M700 Compact Single

M700 Compact Single
M700 Compact Single-mode OTDR
The Noyes M700 from AFL Telecommunications is a compact, full
featured, single-mode OTDR that includes an integrated Visual
Fault Locator (VFL), an Optical Power Meter (OPM) displaying up to
three wavelengths simultaneously, and a large transflective touch
screen display suitable for both indoor and outdoor operation.
The M700 OTDR supports Real-Time, Full-Auto, and Expert
(manual) modes, precision event analysis, dual-wavelength
testing, rich file naming, and an intuitive job set-up functionality.
In addition to OTDR event analysis, pass/fail acceptance values,
and marginal warning, specific values can be set to alert the test
operator of failing or marginal events. Using one of the Least
Squares Approximation (LSA) loss methods, events may be added
or deleted manually.
Thousands of OTDR and OPM test results can be stored internally
or on the supplied USB drive, and are transferable via a USB cable
or drive to a computer for viewing, printing and analyzing with
supplied Windows® compatible software. Saved OPM loss values
for a cable in one or two directions can be displayed in a table on
the M700 for evaluation and comparison.
Features
•• 38 / 36 dB dynamic range @ 1310 / 1550 nm
•• Integrated Optical Power Meter (OPM) and Visual Fault Locator
(VFL, 650 nm)
•• LSA Measurements and manual events in Expert mode
•• Pass/Fail Event and Link Thresholds settings
•• OTDR results saved as industry standard (GR-196) .SOR files
•• OPM stores results and displays up to three wavelengths simultaneously
•• Large, high bright, sunlight readable, transflective touchscreen
•• Tool-free, switchable adapters (SC/FC/LC)
•• Integrated fiber launch ring holder
•• 2 USB host ports
•• USB drive and Windows® compatible software included
With short dead zones, a dynamic range of 38 dB, and greater
than 8-hour battery life during continuous testing, the M700 is
perfect for testing optical fibers in service provider metro areas.
Ordering Information
Model
Description
Test Port Adapters
M700-11-0901PR 1310/1550 nm single-mode OTDR SC, FC, and LC *
* ST test port adapter is available (order separately).
Standard accessories include are USB Flash drive, PC software for OTDR trace analysis and OPM Loss
reporting, AC adapter, user guide, soft carry case, 1.25 and 2.5mm universal adapters for VFL and OPM,
SC, FC and LC adapters for the OTDR (ST available, purchased separately).
continued on the next page
© 2008, AFL Telecommunications, all rights reserved. M700-00-2000 Revision 1D, 05. 30. 08
Specifications are subject to change without notice.
1
M700 Compact Single-mode OTDR
Specifications
OTDR Specifications
Power Meter Specifications
Emitter Type
Laser
Safety Class
Class 1 FDA 21 CFR 1040.0 & 1040.11
Center Wavelengths
Dynamic Range (SNR = 1)
Calibrated Wavelengths
850, 980, 1310, 1490, 1550, 1625 nm (displays
up to 3 simultaneously)
1310/1550 nm
Detector Type
Filtered InGaAs detector
38 / 36 dB (1310/1550 nm)
Measurement Range (dBm)
+26 to -50 dBm
4
±0.25
0.9 m
Accuracy
5.5 m
Measurement Units
dB, dBm, mW
5, 10, 30, 100, 300 ns, 1, 3, 10, 20 ms
Wavelength ID 5
Yes
250 m to 256 km
Set Reference
Yes
max. 64,000 points
Data Storage
Yes
270 Hz, 330 Hz, 1 kHz, 2 kHz
Data Point Spacing
0.125 m (range 2 km)
0.25 m (range = 4 km)
0.5 m (range = 8 km)
Range/# of data points (range 16 km)
Tone Detection
Group Index of Refraction (GIR)
1.4000 to 1.6000
Size
27.4 x 19.3 x 7.1 cm (10.8 x 7.6 x 2.8 in)
± (1 + 0.0005% x distance + data point spacing)
Weight
2.3 kg ( 5 lb)
Bellcore GR-196 Version 1.1
Operating Temperature
-10 to +50°C, 0 to 90% RH (non-condensing)
Internal flash memory
Storage Temperature
-20 to +60°C, 0 to 90% RH (non-condensing)
USB flash drive
Power
Rechargeable Li-Ion or AC power adapter
Downloadable from OTDR directly to PC
Battery Life
Event Dead Zone
1
Attenuation Dead Zone
2
Pulse Widths
Range Settings
Distance Sampling Points
Distance Uncertainty (m)
3
Trace File Format
Trace File Storage Media
General Specifications
6
Trace File Storage Capacity
Internal 1000 fibers
Recharge Time
Data Transfer to PC
USB
Display
OTDR Modes
Full Auto, Real Time, Expert
Tool Free adapters
Modular cleanable SC/ST/FC/LC
> 8 hours continuous OTDR testing
7
4 hours
6.5 inch (16.51 cm), color, transflective
4 Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
5 Automatic wavelength identification and switching when used with Noyes Wave
ID Series Light Sources.
6 Typical, depending on display brightness.
7 Typical, from fully discharged to fully charged state, unit may be operating.
All specifications are subject to change.
All specifications valid at 25°C unless otherwise specified.
External battery charger available.
1 Typical distance between the two points 1.5 dB down each side of a reflective
spike caused by a -45 dB event using 5 ns pulse width.
2 Typical distance from event location to point where trace is within 0.5 dB of
backscatter caused by a -45 dB event using 5 ns pulse width.
3 Does not include GIR uncertainty.
Visual Fault Locator Specifications
Emitter Type
Laser
Safety Class
Class II FDA 21 CFR 1040.10 & 1040.11; IEC
825-1:1993, EN60825-1:1994
Model Number
Description
Wavelength
650 nm
FR1-SM-1KM-SC-FC
Fiber Ring SM SC/FC 1000m
Output Power (nominal)
0.8 mw
FR1-SM-1KM-SC-LC
Fiber Ring SM SC/LC 1000m
FR1-SM-1KM-ASC-SC
Fiber Ring SM SC-APC/SC-UPC 1000m
8500-20-0900
Wet Cleaning Kit for SC/FC/ST/LC Connectors
OTDR Fiber Accessories
© 2008, AFL Telecommunications, all rights reserved. M700-00-2000 Revision 1D, 05. 30. 08
Specifications are subject to change without notice.
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement