24V LITHIUM-ION CORDLESS STRING TRIMMER

2100902

Owne r’s Manual

TOLL-FREE HELPLINE: 1-888-90WORKS

(888.909.6757)

www.greenworkstools.com

Read all safety rules and instructions carefully before operating this tool.

CONTENTS

Contents .............................................................................................................................. 2

.......................................................................................................... 2

General safety rules .........................................................................................................3-5

Symbols ............................................................................................................................6-7

Know your string trimmer ..................................................................................................... 8

Assembly instruction ....................................................................................................... 9-13

Operation ...................................................................................................................... 14-17

Maintenance............................................................................................................................18

Environmentally safe battery disposal...........................................................................................19

Troubleshooting............................................................................................................................20

Warranty ............................................................................................................................ 21

Exploded View .................................................................................................................... 22

Parts List ............................................................................................................................ 23

PRODUCT SPECIFICATIONS

24V CORDLESS STRING TRIMMER EDGER

Type ............................................................................................. Cordless, battery-powered

Battery .................................................................................................... 24 V 2.0Ah Lithium-Ion

Speed.............................................................................................. 8800(+/-10%)RPM (no load)

Cutting Path.............................................................................................................

12" (305 mm)

Line diameter................................................................................................. 0.065" (1.65 mm)

Line feed...........................................................................................................Single line auto-feed

Run Time.................................................................................................... approx. 40 minutes

Weight with Battery................................................................................................... 7.5lbs (3.4Kg)

Charge Time..........................................................................................................................100Min

2

GENERAL SAFETY RULES

W A R N I N G

Read and understand all instructions before using this product. Failure to follow all

• liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

• Do not allow children or untrained individuals to use this unit.

• Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

• Do not handle plug or tool with wet hands.

• Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

• Always wear safety glasses with side shields marked to comply with ANSI Z87.1.

Everyday glasses have only impact resistant lenses. They are NOT safety glasses.

Following this rule will reduce the risk of eye injury. Use face mask if operation is dusty.

• Wear eye protection when operating this product. Secure long hair above shoulder level to prevent entanglement in moving parts.

• Use extra care when cleaning on stairs.

• Do not expose to rain, store indoors.

• Do not operate in poor lighting.

• Keep all parts of your body away from any moving part.

•

• Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get caught in moving parts of the machine or its motor.

• Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

• Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.

• Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.

•

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

• Keep all bystanders, children, and pets at least 50 ft.(15.25 m) away.

• medication.

• Do not operate in poor lighting.

3

GENERAL SAFETY RULES

• Keep all parts of your body away from any moving parts and all hot surfaces of the unit.

• Do not put any object into openings. Do not use with any opening blocked; keep openings free

• Check the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the machine.

• Use only identical manufacturer’s replacement parts and accessories. Use of any other parts may create a hazard or cause product damage.

• Do not charge battery tool in rain, or damp or wet location. Following this rule will reduce the risk of electric shock.

• For household use only.

• Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when personal injury.

• Remove or disconnect battery before servicing, cleaning or removing material from the gardening appliance.

• Use only Greenworks batteries.

• Store idle appliances - When not in use, string trimmer should be stored indoors in a dry, locked place out of the reach of children.

• possible special disposal instructions.

• Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

• explosion and possibly injury.

• Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open immediately.

• Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.

• Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

• For best results, your battery tool should be charged in a location where the temperature is more than 45°F but less than 104°F. To reduce the risk of serious personal injury, do not store outside or in vehicles.

• Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice then seek immediate medical attention. following this rule will reduce the risk of serious personal injury.

4

GENERAL SAFETY RULES

• If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk.

• Do not point the string trimmer in the direction of people or pets.

• When not in use, string trimmer should be stored indoors in a dry, locked up place—out of the reach of children.

• Maintain tool with care. Keep fan area clean for best and safest performance. Follow removing the battery.

• To reduce the risk of electrical shock, do not expose to rain, do not use on wet surfaces. Store indoors.

• Save these instructions. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also.

CHILD SAFETY

Tragic accidents can occur if the operator is not aware of the presence of children.

• Keep children out of the working area and under the watchful care of a responsible adult.

• Do not allow children under the age of 14 to operate this trimmer. Children who are 14 years of age and older must read and understand the operating instructions and safety rules in this manual and must be trained and supervised by a parent.

• Stay alert, and turn the trimmer off if a child or any other person enters the working area.

• Look behind and down for small children before and while cutting backwards.

• Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that may obscure your view of a child who may run into the path of the trimmer.

5

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

DESIGNATION/EXPLANATION SYMBOL NAME

V Volts

A Amperes

Voltage

Current

Hz

W

Hertz

Watts

Frequency (cycles per second)

Power min Minutes

Alternating Current

Direct Current

Class II Construction

Time

Type of current

Type or a characteristic of current

Double-insulated construction

No Load Speed

/min Per Minute

Wet Conditions Alert

Rational speed, at no load

Revolutions, strokes, surface speed, orbits etc., per minute

Do not expose to rain or use in damp locations

Read The Operator’s Manual To reduce the risk of injury user must read and understand operator’s manual before using this product.

Eye Protection

Safety Alert

Long Hair

Wear eye protection marked to comply with

ANSI Z87.1when operating this equipment.

Precautions that involve your safety.

Failure to keep long hair away from the air inlet could result in personal injury.

Loose Clothing Failure to keep loose clothing from being drawn into air intake could result in personal injury.

Keep Bystanders Away Keep all bystanders at least 50 ft. (15.25 ) away.

6

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL

DANGER

WARNING

CAUTION

CAUTION

MEANING

Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

SERVICE

service technician. For service we suggest you return the product to your nearest

AUTHORIZED

SERVICE CENTER for repair. When servicing, use only identical replacement parts.

W A R N I N G

To avoid serious personal injury, do not attempt to use this product until you have read this Owner's

Manual thoroughly and understand it completely. If you do not understand the warnings and instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline (1-888-909-

6757) for assistance. The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before operating a power tool, always wear safety goggles, safety glasses with side shields, or a full face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.

Always use eye protection that is marked to comply with ANSI Z87.1.

W A R N I N G

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

7

KNOW YOUR STRING TRIMMER

KNOW YOUR STRING TRIMMER (See Figure 1.)

The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

Switch lock out button

Trigger switch

Auxiliary assist handle

Battery pack

Edger adjustment button

Pivoting head adjustment button

Edging guide wheel

Guide

Guard

Single line cutting spool

Fig. 1

8

ASSEMBLY INSTRUCTION

W A R N I N G

• Replace the battery pack or charger immediately if the battery case or charger cord is damaged.

• Always make sure the string trimmer switch is OFF before inserting or removing the battery pack.

• Always make sure the battery pack is removed and the switch turned OFF, before inspecting, adjusting, or maintaining any other part of the hedge trimmer.

• Read, understand, and follow the Battery Charger instructions.

GUARD (

See Figure 2.)

To avoid injury, always remove the battery pack before installing the guard, changing a cutting line, or making any adjustments.

If the guard is damaged, do not use the grass trimmer/edger until it is replaced.

NOTE:

I n s t a ll t h e p r o t e c it v e g u a r d b e f o r e o p e r a it n g t h e g r a s s t ir m m e /r e d g e r t ir m m e .r

1. Remove the battery pack.

2. Invert the grass trimmer/edger to access the trimmer head.

3. Using a Phillips head screwdriver, remove the pre-installed screws (1) from the trimmer head.

4. Place the guard (2) on to the trimmer head.

5. Align the screw holes on the guard with the screw holes on the trimmer head.

6. Insert the screws into the trimmer head, fastening the guard in place.

2

1

(1) DOWN

Fig. 2

9

ASSEMBLY INSTRUCTION

AUXILIARY HANDLE (

See Figure 3.)

W A R N I N G

To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach when operating grass trimmer/edger. Keep proper balance at all times for better control of the tool in unexpected situations.

1. Position auxiliary handle )onto the upper portion of

the trimmer shaft by sliding over shaft.

2. Once auxiliary handle is in the desired in use position

tighten the knob until locked into position.

3. Auxiliary handle can be adjusted to a suitable positon.

2

Fig.3

CONNECTING UPPER/LOWER TRIMMER SHAFTS

(

See Figure 4.)

1. Open the cam lock on the upper shaft.

2. Insert the lower shaft into the upper shaft, ensuring the keyway is correctly aligned.

3. When the desired shaft length is reached, push the cam lock into the locked position.

3

1

Fig. 4

GUIDE HOLE

GUIDE GROOVE

CAM LOCK

CUTTIN G LINE

.

line needs replacing, insert a new spool.

To avoid injury, always remove the battery pack before installing the guard, changing a cutting line, or making any adjustments.

10

ASSEMBLY INSTRUCTION

To replace the spool:

(See figure 5.)

1. Replace the spool (1) with a new pre-wound spool.

2. Insert the end of line through the opening (4) in the spool housing (3).

3. Align the tabs on the spool cover with the slots in the spool housing on the trimmer head.

4. Push down on the spool cover locking it to the spool housing.

5. To advance the line when initially installed, you must pull the line while pressing the line

(3).

REPLACEMENT SPOOL MODEL#29632

2

1

3

4

5

Fig. 5

To refill the spool:

(See figure 6.)

1. Cut the length of line to 20 ft (6m) total length.

2. Bend one end of the Line 1/4 of an inch (6.4mm).

20 ft

65.6 m

Fig. 6.1

Fig. 6.2

11

ASSEMBLY INSTRUCTION

3. Take the end of the line that is bent 1/4 of an inch (6.4mm) and stick it in the hole in the spool head.

Fig. 6.3

4. Once the 1/4 of the line is inserted in to the hole, wind the spool line clockewise evenly

and overlapping the first row and continuing the process until complete.

Fig. 6.4

5. Once complete the last layer of line should be evenly wounded. To keep the line from unraveling

hook the line as shown in figure.

Fig. 6.5

12

ASSEMBLY INSTRUCTION

BATTERY

precautions, and follow the instructions in the Battery Charger section.

To remove (See Figure 7.)

1. Press the latch button (1) on the battery pack down and hold.

2. trimmer

NOTE:

may require a strong pull to remove it.

snuggly

To install (See Figure 7.)

1. Align the tongue (3) of the battery pack with the cavity in the blower housing.

2. trimmer

3. Push the battery pack into the handle until the latch locks into place.

4. Do not use force when inserting the battery pack. It should slide into position and “click”.

2

3

1

Fig. 7

W A R N I N G

• Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.

• Verify that the switch is in the OFF position before inserting or removing the battery pack.

• Verify that the battery pack is removed and the switch is in the OFF position before inspecting, adjusting, or performing maintenance on any part of the blower.

• Read, understand, and follow the instructions contained in the section entitled Charging

Procedure.

13

OPERATION

W A R N I N G

To avoid injury:

• Do not squeeze the trigger while the grass trimmer/edger is inverted.

Do not carry the grass trimmer/edger with your finger on the switch. Avoid unintentional starting.

To Turn UnitOn/Off:

(

See Figure 8.)

1. Press the safety lock out button (2) and squeeze the trigger switch (1) to start.

2. Release the trigger switch (1) to stop.

C A U T I O N

Always allow 5 seconds or more for the cutting linespool to stop rotating after releasing the trigger switch. Do not invert the grass trimmer/edger , or place your hands under the protective guard until the grass trimmer/edger spool has come to a complete stop.

2

1

1

Fig.

8

Fig.

9

Edging Function

(

See Figure 9.)

For use next to patios, driveways and walkways or any areas requiring a well groomed edge line.

1. Push on the edge button(1) and tilt the trimmer head 90 degrees until the head locks into position and release button.

IMPORTANT:

The battery must be removed before making adjustments.

Lengthening the Line

(See Figure 10.)

While the grass trimmer/edger is operating, the cutting line gets worn down and becomes shorter. This trimmer is equipped with Automatic Line Advancement which automatically feeds additional line. If the line does not automatically advance, the trimmer line may be tangled or empty.

To adv ance the line, stop and restart the trimmer.Upon starting, the line will automatically advance 1/4”(6.4mm).

14

OPERATION

Fig. 10

Trimmer Tips

Before each use

• Make sure the protective guard is tightly installed. Tighten the guard screw.

• Make sure the battery is fully charged and that the charger is disconnected before using or storing the trimmer.

• Do not store the grass trimmer/edger in sunlight, in an excessively warm place, or near a furnace. The battery life will be shortened.

• If the battery must be stored in a warm place, charge it frequently.

• Before trimming, inspect the area for string, wire, branches or other material that may become entangled in the cutting line and thrown.

During use

• Trim only when the grass and weeds are dry.

• Do not trim grass at night. Always make sure you have adequate lighting.

• Hold the grass trimmer/edger by both the switch handle and the auxiliary handle for best control and balance.

• Stand with the cutting head tipped down at an angle in front, guiding the grass trimmer/edger in a semicircular motion around you.

• If possible, guide the grass trimmer/edger to the left to cut.The line will cut as soon as it leaves the guard, and the clippings are thrown away from you.

• To produce a smoothly trimmed area, move the grass trimmer/edger in and out of the area being cut with consistent speed and height.

• Use only the tip of the cutting line to do the trimming, especially near walls and fences.

Trimming with the side of the cutting line may overload the motor, wear out the line faster, and break the line more often.

• Do not rest the trimmer spool on the ground while trimming. This will cause spool wear and battery drain.

• If the grass is higher than 6” (15 cm), trim in small stages.

• When the grass trimmer/edger is turned off and the spool stops rotating, the cutting line will relax and may recede. Feed extra cutting line before storing the trimmer to prevent losing the line completely into the spool.

• If the diameter of the cutting area gets smaller, the line is worn down and needs to be advanced more often.

• If the grass trimmer/edger is not cutting correctly, the cutting line may not be feeding properly.

Remove and rewind the line spool.

15

OPERATION

CHARGING PROCEDURE (

See Figure 11.

)

The battery is not shipped fully charged. It is recommended to fully charge before first use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be charged at any time. A fully discharged battery pack will require approximately

9

0 minutes to fully charge from a discharged state.

1. Plug the charger into an AC power outlet.

2. Insert the battery pack (3) into the charger.

This is a diagnostic charger. The Charger LED Lights will illuminate in specific order to communicate the current battery status. They are as follows:

CHARGING PROCEDURE (LED INDICATOR)

BATTERY IS CHARGING:

FULLY CHARGED:

BATTERY IS TOO WARM:

(REMOVE FOR APPROX. 30

MINUTES TO ALLOW TO COOL)

NO BATTERY PRESENT

DEFECTIVE BATTERY:

(REMOVE AND REPLACE WITH

NEW BATTERY IF THIS OCCURS)

RED

RED

RED

RED

RED

RED

GREEN

ORANGE

GREEN

RED

BLINKING

3

1

Fig.11

CHECKING THE CHARGE

If the battery pack does not charge properly:

• Check the current at the power outlet with another tool. Make sure that the outlet is not turned off.

• Check that the charger contacts have not been shorted by debris or foreign material.

• If the surrounding air temperature is not normal room temperature, move the charger and battery pack to a location where the temperature is between 45˚F and 104˚F .

16

2

OPERATION

W A R N I N G

If the battery is inserted into the charger when warm or hot, the CHARGING LED indicator light on the charger may switch on and illuminate ORANGE. If this occurs allow the battery to cool outside of the charger from approximately 30 minutes.

CHARGER MOUNTING (

See Figure 12.

)

1. This charger can be installed hanging on a wall using two screws (not supplied)

2. Locate the placement for the charger to be wall mounted.

3. If fastening to wood studs use 2 wood screws.

4. Drill two holes 2 3/8" (6 cm) on center ensuring they are level.

5. If fastening to drywall use wall anchors and screws to secure the charger to the wall.

Fig. 1 2

1 7

MAINTENANCE

W A R N I N G

before adjusting, inspecting, or cleaning the blower.

Cleaning

Remove the battery pack.

1. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air vents free of obstructions, grass and debris.

Do not spray, wash, or immerse the air vents in water.

2. Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents or detergents on the plastic housing or plastic components. Certain household cleaners may cause damage, and may cause a shock hazard.

Battery Pack

• Store the battery pack fully charged.

• Once the charging light turns green, remove the battery from the charger and disconnect the charger from the outlet.

• Do not store the battery pack on the tool or in the charger.

• After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.

Charger Maintenance

• Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and do not place the charger in wet conditions.

• Unplug the charger when there is no battery pack in it.

• Fully charge the batteries before placing them in storage. Do not recharge a fully charged battery pack.

• Overcharging will shorten battery life.

• Recharge the battery pack whenever there is less power. Do not allow the batteries to become completely discharged.

• Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the charger in direct sunlight. Recharge at room temperature between 45 and 104˚F (7 and

40˚C). If the battery pack is hot, allow it to cool down before recharging.

18

ENVIRONMENTALLY SAFE BATTERY DISPOSAL

The following toxic and corrosive materials are in the batteries used in this grass trimmer battery pack:

Lithium, a toxic material.

W A R N I N G

environment. Before disposing of damaged or worn out nickelcadmium battery packs, contact your local waste disposal agency, or the local Environmental Protection Agency for information for cadmium disposal.

W A R N I N G

If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use.

Dispose of it and replace with a new battery pack. DO NOT ATTEMPT TO REPAIR IT!

To avoid injury and risk of fire, explosion, or electric shock, and to avoid damage to the environment:

• Cover the battery's terminals with heavy-duty adhesive tape.

• DO NOT attempt to remove or destroy any of the battery pack components.

• DO NOT attempt to open the battery pack.

• If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the solution in the eyes or on skin, and do not swallow it.

• DO NOT place these batteries in your regular household trash.

• DO NOT incinerate.

• waste stream.

•

1 9

TROUBLESHOOTING

PROBLEM

Motor fails to start when switch trigger is depressed.

POSSIBLE CAUSE SOLUTION

Battery is not secure.

To secure the battery pack, make sure the latches on the top of the battery pack snap into place.

Trimmer smokes during operation.

Cutting line does not advance.

Battery is not charged.

Charge the battery pack according to the instructions included with your model.

Trimmer damaged.

Do not use string trimmer.

Line may be tangled on spool.

Line has run out.

Call for technical service.

Remove battery. remove spool cover and spool. unwind spool and rewind, ensuring that line is not tangled.

Replace spool or spool line.

2 0

LIMITED FOUR-YEAR WARRANTY

GREENWORKS™ hereby warranties this product, to the original purchaser with

proof of

purchase, for a period of four (4) years against defects in materials, parts or workmanship.

GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for units which have been used for personal use that have not been hired or rented for industrial/ commercial use, and that have been maintained in accordance with the instructions in the owners’ manual supplied with the product from new.

Battery carries a two (2) year warranty against defects in workmanship and materials. Batteries must be charged in accordance with the operator’s manuals directions and regulations in order to be valid.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or

2. The unit, if it has not been operated and/or maintained in accordance with the owner's manual; or

3. Normal wear, except as noted below;

4. Routine maintenance items such as spool-line, spool cover, blade sharpening;

5.

GREENWORKS HELPLINE (1 888 90WORKS):

Warranty service is available by calling our toll-free helpline, 9am to 5pm EST. at

1-888-909-6757 (1-888-90WORKS).

TRANSPORTATION CHARGES:

Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. It is the purchaser’s responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by GREENWORKS.

2 1

EXPLODED VIEW

9

10

2 2

PARTS LIST

Parts Num.

5

6

7

8

9

10

3

4

1

2

Model Num.

31101981

31103978

34107727

311091413

31105710

3411546A-6

34101719A

34114727

33301708

3220905

Description

Greenworks 24V Li-Ion charger

Greenworks 24V 2Ah Li-Ion battery

Auxiliary handle

Full shaft assembly

0.065’’ spool assy.

Single line spool cover

24V guard assy.

Auxiliary handle knob

Edge guide

Screw

Q'ty

1

1

1

1

1

3

1

1

1

1

Made in China

2 3

TOLL-FREE HELPLINE: 1-888-90WORKS

(888.909.6757)

Rev: 01 (12-15-14) Printed in China on 100% Recycled Paper