Q-66

Device Overview

Q-Band EX

User Manual

EN

Reversible Wristband

Touch Button

How to wear your Q-Band EX?

1

Wear Q-Band EX on your wrist

Core

Clasp

Metallic contact for charging

2

Fasten Q-Band EX with clasp

Put on the wristband with the screen facing up and the band wrapped around your wrist. Slide one band through the loop of the other band, and align the clasp along the band to find the holes where best fit the clasps.

3

Charge your Q-Band EX

1

2

3

Squeeze both clasps into the holes on the wristband until you hear a click, indicating the band is securely fastened.

Note: The watch band is replaceable and both side wearable/reversible.

4

1

Change the wristband

2

To charge your Q-Band EX, place it in the charging box at the other end of the USB cable. Close the box afterwards, and make sure the Q-Band EX is securely covered. Plug the

USB connector to either a PC or power adapter to start charging.

1. Spread open both bands with the screen facing up, and press down the screen with your thumb until the core comes off the wristband.

2.

Insert the core with screen facing up into the notch from below the wristband.

Make sure the two tenons on each side of the core are securely fixed into the corresponding slots in the bands.

Important Notice:

Failure to follow the instructions above might cause damage to the device.

Q-66

Q-Band EX

Get started with Q-Band EX

1

Download and Install i-gotU Life app

Please download i-gotU Life app from Google Play or the App Store and have it installed on your smartphone: https://play.google.com/store/apps/details?id=com.mobileaction.ilife

http://appstore.com/igotulife

Apk download: http://global.mobileaction.com/download/apk

Supported device

•

•

•

Any Android smartphone (v4.3 and up) with built-in 4.0

Bluetooth connectivity; or iPhone 4s and later models, iPad 2 and later models, and iPod Touch (all with iOS version 7.0 and up).

A complete list of supported smartphone or mobile devices can be found at: http://ww2.voiis.com/qband/devices.html

User Manual

2

Set up Q-Band EX

Your Q-Band EX can be configured directly on the i-gotU Life app.

First time setup:

1.

2.

Open the i-gotU Life app.

Setup Wizard will be launched automatically.

Follow the on-screen instructions to proceed with more settings.

Set up a new device from Settings:

2.

3.

4.

5.

Open

Tap

the i-gotU Life app.

Tap the app icon at the upper left corner to open

Choose Settings .

Setup New Device under function menu

MORE DEVICE SETTINGS .

.

Note

Your personal information is used to calculate your Base Metabolic

Rate (BMR), which determines your calories burned.

3

Start Using Q-Band EX

1. Switch between different function modes

1. Tap the button twice to wake up the device screen.

2. Long-press the button on the Q-Band EX until you see 4 icons

on the screen for mode selection.

3. Tap the button twice to switch mode.

4. You’ll be entering the selected mode in 3 seconds.

2. Change display information

Information shown on the screen will vary as you press the button on the Q-Band EX to toggle between screens.

3. Q-Band EX modes

Daily mode: Analyzes your daily data, including steps taken and calories burned.

Sleep mode: Tracks your sleep pattern and quality.

Sports mode: Starts a workout and displays information including duration, steps taken, calories burned and distance traveled during the workout.

Nap mode: Awakes you via vibration after a short nap.

4. Icon description

Date

Connection Status

Current Mode

Overall Progress (the average of Calories + Steps)

Battery Status

4

Features of Q-Band EX & i-gotU Life App

Silent Alarm

Silent alarm of Q-Band EX gives you a wake-up alert via soft vibrations.

While in the sleep mode, the alarm can be dismissed by long-pressing the button on Q-Band EX. By pressing the button once, the alarm will not be dismissed but alert you again in 5 minutes. Alarm settings can be changed in: open i-gotU Life app > Menu > Silent Alarm .

Notification

You will be notified with incoming calls, SMS, E-Mail, or alerts from the social apps via vibration. When notified about an incoming call on an

Android smartphone, you may reject the call by long-pressing the button on Q-Band EX. Notification can be set up from: i-gotU Life App

Menu -> Notification .

Online Help

Android: http://ww2.voiis.com/igotu-life/help.html?language=en iOS: http://ww2.voiis.com/igotu-life/help.html?language=en&platform=ios

Manual download http://www.mobileaction.com/download/Q-Band_download.jsp

Important Notice

1. Please make sure your Q-Band EX is fully charged when used for the first time. It takes about 2 hours before it is fully charged.

2.

Although the device is usable in the rain, its use under water is prohibited. Please avoid showering or sauna/steam bathing because high temperature, steam and water jet may cause damage to the device.

3.

Please do not use any corrosive chemical to clean the device.

4.

The built-in Li-Polymer Battery might be damaged if it remains low voltage for a long time. It is suggested that you charge the battery once every three months to prolong the battery's lifetime, even though you don't use the device very often or do not plan to use it for a while.

WEEE

Note on environmental protection:

After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies:

Electrical and electronic devices may not be disposed of with domestic

Waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.