VDAS - Worldeyecam
PRODUCT SPECIFICATION
VADT/VADR14100WDM SERIES
DIGITALLY ENCODED VIDEO WITH BI-DIRECTIONAL STEREO AUDIO/
2 DATA CHANNELS AND REVERSE SYNC
FEATURES
• 10-Bit Digitally Encoded Video Transmission
• Exceeds RS-250C Short-Haul Transmission
• NTSC, PAL, SECAM Compatible
V
• Full Color Compatibility • NTCIP Compatible
A
• 20-Bit Digitally Encoded Stereo Audio
• 600 Ohm Impedance Line-Level Audio
• No In-field Electrical or Optical Adjustments Required
DESCRIPTION
The IFS VADT/VADR14100WDM series video transceivers
support simultaneous broadcast quality transmission of 10-bit
digitally encoded video, 20-bit digitally encoded stereo audio,
bi-directional data transmission, and Genlock over one single-mode or
multimode optical fiber. The modules are universally compatible with
major CCTV camera manufactures and support RS-232, RS-422, and
2-wire or 4-wire RS-485 data interfaces and all major data protocols.
Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. Each transceiver incorporates status
indicating LED’s for monitoring of proper system operation. The
modules are available in either stand-alone or rack mount versions.
• Reverse Sync for Genlock
• LED Status Indicators For Monitoring All Critical
Operating Parameters
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
D
S
APPLICATION EXAMPLES
• Tested and Certified by an Independent Testing Laboratory
for Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Distance Learning CCTV with PTZ Control & 2-way Audio
Communications
• Distances up to 43 Miles (69 km)
• ITS (Intelligent Transportation Systems)
• Comprehensive Lifetime Warranty
Available at:
www.
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
ORDERING INFORMATION
PART
NUMBER
MULTIMODE
62.5/125µm**
SINGLEMODE
9/125µm
DESCRIPTION
FIBERS
OPTICAL
REQUIRED PWR BUDGET
MAX.
DISTANCE*
VADT14120WDM
VADR14120WDM
Video Transmitter & Audio Transceiver/Data Transceiver (1310/1550 nm)
Video Receiver & Audio Receiver/Data Transceiver (1550/1310 nm)
1
VADT14130WDM
VADR14130WDM
Video Transmitter & Audio Transceiver/Data Transceiver (1310/ 1550 nm)
Video Receiver & Audio Receiver/Data Transceiver (1550/ 1310 nm)
1
17 dB
31 miles (51 km)
VADT14130WDMHP Video Transmitter & Audio Transceiver/Data Transceiver (1310/ 1550 nm)
VADR14130WDMHP Video Receiver & Audio Receiver/Data Transceiver (1550/ 1310 nm)
1
23 dB
43 miles (69 km)
10 dB @ 1550 nm 2 miles (3 km)
10 dB @ 1310 nm
ACCESSORIES♦
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
OPTIONS
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC’ for SC Connector
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected] ■ For an office near you go to: www.ifs.com
With Offices in Asia Pacific ■ Australia ■ Europe ■ Latin America
79
VADT/VADR14100WDM SERIES
TECHNICAL SPECIFICATION
DIGITALLY ENCODED VIDEO WITH BI-DIRECTIONAL STEREO AUDIO/
2 DATA CHANNELS AND REVERSE SYNC
SPECIFICATIONS
CONNECTORS
Power:
Audio and Data:
Video:
Optical:
Video and Reverse
Sync (Genlock):
VIDEO
Video Input:
Video Bandwidth:
Differential Gain:
Differential Phase:
Tilt:
Signal-to-Noise Ratio (SNR):
1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
<2%
<0.7°
<1%
>67 dB
Terminal Block with Screw Clamps
DB 25 Connector
BNC (Gold Plated Center-Pin)
ST, SC or FC (see ordering information)
BNC (Gold-Plated Center Pin)
ELECTRICAL & MECHANICAL
DATA
Data Interface:
Power:
Surface Mount:
Rack:
Number of Rack Slots:
Current Protection:
RS-232, RS-422 ,or 4 wire RS-485
with Tri-State
NRZ, NRZI, Manchester, Bi-phase
DC-100 kbps (NRZ)
Simplex or Full-Duplex
Data Format:
Data Rate:
Operating Mode:
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount:
Rack Mount:
Shipping Weight:
AUDIO
No. of Bits:
Sampling Rate:
Bandwidth:
Maximum Input/Output Level:
Signal-to-Noise Ratio (SNR):
Total Harmonic Distortion:
DTE/DCE Interface:
Channel Crosstalk:
Input/Output:
20
52.3 KHz
20 Hz to 18 KHz @ -1 dB
0 dBm across 600 ohms
87 dB, Min.
0.01% @ 0 dB Output Level
User-Selectable
-100 dB at 1 KHz
Balanced or Unbalanced, 600 ohm
WAVELENGTH
1310/1550 nm, Multimode
1310/1550 nm, Singlemode
NUMBER OF FIBERS
1
12 VDC @ 500 mA
From Rack
2
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
< 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
LED INDICATORS
AGENCY COMPLIANCE
VADT Transmitter Unit:
VADR Receiver/ Data Transceiver Unit:
• Video Input Sync Presence (Bi-Color LED)
• Data Transmit
• Data Receive
• Analog-to-Digital Converter Overload (Bi-Color LED)
• Optical Carrier Detect/Line-Lock (Bi-Color LED)
• Operating Power
• Video Output Sync Presence (Bi-Color LED)
• Data Transmit
• Data Receive
• Analog-to-Digital Converter Overload (Bi-Color LED)
• Optical Carrier Detect/Line-Lock (Bi-Color LED)
• Operating Power
Federal Supply Schedule
MADE IN THE USA
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
RECEIVER
MODEL
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
VADT14120WDM
VADR14120WDM
10 dB @ 1550 nm
10 dB @ 1300 nm
2 miles (3 km)
VADT14130WDM
VADR14130WDM
17 dB
31 miles (51 km)
VADT14130WDMHP
VADR14130WDMHP
23 dB
43 miles (69 km)
TRANSMITTER
MODEL
WAVELENGTH
Multimode
62.5/125µm**
1310/1550 nm
Singlemode
9/125µm
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
To External
Genlock
VADT14130WDMHP
Video
(Coax)
ifs
up to 43 miles
(69.7 km)
SYNC
VADR14130WDMHP
International
ifs
Fiber
Systems
Incorporated
203.426.1180
Video
(Coax)
International
Fiber
Systems
Incorporated
203.426.1180
1 Fiber
9/125µm MM
P/T/Z Data
Audio
Pre-Amp
Control
Data
Control
Data
Audio
Pre-Amp
Keyboard
Amp/Speaker
Amp/Speaker
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
80
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement