Ice-O-Matic ICE0406HA Item#:147 ICE0400/0405/0406 - Cube Ice Maker ice. Pure and simple •Only 30" (762 mm) wide. •Produces up to 529 lbs (240 kg) of ice per day. •Harvest Assist provides consistent ice production for the life of the ice maker while reducing energy consumption and increasing capacity. •Pure Ice® exclusively by Ice-O-Matic. Built-in antimicrobial protection for the life of the ice maker inhibits bacteria growth on ice maker surfaces. Ice-O-Matic's optional water filtration system provides protection against unpleasant tastes, odors and scale formation. •Durable, electroless nickel plating on all evaporator plates ensures reliability. •Longest warranty in the industry. Purchase an Ice-O-Matic water filter with your cube ice maker, replace the filter every six months, and the evaporator warranty is extended to 7 years parts and labor (available in the U.S. and Canada only). •Constructed from corrosion-resistant stainless steel and fingerprint-proof plastic. •Free factory-installed optional Top Air Discharge available for maximum ice production in a small space. ICE0406 on B55 Ice Maker Warranty Options & Accessories Every Ice-O-Matic ice maker is backed by a warranty that provides both parts and labor coverage. water filters Manifold Ice Machine Model Inline •Three years Parts and Labor. System Replacement System IFQ1 IOMQ (1) IFI4C / IFI8C •Five years Parts coverage on the evaporator and compressor. ICE0400 ICE0405 ICE0406 Ice Form •Seven years Parts and Labor on the evaporator when you purchase an Ice-O-Matic water filter with your cube ice maker and replace the filter every six months (available in the U.S. and Canada only). Bin Chart Kits for Combining Wider Bins with Smaller Models Ice Storage Bins Model No. Capacity Width Kits C UB E Full Cube Dimensions ICE0405 Half Cube Dimensions ICE0406 W x D x H (in.) 3/8 x 7/8 x 7/8 W x D x H (mm) 10 x 22 x 22 Bush Site Content B40 344 lbs (156 kg) 30 in (762 mm) B42 351 lbs (160 kg) 22 in (559 mm) B55 510 lbs (232 kg) 30 in (762 mm) B70-30 741 lbs (337 kg) 30 in (762 mm) B90-30 1023 lbs (465 kg) 30 in (762 mm) B100 854 lbs (388 kg) 48 in (1219 mm) B120 1142 lbs (519 kg) 48 in (1219 mm) B150 1447 lbs (658 kg) 60 in (1524 mm) B170 1807 lbs (821 kg) 60 in (1524 mm) ICE0400 7/8 x 7/8 x 7/8 22 x 22 x 22 W x D x H (in.) W x D x H (mm) B25 242 lbs (110 kg) 30 in (762 mm) Kit Not Required N/A Kit Not Required KBT 5 Hold Down Securement Recommended *See Ice-O-Matic Price List for Adapter Kits to combine ice makers with most available ice/beverage dispensers. Bush Refrigeration Page: 660 ICE0400/0405/0406 Cube Ice Maker Features Ice-O-Matic ICE0406HA Item#:147 ICE0400/0405/0406 - Cube Ice Maker ice. Pure and simple Air Cooled B. Optional Top Discharge– No Side Clearance Required .62" (16mm) Standard Side Discharge 2.6" (67 mm) 5" (127mm) .7" (18 mm) Bin Straps 5" (127mm) Bin Straps Air In– Rear 14.5" (368 mm) A.Ice maker potable water in, 3⁄8" FPT. B.Ice maker water out, 3⁄4" FPT. C.Hole for electrical connections, 7⁄8". D.Electrical connection junction box. 11.7" (297 mm) Air Cooled 20.0" (508 mm) 24.25" (616 24 mm) Water Cooled A. Ice maker potable water in, 3⁄8" FPT. B.Ice maker water out, 3⁄4" FPT. C.Hole for electrical connections, 7⁄8". D. Electrical connection junction box. E. Condenser water in, 3⁄8" FPT. F. Condenser water out, 1⁄2" FPT. E. B. 6.45" (164 mm) 2.6"(67 mm) 5" (127 mm) Bin Straps 7.73" (196 mm) 10.73" (273 mm) Operating Requirements .79"(20 mm) 5" (127 mm) Bin Straps Water Cooled Dimensions Minimum Ambient Temp. Range Air 50˚F (10˚C) Water Temp. 40˚F (4.4˚C) All models Maximum 60 Hz 50Hz 100˚F (38˚C) 110˚F (43˚C) 20 PSIG (1.4 BAR) Water Pressure F. 14.49" (368 mm) D. C. A. 30.13" (765 mm) 11.7" (297 mm) ICE0400/0405/0406 Cube Ice Maker D. C. A. Please note: air-cooled units require 6" (152 mm) clearance for air intake and exhaust. 60 PSIG (4.1 BAR) W x D x H (in.) 30.13 x 24.25 x 20.00 W x D x H (mm) 765 x 616 x 508 Specifications Ice Production per 24hrs Water Usage gallons per 100 lbs of Ice 90°F air/70°F water 90°F air/ 70°F water lbs (kg) Potable Condenser kWH Used per 100 lbs of ice @ 90°F air/ 70°F water Model Number Cond. Unit 70°F air/ 50°F water lbs (kg) ICE0400A Air 505 (230) 368 (167) 24.4 - 6.1 ICE0400W Water 496 (225) 407 (185) 28.8 148 4.6 ICE0400T Top Air 499 (227) 357 (162) 25.0 ICE0406A Air 529 (240) 358 (162) 24.0 ICE0406W Water 523 (238) 439 (200) 28.9 132 4.2 ICE0405A Air 498 (226) 366 (166) 22.7 - 6.0 ICE0405W Water 525 (239) 440 (200) 26.5 166 4.7 Notes: Number of Wires: Approx. Shipping Weight lbs (kg): Refrigerant Type: - 115/60/1 6.3 5.95 Min. Circuit Ampacity 230/50/1 Approx. BTUs per hour 17.1 7,835 12.9 7,563 17.1 208-230/60/1 Fuse Size 15 7,757 8.0 7,523 6.4 7,770 8.2 6.2 16 7,735 8,213 3 (including ground) ICE0400A 165 (75) • ICE0400W 165 (75) • ICE0400T 165 (75) • ICE0406A 165 (75) • ICE0406W 165 (75) • ICE0405A 165 (75) • ICE0405W 165 (75) R404A 11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: 303. 371. 6296 • www.iceomatic.com Bush Site Content Voltage Characteristics Bush Refrigeration Rev:06/13 Part:1005 Page: 661 Ice-O-Matic B55PS Item#:147 Storage Bins Ice. Pure and Simple •Application storage capacity from 242 lbs (110 kg) to 1807 lbs (821 kg). •Ultra-low profile — 28" (711 mm) to 66" (1676 mm) tall. •Multiple bin tops provide an easy solution for mounting ice makers on different sized bins. •Polyethylene bin liner is insulated with foam for maximum ice preservation — 1.5" to 3" (38 mm to 76 mm). •Perfect-fit seal for improved ice preservation. •Rugged, fingerprint-proof door. •Built-in ice scoop holders on certain models. •Sturdy leg design — 6" (152 mm) adjustable NSF approved legs — standard. •Durable stainless finish. •Corrosion-proof bin liner. Ordering and Specification Information — Required Bin Top ICE Series™ Cube Ice Makers Pearl Ice Makers Flake Ice Makers Bin Model No. App. Storage Rating ARI Bin Storage lbs (kgs) Approximate Shipping Weight lbs (kgs) 22" (559 mm) wide 30" (762 mm) wide 48" (1219 mm) wide 21" (533 mm) wide 21" (533 mm) wide 42" (1067 mm) wide B25PP* 242 (110) 190 (86) 74 (34) KBT19 << N/A KBT19 KBT19 N/A B40PS 344 (156) 270 (123) 120 (54) KBT19 << N/A KBT19 KBT19 N/A B42PS 351 (160) 275 (125) 128 (58) << N/A N/A KBT24 KBT24 N/A B55PS 510 (232) 400 (182) 148 (67) KBT19 << N/A KBT19 KBT19 N/A B70-30 741 (336) 581 (264) 240 (109) N/A << N/A N/A N/A N/A B70-1506 741 (336) 581 (264) 240 (109) N/A << N/A N/A N/A N/A B90-30 1023 (464) 802 (364) 285 (129) N/A << N/A N/A N/A N/A B90-1506 1023 (464) 802 (364) 285 (129) N/A << N/A N/A N/A N/A B100PS 854 (388) 670 (304) 191 (87) N/A KBT5 << KBT23 KBT23 KBT26 B120SP/SS 1142 (519) 896 (407) 304 (138) N/A <<** KBT44 N/A << << B130SP 1457 (661) 1144 (404) 340 (151) N/A <<** KBT44 N/A << << B150SP/SS 1447 (658) 1135 (515) 338 (153) N/A <<** KBT44 N/A << << B170SP/SS 1807 (821) 1417 (643) 390 (177) N/A <<** KBT44 N/A << << << Kit not required. Hold down securement recommended. Bin Height includes 6" (423 mm) legs. All bins have polyethylene liners. *Rotocast finish **ICE1506 is compatible with B120, B130, B150 and B170 using at KBT43 Bush Site Content Bush Refrigeration Page: 662 Storage Bins Features Ice-O-Matic B55PS Item#:147 Storage Bins Ice. Pure and Simple Dimensions Storage Bins 6 3/4” (172mm) 6 3/4” (172mm) 5 1/4” (133mm) B25 Rear Bin Drain 3/4” (19mm) F.P.T. 15” (381mm) 31” (787mm) 22” (559mm) 30” (762mm) 31 1/2” 37 1/2” (800mm) (953mm) B40 28” (711mm) 15” Rear Bin (381mm) Drain 3/4” (19mm) F.P.T. 6” (152mm) to 7” (178mm) Adjustable Legs 11” Rear Bin (279mm) Drain 3/4” (19mm) F.P.T. 6” (152mm) to 7” (178mm) Adjustable Legs 30” (762mm) 31” (787mm) 50” 44” (1270mm) (1118mm) B42 B55 Rear Bin Drain 3/4” (19mm) F.P.T. 31” (787mm) 6” (152mm) to 7” (178mm) Adjustable Legs 22” (559mm) 50” 44” (1270mm) (1118mm) 15” (381mm) 30” (762mm) 31” (787mm) 6” (152mm) to 7” (178mm) Adjustable Legs 6 3/4” (172mm) B100 Rear Bin Drain 3/4” (19mm) F.P.T. 24” (610mm) 31” (787mm) 34” (864mm) 30” (762mm) 13” (330mm) 48” (1219mm) 34” (864mm) IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin 13” (330mm) 34” (864mm) 60” (1524mm) 14 1/2” (368mm) IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin 13” (330mm) 34” (864mm) 60” (1524mm) 23 1/2” (597mm) KBT19 Bin Top for 30” (762mm) bins with 22” (559mm) ICE Series Cube Ice Makers GEM Series Ice Makers & MFI Series Ice Makers 24” (610mm) 66” (1676mm) 54” (1372mm) 14 1/2” (368mm) 48” 30” (762mm) (1219mm) 48” (1219mm) KBT5 Bin Top for 48” (1219mm) bins with (1) 30” (762mm) wide ICE Series Cube Ice Maker & MFI Series Ice Makers 30” (762mm) B170 23 1/2” (597mm) 48” (1219mm) 11” (279mm) 11” Typ (279mm) 54” (1372mm) 14 1/2” (368mm) KBT23 Bin Top for 48” (1219mm) bins with (1) 21” (533mm) wide GEM Series Ice Makers 78” (1981mm) 14 1/4” (362mm) IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin 11” (279mm) B150 34” (864mm) B90 58” (1473mm) 14 1/4” (362mm) IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin 6” (152mm) to 7” (178mm) Adjustable Legs 48” (1219mm) B120 IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin B70 50” 44” (1270mm) (1118mm) 24” (610mm) 48” (1219mm) KBT22 Bin Top for 48” (1219mm) bins with (2) 21” (533mm) wide GEM Series Ice Makers & MFI Series Ice Makers 23 1/2” (597mm) 22” (559mm) KBT24 Bin Top for 22” (559mm) bins with (1) 21” (533mm) wide GEM Series Ice Maker 24” (610mm) 48” (1219mm) KBT26 Bin Top for 48” (1219mm) bins with (1) 42” (1067mm) wide MFI2406 Ice Maker NOTES: Approx. Shipping Weight lbs (kg): B100 191 (87 kg) • B120 304 (138 kg) • B130 334 (152 kg) • B150 338 (153 kg) • B170 390 (177 kg) B25 95 (43 kg) • B40 135 (61 kg) • B42 135 (61 kg) • B55 170 (77 kg) • B70 240 (109 kg) • B90 285 (129 kg) 11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: 303. 371. 6296 • www.iceomatic.com Bush Site Content Bush Refrigeration Rev: 07/12 Part: 3000 Page: 663 Ice-O-Matic IFQ1 Item#:147 WATER FILTERS Ice. Pure and Simple •High–capacity activated carbon filtration makes ice free of taste or odor, and protects equipment against corrosive chlorine. •Patented IsoNet scale inhibiting technology helps protect equipment against scale (lime-scale) and corrosion. •Gradient-density sediment filtration reduces dirt and other suspended particulates as small as 1/2 micron. •Improves ice maker operating efficiency. •Reduces maintenance and extends equipment life. •1/4 turn Quick-Twist cartridge makes changing filters quick and easy. •IFQ1 & IFQ2 are NSF Certified under Standard 42. IFQ SERIES FILTER SYSTEM Model Number Description IFQ1 Single Filter IFQ2 Dual Filter Max.Capacity Flow Rate ICE Maker Capacity lbs (kg) Per Day Max. gpm (lpm) 1000 (454.4) 1.5 (5.7) 2400 (1090.6) Pressure Max. Max. psi Operating Temp °F° (°C) 125 100 (38) Micron Rating Approx. Shipping Weight lbs (kg) 4 (1.8) .5 3.0 (11.4) 8 (3.6) Single Inline Filter Cartridges Model Number Description IFI4C Single Inline Cartridge 1/4” compression IFI8C Single Inline Cartridge 3/8” compression Bush Site Content Max.Capacity Flow Rate ICE Maker Capacity lbs (kg) Per Day Max. gpm (lpm) 600 (272) 1.0 Pressure Max. Max. psi Operating Temp °F° (°C) 100 100 (38) Bush Refrigeration Rating Approx. Shipping Weight 10 2 (.9) Micron lbs (kg) Page: 664 Water filters Features Ice-O-Matic IFQ1 Item#:147 WATER FILTERS Ice. Pure and Simple Water filters IFQ Series Filter Systems IFQ IFQSeries Series Single Inline Filter SINGLE INLINE SINGLE INLINE FILTER FILTER FILTER FILTERSYSTEMS SYSTEMS IFQ1 IFQ2 IFQ1 IFQ2 IFQ1 IFQ2 x 6"W X 4"D 15"H 16"H × ×10"W × ×6"D 15"H× ×6"W 6"W×15"H ×4"D 4"D 16"H 10"W 6"D 16"H x 10"W X 6"D (381 (406 (381mm mm× ×152 152mm mm× ×102 102mm) mm) (406mm mm× ×254 254mm mm× ×102 102mm) mm) IOMQ IFI4C, IFI4C,IFI8C IFI8C IFI4C, IFI8C 11"× ×2.5" 2.5" 12.75" x 4" 11" x 2.5"11" (279 (279mm mm× ×5757mm) mm) Replacement Filter Cartridges REPLACEMENT REPLACEMENT FILTER FILTERCARTRIDGES CARTRIDGES IOMWFRCIOMQ IOMQ 12.75" 12.75"x x4"4" 11" x 2.5" (324 (324mm mm× ×102 102mm) mm) All filter systems include: Filter cartridge with FDA approved scale inhibitor, inlet shut-off valve, gauge and quick-connect fittings. *IOMQ replacement cartridges for use with IFQ1 & IFQ2 manifold filter systems. Filter Sizing Chart Ice-O-Matic Cube Ice Maker Ice-O-Matic Flake Ice Maker Ice-O-Matic Pearl Ice® Maker Recommended Ice-O-Matic Water Filter ICEU070, 150, 220, 226, 300, ICE0250, 0320, 0400, 0406, 0500, 0520, 0606 MFI0500, EF250, EF450 gemu090, gemd270. gemd520, gemd540, gemd790, GEM0450 IFQ1 (Single Manifold cartridge Filter System) IFI4C or IFI8C (Single inline Filter System) ICE0806 MFI0800 GEM0650, 0956 IFQ1 (Single Manifold cartridge Filter System) ICE1006, 1406, 1506, ICE 1806, 2106 MFI0800, MFI2406 GEM1256 IFQ2 (Dual Manifold cartridge Filter System) Extended Warranty Program •Buy a new Ice-O-Matic Water Filter System with a new ICE Series™ Cube ice maker, replace the filter cartridge every 6 months, and Ice-O-Matic will extend the limited cuber evaporator warranty to 7 years parts and labor (U.S. and Canada only). •New ice maker and filter must be installed at the same time. •Ice maker and water filter must be registered with Ice-O-Matic within 10 days of installation. Register ice maker and filter at www.iceomatic.com. •Water filters must be changed every 180 days (6 months), at a minimum. All changes must be registered with Ice-O-Matic and include the water filter’s model and serial numbers. Register water filter changes at www.iceomatic.com. •Program is available with all Ice-O-Matic IFQ1, IFQ2, ifi4c or ifi8c water filter systems. •Replacement filter must be Ice-O-Matic models. 11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: 303. 371. 6296 • www.iceomatic.com Bush Site Content Bush Refrigeration Rev: 04/12 Part: 5000 Page: 665
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021