www.laviewsecurity.com

1

We recommend testing all the cameras and cables prior to installation.

4

VIDEO IN

1

3

2

4

HDMI

*

12VDC Required if PoE not available

VGA

IN

IN

USB

LAN

USB

Wireless Router

LAN

Not Included

OPTIONAL

HDTV

1080p

HDMI

2

PC Monitor

OR

VGA

1920x1080

USB

Power Cable

3

Mouse

QUICK START GUIDE

•

•

1

Connect your cameras

Connect the Cat5e cable into the camera

Connect the other end of the Cat5e cable into the NVR PoE port.

(Repeat for all cameras)

•

2

Connect to your monitor/TV

Connect your NVR and TV/monitor with a HDMI or

VGA cable (Not included)

Note: Your monitor/TV must support the output resolution of the

NVR or you may get a black screen or a possible error message. You cannot use a laptop as a display.

•

•

3

Connect the mouse and power

Connect the mouse to the USB port

Connect the NVR power cable to the NVR

4

Connect to your network

(OPTIONAL)

• Connect the LAN port on the NVR to the LAN port on your router via an Ethernet cable for remote viewing on your mobile phone, tablets, PC and Mac

• You can also add existing IP cameras to your NVR from your network.

Note: The NVR will still work as a standalone video recorder if you do not have internet connection and skip this step.

•

5

Configure the start up wizard

The connection is now completed. Turn on the power switch and follow the start-up wizard on your screen to configure the NVR. (Next Page)

5

Select the screen resolution from the drop-down menu based on your TV/monitor’s resolution.

Resolution

System Resolution: 1024 * 768/60HZ

Check this box if you wish to see this wizard again after you reboot your system.

Wizard

Start wizard when device starts?

We strongly recommend that you change the default

Admin password ‘abc12345’ for better security protection.

Wizard

Admin Password

New Admin Password

New Password

*****

Select the applicable time zone, date/time format, and time.

Wizard

Time Zone

Date Format

System Format

System Time

(GMT-08:00)

MM-DD-YYYY

09-29-2014

18:14:37

We recommend checking ‘Enable DHCP’ even if your NVR is not connected to the internet, this will automatically get the NVR

IP address.

Wizard

NIC Type

Enable DHCP

IPv4 Address

10M/100M Self-adaptive

192.0.0.64

The wizard will show additional network information, click ‘Next’ to proceed.

Wizard

Server Port 8000

HTTP Port 80

RTSP Port 8554

To initialize the hard drive click the ‘Init’ box otherwise the

NVR will NOT record.

Wizard

Capacity Status

1 Normal

Property Type

R/W Local

Free Space

464GB

If you wish to add an IP camera click ‘Search’ otherwise, click ‘Next’ to proceed.

Wizard

IP Address Amount Model

1 192.168.1.36

1 CMIP3412

Choose continuous or motion detection recording from the listed options. Check the ‘Start Recording’ box to initialize recording. the wizard.

Start Recording

Continuous

Motion Detetction

Wizard

1 DVRPowerAdapter

What is in the box?

Netowrk Video Recorder

High Definition IP Cameras

Pre-made Cat5e Cables

Remote Control

Mouse

NVRPowerCable

Utility Disc

Quick Start Guide

Warranty Card

Security S ckers

1 2 3

10

4 8 7 6 5 9 11 12

1 Power LED Indicates if the NVR is powered on

2 Status LED Indicates if the Hard Drive is working

3 Tx/Rx LED

4 Video In

5 USB Port

Indicates if the Network is active

Connects cameras via cat5e cables

6 HDMI Port Connects to HDTV or computer monitor

7 VGA Port Connects to TV or computer monitor

8

9

Audio I/O Connects an extra microphone/speaker

(not included)

LAN Connects to your router

10 Alarm Alarm input/Output

11 AC Power Connects the Power Supply

12 Power Power Switch

Troubleshooting

Problem

No display/No signal/Invalid format .

.

.

.

.

No picture/No video

Cannot log in

.

Camera picture is not clear

Night vision is not working

DVR is not recording

.

.

.

.

.

.

Solu on

Make sure the VGA/HDMI cable is properly connected to both the NVR and TV/monitor

NOTE: A laptop cannot be used as a screen

Make sure your TV/monitor is on the correct video input (e.g. HDMI1, HDMI2, etc.)

Try switching to another 1080p TV/monitor and adjust the output resolu on in the DVR menu

On the front of the NVR check that the power LED light is on

Make sure the camera is camera is properly connected to the PoE port on the NVR or network switch. If the camera does not support PoE or you are connecting it to a non-PoE switch, you will need additional 12VDC power supply for the camera

The default user name is: admin and the default password is: abc12345. If you don’t remember your old password, please submit a cket to us at www.laviewsecurity.com

Make sure the camera is not placed behind a window, there is no interference or a strong light source in front of the camera

In NVR Menu>Record> all channels

, set the sub stream resolu on to CIF for

Move the camera to a different loca on and/or direc on

NOTE: The live view (sub stream) resolu on is NOT the actual image quality recorded (Main stream); Connec on of excessive length (over 300 )of cat5e cablewill drop the camera image quality; Working at extreme weather condi on (below -22F or above 140F) will drop the image quality and damage the camera.

The infrared ac vates automa cally when the environment is dark enough. You can check that the camera infrared bulbs are working properly as they turn light red in dark environments

Check that the hard drive status is normal and is ini alized under the Main

Menu>HDD>General

Enable the record mode (Normal or Mo on Detec on) under the Main

Menu>Record>Schedule>Edit for the selected camera

Premium IP NVR System

QUICK START GUIDE

Remote Viewing

View footage on your mobile devices with our app. You can either scan the provided QR code below or search LaView Net in the app store. Then scan the QR code located on the NVR for device P2P info.

LaView NET

SCAN ME and hard drive capacity.

Questions?

Call us at:

626-898-4988

(M-F from 9am to 6pm PST)

Open support ticket at: www.laviewsecurity.com

Complete user manual can be viewed via included CD disc or can be downloaded at: www.laviewsecurity.com

Copyright © LaView Eagle-Eye Technology Inc. 2016