Security Color LED Monitor
INSTRUCTION MANUAL
Security Color
LED Monitor
27.0" / 32.0" Color LED Monitor.
Please read this manual thoroughly before use, and keep it handy for future reference.
2
Warnings and Cautions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instruction in the literature accompanying the product.
PRECAUTIONS
Safety: Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified
personnel before operating it any further.
Unplug the unit from the wall outlet if it is not going to be used for several days or more. To disconnect the cord, pull it out
by the plug. Never pull the cord itself.
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or
near materials (curtains, draperies) that may block the ventilation holes.
Installation: Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust or
mechanical vibration.
The unit is not designed to waterproof. Exposure to rain or water may damage the unit.
Cleaning: Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish
of the unit
3
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been moisture, does not operate normally, or
has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
QRE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2
power source only.
4
Table of Contents
1. Features
2. Operating Instructions - Controls
3. Connections
4. User Controls - Menu Operations
4-1. RGB (& DVR) Mode
4-2. CVBS (& S-Video) Mode
4-3. HDMI(& DVI) Mode
5. Specifications
6. Remote Control
------------------------------5
- - - - - - - - - - - - - - - - - - - - - - - - - - - - 6~7
----------------------------- 8
- - - - - - - - - - - - - - - - - - - - - - - - - - - 10~14
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -14
- - - - - - - - - - - - - - - - - - - - - - - - - - -15~16
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -17
1. Features
• High Quality Advanced CCTV LED Monitor
• Incredible Resolution with 650TVL
• De-Interlace technology Efficiently Eliminates Shaky and blurry image
Progressive Scan
• 3D Comb Filter Function Clear image
• Superior Color Reproduction
• VESA Wall & Ceiling mount Compatible
• Noise Reductions
• Multi window activate the PIP function. (PIP→PBP 4:3→PBP FULL)
PIP (Main / Sub) Example: CVBS1 / CVBS2, CVBS1 / S-VIDEO etc.
• Single control operated On-Screen Display user interface
• Energy Saving mode (27” only)
• Anti-burn pixel Protection
• Narrow Bezel
5
2. Operating instruction
Front Panel
1. IR Sensor
2. Controls
3. Speakers
6
Controls
1. LED
A green indicator lights when the power is ON and input signal.
A green indicator blink when the power is ON and Input No signal
A red indicator lights when the power is OFF
2. Power On/Off
When power is applied, the monitor will come ON. This button then turns the monitor on and OFF.
3. Menu / Exit
This button is used to bring up or disappear the controls menu.
Exits from the OSD system and the selected function.
4. Down / Brightness (▼/
)
Moves down the menu lists in the OSD / Selected Brightness.
5. UP / VOL. (▲/ VOL. )
Moves up the menu lists in the OSD / Selected Volume.
6. LEFT / SOURCE (◀ / SOURCE )
Selected MENU decreases the value / while in the normal active (Not MENU DISPLAY) mode, this button is used to bring up Sources
select Menu ( CVBS1,CVBS2,SVIDEO,RGB,DVR,DVI,HDMI)
7. ▶ (Select) /
(Freeze) / AUTO
This ▶ button to choose on the menu then pushes the button & Selected MENU increases the value:
While in the CVBS, S-Video mode, press this button to FREEZE (
) the picture for display. Press again to exit the FREEZE
image. While in the RGB mode, press this button to AUTO adjust the H/V POS, H/V SIZE, and phase.
7
REAR connection
1. DC JACK
Connect the adapter jack to the DC power connector on the back of the monitor. (27” monitor : DC12V,
2. Alarm INPUT
This is input for the alarm level (Max 5Vdc) of sensor.
3. S-Video INPUT
Used to connect a S-Video signal from a Camera or DVR.
4. HDMI INPUT
Used to connect a HDMI signal from a PC, Mega pixel Camera or DVR.
5. DVI INPUT
Connect DVI video signal to this connector using the supplied video cable.
6. RGB INPUT
Connect to the video output port on your PC or DVR.
7. CVBS INPUT/OUTPUT (CVBS2)
Used to connect a BNC Video signal from a camera or DVR.
8. CVBS INPUT/OUTPUT (CVBS1)
Used to connect a BNC Video signal from a camera or DVR.
9. AUDIO1 INPUT
Connect RCA audio cable to the audio output jacks of CVBS1, CVBS2, S-Video.
10. AUDIO2 INPUT
Used to connect a Stereo signal from a RGB, DVR, DVI.
8
32” monitor : DC24V)
3. Connections
To make a normal connection to the monitor, bring a cord from a camera or other video source to one of the BNC jacks or from a PC to
the PC jack on the back of the monitor.
Either the left or right BNC jack can be used for input. The other jack may be optionally connected to another user of the same signal.
Auto Termination The input circuit of the monitor normally terminates the incoming cable in 75 Ω, but these BNCs jack are autoterminating. When two cables are connected, the internal termination is switched out, letting the final destination equipment provide the
end termination.
This arrangement is also specially offered for the Y/C (S-Video) jacks.
* Supplied item
LED monitor
Power supply unit / Power cord
VGA cable
Operating instructions manual
9
4. User Controls - Menu Operations
4.1. RGB (& DVR) Mode
RGB Mode: General PC input mode
DVR Mode: The optimized format to synchronize a monitor and a DVR for the best resolution.
NTSC: 640x480 (60Hz), 672x480 (60Hz)
PAL: 672x580(50Hz), 800x600 (75Hz)
Press the MENU button to display the RGB menu. The follow setup menu will appears.
● RGB Menu
RGB
Volume
Contrast
Brightness
Advanced
AUTO Adjustment
Select one of the options using ▲ or ▼.
Adjust the chosen item using ◀ or ▶
Exit from item by pressing menu.
>
• Volume
Controls the output of the internal speakers.
• Contrast, Brightness
Change the contrast & brightness according to personal preference.
- Advanced Menu (pull-down menu)
Advanced
H Position is used to adjust the horizontal position of the image on the screen.
H Position
V Position
Phase
Clock
V Position is used to adjust the vertical position of the image on the screen.
Phase is adjust the focus of screen’s image.
Clock is adjust the horizontal size of screen’s image.
• AUTO Adjustment.
Choose automatically the proper horizontal position and vertical position & size of the screen image.
Press the MENU button to display the Advanced menu. The follow setup menu will appears.
● Advanced
Advanced
`
Color Temp
Alarm
Energy Saving
3D NR
Anti Burn
Recall
Source
Panel scale
>
>
<
<
>
<
<
OFF
MID
OFF
>
>
>
RGB
Full
>
>
• Color Temp is used to control color temperature. (User, Normal, Warm, Cool)
10
• Alarm is input for the alarm level (Max 5 Vdc) of sensor or any alarm device.
- Alarm menu (pull-down menu)
Enable is used ON or OFF the alarm function.
Alarm
Source select the input source the alarm screen.
Enable
Source
Time
Option
Buzzer
Volume
<
On
< CVBS1
<
10
< N.O.
< OFF
Display Type
<
>
>
>
>
>
40
FULL
>
Time is used to adjust the alarm view time.
Option selects the N.O. or N.C. mode.
Buzzer is used ON or OFF the alarm sound function.
Volume is used to adjust the buzzer value.
Display Type change the Alarm display type. (Full or PIP&Full Mode)
Note: Alarm that fit the N.O. or N.C. case an endless loop.
• Energy Saving change the Display Backlight. (OFF, Medium, Maximum) (27” only)
When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal and
the power consumption is reduced.
• 3D NR disable.
• Anti Burn disable.
• Recall the monitor original factory setting.
