Rust-Oleum Automotive 251475 Use and Care Manual

Rust-Oleum Automotive 251475 Use and Care Manual
SPRAY
TECHNICAL DATA
ATO-35
AUTOMOTIVE
WAX & TAR REMOVER
.DESCRIPTION AND USES
.
.PRODUCT APPLICATION
APPLICATION
®
Rust-Oleum Wax & Tar Remover is an effective, fastacting remover for many automotive surfaces, including
metal, plastic and fiberglass. It should be used prior to
sanding to prolong the life of sandpaper and again after
sanding as a clean-up agent prior to applying top coats.
Wax & Tar Remover removes old wax build-up before reapplication of new wax to promote an even, mirror-like
finish. It is also great for removing grease, silicone
and road film.
.PRODUCTS
SKU (32 oz. Quart)
2514757
.
Protect hands with solvent-resistant gloves and eyes with
chemical splash goggles.
.
Description
Wax & Tar Remover
Saturate a clean, lint-free cloth with Wax & Tar Remover.
Thoroughly cover area to be cleaned. Apply to a small
area (3’ x 3’) at a time. Allow to stand as long as
possible without drying, normally 4 to 6 minutes. Wipe dry
with a clean, lint-free white cloth. Turn cloth frequently to
ensure a clean side contacts surface. Replace cloth as it
becomes damp and soiled to prevent re-depositing of
contaminants.
NOTE: This product may not be compatible with all
surfaces and all conditions surrounding application. Before
applying to any surface, always test product in a small,
inconspicuous area to ensure no damage will result. Do
not use on freshly painted surfaces. Ensure paint has
cured in accordance with paint manufacturer’s instructions.
When using between paint coats, always follow
manufacturer’s instructions regarding cure times.
Do not use on metal or plastic surfaces that are hot to the
touch. For best results, apply at temperatures between
65-90°F (18-32°C) and avoid direct sunlight or strong
breezes.
.PHYSICAL PROPERTIES
.
Physical Properties
WAX & TAR REMOVER
Composition
Ethoxylated Alcohols and Water
Weight per Gallon
8.33 lbs.
Volatile Organic Compounds
677 g/l
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements
of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our
materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be
limited to replacement of defective materials. All technical information is subject to change without notice.
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877-385-8155
www.rustoleum.com
Form: GDH-630
Rev: 010815
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement