GE Security D1300 Series IFS RS-485 (2-wire) Point-to-Point Data Transceivers Overview Standard Features The IFS D1300 series data transceivers provide point-topoint transmission of half-duplex (2-wire) EIA RS-485 tri-state data signals over one or two optical ﬁbers. The transceivers are transparent to data encoding allowing for broad-range compatibility. When used as a line-terminating device, these modules are also compatible with the IFS D2300 series drop and repeat data transceivers. Models within this series are available for use with multimode or single mode optical ﬁber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive data status indicating LED’s for monitoring proper system operation. The modules are available in either stand-alone or rack mount versions. • Meets EIA RS-485 Speciﬁcations Application Examples • Access Control Systems • Building Automation and Environmental Control Systems • Computer/Data Equipment • Fire & Alarm Systems • ITS Traﬃc Signalization Networks • Tested and Certiﬁed by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Speciﬁcation for Traﬃc Signal Control Equipment. • Automatic Resettable Solid-State Current Limiters • Power, Transmit and Receive Data Status LED Indicators • No In-ﬁeld Electrical or Optical Adjustments Required • Data rates up to 400 kbps NRZ • Data Re-clocking • Transparent to Data Encoding / Compatible with Major Data Protocols • Point-to-Point Network Architecture • 2-Wire (Half-Duplex) • True Tri-State Output • Hot-Swappable Rack Modules • Distances up to 20 Miles (33 km) RS-485 (2-wire) Point-to-Point Data Transceivers For implementing point-to-point transmission of half-duplex (2-wire) EIA RS-485 tri-state data signals over one or two optical ﬁbers. • Comprehensive Lifetime Warranty Speciﬁcations GE Security Data Data Interface: Data Rate: Total Network Pulse Distortion: *-HS Option Data Rate: North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566 E [email protected] Asia T 852-2907-8108 F 852-2142-5063 Australia and New Zealand T 613-9239-1200 F 613-9239-1299 Wavelength D1300 and D1300WDMB: 850 nm, Multimode All others: 1310 nm, Multimode or Single Mode NumberOfFibers 2 Connectors Data and Power: Optical: Terminal Block with Screw Clamps ST Electrical&M echanical Power: Surface Mount: Rack: Number of Rack Slots: Current Protection: Circuit Board: Size (in./cm.) (LxWxH) Surface Mount: Rack Mount: Shipping Weight: Europe T 32-2-719-9847 F 32-2-719-9846 Latin America T 305-593-4301 F 305-593-4300 gesecurity.com/ifs 12 VDC @ 200 mA to 24 VDC @ 100 mA From Rack 1 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm < 2 lbs./0.9 kg Environmental MTBF: Operating Temp: Storage Temp: Relative Humidity: Speciﬁcations subject to change without notice © 2008 General Electric Company All Rights Reserved RS-485 (2-wire) DC - 150 Kbps* <1μs DC - 400 Kbps > 100,000 hours -40° C to +74° C -40° C to +85° C 0% to 95% (non-condensing)† †May be extended to condensation conditions by adding suﬃx ‘–C’ to model number for conformal coating. Agency compliance System Design Made in the USA Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J D1300 ifs up to 1.9 miles (3 km) Fiber Systems Incorporated International Fiber Systems Incorporated 203.426.1180 203.426.1180 Control Data D1300 ifs International 2 Fibers 62.5/125μm MM Control Data Host Ordering Information Description FibersRequired Opt.Pwr.Budget Max.Distance* Multimode D1300 62.5/125μm** D1300WDMA D1300WDMB D1320 RS-485 Data Transceiver (850 nm) RS-485 Data Transceiver (850 nm) RS-485 Data Transceiver (1310 nm) RS-485 Data Transceiver (1310 nm) 2 1 1 2 11 dB 11 dB 11 dB 10 dB 1.9 miles (3 km) 1.9 miles (3 km) 1.9 miles (3 km) 6 miles (10 km) Single Mode 9/125μm D1325 Data Transceiver (1310 nm) 1 11 dB 20 miles (33 km) Accessories♦ PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if speciﬁed at time of order) Options Add ‘-24’ for 24 VDC Power (Extra charge, consult factory) Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) Add ‘-HS’ for High Speed Data Rates up to 400 Kbps (Extra charge, consult factory) PartNumber *Optical transmission distance is limited to optical loss of the ﬁber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by ﬁber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project