• Source selects between the CVBS (Composite INPUT), S-Video (Super Video INPUT), RGB (PC INPUT),
DVR, DVI or HDMI to be displayed.
● OSD Menu
OSD Menu
Language
H Position
V Position
Blending
Time
< English >
<
45
>
• Language change the OSD language according to personal preference.
• H Position is used to adjust the horizontal position of the Menu window on the screen.
• V Position is used to adjust the vertical position of the Menu window on the screen.
• Blending is used adjust the opaqueness of the background of the OSD.
• Time is used to adjust the OSD view time.
●PIP Menu
PIP
Multi Window
Sub Source
Size
Position
OFF
< CVBS1
Small
< U_L
>
>
>
>
• Multi Window is change the display type. (PIP / PBP 4:3 / PBP Full)
• Sub Source select the input source the sub screen.
• Size select the PIP sub screen display size. (Small / Middle / Large)
• Position adjust the PIP sub screen display position. (U_L / D_L / D_R / U_R)
11
* PIP / PBP working condition
Main
CVBS1
CVBS2
S-Video
RGB
DVR
DVI
HDMI
CVBS1
○
○
○
○
○
×
×
CVBS2
○
○
○
○
○
×
×
S-Video
○
○
○
○
○
×
×
RGB
×
×
×
×
×
×
×
DVR
×
×
×
×
×
×
×
DVI
×
×
×
×
×
×
×
HDMI
×
×
×
×
×
×
×
Sub
* note : RGB / DVR mode is not supported on PBP 4:3.
4.2. CVBS (& S-Video) Mode
Press the MENU button to display the VIDEO menu. The follow setup menu will appears.
● VIDEO menu
Video
Volume
Contrast
Brightness
Sharpness
Color
Tint
Under Scan
<
OFF
>
• Volume
Controls the output of the internal speakers.
• Contrast, Brightness
Change the contrast & brightness according to personal preference.
• Sharpness
Sets the desired sharpening enhancement to the picture.
• Color
Used to minutely adjust color.
• Tint
Adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows,
And is also usually set for pleasing face tones. (Appears in NTSC mode only)
• Under Scan
Adjusts the image size. (ON / OFF/ 1:1 / 16:9)
12
● Advanced Menu
Advanced
Color Temp
Alarm
Energy Saving
3D NR
Anti Burn
Recall
Source
Panel scale
>
>
<
OFF
MID
OFF
>
>
>
<
>
< CVBS1 >
< Full >
• Color Temp is used to control color temperature. (User, Normal, Warm, Cool)
• Alarm is input for the alarm level (Max 5Vdc) of sensor or any alarm device.
• Energy Saving change the Display Backlight. (OFF, Medium, Maximum) (27” only)
When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal and
the power consumption is reduced.
• 3D NR reduce the noise in the picture due to poor reception or poor picture quality. (Off/Low/Middle/High)
• Anti Burn: This is to prevent the pixel burn on LCD after the use of display for a long time.
You can turn it on in normal mode or under scan mode.
– ON in normal mode: 55minutes (normal screen) –> 5minutes (under scan screen) –> 55minutes (normal screen).
Automatically being iterating.
– ON in under scan mode: 55minutes (under scan screen) –> 5minutes (normal screen) –> 55minutes (under scan screen).
Automatically being iterating.
• Recall the monitor original factory setting.
• Source selects between the CVBS (Composite INPUT), S-Video (Super Video INPUT), RGB (PC INPUT),
DVR, DVI or HDMI to be displayed.
• Panel Scale
Change the scale. (4:3, Full)
Note: When viewing a fixed screen for an extended period of time, Residual image or blurriness may appear.
.
.
13
4.3. HDMI (& DVI) Mode
Press the MENU button to display the HDMI menu. The follow setup menu will appears.
● HDMI menu
HDMI
Volume
Contrast
Brightness
Tint
Color
Sharpness
• Volume
Controls the output of the internal speakers.
