2-67BH - 1/2" ID - 300 PSI rated
MCG 5/8X2-67BH - 5/8" ID - 200 PSI rated
MCG 3/4X2-67BH - 3/4" ID - 200 PSI rated
MCG 1X2-67BH - 1" ID - 200 PSI rated
MCG 1-1/4X2-67BH - 1 1/4" ID - 150 PSI rated
MCG 1-1/2X2-67BH - 1 1/2" ID - 250 PSI rated
GOODYEAR 600 PSI BRAID-REINFORCED
PVC SPRAY HOSE
MCG 006Pliovic1800 - 3/8" ID - 600 PSI PVC hose
MCG 008Pliovic1800 - 1/2" ID - 600 PSI PVC hose
MCG 012Pliovic1800 - 3/4" ID - 600 PSI PVC hose
Spray hose is
sized by ID
(inside diameter)
Hose can
be cut to
any length
SUCTION HOSE
HIGH PRESSURE RUBBER SPRAY HOSE
750 PSI rated
MCG 006-NR-SPRAY - 3/8" ID Spray Hose
MCG 008-NR-SPRAY - 1/2" ID Spray Hose
MCG 012-NR-SPRAY - 3/4" ID Spray Hose
MCG 016-NR-SPRAY - 1" ID Spray Hose
We supply vinyl and all weather suction hose for suction
use which can also be used for low pressure transfer
hose. Other suction hose available - call for details.
MCG 016-300-EPDM - 1" ID - all weather rubber
MCG 020-300-EPDM - 1 1/4" ID - all weather rubber
MCG 024-300-EPDM - 1 1/2" ID - all weather rubber
MCG 032-300-EPDM - 2" ID - all weather rubber
MCG 040-300-EPDM - 2 1/2" ID - all weather rubber
MCG 048-300-EPDM - 3" ID - all weather rubber
Fittings
and
Coupling
sets
installed
to order
NYLON BRAIDED HOSE
HOSE
Nylon braided hose, 250 lbs. maximum pressure sizes
available, food & beverage rated.
FLO 2H5015-0375 - 3/8" ID - 225 PSI
FLO 2H5015-050 - 1/2" ID - 200 PSI
FLO 2H5015-0625 - 5/8" ID - 200 PSI
FLO 2H5015-075 - 3/4" ID - 150 PSI
FLO 2H5015-100 - 1" ID - 125 PSI
FLO 2H5015-125 - 1 1/4" ID - 100 PSI
CLEAR SUCTION HOSE
REA HNP075 - 3/4" Armovin wire reinforced PVC
REA HNP100 - 1" Armovin wire reinforced PVC
REA HNP125 - 1 1/4" Armovin wire reinforced PVC
REA HNP150 - 1 1/2" Armovin wire reinforced PVC
REA HNP200 - 2" Armovin wire reinforced PVC
We stock
thousands
of feet of
hose!
CLEAR PVC TUBING, FDA COMPLIANT
MCG ABH02017 - 1/4" ID 1/16" wall thickness
MCG ABH02027 - 3/8" ID 1/16" wall thickness
MCG ABH02036 - 1/2" ID 1/16" wall thickness
MCG ABH02046 - 5/8" ID 1/8" wall thickness
MCG ABH02053 - 3/4" ID 1/8" wall thickness
MCG ABH00062 - 1" ID 1/8" wall thickness
MCG ABH00071 - 1-1/4" ID 1/4" wall thickness
REINFORCED CLEAR PVC TUBING,
FDA COMPLIANT
FLO 2XWT100-100 - 1" diameter
FLO 2XWT125-100 - 1 1/4" diameter
FLO 2XWT150-100 - 1 1/2" diameter
FLO 2XWT200-100 - 2" diameter
GILMORE FLEXOGEN GARDEN HOSE
8 ply construction assures durability in all weather. Double tire
cord reinforced for strength. Lightweight and flexible. 500 PSI
burst rated.
The last hose you'll ever buy!!!
Flexogen is the hose that has long set the standard for
quality in garden hoses. Recognized by consumers and
trade alike, it offers the ultimate in quality and value.
Sizes available:
GIL 10-12025 - 1/2" ID x 25' long - GHT couplings • 3 lbs./roll
GIL 10-12050 - 1/2" ID x 50' long - GHT couplings • 5 lbs./roll
GIL 10-58050 - 5/8" ID x 50' long - GHT couplings • 8 lbs./roll
GIL 10-58075 - 5/8" ID x 75' long - GHT couplings • 12 lbs./roll
GIL 10-58100 - 5/8" ID x 100' long - GHT couplings • 16 lbs./roll
GIL 10-34025 - 3/4" ID x 25' long - uncoupled • 5 lbs./roll
98
GIL 10-34250 - 3/4" ID x 250' long - uncoupled • 52 lbs./roll
GIL 10-34050 - 3/4" ID x 50' long - GHT couplings • 8 lbs./roll
GIL 10-34075 - 3/4" ID x 75' long - GHT couplings • 12 lbs./roll
GIL 10-34100 - 3/4" ID x 100' long - GHT couplings • 21 lbs./roll
GIL 10-10075 - 1" ID x 75' long - coupled 1" NPT • 32 lbs./roll
GIL 10-10100 - 1" ID x 100' long - coupled 1" NPT • 40 lbs./roll
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
BRAID-REINFORCED PROFESSIONAL PVC HOSE
OUR BEST SPRAY HOSE!
Order by the foot or by the roll.
PVC
High Pressure
Spray Hose
3 Year Warranty
So good we warrantee it for
3 years! Reinforced PVC
with high burst strength.
Melded inner core and
cover to form complex
reinforcement that will
not separate under high
pressure. Light, bright
colors are easy to see,
won't mark curbs or
sidewalks. Sizes to fit
any need. Costs you less
because it lasts longer.
Inner reinforced PVC Hose for high strength
Dark Gray Spiral
Light Gray PVC
Neon PVC
Couplings installed on hose to order.
Please specify installation requirements when ordering. See pages 101 & 102 for couplings.
Note: Other Green Garde hose available by special order only.
Example: twin hose, clear spiral PVC hose, etc.
High-Pressure, Braid-Reinforced, Neon, PVC Hose
800 PSI working pressure, 3000 PSI burst
GRE 38690 - 1/2" x 600'
GRE 38553 - 5/8" x 300'
GRE 38692 - 5/8" x 400'
GRE 38695 - 3/4" x 300'
GRE 38696 - 3/4" x 400'
High-Pressure, Spiral-Reinforced, Light Gray, PVC Hose
600 PSI working pressure, 2400 PSI burst
GRE 38710 - 3/8" x 300'
GRE 38712 - 3/8" x 400'
GRE 38715 - 1/2" x 300'
GRE 38717 - 1/2" x 400'
Dark Gray Spiral Hose
300 PSI working pressure, 1200 PSI burst
GRE 38725 - 3/8" x 300'
GRE 38726 - 3/8" x 400'
GREEN GARDE SPRAY HOSE
GRE 38684 - 3/8" x 300'
GRE 38685 - 3/8" x 400'
GRE 38686 - 3/8" x 600'
GRE 38688 - 1/2" x 300'
GRE 38689 - 1/2" x 400'
GRE 38727 - 1/2" x 300'
GRE 38728 - 1/2" x 400'
HOSE CUTTER
Here's a fast and clean tool to cut hose.
No deburring necessary and it's lightweight with strong nylon handles.
Replacement blades available.
GRE 38930 - Hose Cutter • 8 oz.
GRE 38931 - Replacement Blade •
1 oz.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
99
Fittings
®
Stainless Steel Fittings
All 304 Stainless Steel
Nylon Hose Fittings
DVC TSST222 - 1/4" x 1/4" x 1/4" MPT
DVC TSST333 - 3/8" x 3/8" x 3/8" MPT
DVC TSST444 - 1/2" x 1/2" x 1/2" MPT
DVC TSST666 - 3/4" x 3/4" x 3/4" MPT
MALE PIPE THREAD BY HOSE
BARB - MPT X HB
HYP 9A14 - 1/4" x 1/4"
HYP 9A12 - 1/2" x 1/2"
HYP 9A34 - 3/4" x 3/4"
HYP 9A100 - 1" x 1"
STREET ELBOW: FEMALE
PIPE THREAD BY MALE
PIPE THREAD - MPT X FPT
HYP 7SE14 - 1/4" x 1/4"
HYP 7SE12 - 1/2" x 1/2"
HYP 7SE34 - 3/4" x 3/4"
HYP 7SE100 - 1" x 1"
COUPLING: FEMALE PIPE
THREAD - FPT X FPT
HYP 7FC14 - 1/4" x 1/4"
HYP 7FC12 - 1/2" x 1/2"
HYP 7FC34 - 3/4" x 3/4"
HYP 7FC100 - 1" x 1"
NYLON TEES
1/4" Hose Size
DVC TN21 - 1/8"MPT •
DVC TN22 - 1/4"MPT •
DVC TN23 - 3/8"MPT •
DVC TN24 - 1/2" MPT •
DVC TN26 - 3/4" MPT •
DVC TN28 - 1" MPT •
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
5/16" Hose Size
DVC TN252 - 1/4" MPT • 1 oz.
3/8" Hose Size
DVC TN31 - 1/8" MPT
DVC TN32 - 1/4" MPT
DVC TN33 - 3/8" MPT
DVC TN34 - 1/2" MPT
DVC TN36 - 3/4" MPT
•
•
•
•
•
1 oz.
1 oz.
1 oz
1 oz.
1 oz.
1/2" Hose Size
TEE: FEMALE PIPE THREAD
HYP 7TT14 - 1/4" x 1/4" x 1/4"
HYP 7TT12 - 1/2" x 1/2" x 1/2"
HYP 7TT34 - 3/4" x 3/4" x 3/4"
HYP 7TT100 - 1" x 1" x 1"
ELBOW: FEMALE PIPE
THREAD 90° - FPT X FPT
STAINLESS STEEL/NYLON FITTINGS
HYP 7LL14 - 1/4" x 1/4"
HYP 7LL12 - 1/2" x 1/2"
HYP 7LL34 - 3/4" x 3/4"
HYP 7LL100 - 1" x 1"
REDUCER BUSHING MPT X FPT
HYP 7RB3814 - 3/8" x 1/4"
HYP 7RB1214 - 1/2" x 1/4"
HYP 7RB1238 - 1/2" x 3/8"
HYP 7RB3412 - 3/4" x 1/2"
HYP 7RB10034 - 1" x 3/4"
DVC TN41 - 1/8" MPT •
DVC TN42 - 1/4" MPT •
DVC TN43 - 3/8" MPT •
DVC TN44 - 1/2" MPT •
DVC TN46 - 3/4" MPT •
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
5/8" Hose Size
DVC TN53 - 3/8" MPT • 2 oz.
DVC TN54 - 1/2" MPT • 2 oz.
DVC TN56 - 3/4" MPT • 2 oz.
3/4" Hose Size
DVC TSSS222 - 1/4" x 1/4" x 1/4"
DVC TSSS333 - 3/8" x 3/8" x 3/8"
DVC TSSS444 - 1/2" x 1/2" x 1/2"
DVC TSSS666 - 3/4" x 3/4" x 3/4"
TUFF LITE 90° NYLON ELL
DVC TLSS22 – 1/4" Hose size
DVC TLSS33 – 3/8" Hose size
DVC TLSS44 – 1/2" Hose size
DVC TLSS66 – 3/4" Hose size
TUFF LITE 90° NYLON
THREADED ELL
DVC TLS21 – 1/8" MPT, 1/4" Hose
DVC TLS22 – 1/4" MPT, 1/4" Hose
DVC TLS23 – 3/8" MPT, 1/4" Hose
DVC TLS31 – 1/8" MPT, 3/8" Hose
DVC TLS32 – 1/4" MPT, 3/8" Hose
DVC TLS33 – 3/8" MPT, 3/8" Hose
DVC TLS34 – 1/2" MPT, 3/8" Hose
DVC TLS36 – 3/4" MPT, 3/8" Hose
DVC TLS42 – 1/4" MPT, 1/2" Hose
DVC TLS43 – 3/8" MPT, 1/2" Hose
DVC TLS44 – 1/2" MPT, 1/2" Hose
DVC TLS46 – 3/4" MPT, 1/2" Hose
DVC TLS48 – 1"MPT, 1/2" Hose
2 oz.
2 oz.
2 oz.
2 oz.
DVC TLS53 – 3/8" MPT, 5/8" Hose
DVC TLS54 – 1/2" MPT, 5/8" Hose
DVC TLS56 – 3/4" MPT, 5/8" Hose
DVC TLS58 – 1" MPT, 5/8" Hose
DVC TN86 - 3/4" MPT • 3 oz.
DVC TN88 - 1" MPT • 3 oz.
DVC TLS63 – 3/8" MPT, 3/4" Hose
DVC TLS64 – 1/2" MPT, 3/4" Hose
DVC TLS66 – 3/4" MPT, 3/4" Hose
DVC TLS68 – 1" MPT, 3/4" Hose
DVC TN63 - 3/8" MPT •
DVC TN64 - 1/2" MPT •
DVC TN66 - 3/4" MPT •
DVC TN68 - 1" MPT •
1" Hose Size
1 1/4" Hose Size
DVC TN158 - 1" MPT • 3 oz.
DVC TN150 - 1 1/4" MPT • 3 oz.
DVC TN1520 - 1 1/2" MPT • 3 oz.
DVC TLS86 – 3/4" Male NPT, 1" Hose
DVC TLS88 – 1" Male NPT, 1" Hose
We stock
thousands
of
fittings.
Call us
with your
needs.
1 1/2" Hose Size
TUFF-LITE MENDER - (HIGH TENSILE NYLON)
NIPPLE MPT X LENGTH
DVC TN2015 - 1 1/4" MPT • 3 oz.
DVC TN200 - 1 1/2" MPT • 3 oz.
HYP 714112 - 1/4" x 1 1/2"
HYP 714300 - 1/4" x 3"
HYP 712118 - 1/2" x 1 1/8"
HYP 712112 - 1/2" x 1 1/2"
HYP 712200 - 1/2" x 2"
HYP 734138 - 3/4" x 1 3/8"
HYP 734400 - 3/4" x 4"
HYP 7100112 - 1" x 1 1/2"
HYP 7100400 - 1" x 4"
2" Hose Size
DVC TM2 - 1/4" • 1 oz.
DVC TM25 - 5/16" • 1 oz.
DVC TM3 - 3/8" • 1 oz.
DVC TM4 - 1/2" • 1 oz.
DVC TM5 - 5/8" • 2 oz.
DVC TM6 - 3/4" • 2 oz.
DVC TM8 - 1" • 2 oz.
DVC TN250 - 2" MPT • 4 oz.
Order
Online
TUFF-LITE NYLON INSERTS & SHORT SHANK COUPLINGS
Female
1/2" Hose Size
DVC TCF74 - 3/4" GHT • 1 oz.
3/4" Hose Size
DVC TCF76 - 3/4" GHT • 1 oz.
Male
1/2" Hose Size
DVC TCM74 - 3/4" GHT • 1 oz.
3/4" Hose Size
DVC TCM76 - 3/4" GHT • 1 oz.
100
NYLON TEES
DIXON BRASS HOSE MENDER
DVC BM15 - 3/16"
DVC BM2 - 1/4"
DVC BM25 - 5/16"
DVC BM3 - 3/8"
DVC BM4 - 1/2"
DVC BM6 - 3/4"
•
•
•
•
•
•
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
“BOSS" HOSE MENDER
Collars to engage grip fingers of “Boss" clamps.
Plated materials malleable iron or plated tubular
steel depending on size.
DVC KM42 - 1/2" • .25 lb.
DVC KM52 - 5/8" • .25 lb.
DVC KM62 - 3/4" • .50 lb.
DVC KM82 - 1" • .75 lb.
Other sizes available by special order
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
NEW
FORGED 90° ELBOW:
PART #
FAI 99-B
PIPE
1/4
CLOSE NIPPLE:
PART #
FAI 112-A
FAI 112-B
FAI 112-C
FAI 112-D
FAI 112-E
FAI 112-H
PIPE
1/8
1/4
3/8
1/2
3/4
1
PART #
FAI 116-A
FAI 116-B
FAI 116-C
PIPE
1/8
1/4
3/8
1/2
PIPE
1/8
1/4
3/8
PIPE
1/8
1/4
3/8
TEE (CAST BRONZE):
PART #
FAI 101CA-D
FAI 101CA-E
PIPE
1/2
3/4
90° STREET ELBOW
(CAST BRONZE):
PART #
FAI 116CA-D
FAI 116CA-E
REDUCING HEX NIPPLE:
PART #
FAI 122-BA
FAI 122-CA
FAI 122-CB
FAI 122-DB
FAI 122-DC
PART #
FAI 101-A
FAI 101-B
FAI 101-C
FORGED 90°
STREET ELBOW:
HEX NIPPLE:
PART #
FAI 122-A
FAI 122-B
FAI 122-C
FAI 122-D
FORGED TEE:
PIPE PIPE
1/4 to 1/8
3/8 to 1/8
3/8 to 1/4
1/2 to 1/4
1/2 to 3/8
LONG NIPPLE:
PIPE
1/2
3/4
FORGED 90° ELBOW:
BRASS ADAPTER MALE GHT
X FEMALE NPT:
PART #
FAI 100-A
FAI 100-B
FAI 100-C
DVC BA794 - MHT x 1/2" FPT
DVC BA796 - MHT x 3/4" MPT
DVC FM1076 - MHT x 1" FPT
Weight: 2 oz. each
PIPE
1/8
1/4
3/8
PART #
1/4 NPT
FAI 113-B1-1/2
FAI 113-B2
FAI 113-B3
PIPE
1/4
1/4
1/4
LENGTH
1 1/2"
2"
3"
3/8 NPT
FAI 113-C1-1/2
FAI 113-C2
FAI 113-C3
3/8
3/8
3/8
1 1/2"
2"
3"
EXTRUDED 45° STREET ELBOW:
BRASS ADAPTER MALE
GHT X MALE NPT:
1/2 NPT
FAI 113-D1-1/2
FAI 113-D2
FAI 113-D3
1/2
1/2
1/2
1 1/2"
2"
3"
PART #
FAI X124-A
FAI X124-B
FAI X124-C
DVC BA73 - MHT x 3/8" MPT
DVC BA74 - MHT x 1/2" MPT
DVC BA776 - MHT x 3/4" MPT
Weight: 2 oz. each
90° ELBOW
(CAST BRONZE):
PART #
FAI 100CA-D
FAI 100CA-E
PIPE
1/2
3/4
PIPE
1/8
1/4
3/8
PART #
FAI 110-BA
FAI 110-CA
FAI 110-CB
FAI 110-DA
FAI 110-DB
FAI 110-DC
FAI 110-EB
FAI 110-ED
FAI 110-HE
PIPE PIPE
1/4 to 1/8
3/8 to 1/8
3/8 to 1/4
1/2 to 1/8
1/2 to 1/4
1/2 to 3/8
45° STREET ELBOW
(CAST BRONZE):
PART #
FAI 124-D
FAI 124-E
MALE FEMALE
PIPE
PIPE
1/4 to 1/8
3/8 to 1/8
3/8 to 1/4
1/2 to 1/8
1/2 to 1/4
1/2 to 3/8
3/4 to 1/4
3/4 to 1/2
1 to 3/4
PIPE
1/2
3/4
BRASS ADAPTER FEMALE
GHT X FEMALE NPT:
EXTRUDED 45° ELBOW:
PART #
FAI X105-A
PIPE
1/4
PIPE
1/8
1/4
3/8
1/2
3/4
EXTRUDED CROSS:
PART #
FAI X102-B
PIPE
1/4
FORGED MALE
BRANCH TEE:
PART #
FAI X106-B
PIPE
1/8
1/4
3/8
1/2
3/4
PIPE
1/4
FORGED STREET TEE:
PART #
FAI 107-B
Female: All Brass
Including Swivel Nut
DVC BS848 - 1" • .50 lb.
DVC FBB150 - 1 1/2" • .75 lb.
DVC FBB200 - 2" • 1 lb.
DVC FBB250 - 2 1/2" • 2 lbs.
DVC FBB300 - 3" • 3 lbs.
DVC FBB400 - 4" • 4 lbs.
CAP:
PART #
FAI 108-A
FAI 108-B
FAI 108-C
FAI 108-D
FAI 108-E
DVC BA974 - FHT x 1/2" FPT
DVC BA976 - FHT x 3/4" FPT
Weight: 2 oz. each
“KING" SHORT SHANK SUCTION
COUPLINGS (NPSM THREAD)
SQUARE PLUG:
PART #
FAI 109-A
FAI 109-B
FAI 109-C
FAI 109-D
FAI 109-E
Male:
DVC BA777 - MHT x MHT
Female:
DVC BA977- not pictured
FHT x FHT
Weight: 2 oz. each
BRASS FITTINGS
BUSHING
DVC BMA974 - FHT x 1/2" MPT
DVC BMA976 - FHT x 3/4" MPT
DVC IM7610T - FHT x 1" MPT
Weight: 2 oz. each
BRASS GHT X GHT ADAPTERS:
REDUCING COUPLING:
PART #
FAI 119-BA
FAI 119-CA
FAI 119-CB
FAI 119-DA
FAI 119-DB
FAI 119-DC
BRASS ADAPTER FEMALE
GHT X MALE NPT:
PIPE
1/4
Male - All Brass
DVC BS818 - 1" • .50 lb.
DVC MB125 - 1 1/4" • .50 lb.
DVC MB150 - 1 1/2" • .75 lb.
DVC MB200 - 2" • 1 lb.
DVC MB250 - 2 1/2" • 2 lbs.
DVC MB300 - 3" • 3 lbs.
DVC MB400 - 4" • 4 lbs.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
101
Plated Steel Coupling Sets and Hose Fittings for Spray Hose
Coupling sets are important factors in prolonging the life of your high pressure hose. We supply Green
Garde hose fittings on all high pressure hose we sell. These hose fittings are designed to assure
maximum flow with large ID and long shanks. The shank end is rounded to prevent early hose failure
and to aid in the installation of fittings on the hose.
All below threads are GHT
GREEN GARDE HIGH PRESSURE HOSE FITTINGS
No.
Description
GRE 38941
GRE 38940
GRE 38944
GRE 38943
Fits Hose ID inches
1/2" barb shank X MHT
1/2" barb shank
(w/nut and washer) X FHT
5/8" barb shank X MHT
5/8" barb
(w/nut & washer) X FHT
GRE 38947
3/4" barb X MHT
GRE 38946
3/4" barb
(w/nut & washer) X FHT
DIXON HIGH PRESSURE
3/8"HOSE FITTINGS
HOSE COUPLINGS/FITTINGS
2 5/16"
1/2"
5/8"
2 5/16"
2 3/8"
5/8"
2 3/8"
3/4"
2 5/16"
1/8" x 1/8"
3/16" x 1/8"
3/16" x 1/4"
1/4" x 1/8"
1/4" x 1/4"
1/4" x 3/8"
5/16" x 1/8"
5/16" x 1/4"
5/16" x 3/8"
3/8" x 1/8"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 1/2"
1/2" x 1/4"
1/2" x 3/8"
1/2" x 1/2"
1/2" x 3/4"
5/8" x 3/8"
5/8" x 1/2"
5/8" x 3/4"
3/4" x 1/2"
3/4" x 3/4"
1" x 3/4"
1" x 1"
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
Sh.Wt.
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
2 oz.
1 oz.
1 oz.
2 oz.
1 oz.
1 oz.
1 oz.
2 oz.
1 oz.
2 oz.
2 oz.
3 oz.
2 oz.
2 oz.
3 oz.
2 oz.
3 oz.
3 oz.
3 oz.
washer
38940
38941
2 5/16"
DVC SLS347 3/8" hose barb x 3/4" FHT
DVC SLS317 3/8" hose barb x 3/4" MHT
Hose shank X Male Pipe Thread
DVC BN11
DVC BN151
DVC BN152
DVC BN21
DVC BN22
DVC BN23
DVC BN251
DVC BN252
DVC BN253
DVC BN31
DVC BN32
DVC BN33
DVC BN34
DVC BN42
DVC BN43
DVC BN44
DVC BN46
DVC BN53
DVC BN54
DVC BN56
DVC BN64
DVC BN66
DVC BN86
DVC BN88
1/2"
3/4"
BRASS HOSE
BARBS
BN
Shank Length
inches
38943
38944
38946
38947
nut
Complete Green Garde coupling sets. Order by individual part.
Fittings, Coupling Sets and Adapters
Note: All fittings are identified by listing the thread as
(m) male, (f) female, (pt) pipe thread. (GHT) Hose
thread means 3/4" garden hose thread, (m) male,
(f) female . Hose barbs (HB) or hose shanks are the size
of the ID of the hose the barb is fitting into.
HOSE SHANK
TYPE FITTING
PLATED STEEL
BRASS SHORT
SHANK FITTINGS
GHT THREAD X HOSE SHANK
Hose shank X Male Pipe Thread
DVC STC1
DVC STC5
DVC STC10
DVC STC15
DVC STC20
DVC STC25
DVC STC30
DVC STC35
1/2" x 1/2" MPT • 1/4 lb.
3/4" x 3/4" MPT • 1/4 lb.
1' x 1" MPT • 1/4 lb.
1 1/4" x 1 1/4" MPT • 1/2 lb.
1 1/2" x 1 1/2" MPT • 1/2 lb.
2" x 2" MPT • 1 lb.
2 1/2" x 2 1/2" MPT • 2 lbs.
3" x 3" MPT • 3 lbs.
STAINLESS STEEL
SHORT SHANK
COUPLINGS
Hose shank X Male Pipe Thread
DVC RST1
DVC RST5
DVC RST10
DVC RST15
DVC RST20
DVC RST25
Female with Swivel:
DVC BCF73 - FHT x 3/8" • 2 oz.
DVC BCF74 - FHT x 1/2" • 2 oz.
DVC BCF75 - FHT x 5/8" • 2 oz.
DVC BCF76 - FHT x 3/4" • 2 oz.
Male:
DVC BCM73 - MHT x 3/8" • 2 oz.
DVC BCM74 - MHT x 1/2" • 2 oz.
DVC BCM75 - MHT x 5/8" • 2 oz.
DVC BCM76 - MHT x 3/4" • 2 oz.
WINGNUT FITTINGS
1/2" x 1/2" MPT • 1/4 lb.
3/4" x 3/4" MPT • 1/4 lb.
1" x 1" MPT • 1/4 lb.
1 1/4" x 1 1/4" MPT • 1/2 lb.
1 1/2" x 1 1/2" MPT • 1/2 lb.
2" x 2" MPT • 1 lb.
"KING" STEEL NIPPLES
Washers for Suction, Long
and Short Shank Couplings
DVC KHN222 - 1/4" x 1/4" MPT
DVC KHN322 - 3/8" x 1/4" MPT
DVC KHN332 - 3/8" x 3/8" MPT
DVC KHN342 - 3/8" x 1/2" MPT
DVC KHN422 - 1/2" x 1/4" MPT
DVC KHN432 - 1/2" x 3/8" MPT
DVC KHN442 - 1/2" x 1/2" MPT
DVC KHN462 - 1/2" x 3/4" MPT
DVC KHN642 - 3/4" x 1/2" MPT
DVC KHN662 - 3/4" x 3/4" MPT
DVC KHN862 - 1" x 3/4" MPT
DVC KHN882 - 1" x 1" MPT
102
•
•
•
•
•
•
•
•
•
•
•
•
1 oz.
1 oz.
2 oz.
4 oz.
1 oz.
4 oz.
4 oz.
6 oz.
2 oz.
6 oz.
6 oz.
10 oz.
Rubber Washer:
DVC KRW5 - 3/4"
DVC KRW10 - 1"
DVC KRW15 - 1 1/4"
DVC KRW20 - 1 1/2"
DVC KRW25 - 2"
DVC KRW30 - 2 1/2"
DVC KRW35 - 3"
Leather Washer:
DVC KLW5 - 3/4"
DVC KLW10 - 1"
• Shipping wt.
1 oz. each
Special Note:
Use DVC KLW5
washers for
standard 3/4" coupling sets.
Elbow fitting REA EL050F037HB
90° 3/8" Barb X 1/2" FPT Wingnut
REA EL050F050HB
90° 1/2" Barb X 1/2" FPT Wingnut
Straight fitting HYP 9910-110130
1/2" Barb X 1/2" FPT Wingnut
HYP 9910-110131
3/8" Barb X 1/2" FPT Wingnut
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
GHT Quick
Couplers
DVC DGH7P
Male Plug X Male GHT
DVC DGH7C
Female Coupler
X Female GHT
NY GLASS COMPONENTS PICTURED
We believe this is the best and
least expensive product in its
field. The many advantages
include cost saving, lightweight,
easy working cams and fast
connecting.
NY-GLASS
Fairview Brass
• Yellow Corrosion Resistant
• Will not go “out of round" when dropped.
• Will not easily cross thread as other
plastic couplings do.
• Weight is 1/6 that of brass and 1/2
that of aluminum.
GHT “Y" Coupler
Use N suffix for NY-Glass.
FAI 202W
GHT 4-Valve
• White Food Grade couplings
• Lightweight
• Easy to install
• Many styles available
Manifold Nozzle
DVC 500-GH4V
Use F suffix for Food-Flo.
Size
NY-Glass
Food-Flo
Type A
Male Adapter X Female N.P.T.
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
FLO-025-A-N
FLO-037-A-N
FLO-050-A-N
FLO-075-A-N
FLO-100-A-N
FLO-125-A-N
FLO-150-A-N
FLO-200-A-N
Type B
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
Type C
1/2"
5/8"
3/4"
1"
1 1/4"
1 1/2"
2"
FLO-075-A-F
FLO-100-A-F
FLO-150-A-F
FLO-200-A-F
Female Coupler X Male N.P.T.
FLO-050-B-N
FLO-075-B-N
FLO-100-B-N
FLO-125-B-N
FLO-150-B-N
FLO-200-B-N
FLO-075-B-F
FLO-100-B-F
FLO-150-B-F
FLO-200-B-F
Female Coupler X Hose Shank
FLO-050-C-N
FLO-062-C-N
FLO-075-C-N
FLO-100-C-N
FLO-125-C-N
FLO-150-C-N
FLO-200-C-N
FLO-075-C-F
FLO-100-C-F
FLO-150-C-F
FLO-200-C-F
QUICK COUPLINGS
BRASS STRAIGHT THROUGH
QUICK-CONNECT FITTINGS
INSULATED WATER NOZZLE
Heavy duty brass valve and adjusting nut.
Hold open clip locks any spray pattern.
Chrome plated all zinc body. Industrial
strength nylon handle. Rubber head guard
on threaded GHT front version. Hot water
up to 180°F.
DVC SN75
Abrasion resistant.
Certified red brass
castings, stainless
steel springs, noncorrosive nylon stem
guide and stainless
steel screen. For pump
suction hoses.
DVC STMC2 - 1/4", 4500 PSI
DVC STMC3 - 3/8", 2700 PSI
DVC STMC4 - 1/2", 2500 PSI
DVC STMC6 - 3/4", 2000 PSI
FEMALE NPT COUPLERS
DVC STFC2 - 1/4", 4500 PSI
DVC STFC3 - 3/8", 2700 PSI
DVC STFC4 - 1/2", 2500 PSI
DVC STFC6 - 3/4", 2000 PSI
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
Type E
1/2"
5/8"
3/4"
1"
1 1/4"
1 1/2"
2"
Female Coupler X Female N.P.T.
FLO-025-D-N
FLO-037-D-N
FLO-050-D-N
FLO-075-D-N
FLO-100-D-N
FLO-125-D-N
FLO-150-D-N
FLO-200-D-N
FLO-075-D-F
FLO-100-D-F
FLO-150-D-F
FLO-200-D-F
Male Adapter X Hose Shank
FLO-050-E-N
FLO-062-E-N
FLO-075-E-N
FLO-100-E-N
FLO-125-E-N
FLO-150-E-N
FLO-200-E-N
FLO-075-E-F
FLO-100-E-F
FLO-150-E-F
FLO-200-E-F
Type F Male Adapter X Male N.P.T.
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
FLO-050-F-N
FLO-075-F-N
FLO-100-F-N
FLO-125-F-N
FLO-150-F-N
FLO-200-F-N
FLO-075-F-F
FLO-100-F-F
FLO-150-F-F
FLO-200-F-F
MALE NPT ADAPTERS
GRA 5YM42 - 3/4" Female pipe thread
GRA 5YM43 - 1" Female pipe thread
GRA 5YM44 - 1 1/4" Female pipe thread
GRA 5YM45 - 1 1/2" Female pipe thread
GRA 5YM46 - 2" Female pipe thread
CAMLOCKS/COUPLINGS
CAMPBELL BRASS FOOT VALVES
MALE NPT COUPLERS
TYPE D
Type DP Dust Plug
DVC STMP2B - 1/4", 4500 PSI
DVC STMP3B - 3/8", 2700 PSI
DVC STMP4B - 1/2", 2200 PSI
DVC STMP6B - 3/4", 1700 PSI
3/4"
1"
1 1/2"
2"
FLO-075-DP-N
FLO-100-DP-N
FLO-150-DP-N
FLO-200-DP-N
FLO-075-DP-F
FLO-100-DP-F
FLO-150-DP-F
FLO-200-DP-F
FEMALE NPT ADAPTERS
SUCTION
HOSE
STRAINERS
Type DC Dust Cap
Nickel plated, standard threaded type.
DVC RHS20 - 1 1/2" FPT • 1 1/2 lbs.
DVC RHS25 - 2" FPT • 2 lbs.
DVC RHS30 - 2 1/2" FPT • 2 1/2 lbs.
Other strainer styles and sizes
available by special order
3/4"
1"
1 1/2"
2"
DVC STFP2B - 1/4", 4500 PSI
DVC STFP3B - 3/8", 2700 PSI
DVC STFP4B - 1/2", 2200 PSI
DVC STFP6B - 3/4", 1700 PSI
FLO-075-DC-N
FLO-100-DC-N
FLO-150-DC-N
FLO-200-DC-N
FLO-075-DC-F
FLO-100-DC-F
FLO-150-DC-F
FLO-200-DC-F
Other larger sizes are
available by special order.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
103
HYDRAULIC COUPLINGS
HYDRAULIC QUICK-CONNECT FITTINGS
The Agricultural Quick-Connect features ball style
shut-off valves in both the coupler and the plug.
Operating pressure up to 2500 PSI.
FPT Ball Valve Coupler
PIO 4050-2P – 1/4" NPTF Thread size,
1/4" Body size
PIO 4050-3P – 3/8" NPTF Thread size,
3/8" Body size
PIO 4050-4PMB – 1/2" NPTF Thread
size, 1/2" Body size
BAND-IT JR. C002 TOOL
BAND-IT SMOOTH I.D. CLAMPS
For application of Band-It Jr. Smooth I.D.
Preformed Clamps
Band-it preformed stainless steel clamps.
BDT C002 • 5.7 lbs.
FPT Ball Valve Plug
PIO 4010-2P – 1/4" NPTF Thread size,
1/4" Body size
PIO 4010-3P – 3/8" NPTF Thread size,
3/8" Body size
PIO 8010-4PMB – 1/2" NPTF Thread
size, 1/2" Body size
HYDRAULIC PIPE SWIVEL ADAPTERS
BANDIT CLAMPS/COUPLINGS
Straight Male Pipe by Female Pipe Swivel
DVC 1404-2-2 – 1/8" T2 Female
NPSM, 1/4" T1 Male NPTF
DVC 1404-4-4 – 1/4" T2 Female
NPSM, 1/4" T1 Male NPTF
DVC 1404-6-6 – 3/8" T2 Female
NPSM, 3/8" T1 Male NPTF
DVC 1404-8-8 – 1/2" T2 Female
NPSM, 1/2" T1 Male NPTF
DVC 1404-12-12 – 3/4" T2 Female
NPSM, 3/4" T1 Male NPTF
DVC 1404-16-16 – 1" T2 Female
NPSM, 1" T1 Male NPTF
90° Male Pipe by Female Pipe Swivel
DVC 1501-2-2 – 1/8" T2 Female
NPSM, 1/8" T1 Male NPTF
DVC 1501-4-4 – 1/4" T2 Female
NPSM, 1/4" T1 Male NPTF
DVC 1501-6-6 – 3/8" T2 Female
NPSM, 3/8" T1 Male NPTF
DVC 1501-8-8 – 1/2" T2 Female
NPSM, 1/2" T1 Male NPTF
DVC 1501-12-12 – 3/4" T2 Female
NPSM, 3/4" T1 Male NPTF
DVC 1501-16-16 – 1" T2 Female
NPSM, 1" T1 Male NPTF
45° Male Pipe by Female Pipe Swivel
DVC 1503-4-4 – 1/4" T2 Female
NPSM, 1/4" T1 Male NPTF
DVC 1503-6-6 – 3/8" T2 Female
NPSM, 3/8" T1 Male NPTF
DVC 1503-8-8 – 1/2" T2 Female
NPSM, 1/2" T1 Male NPTF
DVC 1503-12-12 – 3/4" T2 Female
NPSM, 3/4" T1 Male NPTF
DVC 1503-16-16 – 1" T2 Female
NPSM, 1" T1 Male NPTF
Female Pipe by Female Pipe Swivel
DVC 1405-2-2 – 1/8" T2 Female
NPSM, 1/8" T1 Female NPTF
DVC 1405-4-4 – 1/4" T2 Female
NPSM, 1/4" T1 Female NPTF
DVC 1405-6-6 – 3/8" T2 Female
NPSM, 3/8" T1 Female NPTF
DVC 1405-8-8 – 1/2" T2 Female
NPSM, 1/2" T1 Female NPTF
DVC 1405-12-12 – 3/4" T2 Female
NPSM, 3/4" T1 Female NPTF
DVC 1405-16-16 – 1" T2 Female
NPSM, 1" T1 Female NPTF
BAND-IT C001 TOOL
This standard tool can be bench or vise
mounted and is used with the band bulk rolls
or with the J001 adapter for the preformed
clamps. This tool attaches the preformed
clamps to the hose and coupling to make the
most secure fitting possible to avoid all leaks
and failures in the hose.
WORM GEAR CLAMPS
STYLE HSS CLAMPS
All stainless construction combination 5/16"
hexagon and screwdriver slotted screw.
BDT C001 • 5 lbs.
BAND-IT JR. ADAPTER J001
The adapter is necessary when using
the preformed clamps on the C001 tool.
The adapter allows the clamp to be correctly
formed and tail broken flush to the ring.
BDT J001 • 2 lbs.
No.
DVC HSS8
DVC HSS10
DVC HSS12
DVC HSS16
DVC HSS20
DVC HSS24
DVC HSS28
DVC HSS32
DVC HSS36
DVC HSS40
DVC HSS44
DVC HSS48
Diameter Range
From
To
Sh. Wt.
1/2"
29/32"
1 oz.
9/16"
1 1/16"
1 oz.
11/16"
1 1/4"
1 oz.
13/16"
1 1/2"
1 oz.
13/16"
1 3/4"
1 oz.
1 1/16"
2"
1 oz.
1 5/16"
2 1/4"
1 oz.
1 9/16"
2 1/2"
1 oz.
1 13/16"
2 3/4"
1 oz.
2 1/16"
3"
1 oz.
2 5/16"
3 1/4"
1 oz.
2 9/16"
3 1/2"
1 oz.
WORM GEAR CLAMPS - STYLE MAH
CENTER PUNCH TOOL
T-handle screw tensioning tool for up to 5/8"
wide preformed bands
BDT T300 • 3.2 lbs.
Miniature all stainless construction with
combination 1/4" hexagon and screwdriver
slotted screw. 5/16" band width.
No.
DVC
DVC
DVC
DVC
MAH4
MAH6
MAH8
MAH10
Diameter Range
From
To
Sh. Wt.
7/32"
5/8"
1 oz.
7/16"
25/32"
1 oz.
1/2"
29/32"
1 oz.
9/16"
1 1/16"
1 oz.
CENTER PUNCH TOOL
These ratchet action tensioning tools are for
applying center punch and center punch open
end clamps with a center punch lock.
BDT S38 • 1 lb.
POK-IT-TOOL
Lightweight pocket size tool for use with
1/4-3/8" width band. It applies tension and
has a built-in cutter.
BDT J020 • 1.5 lbs.
104
BDT JS240 - 3/4" ID x 1/2" thick • 1 oz.
BDT JS242 - 1" ID x 1/4" thick • 1 oz.
BDT JS243 - 1" ID x 3/8" wide • 2 oz.
BDT JS202 - 1 3/8" ID x 3/8" wide • 2 oz.
BDT JS204 - 1 1/4" ID x 1/2" thick • 2 oz.
BDT JS209 - 2 1/2" ID x 5/8" thick • 2 oz.
BDT JS205 - 1 1/2" ID x 5/8" thick • 2 oz.
BDT JS214 - 4 1/2" ID x 3/4" wide • 2 oz.
BDT JS219 - 8" ID x 3/4" wide • 2 oz.
BDT JS412 - 3 1/2" ID x 3/4" thick • 1/2 lb.
“T" BOLT
CLAMPS
Style STBC
DVC STBC188 from 1.724" to 1.942"
DVC STBC200 from 1.844" to 2.062"
DVC STBC225 from 2.094" to 2.312"
DVC STBC250 from 2.344" to 2.562"
DVC STBC275 from 2.516" to 2.812"
DVC STBC300 from 2.766" to 3.062"
DVC STBC325 from 3.016" to 3.312"
DVC STBC350 from 3.266" to 3.562"
DVC STBC375 from 3.516" to 3.812"
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
DIXON STANDARD
DRY GAUGESACCESSORIES
1.5% accuracy, black steel case,
acrylic crystal, black aluminum pointer,
1/4" lower mount.
DVC GL115 - 0-30 PSI, 1 1/2" Face • .5 lb.
DVC GL120 - 0-60 PSI, 1 1/2" Face • .5 lb.
DVC GL320 - 0-30 PSI, 2 1/2" Face • .5 lb.
DVC GL325 - 0-60 PSI, 2 1/2" Face • .5 lb.
DVC GL330 - 0-100 PSI, 2 1/2" Face • .5 lb.
DVC GL335 - 0-160 PSI, 2 1/2" Face • .5 lb.
DVC GL340 - 0-200 PSI, 2 1/2" Face • .5 lb.
DVC GL345 - 0-300 PSI, 2 1/2" Face • .5 lb.
DVC GL350 - 0-600 PSI, 2 1/2" Face • .5 lb.
Magnifiers
OPTIVISOR
Optical glass,
binocular-magnifier. Lightweight,
durable with
adjustable headband. Supplied
with #10 lens
plate which magnifies 31/2X at a focal length
of 4". Optional OptiLoupe available to increase
to 2-1/2X the power.
DON DA10 - Optivisor • .75 lb.
DON LP1 - OptiLoupe
GG SERIES GLYCERIN-FILLED GAUGE
SILICONE-FILLED PRESSURE GAUGE
Designed for use with air, gas, oil
and water. Brass movement,
phosphor bronze Bourdon tube,
black enameled aluminum pointer,
white background dial, acrylic
window. 2 1/2" face. Stem size
1/4" NPT connection and U-clamp.
• Silicone-filled gauge
• Stainless Steel Case
• 2 1/2" Face
• 1/4" NPT (M) Fitting
• Bronze Bourdon Tube
• Dual Scale Dial
• Brass Stem
• Clear Acrylic Lens
PSI
Hypro Model
WT.
0-60
0-100
0-160
0-200
0-300
0-400
0-600
0-1000
0-1500
0-2000
0-3000
0-5000
0-6000
HYP WGG60C
HYP WGG100C
HYP WGG160C
HYP WGG200C
HYP WGG300C
HYP WGG400C
HYP WGG600C
HYP WGG1000C
HYP WGG1500C
HYP WGG2000C
HYP WGG3000C
HYP WGG5000C
HYP WGG6000C
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
NEW
La CroSSe
WIRELESS TEMPERATURE STATION
LAC WS-9080U-IT
LAC TX29U-IT - additional sensor
WATER SENSITIVE PAPER
Folding pocket magnifier with multiple
lens in plastic case. This dual lens model
produces three magnifying strengths:
4X, 5X and 9X.
DON P949
Double lenses mounted in
chrome plated case. 23mm lens,
10X magnification.
DON V309-23
SPRAYER CALIBRATION
CONTAINER
2 Liter capacity
SSC CP24034A-PP
These specialty coated papers are used for evaluating distributions, swath widths, droplet densities and penetration of
spray into the crop canopy.
Water sensitive paper is yellow and stains blue when
exposed to aqueous spray
droplets. For information on
water sensitive paper ask for
information sheet 20367.
INCIDE OUT SPRAY TANK CLEANER
Liquid spray tank cleaner formulated to emulsify pesticide
residues and bond them to the rinse solution for a more
thorough cleanout of residues from sprayer systems.
• Manufacturer approved
• Eliminates unwanted pesticide residues from sprayer system
• Reduces the risk of damage to non-target plants
• Won't clog nozzles or damage pumps like dry tank cleaners
• Low use rate
• Convenient to use packaging
PLI 434-32
WT.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
La CroSSe
WIRELESS RAIN CENTER
NEW
Self-emptying rain bucket - empties via internal
tilting cups. Measures total rainfall, and past 24
hours rainfall. Light-heavy rainfall indicator
icons and rain alarm. Transmits up to 330'.
LAC WS-9004U-IT
La CroSSe
HANDHELD ANEMOMETER
MEASURES WIND SPEED
Registers maximum and average
wind speed. Displays wind chill
and temperature in °F or °C. Will
show wind speed of .44 mph to
67 mph. Back lit with battery
sa v i n g a u t o o ff . N e c k b a n d
i n cluded.
Water Sensitive Paper
Part No.
SSC 20301-1N
SSC 20301-2N
SSC 20301-3N
Paper Size
Package
3"X1"
3"X2"
20"X1"
50 cards
50 cards
25 strips
LAC EA-3010
NEW
NEW
Avoid over and under
application of chemicals
TEEJET® TIP CLEANING
BRUSH
SSC CP20016-NY
Hypro Model
HYP 2640-0009
HYP 2640-0010
HYP 2640-0011
HYP 2640-0007
HYP 2640-0008
HYP 2640-0001
HYP 2640-0002
HYP 2640-0003
HYP 2640-0004
HYP 2640-0005
HYP 2640-0014
INSTRUMENTS
CODDINGTON
MAGNIFIER
4
7
14
21
42
70
105
140
210
350
700
Min/max records for temperature with
date/time stamp. Atomic time & date
set automatically. Includes 1 remote
sensor but can receive up to 3.
Wireless outdoor temp. range: -39.8° F
to 157.8° F, Indoor temp. range: 32° F
to 139.8° F. Transmission range: up to
330'. Requires AAA batteries
• 4 oz.
DONEGAN
OPTICAL
MAGNIFIERS
BAR
PSI
0-60
0-100
0-200
0-300
0-600
0-1000
0-1500
0-2000
0-3000
0-5000
0-10000
Accurate flow rate
measurements in seconds!
• Quickly find worn spray nozzle tips - Industry guidelines
recommend tip replacement once flow rate exceeds that of
a new tip by 10%.
• Accurately measure true tip flow rate - Today's high tech
sprayers can only be properly calibrated and confirmed
with this knowledge.
• Fast and simple operation - Readings in 10 seconds or
less per trip.
• Easy to read digital GPM display
SPO 23890 - SC1 Sprayer calibrator • .52 lbs.
- 1 quart container
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
105
SurvivairMax® Series Full Face Respirator
Maximum comfort and reliability
A full face respirator offered in a comfortable,
high grade soft silicone asssembly. The
panoramic polycarbonate lens provides an
unobstructed peripheral view, reducing blind
spots (ratchet-type harness). The unique
tight-seal suspension creates a balanced
and comfortable fit. The bayonet connector
is compatible with the replaceable T Series
cartridges and filters. Ease of maintenance
with its simple disassembly.
ANSI Z87.1-1989 impact, penetration
and optical requirements.
inside
outside
SAF-T-FIT Plus
®
• Foil sealing flange and exhalation valve
• Nose bridge provides the wearer increased
comfort and fit
• Lightweight, humidity-resistant, latex-free
media for lower breathing resistance:
60% improvement in measured fit factors
42% lower exhalation breathing resistance
34% lower inhalation breathing resistance
• NIOSH-approved N95 protection
Supplied with one set (2) of organic vapor
cartridges (T01) and one set (2) of filters (R95)
complete with 2 filter retainers (RP22R).
SET 821000-S - Small facepiece with Tite-Seal Headgear
SET 822000-M - Medium facepiece with Tite-Seal Headgear
SET 823000-L - Large facepiece with Tite-Seal Headgear
SPE 14110428 - M/L
SPE 14110429 - XL
Each weighs 1.5 lbs.
Survivair Opti-Fit™ Full Face Respirator
A full face respirator that provides
excellent visibility. It has a
comfortable, superior fit with a
state-of-the-art replaceable lens.
The nose cup is a standard feature
to prevent fogging, and durable
silicone skirt is comfortable to
wear. NIOSH approved.
Uses T Series cartridges and filters.
SAF-T-FIT® Flat Folds N95
RESPIRATORS
• Economical Mask
• Folds flat for easy storage and transportation
in a pocket
• Individually packaged respirator springs open
for quick donning
• Boomerang Nose seal
• Latex free
• Exhalation valve for exceptional comfort
• NIOSH-approved N95 protection
Supplied with one set (2) of organic vapor
cartridges (T01) and one set (2) of filters (R95)
complete with 2 filter retainers (RP22R).
SPE 14110323 - S
SPE 14110324 - M
SPE 14110325 - L
SET 758000-S - Small Basic Facepiece
SET 768000-M - Medium Basic Facepiece
SET 778000-L - Large Basic Facepiece
Each weighs 1.25 lbs.
Powered air purifying helmet respirator for personal respiratory protection while
spraying. All are battery run up to 4 hours with flip up visors on fiberglass shell
PROF 88 - Self contained
helmet; ideal for growers who are
walking or driving and applying
pesticides. Use in orchard, field
or greenhouse. Fan, batteries and
filters are built into helmet. Comes
with two ZA1/P3 pesticides filters.
SP88 12V power cord for lighting
socket, fan, filters
and batteries.
KAS 0313072 - PROF88 • 4.5 lbs.
KAS 0601047 - Hepa Filter ea.
K80S-T8N - Choose tractor/truck
powered unit (T) or the battery
powered portable unit (G). Similar
units, yet the T helmet is powered
using 12V power cord and the G unit
is powered directly off the portable
battery pack. Both can be worn
with beards and glasses and are
pressurized by positive pressure
with 8 cfm. Comes with two ZA1/P3
pesticide filters,SP88 12V power
cord for lighting socket, fan filter and
batteries.
KAS 0313141 - K80S-T8N(T) • 8.5 lbs.
KAS 0313195 - K80S-T8N(G) • 8.7 lbs.
KAS 0601019 - Hepa Filter ea.
106
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
For superior quality,
safety, fit, comfort and
availability of parts, we
recommend Survivair™
Survivair Premier® Half Mask Respirator
High quality silicone respirator
available in three sizes with soft
sealing flange. Elastic head straps
adjust for easy fit and unobstructed
vision. Low profile nosepiece
allows for compatibility with
eyewear. Perspiration port reduces
facepiece slippage and skin
irritation. Replaceable parts.
Use T Series cartridges and
filters. NIOSH approved.
SET 311000-S - Small • 1 lb.
SET 312000-M - Medium • 1 lb.
SET 313000-L - Large • 1 lb.
Survivair VALUAIR® Plus Half Mask Respirator
RESPIRATORS
For limited life applications
without sacrificing comfort and fit.
The thermoplastic elastomer
facepiece reduces cost while
giving you a soft sealing flange
and forward angled nosepiece
to accommodate eyewear.
It has simple, easy to adjust
sliding suspension. Replaceable
parts. Use T Series cartridges
and filters.
NIOSH approved.
SET 301000-S - Small • 1 lb.
SET 302000-M - Medium • 1 lb.
SET 303000-L - Large • 1 lb.
ALL RESPIRATORS REQUIRE A SET (2) OF CARTRIDGES & A SET (2) OF FILTERS
retainer
filter
cartridge
Cartridges:
Filters:
• The organic vapor cartridges (T01) are
bayonet (1/4 turn) mounted to the
respirator
• The cartridge should be replaced when
no-longer servicable as determined by
the owner and/or supervisor, or an
OSHA change schedule, or earlier if a
contaminant is detected by smell, taste,
irritation or if there is damage to the
cartridge.
• Always replace cartridges in pairs
• Store cartridges in a sealed
containment device (bag) to insure
longer cartridge use.
• NIOSH approved
• Filters (R95) are mounted to the
cartridge using a filter retainer
(RP22R)
• The filter should be replaced when
no longer servicable as determined
by the owner and/or supervisor or
when damaged, soiled, contaminated
with water, or causing increased
breathing resistance and discomfort.
• Filter replacement is normally twice
as frequent as the cartridge.
• NIOSH approved.
SPE T100100 - cartridge (T01)
SPE 14900975 - retainer (RP22R)
Sight Savers®
SPE T117010 - filter (R95)
Anti-fog formula
pre-moistened
tissues for
non-coated lenses.
Cleans glass and
plastic. Anti-static.
Contains silicone.
Not for use with
contact or coated
lenses.
Sold individually
or by the box (100).
Packet contains
one tissue each.
SPE 981808
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
107
A70® Coveralls
Disposable Protective
Apparel
A polyethelene-coated
fabric. Lightweight and
resistant to many waterbased liquids, greases, oils,
liquid splashes and sprays.
CA approved for protection
in pesticide applications.
Use when warning label
reads “chemical resistant
garment when spraying or
mixing is required by label”.
Liquid-resistant extra long
zipper and taped storm
flap. Made with NFPA 99
compliant antistatic
material; includes coveralls
with hood. Yellow.
HOOD
KIM K4509812 - Medium
KIM K4509813 - Large
KIM K4509814 - XLarge
KIM K4509815 - XXLarge
Coveralls
Lightweight, breathable fabric
that is strong and abrasion
resistant for extended wear.
Good protection against dry
particulates and light liquid
sprays. Ideal for general
maintenance, cleanup,
food processing and dusty
environments. Not normally
used for spraying. Zipper front
style, no hood. 24 per case.
Also sold individually. White.
NO HOOD
KIM 49002 - Medium
KIM 49003 - Large
KIM 49004 - XLarge
KIM 49005 - XXLarge
Select Coveralls
PERSONAL PROTECTION
A strong and breathable
3-layer fabric designed to
offer protection against fine
dusts, fibers and low surface
liquid splashes. CA approved
for pesticide application
garment. Ideal for painting,
spraying, maintenance, and
handling grease and oils.
Denim Blue, 24 per case.
Zipper front, elastic back,
wrists and ankles.
NO HOOD
KIM 58502 - Medium
KIM 58503 - Large
KIM 58504 - XLarge
KIM 58505 - XXLarge
Hood
HOOD
KIM 58512 - Medium
KIM 58513 - Large
KIM 58514 - XLarge
KIM 58515 - XXLarge
Alpha Size
Numerical Size
Jackets Chest
No Hood
Small
36-38
Medium
36-38
Large
36-38
XLarge
36-38
XXLarge
36-38
44
48
52
58
60
Sleeve
27
28
29
30
31
Length
30
30
30
30
30
Overalls Waist
and
Inseam
Pants
36
38
42
46
48
28
29
30
32
32
Classic Rainwear
Yellow classic rainwear constructed
of .35 mm PVC. It has welded
NEW
seams, storm flap over snap front
closure, detachable drawstring hood,
take-up-snap wrists, ankles and waist.
Finished with a rounded collar, raglan
sleeves, cape ventilated back with 3
mesh holes, and two pockets. Excellent
value and very versatile. Choose size
when ordering: M, L, XL, XXL
RIV 2403-(size) - 3 piece suit
108
Note: If pesticide warning label reads "coveralls required" KleenGuard
or Kleenguard Select are acceptable. If warning label reads "chemical
resistant garment required" Repel is the fabric to use.Special Note: For
blood borne pathogen rated garments use KleenGuard Ultra, available
by special order only. Other styles and garments available by special
order.
Lined Protective Clothing
Heavy duty lined Yellow PVC
stretch outer fabric is bonded to
a lightweight liner for comfort.
Lasts and lasts! Washable.
Hooded jacket with storm flap
Sizes: M, L, XL, XXL
EDM 65-550
Yellow jacket with velvet collar
Sizes: M, L, XL, XXL
EDM 65-560
Bib Overalls
Sizes: S, M, L, XL, XXL
EDM 65-555
Hood (snaps to jacket with
velvet collar)
One size
EDM 65-561
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
High Performance Muff
Provides excellent full spectrum
attenuation as well as superb low
noise reduction. It comes with a
fork type headband for even
distribution of pressure with a soft
padded head cusion for the highest
degree of comfort. It has improved
balance and extra deep ear cups.
Tests 29 dB NRR.
NEW
NEW
AM/FM Stereo
Radio Earmuffs
Our AM/FM radio with
MP3 connection features
superior radio sound
quality with a noise
reduction rating of 23 dB.
This new model has an
improved lightweight
design and comfortable
adjustable headband.
The automatic shut-off
feature extends the life
of the batteries.
ELV HB-650
ValueMuff™
A basic ear muff at a very
reasonable price that is
comfortable, great looking with
a noise reduction rating of 25 dB.
It has soft and pliable SuperSeal
ear cusions with a solid, durable
headband.
Professional grade.
Comes with 2 AA batteries.
Give your ears a treat!
Add music to your day!
SPE RWS-53005
• 11 oz.
ELV HB-25
• 8 oz.
• 20 oz.
Millennia™
Lightweight nylon frame with good side and
brow protection. It comes with a high impact
wrap-around lens that has a scratch-resistant
hardcoat. Adjustable break-away flexicord
included. Meets ANSI Z87 code. 1 oz..
XTS™
SPE 11150750 - Clear lens
SPE 11150751 - TSR gray lens (shown)
SPE 11150754 - Silver mirror lens
11150751
NEW
Xenon™
SG-14C
SG-14G
Lightweight stylish safety glass with a rubber
nose bridge and colorful rubber inserts at
temples. A good looking pair of glasses.
Tested to ANSI Z87.1-2003. 0.8 oz.
ELV SG-14B - ice blue
ELV SG-14C - clear
ELV SG-14G - gray
ELV SG-14M - flash mirror
ELV SG-24-I/O - indoor/outdoor
ELV SG-24M - silver coated
Bifocals
Combining a safety glass as a safety
reader is a brilliant idea, and these
are some of the best out there.
Comfortable with a soft rubber nose
bridge and temple inserts, these
bifocals are available in three lens
variations in a golden brown frame.
ANSI Z87.1 compliant. 1.2 oz.
Visionaire® Goggle
High performance goggle
with polycarbonate lens with
inside anti-fog treatment, four
ventilation slots, extra wide strap
- all with a comfortable
fit. Meets ANSI Z87 safety
EYE/EAR PROTECTION
Our Extraterrestrial (XTS)
safety glasses with an
updated design, great fit
and coverage is Ballistic
Vo rated and complies
with ANSI Z87.1-2003.
Anti-slip rubber temple
tips and a choice of
frame colors. 99%
coverage against UV
light. Hardcoat PC lens.
A best seller and a top
of the line safety glass.
1 oz.
standards.
ELV RX-350C-1.5 - Bifocal strength
ELV RX-350C-2.0 - Bifocal strength
ELV RX-350C-2.5 - Bifocal strength
ELV GG-30-AF • goggle
ELV RL-30-AF • replaceable lens
NEW
Disposable Ear Pods
Ear Pods
One of our customers found these for us! Much improved
over the others, these fit so comfortably; smooth and
ergonomic pods fit in the ear for maximum protection.
The band design prevents ear pods from touching dirty
or contaminated surfaces when set down. NRR 27 dB
SPE QB1HYG - band
SPE QB100HYG - replacement pods
NEW
CA foam plug that is easy to use and provides
excellent attenuation is visually easy to
monitor with multi-lingual packaging. They
are easy to insert correctly with a tapered
shape and slow expansion rate. Preserve
your hearing! Rated NRR of 32 dB.
ELV EP-201 - Box, 200 pair
ELV EP-211 -
Box-corded, 100 pair
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
109
WorK gloves
WarM gloves
Lined Pigskin Gloves
Leather Palm Gloves
Open cuff KCO 1927.. Innovators of
“The Original" lined grain pigskin
leather, this glove has a trademarked
material back and cuff with the warmth
of a Heatkeep™ lining.
Choose Men’s M, L, XL
Strong, grain pigskin leather and
rubberized cuff mark the features
of a remarkable all-purpose glove.
Leather dries soft. Unlined.
Choose Men’s S, M, L, XL – Unlined
KCO 1917
KCO 1927 - Lined
Leather with Knit Wrist
Lined Knit Wrist Gloves
The same glove as above, but with a knit
wrist. BEST GLOVE OUT THERE!
Choose S, M, L, XL - Unlined
Just like glove mentioned above, but
with a comfortable knit wrist. Keep
your hands warm and dry. Compared
to cowhide, pigskin will stand up to
twice the abrasion and wear.
Choose Men’s S, M, L, XL
KCO 1917KW
Golden Knit
KCO 1927KW - Lined
A durable working glove with PVC
webbing on palm and back with
reversible thumb.
Choose Men’s S, M, L, XL.
High Visibility Gloves
Wa r m , g r a i n p i g s ki n g l o v e w i th
w a te r p r o o f i n sert. Triple layers
protect against cold and wet.
3M Scotchlite™ Reflective Material with
knitted cuff. Choose Men’s M, L, XL
KCO 1939KWP
PVC Gloves
Lined Pigskin Gloves
Heatkeep® lined pigskin grain/suede
gloves are great for wind protection.
Snug knit wrist, keystone thumb.
Choose Men’s S, M, L, XL
KCO 94HK
Long 18" smooth PVC gloves with cotton
interlock lining. Black in Men’s Large only.
The long gauntlet provides added
protection.
KCO 7388
PVC Gloves
Long 14" gauntlet non-slip PVC gloves
with a thermal foam lining. Fluorescent
orange in Men’s Large only, useful working
with high temperature liquid.
Thermal Gripping Gloves
Thermal lined gripping gloves – great for
picking up wet materials, fall cleanup
and other damp working conditions. Has
a sure-grip palm with breathable back.
100% acrylic knitted shell, Latex coated
palm. Fantastic glove.
GLOVES
KCO 1778
Choose Men’s S, M, L, XL
KCO 4184
Edmont Gloves
Nitrile Gloves
Embossed, straight cuff, chemical & solvent
resistant gloves. Unlined. Available in 2 lengths.
KCO 1790
13" gloves 15 mils thick in Men’s XS, S, M, L, XL
Choose Women’s S, M
EDM 37-155
KCO 1790W
18" gloves 22 mils thick in Men’s S, M, L, XL
EDM 37-185
Winter Work Gloves by Edmont
Monkey Grip Gloves
Raised finish red fluorescent vinyl coated
gloves with knit cuff. Non-woven insulate
lining. Good safety and high visibility
glove. Size 10 only.
Raised finish winter vinyl coated gloves with
safety cuff. Non-woven insulated lining.
For yard and field work; snow and water
resistant. Size 10 only.
EDM 523-471
EDM 523-173
Golden Grab-It Gloves
Disposable Nitrile Gloves
Lightly powdered, rolled cuff disposable Nitrile
gloves four mils thick, 9 1/2" long. Nitrile is chemical
resistant, gives better protection against puncture
and abrasions than PVC or polyethylene gloves.
Packed 100 gloves in a dispenser box. Fits either
hand. Choose S, M, L, XL.
Premium coated crinkle finish
general purpose work gloves.
Cut resistant. Size 10 only.
EDM 16-347
KCO 2350
110
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
NEW
West County Gardener provides high quality gloves
and relies on fewer non-renewable resources. Every
pair of West County gloves removes one large plastic
water bottle from the landfill, saves energy and
produces at least 40% less CO2.
Bamboo Gloves
Terrific new bamboo gloves with Latex coated palm and
fingers and threaded color bamboo knit shell. Snug elastic
knit wrist, comfortable and environmentally friendly.
Classic Gloves
Made from high-tech recycled
materials, but has a more
luxurious look and feel.
Attributes: a long cuff,
adjustable wrist, comfortable,
breathable, and durable.
Women’s sizes.
WCG 074S - Slate
WCG 074B - Berry
XS, S, M, L, XL
Men's
Women's
KCO 1781 - M, L, XL • olive green
KCO 1781W - S, M, L • purple
Nitrile Gloves
XS, S, M, L, XL
Nylon, breathable knitted shell with smooth finish and Nitrile
coated palm and fingers. Excellent for garden planting and
weeding. Form fitting and washable.
Landscape Gloves
Kevlar ™ reinforcements
with dense foam padded palm
insert for shock absorption.
Flexible compressed Neoprene
knuckle protection. Gripper dots
on palm for better grasp.
WCG 043 - Women’s Stem S, M, L,
WCG 048 - Men’s Charcoal or Stem M, L, XL
KCO 1891- S, M, L
Women’s purple and rose
KCO 1890 - S, M, L, XL
Men’s navy blue
Lightweight Gripping Gloves
Rose Gloves
Full elbow length gloves
with reinforced fingers &
palm, and lightly padded
palm. Made of 100% synthetic
suede, lightweight, breathable
and washable.
Unisex sizes.
WCG 054R - Ruby XS, S, M, L, XL
WCG 054M - Moss XS, S, M, L, XL
Breathable, gray poly/cotton knitted
shell with blue latex coated palm.
Comfortable elastic knit wrist and a
great choice when you need a lighter
weight glove. Washable.
KCO 1791 - S, M, L, XL
••••••KIDS • KIDS • KIDS••••••
Lined Work Gloves
Waterproof Gloves
WCG 015 - Women’s Black S, M, L, XL
WCG 018 - Men’s Black S, M, L, XL
Lined soft ultra suede palm material and
trademark striped back. Knit wrist and warm,
fleecy lining for cold weather.
KCO 1927KWC - Ages 3-6
KCO 1927KWY - Ages 7-12
NEW
GLOVES
Vo t e d t h e B e s t o v e r a l l
w a t e r p r o o f glove by the
Wall Street Journal, this glove
is made with a spandex mesh
back using 95% recycled
materials. It is perfect for
use in cold, wet weather.
Lined Mittens
Soft and durable ultra suede mitten with warm
fleecy lining for cold weather. Shirred elastic
wrist for a snug fit. Adorable!
KCO 1930C - Ages 3-6
NEW
Work Gloves
Durable with padded palm
4-way stretch nylon back,
reinforced stress points and
a terry cloth brow wipe. Very
versatile and an all around
favorite. Now made with 95%
recycled materials.
WCG 014 - Women’s Iris or Teal XS, S, M, L
WCG 019 - Men’s Charcoal L, M, XL, XXL
Choose color and size when ordering
Cowhide Leather Palm Gloves
Gray cowhide leather palm with rubberized safety
cuff and wing thumb. Terrific first work glove!
KCO 1500C - Ages 3-6
KCO 1500Y - Ages 7-12
Latex Dipped Gloves
Green latex palm and fingers with comfortable
cotton shell. Get the kids planting and keep their
hands clean!
KCO 1785C - Ages 3-6
KCO 1785Y - Ages 7-12
BERRY
BLACK CHARCOAL
GOLD
IRIS
MOSS
RUBY
SLATE
STEM
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
111
The BugBand Wristband
Protects you from mosquitoes, flies, gnats, no-see-ums and ticks. Wear it on
your wrist, ankle, baby stroller, belt loop, etc. Don’t leave it behind when going
to an outdoor event! Contains Geraniol (oil extracted from geranium oil) is water
resistant and DEET free; works up to 120 hours, is packaged in reusable plastic
pod, and comes in multiple colors. 0.6 oz.
BUG 88207 – blue
Buzz Off Insect Shield
Water Paisley
Rose Butterfly
NEW
BUG 88205 – green
BUG 88202 – pink
BUG 88203 – red
BUG 88204 – yellow
Binds permethrin (a manmade version of the natural
insect repellent found in
chrysanthemums) tightly
to fabric fibers, resulting
in effective, odorless insect
protection. Our bandana’s
have been very popular and
are available in 3 great colors.
Good for at least 25 washings, it will keep
mosquitoes and pesky gnats at bay. EPA
registered. Quit going through the torture! 2.3 oz.
NEW
BugBand Pump Spray
Mists Geraniol vapors that form a protective
barrier to deter blood-sucking insects from biting. Use
once for hours of insect protection.
BUG 88336 – Spray lotion • 6 oz.
Garden Check
BUZ 3353-0335 BUZ 3353-0334 BUZ 3353-0336
NEW
YakTrax Pro
Waterproof LED Flashlight
Waterproof and also shock resistant. It has
7 bright LED bulbs with 3 functions: Low
beam, high beam, and flashing beam of light.
Uses three AAA batteries (not included).
Includes wrist band.
HEAD TO TOE PROTECTION
BTB FL3031WS-B
Heavy duty rust resistant steel coils provide forward and backward stability while you navigate ice and snow conditions. Easy
on and off, lightweight, durable and flexible. Adjustable strap
helps to keep it in place. Work confidently on packed snow and
ice with the Pro! Black. 5.5 oz.
Shoe size
- Flashlight • 2.7 oz.
YAK PB-S - Small Men's 5-8.5 / Women's 6.5-10
YAK PB-M - Medium Men's 9-11 / Women's 10.5-12.5
YAK PB-L - Large Men's 11.5-13.5 / Women's 13-15
Hard maple brush mounts
with two side brushes of
soft poly and two bottom
brushes of stiff poly. 5
year warranty on black
steel frames. Leave the
dirt and mud outdoors.
SCR H1 – Original Scrusher • 4 lbs.
Traction 360®
Original Scrusher mounted to tubing to fit 2” hitch receiver. 17”x6”x10”
SCR H1RH – Tailgate Scrusher 8 lbs.
HAND & TOE WARMERS
All day, air activated, time released,
disposable hand and toe warming packs.
Each soft, lightweight pouch contains a
mixture of iron powder, water, vermiculite,
cellulose, activated carbon and salt.
Oxidation causes a safe, natural reaction
to release heat. Keep in zip-seal polybag
to preserve for days. Warms in minutes.
Biodegradable. Keep your hands and
toes warm!!
OCC 1100-80D - Hand warmers,
Quantity of 5 pair per pack
OCC 1106-40D - Toe warmers,
Quantity 1 pair per pack
112
Walk confidently on wet and
NEW
greasy floors with 360° of
traction! The patented non-slip
design works in extreme temperatures.
Keep in mind that according to the
National Safety Council, the average
cost per slip/fall accident was $20,228
last year. Save yourself from the grief
of injury while still wearing your favorite
footwear.
Shoe size
YAK 08500-S - Men's 6-7.5 / Women's 7.5 - 9
YAK 08501-M - Men's 8-10 / Women's 9.5-11.5
YAK 08502-L - Men's 10.5-12 / Women's 12-13.5
Native Plants of the Northeast
A fabulous guide for gardening and conservation.
With entries for nearly 700 species of native
trees, shrubs, vines, ferns, grasses, and
wildflowers from the northeastern quarter of the
U.S. and eastern Canada, its comprehensive
horticultural coverage is unsurpassed by any
other single volume. By Donald Leopold
BOK 682673 – Native Plants of the NE • 2.8 lbs.
NEW
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement