Sena 20S Motorcycle Bluetooth Communication System User's Guide

Below you will find brief information for 20S 20S. The 20S Bluetooth headset allows you to make hands-free calls on your Bluetooth mobile phone, listen to stereo music or voice instructions from GPS navigation systems wirelessly via Bluetooth, and have full-duplex intercom conversations with a passenger or other motorcycle riders. It supports multi-way intercom for up to 8 connections and Universal Intercom for intercom conversations with other Bluetooth headsets from different brands.

PDF Download
Document
Sena 20S User's Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Bluetooth 4.1
  • Dual Bluetooth module communication system
  • Audio Multitasking
  • Multi-way intercom up to 8 connections
  • Bluetooth intercom up to 2 km (1.2 miles)
  • Universal Intercom
  • Advanced Noise Control
  • Intuitive voice prompts and commands
  • HD sound quality
  • Bluetooth Audio Recording

Frequently asked questions

Turn on the 20S and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. You will hear a voice prompt saying “Phone pairing”. Search for Bluetooth devices on the mobile phone and select the Sena 20S from the list of detected devices. Enter 0000 for the PIN if asked.

You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level.

When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. To answer the phone call and stop the intercom conversation, tap the Jog Dial or the Phone Button. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep.

The 20S comes with a static boom microphone, but also includes a wired boom microphone and a wired microphone that can be used according to the helmet type.

You can check the battery level by looking at the LED indicator when the headset is powering on or by using the voice prompt indicator by pressing and holding the Jog Dial and Phone Button simultaneously for 3 seconds until you hear three, high toned beeps.

To enter the voice speed dial menu, double tap the Phone Button. You can then navigate through the menu using the Jog Dial to select the desired option and tap the Phone Button to confirm.
Preparing document for printing…
0%