• Contrast, Brightness
Change the contrast & brightness according to personal preference.
• Tint
Adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows,
And is also usually set for pleasing face tones. (Appears in NTSC mode only)
• Color
Used to minutely adjust color.
• Sharpness
Sets the desired sharpening enhancement to the picture.
● Advanced Menu
Advanced
Color Temp
Alarm
Energy Saving
3D NR
Anti Burn
Recall
Source
Panel scale
>
>
<
<
>
<
<
OFF
MID
OFF
>
>
>
HDMI
Full
>
>
• Color Temp is used to control color temperature. (User, Normal, Warm, Cool)
• Alarm is input for the alarm level (Max 5Vdc) of sensor or any alarm device.
• 3D NR reduce the noise in the picture due to poor reception or poor picture quality. (Off/Low/Middle/High)
• Anti Burn disable.
• Energy Saving change the Display Backlight. (OFF, Medium, Maximum) (27” only)
When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal and
the power consumption is reduced.
• Recall the monitor original factory setting.
• Source selects between the CVBS (Composite INPUT), S-Video (Super Video INPUT), RGB (PC INPUT),
DVR, DVI or HDMI to be displayed.
• Panel Scale
Change the scale. (4:3, Full)
Note: Not support HDCP (High-bandwidth Digital Content Protection) compliance.
14
5. Specification
27.0" Color LED Monitor
NO.
ITEM
SPECIFICATION
1
LED Panel
27.0" LED Panel
2
Active Display Area (Diagonal)
27.0 inches
3
Pixel Format
1920(H) x 1080(V), RGB Vertical Stripe
4
Pixel Pitch
0.31125mm x 0.31125mm
Color Depths
16.7M Colors
5
6
LED
Contrast Ratio
5000 : 1 (Typical)
7
Brightness
300 cd/m2
8
Viewing Angles (Left/Right/Up/Down)
89°/ 89°/ 89°/ 89°
9
Light source / Lifetime
LED 4 Strings x 18 Pcs / 30,000 Hours (Minimum)
10
Response Time (Tr/Td)
12ms
11
Video Mode
NTSC/PAL (Auto Selection)
12
Video Input Signal
13
14
Video
15
Video Input Connector
Composite
1.0Vp-p, 75Ω
S-Video
0.7Vp-p(Luminance), 0.3Vp-p(Chrominance), 75Ω
Composite
BNC x 2
S-Video
4Pin Mini Din x 1
16
Termination
75Ω, Auto Termination
17
Resolution
More than NTSC / PAL 650TVL
18
Input Signal
Analog RGB (0.714Vp-p, 75Ω), H&V Sync(TTL)
19
Input Connector
15 pin D-sub
20
VGA 640 x 480 60~75Hz
21
PC
22
(RGB)
SVGA 800 x 600 56~75Hz
Input Resolution
XGA 1024 x 768 60~75Hz
23
SXGA 1280 x 1024 60~75Hz
24
Full HD 1920 x 1080 60Hz
25
26
27
28
29
30
31
32
33
Plug & Play
DVI
HDMI
DDC 1/2B
Input Signal DVI
Input Connector DVI-D
Input Signal HDMI
Input Connector 19 pin HDMI (Digital)
Input Resolution
Max 1920 x 1080, 60Hz
Alarm Input
Audio
Max 5Vdc (N.O. / N.C.)
Input
Stereo Jackx1, 2-Teminal RCAx1
Output
2x 5W
Dimensions (W x H x D)
Net
635.5 x 395.7 x 42.0mm
Packing
750 x 515 x 220mm
34
Weight (Net/Packing)
7.2 / 10.2 Kg
35
Operating Temperature
0 ∼ 40 ℃
36
Storage Temperature
0 ∼ 50 ℃
37
DC Power
12VDC ±5% @ 5A
38
Power Consumption
50W
39
User Controls
Brightness, Contrast, Tint, Color, Sharpness, PIP etc.
40
OSD Language
English/German/French/Spanish/Italian/Polish/Czech
41
Case Material
Metal
42
Accessories
AC Adaptor, Power Cord, VGA Cable, Manual
43
Option
IR Remote Controller
15
32.0" Color LED Monitor
NO.
ITEM
SPECIFICATION
1
LED Panel
32" LED Panel
2
Active Display Area (Diagonal)
32.0 inches
3
Pixel Format
1920(H) x 1080(V), RGB Vertical Stripe
4
Pixel Pitch
0.36375mm x 0.36375mm
Color Depths
16.7M Colors
Contrast Ratio
3000 : 1 (Typical)
7
Brightness
350 cd/m2
8
Viewing Angles (Left/Right/Up/Down)
89°/ 89°/ 89°/ 89°
9
Light source / Lifetime
LED / 30,000 Hours (Minimum)
10
Response Time (Tr/Td)
6.5ms
11
Video Mode
NTSC/PAL (Auto Selection)
5
6
LED
12
Video Input Signal
13
14
Video
15
Video Input Connector
Composite
1.0Vp-p, 75Ω
S-Video
0.7Vp-p(Luminance), 0.3Vp-p(Chrominance), 75Ω
Composite
BNC x 2
S-Video
4Pin Mini Din x 1
16
Termination
75Ω, Auto Termination
17
Resolution
More than NTSC / PAL 650TVL
18
Input Signal
Analog RGB (0.714Vp-p, 75Ω), H&V Sync(TTL)
19
Input Connector
15 pin D-sub
20
VGA 640 x 480 60~75Hz
21
PC
22
(RGB)
SVGA 800 x 600 56~75Hz
Input Resolution
XGA 1024 x 768 60~75Hz
23
SXGA 1280 x 1024 60~75Hz
24
Full HD 1920 x 1080 60Hz
25
26
27
28
29
30
31
32
33
DVI
HDMI
Plug & Play
DDC 1/2B
Input Signal DVI
Input Connector DVI-D
Input Signal HDMI
Input Connector 19 pin HDMI (Digital)
Input Resolution
Max 1920 x 1080, 60Hz
Alarm Input
Audio
Max 5Vdc (N.O. / N.C.)
Input
Stereo Jackx1, 2-Teminal RCAx1
Output
2x 5W
Dimensions (W x H x D)
Net
734.4 x 458.0 x 54.0mm
Packing
855 x 575 x 215mm
34
Weight (Net/Packing)
10.4 / 13.7 Kg
35
Operating Temperature
0 ∼ 40 ℃
36
Storage Temperature
0 ∼ 50 ℃
37
DC Power
24VDC ±5% @ 2.7A
38
Power Consumption
65W
39
User Controls
Brightness, Contrast, Tint, Color, Sharpness, PIP etc.
40
OSD Language
English/German/French/Spanish/Italian/Polish/Czech
41
Case Material
Metal
42
Accessories
AC Adaptor, Power Cord, VGA Cable, Manual
43
Option
IR Remote Controller
16
7. REMOTE CONTROL
1. Mute
Cuts off the sound
2. Power
Power on / off
3. Panel Scale
Change the scale.
4. Display
Display the screen information
5. Freeze
Freezes the screen temporarily
6. PIP
Multi window activate or cancel
the PIP function
7. Exit
Exit the OSD menu
8. Auto
Auto adjust the H/V POS, H/V
SIZE, Phase
9. Left / Right Keys
Decreases / increases the
chosen item
10. Up Key
Moves up the menu lists in the
OSD / Selected Volume.
11. Menu
Turns the OSD menu on / off
12. Down Key / Brightness
Moves down the menu lists in the
OSD / Selected brightness
13. Under Scan
Adjust the image size
14. Source
Select the sources
15. Not used
17
MEMO
MEMO
Security Color LED Monitor
Printed in Korea
50303101A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement