advertisement
MODEL
DS 7DF
CORDLESS DRIVER DRILL
DS 7DF
POWER TOOLS
TECHNICAL DATA
AND
SERVICE MANUAL
D
LIST No. F881 Mar. 2003
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
REMARK:
Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol(s) is(are) used in the place of company name(s) and model name(s) of our competitor(s). The symbol(s) utilized here is(are) as follows:
Symbols Utilized
B
Company Name
BOSCH
Competitors
Model Name
GSR7.2-1
CONTENTS
Page
8-2. Inherent Drawbacks of Cordless Driver Drills Requiring Particular Attention
During Sales Promotion .....................................................................................................................9
1. PRODUCT NAME
Hitachi 7.2 V Cordless Driver Drill, Model DS 7DF
2. MARKETING OBJECTIVE
The new Model DS 7DF was developed based on the well-reputed Model DN 10DSA to reinforce the 7.2-V product line. As the Model DS 7DF is equipped with the T-type handle and the clutch, small screws can be tightened easily (it is difficult by the Model DN 10DSA). Besides, the Model DS 7DF is equipped with the softtouch and nonskid grip handle made of elastomer (soft resin). The cooling fan incorporated in the motor greatly enhances the cooling effect, and the variable speed switch with feedback system ensures a sufficiently large torque even at a low speed.
3. APPLICATIONS
Tightening and loosening wood screws, self-tapping screw and machine screw
Drilling into wood materials, plastic, mild steel and aluminum
4. SELLING POINTS
10 mm (3/8") keyless chuck
Compact and light
[Overall length: 195 mm, weight: 1.2 (EB 712S)/1.3 (FEB 7S)]
Durable fan-cooled motor
Convenient bit holder
22-position adjustable torque setting
Variable torque setting for fastener tightening
Variable speed switch with braking function
Equipped with feedback power control
7.2 V cassette battery
Push-button type reversing switch
Soft-touch elastomer grip handle
Convenient strap
--- 1 ---
4-1. Selling Point Descriptions
4-1-1. Soft-touch elastomer grip handle
The Model DS 7DF is equipped with the soft-touch and nonskid grip handle made of elastomer (soft resin).
Besides, the shape of the handle is improved for comfortable gripping.
Maker
Model
Soft grip handle
HITACHI
DS 7DF DN 10DSA
Equipped None
B
None
DS 7DF
Previous T-type handle
Gentle shape for comfortable gripping
Elastomer material
(Soft resin)
4-1-2. 22-position Adjustable Torque Setting
The torque can be set finely thanks to adoption of the 22 clutch positions to improve the operability.
Guide for selecting proper tightening torque
Clutch position
1
•
4 (Indication: •)
•
7
•
10 (Indication: •)
•
13
•
16 (Indication: •)
•
19
•
22
Torque
0.49 N
• m [5 kgf
• cm]
0.98 N
1.47 N
1.96 N
2.45 N
2.94 N
3.43 N
3.92 N
•
•
•
•
•
•
• m [10 kgf m [15 kgf m [20 kgf m [25 kgf m [30 kgf m [35 kgf m [40 kgf
•
•
•
•
•
•
• cm] cm] cm] cm] cm] cm] cm]
Clutch dial
* Tightening torque may be different depending on types of screws and workpieces. Instruct the customer to
check the types of screws and workpieces to be used before operation.
--- 2 ---
4-1-3. Durable fan-cooled motor
The cooling fan incorporated in the motor and the air vents provided in its outer frame greatly enhance the cooling effect, ensuring improved durability in continuous operation.
Intermittent load test: 1.0 N
• m {10 kgf
• cm}, 20 cycles/min.
: Saturated (No abnormality)
X : Burnt
B
Cycle
Fig. 1 Curves of motor temperature rise
4-1-4. Variable speed switch with braking function
The braking function allows the driver unit to stop rotation immediately when the trigger switch is released, which is a convenient feature during actual working. Also, the feedback system ensures a sufficiently large torque even in the variable speed range.
Maker
Model
Type
Feedback circuit
DS 7DF
HITACHI
DN 10DSA
Variable speed
Equipped
On-off
None
Electric brake Equipped Equipped
B
Variable speed
Not indicated
Equipped
4-1-5. 10 mm (3/8") keyless chuck
The keyless chuck facilitates fast and easy replacement of driver bits. Replacement can be carried out simply by holding the ring with one hand, while turning the sleeve with the other hand.
Ring
Loosen
Tighten
--- 3 ---
Sleeve
5. SPECIFICATIONS
Capacity
Keyless chuck
(10TLRG-N)
Rotation speed
Torque
Screwdriver Machine screw
• • • • • • • •
6 mm (1/4")
Wood screw
• • • • • • • • • • • •
5.1 dia. x 32 mm (#11 x 1-1/4")
Drill Metal
• • • • • •
Mild steel 10 mm (3/8") [Thickness 1.6 mm (1/16")]
Aluminum 10 mm (3/8") [Thickness 1.6 mm (1/16")]
Wood
• • • • • • • • • • • • • • • • • • • • • •
15 mm (19/32") [Thickness 18 mm(11/16")]
Mount type
• • • • • •
Screw-on (UNF 1/2" --- 20)
Diameter
• • • • • • • • •
0.8 --- 10 mm (1/32" --- 3/8")
0 --- 600/min
Slip torque
• • • • • • • •
5 --- 40 N • m (5 --- 40 kgf • cm, 5 --- 35 in-lbs.) [22 stages]
Max. torque
• • • • • • •
8 N • m (82 kgf • cm (71 in-lbs.))
DC magnet motor Type of motor
Type of switch
Handle configuration
Enclosure
Battery
(Type FEB 7S/EB 712S)
Charger
(Model UC 7SD)
Trigger switch with push button for forward and reverse rotation changeover
T-type
Body
• • • • • • • • • • • • • • • • • • • • • •
Glassfiber reinforced polycarbonate resin (green) and thermoplastic elastomer (black)
Battery
• • • • • • • • • • • • • • • • • • •
ABS resin (black)
Charger
• • • • • • • • • • • • • • • • • •
ABS resin (black)
Sealed cylindrical nickel cadmium battery
Nominal voltage
• • • • • • • • • • • • • • •
DC 7.2 V
Nominal life
• • • • • • • • • • • • • • • • • • • • •
Charging/discharging: approximately 500/300 times
Nominal capacity
• • • • • • • • • • • • •
1.4 Ah/1.2 Ah
Charging time
• • • • • • • • • • • • • • • • • •
60/50 minutes
(with standard accessory charger at ambient temperature of 20 ˚C)
Charging temperature
• • • • • • •
10 ˚C --- 40 ˚C (50 ˚F --- 104 ˚F)
Overcharge prevention circuit:
A thermostat monitors the surface temperature of the battery, and on detecting the temperature rise which occurs on completion of charging, automatically turns off the unit to prevent the battery from overcharge.
Input capacity: 28 W
Function: On
• • • • • • • • • • • • • • • • • • • • •
During charging
Off
• • • • • • • • • • • • • • • • • • • • •
Charging completed
Weight
Standard accessories
Main body (including FEB 7S/EB 712S)
• • • • • • • • • • • • •
1.3 kg (2.8 Ibs.)/1.2 kg (2.6 Ibs.)
Charger unit (including cord)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1.2 kg (2.6 Ibs.)
Gross with 2 batteries (FEB 7S) and charger, case
• • • • • • • • • • • • • • • • • • •
4.1 kg (9.0 Ibs.)
Gross with battery (FEB 7S) and charger, case
• • • • • • • • • • • • • • • • • • • • • • • •
3.8 kg (8.8 Ibs.)
Gross with 2 batteries (EB 712S) and charger, case
• • • • • • • • • • • • • • • • •
4.0 kg (8.4 Ibs.)
Gross with battery (EB 712S) and charger, case
• • • • • • • • • • • • • • • • • • • • • • •
3.7 kg (8.2 Ibs.)
Charger (UC 7SD)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1
Cross-recessed head (plus) driver bit (No. 2)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1
Case
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1
--- 4 ---
6. COMPARISONS WITH SIMILAR PRODUCTS
Catalog specifications
Drill chuck
Drilling
Screw driving
Rotation speed
Slip torque
Max. torque
Switch
Maker
Model
Mild steel
Aluminum
Wood
Machine screw
Wood screw
Type
Capacity
Type
Feedback circuit
Electric brake
Reversing switch
Handle shape
Soft grip handle
Strap
Nominal capacity
Nominal voltage
Charging time*
Overall length
Dimension
Overall height
DS 7DF
10 mm (3/8")
10 mm (3/8")
15 mm (19/32")
6 mm (1/4" dia.)
5.1 dia. x 32
(#11 x 1-1/4")
0 --- 600 /min
0.5 --- 3.9 N • m
5 --- 40 kgf • cm
(4.3 --- 35 in-lbs.)
[22 positions]
8.0 N • m
82 kgf • cm
(71 in-lbs.)
Keyless
10 mm (3/8")
Variable speed
Equipped
HITACHI
DN 10DSA
10 mm (3/8")
10 mm (3/8")
10 mm (3/8")
4.5 dia. x 20
(3/16 x 3/4")
0 --- 600 /min
8.0 N • m
82 kgf • cm
(71 in-lbs.)
Keyless
10 mm (3/8")
On-off
None
Equipped
Push-button
T-type
Equipped
Equipped
1.4 Ah 1.2 Ah
7.2 V
60 min. 50 min.
195 mm (7-43/64")
222 mm
(8-47/64")
214 mm
(8-27/64")
Equipped
Lever
Pistol type
None
None (hook)
1.4 Ah
7.2 V
60 min.
185 mm (7-9/32")
205 mm (8")
Weight 1.3 kg
(2.9 lbs.)
1.2 kg
(2.6 lbs.)
1.1 kg
(2.4 lbs.)
Remarks*
• • • • • • • •
Charging time may vary depending on charger to be used.
B
10 mm (3/8")
10 mm (3/8")
15 mm (19/32")
Not indicated
6 dia. x
(1/4 x )
0 --- 600 /min
Not indicated
[5 positions]
8.0 N • m
82 kgf • cm
(71 in-lbs.)
Keyless
10 mm (3/8")
Variable speed
Not indicated
Equipped
Push-button
T-type
None
None
1.2 Ah
7.2 V
60 min.
202 mm (7-61/64")
236 mm (9-19/64")
1.3 kg
(2.9 lbs.)
--- 5 ---
7. WORKING PERFORMANCE PER SINGLE CHARGE
Drilling and fastening performance comparison per charge
Test conditions Maker Model name
0
No. of drilling or fastening operations per charge (*1)
*400
100
*800
200
*1200
300
DS 7DF
(W/FEB 7S)
20
HITACHI
DS 7DF
(W/EB 712S)
17
Working time
(sec./pc.)
29
29
B 17 29
HITACHI
DS 7DF
(W/FEB 7S)
20
DS 7DF
(W/EB 712S)
B
140
130
165
2.4
2.4
2.4
DS 7DF
(W/FEB 7S)
HITACHI
DS 7DF
(W/EB 712S)
B
245
220
285
1.2
1.2
1.2
DS 7DF
(W/FEB 7S)
HITACHI
DS 7DF
(W/EB 712S)
B
510
435
375
1.2
1.2
1.2
Remark* Number of machine screws fastened per charge
Remark*1 Number of holes or fasteners per charge
The above table shows an example of test data obtained using the battery which is standard for this tool.
As actually measured values listed in the above table may vary depending on sharpness of drill bit, workpiece hardness (particularly in wood materials), moisture content of wood, charging condition, operator skill, etc. This data should be used as a comparative guide only.
--- 6 ---
8. PRECAUTIONS IN SALES PROMOTION
8-1. Safety Instructions
In the interest of promoting the safest and most efficient use of the Model DS 7DF Cordless Driver Drill by all of our customers, it is very important that at the time of sale, the salesperson carefully ensures that the buyer seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the meaning of the precautions listed on the Caution Plate and Name Plate attached to each tool.
A. Handling Instructions
Salespersons must be thoroughly familiar with the contents of the Handling Instructions in order to give pertinent advice to the customer. In particular, they must have a thorough understanding of the precautions for use of the cordless tools which are different from those of ordinary electric power tools.
(1) Before use, ensure that the unit is fully charged.
New units are not fully charged. Even if the units were fully charged at the factory, long periods of inactivity, such as during shipping, cause the storage battery to lose its charge. Customers must be instructed to fully charge the unit prior to use.
(2) When charging storage batteries, use only the Model UC 7SD Charger provided with the tool.
Because of the designed rapid-charging feature (about one hour), use of other battery chargers is hazardous.
(3) Connect the charger to an AC power outlet only.
Use of any other power source (DC outlet, fuel powered generator, etc.) will cause the charger to overheat and burn out.
(4) Do not use any voltage increasing equipment (transformer, etc.) between the power source and the charger.
If the charger is used with voltage higher than that indicated on the unit, it will not function properly.
(5) Conduct battery charging at an ambient temperature range of 10 ˚C --- 40 ˚C (50 ˚F --- 104 ˚F).
Special temperature sensitive devices are employed in the charger to permit rapid charging. Ensure that customers are instructed to use the charger at the indicated ambient temperature range. At temperature under 10 ˚C (50 ˚F), the thermostat will not function properly, and the storage battery may be overcharged.
At temperature over 40 ˚C (104 ˚F), the storage battery cannot be sufficiently charged. The optimum temperature range is 20 ˚C --- 25 ˚C (68 ˚F --- 77 ˚F).
(6) The battery charger should not be used continuously.
At high ambient temperature, if over three storage batteries are charged in succession, the temperature of the coils on the transformer will rise and there is a chance that the temperature fuse inserted in the interior of the transformer will inadvertently melt. After charging one battery, please wait about 15 minutes before charging the next battery.
(7) Do not insert foreign objects into the air vents on the charger.
The Charger case is equipped with air vents to protect the internal electronic components from overheating.
Caution the customer not to allow foreign materials, such as metallic or flammable objects, to be dropped or inserted into the air vents. This could cause electrical shock, fire, or other serious hazards.
--- 7 ---
(8) Do not attempt to disassemble the storage battery or the charger.
Special devices, such as a thermostat, are built into the storage battery and charger to permit rapid charging.
Incorrect parts replacement and/or wiring will cause malfunctions which could result in fire or other hazards.
Instruct the customer to bring these units to an authorized service center in the event repair or replacement is necessary.
(9) Disposal of the type FEB 7S or EB 712S storage battery
Ensure that all customers understand that Type FEB 7S or EB 712S storage batteries should be turned in to any Hitachi Power Tools sales outlet or authorized service center when they are no longer capable of being recharged or repaired. If thrown into a fire, the batteries may explode, or, if discharged indiscriminately, leakage of the cadmium compound contained in the battery may cause environmental pollution.
B. Caution Plates
(1) The following cautions are listed on the Name Plate attached to each Type FEB 7S or EB 712S storage battery.
For Asia, Europe and Oceania
--- 8 ---
8-2. Inherent Drawbacks of Cordless Driver Drills Requiring Particular Attention During Sales Promotion
The cordless driver drill offers many advantages; it can be used in places where no power source is available, the absence of a cord allows easy use, etc. However, any cordless tool has certain inherent drawbacks.
Salespersons must be thoroughly familiar with these drawbacks in order to properly advise the customer in the most efficient use of the tool.
A. Suggestions and precautions for the efficient use of the tool
(1) Use the cordless driver drill for comparatively light work.
Because they are battery driven, the output of the motor in cordless driver drills is rather low in comparison with conventional electric power tools. Accordingly, they are not suitable for continuous drilling of many holes in succession, or for drilling into particularly hard materials which creates a heavy load. Salespersons should recommend conventional electric power tools for such heavy work.
(2) Do not insert a foreign object into body vent holes.
The body on this tool has vent holes for improving the cooling efficiency. As a fan is built into the motor, a foreign object inserted through a vent hole may cause a failure. Please instruct customers to never insert a foreign object into the vent hole.
(3) Avoid "Locking" of the motor.
Locking of the motor will cause an overload current that could result in burning of the motor and/or rapid deterioration of the battery. Salespersons should advise the customer to immediately release the switch and stop operation if the motor becomes locked. (A jammed drill bit can be disengaged from the workpiece material by setting the switch to reverse rotation, or by manually turning the main body of the tool.)
(4) Variation in amount of work possible per charge
Although the nominal chargeable capacity of the storage batteries used with the Model DS 7DF is 1.4 Ah or
1.2 Ah, the actual capacity may vary within 10% of that value depending on the ambient temperature during use and charging, and the number of times the batteries have been recharged. It should be noted that other factors which may have a bearing on the amount of work possible per charge are the working conditions
(ambient temperature, type and moisture content of the workpiece, sharpness of the drill bit, etc.) and the operational skill of the user.
(5) Precautions in the use of HSS drill bits
Although the Model DS 7DF is designed for drilling capacities of 15 mm (19/32") in wood, and 10 mm
(3/8") in aluminum, and 10 mm (3/8") in mild steel, this capability is not as efficient as conventional electric power tools. In particular, when drilling through aluminum material with a 10 mm (3/8") drill bit, the drill tends to become locked when the drill bit penetrates through the material. For this reason, the customer should be cautioned to reduce thrust on the main body of the drill when drilling completely through the material to avoid locking the tool. Repeated locking of the drill causes excessive current flow from the batteries which not only decreases the amount of work possible per charge, but could also result in burning of the motor.
--- 9 ---
(6) Securely tighten the sleeve of the keyless chuck.
The keyless chuck may slip during operation if the shape of the drill bit shank is cylindrical depending on the surface conditions, materials, etc. Please instruct the customers to retighten the keyless chuck more securely if the keyless chuck slips during operation. The holding force of the keyless chuck is increased as the tightening force of the keyless chuck is increased.
(7) Avoid continuous use.
Although the Model DS 7DF can bear continuous operation under certain conditions, operating conditions are different depending on material of workpiece and sharpness of the drill bit in use. Please instruct the customers to avoid continuous use of the Model DS 7DF and take a pause about 15 minutes after a single charge operation as a guide.
B. Suggestions and precautions for the efficient use of the charger and storage batteries
If the Type FEB 7S or EB 712S storage batteries are exposed to direct sunlight for an extended period or if the tool has just been operated for a long time, charging may not be possible if the temperature of a battery (type
FEB 7S or EB 712S) is above 40 ˚C (104 ˚F). In such a case, the customer should be advised to place the battery in a shaded area with a good airflow, and allow sufficient cooling before recharging. This phenomenon is common to all existing batteries and chargers which employ temperature sensitive overcharge protection devices.
The cooling time required before recharging can be accomplished varies from a few minutes to about 30 minutes, depending on the load, duration of use, and ambient temperature.
9. REFERENCE MATERIALS
9-1. Feedback System
The Model DS 7DF has the variable speed switch equipped with the feedback system. This feedback system ensures a sufficiently large torque even in the variable speed range
(Fig. 2). For example, when operating the Model DS 7DF at a speed about 80% of the full speed, the maximum torque is about 95% of that at a full speed (curve "A"). Even when the
Model DS 7DF is operated at a speed about 30% of the full speed, the maximum torque does not decrease under about
65% of that at a full speed (curve "B") to ensure a sufficiently
Full speed
Without feedback system large torque at a low speed.
Besides, the braking function allows the driver unit to stop
Torque (%)
Fig. 2 Schematic diagram of the feedback system rotation immediately when the trigger switch is released, which is a convenient feature for continuous screw tightening or drilling works. The step-less variable speed mechanism controls the speed depending on the depressed amount of the trigger switch within the range from 0 to 600 cycles per minute. Thanks to this mechanism, positioning is easily done for screw tightening and drilling works.
--- 10 ---
10. REPAIR GUIDE
Be sure to remove the storage batteries from the main body before servicing. Inadvertent triggering of the switch with the storage battery connected will result in danger of accidental turning of the motor.
10-1. Precautions in Disassembly and Reassembly
The [Bold] numbers in the descriptions below correspond to the item numbers in the Parts List and exploded assembly diagram for the Model DS 7DF.
10-1-1. Disassembly
(1) Removal of Housing (A). (B) Set [21]
(a) First, align the "Drill mark" at the Clutch Dial [3] with the "Triangle mark" at Housing (A).(B) Set [21].
Remove the eight Tapping Screws (W/Washer) D3 x 16 [19] secured to the main body. Gently open
Housing (A) and Housing (B) while holding their battery loading sections.
(b) After Housing (B) has been removed, all the internal parts, assembled or separate, can be taken out as
they are. Lift the entire contents from Housing (A) while holding the Motor [18] and the Clutch Dial [3].
(2) Pull the Motor [18] from the Motor Spacer [15] and remove it from the Gear Box Ass'y [17]. (See Fig. 1.)
Motor [18]
Motor Spacer [15]
Fig. 1
(3) Removal of the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2] (See Fig. 2.)
(a) Mount the assembly of the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2], Clutch Dial [3] and Gear Box
Ass'y [17] in special repair tool J-331 (Code No. 321936) clamped in the vise as illustrated in Fig. 2.
In this operation, check that the pinion press-fitted in the special repair tool J-331 and Planet Gear (A) Set
[13] are engaged properly.
(b) Fully open the jaws of the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2], and turn the Special Screw
(Left Hand) M5 x 25 [1] clockwise and remove it. (Note that the Special Screw is left-hand threaded.)
(c) Fit the hexagonal bar wrench M10 into the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2] as illustrated in
Fig. 2 and remove the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2] by turning the hexagonal bar wrench counterclockwise. If it is difficult to loosen, use a pipe or other tool.
Hexagonal bar wrench
Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2]
Special Screw (Left hand)
M5 x 25 [1]
Special repair tool J-331
(Code No. 321936)
Fig. 2
--- 11 ---
Vise
(4) Disassembly of the clutch unit
(a) After press up the hook of Clutch Dial [3] with the small flat-
blade screwdriver, the Clutch Dial [3] and Click Spring [4]
can be taken out as they are. (See Fig. 3.)
(b) Turn the Nut [5] counterclockwise and remove it from the
Gear Case [8], then remove the Spring [6], Washer (D) [7],
and the sixteen Stall Balls D4 [9] from the Gear Case [8].
Take care not to lose the sixteen Steel Balls in this
operation.
Hook
Clutch Dial [3]
Flat-blade screwdriver
(5) Removal of the gear unit
Fig. 3
Remove the three Screw Sets D3 x 12 [16] connecting the Gear Case [8] and Motor Spacer [15]. Remove
Washer (A) [14], Planet Gear (A) Set [13], Pinion (B) [12], Planet Gear (B) Set [11] , Ring Gear [10] from the
Gear Case [8] in order.
(Note) Do not remove the Gear Case [8].
(6) Disassembly of the power supply unit
(Note) Do not remove the fin secured to the DC-Speed Control Switch [24] with a screw.
Disconnect Internal Wires (B) [22] [23] from the Motor [18] with a soldering iron, then disconnect them from the DC-Speed Control Switch [24] with a soldering iron in the same manner.
10-1-2. Reassembly
Reassembly can generally be carried out as the reverse of the disassembly procedure, with some items to be noted as follows.
(1) Reassembly of the power supply unit
(a) Be sure to perform wiring connections as indicated in the wiring diagram. (See Fig. 4.)
Internal Wire (B) [23]
(Red)
Motor [18]
Internal Wire (B) [22]
(Black)
(Red)
(Black)
DC-Speed Control
Switch [24]
Red mark
Positive side
Negative side
Fig. 5
Terminal Support (A) [28]
Fig. 4
--- 12 ---
(b) Pay attention to the polarity of the Motor [18] when soldering Internal Wires (B) [22] and [23] to the Motor
[18]. The red-marked side of the Motor [18] is positive. (See Fig. 5.)
(2) Reassembly of the gear unit
(a) Apply grease (Hitachi Motor Grease No. 29, Code No. 930035) to the meshing parts of the gear.
(b) Install the parts series from Ring Gear [10] to Screw Set D3 x 12 [16] into the Gear Case [8]. (See Fig. 6.)
(i) Note the direction of each parts when installing the Ring Gear [10], Pinion (B) [12] as illustrated in Fig. 6.
(ii) Install the Gear Case [8] and the Motor Spacer [15] together with the recess on the Gear Case [8]
aligned with the projection on the Motor Spacer [15].
[8]
[10]
[11]
Recess
[12]
[13]
[14]
[15]
[16]
Projection
Fig. 6
(3) Reassembly of the clutch unit
(a) Install the Steel Ball D4 [9] into the Gear Case [8] and mount Washer (D) [7] and the Spring [6] to the
Gear Case [8]. (See Fig. 7.) When mounting Wasehr (D) [7] into the Gear Case [8], align the projection
on the Gear Case [8] with the notch of Washer (D) [7].
[3]
[4]
[5]
[6]
[7]
[9]
[8]
Notch
Fig. 7
Projection
--- 13 ---
(b) Mount the Nut [5] to the Gear Case [8]. (See Fig. 8.)
Align the register mark (o) on the Nut [5] with the register mark on the Gear Case [8]. Turn the Nut [5] about 1-1/2 turns clockwise so that the register mark (oo) on the Nut [5] is aligned with the register mark on the Gear Case [8]. Check that the Y surface of the Nut [5] is aligned with the Z surface of the Gear Case
[8].
Mounting start position Mounting end position
Register mark (o) Register mark (oo)
Register mark
Register mark
Y surface
Z surface Y surface Z surface
Fig. 8
(c) With the ridge at the Click Spring [4] facing the front-side, insert Click Spring [4] into the projection of the
Gear Case [8] together with the three projections on the Gear Case [8] aligned with the three holes at the
Click Spring [4]. (See Fig. 9.)
Apply grease (Hitachi Motor Grease No. 29, Code No. 930035) to the ridge at the Click Spring [4]. Insert the Clutch Dial [3] to the Gear Case [8] (See Fig. 10.)
Mount the Nut [5] into the Clutch Dial [3] engaging the wider projection of the Nut [5] with the wider recess of the Clutch Dial [3]. (The wider recess of Clutch Dial [3] is positioned at "5" when viewed from the outside.) Make sure that the hook of Clutch Dial [3] are fitted into the groove in the Gear Case [8].
--- 14 ---
Projections
(3 pcs.)
Holes
(3 pcs.)
Ridge
Wider projection
Wider recess
"5"
Fig. 9 Fig. 10
(4) Install the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2] using the special repair tool J-331 (Code No.
321936) and secure it with the Special Screw (Left Hand) M5 x 25 [1].
(5) Install the assembly reassembled in step (1) and the assembly reassembled in step (4) together.
Apply grease (Hitachi Motor Grease No. 29, Code No. 930035 is recommended) to the pinion press-fitted on the Motor [18] shaft. Check that the pinion press-fitted onto the shaft of the Motor [18] and Planet Gear (A)
Set [13] mesh properly.
(6) Installation of the Bit Holder [26] into Housing (A)
Fit the upper and lower projections of the Bit Holder [26] in the grooves in Housing (A).
(7) Reassembly of main body (See Fig. 11.)
(a) Install the Pushing Button [25] into Housing (A).
(b) Install the assembly reassembled in step (5) into Housing (A).
Note that the projections on the Gear Case [8] and the Motor Spacer [15] are engaged in the recess in
Housing (A). (B) Set [21], and the recess on Motor [18] is engaged in the projections of Housing (A). (B)
Set [21].
Recess
Projection
Projection Recess
Housing (A)
Fig. 11
--- 15 ---
Pushing Button [25]
(c) Install the Strap [29] into Housing (A).
(d) Set the assembly reassembled in step (b) to Housing (A). (B) Set [21] and secure it with the eight Tapping
Screws (W/Washer) D3 x 16 [19].
(e) Verify proper operation of the Clutch Dial [3].
When the assembly procedure up to step (c) is completed, ensure that the number "1" on the Cluch Dial [3] and the drill mark " " are in alignment with the triangle mark on Housing (A). (B) Set [21]. If the Clutch
Dial [3] turns loosely, correctly re-install the Click Spring [4] as it is improperly installed. If the number "1" on the Clutch Dial [3] or the drill mark " " cannot reach the triangle mark on Housing (A). (B) Set [21], correctly re-install the Clutch Dial [3] referring to step (3) as it is improperly installed.
(6) Other precautions in reassembly
(a) When the assembly is completed, make sure that the turning direction of the Drill Chuck 10TLRD-N (W/O
Chuck Wrench) [2] corresponds to the position of the Pushing Button [25]. When the Pushing Button [25] is pressed from the (R)-marked side, the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2] should turn clockwise when viewed from the rear.
Also, make sure that the run-out of the Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2] holding a 9 mm dia.
test bar is below 0.8 mm at a distance of 85 mm from the front of the drill chuck.
(b) Tightening torques
Tapping Screw (W/Washer) D3 x 16 [19] : 1.1 --- 1.9 N • m (11 --- 19 kgf • cm, 9.5 --- 16.5 in-lbs.)
Special Screw (Left Hand) M5 x 25 [1] : 2.9 --- 3.9 N • m (30 --- 40 kgf • cm, 26.1--- 34.8 in-lbs.)
Drill Chuck 10TLRD-N (W/O Chuck Wrench) [2] : 12.7 --- 16.7 N • m (130 --- 170 kgf • cm, 113 --- 148 in-lbs.)
Screw Set D3 x 12 [16] : 0.6 --- 1.0 N • m (6 --- 10 kgf • cm, 5.2 --- 8.7 in-lbs.)
10-2. Precautions in Disassembly and Reassembly of the Battery Charger
Please refer to the Technical Data and Service Manual for precautions in disassembly and reassembly of the battery charger UC 7SD.
--- 16 ---
11. STANDARD REPAIR TIME (UNIT) SCHEDULES
Variable
MODEL 10 20
Fixed
Work Flow
DS 7DF
30 40 50 60
Housing
(A).(B) Set
Motor
DC-Speed
Control Switch
General Assembly
Drill Chuck
(key-less)
Gear Box Ass'y
Clutch Dial
Click Spring
Nut
Spring
Gear Case
Ring Gear
Planet Gear
(B) Set
Pinion (B)
Planet Gear
(A) Set
--- 17 ---
LIST NO.
F881
ELECTRIC TOOL PARTS LIST
CORDLESS DRIVER DRILL
Model DS 7DF
2003
•
2
•
25
(E1)
28
29
* 30
25
26
27
* 30
* 30
30
21
22
23
24
18
19
20
15
16
17
12
13
14
10
11
8
9
5
6
7
PARTS
ITEM
NO.
1
2
3
4
CODE NO.
DESCRIPTION
321-932 SPECIAL SCREW (LEFT HAND) M5X25
NO.
USED
1
312-516 DRILL CHUCK 10TLRD-N (W/O CHUCK WRENCH) 1
321-904 CLUTCH DIAL 1
321-903 CLICK SPRING 1
321-902 NUT
321-901 SPRING
312-714 WASHER (D)
321-900 GEAR CASE
321-905 STEEL BALL D4 (10 PCS.)
321-906 RING GEAR
321-907 PLANET GEAR (B) SET (3 PCS.)
321-908 PINION (B)
321-909 PLANET GEAR (A) SET (3 PCS.)
312-704 WASHER (A)
321-910 MOTOR SPACER
315-817 SCREW SET D3X12 (6 PCS.)
321-899 GEAR BOX ASS’Y
321-897 MOTOR
991-672 TAPPING SCREW (W/WASHER) D3X16
NAME PLATE
321-896 HOUSING (A).(B) SET
306-041 INTERNAL WIRE (B) (BLACK)
306-040 INTERNAL WIRE (B) (RED)
321-898 DC-SPEED CONTROL SWITCH
321-871 PUSHING BUTTON
318-237 BIT HOLDER
HITACHI LABEL
315-141 TERMINAL SUPPORT (A)
306-952 STRAP (BLACK)
321-749 BATTERY EB 712S (W/ENGLISH N.P)
321-748 BATTERY EB 712S (W/ENGLISH N.P)
320-101 BATTERY FEB 7S (W/ENGLISH N.P)
320-102 BATTERY FEB 7S (W/ENGLISH N.P)
1
16
1
3
1
1
1
1
3
1
1
3
1 INCLUD. 3-16
1
1
1
1
1
1
1
1
1
1
1
8
1
1 FOR EUROPE
1
1 FOR EUROPE
REMARKS
STANDARD ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION
501 CHARGER (MODEL UC 7SD)
502 318-236 + DRIVER BIT NO.2 55L
503 318-246 CASE
NO.
USED
1
1
1
REMARKS
DS 7DF
2 -- 03 * ALTERNATIVE PARTS Printed in Japan
(030225N)
--- 2 ---
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project