Redundant Systems
Redundant Systems
Outdoor Packaged SSPAs
Hub mountable, 200W C-Band 1:1 Redundant System
Hub mountable, 100W S-Band 1:1 Redundant System
King post mount, 600W C-Band 1:1 Redundant System
DESCRIPTION
Paradise Datacom’s Outdoor series of redundant amplifier
systems provide the highest degree of earth station
redundancy and reliability. Based on Paradise Datacom’s
family of rugged and robust outdoor SSPAs, these systems
provide the highest MTBF’s possible in outdoor mounted
SSPAs.
These systems can be configured in either 1:1 or 1:2 redundant
configurations using any of the Paradise Datacom family of
Outdoor SSPAs. The RCP2-1100/1200 Redundant Controller
provides an extremely user friendly interface for complete
monitor and control of the high power amplifiers in either 1:1 or
1:2 configurations.
The RCP front panel mimic display shows the on-line amplifiers
and the current switch positions. Dedicated fault lights provide
easy indication of system status. All RCP2-1X00 monitor and
control is available locally, at the front panel LCD display, as
well as remotely by the RS232 or RS485 interface ports.
Paradise Datacom LLC
328 Innovation Blvd.
State College, PA 16803
Tel: (814) 238-3450
Fax: (814) 238-3829
1 OF 9
www.paradisedata.com
FEATURES
• System Output Power to:
400W S-Band;
600W C-Band;
500W X-Band;
250W Ku-Band
• Universal Input, Power
Factor Corrected Power
Supply
• Output Power Monitoring
• Separate 1RU Redundant
Controller or Controllerless configurations
OPTIONS
• System Output Power
Monitor
• Reflected Power Alarm
• L-Band Input operation
• Cold Standby Amplifier
Operation
• Custom Configurations
Paradise Datacom Ltd.
1 Wheaton Road, Witham
Essex CM8 3UJ England
Tel: +44(0) 1376 515636
Fax: +44(0) 1376 533764
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
Compact Outdoor Output Power Levels
S-Band: 50W - 200W
C-Band: 50W - 300W
X-Band: 50W - 200W
Ku-Band: 25W - 125W
Compact Outdoor SSPA
High Power Outdoor Output Power Levels
S-Band: 50W - 500W
C-Band: 50W - 600W
X-Band: 50W - 350W
Ku-Band: 35W - 250W
High Power Outdoor SSPA
2 OF 9
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
Amp 1
Amp 1
RF OUT-POL 1
RF IN-POL 1
Amp 2
RF Input
RF Output
RF IN-POL 2
RF OUT-POL 2
Amp 3
Amp 2
1:1 Redundant HPA System
1:2 Redundant HPA System
Typical C-Band System Output Power
1:1 Redundant Output Power
Single Thread
Amplifier Model
Psat dBm (W)
P1dB dBm (W)
HPAC-2100A
49.9 (98)
49.4 (87)
HPAC-2140A
51.4 (138)
51.1 (129)
HPAC-2200A
52.9 (195)
52.3 (170)
HPAC-2250A
53.8 (240)
52.9 (195)
HPAC-2300A
54.6 (288)
53.9 (245)
HPAC-2400A
55.9 (389)
54.9 (309)
HPAC-2500A
56.9 (490)
55.9 (389)
HPAC-2600A
57.7 (590)
56.9 (490)
Typical Ku-Band System Output Power
3 OF 9
1:1 Redundant Output Power
Single Thread
Amplifier Model
Psat dBm (W)
P1dB dBm (W)
HPAK-2040A
45.9 (39)
44.9 (31)
HPAK-2050A
46.9 (49)
45.9 (39)
HPAK-2070A
48.4 (69)
47.4 (55)
HPAK-2100A
49.9 (98)
48.9 (78)
HPAK-2125A
50.9 (123)
49.9 (98)
HPAK-2200A
52.9 (195)
51.9 (155)
HPAK-2250A
53.9 (246)
52.9 (195)
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
General Specifications
PARAMETER
Gain
Gain Flatness
Gain Slope
Gain Variation vs. Temperature
Gain Adjustment
Intermodulation Distortion
AM/PM Conversion
Spurious
Harmonics
NOTES
LIMITS
UNITS
minimum
full band
per 40 MHz
0°C TO +50°C
0.1 dB resolution
adjustable by either serial or analog
voltage input: 0.5 to 2.5 VDC
75
±1.0
+0.3
±1.0
20
dB
dB
dB/40 MHz
dB
dB
3dB back off relative to P1dB
-25
dBc
(@ rated P1dB)
3.5
°/dB
(@P1dB-3dB)
1.0
°/dB
(@ rated P1dB)
-60
dBc
(@ rated P1dB-3dB)
-50
dBc
Input/Output VSWR
Noise Figure
Group Delay
Noise Output
Residual AM Noise
1.3:1
at maximum gain
12
dB
Linear
0.01
ns/MHz
Parabolic
0.003
ns/MHz2
Ripple
1.0
ns p-p
TX Band (C-, X- or Ku-Band)
-75
dBW/4 KHz
RX Band (C- or Ku-Band)
-150
dBW/4 KHz
RX Band (X-Band)
-100
dBW/4 KHz
0 - 10 KHz
-45
dBc
10 KHz - 500 KHz
-20 (1.25 + log F)
dBc
500 KHz - 1 MHz
-80
dBc
Phase Noise
IESS -308/309 - 10 dB
Environmental
Operating Temperature
Ambient
-40 to +60
°C
condensing
100
%
Integrated
Forced air
Size,
Compact Outdoor
width X length X height
Size,
High Power Outdoor
width X length X height
10.0 X 19.5 X 6.50
254 X 495 X 165
21.0 X 27.95 X 13.5
533 X 710 X 343
36 (16.4)
44 (20)
125 (57)
inches
mm
inches
mm
lbs.(kg)
lbs.(kg)
lbs.(kg)
Paint
White; powder coat
Relative Humidity
Cooling System
Mechanical
Weight,
Compact Outdoor
Weight,
High Power Outdoor
Finish
C-Band to 200W / Ku-Band to 70W
>200W C-Band / >70W Ku-Band
Specifications are subject to change.
4 OF 9
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
PARADISE
DATACOM
RCP2-1100
1:1 REDUNDANT
SYSTEM CONTROLLER
RCP2-1100 1:1 Redundant Controller
PARADISE
DATACOM
RCP2-1200
1:2 REDUNDANT
SYSTEM CONTROLLER
RCP2-1200 1:2 Redundant Controller
The RCP2-1X00 is the heart of the Redundant System. It provides an extremely user friendly
interface for complete monitor and control of the high power amplifiers.
The front panel mimic display shows the on-line amplifiers and the current switch positions.
Dedicated fault lights are provided for easy indication of system status.
All RCP2-1X00 monitor and control is available locally, at the front panel LCD display, as well
as remotely by the RS232 or RS485 interface ports.
Audible alarms and a full compliment of parallel I/O signal are available at the rear panel of
the RCP2-1X00.
RCP2-1X00 Specification Summary
Characteristic
Switch Time
Specification
Fault Detection, 20 - 50 msec
Total Switchover (including mechanical switch) - 100 msec maximum
Switch Drive
26 VDC @ 5 Amps
Alarm Input
Closure to Ground, (Ground=OK / Open=Fault)
Serial Communication
RS232 / RS485 4 wire
Parallel I/O
Status Outputs
Form C Relay Contacts (10 sets)
Control Inputs
Contact Closure to Ground
AC Input Power
85-265 VAC, 47-63 Hz, 1 A max, > 0.93 power factor
Mechanical
Dimensions
1.75 in. H x 19.0 in. W x 13.3 in D
[1RU]
44.5 mm H x 483 mm W x 338 mm D
Weight
Temperature
5 OF 9
5 lbs. (2.3 kg)
o
0 to 50 C operating (non-condensing)
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
S/ N: XX XX
MODE L: XXXXXX XXXXXX
C-B and
Solid S t at e Power Amplifi er System
P /N: LXX XX XX-X
RF OUTPUT
J2
RF OUTPUT
J2
Outline Drawing,
1:1 C-Band
High Power Outdoor SSPA
System
6 OF 9
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
C-Band
SSPA SYSTEM
Outline Drawing,
1:1 C-Band
Compact Outdoor SSPA
System
7 OF 9
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
Part Number Configuration, High Power Outdoor System
HPA
2
W
Band
S - S-Band
C - C-Band
X - X-Band
K - Ku-Band
Power Level (in Watts)
S-Band
400 or 500
C-Band
250, 300, 400, 500 or 600
X-Band
350 or 500
Ku-Band
100, 125, 200 or 250
Frequency Sub Band
S-Band
A - 2.020 - 2.120 GHz
B - 2.200 - 2.300 GHz
C-Band
A* - 5.85 - 6.425 GHz
B* - 5.85 - 6.725 GHz
C - 5.75 - 6.670 GHz
D* - 6.425 to 7.025 GHz
X-Band
A* - 7.90 to 8.40 GHz
B - 7.50 to 8.50 GHz
D - 7.70 to 8.40 GHz
E - 7.75 to 8.50 GHz
Ku-Band
A* - 14.00 - 14.50 GHz
B* - 13.75 - 14.50 GHz
* Available with optional BUC
Configuration Modifier
XXX = Standard
SXX = Input Sample
XCX = Reflected Power Monitor &
Ethernet Port
XNX = Ethernet Port
XVX = Reflected Power Monitor
XXR* = Receive Band Reject Filter
* S-Band Sub Band ‘A’ only, 400W max.
System Configuration
A* = 1:1 w/ Input Switching, Internal control
B = 1:1 w/ Input Splitter, Internal control
C* = 1:2 w/ Input Switching & RCP2-1200**
D = 1:2 w/ Input Switching, Internal control
F = 1:1 w/ Input Splitter & RCP2-1100**
H* = 1:1 w/ Input Switching & RCP2-1100**
S = System (Custom)
* Not available with BUC options C, D or P (SSPA
containing external reference BUC)
** Standard Cable Length of 100 ft. (30m) with RCP2
Block Up Converter
B = BUC (Custom)
C = 10 MHz Ext. Ref. Std. LO
D = 50 MHz Ext. Ref. Std. LO
E = 10 MHz Int. Ref. Std. LO
F = 50 MHz Int. Ref. Std. LO
M = Internal Reference ZBUC (FSK)
P = External Reference ZBUC (FSK)
X = None
Package
W = Weather proof (NEMA)
Example - A 400W S-Band 1:1 Redundant High Power Outdoor SSPA System with input
splitter is part number: HPAS2400AWXBXXX.
8 OF 9
203581 REV F ECO 15102
Redundant Systems
Outdoor Packaged SSPAs
Part Number Configuration, Compact Outdoor System
HPA
2
C
Band
S - S-Band
C - C-Band
X - X-Band
K - Ku-Band
Configuration Modifier
Power Level (in Watts)
S-Band
050, 100, 200 or 300
C-Band
030, 040, 050, 075, 100, 140,
200, 250 or 300
X-Band
060, 075, 100, 140, 200, or 250
Ku-Band
010, 020, 025, 035, 040, 050,
070, 100, or 125
Frequency Sub Band
S-Band
A - 2.020 - 2.120 GHz
B - 2.200 - 2.300 GHz
C-Band
A* - 5.85 - 6.425 GHz
B* - 5.85 - 6.725 GHz
C - 5.75 - 6.670 GHz
D* - 6.425 to 7.025 GHz
X-Band
A* - 7.90 to 8.40 GHz
B - 7.50 to 8.50 GHz
D - 7.70 to 8.40 GHz
E - 7.75 to 8.50 GHz
Ku-Band
A* - 14.00 - 14.50 GHz
B* - 13.75 - 14.50 GHz
* Available with optional BUC
Package
C = Standard Compact Outdoor (CO)
XXX = Standard
BXX* = 110 VAC Option and
Summary Alarm Indicator
KXX* = 110 VAC Option
LXX = Summary Alarm Indicator
XMX = MS-connector Covers
XXA = Side-mount AC Input,
Location ‘A’
XXD = 48V Input
XXF = Side-mount 48V Input,
Location ‘A’
* Available in C-Band models >140W,
X-Band models of 140W-200W and Ku-Band
models >100W.
System Configuration
A* = 1:1 w/ Input Switching, Internal control
B = 1:1 w/ Input Splitter, Internal control
C* = 1:2 w/ Input Switching & RCP2-1200**
D* = 1:2 w/ Input Switching, Internal control
F = 1:1 w/ Input Splitter & RCP2-1100**
H* = 1:1 w/ Input Switching & RCP2-1100**
S = System (Custom)
* Not available with BUC options C, D or P (SSPA
containing external reference BUC)
** Standard Cable Length of 100 ft. (30m) with RCP2
Block Up Converter
B = BUC (Custom)
C = 10 MHz Ext. Ref. Std. LO
D = 50 MHz Ext. Ref. Std. LO
E = 10 MHz Int. Ref. Std. LO
F = 50 MHz Int. Ref. Std. LO
M = Internal Reference ZBUC (FSK)
P = External Reference ZBUC (FSK)
X = None
Refer to specification sheet 204020 for Fiber options.
Example - A standard frequency 100W C-Band 1:1 Redundant Compact Outdoor SSPA
System with input switching and no block up converter is part number: HPAC2100ACXAXXX.
9 OF 9
203581 REV F ECO 15102
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement