Short Catalogue - 2ar

Short Catalogue - 2ar
2AR
Rg2i
Groupe
2AR
MEASUREMENT
INSTRUMENTATION
PANEL
MOUNTING UNITS
CONVERTERS
AND INTERFACES
Short
Catalogue
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Groupe
Interfaces pour
l’informatique
industrielle
Produits et Solutions en Communication Industrielle
Acquisition de Données et Transport de l’Information
5 Rue Edmond Charpentier - 42000 Saint Etienne - France
Tél: +33 (0) 4 77 92 03 56 - Fax: +33 (0) 4 77 92 03 57
Internet: http://www.rg2i.fr Email: [email protected]
2
High technology
for Industrial
Automation
Established since nearly 20 years in industrial automation, SENECA has achieved a leading position in control instrumentation and
industrial process. The Seneca strengthness are nonstop innovation, reliability and technical quality. Our product lines for the automation, entirely and internally designed and produced, are compatible with open and more widespread technological standards.
SENECA proposes a wide range of products and systems with
high value added, from the instrumentation field up to the products for monitoring and control, a basket that includes interfaces, conditioners, acquisition and control systems and display for
data visualization.
INDEX
3
1 • DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
7
14 Z-PC Line
Z-PC Line
Telecontrol Units
15
Distributed I/O
Systems
20 Z-PC Line
Z-PC Line
Communication
Modules
23 Z-PC Line
Distributed I/O
Systems
25
Software
and
accessories
2 • CONVERTERS AND INTERFACES
27
33 Z Line
K Line
Isolators converters,
6,2 mm case
Isolators converters for
electrical measurements
36 T Line
Modular Isolators
converters, 17,5 mm
case
38 S Line
44 S Line
Isolators converters with
power supply
115 / 230 Vac
38
Loop powered
transmitters
47 S400
Power Supplies
50
Protections
against
Overvoltages
3 • DISPLAYS
S401
51
54 S Line
ModBUS
Display
with OLED
technology
S Line
LED Totalizers
56 S Line
LED Totalizers
& Indicators all-in-one
60 S Line
61 S Line
Batch Controllers
59
LED Displays
61 ZTOP
Pump Controller
62
Touchscreen Operator
Panels
4 • MEASUREMENT DEVICES
Test-3
Handheld
Multimeter
and Signal
Generator
65 Datalogger
63
65 Pt100 Probes
65 Advanced Network 66 Universal Advanced 66
Analyzer for Back
Panel Mounting
Network Analyzer
with Display
4
SENECA takes care
of your signals...
Compact Isolators
and Converters
Modular Isolators
and Converters
Ethernet
Gateway
and Telecontrol
Units
5
Distributed
I/O System
Distributed
I/O System
Displays,
Totalizers, Batch
Controllers
LED
OLED
6
Full Control of the Product
Life Cycle
DESIGN
SENECA has an advanced internal structure of electronic design that follows all the steps of the product development, analysis and feasibility studies, applied research, PCB and SMT design activities with the best software for simulation and industrialization prototyping electronics and
mechatronics, documentation and operating manuals. This structure also
carries on consultancies and achievements of electronics contract basis.
The SENECA design reserves its full attention for finding components
and normative adjustment. Testing, analyzing interference, electromagnetic compatibility test, signals security and integrity - EMI are conducted by internal and external (qualified) laboratories for comparison tests.
The SENECA design is in step with the more advanced microelectronic
technologies (FPGA, PSoC, CPLD, ASIC, DSP, MEMS, LVDS,
VHDL),adopting a systematic approach of quality control (ISO
9001:2000, DoE methods, FTA, FMEA) and statistical analysis.
PRODUCTION
The production cycles and the internal tests are executed through the
most modern SMT lines (Surface Mounting Technology) and PTH (Pin
Through Hole). The capacity of our factories is thousands of components
per hour, which allows to combine high production speed, accuracy, flexibility, reduced MTBF and time-to-market. The production process is
fully conform to the environmental directives and eco-conform to the
TAEE, ROHS and REACH certifications. On all products shall be carried
out stringent test systems with automatic generation of individuals Test
report. In order to handle the increasing complexity of SMT technology
on electronic cards SENECA adopts Convention forced to recast that
process control systems for welding up to the management of fluxing
through a precise and accurate control of heat transfer. All products
comply with CE for electromagnetic compatibility, the safety requirements and regulations RINA, UL - UR - CSA for naval applications and
for the North American market.
7
1
DISTRIBUTED
I/O MODULES
AND REMOTE
CONTROL SYSTEMS
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
8
Z-PC line, open system,
configurable and standard
Digital Input
Analogue Input and Output
• Acquisition and control standard analog signals
(voltage, current, ohm), power supply, transducers, resolution up to 15 bit + sign
Digital Output
• Isolated input for reed sensors, proximity, pnp, npn,
contact, inputs with fast counters up to 32 bit and 10
KHz
• SPST relay output or MosFET, delay
and fail safe programmable, front diagnostics
Special Modules: temperature control, load cells,
electric network analyzer
Connection System
and power-supply
• Direct input from RTD 2, 3 or 4 wires
• Thermocouples acquisition J, K, R, S, T, B,
E, N
• Electrical measurements acquisition from
net analyzer
• Load cell (strain gauge) acquisition
• Supports in nylon loaded PA6 with fiber glass at 30%
• Hot swapping
• Power-supply terminal /data line
• Mounting on guide-DIN 46277 in vertical position
Modular CPU and multi-functions
• PLC, Web Server, RTU, datalogger, Ethernet bridge
• ModBUS Master / Slave on RS232/RS485
• RS232 interfaces (user free/programming)
• Ethernet Port 10Base T opened to supervision networks
and remote connection
• RISC / MISC Microprocessor at 32/64 bit
• Memories: up to 32 MB RAM, 64 MB flash memory (data)
• Backup battery for retentive variables
Communication Interfaces
• Radio modules with short range 100 kbps, 10
mW, 434-869 MHz
• RS232-USB/RS485 serial Conversion Modules
Regulators
• Analogue: Z-PID, universal input, proportional,
integral, derivative action settings
• Digital: Z-D-IO, module 6 DI, 2 DO, I/O slave or
automatic functioning for pneumatic valves,
motorized and alarms management
Ethernet
Fieldbus
Serial Connection
• Html/Java Web Client
• LAN-Ethernet / ModBUS TCP
• Architetture Client/Server e VPN
OPC
SCADA
System for GSM/GPRS,
• Communication
DSL PSTN, WiLAN, UHF …
operator panels, identification
• Printer,
systems
Distributed system, supervisory and control integration
•
I/O expansion
• PLC, regulators and field devices
ModBUS RTU Master/Slave
Profibus DP (Slave)
CanOPEN (Master)
Data transmission and remote control system
Max 32 I/O modules, 1.200 m without repeater
434 / 869 MHz
100 kbps
Max 32 I/O modules, 1.200 m without repeater
RS232
RS232 / RS485
ModBUS RTU - RS485
RS232 / RS485
ModBUS RTU - RS485
Z-TWS
Z-TWS
GSM / GPRS /
PSTN / XDSL…
LAN /
WAN /
Internet
LAN /
WAN /
Internet
Ethernet - ModBUS TCP
Ethernet - ModBUS TCP
LEGEND
LEGENDA
Fieldbus / Control networks
Fieldbus / Control networks
Serial connections
Serial connections
LAN / WAN
LAN / WAN
9
Z-PC LINE • DATA ACQUISITION
RS232 / RS485
ETHERNET - MODBUS TCP / RS485
WIRELESS TRANSMISSION
RS232
Ethernet /
ModBUS TCP
Z107 - Serial
Converter
RS232/485
100 kpbs 10 mW
434 (869) Mhz
max 300 m
Ethernet /
ModBUS TCP
Z-TWS
Z-BRIDGE
Z-RTU
ModBUS RTU / RS485
ModBUS RTU / RS485
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-PC LINE for data acquisition allows the implementation of systems able to collect, process and store analog or digital
measures from industry and T&M with simple Plug&Play technology on the monitoring side and the distribuited I/O
ModBUS on the field side. Moreover Data Recorder (data acquisition software) Z-PC Line can be a data acquisition platform joined to more popular tools and standard.
ModBUS RTU / RS485
Z-PC Line,
I/O
Acquisition
modules
Z-PC Line,
I/O
Acquisition
modules
Z-PC Line,
I/O
Acquisition
modules
ModBUS RTU / RS485
CONVERTERS
AND INTERFACES
Net analyzer
LabVIEW
DATALOGGING
Z-TWS
BASED
PANEL
MOUNTING UNITS
DATA
RECORDER
END OF
LINE TEST
CALIBRATION AND
LABORATORY TEST
ELECTRIC CONSUMPTION
ANALISYS
TEMPERATURE
MONITORING
DATA ACQUISITION
PORTABLE KIT
TESTING ROOM
CAPACITY
TEST
DATA ACQUISITION
AND RECORDING
PROCESS ENVIRONMENT
MONITORING
WATER TREATMENT
CONTROL
MEASUREMENT
INSTRUMENTATION
APPLICATIONS
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
10
Z-PC LINE • TELECONTROL
Z-PC line is designed to support the systems integrators, design and engineering companies, automation, instrumentation
and specialists, electrical engineers. It ensures open technology, high connectivity in the data transmission toward and from
the remote centre. The configuration software (Z-NET3) offers a wide range of “ready-to-use” functions for remote control
(alarms, files, events management via SMS, e-mail, voice etc.) and automation (pumps rotation, counter, pulses totalizer,
flow metering etc.).
WATER TREATMENT
AGRICULTURE/
CLIMATIC
ENGINEERING
WATER DISTRIBUTION
GAS
GSM/GPRS
PRS
RS
ENVIRONMENTAL
MONITORING
UMTS
S
IINTERNET
CD
DN-DEDICATED
DICATED
D LINE
CDN-DEDICATED
D
ADSL X DSL
FIBER OPTICS
ETH
HERNET
ETHERNET
S
ATELLITE
E
SATELLITE
SERIAL
SERIAL LINE
LINE
RADIO UHF
UH
UHF/VHF
PSTN
WLAN
PUBLIC
SERVICES
ENERGY
TRAFFIC AND
TRANSPORT
INDUSTRY, MECHANICS
BUILDING
AUTOMATION
AND SAFETY
TELECONTROL INTEGRATED FUNCTIONS
ALARMS MANAGEMENT
READY-TO-USE
FUNCTIONS
LOG FILE
• Automatic alarms sending via SMS up
to 8 phone numbers
• Call from devices to the supervision
centre according to an alarm/event
• Users Automatic Management
• Hours Counting Functioning
• Counters and Totalizers
• Offset and Flow Counting
• Data log data transfer via FTP, SMTP
(email), pre-setted trip alarms
• Point-to-Point connection via GSM
data channel
• Status Request (analog/digital measures) via SMS
• Commands sending via SMS
• “Always On” Connections
Management
• Connection to SENECA Rtu via public
server FTP (on internet)
• Connection to Master remote stations
with public & dynamic IP and blocked
ports in input
• Virtual Network Creation via internet
• Connection via Ethernet or GPRS router
• Point-to-Point Tunnel Creation for sure
and reliable data transmission
11
Z-PC LINE • RENAWABLE ENERGIES AND ENERGETIC EFFICIENCY
NETWORK
ANALYSIS
REMOTE MANAGEMENT
AND MONITORING
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Concerning the renewable sources and quality control of energy, SENECA proposes several solutions and products. The
Z-PC line modules are galvanically isolated from network voltage and protected from overvoltages and overcurrents. They
can also be locally and remotely configured for switching/switching off, automatic data sending, reducing consumptions of
electric energy and optimization of maintenance costs.
REGULATION
SYSTEMS
CONVERTERS
AND INTERFACES
ISOLATION
AND PROTECTION
Z-PC LINE is a general-purpose system for the management of process and batch automations. The ModBUS, CANopen
and Profibus interfaces allow an easy integration with other devices and existing systems. The IEC 61131-3 programming
(with Isagraf or CoDeSys platforms) gives the maximum flexibility in the implementing of control logics, regulations, metering, alarms and trend management of automatic machines and systems.
PROGRAMMING
PANEL
MOUNTING UNITS
Z-PC LINE • AUTOMATION AND PRODUCTION CONTROL
ETHERNET
SUPERVISION
HMI-SCADA
AUTOMATION
FUNCTIONS
MEASUREMENT
INSTRUMENTATION
COMMUNICATION
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
12
Z-PC Line software architecture
Scada, windows runtime software, database…
Trend Viewer
DATA RECORDER
IEC 870-101 / 104
integrated protocols
Communication standard for electricity industry (serial and Ethernet)
Data acquisition and recording
software
Z-NET3
WEB EDITOR
System configurator (IEC61131)
Development Environment for
supervision html/java page
CPU and I/O
configuration
Database generation
and update
Z DATA STORE
Data management, files and
Micro RTU communication
Remote data acquisition and communication scheduling for Telecontrol systems
OPC Server I/O
(GPRS-IP connections with
dynamic IP, driver ModBUS)
PANEL
MOUNTING UNITS
OPC Server MB Slave
(high security GPRS connections, “ready to use” system
for IP static nodes)
PLC PROGRAMMING [IEC 61131]
Isagraf
Telecontrol
Integrated Functions
Codesys
ModBUS Integrated
Functions
CONVERTERS
AND INTERFACES
OPC Server standard
Ethernet
OPC Server
SENECA
Libraries
Communication
Network Configuration
Power consumption, working
hours counting, motors rotation
etc.
RS232 / RS485, TCP/IP, PPP
MEASUREMENT
INSTRUMENTATION
Z-NET RTU
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
13
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
14
Z-PC LINE • RTU
Z-RTU
M-RTU-GP
M-RTU-PC
Z-GPRS
Remote Terminal Unit 16 (8) DI,
8 (4) DO, 4 (2) AI, 2 (1) AO with
GSM/GPRS or PSTN modem
Micro RTU for general
purpose
Micro RTU for cathodic
protection
GSM/GPRS – RTU with
ModBUS interface
ELECTRIC FEATURES
Power supply
10-30 Vdc
Battery Life-Time
Power Consumption
Protection Degree
7 W min, 15 W max, 11 W (GSM idle)
IP20
12..40 Vdc or 12..28 Vac (50-60Hz)
Range 8..30 Vdc
Internal batteries
14,4 V lithium batteries (optional)
3 years
6..50 mW, 1,5 W (GSM transmission)
External Case IP44
Internal Case IP65
Connection IP40
Range 8..30 Vdc
Internal batteries
14,4 V lithium batteries (optional)
3 years
6..50 mW, 1,5 W (GSM transmission)
External Case IP44
Internal Case IP65
Connection IP40
-20..+70 °C (max stability 0..35°C)
65 x 130 x 55 mm
350 g
ABS UL 94V0
DB9F, V4 RS232 interface
SMA socket (antenna connector)
I/O connectors: M6/ Cage
-20..+70 °C (max stability 0..35°C)
263 x 143 x 89 mm
2 Kg (batteries included)
ABS UL 94V0
DB9F, V4 RS232 interface
SMA socket (antenna connector)
I/O connectors: M6/ Cage
-20..+70 °C (max stability 0..35°C)
110 x 112 x 17,5 mm
140 g
Nylon 6 with 30% glass-fibre, V0 self-extinguished class
DB9F Frontal Connection
IDC10 Back Connector
1 port with UART GSM
1 serial port V24-RS232, half-duplex, local
connection, selectable speed: 1.200..
115.200 baud
GSM Dual band full type approval
1 port with UART GSM
1 serial port V24-RS232, half-duplex, local
connection, selectable speed: 1.200..
115.200 baud
GSM Dual band full type approval
RS232 – GSM max speed 115 Kbit/s
RS485 GSM integrated, max speed 115
Kbit/s, isolated
RS485 ModBUS Slave, selectable speed
GSM/GPRS Quad-Band Module
Frequency: 850/900/1800/1900 MHz
Voice, Data, SMS
32 bit, core ARM7, 2 UARTS, low power
EEPROM: 64 kB
Flash: 2 MB
32 bit, core ARM7, 2 UARTS, low power
EEPROM: 64 kB
Flash: 2 MB
1,2 W
IP20
THERMOMECANIC FEATURES
Operating Temperature
Dimension (w x h x d)
Weight
Enclosure
Connections
-10..+55 °C (suggested)
185 x 242 x 36,90 mm
875 g
Aluminium
Removable Terminal Block, max wire size
2.5 mm2
COMMUNICATION, PROCESSING, MEMORY
Communication Ports
Modem
CPU
Memory
1 Ethernet:
1 RS232/RS485 programmable
1 RS485 Modbus for serial expansion
1 RS232 Debug/User
Dual band GSM 900/1800 MHz (optional
tri-band), full type approval, GPRS class 8
PSTN, ITU-T V.90/ 56 k, ITU-T V.34
RISC 32 bit – 20 MIPS
RAM: 8MB, 64 ritentive variables
Flash memory (data): 16 MB
RAM: 1MB
Flash: 4MB
SOFTWARE, SIGNALS, MEASUREMENT
System Protocols
Digital Input
Analog Input
Digital Output
Analog Output
ModBUS RTU Master (on RS485)/ Master ModBUS RTU RS232 (CCITT V.24), transSlave (on RS485/RS232), PPP, HTTP, FTP, mission parameters: 1 bit start, 8 bit data, 1
SMTP, (ModBUS) TCP/IP
bit stop, no parity
Dedicated protocol via SMS
Nr 16 (8) channel (internal/external power Nr 4 isolated channels, sampling frequency
supply), power transducers, isolated chan- 10 Hz, power transducers
nels (1500Vac)
Nr 4 (2) isolated channels (14 bits resoluNr 2 isolated channels power transducers
tion, loop power), voltage (0..5/ 0..10 / 1..5 / Range: ±2 V, ±20 V, ±50 V, ±20 mA
2..10 V), current (0..20 / 4..20 mA), power Resolution: 15 bit + sign
transducers, isolated channels (1500Vac)
Nr 8 (4) channels (SPDT relay,
Nr 2 relay; Contact rating: 30 Vdc – max 1
capacity 5A 250 Vac), LED signalling
A (resistive load)
Nr 2 (1) channels (12 bits resolution), voltage
(0..10 / 2..10 V), current (0..20 / 4..20 mA)
ModBUS RTU RS232 (CCITT V.24), trans- ModBUS RTU
mission parameters : 1 bit start, 8 bit data,
1 bit stop, no parity
Dedicated protocol via SMS
Nr 2 isolated channels, sampling frequency N° 2 isolated channels, power transducers
10 Hz, power transducers
Nr2 isolated channels power transducers
Range 1: ±2, ±20, ±50 V, ±20 mA
Range 2: ±2, ±20, ±50 V
Resolution: 15 bit + sign
N° 2 isolated channels
power transducers
I/O Acquisition & Datalogging
SMS free transmission
Data / SMS connections from supervisor
Dedicated Functions
Automatic daily log sending
I/O Acquisition & Processing
SMS free transmission
Data / SMS connections from supervisor
Dedicated Functions
Automatic daily log sending
Development environment Python
GSM/GPRS functions, telecontrol, SMS
routine management, data log, e-mail, DIPswitch
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
CEI 110-24, CEI EN 61293, CEI EN 60529, CE, EN 61000-6-4/2002, EN 61000-6UNI EN 12954, UNI 10950, UNI EN 11094 2/2005, EN 61010-1/2001, en 60742
FUNCTIONS & SETTINGS
Programming / Mode
Norms
Z-NET configurator
PLC (IEC 61131 - Isagraf)
Z-NET RTU (telecontrol)
OPC Server (data exchange)
Web Server (html / java monitoring)
Datalogger / trend
EN 50081-2, EN 55011, EN 50082-2, EN
61000-2-2/4, EN 50140/141, EN 61010-1,
EN 60742, EN 61000-6-2
ORDER CODES
Code
Model
Z-RTU-1
Z-RTU-2
Modem
-GSM
-PSTN
Options / Extensions
-SMART-SPEECH
-PROFIBUS-DP
-CanOPEN
-IEC 870
Software
Accessories
ORDER CODES
Description
Full I/O (16 DI, 8 DO, 4 AI, 2 AO)
Half I/O (8 DI, 4 DO, 2 AI, 1 AO)
GSM/GPRS Modem integrated full type approval
PSTN Modem
Smart speech Board, vocal alarms
Profibus DP Slave Board
CANopen Master Board
IEC 870 protocols
Pg. 25
Pg 26
Code
Model
Software
Accessories
Description
M-RTU
Micro RTU, basic version for general applications
M-RTU GP
Version for general applications + GSM antenna and batteries
M-RTU-PC
Version for cathodic protection + GSM antenna and batteries
Z-NET3
IEC 61131 system configurator
Z-DS
Z Data Store. Software for SMS management, data/control, files
OPC Server I/O OPCServer with functionality for file log download
BATTHP
HP Batteries, lithium batteries, 14.4V, 18500 Ah
CASS01
Case for external application (type shell)
CASS02
Case for external application
CASS03
Case for external application with IP65 protection
A-STIL
Antenna
A-GSM
GSM External Antenna, dual band swing cable 3,2 m
PM002490
Programming Serial Cable RS232 M/F
PM002500
RS232 null modem serial cable (firmware update)
S-DIN
DIN rail mounting support
15
Z-TWS-3
Z-TWS-64
Z-LWS
Muti-function Control
Unit
Muti-function Control Unit
Isagraf / CoDeSys
Muti-function Control
Unit 64 bit
Micro PLC
10..40 Vdc
19..28 Vac / 50-60 Hz
3.5 W
1.500 Vac
Ethernet Connection
Power Supply
PLC On
Ethernet link
II
2
IP20
0..+55 °C
-20..+70 °C
30..90% a +40 °C (non condensing)
17.5 x 100 x 112 mm
250 g
Nylon 6 with 30% glass-fiber, V0 self-extinguished class
Yes
Removable terminal block, max wire size
2,5 mm2
35 mm DIN rail guide
10..40 Vdc
19..28 Vac / 50-60 Hz
3.5 W
1.500 Vac
Ethernet Connection
Power Supply
PLC On
Ethernet link
II
2
IP20
0..+55 °C
-20..+70 °C
30..90% a +40 °C (non condensing)
17.5 x 100 x 112 mm
250 g
Nylon 6 with 30% glass-fiber, V0 self-extinguished class
Yes
Removable terminal block, max wire size
2,5 mm2
35 mm DIN rail guide
10..40 Vdc
19..28 Vac / 50-60 Hz
3.5 W
1.500 Vac
Ethernet Connection
Power Supply
PLC On
Ethernet link
II
2
IP20
0..+55 °C
-20..+70 °C
30..90% a +40 °C (non condensing)
35 x 100 x 112 mm
250 g
Nylon 6 with 30% glass-fiber, V0 self-extinguished class
Yes
Removable terminal block, max wire size
2,5 mm2
35 mm DIN rail guide
10..40 Vdc
19..28 Vac / 50-60 Hz
3.5 W
1.500 Vac
Ethernet Connection
Power Supply
PLC On
Ethernet link
II
2
IP20
0..+55 °C
-20..+70 °C
30..90% a +40 °C (non condensing)
17.5 x 100 x 112 mm
250 g
Nylon 6 with 30% glass-fiber, V0 self-extinguished class
Yes
Removable terminal block, max wire size
2,5 mm2
35 mm DIN rail guide
1
1
1
1
1
1
1
1
1
1
1
1
1
1 (Ethernet 10/100BaseT)
1
1
1
1
1
1
1
1
1
1
Yes (10 Mbps)
Yes (10 Mbps)
Yes (10/100 Mbps)
Yes (10 Mbps)
4
3
4
3
4
3
4
3
Master / Slave
1.200 ..115.000 bps
None, even, odd
1200 m
PPP, http, FTP, SMTP
Master / Slave
1.200 ..115.000 bps
None, even, odd
1200 m
PPP, http, FTP, SMTP
Master / Slave
1.200 ..115.000 bps
None, even, odd
1200 m
PPP, http, FTP, SMTP
Master / Slave
1.200 ..115.000 bps
None, even, odd
1200 m
http, FTP
2.5 ms/K instruction
CPU μP RISC 32 bit – 20 MIPS
16 MB (of which 14 for datalogging)
8 MB
2046 bytes
Yes
32.000
16.000
16.000
n.d.
CPU μP MISC 64 bit – 70 MIPS
128 MB (of which 120 for datalogging)
64 MB
2046 bytes
Yes
32.000
16.000
16.000
2.5 ms/K instruction
CPU μP RISC 32 bit – 20 MIPS
256 KB
236 bytes
Yes
32.000
16.000
16.000
Yes
Yes
Yes
Yes
Yes
Yes
EN50081-2; EN 55011; EN 50082-2; EN
61000-2-2/4, EN 50140/141; EN 61010-1;
EN 60742
Yes
Yes
Yes
Yes
Yes
Yes
EN50081-2; EN 55011; EN 50082-2; EN
61000-2-2/4, EN 50140/141; EN 61010-1;
EN 60742
Yes
Yes (limited functions)
EN50081-2; EN 55011; EN 50082-2; EN
61000-2-2/4, EN 50140/141 ; EN 61010-1;
EN 60742
GENERAL FEATURES
DC Power supply
AC Power supply
Max power consumption
Isolation
Status Indicators
Installation Category
Pollution Degree
Protection Degree
Operating Temperature
Storage Temperature
Humidity
Dimension (W x H x D)
Weight
Enclosure
Hot Swapping
Connection
Mounting
COMMUNICATION PORTS
Ethernet 10BaseT (RJ45)
Serial 0 (RS232 via RJ10-4/4)
Serial 1 (RS485 – ModBUS / CAN)
Serial 2 (RS232/RS485 via RJ10-4/4)
Seriale 3 RS485
CAN-BUS 2.0
Tp-Wire
CONVERTERS
AND INTERFACES
Z-TWS-2
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-PC LINE • CONTROL UNITS
PANEL
MOUNTING UNITS
ETHERNET/REMOTE COMMUNICATION
Ethernet TCP/IP – ModBUS TCP/IP
(Client /Server))
Max task ModBUS Master
Max task ModBUS slave RTU or
TCP
ModBUS RTU on RS232/RS485
Serial Speed
Parity
Max Connection Distance
System Protocols
2.5 ms/K instruction
CPU μP RISC 32 bit – 20 MIPS
16 MB
8 MB
236 bytes
Yes
32.000
16.000
16.000
CONFIGURATION, SOFTWARE, NORMS
Z-NET3 (free configuration software)
OPC SERVER
Web Server
Datalogger
RTU/Z-NET RTU (remote control appl.)
PLC/ISAGRAF
Norms and Approvals
ORDER CODES
Code
Z-TWS3
Z-TWS3-C
Z-TWS2
Z-TWS-64
Yes
Yes
Yes
Yes
Yes
Yes
EN50081-2; EN 55011; EN 50082-2; EN
61000-2-2/4, EN 50140/141; EN 61010-1;
EN 60742
Description
Multifunction Control Unit – Standard Isagraf
Multifunction Control Unit – Standard CoDeSys
Multifunction Control Unit – Standard Isagraf
Multifunction Control Unit – 64 bit Standard Isagraf
Code
Z-TWS-64-C
Z-LWS
Software
Accessories
Description
Multifunction Control Unit – 64 bit Standard CoDeSys
Micro PLC
pag.25
pag.26
MEASUREMENT
INSTRUMENTATION
PROCESSING & MEMORIES
Cycle Time
Data Processing
Flash Memory (Data)
RAM Memory
Retentative Variables
Backup Memory
Max Analog Variables
Max Timers
Max Counters
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
16
Z-PC-LINE • DIGITAL I/O MODULES WITH MODBUS COMMUNICATION
Z-D-IN
Z-D-OUT
Z-10-D-IN
Z-10-D-OUT
Z-D-IO
5-CH Digital Input
module // RS485
5-CH Digital Output
module // RS485
10-CH Digital Input
module // RS485
10-CH Digital Output
module // RS485
8-CH 6 Digital Input / 2 Digital
Output control module
ORDER CODES
Model
Software
Accessories
Z-D-IN
Page 25
Page 26
Z-D-OUT
Page 25
Page 26
Z-10-D-IN
Page 25
Page 26
Z-10-D-OUT
Page 25
Page 26
Z-D-IO
Page 25
Page 26
ELECTRIC FEATURES
Power supply
Max consumption
Galvanic isolation
Transducer power supply
Status Indicators
Protection Degree
19..40 Vdc / 19..28 Vac / 50-60 Hz 10..40 Vdc / 19..28 Vac / 50-60 Hz 10..40 Vdc, 19..28 Vac 50..60Hz
(9..28 Vdc on demand)
3,5 W
2,5 W
2W
1.500 Vac (3 way)
1.500 Vac (3 way)
1.500 Vac vs (input)
3.750 Vac (output)
Max 20 mA
Power supply, error, data transmis- Power supply, error, data transmis- Power supply, error, data transmis- Power supply, error, data transmis- Power supply, error, data transmission, data reception, input
sion, data reception, output
sion, data reception, input
sion, data reception, output , dia- sion, date reception, input and outgnostic
put
IP20
IP20
IP20
IP20
IP20
19..40 Vdc / 19..28 Vac / 50-60 Hz
(9..28 Vdc on demand)
2,5 W
1.500 Vac (3 way)
19..40 Vdc / 19..28 Vac / 50-60 Hz
(9..28 Vdc on demand)
2,5 W
1.500 Vac (3 way)
THERMOMECHANIC FEATURES
Operating Temperature
Dimension
Weight
Enclosure
Connections
Mounting
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Screw terminals, plug in
connectors, 2.5 mm2
35 mm symmetrical DIN rail 46277
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Screw terminals, plug in
connectors, 2.5 mm2
35 mm symmetrical DIN rail 46277
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Screw terminals, plug in
connectors, 2.5 mm2
35 mm symmetrical DIN rail 46277
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Screw terminals, plug in
connectors, 2.5 mm2
35 mm symmetrical DIN rail 46277
0..+55 °C
17.5 x 100 x 112 mm
About 150 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Screw terminals, plug in
connectors, 2.5 mm2
35 mm symmetrical DIN rail 46277
RS485 2 wires
Up to 57.600 bps
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
Max 32 nodes
EEPROM for the configuration
parameters, retention time 10
years
RS485 2 wires
Up to 57.600 bps
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
Max 32 nodes
EEPROM for the configuration
parameters, retention time 10
years
RS485 2 wires
Up to 57.600 bps
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
Max 32 nodes
EEPROM for the configuration
parametres, retention time 10
years
RS485 2 wires
Up to 115.200 bps
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
Max 32 nodes
10
Input protection by 600W/ms TVS
transient current suppressers
8 inputs with 16 bit contactor with
100 Hz max. frequency.
2 inputs with 32 bit contactor with
10 kHz max. frequency.
10
MOSFET outputs protected
against short circuit with shared
negative pole
6 - 40 Vdc power supply, current
carrying capacity 0.5A, resistive
load 0.5A inductive load
Safety time: from 10 ms to 2000 s.
Measurement of the load supply
voltage
6 input, 2 output
Nr 6 opto-isolated digital inputs:
REED, proximity, PNP, NPN, contact, etc.
Internal / external input power
supply, min pulse width 20 ms
Nr 2 SPST relay output with common contact, capacity 5A 250Vac,
contact NA / NC
Frequency measurement for 10
kHz inputs
Period, frequency and Ton, Toff
measurement for 100 Hz inputs
Forward or backward counting
Overflow indication for each total
counter
Diagnostics on/off, overload, shortcircuit
Fail-safe programmable functions
COMMUNICATION, MEMORY PROCESS
Interface
Speed
Protocol
Communication Time
Distance
Connectivity
Data Memory
RS485 2 wires
Up to 57.600 bps
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
Max 32 nodes
EEPROM for the configuration
parameters, retention time 10
years, N° 5 registers 16 bit, N° 5
bit overflow
SIGNALS, MEASUREMENT, CONFIGURATIONS, NORMS
Channel Numbers
Type
5
Opto-isolated for REED, PROXIMITY, PNP, NPN, contact, etc.
Nr 4 input with countering function
16 bit, max frequency 100 Hz
Nr 1 input with countering function
16 bit, max frequency 10 kHz
Bounce Filter 5..250 ms
5
SPST N/O relay output module, 5
A @ 250 Vac with resistive load, 2
A @ 250 Vac with inductive load
Max total current on terminal: 12 A
Measure & Diagnostic
Programming
• Z-NET3 (free software)
• DIP switches
• Z-NET3 (free software)
• DIP switches
• Z-NET3 (free software)
• DIP switches
• Z-NET3 (free software)
• DIP switches
•Z-NET3 (free software)
•DIP switches
•Local/Remote Functioning Mode
•Internal Logic IEC1131.2 type 1
for motor, valves and alarms
command
Norms & Approvals
RINA, CE, EN 50081-2; EN
55011; EN 50082-2; EN 61000-22/4; EN 50140/141; EN 61010-1
RINA, CE, EN 50081-2; EN
55011; EN 50082-2; EN 61000-22/4; EN 50140/141; EN 61010-1
UL-UR, RINA, CE, EN 50081-2;
EN 55011; EN 50082-2; EN
61000-2-2/4; EN 50140/141; EN
61010-1
UL-UR, RINA, CE, EN 50081-2;
EN 55011; EN 50082-2; EN
61000-2-2/4; EN 50140/141; EN
61010-1
RINA, CE, EN61000-6-4/2002;
EN61000-6-2/2002; EN61010-1
17
Z-PID
Z-4AI
Z-8AI
Z-3AO
1-CH Universal Input
module // RS485
2-CH Analog I/O module +
PID control // RS485
4-CH Analog Input
module // RS485
8-CH Analog Input
module // RS485
3-CH Analog Output
module // RS485
ORDER CODES
Model
Software
Accessories
Z-DAQ
Pag. 25
Pag. 26
Z-PID
Pag. 25
Pag. 26
Z-4AI
Pag. 25
Pag. 26
Z-8AI
Pag. 25
Pag. 26
Z-3AO
Pag. 25
Pag. 26
19..40 Vdc / 19..28 Vac / 50-60 Hz
(9..28 Vdc on request)
2,5 W
1.500 Vac (3 way)
Min 18 Vdc, 20 mA
Power supply, error, data transmission, data reception
IP20
19..40 Vdc / 19..28 Vac / 50-60 Hz
(9..28 Vdc on request)
2,5 W
1.500 Vac (3 way)
Min 18 Vdc, 20 mA
Power supply, error, data transmission, data reception
IP20
19..40 Vdc / 19..28 Vac / 50-60 Hz
(9..28 Vdc on request)
2,5 W
1.500 Vac (3 way)
20 Vdc, 40 mA (up to 2 sensors)
Power supply, error, data transmission, data reception
IP20
19..40 Vdc / 19..28 Vac / 50-60 Hz 19..40 Vdc / 19..28 Vac / 50-60 Hz
2,5 W
1.500 Vac (3 way)
Power supply, error, data transmission, data reception
IP20
2,5 W
1.500 Vac (3 way)
Power supply, error, data transmission, data reception
IP20
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Removable terminal block, max
wire size 2,5 mm2
Rear IDC10 connector for Z-PC
backplane
35 mm DIN rail guide
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Removable terminal block, max
wire size 2,5 mm2
Rear IDC10 connector for Z-PC
backplane
35 mm DIN rail guide
0..+60 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Removable terminal block, max
wire size 2,5 mm2
Rear IDC10 connector for Z-PC
backplane
35 mm DIN rail guide
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Removable terminal block, max
wire size 2,5 mm2
Rear IDC10 connector for Z-PC
backplane
35 mm DIN rail guide
2 wire RS485
RS232 (DB9 Jack stereo 3.5 mm)
Up to 57.600 bps (RS485)
2.400 bps (RS232)
ModBUS RTU slave
< 20 ms (@ 38400 baud)
Up to 1.200 m
ELECTRIC FEATURES
Power supply
Power Consumption
Isolation
Transducer Power Supply
Status Indicator
Protection Degree
THERMOMECANIC FEATURES
Operating Temperature
Dimension (w x h x d)
Weight
Enclosure
Connections
Mounting
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Removable terminal block, max
wire size 2,5 mm2 Rear IDC10
connector for Z-PC backplane
35 mm DIN rail guide
CONVERTERS
AND INTERFACES
Z-DAQ
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-PC-LINE • ANALOG I/O MODULES WITH MODBUS COMMUNICATION
2 wire RS485
2 wire RS485
Speed
Up to 57.600 bps
Up to 57.600 bps
Up to 57.600 bps
Protocol
Communication Time
Distance
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
2 wire RS485
RS232 (DB9 Jack stereo 3.5 mm)
Up to 57.600 bps (RS485)
2.400 bps (RS232)
ModBUS RTU slave
< 10 ms (@ 38400 baud)
Up to 1.200 m
Connectivity
Data Memory
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
4 (2 with power transducers)
Voltage(bipolar): ±2, ±10 Vdc,
impedance 100 Ω
Current: (bipolar): ± 20 mA, impedance 100 Ω
Up to 8
Nr 4 differential mode input, max
input voltage 20 Vdc, impedance
200 KΩ
Nr 8 'single-ended' mode input,
impedance 100 KΩ
Range: ± 2.5 Vdc, ± 5 Vdc, ± 10
Vdc
3
Nr 3 output in current 0..20 / 4..20
mA (driven impedance < 500 Ω),
1 output convertible in voltage:
0..10 / 2..10 Vdc (driven impedance > 500 Ω)
Selectable from 11 to 15 bit + sign
0,1% (voltage)
0,2% (current)
0,02%/°C
Z-NET3 (free software)
DIP switches
RINA, CE, EN 50081-2; EN
55011; EN 50082-2; EN 61000-22/4; EN 50140/141; EN 61010-1
Selectable from 11 to 15 bit + sign 12 bit
0.1% full scale
<0.2% (current)
<0.3% (voltage)
0,01%/°C
Z-NET3 (free software),
Z-NET3 (free software)
DIP switches
DIP switches
UL-UR, RINA, CE, EN 50081-2;
UL-UR, RINA, CE, EN 50081-2;
EN 55011; EN 50082-2; EN
EN 55011; EN 50082-2; EN
61000-2-2/4; EN 50140/141; EN 61000-2-2/4; EN 50140/141; EN
61010-1
61010-1
SIGNALS, MEASUREMENT, CONFIGURATIONS, NORMS
Channel Numbers
Type
1 (programmable)
Thermocouple: J (-200..+1000 °C),
K (-200..+1300 °C), R (-50..+1750
°C), S (-50..+1750 °C), T (-200..+
400 °C), E (-150..+800 °C), B
(0..+1800 °C), N (-200..+1300 °C)
Thermoresistance: Pt100: 200..+600 °C; Ni100: -60..+180 °C
Potentiometer:
0..3.5 kΩ; 0..8.7 kΩ; 0..15 kΩ
Voltage (bipolar): 0..50 mV; 0..200
mV; 0..2 V; 0..5 V; 0..10 V
Current (bipolar): 0..20 mA
Resolution
Accuracy
13 bit + sign
< 0,2% o.r.
1 input, 1 output
Input:
Thermocouple: J (-200..+1000 °C),
K (-200..+1300 °C), R (-50..+1750
°C), S (-50..+1750 °C), T (-200..+
400 °C), E (-150..+800 °C), B
(0..+1800 °C), N (-200..+1300 °C)
Thermoresistance: Pt100: 200..+600 °C; Ni100: -60..+180 °C
Potentiometer:
0..3.5 kΩ; 0..8.7 kΩ; 0..15 kΩ
Voltage (bipolar): 0..50 mV; 0..200
mV; 0..2 V; 0..5 V; 0..10 V
Current (bipolar): 0..20 mA
Output
Current 0/4..20 mA
13 bit + sign
< 0,2% o.r.
Thermal drift
Programming
< 0,02%/°C
Z-NET3 (free software)
DIP switches
RINA, CE, EN 50081-2; EN
55011; EN 50082-2; EN 61000-22/4; EN 50140/141; EN 61010-1
< 0,02%/°C
Z-NET3 (free software)
DIP switches
RINA, CE, EN 50081-2; EN
55011; EN 50082-2; EN 61000-22/4; EN 50140/141; EN 61010-1
Norms & Approvals
MEASUREMENT
INSTRUMENTATION
2 wire RS485
PANEL
MOUNTING UNITS
COMMUNICATION, MEMORY PROCESS
Interface
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
18
Z-PC LINE – TEMPERATURE CONTROL MODULES WITH MODBUS COMMUNICATION
Z-4RTD-2
Z-4TC
4-CH RTD Input module // RS485
4-CH Thermocouple input
module // RS485
Z-8TC
8-CH Thermocouple Input
module // RS485
ORDER CODES
Model
Software
Accessories
Z-4RTD-2
Pag. 25
Pag. 26
Z-4TC
Pag. 25
Pag. 26
Z-8TC
Pag. 25
Pag. 26
19..40 Vdc / 19..28 Vac / 50-60 Hz
0,7 W
1.500 Vac (3 way)
Power supply, Error, Data transmission, Data receiving
IP20
19..40 Vdc / 19..28 Vac / 50-60 Hz
Max 2.5 W; 1.6 W @ 24 Vdc
1.500 Vac (3 way)
Power supply, Error, Data transmission, Data Receiving
IP20
19..40 Vdc / 19..28 Vac / 50-60 Hz
0,6 W
1.500 Vac (6 way)
Power supply, Error, RS485 communication
IP20
0..+55 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fibre, V0 self-extinguished class
Screw clamp, plug in connectors, max wire size 2,5 mm2
Rear IDC10 connector for Z-PC backplane
-10..+65 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fibre, V0 self-extinguished class
Screw clamp, plug in connectors, max wire size 2,5 mm2
Rear IDC10 connector for Z-PC backplane stereophonic
front jack for RS232 (COM) connection
35 mm DIN rail guide
ELECTRIC FEATURES
Power supply
Power Consumption
Isolation
Status Indicator
Protection Degree
THERMOMECHANIC FEATURES
Operating Temperature
Dimension (w x h x d)
Weight
Enclosure
Connections
Mounting
-10..+65 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fibre, V0 self-extinguished class
Screw clamp, plug in connectors, max wire size 2,5 mm2
Rear IDC10 connector for Z-PC backplane stereophonic
front jack for RS232 (COM) connection
35 mm DIN rail guide
35 mm DIN rail guide
COMMUNICATION, MEMORY, PROCESS
Interface
Speed
Protocol
Communication Time
Distance
Connectivity
Data storage
2 wire RS485
RS232, front jack, speed 2400 Baud, data bits 8, Parity:
NO, Stop bits:1
Up to 115 kbps
ModBUS RTU slave
Up to 1.200 m
Max 32 nodes
EEPROM configuration parameters, retention time 40
years
2 wire RS485
Up to 57.600 bps
ModBUS RTU slave
< 20 ms (38400 baud)
Up to 1.200 m
Max 32 nodes
EEPROM configuration parameters, retention time 10
years
2 wire RS485
RS232, front jack, speed 2400 Baud, data bits 8, Parity:
NO, Stop bits:1
Reading every 25 ms
ModBUS RTU slave
Up to 1.200 m
Max 32 nodes
EEPROM configuration parameters, retention time 10
years
SIGNALS, MEASUREMENT, CONFIGURATIONS, NORMS
Channel Numbers
Type
Resolution
Accuracy
Thermal drift
Programming
Norms & Approvals
4
4 clamps (ohmmeter 2,3,4 wire)
Pt100: -200..+650°C (f.s. 330 Ω)
Pt500: -200..+750°C (f.s 1.800 Ω )
Pt1000: -200..+210°C (f.s. 1.800 Ω)
Ni100: -60..+250°C (f.s. 330 Ω)
16 bit
0,05%
25 ppm/K
Z-NET3 (free software): online settings parameters via
serial (RS485-bus and/or RS 232-jack) or Ethernet
DIP switches
UL-UR, RINA, CE, EN 61000-6-4/2002, EN 61000-62/2002, EN 61010, EN 60742
4
Bipolar Voltage ± 80 mVdc, impedance 10 MΩ
Thermocouple J, K, R, S, T. B, E, N
8
Thermocouple J, K, R, S, T. B, E, N (EN 60584-1, ITS-90)
Range: -210..1820 °C
Span mV: -10,1..81,4 mV
Shunt up to 70 mW
13 bit + sign
0,1%
0,01%/°C
Z-NET3 (free software): online settings parameters via
serial (RS485-bus and/or RS 232-jack) or Ethernet
DIP switches
RINA, CE, EN50081-2, EN 55011, EN 50082-2,
EN 61000-2-2/4, EN 50140/141, EN 61010-1, EN 60742
16 bit
0,05%
< 100 ppm/K
Z-NET3 (free software): online settings parameters via
serial (RS485-bus and/or RS 232-jack) or Ethernet
DIP switches
CE, EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010,
EN 60742
19
Z203
S203T
S203TA
Strain gauge input
module // RS485
Single phase network
analyzer // RS485
Advanced 3-phase network analyzer // RS485 (input from special CT)
Advanced 3-phase network analyzer // RS485 (input up to 5 Arms)
ORDER CODES
Z-SG
Page 25
Page 26
Z203
Page 25
Page 26
S203T (ingressi fino a 100 mA)
Page 25
Page 26
TA15 (per S203T f.s. 15 A, prec. 0,1%)
TA25 (per S203T f.s. 25 A, prec. 0,1%)
TA100 (per S203T f.s. 100 A, prec. 0,1%)
S203TA
Page 25
Page 26
Power supply
Power Consumption
Isolation
10..40 Vdc, 19..28 Vac 50..60 Hz
2,5 W
1.500 Vac (3 way)
Status Indicator
Power supply
Error
Data transmission
Data reception
IP20
10..40 Vdc, 19..28 Vac 50..60 Hz
2W
3.750 Vac (from/to power)
1500 Vac (other circuits)
Power supply
Error
Data transmission
Data reception
IP20
10..40 Vdc; 19..28 Vac (50-60 Hz)
2,5 W
3.750 Vac (from/to power)
1500 Vac (other circuits)
Power supply
Error
RS485 communication
10..40 Vdc; 19..28 Vac (50-60 Hz)
2,5 W
3.750 Vac (from/to power)
1500 Vac (other circuits)
Power supply
Error
RS485 communication
IP20
IP20
-10..+65 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Removable terminal block, max wire size
2,5 mm2 Rear IDC10 connector for Z-PC
backplane
35 mm DIN rail guide
-10..+65 °C
105 x 89 x 60 mm
About 160 g
Plastic Material UL V0
-10..+65 °C
105 x 89 x 60 mm
About 160 g
Plastic Material UL V0
35 mm DIN rail guide
35 mm DIN rail guide
2 wire RS485
RS232, front jack, speed 2400 Baud, data
bits 8, Parity: NO, Stop bits:1
Up to 115 kbps
ModBUS RTU slave
< 10 ms (38400 baud)
Up to 1.200 m
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
2 wire RS485
RS232, front jack, speed 2400 Baud, data
bits 8, Parity: NO, Stop bits:1
Reading every 25 ms
ModBUS RTU slave
2 wire RS485
RS232, front jack, speed 2400 Baud, data
bits 8, Parity: NO, Stop bits:1
Reading every 25 ms
ModBUS RTU slave
Up to 1.200 m
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
Up to 1.200 m
Max 32 nodes
EEPROM configuration parameters, retention time 10 years
1 input, 1 output
Voltage: up to 500 Vac (50 or 60 Hz)
Current: 5 Arms, Max peak factor: 3,
Max Current 15A, ( 50 or 60 Hz)
Analog retransmission: Vrms, Irms, P, Q,
cosФ
1 input, 1 output
Voltage input: Max=600 Vac, frequency 50
or 60Hz
Current Input: up to 100 mA (from CT)
Measures values (single phase or three
phases): Vrms, Irms, Watt (bidirectional),
Var, VA, Frequency, Cosϕ, Energy
(bidirectional)
Analog retransmission: voltage / current
1 input, 1 output
Voltage input: Max=600 Vac, frequency 50
or 60Hz
Current Input: up to 5 Aac
Measures values (single phase or three
phases): Vrms, Irms, Watt (bidirectional),
Var, VA, Frequency, Cosϕ, Energy
(bidirectional)
Output retransmission: voltage / current
0,5%
Z-NET3 (free software): online parameters
settings via serial or Ethernet
DIP switches
0,2%
Z-NET3 (free software): online parameters
settings via serial or Ethernet
DIP switches
0,2%
Z-NET3 (free software): online parameters
settings via serial or Ethernet
DIP switches
UL-UR, CE, EN50081-2, EN 55011, EN
50082-2, EN 61000-2-2/4, EN 50140/141,
EN 61010-1, EN 60742
CE, EN 61000-6-4/2002, EN 61000-62/2002, EN 61010, EN 60742
CE, EN 61000-6-4, EN 61000-6-2, EN
61010-1, EN 60742
Model
Software
Accessories
ELECTRIC FEATURES
Protection Degree
THERMOMECANIC FEATURES
Operating Temperature
Dimension (W x H x D)
Weight
Enclosure
Connections
Mounting
-10..+65 °C
17.5 x 100 x 112 mm
About 140 g
Nylon 6 with 30% glass-fiber, V0
self-extinguished class
Removable terminal block, max wire size
2,5 mm2 Rear IDC10 connector for Z-PC
backplane
35 mm DIN rail guide
CONVERTERS
AND INTERFACES
Z-SG
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-PC LINE • MODULES FOR PROCESS AND ELECTRIC MEASUREMENT
Speed
Protocol
Communication Time
Distance
Connectivity
Data Memory
2 wires RS485
RS232, front jack, speed 2400 Baud, data
bits 8, Parity: NO, Stop bits:1
Up to 115 kbps
ModBUS RTU slave
< 10 ms (38400 baud)
Up to 1.200 m
Max 32 nodes
EEPROM configuration parameters, retention time 40 years
PANEL
MOUNTING UNITS
COMMUNICATION, MEMORY PROCESS
Interface
A/D Resolution
Accuracy
Stability
Programming
Norms & Approvals
2 input, 2 output
Input: 1 analog channel for load cell (and
Power supply) up to 4 (350 Ω) or 8 (1.000 Ω)
6-wires or 4-wires differential measurement
input, impedance equal to 87 Ω
Output: 1 analog retransmission channel of
the net weight in current (0..20, 4..20 mA)
Or in voltage (0..5, 0..10 V)
Digital Input or Output: 1 contact for
calibration tare or weight limit
Sensibility: from 1 to 64 mV/V
Up to 24 bit
0,01%
25 ppm/K
Z-NET3 (free software): online parameters
settings via serial (RS485-bus and/or RS
232-jack) or Ethernet
DIP switches
CE, EN 61000-6-4/2002, EN 61000-62/2002, EN 61010, EN 60742, IEC 61131
MEASUREMENT
INSTRUMENTATION
SIGNALS, MEASUREMENT, CONFIGURATIONS, NORMS
Channel Numbers
Type
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
20
Z-PC LINE – COMMUNICATION MODULES
S117P
S107USB
K107USB
USBRS232 and USBTTL USBRS485 serial conver- USBRS485 serial converserial converter / isolator ter / isolator (desk version) ter / isolator (din version)
K107A
K107B
RS485RS485 serial
repeater / isolator
RS232RS485 serial
converter / isolator
ORDER CODES
Model
Software and Accessories
S117P
Free Driver in CD
S107USB
Free Driver in CD
K107USB
K-BUS (pag. 35)
K-SUPPLY (pag 35)
K107A
K-BUS (pag. 35)
K-SUPPLY (pag 35)
K107B
K-BUS (pag. 35)
K-SUPPLY (pag 35)
Via USB port
50 mA
1.500 Vac
Power supply, data transmission,
data reception
IP20
Via USB port
60 mA
1.500 Vac
Power supply, data transmission,
data reception
IP20
Via USB port
60 mA
1.500 Vac
Power supply, data transmission,
data reception
IP20
19,2..30Vdc
22 mA (24 Vdc)
1.500 Vac
Data, inverted connection, Power
Supply
IP20
19,2..30Vdc
22 mA (24 Vdc)
1.500 Vac
Data, inverted connection, Power
Supply
IP20
0..+55 °C
40 x 48 x 20,17 mm
24 g
ABS
5 poles connector
-20..+65°C
6,2 x 93,1 x 102,5 mm
45 g
PBT, black
Spring clamp
-20..+65°C
6,2 x 93,1 x 102,5 mm
45 g
PBT, black
Spring clamp
20..+65°C
6,2 x 93,1 x 102,5 mm
45 g
PBT, black
Spring clamp
35 mm DIN rail 46277 guide
35 mm DIN rail 46277 guide
35 mm DIN rail guide
RS485, line termination and speed
(from 1.200
bps a 250 kbps) settable
USB 1.0 e 2.0, connectors
USB A e MINI USB B, multiple
connection on the same PC
Automatic timing
1200...115200 bps
ModBUS RTU slave
Up to 1.200 m
RS485, line termination and speed
(from 1.200
bps a 250 kbps) settable
USB 1.0 e 2.0, connectors
USB A e MINI USB B, multiple
connection on the same PC
Automatic timing
1200...115200 bps
ModBUS RTU slave
Up to 1.200 m
RS485 half duplex, 31 nodes, line
termiantion, protection up to 30
Vdc
RS485 half duplex, 31 nodes, line
termination, protection up to 30
Vdc
Automatic timing
1200...115200 bps
ModBUS RTU slave
Up to 1.200 m
RS232, protection up to 30 Vdc
RS485 half duplex, 31 nodes, line
termination, protection up to 30
Vdc
Automatic timing
1200...115200 bps
ModBUS RTU slave
Up to 1.200 m
CD driver for Windows (XP, Vista,
XP Embedded, CE .net 4.2 e 5.0);
Mac OS 8, 9, OS-X; Linux (2.4.20
and next)
CE, EN 50081-2, EN 55011, EN
50082-2, EN 61000-2-2/4, EN
50140/141, EN 61010-1, EN 60742
CD driver for Windows (XP, Vista,
XP Embedded, CE .net 4.2 e 5.0);
Mac OS 8, 9, OS-X; Linux (2.4.20
and next)
UL-UR, CE, EN 61010-1, EN
60742, EN 61000-6-2, EN 610006-4
DIP switches
DIP switches
UL-UR, CE, EN 61010-1, EN
60742, EN
61000-6-2, EN 61000-6-4
UL-UR, CE, EN 61010-1, EN
60742, EN
61000-6-2, EN 61000-6-4
ELECTRIC FEATURES
Power supply
Power Consumption
Isolation
Status Indicator
Protection Degree
THERMOMECANIC FEATURES
Operating Temperature
Dimension (w x h x d)
Weight
Enclosure
Connections
-20..+65°C
90 x 50 x 25 mm
50 g
ABS
DB9 (RS232)
RJ10 (TTL)
Mounting
COMMUNICATION, MEMORY PROCESS
Interface
RS232
USB 1.0, 1.1 and 2.0
Direction change
Speed
Protocol
Distance
300 …250000 Kbps
CONFIGURATIONS, NORMS
Programming
Norms & Approvals
CD driver for Windows (XP, Vista,
XP Embedded, CE .net 4.2 e 5.0);
Mac OS 8, 9, OS-X; Linux (2.4.20
and next)
CE, EN 61000-6-4, EN 61000-6-2,
EN 61010-1
21
Radio transceiver
ModBUS RTU/TCP-IP
module (portable/desk)
Bridge
Z-PROFIBUS
Z-CANBUS
Profibus DP Slave
interface
CAN Master Interface,
isolated repeater
ORDER CODES
Model
Z107 (panel version)
S107P (desk version)
Software and Accessories
Page 25
Page 26
Z-LINK-434MHz (panel version) ZLINK-869MHz (panel version)
S-LINK-434MHz (desk version)
S-LINK-869MHz (desk version)
A-LINK-434 MHz (external antenna)
A-LINK-869MHz (external antenna)
A-DIR-434MHz (directional antenna)
A-DIR-869MHz (directional antenna)
Z-BRIDGE
Z-PROFIBUS
Z-CANBUS
Page 25
Page 26
Page 25
Page 26
Page 25
Page 26
10..40 Vdc / 19..28 Vac
10..40 Vdc, 19..28 Vac 50..60 Hz
(from screw on IDC10 bus )
10..40 Vdc, 19..28 Vac (by clamp
or IDC10 backplane)
3,5 W
4W
4W
1.500 Vac (3 way)
Ethernet transmission
Power Supply
Ethernet connection
IP20
1.500 Vac (per 1 minute 250 Vac)
Power supply, error
1.500 Vac (per 1 minute 250 Vac)
Power supply, error
IP20
IP20
0..+55 °C
Z-LINK: 17,5 x 100 x 112 mm
S-LINK: 25 x 68 x 125 mm
200 g
Z-LINK: PBT
S-LINK: ABS
Z-LINK: Removable terminal
block, max wire size 2,5 mm2
Antenna: SMA standard frontal
connector
S-LINK: Cable 2.5 mm2 / DB9-F
connector, antenna on side
35 mm DIN rail guide
0..+55 °C
17,5 x 100 x 112 mm
0..+55 °C
17.5 x 100 x 112 mm
0..+55 °C
17.5 x 100 x 112 mm
250 g
PBT
140 g
PBT
140 g
PBT
Removable terminal block, max
wire size 2,5 mm2
Profibus DB9-F
TP-Wire
IDC10 Back Connector for backplane
DB9-F
TP-Wire
IDC10 Back Connector for backplane
35 mm DIN rail guide
35 mm DIN rail guide
35 mm DIN rail guide
RS232
RS485
N° 1 RS232 port
N° 2 RS485 port
N° 1 RS232/RS485 port
N°1 Ethernet port (server, 10
Mbps, http, ftp)
Profibus DP-Slave, speed from
9.600 bps to
12.000 kbps
TP-Wire master, daisy chain connection,
line drive max 485
CANbus 2.0
ELECTRIC FEATURES
Power supply
Z107: 19..40 Vdc, 19..28 Vac
50..60 Hz
S107P: 9..12 Vdc (with feeder 220
Vac)
Power Consumption
Z107: 2,5 W
S107P: 1 W
1.500 Vac (3 way)
Power supply, RST signal status,
data transmission, data reception
Z-LINK: 10..18 / 21,5..28 Vdc;
8,5..14 / 17..20
Vac (50-60 Hz)
S-LINK: from network feeder (230
Vac)
Z-LINK: 1,5 W
S-LINK: 2,5 W
1.500 Vac
Power supply, error, data transmission, data reception
IP20
IP20
Isolation
Status Indicator
Protection Degree
THERMOMECCANIC FEATURES
Operating Temperature
Dimension (W x H x D)
0..+55 °C
17.5 x 100 x 112 mm
Weight
Enclosure
200 g
Z107: PBT
S107P: ABS
Z107: Removable terminal block,
max wire size 2,5 mm2
Connections
Mounting
35 mm DIN rail guide
COMMUNICATION, MEMORY PROCESS
Speed
Z107
RS232 on RJ45 frontal connector
RS485/RS422, removable termian
blockwith screw type connection
S107P
RS232, DB9 connector
RS485/RA422, extractable clamps
5 poles
Screw connection
2 wires Half Duplex, point to point,
multidrop
Automatic timing, command from
RTS on RS232 interface
Up to 115 kbps
Frequency
Emitted Power
Protocol
ModBUS RTU slave
Distance
Up to 1.200 m
Interface
Operating ways
Direction change
Half Duplex
Automatic timing
100 Kbps (data interface) / 9.600
bps (radio)
434 (869) MHz
10 mW
ModBUS RTU
Up to 1 Mbps
ModBUS RTU master
ModBUS TCP
Profibus DP Slave
CANbus 2.0
100 m (suggested) up to 1 km (in
open field without obstacles with
directive antenna)
CPU 32 bit, 512 kB flash, 256 kB
RAM, backup battery
Memory
CONFIGURATIONS, NORMS
Programming
Norms & Approvals
CONVERTERS
AND INTERFACES
Z-BRIDGE
PANEL
MOUNTING UNITS
RS232RS485/422 serial
isolator/ converter
Z-LINK / S-LINK
DIP switches (speed, communica- DIP switches (communication
tion,change of direction)
parameters)
Programmable Flash for other protocols
RINA, CE, EN 50081-2, EN
CE; EN50081-2; EN 55011; EN
55011, EN 50082-2, EN 61000-2- 50082-2; EN 61000-2-2/4; EN
2/4, EN 50140/141, EN 61010-1, 50140/141; EN 61010-1; EN
EN 60742
60742; ETSI 300-328
Z-NET3 (free software)
Isagraf block data exchange
EN50081-2; EN 55011; EN 50082- CE, EN 61000-6-4, EN 61000-6-2, CE, EN 61000-6-4, EN 61000-6-2,
2; EN 61000-2-2; EN 50140/141; EN 61010-1, EN 60742
EN 61010-1, EN 60742
EN 61010-1; EN 60742;
MEASUREMENT
INSTRUMENTATION
Z107 / S107P
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-PC LINE • COMMUNICATION MODULES
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
22
Z-PC LINE • COMMUNICATION MODULES
Z-GW-MB
Z107E
Z107FO
ZC-107FO
Gateway ModBUS RTU
Master ModBUS
Server (Slave) TCP
RS232 Serial Converter
Ethernet 10-100 MB
RS232-RS485 optical
fiber repeater
CAN-bus optical fiber
repeater
ORDER CODES
Model
Software and Accessories
Z-GW-MB
Free Configuration software in CD
Z107E
Free Driver in CD
Z107FO
Z-PC-FO (cable in multimodal optical fiber
with connections ST/ST, L=2m)
ZC-107FO
Z-PC-FO (cable in multimodal optical fiber
with connections ST/ST, L=2m)
12,4 Vdc, 12..28 Vac (50..60 Hz)
1,2 W
Serial Communication and optical
fiber status
-30..+60 °C
-30..+85 °C
30..90% non condensing
17,5 x 100 x 112 mm
140 g
PBT, black
35 mm DIN rail guide
DIP-switch (baud rate, parity, serial port, bit
stop, termination)
CE, EN 61000-6-4, EN 64000-6-2, EN
61010-1, EN 60742
12,4 Vdc, 12..28 Vac (50..60 Hz)
1,2 W
Serial Communication and optical
fiber status
-30..+60 °C
-30..+85 °C
30..90% non condensing
17,5 x 100 x 112 mm
140 g
PBT, black
35 mm DIN rail guide
DIP-switch (baud rate, parity, serial port, bit
stop, termination)
CE, EN 61000-6-4, EN 64000-6-2, EN
61010-1, EN 60742
12,4 Vdc, 12..28 Vac (50..60 Hz)
1,2 W
Serial Communication and optical
fiber status
-30..+60 °C
-30..+85 °C
30..90% non condensing
17,5 x 100 x 112 mm
140 g
PBT, black
35 mm DIN rail guide
DIP-switch (baud rate, parity, serial port, bit
stop, termination)
CE, EN 61000-6-4, EN 64000-6-2, EN
61010-1, EN 60742
12,4 Vdc, 12..28 Vac (50..60 Hz)
1,2 W
Serial Communication, Functioning
Yes
DB9F connector (COM)
Removable terminal block
IDC10 back connector for Z-PC DIN backplane
DB9F (COM)
ELECTRIC FEATURES
Power supply
Power Consumption
Status Indicator
Operating Temperature
Storage Temperature
Humidity
Dimension (W x H x D)
Weight
Enclosure
Mounting
Settings
Conformity
-30..+60 °C
-30..+85 °C
30..90% non condensing
17,5 x 100 x 112 mm
140 g
PBT, black
35 mm DIN rail guide
DIP-switch (baud rate, parity, serial port, bit
stop, termination)
CE, EN 61000-6-4, EN 64000-6-2, EN
61010-1, EN 60742
COMMUNICATION PORTS
RS232
RS485 / CAN
Yes, optoisolated
RJ45 connector
Ethernet
Optical Fiber
Removable terminal block
IDC10 back connector for Z-PC DIN backplane
DB9F (COM)
RJ45 connector
Multimodal mode (62,5/125 or 50/125 μm)
Frontal connector ST/ST
Multimodal mode (62,5/125 or 50/125 μm)
Frontal connector ST/ST
Delay in Sending Message 300 μs
Max distance 2 km
PROTOCOLS
Ethernet TCP/IP
ModBUS RTU
ModBUS TCP
CAN
Speed
Delay Time
Yes
Yes
Yes
Yes
(10/100 Mbps)
(10/100 Mbps)
Yes
Z-GW-MB Connection scheme (gateway ModBUS RTU / TCP)
Z107E Connection scheme (RS32/RS485/Ethernet converter)
Z107E
Z-GW-MB
CANBUS 2.0
Up to 1 Mbps
From 1.200 to 115.200 bps
160 – 240 ms (9.600 bps)
145 – 155 ms (115.200 bps)
"#$
% &
Z107FO Connection scheme (optical converter – serial ModBUS)
Z107FO
RS232 / RS485
(ModBUS RTU)
RS232 / RS485
(ModBUS RTU)
ZC-107FO Connection scheme (optical converter - serial CANopen)
MasterCAN
Z107FO
Multimodal optical
fiber (< 2 km),
Connections ST/ST
()
ZC-107FO
ZC-107FO
Multimodal optical
fiber (< 2 km),
ST/ST Connection
Bus line CANopen (1)
12
12
Bus line CANopen (2)
12
12
23
Z-PC-LINE • DIGITAL I/O MODULES WITH CANOPEN COMMUNICATION
24-CH digital output // CANopen
module
ZC-16DI-8DO
24-CH, 16 digital input / 8 digital
output // CANopen module
ORDERS CODES
Model
Software
Accessories
ZC-24-DI
Pg.25
Pg.26
ZC-24-DO
Pg.25
Pg.26
ZC-16DI-8DO
Pg.25
Pg.26
10..40 Vdc; 19..28 Vac
2,5 W
Digital inputs, communication
1,5 kVac (3 way)
~ 1 ms
-10..+65 °C
35 x 100 x 112 mm
PBT, 170 g, black
Removable screw terminals
IDC10 connector for Z-PC-DIN backplane
RS232, front jack, speed 2400 Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CANopen/ModBUS protocol switching
CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
10..40 Vdc; 19..28 Vac
2,5 W
Digital outputs, communication
1,5 kVac (3 way)
~ 1 ms
-10..+65 °C
35 x 100 x 112 mm
PBT, 170 g, black
Removable screw terminals
IDC10 connector for Z-PC-DIN backplane
RS232, front jack, speed 2400 Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CANopen/ModBUS protocol switching
CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
10..40 Vdc; 19..28 Vac
2,5 W
Digital inputs, fault outputs, communication
1,5 kVac (3 way)
~ 1 ms
-10..+65 °C
35 x 100 x 112 mm
PBT, 170 g, black
Removable screw terminals
IDC10 connector for Z-PC-DIN backplane
RS232, front jack, speed 2400 Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CANopen/ModBUS protocol switching
CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
GENERAL DATA
Power supply
Power consumption
Status indicator
Galvanic isolation
Response time
Operating temperature
Dimensions (w x h x d)
Enclosure, weight, colour
Connections
Protection degree
Configuration
Protocols supported
CANopen max speed
Special functions
Conformity
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
24-CH digital input // CANopen
module
ZC-24-DO
CONVERTERS
AND INTERFACES
ZC-24-DI
16
EN 61131-2 type 2, synq (pnp)
N.8 @ 32 bit, Max freq. 10 KHz
Increment individual configurable, reset, preset
Overflow indication
30 V
250 μs
< 3ms
< 1ms
OUTPUT DATA
Nr channels
Type
Power supply Voltage
Maximum Current
ON/OFF delay
RPDO
24
Mosfet (open source) with shared common
5..30Vdc
0.5 A (connection from terminals)
25 mA (connection from connectors)
< 1ms
< 1,25ms
8
Mosfet (open source) with shared common
5..30Vdc
0.5 A (connection from terminals)
25 mA (connection from connectors)
< 1ms
< 1,25ms
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic), Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic), Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
CANOPEN FEATURES
NMT
Error control
Node ID
Nr PDO
PDO modes
PDO linking
PDO mapping
Nr SDO server
Emergency message
Supported application layer
Supported profile
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic), Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
MEASUREMENT
INSTRUMENTATION
Vmax
Minimun pulse width
ON/OFF delay
TPDO
24
EN 61131-2 type 2, synq (pnp)
N.8 @ 32 bit, Max freq. 10 KHz
Increment individual configurable, reset, preset
Overflow indication
30V
250 μs
< 3ms
< 1ms
PANEL
MOUNTING UNITS
INPUT DATA
Nr channels
Polarity
Counters
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
24
Z-PC-LINE • DIGITAL I/O MODULES WITH CANOPEN COMMUNICATION
ZC-8AI
ZC-3AO
8-CH analog input // 3-CH analog output //
CANopen module
CANopen module
ZC-4RTD
ZC-8TC
ZC-SG
4-CH RTD input //
CANopen module
8-CH thermocouple
input // CANopen
module
Strain gauge
input // CANopen
module
ORDERS CODES
Model
Software
Accessories
ZC-8AI
Pg.25
Pg.26
ZC-3AO
Pg.25
Pg.26
ZC-4RTD
Pg.25
Pg.26
ZC-8TC
Pg.25
Pg.26
ZC-SG
Pg.25
Pg.26
10..40 Vdc; 19..28 Vac
5W
22 mA, 8 sensors
1,5 kVac (6 way)
Against ESD discharge up to 4 KV
Power, communication, fault input
< 28 ms
0,05%
14 or 15 bit
< 100 ppm/°C
17,5 x 100 x 112 mm
PBT, 140 g., black
-10..+65 °C
Removable screw terminals
IDC10 connector for Z-PC-DIN
backplane
RS232, front jack, speed 2400
Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CE, EN 61000-6-4, EN 64000-6-2,
EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
10..40 Vdc; 19..28 Vac
2,5 W
1,5 kVac (5 way)
Against ESD discharge up to 4 KV
Power, communication, fault input
< 7 ms
0,01%
14 bit
< 100 ppm/°C
17,5 x 100 x 112 mm
PBT, 140 g., black
-10..+65 °C
Removable screw terminals
IDC10 connector for Z-PC-DIN
backplane
RS232, front jack, speed 2400
Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CE, EN 61000-6-4, EN 64000-6-2,
EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
10..40 Vdc; 19..28 Vac
1W
1,5 kVac (6 way)
Against ESD discharge up to 4 KV
Power, communication, fault input
< 28 ms
0,05%
13 or 14 bit
< 50 ppm/°C
17,5 x 100 x 112 mm
PBT, 140 g., black
-10..+65 °C
Removable screw terminals
IDC10 connector for Z-PC-DIN
backplane
RS232, front jack, speed 2400
Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CE, EN 61000-6-4, EN 64000-6-2,
EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
10..40 Vdc; 19..28 Vac
1W
1,5 kVac (6 way)
Against ESD discharge up to 4 KV
Power, communication, fault input
< 28 ms
0,1%
15 bit
< 100 ppm/°C
17,5 x 100 x 112 mm
PBT, 140 g., black
-10..+65 °C
Removable screw terminals
IDC10 connector for Z-PC-DIN
backplane
RS232, front jack, speed 2400
Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CE, EN 61000-6-4, EN 64000-6-2,
EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
10..40 Vdc; 19..28 Vac
2W
5 Vdc, up to 4 / 8 load cells
1,5 kVac (3 way)
Against ESD discharge up to 4 KV
Power, communication, fault input
< 7 ms
0,01%
24 bit
< 25 ppm/°C
17,5 x 100 x 112 mm
PBT, 140 g., black
-10..+65 °C
Removable screw terminals
IDC10 connector for Z-PC-DIN
backplane
RS232, front jack, speed 2400
Baud
IP20
Dip Switches (baud rate, Node ID)
EDS file
CAN bus standard (2.0A, 2.0B)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (through RS232)
1 Mbps
CE, EN 61000-6-4, EN 64000-6-2,
EN 61010-1
CAN 2.0A, 2.0B
CiA 401 v.2.01
4, RTD with 2,3,4 wires, fully
isolation
PT100 (EN 60751/A2-ITS90)
Range: -200..+650°C
PT500 (EN 60751/A2-ITS90)
Range: -200..+750°C
PT1000 (EN 60751/A2-ITS90)
Range: -200..+210°C
Ni100 (EN 60751/A2-ITS90)
Range: -60..+250°C
Configurable fault
8 (thermocouples or mV)
2
THERMOCOUPLE
Type: J, K, E, N, S, R, B, T
Tables EN 60584-1 (ITS 90)
Span: -10,1..81,4 mV
Impedance 10 MΩ
Configurable fault
ANALOG
Load cells (strain gauge), Voltage
supply 5 Vdc
Min impedance 87 Ω
4 or 6 –wire bridge connections
Sensitivity from 1 to 64 mV
Full scale: 5..320 mV
DIGITAL
Tare calibration and span (max 30 V)
GENERAL DATA
Power supply
Power Consumption
Power transducers
Galvanic isolation
Input protection
Status indicators
Response time
Accuracy
A/D Resolution
Thermal drift
Dimensions (W x H x D)
Enclosure, weight, colour
Operating temperature
Connections
Protection degree
Configuration
Protocols supported
CANopen max speed
Conformity
INPUT DATA
Nr channels
8 (4 isolation zones)
Type
Voltage range: ±10 V
Current range: 0..20, 4..20 mA
2,3 wires sensor connection
Configurable fault
OUTPUT DATA
3
Voltage range: ±10 V
Current range:
0..20, 4..20 mA
Bipolar output signals
Configurable fault
Nr channels
Type
1
DIGITAL
Nr 1 channel for stable weight or
threshold (max 30 V, 50 mA)
CANOPEN FEATURES
NMT
Error control
Node ID
Nr PDO
PDO modes
PDO linking
PDO mapping
Nr SDO server
Emergency message
Supported application layer
Supported profile
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic),
Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic),
Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic),
Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic),
Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
Slave
Node guarding
Free software, DIP switches
RX 5
Event triggered, Synq (cyclic),
Synq (acyclic)
yes
variable
1
yes
CiA 301 v4.02
CiA 401 v2.01
25
Z-PC LINE • SOFTWARE
Configuration and test: I/O slave modules and A/D
converters (Z-4AI-D, Z-4TC-D)
Communication via PC: Through serial interface
Operating system: Windows 95, 98, ME, 2000, XP,
Vista
Settings: COM Port, baud rate, address, filter, burnout, measurement scale, root extraction etc.
Special Functions: thermocouple calibration, automatic detecting of connected devices, warning
Configuration: Project, CPU, I/O modules, variables, communication network
Automation Functions: Pumps rotation, operating hours meter, counter, flow calculation
Telecontrol Functions: Alarms management / events via SMS, status request via SMS,
SMS commands, log file management via e-mail, log file management via ftp, call on alarm
Additional Tools: Web Editor, Data
CODICI DʼORDINE
Code
Tool
Versions
Z-NET2
Z-NET3
Z-NETIO
Extensions
ORDER CODES
I/O modules software configuration
Web Editor
Z DATA STORE
Development Environment for Hmtl / Java web pages editing
M-RTU communication software manager
• Supported Versions Z-TWS 64, ZTWS-02,
Z-RTU light and full version
• Basic object insertion (text and images)
• SENECA Tools, integrated with I/O modules
• Basic (label, images) and advanced (trend,
plot, led etc.) graph control
• SMS receiving
• Local / remote data download
• Automatic calls management
• Management, creation and files updating
ORDER CODES
Development Environment for Hmtl / Java web pages editing
Z-SMS DATA STORE
Software of data and M-RTU Communication management
Z-NET2 RTU
OPC SERVER
Data manager software for telecontrol systems
Data exchange software client / server
Configurator Module: RTU Connection Parameters
Runtime Module: Periodical Scheduling for the data download and RAS connections management through OPC server activation
Viewer Module: Alarms and trend Visualization e trend through OCX technology
OPC-SERVER-D: OPC Server demo (functioning for 30')
OPC-SERVER: OPC Server Z-TWS. standard version for remote units connections and data download. Data Exchange through web service / cgi
OPC-SERVER I/O: Support for ModBUS RTU slave or ModBUS TCP protocols supported, PC
ModBUS Master, GPRS TIM and WIND connections, versions from 100, 500 and illimited tag
OPC-SERVER MB: ModBUS RTU slave or ModBUS TCP protocols supported, slave instrumentations simulation, GPRS Vodafone connections, versions from 100, 500 and illimited tag
ORDER CODES
ORDER CODES
Code
Tool
Versions
Description
Data management and telecontrol software
Basic Functions
Basic Functions + exportable OCX
Basic Functions + exportable OCX + automatic download up to 5 RTU
Basic Functions + exportable OCX + automatic download from 6 to 10 RTU
Basic Functions + exportable OCX + automatic download more than 10 RTU
OCX Class objects exportable ActiveX for visualizations
Z-NET2-RTU
-0
-1
-2
-3
-4
Option
OCX
Code
Versions
OPC-SERVER-D
OPC-SERVER
OPC-SERVER I/O-1
OPC-SERVER I/O-2
OPC-SERVER I/O-3
OPC-SERVER MB-1
OPC-SERVER MB-2
OPC-SERVER MB-3
DATA RECORDER
Description
OPC Server demo (30’)
OPC Server Z-TWS (standard)
OPC Server I/O 100 tag
OPC Server I/O 500 tag
OPC Server I/O tag illimited
OPC Server ModBUS Slave 100 tag
OPC Server ModBUS Slave 500 tag
OPC Server ModBUS Slave tag illimited
Z-CALCULUS
Data acquisition, visualization and recording software
OPC client-based power consumption software
ORDER CODES
• Detailed Analysis of relevated and calculated data
• Power costs calculation
• Energy management planning
• Industrial consumptions detection and
accounting
Code
Tool
Version
Options
DR
-2
-4
-8
-16
-32
-64
-M
-A
-R
-MC
Description
Data acquisition software integrated in Z-NET3
2 recordable channels (video tracks)
4 recordable channels (video tracks)
8 recordable channels (video tracks)
16 recordable channels (video tracks)
32 recordable channels (video tracks)
64 recordable channels (video tracks)
Math (calculated channels) tool
Alarm (output activation) tool
Report tool
Multi-client tool
ORDER CODES
Z-CALCULUS
OPC client-based power consumption software
PANEL
MOUNTING UNITS
ORDER CODES
WEB EDITOR
MEASUREMENT
INSTRUMENTATION
Z-PROG
Description
Software of Z-PC Systems Configuration for CPU 2005-2006
Software of Z-PC Systems Configuration for CPU producted since 2007
Software of I/O slave modules Configuration,
ModBUS Master S401 project Data Recorder
Z-NET2-RTU Telecontrol tool
OPC
OPC - OPC stand alone
Isagraf
Isagraf – PLC programming toolkit.
Data Recorder Data acquisition tool.
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-NET3
EC 61131 Z-PC system configurator
CONVERTERS
AND INTERFACES
Z-PROG
I/O modules software configuration
DISTRIBUTED I/O MODULES AND REMOTE CONTROL SYSTEMS
26
Z-PC LINE • SOFTWARE AND ACCESSORIES
ISAGRAF
CODESYS
IEC 61131-3 Programming tool
IEC 61131-3 Programming tool
Standard: IEC 61131-3
Programming languages: SFC, FBD,LD,
ST, IL, FC, text
Communication functions: ftp client management, outgoing e-mail , remote connections, incoming and outgoing SMS
Tag licence: 64, 256
• CANopen Master configuration
• Language compliant with IEC 61131-3
standard
• PLC soft with real-time
• Communication Network Configuration
• Data Exchange with CANopen slave
modules
;---------------------------; Electronic Data Sheet Specification for CANopen
;
;
, CiA DSP 306
; Version 1.2
; Date: July 2004
EDS (Electronic Data Sheet)
Configuration Files for CANopen I/O
modules, compliant to CiA DS-301,
free on www.seneca.it.
ORDER CODES
Code
Versions
UNICONTROL01
UNICONTROL02
Descriptions
Toolkit Isagraf, licence 64 tag
Toolkit Isagraf, licence 256 tag
;---------------------------; Application Layer and Communication Profile
; CiA DS 301
; Version 4.01
; Date: 1 June 2000
;---------------------------[FileInfo]
FileName=ZC-16DI8DO_R01.eds
FileVersion=1
FileRevision=1
EDSVersion=4.0
Description=ZC-16DI8DO EDS FILE
CreationTime=10:30AM
CreationDate=14-02-2008
CreatedBy=SENECA s.r.l.
ModificationTime=10:30AM
ModificationDate=14-02-2008
ModifiedBy=SENECA s.r.l.
ACCESSORIES
Z-POWER
S117P
Voltage transformer with output at 19 Vac
(DIN rail mounting)
RS232/TTL/USB serial converter/isolator
• Compliant with Windows (Xp, Vista, Xp Embedded,
CE .Net), Mac OS (8, 9, X), Linux (2.24.0 or next)
• Compliant with USB 1.0, 1.1, 2.0
• Isolation USB / RS232: 1.500 V
• Power Supply: loop powered from PC USB port
• RS232 connection: DB9
• TTL connection: RJ-10
• Dimensions: 90 x 50 x 25 mm
• Accessories: CD with driver
• Primary Voltage 230 (115) Vac ± 10%
• Box in fiberglass self-extinguish (V-0)
• Protection by thermo-fuse
• Dimensions 3 DIN modules(15 VA), 5 DIN
modules (25 VA)
• IP 40
ORDER CODES
Code
Versioni
Z-POWER 230-15VA
Z-POWER 230-25VA
Z-POWER 115-15VA
ORDER CODES
Descriptions
Voltage Transformer 19 Vac, 230-15 VA
Voltage Transformer 19 Vac, 230-25 VA
Voltage Transformer 19 Vac, 115-15 VA
Code
S117P
Descriptions
Asynchronous RS232-TTL/USB serial converter
CONNECTION CABLE
Code
PM001420
PM001430
PM001440
PM001450
PM001460
PM001530
PM001601
PM001810
PM001820
PM001830
PM001840
PM001850
Description
RS232 Serial cable (Z-TWS, Z-RTU, Z107, Z-LINK)
Modem communication cable (Z-TWS)
Modem and HMI communication cable
(ZTWS,Z-RTU)
Right Ethernet cable (Z-TWS – network device)
Crossing Ethernet cable (Z-TWS - PC)
Modem serial cable (Z-TWS, Z-RTU)
Programming serial cable (Z109REG, Z109REG2, Z-4AI-D,
Z-4TC-D, Z3AO, Z8AI, Z-8TC, Z-4RTD2, Z-SG, Z203)
Z-TOP / PC Programming cable
Z-TOP / Z-TWS-02 Communication cable
Z-TOP / Z-RTU Communication cable
Communication cable Z-TOP / RS485
DB15F / DB15M adapter for ZTOP05, ZTOP11
Terminals
RJ10 / DB9F
RJ10 / DB25M
RJ10 / DB25M
Code
Description
PM001970RS232 Serial Cable (K107B) Bolt heads / DB9F Bolt heads / DB9F
PM002240
Z109REG2 Programming cable / Test-3
PM002340
Tp-Wire cable for Z-PROFIBUS
PM002350
RS485 serial cable for Radiomodem
PM002460
RS485 serial cable Tp-wire (Z-TWS)
PM002470
Serial cable (Z-TWS, Z-RTU, Z107)
PM002480
RS485 Serial cable (Z-TWS)
PM002490
RS232 Serial cable – programming
(ZRTU, M-RTU, radiomodem)
PM002500
RS232 modem for firmware updating
(ZRTU, M-RTU, radiomodem)
PM002510
RS485 serial cable for radiomodem
PM002520
RS232 Serial cable
PM002530
RS232 Serial cable
RJ45 / RJ45
RJ45 / RJ45
RJ10 / DB9M
Jack / DB9F
DB15F / DB9F
DB15F / RJ10
DB15F / DB9M
DB15F / Bolt heads
Terminals
Jack / Jack
Tp-wire / Tp-wire
DB9M / Bolt Heads
Tp-wire / Bolt Heads
RJ10 / RJ10
RJ10 / Bolt Heads
DB9M / DB9F
DB9M / DB9F
DB9F / Bolt Heads
DB9M / DB9M
DB9F / DB9F
Z-PC DIN
Power supply and bus connection
for Z-PC system
Mounting: On 35 mm Din rail guide(DIN 46277)
Hot swapping: Yes
Material: Nylon PA6 charged with 30% glass fiber
Mounting: on 35 mm din rail guide
Terminal: Power / data line
CODE
Z-PC-DINAL
Z-PC-DIN2
Z-PC-DIN4
Z-PC-DIN8
Z-PC-DINAL2-17.5
Z-PC-DIN2-17.5
Z-PC-DIN8-17.5
Z-PC-DINAL1-35
Z-PC-DIN1-35
Z-PC-DIN4-35
VERSIONS / OPTIONS
Head
2 slots
4 slots
8 slots
Head + 2 slots 17,5 mm step
2 slots - 17,5 mm step
8 slots - 17,5 mm step
Head + 1 slot - 35 mm step
1 slot - 35 mm step
4 slot - 35 mm step
DESCRIPTION
Backplane for an easy wiring on DIN
guide (old size)
Backplane for an easy wiring on DIN
guide (new single size)
Backplane for an easy wiring on DIN
guide (new double size)
New Z-PC DIN – single size
New Z-PC DIN – double size
(17,5 mm step)
(35 mm step)
Z-PC-DINAL2-17.5
Z-PC-DIN2-17.5
Z-PC-DIN8-17.5
Z-PC-DINAL1-35
Z-PC-DIN1-35
Z-PC-DIN4-35
27
2
CONVERTERS
AND INTERFACES
CONVERTERS AND INTERFACES
28
CONVERTERS AND INTERFACES FOR ANY NEED
Z LINE
K LINE
TEMPERATURE
TRANSMITTERS
T LINE
Compact Isolated
Converters
Modular Isolated
Converters
Loop powered
instrumentation
DIN Converters
Isolators
Overvoltages
Protections
Power
Supply
S LINE
S LINE
S400 LINE
Power supply
Serial
A/D PLC
With Relay
Output
From / to frequecy
Temperature
Electrical
Measurement
10..40 Vdc
12 / 24
Vac/Vdc
115 / 230 Vac
Self / loop
powered
BUS
powered
Power for
transducers
CONVERSION
TYPE
Universal
Analog
DIMENSION
17,5 mm
6,2 mm
POWER
SUPPLY
19,2..30 Vdc
19..40 (9..30)
Vdc
CONNECTIONS
Cage
Clamp
Screw Terminal
INPUT
UNIVERSAL
(mA, A, mV, V,
RTD, TC)
ANALOG
Elettric
mA, A, mV, V,
Ohm
OUTPUT
ANALOG
mA, V
CONTACT
PROGRAMMING
DIP Switch
Software
Test-3
ACCURACY
CLASS
0,01%
0,1%
0,2%
0,25%
0,3%
OPERATING
TEMPERATURE
0..50°C
0..55°C
0..60°C
-10..60°C
-20..65°C
ISOLATION
1,5 kVac
3,75 kVac
4 kVac
4,5 kVac
PULSE
SERIAL
Mechanical contact, reed, npn, pnp, 24 RS232, RS485
Vdc, Namur, photoelectric, hall sensor,
(ModBUS),
variable reluctance
USB
RELAY
PULSE
Serial
SPDT, SPST, static for
Reed relè, npn
RS485,
1, 2, 3, 5 alarm conopen collector
ModBUS
trol
CONTACT
0,5%
RTD SENSOR
RTD (Pt100, Pt500,Pt1000, Ni100, KTY81,
KTY84, NTC), TC (J,K,R,S,T,B,C,E,N),
Load cell
29
SIGNAL CONDITIONING BENEFITS
• TOTAL ISOLATION BETWEEN
SIGNAL AND POWER SUPPLY
CIRCUITS
K-LINE
Z-LINE
• SEPARATION OF SEVERAL
GROUNDS POTENTIAL
• RELIABILITY AND SECURITY
IN DATA TRANSMISSION
• ISOLATION SUPPORTED
TRANSMISSION SECURITY
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
CONTROL UNITS
Flow
Pressure
• ELECTROMAGNETIC IMMUNITY
• PROTECTION AGAINST
HIGH GROUND POTENTIALS
Level
PANEL
MOUNTING UNITS
Voltage
Current
Temperature
CONVERTERS
AND INTERFACES
• WIRING REDUCTION
Speed
Position
TYPICAL APPLICATION AREAS
METAL
INDUSTRY
OIL & GAS
FOOD &
BEVERAGE
PHARMACEUTICAL
SECTOR
BUILDING
CONSTRUCTIONS
HEAT ENGINEERING,
THERMOTECHNICS
NON-METAL
WORKINGS
ENERGY
WATER
INDUSTRY
MEASUREMENT
INSTRUMENTATION
PAPER
INDUSTRY
CONVERTERS AND INTERFACES
30
K-LINE
ACCURACY
CONNECTIONS
RELIABILITY
0,1%
• Spring clamp
• Expandable bus
connector on 35
mm guide (EN
60175)
> 500.000 h
OPERATING
TEMPERATURE
ISOLATION
POWER
CONSUMPTION
DIMENSIONS
APPROVALS
-25..+65°C
1,5 kVac
< 25 mA
6,2 mm
CE, UL
CSA
Z-LINE
POWER
TRANSDUCERS
Min
20 Vdc
ISOLATION
1,5..4 kVac
CONNECTION
SETTINGS
POWER SUPPLY
Removable
terminal
blocks
• DIP-switches
• Software
• Hand-held
device
Vac / Vdc
switching
DIMENSIONS
APPROVALS
17,5 mm
CE, UL
CSA
UNIVERSAL
INPUTS
• Analog (mA, A,
mV, V, Ohm)
• Sensors (TC, RDT,
load cell)
• Pulse / Frequency
31
K107A
K109LV + T201DC
RS485 (Modbus) multiple serial lines connection
with galvanic isolation
Measurement and string current transmission in
photovoltaic system
Photovoltaic String
Parallel
Network
Panel
Photovoltaic String
Z109REG2
Isolated Digital coupler (Namur sensor) – acquisition
system / PLC
Isolation and analog conversion with multiplexing
function on re-transmitted output
Acquisition Modules
for digital input,
ModBUS RTU interface
Z109S
Z102
Isolation and re-transmission of 4..20 mA signal from a 2
wire sensor (powered by Z109S)
Inverters serial control through a potentiometer
4..20 mA
0..1000 Ohm
2 wire technique
power supply
SPEED
INDICATOR
PLC
Sensore
INVERTER
analog
input
0..10 Vdc
Power
Supply
24 Vac/dc
4..20 mA
power supply
24 Vac/dc
INVERTER
4..20 mA
Z110
Z-SG
Signals isolation between transducers and acquisition
channel 1 - 4..20 mA
system
Load cell weight measure and analog re-transmission
as mA/V signal
channel 2 - 4..20 mA
re-transmitted analog signal
PC (programming)
Power
Supply
(24 V)
Power
Supply
(24 V)
RS232
4..20 mA
4..20 mA
PANEL
MOUNTING UNITS
Proximity Sensor
CONVERTERS
AND INTERFACES
K112
strain gauge
load cell
RS485 - ModBUS RTU
MEASUREMENT
INSTRUMENTATION
max 32 nodi, 1200 m
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
APPLICATION EXAMPLES
CONVERTERS AND INTERFACES
32
APPLICATION EXAMPLES
Z201
Z202
Alternate current conversion/isolation into mA/V standard
signal
Alternate voltage conversion/isolation into mA/V standard
signal
0/4..20 mA
0/4..20 mA
TA (es. 100 A / 5A)
Power supply
9..40Vdc / 19..28 Vac
Power supply
9..40Vdc / 19..28 Vac
0..500 Vac
Z203
Z-4AI-D
Single phase network analyzer with output signal
re-transmission
Current PLC inputs with active / passive standards,
Acquisition of analog signals and conversion into digital
signals for PLC
or voltage (0/2..10 Vdc)
≅
$
passive sensor
Power supply 9..40
Vdc / 19..28 Vac
%
+ 0/4..20 mA
Port for DATA Bus / RS485
Modbus Rtu - Slave
Z104
Z111
Flow meter pulses counting with analog output
Real-time flow acquisition with pulses output
power supply
24 Vac/dc
+ 4..20 mA
proportional pulses
Contaimpulsi
Flow meter with
analog output
pulsed output
counter
reed relay output (< 40 Hz)
or NPN (<10 kHz)
Z170
Z190
Real-time flow acquisition with pulses output
Differential temperature control with 4.20 mA signals
4..20 mA
CHANNEL 2
4..20 mA
Sensore
heater control
output
regulator
CHANNEL 1
4..20 mA
control
output
Serbatoio
CHANNEL 1
4..20 mA
CHANNEL 2
0..10 Vdc
output:
(channel 1 + channel
2)
4..20 mA
33
K109PT1000
Pt100 to DC current
Pt100 to DC current / voltage
Pt1000 to DC current
/ voltage isolator converter isolator converter (high precision) / voltage isolator converter
K120RTD
K109TC
Pt100, Ni100 to DC current
converter (loop powered)
TC to DC current / voltage isolator
converter with settable threshold
ORDER CODES
Model
Accessories / Software
K109PT
K-BUS (Page 34)
K-SUPPLY (Page 34)
K109PT-HPC
K-BUS (Page 34)
K-SUPPLY (Page 34)
K109PT1000
K-BUS (Page 34)
K-SUPPLY (Page 34)
K120RTD
K-BUS (Page 34)
K-SUPPLY (Page 34)
S117P (Page 34-41 )
K109TC
K-BUS (Page 34)
K-SUPPLY (Page 34)
19,2..30 Vdc
Yes
Yes
21..25 mA (@ 24 Vdc)
500 mW
14 bit
Optical - digital
50 – 60 Hz (settable)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac @ 3-way (50 Hz, 1 min)
Digital (optocoupler)
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 1 output
0,1% (max range)
< 100 ppm/K
Fault
Alarm
Programmable fault and cut-off
Insertable filter
19,2..30 Vdc
Yes
Yes
21..25 mA (@ 24 Vdc)
500 mW
14 bit
Optical - digital
50 – 60 Hz (settable)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac @ 3-way (50 Hz, 1 min)
Digital (optocoupler)
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 1 output
0,1% (max range)
< 100 ppm/K
Fault
Alarm
Programmable fault and cut-off
Insertable filter
19,2..30 Vdc
Yes
Yes
21..25 mA (@ 24 Vdc)
500 mW
14 bit
Optical - digital
50 – 60 Hz (settable)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac @ 3-way (50 Hz, 1 min)
Digital (optocoupler)
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 1 output
0,1%
< 100 ppm/K
Fault, alarm
DIP switch error
Programmable fault and cut-off
Insertable filter
19,2..30 Vdc
Yes
Yes
21..25 mA (@ 24 Vdc)
500 mW
14 bit
Optical – digital
50 – 60 Hz (settable)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac @ 3-way (50 Hz, 1 min)
Digital (optocoupler)
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 2 outputs
0,1%
< 100 ppm/K
CE, UL-UR CSA
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
CE
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
CE
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
Loop powered (5..30 Vdc)
21..25 mA (@ 24 Vdc)
500 mW
14 bit
Optical - digital
50 – 60 Hz (settable)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 1 output
0,1%
< 100 ppm/K
Fault
Alarm
RTD type / connection, filter, measure range, error, output inversion,
over-range
CE
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
Pt100
IEC 751 standard / EN 60751 –
ITS90
Range: -150..+650 °C
Min span: 50 °C
Current on transmitter: 900 μA
Connection: 2,3,4 wire
Max cable resistance: 20 Ω
Pt100
IEC 751 standard / EN 60751 –
ITS90
Range: -200..+160 °C
Min span: 20 °C
Current on transmitter: 900 μA
Connection: 2,3,4 wire
Max cable resistance: 20 Ω
Pt1000
EN 60751/A2 – ITS90
Range: -200..+210 °C
Min span: 30 °C
Current on transmitter: < 350 μA
Connection: 2,3,4 wire
Max cable resistance: 50 Ω
Pt100 EN 60751/A2 – ITS90
Range: -200..+650 °C
Min span: 20 °C
Connection: 2,3,4 wire
Ni100
Range: -60..+250°C
Min span: 20 °C
Connection: 2,3,4 wire
Thermocouple
Type: J,K,E,N,S,R,B,T (ITS90)
Min span: 100 °C
Impedance: 10 MΩ
Semiconductor sold joint
ADC: 13 bit
Accuracy: 0,15 °C
GENERAL DATA
Power supply
Power on side terminals
Hot swapping
Max current consumption
Max consumption
A/D conversion
Transmission
Rejection
Programming
Filter
Dimension (w x h x d)
Galvanic isolation
Isolation technique
Data processing
Color
Enclosure
Weight
Operating temperature
Connections
Protection degree
Channels
Accuracy
Thermal drif
LED
Embedded functions
Approvals
Norms
Programmable fault and cut-off
Insertable filter
CE, UL-UR CSA
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
INPUT DATA
Type
CONVERTERS
AND INTERFACES
K109PT-HPC
PANEL
MOUNTING UNITS
K109PT
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
K-LINE • ISOLATORS - TEMPERATURE CONVERTERS
Max voltage ± 32V
Absolute value
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Min load resistance: 2 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Max load resistance: 500 Ω
Protection: 25 mA
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Min load resistance: 2 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Max load resistance: 500 Ω
Protection: 25 mA
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Min load resistance: 2 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Max load resistance: 500 Ω
Protection: 25 mA
CURRENT
Range: 4..20 / 20..4 mA (2 wire)
Load resistance: 1 kΩ
Resolution: 0,5 μA (15 bit+sign)
Protection: 30 mA
Static relay
Response time (10-90%)
D/A conversion, resolution
< 50 ms (without filter)
< 200 ms (with filter)
1 mV, 2 μA
< 50 ms (without filter)
< 200 ms (with filter)
1 mV, 2 μA
< 50 ms (without filter)
< 200 ms (with filter)
1 mV, 2 μA
< 220 ms (without filter)
< 620 ms (with filter)
1 mV, 2 μA
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Min load resistance: 2 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Max load resistance: 500 Ω
Nominal voltage: 24 Vac/dc
Current: 60 mA
Overvoltage protection: 50 V
Settable hysteresys / alarm trip
< 40 ms (without filter)
< 88 ms (with filter)
1 mV, 2 μA
MEASUREMENT
INSTRUMENTATION
OUTPUT DATA
Type
CONVERTERS AND INTERFACES
34
K LINE • ISOLATORS – DIGITAL AND ANALOG CONVERTERS
K109UI
K109S
DC current/voltage
to current/voltage
isolator converter
DC current/voltage to
current/voltage isolator
converter (2 wire power
transducer)
K109LV
K111
K112
DC low voltage to
Frequency thresDigital sensor
current/voltage iso- hold with 2 outputs amplifier with 2 outlator converter
puts
ORDER CODES
K109UI
K-BUS (Pag. 35)
K-SUPPLY (Pag. 35)
K109S
K-BUS (Pag. 35)
K-SUPPLY (Pag. 35)
K109LV
K-BUS (Pag. 35)
K-SUPPLY (Pag. 35)
K111
K-BUS (Pag. 35)
K-SUPPLY (Pag. 35)
K112
K-BUS (Pag. 35)
K-SUPPLY (Pag. 35)
Power supply
Side Power
Hot swapping
Current consumption
19,2.. 30 Vdc
Yes
Yes
22 mA (24 Vdc)
19,2.. 30 Vdc
Yes
Yes
22 mA (24 Vdc)
19,2.. 30 Vdc
Yes
Yes
< 25 mA
19,2.. 30 Vdc
Yes
Yes
< 25 mA
Power consumption
A/D Conversion
Rejection
Settings
Filter
Dimensions (w x h x d)
Isolation
Isolation technique
Data processing
Colour
Enclosure
Weght
Operating temperature
Connections
Protection degree
Precision class
Thermal drift
Status indicators
Special functions
500 mW
14 bit
50 o 60 Hz (configurable)
DIP Switches
Added for stable reading
6,2 x 93,1 x 102,5 mm
1,5 KVac (3-way)
Digital (optocoupler)
32 bit floating point
Nero
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP 20
0,1%
< 120 ppm/K
Fault, alarm
Root extraction
Signal inversion
Scale settable
Linearization
CE, UL-UR CSA
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
19,2.. 30 Vdc
Yes
Yes
23 mA (24 Vdc); 45 mA (with aux
power)
500 mW
14 bit
50 o 60 Hz (configurable)
DIP Switches
Added for stable reading
6,2 x 93,1 x 102,5 mm
1,5 KVac (3-way)
Digital (optocoupler)
32 bit floating point
Nero
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP 20
0,1%
< 120 ppm/K
Fault, alarm
Root extraction
Signal inversion
Scale settable
Linearization
CE, UL-UR CSA
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
500 mW
14 bit
50 o 60 Hz (configurable)
DIP Switches
Added for stable reading
6,2 x 93,1 x 102,5 mm
1,5 KVac (3-way)
Digital (optocoupler)
32 bit floating point
Nero
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP 20
0,1%
< 120 ppm/K
Fault, alarm
Fault configuration,
Filter
500 mW
14 bit
50 o 60 Hz (configurable)
DIP Switches, software
Configurable
6,2 x 93,1 x 102,5 mm
32 bit floating point
Nero
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP 20
500 mW
14 bit
50 o 60 Hz (configurable)
DIP Switches
Power, threshold, error
Frequency divider
Medium value of N pulses (N <=
256)
Power, output state
CE
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
CE
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
CE
EN 50081-2, EN 50082-2, EN
61010-1, EN 60742
1
Contact IEC 1131.2 (type 1)
Namur (DIN 19234, EN 60947-56)
NPN / PNP (12 o 22 V) 2/3 wires
Reed
Photocell
Max voltage: ±28 Vdc
Frequency: Max 20 kHz, min 1
pulse every 116 minutes
1
Contact IEC 1131.2 (type1)
Namur (DIN 19234, EN 60947-56)
NPN / PNP (12 o 22 V) 2/3 wires
Reed
Photocell
Max frequency: 400 Hz
2
N.2 threshold channels, PNP, BJT,
Mosfet;
Max load: 60 mA / 24 Vdc
2
PNP e NPN simultaneous channels
Max current 200 mA
Max voltage 30 V (continuous), 50
V (pulse)
Model
Accessories / Software
GENERAL DATA
Approvals
Norms
6,2 x 93,1 x 102,5 mm
1,5 KVac (3-way)
Digital (optocoupler)
32 bit floating point
Nero
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP 20
INPUT DATA
Channels
Type
1
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5/
0..15 / 0..30 V (inversion as well)
Impedance: 110 kΩ - 325 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Impedance: 35 Ω
1
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Impedance: 110 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Impedance: 35 Ω
1
SHUNT
Range: ±25, 50, 60, 75, 80, 100,
120, 150, 200, 250, 300, 400, 500,
1000, 2000 mV (via Dip switches)
Absolute value
± 32 V (400 mW limitation)
± 30 V (limitation 400 mW)
± 50 V
1
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Min load resistance: 2 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Max load resistance: 500 Ω
Protection: 25 mA
< 40 ms (without filter)
< 88 ms (with filter)
1
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Min load resistance: 2 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Max load resistance: 500 Ω
Protection: 25 mA
< 40 ms (without filter
< 88 ms (with filter)
1
VOLTAGE
Range: 0..10 / 10..0 / 0..5 / 1..5 V
Min load resistance: 2 kΩ
CURRENT
Range: 4..20 / 20..4 / 0..20 / 20..0
mA
Max load resistance: 500 Ω
Protection: 25 mA
< 25 ms (without filter)
< 55 ms (with filter)
OUTPUT DATA
Channels
Type
Response time (10-90%)
35
K107USB
K-SUPPLY
RS485 RS485 serial
isolator repeater
RS232 RS485 serial
isolator converter
RS485 USB serial
isolator converter
Redundant power supply
module
ORDER CODES
Model
K107A
K107B
K107USB
Accessories / Software
K-BUS (Page 34)
K-SUPPLY (Page 34)
K-BUS (Page 34)
K-SUPPLY (Page 34)
K-BUS (Page 34)
K-SUPPLY (Page 34)
19,2.. 30 Vdc
Yes
Yes
22 mA (24 Vdc)
500 mW
50 – 60 Hz (programamble)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac @ 3-way (50 Hz, 1 min)
Digital (optocoupler)
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 1 output
Power ON
Data ok
Inverted connection
Automatic handshake
Baud rate: 1.200..115.200 bps
19,2.. 30 Vdc
Yes
Yes
22 mA (24 Vdc)
500 mW
50 – 60 Hz (programamble)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac @ 3-way (50 Hz, 1 min)
Digital (optocoupler)
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 1 output
Power ON
Data ok
Inverted connection
Automatic handshake
Baud rate: 1.200..115.200 bps
Via USB port
Yes
60 mA
19,2.. 30 Vdc
Yes
Yes
50 – 60 Hz (programamble)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac (USB ( RS485)
Digital (optocoupler)
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
1 input, 1 output
Power ON
Data ok
Inverted connection
50 – 60 Hz (programamble)
DIP switch, I2C
Insertable
6,2 x 93,1 x 102,5 mm
1,5 kVac
32 bit floating point
Black
PBT
45 g
-20..+65 °C
Clamp terminals / bus
IP20
2 inputs, 1 output
Input switch on threshold
Alternate input polarity
Compliance to USB 1.1 and 2.0
Plug&play for WIN 98, 2000 and XP
Differential mode filter
Overvoltages protection
Power supply redundant connection
CE
EN 50081-2, EN 50082-2, EN 61010-1, EN
60742, EN 61000-6-4, EN 61000-6-2
K-SUPPLY
GENERAL DATA
Power supply
Power on side terminals
Hot swapping
Max current consumption
Max consumption
Rejection
Programming
Filter
Dimension (w x h x d)
Galvanic isolation
Isolation technique
Data processing
Color
Enclosure
Weight
Operating temperature
Connections
Protection degree
Channels
LED
Communication
Embedded functions
Approvals
Norms
CE, UL-UR CSA
EN 61010-1, EN 60742, EN 61000-2, EN
61000-4
CE, UL-UR CSA
EN 61010-1, EN 60742, EN 61000-2, EN
61000-4
CE
EN 61010-1, EN 60742, EN 61000-2, EN
61000-4
SERIAL
Half duplex, 31 nodes, terminal, protection
up to 30 Vdc
SERIAL
RS232B, protection up to 30 Vdc
SERIAL
POWER SUPPLY
USB interface, standard USB 1.0/ 2.0 com- 2 inputs with shared negative terminal
pliance, USB A and MINI USB B connection Pass-through each input can be accessed
by 2 pairs of terminals
Max current per terminal: 4 A
Positive inputs protected by an external
fuse of recommended sizing
SIDE A
Type
CONVERTERS
AND INTERFACES
K107B
PANEL
MOUNTING UNITS
K107A
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
K-LINE • ISOLATORS – SERIAL CONVERTERS AND ACCESSORIES
SIDE B
SERIAL
SERIAL
SERIAL
RS485 half duplex, 31 nodes, terminal, pro- RS485 half duplex, 31 nodes, terminal, pro- RS485, max 31 nodes, spring cage termitection up to 30 Vdc
tection up to 30 Vdc
nal block
K-BUS
Expandable power supply connector (EN 60175)
Each expandable connector K-BUS allows inserting two modules. K-BUS are
inserted on guide settings them to the top and round them at the bottom.
POWER SUPPLY TECHNIQUE
K Line signal conditioners can be powered in 3 different ways: by the spring cage
terminal block (24 Vdc direct from power supply) or by SMART SUPPLY system.
SMART SUPPLY system is based on expandable KBUS connector..
ORDER CODES
Code
K-BUS
Description
2 slot expandable power supply connector
POWER SUPPLY
Max voltage drop: 300 mV
S117P
T120, T121 and K120RTD
configuration toolkit
T120, T121 and K120RTD configuration toolkit including S117P (USB –
RS232/TTL converter), PM002411 (S117P connecting cable), EASY-LP (programming software)
ORDER CODES
Code
Description
S117P
T120, T121 and K120RTD configuration toolkit
MEASUREMENT
INSTRUMENTATION
Type
CONVERTERS AND INTERFACES
36
Z-LINE • ISOLATORS – ANALOG CONVERTERS
Z109REG
Z109REG2•Z109REG2-H
Z109UI2
Z109S
Universal
isolator/converter
Universal isolator/converter
with advanced functions
DC Current/Voltage to DC
Current/Voltage isolator/converter
DC Current isolator
ORDER CODES
Models
Z109REG
-ER (square root extraction)
Programming & Accessories
Page 41
Z109REG2 (9..40 Vdc/19..28 Vac)
Z109REG2-H (85..265 Vac/dc)
-ER (square root extraction)
Page 41
Z109UI2
Z109S
Page 41
Page 41
10..40 Vdc
19..28 Vac; (50..60 Hz)
9..40 Vdc
19..28 Vac; (50..60 Hz)
20 Vdc, not regulated
2,5 W
20 Vdc, not regulated
2,5 W
1.500 Vac, 3 way
Against pulse overvoltages 400W/ms
1.500 Vac, 3 way
Against pulse overvoltages 400W/ms
Power supply
Power supply
35 ms (11 bit)..140 ms (16 bit)
0,1%
0,01%/°K
0,05 % (V,I), 0,01% (Vout)
DIP switch
Jumper
< 60 ms
0,2 %
0,02 % f.s. / °C
0,05 %
-10..+60°C
17,5 x 100 x 112 mm
Screw-fit removable terminals for wires up to 2.5 mm2
200 g
CE
EN 55011, EN 61000-4-2, EN 61000-4-4,
EN 50140 / 141
0..+50°C
17,5 x 100 x 112 mm
Screw-fit removable terminals for wires up to 2.5 mm2
200 g
CE
EN 55011, EN 61000-4-2, EN 61000-4-4,
EN 50140 / 141
GENERAL DATA
Power Supply
9..30 (option) - 19..40 Vdc
19..28 Vac; (50..60 Hz)
Power transducers
Max Consumption
18 Vdc, not regulated
2,5 W (max)
Galvanic Isolation & Protection
1.500 Vac, 3 way
Against pulse overvoltages 400W/ms
Status indicators
Power supply
Error
Response time
Accuracy class
Thermal stability
Linearity
Setting
300 ms
0,2%
0,02 % f.s. / °C
0,05% (V,I), 0,2% (RTD),1°C (TC)
DIP switch
Z-SETUP (PC software)
Operating Temperature
Dimension (w x h x d)
Electrical Connections
Weight
Approvals
Norms
0..+55°C
17,5 x 100 x 112 mm
Screw-fit removable terminals for wires up to 2.5 mm2
200 g
CE
EN 50081-1, EN 50082-2, EN 61010-1
Z109REG2: 9..40 Vdc;
19..28 Vac; (50..60 Hz)
Z109REG2-H: 85..265 Vac/dc
20 Vdc, not regulated
2,5 W (max)
1,6 W (24 Vdc, 20 mA)
1.500 Vac;
3.750 Vac (power supply / input -output)
Against pulse overvoltages 400W/ms
Power supply
Error
Alarm
35 ms (11 bit)..140 ms (16 bit)
0,1%
0,01%/°K
0,05% / 0.4%
DIP switch
Z-SETUP2 (PC software)
Test-3 (hand held calibrator)
-10..+60°C
17,5 x 100 x 112 mm
Screw-fit removable terminals for wires up to 2.5 mm2
200 g
CE, UL-UR CSA
EN 61000-6-4 / 2002, EN 61000-2-2/2005 /
EN 61010-1, EN 60742
INPUT DATA
Nr
Type
1
VOLTAGE (mV, V)
Bipolar 0..2, 0..5, 0..10 V
• CURRENT (mA)
Bipolar 0..20 mA
• RTD Pt100 (-200..+600°C)
• THERMOCOUPLE
Tipo J, K, R, S, T, E, B, N
• POTENTIOMETER
0,5..15 kΩ
1 analog, 1 strobe
• VOLTAGE (mV, V)
Bipolar da 75 mV a 20 V
Resolution 15 bit + sign
• CURRENT (mA)
Bipolar up to 20 mA
Resolution 1 μA
• RTD
Pt100, Pt500, Pt1000, Ni100,
KTY81,KTY84, NTC
Measure 3, 4 wires
Range: -200..600 °C
Resolution 0,1°C
• THERMOCOUPLE
Type J, K, R, S, T, E, B, N
Resolution 2,5 μV
• POTENTIOMETER: 500 Ω ..10 kΩ
• RHEOSTAT: 500 Ω..25 kΩ
• STROBE: alternative to the relay output
1
• VOLTAGE (mV, V)
Bipolar da 75 mV a 20 V
Resolution 15 bit + sign
• CURRENT (mA)
Bipolar up to 20 mA
Resolution 1 μA
1
CURRENT (mA)
2 scales: 0/4..20 mA
Max resistance load: 600 Ω
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
CURRENT (mA)
2 scales: 0/4..20 mA
1 analog, 1 relay
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
• RELAY
Alternative to the strobe NC / NA in case of
alarm
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
1
CURRENT (mA)
2 scales: 0/4..20 mA
Max resistance load: 600 Ω
OUTPUT DATA
Nr
Type
37
Z-4AI-D
Z-4TC-D
Z-SG
Potentiometer to DC
Current/Voltage
isolator/converter
DC Current isolator (self
powered by the input)
single & double channel
4 Analogue Signals
A/D Converter
4 Thermocouple
A/D Converter
Strain gauge to DC
Current/Voltage
isolator/converter
ORDER CODES
Z-4AI-D
Z-4TC-D
Z-SG
Page 41
Page 41
Page 41
Self powered by the input current
9..30 (opt.) - 19..40 Vdc
19..28 Vac (50..60 Hz)
9..30 (opt.) - 19..40 Vdc
19..28 Vac (50..60 Hz)
1.500 Vac, 2 way
1.500 Vac, 3 way
1.500 Vac, 3 way
10..40 Vdc
19..28 Vac
2W
1.500 Vac, 3 way
Power supply
Error
Data Transmission
Data reception
< 400 ms
Power supply
Error
Data Transmission
Data reception
< 400 ms
IEC 61131 PLC libraries
DIP switch (filter time,input time,
scale, serial interface)
Z-PROG (PC software)
PLC IEC 61131 libraries
DIP switch (filter time,input time,
scale, serial interface)
Z-PROG (PC software)
0..+50°C
17,5 x 100 x 112 mm
Screw-fit removable terminals
200 g
CE, UL-UR CSA
EN 55011, EN 61000-4-2, EN
61000-4-4, EN 50140 / 141
0..+50°C
17,5 x 100 x 112 mm
Screw-fit removable terminals
200 g
CE, UL-UR CSA
EN 55011, EN 61000-4-2, EN
61000-4-4, EN 50140 / 141
-10..+65°C
17,5 x 100 x 112 mm
Screw-fit removable terminals
200 g
CE
EN 61000-6-4, EN 61000-6-2, EN
61010-1, EN 60742, IEC 61131
1
1,2
RHEOSTAT
• CURRENT (mA)
2 wires: 0..300 Ω (I=6mA);
4..20 mA
0..500 Ω
(I=3,6 mA); 0..1 K Ω (I=1,8 mA)
• POTENTIOMETER
3 wires: Vref=1,8 Vcc, da 200 Ω a
1M Ω
4
VOLTAGE (V)
2..10 V f.s (bipolar)
Resolution: 16.000 points
Impedance: 100 K Ω
• CURRENT (mA)
± 20 mA (bipolar)
Resolution: 16.000 points
Impedance: 100 Ω
4
VOLTAGE
± 80 mV f.s (bipolar)
Impedance 10 M Ω
• THERMOCOUPLE
Type J, K, R, S, T, E; B, N
1 analog, 1 digital
ANALOG
Load Cell (Strain Gauge), 4 or 6
wires connections, min 87 Ω for
1..4 load cells(350 Ω) or 1..8
Load cells (1.000 Ω);
Sensibility: 1..64 mV/V
• DIGITAL
Tare calibration
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.500 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
2
DIGITAL
Channel from/to control unit (1 settable as clock or reset input)
2
DIGITAL
Channel from/to control unit (1 settable as clock or reset input)
1analog, 1 digital
• CURRENT (mA)
0..20, 4..20 mA
• VOLTAGE (V)
0..10, 0..5 Vdc
• DIGITAL
weight limit
Models
Z102
Programming & Accessories
Page 41
Z110S (single channel)
Z110D (double canne)
Page 41
GENERAL DATA
Power Supply
Max consumption
Galvanic Isolation & Protection
Status indicators
9..30 (option) - 19..40 Vdc
19..28 Vac (50..60 Hz)
2,5 W
1.500 Vac, 3 way
Against pulse overvoltages 400W/ms
Power supply
Response time
Communication Interface
40 ms
100 ms
Accuracy class
Thermal stability
Linearity
Setting
0,2%
0,02 % f.s. / °C
0,05 %
Dip-switch (zero and span)
0,1%
0,02 % f. / °C
0,1 % f.s
Operating Temperature
Dimension (w x h x d)
Electrical Connections
Weight
Approvals
Norms
0..+50°C
17,5 x 100 x 112 mm
Screw-fit removable terminals
200 g
CE
EN 55011, EN 61000-4-2, EN
61000-4-4, EN 50140 / 141
0..+50°C
17,5 x 100 x 112 mm
Screw-fit removable terminals
200 g
CE
EN 55011, EN 61000-4-2, EN
61000-4-4, EN 50140 / 141
Power supply
Error
Data Transmission
Data reception
< 10 ms
2 wire RS485
RS232, front jack, speed 2400
Baud, data bits 8, Parity: NO, Stop
bits:1
0,01%
0,0025% / °C
0,01%
Dip-switch
Software (Z-NET)
INPUT DATA
Nr
Type
CONVERTERS
AND INTERFACES
Z110
PANEL
MOUNTING UNITS
Z102
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-LINE • ISOLATORS – ANALOG CONVERTERS & A/D CONVERTERS FOR PLC
Load cells junction box
1,2
• CURRENT (mA)
4..20 mA
ORDER CODES
Code
SG-EQ4
SG-EQ4-BOXPG7
SG-EQ4-BOXPG7-05C
SG-EQ4-BOXPG7-15C
Description
Equalization and connection circuit up to 4 load cell in parallel
Equalization and connection circuit up to 4 load cell in parallel + IP66 box including mm diameter
cable glands 7 and 2 hole covers
Equalization and connection circuit up to 4 load cell in parallel + IP66 box including mm diameter
cable glands 7 and 2 hole covers + 5 meter shielded cable
Equalization and connection circuit up to 4 load cell in parallel + IP66 box including mm diameter
cable glands 7 and 2 hole covers + 15 meter shielded cable
MEASUREMENT
INSTRUMENTATION
OUTPUT DATA
Nr
Type
CONVERTERS AND INTERFACES
38
ISOLATORS • ELECTRIC PARAMETERS CONVERTERS
T201
T201DC
Z201
Z201-H
Z202
AC current to DC Current /
Voltage isolator / converter
(low voltage power supply)
AC current to DC Current
/Voltage isolator/converter
(high voltage power supply)
AC Voltage to DC Current /
Voltage isolator / converter
(low voltage power supply)
PATENT
PENDING
ORDER CODES
Models
AC Current
Transformer with
4..20mA output
(loop powered)
DC Current Transformer
with 4..20mA output
(loop powered)
T201
T201DC
Z201
Z201-H
Z202
Loop powered (5..28 Vdc)
Loop powered (5..28 Vdc)
CAT III 300 Vac
1 kVdc
85..265 Vac/dc
2,5 W
4.000 Vac
< 100ms
100ms (without filter)
600ms (with filter)
0,2%
<150 ppm/°K
19..40 Vdc / 19..28 Vac
2,5 W
3.750 Vac (output / power supply)
1.500 Vac (other circuits)
Power supply
< 200 ms
Power supply
<100 ms
19..40 Vdc / 19..28 Vac
1,5 W
3.750 Vac (from / to input)
1.500 Vac (other circuits)
Power supply
30 ms
0,3%
0,02 % f.s. / °C
0,1 %
Dip-switches
Dip-switches
Dip-switches
-20..+65°C
-10..+65°C
0..+55 °C
Faston terminals (6,3 x 0,8 mm)
Faston terminals (6,3 x 0,8 mm)
Removable terminal block, wire
size up to 2.5 mm2
38 x 40 x 20 mm
38 x 40 x 20 mm
17,5 x 100 x 112 mm
50 g
50 g
200 g
CE
CE
CE
EN 60668+A1+A2, EN 61000-6-4, EN 60668+A1+A2, EN 61000-6-4, EN 55011, EN 61000-4-2,
EN 61000-6-2, EN 61010-1
EN 61000-6-2, EN 61010-1
EN61000-4-4, EN 50140 / 141
0,2%
0,02 % f.s. / °C
0,1 %
Dip-switches
-10..+ 65 °C
Removable terminal block, wire
size up to 2.5 mm2
17,5 x 100 x 112 mm
200 g
CE
EN 55011, EN 61000-4-2,
EN61000-4-4, EN 50140 / 141
0,2%
100 ppm/K
0,05%
Dip-switches, jumper, trimmer
0..+60°C
Removable terminal block, wire
size up to 2.5 mm2
17,5 x 100 x 112 mm
140 g
CE
EN 60688+A1+A2, EN500812,
EN50082-2, EN61010-1, EN60742
1
CURRENT alternate (A)
5, 10, 15, 20, 25, 30, 35, 40 A
Max overcurrent : 800 A
Frequency: 20..1.000 Hz
Crest factor: 2
1
CURRENT direct (A)
5, 10, 15, 20, 25, 30, 35, 40 A
1
CURRENT alternate (A)
0..5, 0..10 A
1
CURRENT alternate (A)
0..5, 0..10 A
1
VOLTAGE alternate (V)
Range 0..500 Vac, 41 scales
Input impedance 2.000 Ω/V
Frequency 10 Hz..1kHz
1
CURRENT (mA)
4..20 mA (loop powered)
1
CURRENT (mA)
4..20 mA (loop powered)
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.500 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA
(active/passive)
Max load resistance: 600 Ω
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.500 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA
(active/passive)
Max load resistance: 600 Ω
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.500 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA
(active/passive)
Max load resistance: 600 Ω
4..20 mA (Z202-LP)
GENERAL FEATURES
Power Supply
Power consumption
Galvanic Isolation & Protection
Status indicators
Response time
Accuracy class
Thermal stability
Linearity
Settings
Operating Temperature
Connections
Dimension (w x h x d)
Weight
Approvals
Norms
0,2%
115 ppm/°K
INPUT DATA
Nr
Type
OUTPUT DATA
Nr
Type
T201 – connection scheme
T201DC – Connection scheme
Installation kit for 35 mm
rail and faston terminal
blocks included
Loop powered 6..100 Vdc
PLC
Frequency
20 Hz..1 kH
Max instant
overcurrent: 800 A
Nr 8 settable scales
via dip-switch:
0-5 / 0-10 / 0-15 /
0-20 / 0-25
0-30 / 0-35 / 0-40A
PLC
Charge
current
identification
Configuration and accessories
Nr 8 settable
mono-bipolar scales
via dip-switch:
0-5 / 0-10 / 0-15 /
0-20 / 0-25
0-30 / 0-35 / 0-40
Wire
Ø max 12,5 mm
Battery connector
for current transformer
(for T201DC)
Order code: BC-CT
39
AC Voltage to DC
AC Voltage to DC curCurrent/Voltage
rent isolator/converter
isolator/converter (4..20mA loop powered)
(high power supply)
Z202-H
Z203
S203T
S203TA
Single Phase
Network Analyzer
Advanced 3-phase network analyzer // RS485
(input from special CT)
Advanced 3-phase network analyzer // RS485
(input up to 5 Arms)
Z202-LP
Z203
S203T
TA15 (f.s. 15 A, 0,1%)
TA25 (f.s. 25 A, 0,1%)
TA100 (f.s. 100 A, 0,1%)
S203TA
10..40 Vdc
19..28 Vac (50..60 Hz)
2,5 W
3.750 Vac (from / to input)
1.500 Vac (other circuits)
10..40 Vdc
19..28 Vac (50..60 Hz)
2,5 W
3.750 Vac from/to measure input
1.500 Vac other circuits
4 kV (ESD)
Power, fail, RS485 communication
10..40 Vdc
19..28 Vac (50..60 Hz)
2,5 W
3.750 Vac from/to measure input
1.500 Vac other circuits
4 kV (ESD)
Power, fail, RS485 communication
400 ms
RS485, 2 wires, 1.200..115.000
bps
ModBUS RTU protocol
400 ms
RS485, 2 wires, 1.200..115.000
bps
ModBUS RTU protocol
0,2%
0,2%
Dip-switches
Software (Z-NET)
-10..+ 65 °C
-20..+ 65 °C
-10..+65 °C
Removable terminal block, max
Removable terminal block, max
Removable terminal block, max
2
2
wire size 2.5 mm
wire size 2.5 mm
wire size 2.5 mm2 Rear IDC10
connector for Z-PC backplane
RS232 frontal Jack (ModBUS)
17,5 x 100 x 112 mm
17,5 x 100 x 112 mm
17,5 x 100 x 112 mm
140 gr
140 gr
140 gr
CE
CE
CE, UL-UR CSA
EN 60688+A1+A2, EN500812,
EN 60688+A1+A2, EN500812,
EN 61000-6-4/2002, EN 61000-6EN50082-2, EN61010-1, EN60742 EN50082-2, EN61010-1, EN60742 2/2002, EN 61010-1
Dip-switches
Software (Z-NET)
-10..+65 °C
Removable terminal block, max
wire size 5,08 mm2
Dip-switches
Software (Z-NET)
-10..+65 °C
Removable terminal block, max
wire size 5,08 mm2
105 x 89 x 60 mm
200 g
CE
EN 61000-6-4/2002, EN 61000-62/2002, EN 61010-1, EN 60742
105 x 89 x 60 mm
200 g
CE
EN 61000-6-4/2002, EN 61000-62/2002, EN 61010-1, EN 60742
1
• VOLTAGE alternate (V)
Range 0..500 Vac, 41 scales
Input impedance 2.000 Ω/V
Frequency 10 Hz..1kHz
1
• VOLTAGE alternate (V)
Range 0..500 Vac, 41 scales
Input impedance 2.000 Ω/V
Frequency 10 Hz..1kHz
1 (6 measures)
• VOLTAGE alternate (V)
0..500 Vac max
(50-60 Hz)
• CURRENT alternate (A)
0..5 A (rms)
1
• VOLTAGE alternate (V)
Up to 600 Vac
• CURRENT alternate (A)
15, 25, 100 mA(rms)
By special CT (TA15, TA25,
TA100)
1
• VOLTAGE alternate (V)
Up to 600 Vac
• CURRENT alternate (A)
Up to 5A
1
• VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.500 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA
(active/passive)
Max load resistance: 600 Ω
1
4..20 mA (loop powered)
1 (6 measures)
• VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.500 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA
Analog retransmission of : Vrms,
Irms, P, Q, cosФ
1
• VOLTAGE (V)
4 scales: 0..5, 0..10 Min
• CURRENT (mA)
2 scales: 0/4..20 mA
(active/passive)
Analog retransmission of: Vrms,
Irms, P, Q, S, f, cosФ, Energy
1
VOLTAGE (V)
4 scales: 0..5, 0..10 Min
• CURRENT (mA)
2 scales: 0/4..20 mA
(active/passive)
Analog retransmission of: Vrms,
Irms, P, Q, S, f, cosФ, Energy
GENERAL FEATURES
Power Supply
85..265 Vac/dc
Loop powered (5..28 Vdc)
Power consumption
Galvanic Isolation & Protection
<1,5 W
4.000 Vac
<1 W
4.000 Vac
Status indicators
Power supply
Power supply
Response time
Communication Interface
< 100 ms
< 100 ms
Accuracy class
Thermal drift
Linearity
Settings
0,2%
150 ppm/K
0,05%
Dip-switches, jumper, trimmer
0,3%
150 ppm/K
Operating Temperature
Connections
Dimension (w x h x d)
Weight
Approvals
Norms
Power supply
Fail
Data Transmission
Data reception
< 10 ms
RS485, 2 wires, 1.200..115.000
bps
RS232, 2.400 bps ModBUS RTU
protocol
0,5%
Dip-switches, jumper, trimmer
INPUT DATA
Nr
Type
CONVERTERS
AND INTERFACES
ORDER CODES
Models
Programming & Accessories
Z202-LP
PANEL
MOUNTING UNITS
Z202-H
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
ISOLATORS • ELECTRIC PARAMETERS CONVERTERS
MEASUREMENT
INSTRUMENTATION
OUTPUT DATA
Nr
Type
CONVERTERS AND INTERFACES
40
ISOLATORS • CONVERTERS - TEMPERATURE TRANSMITTERS
Z109PT2
Z109TC
RTD to DC
Current/Voltage
isolator/converter
TC to DC
Current/Voltage
isolator/converter
ORDER CODES
T120
T121
FlexTop / FlexTop ISO (EX)
PT100 and NI100 to DC current
TC/RTD to DC Current
Temperature transmitters,
transmitter (4..20mA output transmitter (4..20mA output EExIIA to DC current transmitter
loop powered) non-isolated
loop powered)
(4..20mA output loop powered)
Isolated
Model
Z109PT2
Z109TC
T120
T121
FLEXTOP-EX (standard)
FLEXTOP ISO-EX (universal)
-C (configured version)
FlexTop (programming toolkit
Programming & Accessories
Pag. 43
Pag. 43
S117P (programming toolkit)
S117P (programming toolkit)
9..40 Vdc,
19..28 Vac (50..60 Hz)
2,5 W
1.500 Vac, 3 way
Against pulse overvoltages
400W/ms.
Power Supply
Fail
Out of range
35..140 ms
9..30 (opt.) - 19..40 Vdc
19..28 Vac (50..60 Hz)
2,5 W
1.500 Vac, 3 way
Against pulse overvoltages
400W/ms.
Power Supply
Fail
5..30 Vdc (loop powered)
7..30 Vdc (loop powered)
Standard: 8..35 Vdc (loop powered)
Iso: 6,5..35 Vdc (loop powered)
No
1,5 kVac
Isolation: 3,75 KVac;
GENERAL FEATURES
Power supply
Power Consumption
Galvanic Isolation & Protection
Status indicators
Response time
330 ms
Fault sensor
<220 ms (without filter)
<620 ms (with filter)
16 bit
0,1%
<1s
0,7 s
Ø 43,7 x 20 mm
Ø 43,7 x 20 mm
Ø 44 x 19 mm (FlexTop-EX)
Ø 44 x 26,3 mm (FlexTop ISO-EX)
CE
CE
CE, Namur NE 21,
Demko EEx ia IIC T5/T6 ATEX II 1G
(EEx versions)
EN50081-1, EN50081-2 EN50014,
EN50020, EN 61326
Thermal drift
11..15 bit + sign
0,1% (RTD)
0,3% (voltage output)
0,02 % f.s. / °C
Linearity
0,1 %
Settings
DIP Switches: range (f.s input f.s
selection); output (range)
Operating Temperature
Connections
Dimensions
-10..+60°C
Removable terminal block, max
wire size 2.5 mm2
17,5 x 100 x 112 mm (w x hx d)
0..+50°C
Removable terminal block, max
wire size 2.5 mm2
17,5 x 100 x 112 mm (w x hx d)
Weight
Approvals
200 g
CE
200 g
CE
Norms
EN 55011, EN 61000-4-2, EN
61000-4-4, EN 50140 / 141
EN 55011, EN 61000-4-2, EN
61000-4-4, EN 50140 / 141
EN 61000-6-4, EN 61000-6-2
EN 61000-6-4, EN 61000-6-2
1
RTD
Pt100, Pt500, Pt1000, Ni100,
KTY81, KTY84, NTC
Sensors with 2, 3, 4 wires
Excitation: 1 mA
Resolution 0,1°C
1
Thermocouples
Type: J, K, R, S, T, E, B, N
Resolution 5 μV
Fault automatic detection
1
Pt100
Standard: EN 60751/A2 (ITS-90)
Range: -200..+650°C
Min span: 20°C
Sensors with 2, 3, 4 wires
Ni100
Range: -60..+650°C
Min span: 20°C
Sensors with 2, 3, 4 wires
1
Pt100 (EN 60751/A2, 200..+650°C, min span 20°C)
Ni100 (-60..+250°C, min span
20°C)
Pt500 2,3,4 wires, range -200…
650 °C
Pt1000 2,3,4 wires, range -200…
+200°C
TC J , K, R, S, T, B, E, N
Potentiometer: 450..1.800 ohm
Voltage: -150..+150 mV
1
FlexTop-Ex
Pt100
Sensors with 2, 3, 4 wires
Standard IEC/DIN/EN 60 751-2
Range: -200/+850 °C
Min span: 25 °C
Input protection ± 35 Vdc
FlexTop ISO-Ex
RTD
Pt25..Pt1000, Ni25..Ni1000,
Cu25..Cu1000
Sensors with 2, 3, 4 wires
Thermocouple
B,E,J,K,L,T,U,IEC 584, ASTM 988
Voltage(mV, V)
Range: -10..70 mV, -0,1..1,1 V
Ohm
Range: 0..390 Ω, 0..2.200 Ω
Input protection ± 35 Vdc
1
• VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
1
• VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
1
• CURRENT (mA)
4..20, 20..4 mA (2 wire)
Resolution: 1μA, max 16 bit
Load resistance: 1 kΩ @ 26 Vdc,
21 mA
Input protection: 30 mA
1
• CURRENT (mA)
4..20, 20..4 mA (2 wire)
Resolution 2μA = 13 bit =
0.0125%
1
• CURRENT (mA)
4..20, 20..4 mA (2 wire)
Resolution 12 bit
Burn out positive / negative
Damping 0..30 s
A/D resolution
Accuracy class
0,2 % - input
0,1 % - output
0,02 % f.s. / °C -input
0,01% f.s / °C - output
1°C, 3 °C over 600 °C
0,1 % - output
DIP switches (type, zero and span
of input thermocouples, output
scale and polarity)
TC emulator
16 bit
12 bit
0,1% (min 0,1°C for RTD and 1°C 0,1%
for TC)
< 100 ppm (30 ppm typical)
Max 0,01% f.s / °C, typical 0,003%
f.s/°C
Max 0,01% f.s / °C, typical 0,003%
f.s/°C
S117P (programming toolkit: start / S117P (programming toolkit: start / SOFT-FLEX (programming toolkit)
full scale, connection and RTD
full scale, connection and RTD
Programmable Damping Technical
type, rejection, measure filter,
type, rejection, measure filter,
units selection
cable resistance, fault output /
cable resistance, fault output /
Settable tag up to 15 characters
over-range
over-range
-40..+85°C
-40..+85°C
-40..+85 °C
Clamp connection
Clamp connection
Spring loaded system
DATA INPUT
Channels
Type
DATA OUTPUT
Channels
Type
41
Z111
Z170
Z190
DC Current/Voltage to
frequency isolator/converter
Frequency to DC Current/Voltage
isolator/converter
DC Current/Voltage
duplicator/isolator
DC Current/Voltage
adder/subtractor
ORDER CODES
Models
Programming & Accessories
Z104
Page 41
Z111
Page 41
Z170
Page 41
Z190
Page 41
19..40 (9..30 opt.) Vdc;
19..28 Vac (50..60 Hz)
Yes, min 20 Vdc
2,5 W
1.500 Vac, 3 way
Input: 100mA
Against pulse overvoltages 400W/ms
Power Supply
Output (Relay attracted)
350 ms
0,2 %
0,02 % f.s. / °C
0,05 %
Dip-switch: input type, output, end scale
Trimmer: end scale setting, integration constant
19..40 (9..30 opt.) Vdc;
19..28 Vac (50..60 Hz)
Yes, min 20 Vdc
2,5 W
1.500 Vac, 3 way
Against pulse overvoltages 400W/ms
19..40 Vdc;
19..28 Vac (50..60 Hz)
Yes, min 20 Vdc
2,5 W
1.500 Vac, 3 way
Against pulse overvoltages 400W/ms
19..40 (9..30 opt.) Vdc;
19..28 Vac (50..60 Hz)
Yes, min 20 Vdc
2,5 W
1.500 Vac, 3 way
Against pulse overvoltages 400W/ms.
Power Supply
Error
250 ms
0,3%
0,01 % f.s. / °C
Power Supply
Power Supply
0,2 %
0,02 % f.s. / °C
0,05 %
DIP switch
I/O type and electrical connections
0,2 %
0,02 % f.s. / °C
0,05 %
DIP switch
I/O type and electrical connections
0..+50°C
Screw-fit removable terminals
17,5 x 100 x 112 mm
200 g
CE
EN50081-1, EN50081-2, EN61010-1
0..+50°C
Screw-fit removable terminals
17,5 x 100 x 112 mm
200 g
CE, UL-UR CSA
EN50081-1, EN50081-2, EN61010-1
0..+50°C
Screw-fit removable terminals
17,5 x 100 x 112 mm
200 g
CE, UL-UR CSA
EN50081-1, EN50081-2, EN61010-1
0..+50°C
Screw-fit removable terminals
17,5 x 100 x 112 mm
200 g
CE
EN50081-1, EN50081-2, EN61010-1
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Input impedance 1 MΩ
• CURRENT (mA)
2 scales: 0/4..20 mA
Active Input: 15 Vdc (not regulated)
Passive Input: impedance 100 Ω
1
PULSE
Contact / reed; npn 2/3 wires; pnp 3 wires
with
24 Vdc power; namur; photoelectric; hall
effect sensor, variable reluctance, 24V; TTL
Max frequency: 10 kHz
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Input impedance 500 KΩ
CURRENT (mA)
2 scales: 0/4..20 mA
Active Input: 20 Vdc (not regulated)
Passive Input: impedance 100 Ω
2
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Input impedance 500 KΩ
CURRENT (mA)
2 scales: 0/4..20 mA
Active Input: 20 Vdc (not regulated)
Passive Input: impedance 100 Ω
1
PULSE
Transistor npn open collector, 30 Vcc, 300
mA, reed relè, 30 Vdc-ac, 100 mA
Max frequency: 10 kHz
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.500 Ω
CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
2
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Input impedance 2.500 Ω
• CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
1
VOLTAGE (V)
4 scales: 0..1, 0..5, 0..10, 2..10 V
Input impedance 2.500 Ω
CURRENT (mA)
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
GENERAL DATA
Power Supply
Power transducers
Max consumption
Galvanic Isolation
Protections Input/Power Supply
Status indicators
Response time
Accuracy class
Thermal stability
Linearity
Setting
Operating Temperature
Electrical Connections
Dimension (w x h x d)
Weight
Certification
Norms
Dip-switch: input type, filter, pulses average, output
Trimmer: end scale setting (1 Hz..10KHz)
CONVERTERS
AND INTERFACES
Z104
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-LINE • ISOLATORS – PULSE CONVERTERS AND SIGNAL PROCESSORS
MEASUREMENT
INSTRUMENTATION
OUTPUT DATA
Nr
Type
PANEL
MOUNTING UNITS
INPUT DATA
Nr
Type
CONVERTERS AND INTERFACES
42
Z-LINE • ISOLATORS – RELAY CONDITIONERS
Z112A •Z112D
ON / OFF Sensors amplifier
Z113S • Z113D • Z113T
* Z-TIMER • Z-TIMER-D
DC Current / Voltage alarm
trip module
Electronic timer
ORDER CODES
Z-TIMER
Z-TIMER-D (with 2 independent times)
Page 41
Z113S (1 relay output)
Z113D (2 relay outputs)
Z113T (3 relay outputs)
Page 41
Power Supply
19..40 (9..30 opt.) Vdc;
19..28 Vac; (50..60 Hz)
19..40 (9..30 opt.) Vdc
19..28 Vac; (50..60 Hz)
12..40 Vdc ± 10 %
12..40 Vac / 115..230 Vac ± 10 % 50..60 Hz
Power transducers
Max consumption
Galvanic Isolation
Yes, active input 2 wire (min 20 Vdc)
2,5 W
Z112A: 1.500 Vac (power supply/input)
4.000 Vac (input/power supply/output)
Z112D:1.500 Vac
Yes, active input 2 wire (min 20 Vdc)
2,5 W
1.500 Vac, 3 way
Yes, active input 2 wire (min 20 Vdc)
2W
1.500 Vac (power supply/input)
4.000 Vac (input/power supply/output)
Models
Z112A (single channel)
Z112D (double channel)
Programming & Accessories
Page 41
GENERAL FEATURES
Protections Input/Power Supply
Status indicators
Power Supply
Relay attracted
Against pulse overvoltages 400W/ms.
Power Supply
Overtaking limit
Thermal stability
Linearity
Setting
±0,01% /°C
Operating Temperature
Electrical Connections
Dimension (w x h x d)
Weight
Certification
Norms
0..+50°C
Screw-fit removable terminals for wires up to 2.5 mm2
17,5 x 100 x 112 mm
200 g
CE
EN 50081-1, EN 50082-2, EN 61010-1
0..+50°C
Screw-fit removable terminals for wires up to 2.5 mm2
17,5 x 100 x 112 mm
200 g
CE
EN 50081-1, EN 50082-2, EN 61010-1
-10..+60°C
Screw-fit removable terminals for wires up to 2.5 mm2
17,5 x 100 x 112 mm
200 g
CE
EN 50081-1, EN 50082-2, EN 61010-1
1/2
PULSE
Contact optoisolated
Reed
npn 2/3 wires- 12..24 Vdc
pnp 3 wires, power supply 24 Vdc
NAMUR
Pulses 24 Vdc
Photoelectric sensor
Hall effect sensor
Max frequency 400 Hz
1
CURRENT: 0..20, 4..20 mA active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impendance: Current 100 Ω, Voltage: 500 KΩ
1
CONTACTS
START Timer
PAUSA Timer
SELECTION (Z-TIMER-D)
1/2
RELAYS
Z112A: relay SPDT 1 A - 30 Vdc o 5 A – 250 Vac (resistive
load)
Z112D: reed relay SPST, max load0,5 A – 100 Vdc-ac (10
VA resistive load)
1/2/3
Z-113A: relay SPDT, 1A – 30 Vdc load or 5 A – 250 Vac
(resistive load)
Z-113D/T: relay SPST, max load 0,1 A – 30 Vdc-ac (10VA
resistive load)
1
RELAY
SPDT 8 A – 250 Vac (resistive load)
Dip-switches: input type, output retransmission, divider circuit settable from 1 to 256
Trimmer: pulse duration (100..500ms)
±0,01% /°C
0,05 %
DIP switches: input type, functions (relays activation,
min/max value alarm)
Trimmer:
Setpoint alarms (1..100% signal control)
Delay (0,3..30 s)
Hysteresis (2..15% for full-scale)
Power Supply
Pause (relay attracted)
Timer
±0,01% /°C
DIP switches
N. 8 timer functions / relay excitation
N. 8 time scale (50 ms..10 h)
Trimmer
Time regulation
INPUT FEATURES
Nr
Type
OUTPUT FEATURES
Nr
Type
*Available until stocks last
43
Z-LINE • PROGRAMMING & ACCESSORIES
Z-SETUP2
Z109REG2 Configuration Software
• Help on line for DIP-switches configuration
• Download / Upload / module configuration
• Scale inversion
• Burn-out settings (positive or negative)
• Digital filter insertion
• Square root exctraction
• Scale conversion
• Start / end scale, digital filter
• Square root extraction
• Burn-out settings (positive or negative)
• Rejection Network Frequency 50/60 Hz
• Sampling time settings / Resolution
• 3 / 4 wires resistance measure
ORDER CODES
ORDER CODES
Programming software Z109REG (free on the website www.seneca.it)
Z-SETUP2
Programming software Z109REG2 (free on the website www.seneca.it)
S-TOOL
TEST-3
Handheld multimeter – Z109REG2 Configuration
with OLED display
• Configuration Software on CD
• Programming cable
. Accuracy: 0,1%
• Input/Output Setting parameters, range, Z109REG2
alarms
• Signal Generation / Measuring of Voltage (0-10 V) and
Current (0-20 mA) Signals
• OLED Display 128 x 64 points
• Batteries NiMh, type AA 2.650 mAh (20 h)
ORDER CODES
ORDER CODES
S-TOOL
Programming Kit includes Z-PROG, Z-SETUP, Z-SETUP2, libraries
Z-4AI-D, Z-4TC-D, Soft2000DOS/WIN, cable PM001601
TEST-3
/T
TEST-3-PK
Multimeter – Z109REG2 Configuration with OLED display
Calibration Service (SIT referred)
Precision kit with Z109REG2 programming cable and precision probes set
S117P
CONVERTERS
AND INTERFACES
Configuration KIT
EasyLP • EasyK111
T120, T121 and K120RTD programming toolkit
Plug&play configurator
Programming toolkit for T120, T121 e K120RTD inclusive of S117P (USB RS232/TTL isolator/converter),
PM002411 (connection cable for S117P), EasyLP (free
software configuration)
• Automatic or manual research of connected devices
• Use with Z107/K107USB/S107USB or other RS485
converter
• Reading / Writing / Test / Setting
• Input parameters configuration,
output and communication
• File saving
• Device data uploading
• Report (creation and printing)
PANEL
MOUNTING UNITS
Z-SETUP
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Z-SETUP
Z109REG Configuration Software
ORDER CODES
S117P
T120, T121 and K120RTD programming toolkit
EasyK111
Z-POWER
Voltage transformer with output at 19 Vac (DIN rail mounting)
Configurator for loop powered devices (K120RTD, T120, T121)
available on www.seneca.it
Configurator for K111 available on www.seneca.it
PROGRAMMING CABLES
Programming cables
• Primary Voltage 230 (115) Vac ± 10%
• Box in fiberglass auto-estinguish (V-0)
• Protection by thermo-fuse
• Dimensions 3 DIN modules(15 VA),
5 DIN modules (25 VA)
• IP 40
ORDER CODES
ORDER CODES
Z-POWER 230-15VA
Z-POWER 230-25VA
Z-POWER 115-15VA
Voltage Transformer 19 Vac, 230-15 VA
Voltage Transformer 19 Vac, 230-25 VA
Voltage Transformer 19 Vac, 115-15 VA
PM001601
PM001970
PM002240
Programming serial Cables (Z109REG, Z109REG2, Z203, Z-4AI-D, Z-SG, Z4TC-D, Z-3AO, Z-8AI, Z-8TC) (jack / DB9F)
Serial cable RS232 (K107B) (free wires / DB9F)
Programming Z109REG/ Z109REG2 / TEST-3 (jack / jack)
MEASUREMENT
INSTRUMENTATION
EasyLP
ORDER CODES
44
CONVERTERS AND INTERFACES
S-LINE • ISOLATORS – ANALOG CONVERTERS
S109REG
S109S
DC Current/Voltag
isolator/converter
DC Current isolator
S102
*
S109PT
*
Ohm to DC Current/Voltage PT100 to DC Current/Voltage
isolator/converter
isolator/converter
ORDER CODES
Models
S109REG-1-ST (power supply 115/230 Vac)
S109REG-1-X7 (with input for tacho generator 0..100 / 200 Vdc)
S109S-1-ST (power supply 115/230 Vac)
S102-1-ST (power supply 115/230 Vac)
S109PT-1-ST (power supply 115/230 Vac)
GENERAL FEATURES
Power Supply
Power transducers
Power consumption
Galvanic Isolation
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
3,5 VA
4.500 Vac
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
1,5 VA
4.500 Vac
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
3,5 VA
4.500 Vac
Status indicators
Protection degree
Electrical Connections
Accuracy
Linearity
Thermal stability
Operating Temperature
Dimension (w x h x d)
Weight
Enclosure
Mounting
Dip-switch
Trimmer
Certification
Norms
Power Supply
IP20
Screw-fit removable terminals for wires up to 2,5 mm2
±0,25%
±0,05%
±0,01% /°C
-10..+60 °C
70 x 95 x 72 mm
300 g
Type DIN 4 self-extinguishing Noryl V0
On 35 mm mounting rail (DIN 46277)
Input range and Output type
Zero and Span Input
CE
EN 50081-1, EN 50082-2, EN 61010-1
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
1,5 VA
4500 Vac (from/to power supply)
2000Vac (input/output)
Power Supply
IP20
Screw-fit removable terminals for wires up to 2,5 mm2
±0,25%
±0,05%
±0,01% /°C
-10..+60 °C
35 x 95 x 72 mm
200 g
Type DIN 2 self-extinguishing Noryl V0
On 35 mm mounting rail (DIN 46277)
Power Supply
IP20
Screw-fit removable terminals for wires up to 2,5 mm2
±0,25%
±0,05%
±0,01% /°C
0..+50 °C
52,5 x 95 x 72 mm
300 g
Type DIN 3 self-extinguishing Noryl V0
On 35 mm mounting rail (DIN 46277)
Input range and Output type
Zero and Span Input
CE
EN 50081-1, EN 50082-2, EN 61010-1
Power Supply
IP20
Screw-fit removable terminals for wires up to 2,5 mm2
±0,25%
±0,05%
±0,01% /°C
-10..+60 °C
70 x 95 x 72 mm
400 g
Type DIN 4 self-extinguishing Noryl V0
On 35 mm mounting rail (DIN 46277)
Input range and Output type
CE
EN 50081-1, EN 50082-2, EN 61010-1
CE
EN 50081-1, EN 50082-2, EN 61010-1
INPUT FEATURES
Number
Type
1
CURRENT: 0..20, 4..20 mA not standard
signals between ±14 mA and span between
2 and 20mA
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc not
standard signals between ±7 V and span
between 1 and 10 V (0..100/200 Vdc, X7
version)
Impendance: Current 100 Ω, Voltage 1 MΩ
1
CURRENT: 0..20mA and 4..20mA (active/passive)
Input impedance 20 Ω
1
1
POTENTIOMETER:
PT100 2,3 wires
Measure Range: 0..300 / 0..500 / 0..1000 Ω Measure Range: 0..100 / 0..200 / 0..400 °C
1
CURRENT: 0..20, 4..20 mA active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impedance: Current 800 Ω, Min.Voltage
Load: 1 KΩ
1
CURRENT: 0..20mA and 4..20mA (active/passive)
Max Current load: 900 Ω
1
CURRENT: 0..20, 4..20 mA active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impedance: Current 800 Ω, Min.Voltage
Load: 1 KΩ
OUTPUT FEATURES
Number
Type
*Available until stocks last
1
CURRENT: 0..20, 4..20 mA active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impedance: Current 800 Ω, Min.Voltage
Load: 1 KΩ
45
DC Current/Voltage
to frequency
isolator/converter
S111
S170
Frequency to DC
Current/Voltage
isolator/converter
*
S190
S2000
DC Current/Voltage
duplicator/isolator
DC Current/Voltage
adder/subtractor
Microprocessor
Calculation Module
ORDER CODES
S104-1-ST (115 / 230 Vac)
S111-1-ST (115 / 230 Vac)
S170-1-ST (115 / 230 Vac)
S190-1-ST (115 / 230 Vac)
S2000-1-ST (115 / 230 Vac)
S2000-23-ST (24 Vac/dc)
S-TOOL (Configuration Kit)
Power Supply
Power transducers
Power consumption
Galvanic Isolation
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
1,5 VA
4.500 Vac
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
3,5 VA
4500 Vac (from/to power supply)
200Vac (input/output)
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
1,5 VA
4500 Vac (from/to power supply)
200Vac (input/output)
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
3,5 VA
4.500 Vac
Status indicators
Power Supply
Pulses on output
115 / 230 Vac ±10%, 50-60 Hz
20 Vdc (not regulated)
3,5 VA
4500 Vac (from/to power supply)
200Vac (input/output)
Power Supply
Input frequency <3% e.s.
Input frequency< 90% e.s.
IP20
Screw-fit removable terminals for
wires up to 2,5 mm2
1
Reed contact, 2 and 3 wires npn
sensor, pnp sensor with 24 Vdc,
NAMUR sensor,24 Vdc sensor,
photoelectric sensor.
Max frequency : 680 Hz
1
CURRENT: 0..20, 4..20 mA
active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impendance: Current 1000 Ω,
Voltage 1 MΩ
Models
Programming & Accessories
GENERAL DATA
Protection degree
Electrical Connections
Accuracy
Linearity
Thermal stability
Operating Temperature
Dimension (w x h x d)
Weight
Enclosure
Mounting
DIP switch
Trimmer
Software
Certification
Norms
Power Supply
Data reception
Data transmission
IP20
IP20
IP20
IP20
Screw-fit removable terminals for
Screw-fit removable terminals for Screw-fit removable terminals for Screw-fit removable terminals for
wires up to 2,5 mm2
wires up to 2,5 mm2
wires up to 2,5 mm2
wires up to 2,5 mm2
±0,25%
±0,1%
±0,1%
±0,5%
±0,05%
±0,05%
±0,005% /°C
±0,005% /°C
±0,01% /°C
±0,01% /°C
±0,01% /°C
-10..+60 °C
-10..+60 °C
-10..+60 °C
-10..+60 °C
-10..+60 °C
52,5 x 95 x 72 mm
105 x 95 x 72 mm
70 x 95 x 72 mm
70 x 95 x 72 mm
157,5 x 95 x 72 mm
300 g
450 g
300 g
300 g
500 g
Type DIN 3 self-extinguishing
Type DIN 6 self-extinguishing
Type DIN 4 self-extinguishing
Type DIN 4 self-extinguishing
Type DIN 9 self-extinguishing
Noryl V0
Noryl V0
Noryl V0
Noryl V0
Noryl V0
On 35 mm mounting rail (DIN 46277) On 35 mm mounting rail (DIN 46277) On 35 mm mounting rail (DIN 46277) On 35 mm mounting rail (DIN 46277) On 35 mm mounting rail (DIN 46277)
Input type, integer coefficient
Input frequency, output type
Input - output type
Input - output type
Full Scale
Span A / B (weight for
adding/difference) inputs
SOFT-200 (programming software,
instruction list)
CE
CE
CE
CE
CE
EN 50081-1, EN 50082-2, EN
EN 50081-1, EN 50082-2, EN
EN 50081-1, EN 50082-2, EN
EN 50081-1, EN 50082-2, EN
EN 50081-1, EN 50082-2, EN
61010-1
61010-1
61010-1
61010-1
61010-1
CONVERTERS
AND INTERFACES
*
PANEL
MOUNTING UNITS
S104
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
S-LINE • ISOLATORS – PULSE CONVERTERS AND SIGNAL PROCESSORS
1
CURRENT: 0..20, 4..20 mA active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impendance: Current 250 Ω,
Voltage 1 MΩ
2
CURRENT: 0..20, 4..20 mA active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impendance: Current 1000 Ω,
Voltage 1 MΩ
6
2 Digital (open contact voltage 5
V, close contact current 1 mA)
• 4 Analogue (0..20, 4..20 mA),
Max load resistance 100 Ω
2
1
CURRENT: 0..20, 4..20 mA
CURRENT: 0..20, 4..20 mA
active/passive
active/passive
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impendance: Current 800 Ω,
Impendance: Current 800 Ω,
Min.Voltage Load: 1 KΩ
Min.Voltage Load: 1 KΩ
6
• 4 digital (max 300 mA, 30 Vdc)
• 2 analogue (0..20, 4..20 mA),
max resistance load 300 Ω
OUTPUT DATA
Number
Type
*Available until stocks last
1
1
NPN open collector, 300 mA 30
CURRENT: 0..20, 4..20 mA
Vdc (opt. relay), pulse duration 40 ms active/passive
VOLTAGE: 0..5, 1..5
(0..10, 2..10 opt.) Vdc
Impendance: Current 800 Ω,
Min.Voltage Load: 1 KΩ
MEASUREMENT
INSTRUMENTATION
INPUT DATA
Number
Type
46
CONVERTERS AND INTERFACES
S-LINE • ISOLATORS – RELAY CONDITIONERS
S112A•S112D•S112M
S113S•S113D•S113T
Amplifiers for ON/OFF
sensors
Trip alarm units
for analofue signals
*
S105
S108
Control relay for singlephase voltage
Control for single-phase
alternate current
with threshold
ORDER CODES
Models
S112A-1-ST (115/230 Vac, 1 input, 1 relay
output)
S112D-1-ST (115/230 Vac, 2 inputs, 2 relay
outputs)
S112M-1-ST (115/230 Vac, 1 input, 5 relay
outputs)
S112M-1-ST (115/230 Vac, 1 input, 5 relay
outputs)
S112M-23-ST (24 Vac/dc, 1 input,5 relay
outputs)
S113S-1-ST (115/230 Vac, 1 relay output)
S113D-1-ST (115/230 Vac, 2 relay outputs)
S113T-1-ST (115/230 Vac, 3 relay outputs)
S105CS1-B (230 V single-phase, output powered) S108
S105CS1-C (230 V, SPDT output)
S105TCN-1 (380 V, three phase, SPDT 5A output)
S105TCN-2 (230 V, three phase, SPDT 5 A output)
S105TCS-1 (380 V, three phase, SPDT 10 A output)
S105TCS-2 (230 V, three phase, SPDT 10 A output)
S105TCS-3 (400 V, SPDT 10 A output)
115/230 Vac ± 10%, 50/60 Hz; 24 Vac/dc
(S112M-23-ST)
20 Vdc (not regulated)
1,5 VA
115/230 Vac ± 10%, 50/60 Hz; 24 Vac
230 Vac (single phase)
230 – 400 Vac 50 Hz (three phase)
115 / 230 Vac
2 VA
1,5 VA
4.500 Vac
4.500 Vac
Network presence
Delay in recovering
Alarm
IP20
Screw-fit removable terminals for wires up to 2,5 mm2
Power Supply
Alarm relay
GENERAL DATA
Power Supply
Power transducers
Power consumption
Galvanic Isolation
Status indicators
Protection degree
Electrical Connection
Linearity
Thermal stability
Operating Temperature
Dimension (w x h x d)
Weight
Enclosure
Mounting
DIP switch
Trimmer
Certification
Norms
4.500 Vac
2.000 vac (input/output S112M)
Power Supply input/pulses output
20 Vdc (not regulated)
1,5 VA (S113S)
3,5 VA (S113D, S113T)
4.500 Vac
Power Supply
Alarms
IP20
IP20
Screw-fit removable terminals for wires up to 2,5 mm2 Screw-fit removable terminals for wires up to 2,5 mm2
IP20
Screw-fit removable terminals for wires up to 2,5 mm2
±0,1%
±0,005% /°C
0..+60 °C
52,5 x 95 x 72 mm
-10..+60 °C
52,5 x 95 x 72 mm (S112A)
70 x 95 x 72 mm (S112D, S112M)
250 g (S112A)
270 g (S112D)
280 g (S112M)
Type DIN 3 (S112A) – 4 (S112D, S112M)
self-extinguishing Noryl V0
On 35 mm mounting rail (DIN46277).
Divider circuit
Pulse length
CE
EN 50081-1, EN 50082-2, EN 61010-1
-10..+60 °C
52,5 x 95 x 72 mm (S113S)
70 x 95 x 72 mm (S113D, S113T)
290 g (S113S)
280 g (S113D)
350 g (S113T)
Type DIN 3 (S113S) – 4 (S113D, S113T)
self-extinguishing Noryl V0
On 35 mm mounting rail (DIN46277).
Input and alarm type
Threshold, delay, hysteresis
CE
EN 50081-1, EN 50082-2, EN 61010-1
-10..+60 °C
52,5 x 95 x 72 mm (S105CS, S105TCS)
70 x 95 x 72 mm (S105TCN)
250 g
1, 2
Reed contact, 2 and 3 wires npn sensor
with 12 and 24 Vdc power supply, 2 and 3
wires pnp sensor with 24 Vdc power supply,
NAMUR sensor, 24 Vdc pulse, photoelectric
sensor and HaIl effect sensor.
Input frequency: max. 400 Hz,
minimum pulse duration 2 ms
1
CURRENT: 0..20, 4..20 mA
VOLTAGE: 0..5, 1..5, 0..10, 2..10 Vdc
Impedance: Current 250 Ω, Voltage 1 MΩ
1
Single phase Voltage 230 V (S105 TCS)
Three phase Voltage 230 V
Three phase Voltage 380 V
Three phase Voltage 400 V
1, 2, 5
S112A: 1 SPDT relay, 5 A 250 Vac (resistive load)
S112D: 2 SPDT relays, 5 A 250 Vac
(resistive load)
S112M: 5 SPST reed relays, 100 Vdc/50
Vac (resistive load)
1, 2, 3
S113S: 1 SPDT relay, 5 A 250 Vac (resistive load)
S113D: 2 SPDT relays, 5 A 250 Vac
(resistive load)
S113T: 5 SPDT relays, 5 A 250 Vac
(resistive load)
1
1
S105CS: 1 SPST relay 10 A, 250 Vac (resi- 1 SPDT relay 5 A, 250 Vac (resistive load)
stive load)
S105TCN: 1 SPDT relay 5 A, 250 Vac (resistive load)
S105TCS: 1 SPDT relay 10 A, 250 Vac
(resistive load)
Type DIN 3 (S105CS, S105TCS) – 4
(S105TCN) self-extinguishing Noryl V0
On 35 mm mounting rail (DIN46277).
Threshold, recovering time
CE
EN 50081-1, EN 50082-2, EN 61010-1
350 g
Type DIN 3 self-extinguishing Noryl V0
On 35 mm mounting rail (DIN46277).
Memory
Threshold, delay, hysteresis
CE
EN 50081-1, EN 50082-2, EN 61010-1
INPUT DATA
Number
Type
1
External CT for loads > 5 A
OUTPUT DATA
Number
Type
*Available until stocks last
47
S109REG
Power Supply
for current loop
Dual Power Supply
for current loop
Galvanic Isolation for
0/4..20 mA current loop
V-I / V-I Converter
with galvanic Isolation
ORDER CODES
Models
S50-1-ST (115 / 230 Vac)
S50-3-ST (24 Vac)
S100S-1-ST (115/ 230 Vac)
S100S-3-ST (24 Vac)
S109S-1-ST (115/230 Vac)
S109REG-1-ST (115/230 Vac)
115/230 Vac ± 10%, 50/60 Hz; 24 Vac
1,5 VA
Input protected against line overvoltages
by a varistor isolation input // output at
4.500 Vac.
Output protected against short-circuit
115 / 230 Vac ± 10%, 50 / 60 Hz
3,5 VA
Input protected against line overvoltages
by a varistor isolation input // output at
4.500 Vac.
Output protected against short-circuit
115 / 230 Vac ± 10%, 50 / 60 Hz
1,5 VA
Galvanic isolation between power supply
// input-output 4500 Vac, input//output
2000 Vac
115 / 230 Vac ± 10% 50 / 60 Hz
3,5 VA
Galvanic isolation between power supply
// input //output 4500 Vac,
Current loop: 0 - 20, 4 - 20 mA
Input resistance: 20 ohm
Input Power Supply: 20 Vdc
(not regulated)
Settable by DIP-switch
• CURRENT: 0 - 20, 4 - 20 mA;
ZERO: -14..+14 mA
SPAN: 2..20 mA
• VOLTAGE: 0-5, 1-5, 0-10, 2-10 Vdc;
ZERO: -7..+7 Vdc
SPAN: 1..10 Vdc
• Input impedance: 100 ohm (current), 1
Mohm (voltage)
Settable by DIP-switch of
• CURRENT: 0 - 20, 4 - 20 mA;
• VOLTAGE: 0-5, 1-5, 0-10, 2-10 Vdc
• Max load: Current 0 – 800 Ohm,
Voltage > 1 Kohm
GENERAL DATA
Power Supply
Power consumption
Isolation and protection
Input
Output
Nr1 Regulated 24 Vdc, 40mA
Linearity
Temperature derivation
Operating Temperature
Humidity
Enclosure
< ± 0,25%
< 100 ppM/°C
-10..+ 60°C
-10..+ 60°C
-10..+ 60°C
90% at @ 40°C (non condensing)
90% @ 40°C (non condensing)
90% @ + 40°C (non condensing)
The self-extinguishing Noryl case is the The self-extinguishing Noryl case is the The self-extinguishing Noryl case is the
width of 2 DIN modules and designed to width of 3 DIN modules and designed to width of 2 DIN modules and designed to
fit on 35 mm mounting rail (DIN46277). fit on 35 mm mounting rail (DIN46277). fit on 35 mm mounting rail (DIN46277).
35 x 95 x 72 mm
52,5 x 95 x 72 mm
35 x 95 x 72 mm
150 g
300 g
200 g
Dimension (w x h x d)
Weight
Nr 2 Regulated and galvanically isolated Current loop: 0 - 20, 4 - 20 mA
24 Vdc 50 mA
Max load: 900 ohm
Power supply (output): 20 Vdc
(not regulated)
< ± 0,25%
< 100 ppM/°C
-10..+ 60°C
90% @ + 40°C (non condensing)
The self-extinguishing Noryl case is the
width of 4 DIN modules and designed to
fit on 35 mm mounting rail (DIN46277).
70 x 95 x 72 mm
300 g
CONVERTERS
AND INTERFACES
S109S
PANEL
MOUNTING UNITS
S100S
MEASUREMENT
INSTRUMENTATION
S50
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
S-LINE • REGULATED POWER SUPPLY (FOR CURRENT LOOP)
CONVERTERS AND INTERFACES
48
S-LINE • REGULATED INDUSTRIAL POWER SUPPLY
*
S70E
S90
DC /DC Converter
Switching
Power Supply
S200
S200REG
Dual Regulated
Power Supply
Switching Power Supply
(adjustable)
ORDER CODES
Models
S70E (110 Vdc)
S90-1-ST (115 / 230 Vac)
S200-1-ST (115 / 230 Vac)
S200REG/16 from 14 to 18 Vdc, max
current 500 mA
S200REG/24 from 22 to 26 Vdc, max
current 350 mA
GENERAL DATA
Power Supply
110 Vdc ± 10%
115 / 230 Vac ± 10% 50 / 60 Hz
115 / 230 Vac ± 10% 50 / 60 Hz
115 / 230 Vac ± 10% 50 / 60 Hz
30 W
35 VA
Galvanic isolation input//output @2.500 V Input protected against line overvoltages
by a varistor isolation input // output at
4.500 Vac.
Output protected against short-circuit or
overload
Regulated 24 Vdc 1,3A
Regulated 24 Vdc 1A
7,5 VA
Input protected against line overvoltages
by a varistor isolation input // output at
4.500 Vac.
Output protected against short-circuit or
overload
+ 15 Vdc 350 mA
- 15 Vdc 75 mA
10 VA
Input protected against line overvoltages
by a varistor isolation input // output at
4.500 Vac.
Output protected against short-circuit or
overload
S200REG/16 : 14 / 18 Vdc 500 mA
S200REG/24 : 22 / 26 Vdc 350 mA
- 10..+ 60 °C
90% @ 40 °C (non condensing)
The self-extinguishing Noryl case is the
width of 4 DIN modules, with heatsink on
the upper side, and is designed to fit on
35 mm mounting rail (DIN46277).
70 x 95 x 105 mm
1 kg
- 10..+ 60 °C
90% @ 40 °C (non condensing)
The self-extinguishing Noryl case is the
width of 4 DIN modules, with heatsink on
the upper side, and is designed to fit on
35 mm mounting rail (DIN 46277).
70 x 95 x 105 mm
0,7 Kg
- 10..+ 60 °C
90% @ 40 °C (non condensing)
The self-extinguishing Noryl case is the
width of 4 DIN modules, with heatsink on
the upper side, and is designed to fit on
35 mm mounting rail (DIN 46277)
70 x 95 x 105 mm
0,7 Kg
Power consumption
Isolation and protection
Output
Operating Temperature
Humidity
Enclosure
Dimension (w x h x d)
Weight
*Available while stocks last
- 10..+ 60 °C
90% @ 40 °C (non condensing)
The self-extinguishing Noryl case can be
mounted on the back of the panel by
means of screws or on 35 mm mounting
rail (DIN46277).
90 x 120 x 113 mm
1,5 Kg
49
S-LINE • REGULATED INDUSTRIAL POWER SUPPLY (PANEL MOUNTING)
ORDER CODES
Models
GENERAL DATA
Power Supply
Power Transducers
Power consumption
Input
Output
Display
Accuracy
Stability on changes of power
supply
Rejection of frequency Network
Operating Temperature
Storage temperature
Humidity
Enclosure
Dimension (w x h x d)
Weight
S200G-1-ST (230 Vac)
Signal Generator 0 – 20 mA
S200D (115 / 230 Vac)
3 ½ Digits Display with Power Supply
230 Vac ± 10% 50 - 60 Hz
115-230 Vac ± 10% 50 - 60 Hz
+15 Vdc 350 mA e -15 Vdc 75 mA
11 VA
CURRENT: 0 - 20, 4 - 20 mA
VOLTAGE: 0 - 5, 1 - 5 Vdc
IMPEDANCE: 100 ohm for current input, 1 Mohm for
voltage input
Dual Regulated Power Supply +15 Vdc (350 mA), -15
Vdc 75 (mA)
40 dB
-10..+ 60 °C
-25..+ 60 °C
90% @ 40 °C (non condensing)
"V0" self-extinguishing NORYL, shock-proof cabinet,
suitable for front panel installation, dimension 96x96 mm
96 x 96 x 117 mm
1 Kg
40 dB
-10..+ 60 °C
-25..+ 60 °C
90% @ 40 °C (non condensing)
"V0" self-extinguishing NORYL, shock-proof cabinet,
suitable for front panel installation, dimension 96x96 mm
96 x 96 x 117 mm
0,8 Kg
S200DP (115 / 230 Vac)
3 ½ Digits Display with Power Supply and Setpoint
115-230 Vac ± 10% 50 - 60 Hz
+15 Vdc 350 mA e -15 Vdc 75 mA
11 VA
11 VA
CURRENT: 0 - 20, 4 - 20 mA
VOLTAGE: 0 - 5, 1 - 5 Vdc
IMPEDANCE: 100 ohm for current input, 1 Mohm for
voltage input
Dual Regulated Power Supply +15 Vdc (350 mA), -15
0/4 - 20 mA, Voltage loop at 24 Vdc
Vdc 75 (mA)
Set point 0/1 – 5 Vdc (potentiometer)
3 1/2 digits display, high brightness red led, 14 mm high 3 1/2 digits display, high brightness red led, 14 mm high 3 1/2 digits display, high brightness red led, 14 mm high
Zero and span display settable by multi turn trimmer
Zero and span display settable by multi turn trimmer
Zero and span display settable by multi turn trimmer
Display range from -999 to 1999
Display range from -999 to 1999
Display range from -999 to 1999
Decimal point available through jumpers
Decimal point available through jumpers
Decimal point available through jumpers
< 0,3%
< 0,3%
< 0,3%
0,01%/20%
0,01%/20%
0,01%/20%
40 dB
-10..+ 60 °C
-25..+ 60 °C
90% @ 40 °C (non condensing)
"V0" self-extinguishing NORYL, shock-proof cabinet,
suitable for front panel installation, dimension 96x96 mm
96 x 96 x 117 mm
1 Kg
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
3 ½ Digits Display with Power
Supply and Setpoint adjustment
CONVERTERS
AND INTERFACES
3 ½ Digits Display
with Power Supply
S200DP
PANEL
MOUNTING UNITS
Signal Generator
0 – 20 mA
S200D
MEASUREMENT
INSTRUMENTATION
S200G
CONVERTERS AND INTERFACES
50
S400 • PROTECTIONS AGAINST OVERVOLTAGES
ORDER CODES
Models
S400CL
S400LV
S400HV
Electronic protections
for 4 - 20 mA current loop
Electronic protections
for mains lines up to 35 vac/dc
Electronic protections for
mains 220 vac lines
S400CL
S400HV
S400LV
1-module size box to be mounted into to 35mm bar,
DIN 46277, in UL94 V0 plastic material, with
transparent protection that can be plumbed.
< 35Vcc supply for 4-20mA current loop
1-module size box to be mounted into to 35mm bar,
DIN 46277, in UL94 V0 plastic material, with
transparent protection that can be plumbed.
low voltage lines up to 35Vdc or ac (+/-15%)
2-module size box to be mounted into to 35mm bar,
DIN 46277, in UL94 V0 plastic material, with
transparent protection that can be plumbed.
220Vac lines (+/-15%)
47 V (rms) ( wire to wire )
90 V ( wire to wire and wire to ground )
> 5000 A
1500 A
47 V (rms) ( wire to wire )
90 V ( wire to wire and wire to ground)
> 5000 A
1500 A
1A
275 V (rms) (wire to wire)
470 V (wire to wire and wire to ground)
> 5000 A
1500 A
6,3 A
approx. 2.2 Vdc
90 x 18.5 x 73 mm
150 g
Output Current Loop
90 x 18.5 x 73 mm
150 g
Output 24 Vdc (max 800 mA)
90 x 36 x 73 mm
200 g
Output 230 Vac (max 5 A)
Input Current Loop
Input 24 Vdc
Input 230 Vac
GENERAL DATA
Enclosure
Rated Voltage
Operating voltage
Discharge voltage
Discharge current
Breaking capability
Max load
Loop voltage drop
Dimension (w x h x d)
Weight
Electrical Connections / front view
Application schemes
51
SPECIFICHE TECNICHE
Z109REG
CODICI DʼORDINE
• Z109REG (24 Vdc/ac)
• Z109REG-ER (24 Vdc/ac) - estrazione di radice già programmata
ELETTRICHE
Alimentazione
3
CONFIGURAZIONE E NORME
Programmazione software
• Lettura, configurazione, download e salvataggio
DIP Switch
• Tipo, zero e span ingresso
• Tipo uscita
Norme CE
EN50081-2, EN50082-2, EN61010-1
COMUNICAZIONE, ELABORAZIONE, MEMORIA
Campionamento
3 letture al secondo
Memoria dati
EEPROM per i parametri di configurazione, tempo ritenuta 10 anni
Ingresso e uscita (tipo e range)• Termocoppia - J: -200..+1000°C; K: -200..+1300°C;
R: 50..+1750°C; S: -50..+1750°C; T: -200..+ 400°C; E: 150..+800°C; B: 0..+1800°C; N: -200..+1300 °C;
• Termoresistenza - Pt100 -200..+600 °C
• Potenziometro: 0,5..15 Kø
• Tensione (bipolari) 0..200 mV; 0..2, 0..5; 0..10 V
• Corrente (bipolari) 0..20 mA
Impedenza di ingresso
• 2.5 ø in corrente
• 1 Mø in tensione
Risoluzione di ingresso
• Termocoppia: risoluzione 5 ÌV, rilevamento
automatico interruzione TC
• Termoresistenza: misura a 3 fili, corrente di eccitazione 0.56 mA,
risoluzione 0.1 °C, rilevamento automatico interruzione cavi o RTD
• Potenziometro: fondo scala min. 500 ø, risoluzione 0,01 % ds
• Tensione :risoluzione 0.01 %ds
• Corrente: risoluzione 0.01 %ds
Impedenza di uscita
• Impedenza loop in corrente 0..600 ø
• Carico per uscita in tensione > 2.5 Kø
Risoluzione di uscita
• 0.025% per 0..20 mA / 0..10 V / 0..5 V
• 0.032% per 4..20 mA / 2..10 V / 1..5 V
Errori
• Precisione 0.2 %ds. in tensione e corrente, 0.2 % altrimenti
• Linearità: 0.05 % per ingresso in tensione, corrente e potenziometro,
0.2°C per termoresistenza, 1°C per termocoppie salvo 3°C per TCB
oltre 600°C
• Stabilità termica: 0.02%/°C
• Compensazione giunto freddo: 2°C tra 10 e 40°C
DIMENSIONI E INGOMBRI
COLLEGAMENTI ELETTRICI
Assorbimento max
Isolamento
Protezione
Alimentazione trasduttori
Indicatori di stato
Categoria di installazione
Grado di inquinamento
Grado di protezione
• 19..40 Vdc / 19 - 28 Vac, 50-60 Hz
• 9..30 Vdc (opzionale)
2.5 W
Alimentazione // ingresso // uscita: 1.500 Vac
• Ingressi: in corrente 200 mA continuativi, rimanenti 60 V continuativi
• Alimentazione e uscite: contro sovratensioni impulsive 400 W/ms
min 18 Vdc 20 mA
• Power
• Error
II
2
IP20
TERMOMECCANICHE
Temperatura
Funzionam.: 0..+ 50°C
Umidità
30..90 % a +40 °C (non condensante)
Peso
200 g circa
Custodia
Nylon 6 caricato 30 % fibra vetro – classe autoestinguenza V0
Connessioni
Morsetti estraibili polarizzati a vite per conduttori fino a 2.5 mm2
Montaggio
Guida 35 mm DIN 46277
ALIMENTAZIONE
La tensione di alimentazione
deve essePANEL
MOUNTING
re compresa tra 10 e 40 Vdc), o tra 12 e
28 Vac. I limiti
superiori non devono
UNITS
essere superati, pena gravi danni al
modulo.
INTERFACCIA SERIALE
Il collegamento per lʼinterfaccia seriale e
per lʼalimentazione del modulo è presente anche nel con-nettore sul fondo dello
strumento e ne permette il collegamento
in bus tramite lʼapposito supporto da installare nella guida DIN
USCITE
PANEL MOUNTING UNITS
52
Wide range of displays
• High brightness display
• Multi-standard input
• Easy programming
DIGITAL INDICATORS
S401
S401
Display: 2,7” OLED, 128x64 pixel
ModBUS RTU interface
Dimension: 96x48x40 mm
Power supply: 10-40 Vdc / 19-28 Vac
S315
S315
S311D
S311A
S315
Display: 4, 6, 8, 4+7 digit LED
Analog input: mA, V, Ohm, Pt100, TC
Re-transmitted analog output and open collector digital output
Input measures totalization – integration
Dimension: 96x48x98 mm
Power supply: 80-265 Vac; 10-40 Vdc / 19-28 Vac
Power transducers
Optional board: nr 2 SPDT relay alarm, ModBUS RTU
interface, reset digital input
S311AK
S311AK
Display: 4 digit LED
Analog input: mA
Max error: 0,05%
Dimension: 96 x 48 x 40 mm
Power supply: by loop (max 30 V)
Max drop voltage: 7 V
Version: standard and IP66
S311D
S200 / S201
S301
S301B
Display: 4 digit LED (+ bargraph,
S301B)
Analog input: V, mA, TC, Pt100,
Ohm
Analog output: mA, V
(re-transmitted)
Nr 3 SPDT relay alarms / Nr 4 open
collector alarms (optional)
Dimension: 96x48x148 mm (S301);
96x96x148 mm (S301B)
Power supply: 115-230 Vac or 24
Vac/dc
Power transducers
S311AK
Display: 3 ½ digit LED
Analog input: mA, V
Max error: 0,05%
Power supply: 10-40 Vdc / 19-28 Vac
Power transducers: 17 V
Dimension: 96 x 48 x 40 mm
Version: standard and IP66
S200
S201
Display: 3 ½ digit LED
Input: mA, V
Potentiometer setpoint
(DP versions)
Dimension: 96x48x117 mm
Power supply: 115-230 Vac
Power transducers
Display: 4, 6, 8, 4+7 digit LED
Digital input: contact, npn, pnp, namur, photoelectric, variable reluctance, 24 V pulse, TTL
Re-transmitted analog output and open collector digital output
Input measures totalization – integration
Dimension: 96x48x98 mm
Power supply: 80-265 Vac; 10-40 Vdc / 19-28 Vac
Power transducers
Optional board: nr 2 SPDT relay alarm, ModBUS RTU
interface, reset digital input
S301 / S301B
S311A
S310 / S320A
S310
S320A
Display: 3 ½ digit LED
Analog input: V, mA, TC, Pt100
Analog output: mA (optional)
Nr 1 or 2 SPDT relay alarms
Dimension: 96x48x148 mm;
96x96x148 mm
Power supply: 115-230 Vac or 24
Vac/dc
Power transducers
S114
S114B
Display: 6, 8 digit LED
Input: 1-CH pulse sensor (reed, npn,
pnp, namur, 24 Vdc pulse,
photoelectric), max frequency 450 Hz
Bidirectional counter (S144B)
Dimension: 96x48x148 mm
Power supply: 115-230 Vac; 24 Vac/dc
Option: reset input
S144I
S144I
S164
S164
Display: 6, 8 digit LED
Input: 1-CH mA, V
Re-transmitted output: 1-CH pulse (npn
open collector)
Dimension: 96x48x148 mm
Power supply: 115-230 Vac; 24 Vac/dc
Power transducers
Display: 3 ½ digit (indicator) + 7 digit
(totalizer)
Input: 1-CH mA, V
Dimension: 96x48x148 mm
Power supply: 115-230 Vac; 24 Vac/dc
S21
S30
BATCH CONTROLLERS
S20N
S20N
Display: 5 digit double LED
Digital input: 3-CH (control: start, stop,
reset) + 1-CH (sensor: reed, npn,
namur, hall effect, photoelectric, max
frequency 1 kHz)
Digital output: 2-CH SPDT relay
Dimension: 144x72x130 mm
Power supply: 115-230 Vac; 24 Vac/dc
Versions: standard, Ex, IP65
S21
Display: 5 digit double LED
Digital input: 3-CH (control: start, stop,
reset) + 1-CH (sensor: reed, npn,
namur, hall effect, photoelectric, max
frequency 1 kHz)
Digital output: 2-CH SPDT relay
Self-powered clock
Dimension: 144x72x130 mm
Power supply: 115-230 Vac; 24 Vac/dc
Versions: standard, Ex, IP65
Display: 5 digit double LED
Digital input: 3-CH (control: start, stop,
reset) + 1-CH (sensor: reed, npn,
namur, hall effect, photoelectric, max
frequency 1 kHz)
Digital output: 2-CH SPDT relay
Serial interface (option)
Parallel interface for printer
Dimension: 144x144x130 mm
Power supply: 115-230 Vac; 24 Vac/dc
Versions: standard, IP65
SEQUENCER
OPERATOR PANELS
S6000
ZTOP
S6000
LCD back-lightened display: 2 raws x 16 chars
Input: 6-CH digital (contact), 2-CH analog (mA)
Output: 6-CH SPST relay (actuators), 1-CH SPDT relay
(signalling), 1-CH open collector (contact), 2-CH analog (mA, V)
Interface: isolated RS232
Instruction list programming
Dimension: 144x72x121 mm
Power supply: 115-230 Vac; 24 Vac/dc
Sensor supply: 24 Vdc, 30 mA (isolated)
S30
ZTOP
Graphic display: LCD 3,8” / 5,6”,
STN 5,6”
Resistive touchscreen
Resolution 320x240 pixel
Alarms, events log control
Dimension: 149x109x61 mm
(ZTOP03); 187x147x79 mm
(ZTOP05, ZTOP11)
CONVERTERS
AND INTERFACES
S114 / S114B
PANEL
MOUNTING UNITS
TOTALIZERS
MEASUREMENT
INSTRUMENTATION
• Vac / Vdc power supply
• Power transducers
• Calibration service
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
53
PANEL MOUNTING UNITS
54
S401
•
•
•
•
HIGH BRIGHTNESS: 70 cd/m2
HIGH DEFINITION: 128x64 pixel
SPACE SAVING: 96x48x40 mm
VISUALIZATION: up to 30 measurements
(float, integer, boolean)
• PROGRAMMING: via software or front key menu
• MASTER FUNCTIONS: 27 math functions, 20
readings from slave modules, 10 writings on slave
devices, alarms control on threshold
• REDUCED CABLING: Nr. 2 RS485 ModBUS
interfaces (1 Master / 1 Slave)
OLED display
with ModBUS interface
S-LINE – OLED INDICATOR
S401
Temperature control
Z-4RTD
Z-4TC
ModBUS RTU indicator with OLED 2,7" display
S401
GENERAL DATA
10-40 Vdc / 19-28 Vac
1W
1.500 Vac
2 x RS485 ModBUS RTU Master / Slave
Speed 1.200..115.200 bps
RAM: 256 byte
XRAM: 4kB
Flash: 32 kB
Scratchpad: 128 byte
Power supply
Power consumption
Isolation
Communication interface
Memory
ModBUS RTU RS485,
max 1.200 m
Signal wireless re-transmission
Short range
300 m
10 mW
100 kbps
434 – 869 Mhz
AO / DO
VISUALIZATION AND MEASURE
OLED 2,7”, 128 x 64 pixel
3 menu keys
Up to 20 measures (max 3 per page) free settable
Address, parity, baud rate, response delay time, transmission delay time, data receiving timeout
RAM, 20 x 4 byte
Display
Front keys
Visualization
Serial communication
AI / DI
Data storage
THERMOMECHANICS DATA
RS485 - ModBUS RTU
PLC local control
Z-PC Line I/O modules
PLC
-10..+60°C
PPO self-exinguished, panel mount, DIN 43700
IP65
Removable terminals
96x48x40 mm
91x45 mm
200 g
Operating temperature
Case
Front protection
Connections
Dimension (w x h x d)
Panel dimension
Weight
SETTINGS, NORMS
Max free settings 20 query, data management via Z-NET3
Communication parameters, language, contrast, brightness, range, offset, measure type
EN 61000-6-4/2002, EN 61000-6-2/2005, EN 610101/2001
Software / query
Settings
Conformity
ModBUS RTU
Slave
ModBUS RTU
Master RS485,
max 1.200 m
Sensors / Alarms
ORDER CODES
Code
Model
Power supply
Process control
S401
-L
Description
ModBUS RTU indicator with OLED 2,7" display
10-40 Vdc; 19-28 Vac
OPERATING VIEW MODE
ModBUS RTU
Master RS485, max
1.200 m, 32 nodi
Flow transmitter with
analog or pulse output
In view mode the indicator displays the values of the quantities
defined on the display list; it may view 1, 2 or 3 data for screen.
Transmitters with
ModBUS RS485 output
Level transmitters
with analog ouput
Voltage 223. 83 V
Voltage 223. 83 V
Current 11.400 mA
Voltage
223. 83 V
Current
11.400 mA
Temperature 20.120 °C
55
S-LINE • LED INDICATORS
4 DIGIT DISPLAYS
AND I/V ANALOG INPUT
ANALOG INPUT: 4-20 mA
POWER SUPPLY: By loop
ANALOG INPUT: mA, V
POWER SUPPLY:
10-40 Vdc, 19-28 Vac
4, 6, 8, 11 DIGIT
UNIVERSAL ANALOG
INPUT DISPLAYS
4, 6, 8, 11 DIGIT
FREQUENCY / DIGITAL
INPUT DISPLAYS
ANALOG INPUT: mA, V, potentiometer, Pt100, TC
(J,K,R,S,T,B,E,N)
POWER SUPPLY:
10-40 Vdc, 19-28 Vac;
80-265 Vac
DIGITAL INPUT: Reed, npn, pnp, namur, photoelectric,
variable reluctance, 24 V pulse, TTL
POWER SUPPLY:
10-40 Vdc, 19-28 Vac;
80-265 Vac
MEASUREMENT
INSTRUMENTATION
PANEL
MOUNTING UNITS
CONVERTERS
AND INTERFACES
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
4 DIGIT LOOP POWERED
DISPLAYS
MODULAR
DISPLAY
UNIVERSAL
INPUT
RE-TRANSMITTED
OUTPUT
WIDE RANGE
SUPPLY
HIGH
ACCURACY
RELAY
ALARMS
INTEGRATION
& TOTALIZATION
ADVANCED
FUNCTIONS
PANEL MOUNTING UNITS
56
S-LINE
SERIE –
S S315
- INDICATORI
• S311AK- –TOTALIZZATORI
COMPACT INDICATORS
COMPATTI
S315
S315/IP66
S311AK
S311AK/IP66
4 digit loop powered display
with 4-20 mA input signal
4 digit loop powered display with 420 mA input signal and IP66 case
4 digit display with mA/V
analog input
4 digit display with mA/V analog
input, IP66 case
GENERAL DATA
By loop (max 30 V)
Max 7 V
Power supply
Drop voltage
Power transducers
Power consumption
Isolation
Memory
10-40 Vdc, 19-28 Vac
10-40 Vdc, 19-28 Vac
EEPROM, 10 years
Max 16 V, 25 mA
Max 0,9 W
1.500 Vac between measure port and power supply
EEPROM, 10 years
Max 16 V, 25 mA
Max 0,9 W
1.500 Vac between measure port and power supply
EEPROM, 10 years
4 digit, red LEDs
4 digit, red LEDs
4 digit, red LEDs
4 digit, red LEDs
3 (down, up, menù)
0,05%
0,005%/°K
0,05%
16 bit
< 1%
3 (down, up, menù)
0,05%
0,005%/°K
0,05%
16 bit
< 1%
3 (down, up, menù)
0,05%
0,005%/°K
0,05% (0-10 V, 0-20 mA)
16 bit
3 (down, up, menù)
0,05%
0,005%/°K
0,05% (0-10 V, 0-20 mA)
16 bit
1
4-20 mA
1
4-20 mA
1
Voltage: 0-10 V (protection ±30 Vdc), impedance ~25 kΩ, ADC 16 bit, settable scales:
0-10, 1-5 V ecc.
Current: 0-20 / 4-20 mA (protection ±25
mA), impedance ~20 Ω, ADC 16 bit, settable scales 0-20.
1
Voltage : 0-10 V (protection ±30 Vdc),
impedance ~25 kΩ, ADC 16 bit, settable
scales: 0-10, 1-5 V ecc.
Current: 0-20 / 4-20 mA (protection ±25
mA), impedance ~20 Ω, ADC 16 bit, settable scales 0-20.
-10..+65°C
PPO self-extinguish, DIN 43700
IP65 (frontal)
Removable 2-way screw terminals, 5,08mm
pitch, 3 way screw terminals, 5,08 mm pitch
96 x 48 x 40 mm
91x45 mm
200 g
-10..+65°C
ABS RAL 7035
IP66
-10..+65°C
PPO self-extinguish, DIN 43700
IP65 (frontal)
Removable 2-way screw terminals, 5,08mm
pitch, 3 way screw terminals, 5,08 mm pitch
96 x 48 x 40 mm
91x45 mm
200 g
-10..+65°C
ABS RAL 7035
IP66
Front keys (enabling password, input type,
electric start / full scale, display start / full
scale, decimal point, filter)
By password
CE
EN 61000-6-4, EN 64000-6, EN 61010-1,
EN 60742
Front keys (enabling password, input type,
electric start / full scale, display start / full
scale, decimal point, filter)
By password
CE, UL, NEMA
EN 61000-6-4, EN 64000-6, EN 61010-1,
EN 60742, EN 50298, En 60259, EN
62262, UL 94 HB, NEMA 1, 4, 4X, 6
Front keys (enabling password, input type,
electric start / full scale, display start / full
scale, decimal point, filter)
By password
EN
61000-6-4, EN 64000-6, EN 61010-1, EN
60742
Front keys (enabling password, input type,
electric start / full scale, display start / full
scale, decimal point, filter)
By password
CE, UL, NEMA
EN 61000-6-4, EN 64000-6, EN 61010-1,
EN 60742, EN 50298, En 60259, EN
62262, UL 94 HB, NEMA 1, 4, 4X, 6
EEPROM, 10 years
By loop (max 30 V)
Max 7 V
VISUALIZATION AND MEASURE
Display
Status indicators
Front buttons
Accuracy
Stability
Linearity error
A/D resolution
EMI
INPUT DATA
Nr
Type
THERMOMECHANICS DATA
Operating temperature
Enclosure
Protection degree
Terminal block
Dimension (w x h x d
Panel cut-out
Weight
130x89x60 mm
280 g
130x89x60 mm
280 g
SETTINGS, NORMS
Programming
Access protection
Approvals
Norms
ORDER CODES
Codice
Model
Accessories
S315
Codice
Model
Accessories
S311AK-4-L
IP66
/IP66x2
Description
4 digit loop powered indicator, 4-20 mA input
ABS case fast mounting with IP66 protection degree, for field application, dimension 130 x 80 x 60 mm
ABS case fast mounting with IP66 protection degree, for field application, dimension 180 x 130 x 75 mm (double format)
IP66
/IP66x2
Description
4 digit indicator, mA/V analog input, power supply 10-40 Vdc, 19-28 Vac
ABS case fast mounting with IP66 protection degree, for field application, dimension 130 x 80 x 60 mm
ABS case fast mounting with IP66 protection degree, for field application, dimension 180 x 130 x 75 mm (double format)
57
S-LINE
SERIE
– S311A
S - INDICATORI
– MODULAR INDICATORS
- TOTALIZZATORI
– TOTALIZERS
COMPATTI
WITH UNIVERSAL ANALOG INPUT
S311A-11
8 digit universal analog input
4 digit universal analog input
6 digit universal analog input
indicator - totalizer and analog output indicator - totalizer and analog output indicator - totalizer and analog output
11 digit universal analog input
indicator - totalizer and analog output
80-265 Vac (H version) 10-40 Vdc / 19-28
Vac (L version)
Max 18 V, 25 mA
3W
1.500 Vac
ModBUS RTU slave (optional board)
EEPROM 10 years, storage memory
GENERAL DATA
Power supply
Power transducers
Power consumption
Isolation
Communication interface
Memory
80-265 Vac (H version) 10-40 Vdc / 19-28
Vac (L version)
Max 18 V, 25 mA
3W
1.500 Vac
ModBUS RTU slave (optional board)
EEPROM 10 years, storage memory
80-265 Vac (H version) 10-40 Vdc / 19-28
Vac (L version)
Max 18 V, 25 mA
3W
1.500 Vac
ModBUS RTU slave (optional board)
EEPROM 10 years, storage memory
80-265 Vac (H version) 10-40 Vdc / 19-28
Vac (L version)
Max 18 V, 25 mA
3W
1.500 Vac
ModBUS RTU slave (optional board)
EEPROM 10 years, storage memory
LED, 4 digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
0,1%
0,01%/K
0,2°C (Pt100)
0,5° (TC J,K,E,N,T)
1°C (TC R,S)
2°C (TC B)
0,05% (0-10 V, 0-20 mA)
±1,5°C
LED, 6 digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
0,1%
0,01%/K
0,2°C (Pt100)
0,5° (TC J,K,E,N,T)
1°C (TC R,S)
2°C (TC B)
0,05% (0-10 V, 0-20 mA)
±1,5°C
LED, 8 digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
0,1%
0,01%/K
0,2°C (Pt100)
0,5° (TC J,K,E,N,T)
1°C (TC R,S)
2°C (TC B)
0,05% (0-10 V, 0-20 mA)
±1,5°C
LED, 11 (4+7) digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
0,1%
0,01%/K
0,2°C (Pt100)
0,5° (TC J,K,E,N,T)
1°C (TC R,S)
2°C (TC B)
0,05% (0-10 V, 0-20 mA)
±1,5°C
1
Voltage: 0-10 V
Active / passive current: 0-20 / 4..20 mA
Potentiometer: 1..100 kΩ
Pt100 2,3,4 wire (IEC 751 / EN 60751 –
ITS90)
Thermocouple J,K,R,S,T,B,E,N
14 bit
20 ms
Yes: by digital input and front keys
1
Voltage: 0-10 V
Active / passive current: 0-20 / 4..20 mA
Potentiometer: 1..100 kΩ
Pt100 2,3,4 wire (IEC 751 / EN 60751 –
ITS90)
Thermocouple J,K,R,S,T,B,E,N
14 bit
20 ms
Yes: by digital input and front keys
1
Voltage: 0-10 V
Active / passive current: 0-20 / 4..20 mA
Potentiometer: 1..100 kΩ
Pt100 2,3,4 wire (IEC 751 / EN 60751 –
ITS90)
Thermocouple J,K,R,S,T,B,E,N
14 bit
20 ms
Yes: by digital input and front keys
1
Voltage: 0-10 V
Active / passive current: 0-20 / 4..20 mA
Potentiometer: 1..100 kΩ
Pt100 2,3,4 wire (IEC 751 / EN 60751 –
ITS90)
Thermocouple J,K,R,S,T,B,E,N
14 bit
20 ms
Yes: by digital input and front keys
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms + Nr 1
RS485ModBUS RTU slave port + nr 1 reset
digital input
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms + Nr 1
RS485ModBUS RTU slave port + nr 1 reset
digital input
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms + Nr 1
RS485ModBUS RTU slave port + nr 1 reset
digital input
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms + Nr 1
RS485ModBUS RTU slave port + nr 1 reset
digital input
-10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
-10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
-10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
-10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
VISUALIZATION AND MEASURE
Display
Status indicators
Front Buttons
Display errors
Accuracy
Stability
Linearity error
Cold joint
INPUT DATA
Nr
Type
Resolution
Sampling time
Reset (totalizer)
OUTPUT DATA
Nr
Type
A/D Resolution
Optional board
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
S311A-8
CONVERTERS
AND INTERFACES
S311A-6
PANEL
MOUNTING UNITS
S311A-4
SETTINGS, NORMS
Software / settings
Calibration
Norms
ORDER CODES
Code
Model
Display
Power Supply
Options
Software
S311A
-4 / -6 / -8 / -11
-H / -L
-O
/T
EASYS311A
Description
Universal analog input indicator - totalizer and analog output
4 / 6 / 8 / 4+7 digit
80-265 Vac / 10-40 Vdc; 19-28 Vac
Optional board: nr 2 SPDT relay alarms, ModBUS RTU interface, reset input
Calibration service
Plug&play software configurator via serial converter to RS485 (i.e. S107USB)
MEASUREMENT
INSTRUMENTATION
THEMOMECHANICS DATA
Operating temperature
Enclosure
Protection degree
Terminal blocks
Dimension (w x h x d
Panel cut -out
Weight
PANEL MOUNTING UNITS
58
S-LINE
SERIE– S
S311D
- INDICATORI
– MODULAR INDICATORS
- TOTALIZZATORI
– TOTALIZERS
COMPATTI
WITH DIGITAL / FREQUENCY INPUT
S311D-4
S311D-6
S311D-8
S311D-11
4 digit frequency / digital input
indicator - totalizer and analog output
6 digit frequency / digital input
indicator - totalizer and analog output
8 digit frequency / digital input
indicator - totalizer and analog output
11 digit frequency / digital input
indicator - totalizer and analog output
80-265 Vac (H version)
10-40 Vdc / 19-28 Vac (L version)
Max 18 V, 25 mA
Max 3 W
1.500 Vac
ModBUS RTU slave (optional board)
EEPROM 10 years storage memory
80-265 Vac (H version)
10-40 Vdc / 19-28 Vac (L version)
Max 18 V, 25 mA
3W
1.500 Vac
ModBUS RTU slave (optional board))
EEPROM 10 years storage memory
80-265 Vac (H version)
10-40 Vdc / 19-28 Vac (L version)
Max 18 V, 25 mA
3W
1.500 Vac
ModBUS RTU slave (optional board)
EEPROM 10 years storage memory
80-265 Vac (H version)
10-40 Vdc / 19-28 Vac (L version)
Max 18 V, 25 mA
3W
1.500 Vac
ModBUS RTU slave (optional board)
EEPROM 10 years storage memory
LED, 4 digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
LED, 6 digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
LED, 8 digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
LED, 11 (4+7) digit
2 alarm leds (enabled threshold trips)
3 navigation keys
Over range, fault sensor
1
Contact, Reed, Npn 2 / 3 wire, Pnp 3 wire
with 24 Vdc power supply, Namur, photoelectric, variable reluctance, 24V pulse, TTL
0.001 – 9.9999 Hz
Yes: by digital input and front keys
1
Contact, Reed, Npn 2 / 3 wire, Pnp 3 wire
with 24 Vdc power supply, Namur, photoelectric, variable reluctance, 24V pulse, TTL
0.001 – 9.9999 Hz
Yes: by digital input and front keys
1
Contact, Reed, Npn 2 / 3 wire, Pnp 3 wire
with 24 Vdc power supply, Namur, photoelectric, variable reluctance, 24V pulse, TTL
0.001 – 9.9999 Hz
Yes: by digital input and front keys
1
Contact, Reed, Npn 2 / 3 wire, Pnp 3 wire
with 24 Vdc power supply, Namur, photoelectric, variable reluctance, 24V pulse, TTL
0.001 – 9.9999 Hz
Yes: by digital input and front keys
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms
Nr 1 RS485 ModBUS RTU slave port
Nr 1 reset digital input
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms
Nr 1 RS485 ModBUS RTU slave port
Nr 1 reset digital input
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms
Nr 1 RS485 ModBUS RTU slave port
Nr 1 reset digital input
1
0-10 V (min 1K)
0-20 / 4-20 mA (max 500 ohm)
10.000 points
Nr 2 SPDT 220 Vac (5A resistive, 2 A
inductive) relay alarms
Nr 1 RS485 ModBUS RTU slave port
Nr 1 reset digital input
10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
10..+60 °C
PPO self-extinguish DIN 43700
IP65 (frontal)
Removable, step 3,5 – 5,08 mm
96x48x98 mm
91x45 mm
200 g
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
Display parameters, alarms, signals,
timeout, reset, trips
Yes, factory-made
EN 61000-6-4/2002, EN 61000-6-2/2005,
EN 61010-1/2001
GENERAL DATA
Power supply
Power transducers
Power consumption
Isolation
Communication interface
Memory
VISUALIZATION AND MEASURE
Display
Status indicators
Front Buttons
Display errors
INPUT DATA
Nr
Type
Frequency
Reset (totalizer)
OUTPUT DATA
Nr
Type
Resolution
Optional board
THERMOMECHANICS DATA
Operating temperature
Case
Protection degree
Terminal blocks
Dimension (w x h x d
Panel dimension
Weight
SETTINGS, NORMS
Software / settings
Calibration
Norms
ORDER CODES
Code
Model
Display
Power supply
Options
S311D
-4 / -6 / -8 / -11
-H / -L
-O
/T
Descrizione
Frequency / digital input indicator - totalizer and analog output
4 / 6 / 8 / 4+7 cifre
80-265 Vac; 19-28 Vac
Optional board: nr 2 SPDT relay alarms, ModBUS RTU interface, reset input
Calibration service
59
S-LINE • DIGITAL INDICATORS
3 1/2 digit indicator with power
supply and control signal
S310 / S320A
4 digit digital indicators
3½ digit digital indicators
with relay alarms
GENERAL DATA
115-230 Vac ±10%, 50-60 Hz
+15 Vdc, 350 mA; -15 Vdc, 75 mA; 24 Vdc, 500 mA
11 VA
40 dB (50-60 Hz)
Power supply
Power transducers
Max consumption
Rejection
Communication interfaces
Memory
115-230 Vac ±10%, 50-60 Hz; 24 Vac/dc±10%
4 VA
115-230 Vac ±10%, 50-60 Hz; 24 Vac/dc±10%
20 Vdc, 20 mA
3,5 VA
RS232 / RS485, 9.600 bps, max 1.000 m, 31 devices
EEPROM, 10 years
VISUALIZATION AND MEASURE
Display
3 ½ digit
14 mm LED
4 digit
20 elements bargraph (50 mm)
14 mm LED
0,1% (current / voltage)
0,2% (RTD, potentiometer)
0,01%/°C
0,01%..0,5%
1°C (20-40 °C)
3 ½ digit
14 mm LED
Accuracy
0,3%
Thermal stability
Linearity
Cold junction
0,01%/°C
1
Current: 0-20, 4-20 mA
Voltage: 0-5, 1-5, 0-10, 2-10 V
1
Voltage: from 200 mV up to 4 V (4 scales)
Current: up to 20 mA
Potentiometer: up to 15 kΩ
Pt100 (-200..+650 °C)
TC J,K,R,S,T,B
3 readings per second
1
Current: 0-20, 4-20 mA
Voltage: 0-2, 0,4-2, 0-5, 1-5 Vdc (0-10. 2-10 Vdc on demand)
Pt100 (option)
TC k,J (option)
1
Accurate potentiometer setpoint (0/1-5 Vdc; 4-20 mA active)
1
Current: 0-20, 4-20 mA
Voltage: 0-5, 0-10, 1-5, 2-10 V
Da 0,025% a 0,032%
1
Current: 0-20, 4-20 mA (re-transmitted, isolated,
active / passive)
3, 4
SPDT relay 5 A – 250 Vac
Open collector 35 Vdc – 200 mA
1, 2
SPDT relay 5 A – 250 Vac (resistive load)
-10..+55°C
0..50°C
V0 Self-extinghuished Noryl shockproof
0,3%
0,01%/°C
INPUT DATA
Nr
Type
Frequency
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
S301 / S301B
CONVERTERS
AND INTERFACES
S200D / S200DP / S201D / S201DP
(ANALOG) OUTPUT DATA
Nr
Type
Resolution
THERMOMECHANICS DATA
Operating temperature
Case
Front protection
Connections
Dimension (w x h x d)
Panel dimension (w x h)
Weight
-10..+60°C
V0 Self-extinghuished Noryl shockproof
IP41
Removable terminals
96 x96 x 117 mm
91 x 91 mm
750 g
96 x 48 x 148 mm (S301); 96 x 96 x 148 mm (S301B)
Screw terminals
96 x 48 x 148 mm (S310); 96 x 96 x 148 mm (S320A)
PANEL
MOUNTING UNITS
(ALARMS) OUTPUT DATA
Nr
Type
500 g (S301); 600 g (S301B)
SETTINGS, NORMS
Visualization zero and span (-999..+1.999)
Decimal point
Conformity
CE
CE
ORDER CODES
Codice
Model
S200D
S200DP
S201D
S201DP
Code
Model
Power supply
Opzioni
Code
Model
Power supply
Options
Visualization zero and span (-999..+1.999), alarms
Full scale, alarms, input type, decimal point, re-transmitted
output
CE
Description
3 1/2 digit indicator, 115 / 230 Vac, Power transducers ±15 Vdc
3 ½ digit indicator, 115 / 230 Vac, Power transducers ±15 Vdc, setpoint
3 ½ digit indicator, 230 Vac, Power transducers 24 Vdc
3 ½ digit indicator, 230 Vac, Power transducers 24 Vdc, setpoint
S301
S301 B
-1-R / -23-R
-AOC-S
-AR-S
S310 / S310A / S310AA
S320A
-1-ST / -23-ST
-PT
-TC (J,K)
-R
Description
4 digit digital indicator, universal analog input, re-transmitted output
4 digit + bargraph digital indicator, universal analog input, re-transmitted output
115 / 230 Vac / 24 Vac/dc
Nr 4 open collector alarms, serial output
Nr 2 SPDT relay alarms, serial output
Description
3 ½ digit digital indicator, V,I input / + 1 SPDT alarm relay / + 2 SPDT alarm relay
115 / 230 Vac / 24 Vac/dc
Pt100 input
TC (J or K) input
Re-transmitted output
MEASUREMENT
INSTRUMENTATION
Data request and write
Diagnostic and programming
Software
Front keys
Trimmer
Jumper / shunt
PANEL MOUNTING UNITS
60
S-LINE • TOTALIZERS
S114 / S114B
*
Totalizers with divider
and universal input
S144I
*
Totalizer with integrator, analog
input, pulse output
S164
*
7 digit totalizer with 3 ½
digit indicator
GENERAL DATA
115/230 Vac ±50/60 Hz; 24 Vac/dc
Power supply
Power transducers
Max consumption
Data storage
3,5 VA
Rechargeable backup battery, 2 months lifetime without
network supply
115/230 Vac ±50/60 Hz; 24 Vac/dc
20 Vdc, 20 mA
3,5 VA
Rechargeable backup battery, 1 months lifetime without network supply
115/230 Vac ±50/60 Hz; 24 Vac/dc
6, 8 digit 14 mm LED
7 digit (totalizer) + 4 digit (indicator)
14 mm LED
< 0,5% (max conversion error)
3,5 VA
Rechargeable backup battery, 1 months lifetime without network supply
VISUALIZATION AND MEASURE
6 digit (14 mm) red LED
8 digit (9 mm) red LED
Display
Accuracy
Thermal stability
Linearity
±0,005%/°C
±0,1%
INPUT DATA
Nr
Type
1 (isolated)
Sensor reed (contact), npn 2-3 wire (12/24 Vdc sensor
supply), pnp, namur (8 Vdc), 24 Vdc pulse, photoelectric
1
Current: 0-20 / 4-20 mA
Voltage: 0-5 / 1-5 / 0-10 / 2-10 Vdc
1
Current: 0-20 / 4-20 mA
Voltage: 0-5 / 1-5 / 0-10 / 2-10 Vdc
Frequency
Reset
Max 450 Hz, 1 ms (min pulse length)
Isolated (terminal contact, front key option)
Isolated (terminal contact, front key option)
Isolated (terminal contact, front key option)
1
Pulse repetition, transistor npn open collector 30 V, 300
mA; 40 ms (pulse length)
1
Pulse repetition, transistor npn open collector 30 V, 300
mA
-10..+50°C
Shockproof V0 self-extinguished ABS
Removable terminals
96 x 48 x 148 mm (DIN 43700)
92 x 45 mm
380 g
0..+50°C
Shockproof V0 self-extinguished ABS
Removable terminals
96 x 48 x 148 mm (DIN 43700)
92 x 45 mm
420 g
0..+50°C
Shockproof V0 self-extinguished Noryl
Removable terminals
96 x 48 x 148 mm (DIN 43700)
92 x 45 mm
420 g
Divisor circuit, programmable frequency 1..256
Decimal point
Input type
Integration scale
Integration coefficient (1 pulse per 27ʼ, 20 pulse/s)
CE
EN 50081-2, EN 50082-2
Via test or frequency meter
CE
EN 50081-2, EN 50082-2
Input type
Zero, full scale
Integration coefficient (1 pulse per 27ʼ, 20 pulse/s), decimal
point
Via test or frequency meter
CE
EN 50081-2, EN 50082-2
OUTPUT DATA
Nr
Type
THERMOMECHANICS DATA
Operating temperature
Case
Connections
Dimension (w x h x d)
Panel dimension (w x h)
Weight
SETTINGS, NORMS
DIP switch
Trimmer
Jumper / shunt
Calibration
Conformity
Norms
ORDER CODES
Code
Model
S114
S114B
-4 / -6 / -8
Display
Power supply
-1-ST
-23-ST
Code
Model
Display
Power supply
S144I
Code
Model
Power supply
S164
-6 / -8
-1-ST
-23-ST
*Available until stocks last
-1-ST
-23-ST
Description
Totalizer with divider and universal input
Bi-directional totalizers with divider and universal input
4 / 6 / 8 digit
115 / 230 Vac
24 Vac/dc
Description
Totalizer with integrator, analog input, pulse output
6 / 8 digit
115 / 230 Vac
24 Vac/dc
Description
7 digit totalizer with 3 ½ digit indicator
115 / 230 Vac
24 Vac/dc
61
S20N
S21
S30
S6000
Batch controller
Batch controller
with clock
Advanced
batch controller
Control unit
pump controller
115 / 230 Vac ± 50-60 Hz; 24 Vac/dc
12/ 24 Vdc, 30 mA (max)
12 VA
115 / 230 Vac ± 50-60 Hz; 24 Vac/dc
24 Vdc, 30 mA
10 VA
RS232 / RS485 serial interface (option)
Parallel interface for S30 printer (option)
Isolated RS232 (programming, PC connection)
GENERAL DATA
115 / 230 Vac ± 50-60 Hz; 24 Vac/dc
12/ 24 Vdc, 30 mA (max)
10 VA
EEPROM, data
Power supply
Power transducers
Max consumption
Data storage
Clock
115 / 230 Vac ± 50-60 Hz; 24 Vac/dc
12/ 24 Vdc, 30 mA (max)
10 VA
EEPROM, data
Clock with battery and data storage, hour
automatic correction
Interface
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
S-LINE BATCH CONTROLLERS AND CONTROL UNITS
2 numeric display
5 digit LED
Start, stop, reset
2 numeric display
5 digit LED
7 operating status LED
2 numeric display
5 digit LED
7 operating status LED
LCD back lightened display
2 raws x 16 chars
18 LED: motor status, alarms
±0,005% /°C
±0,1%
Nr
Type
1 (isolated)
From sensor: reed, npn (2-3 wire), namur,
hall effect, photoelectric
1 (isolated)
Contact or sensor: reed, npn (2-3 wire),
pnp, 12/24 V pulse, namur, hall effect, photoelectric
1 (isolated)
Contact or sensor: reed, npn (2-3 wire),
pnp, 12/24 V pulse, namur, hall effect, photoelectric
8 (isolated)
Nr 6 digital contacts
Nr 2 analog signals (0..20, 4..20 mA; input
resistance 100 Ω, resolution 200 points)
Frequency
Control
1.000 Hz, min pulse duration 0,1 ms
3 input (start, stop, reset)
3 input (start, stop, reset)
3 input (start, stop, reset)
2
SPDT relay, 5 A 250 V (resistive load)
2
SPDT relay, 5 A 250 V (resistive load)
2
SPDT relay, 5 A 250 V (resistive load)
10
Nr 1 digital contacts open collector
Nr1 SPDT relay 5 A 250 Vac (signalling)
Nr 6 SPST relay, 5 A 250 Vac (actuators)
Nr 2 analog signals (0..20, 4..20 mA; 0..10
V; resolution 4.000 points)
Status indicators
Thermal stability
Linearity
INPUT DATA
CONVERTERS
AND INTERFACES
VISUALIZATION AND MEASURE
Display
Nr
Type
THERMOMECHANICS DATA
Operating temperature
Case
Front protection
Connections
0..50 °C
Noryl self-extinguished V0
Polycarbonate membrane
Back removable terminals
0..50 °C
Noryl self-extinguished V0
Polycarbonate membrane
Back removable terminals
0..50 °C
Noryl self-extinguished V0
Polycarbonate membrane
Back removable terminals
Dimension (w x h x d)
Panel dimension
Weight
144 x 72 x 130 mm
135 x 67 mm
800 g
144 x 72 x 130 mm
135 x 67 mm
800 g
144 x 72 x 130 mm
135 x 67 mm
1,2 kg
0..50 °C
Noryl self-extinguished V0
Polycarbonate membrane
Back removable terminals, serial interface
DB9 connector
144 x 72 x 121 mm
135 x 67 mm
800 g
Programming, metering
CE
Programming, metering
CE
Programming, metering
CE
SOF6000
Programming
CE
PANEL
MOUNTING UNITS
OUTPUT DATA
SETTINGS, NORMS
Software
Front keys
Conformity
S20N
S20NIP65
S20NEX
S20NKIT
S20ADP
S20ADP-CM
S20ADP-IP65
Accessories
Code
Model
S21
S21IP65
S21EX
S20ADP
S20ADP-CM
S20ADP-IP65
Accessories
Code
Model
S30
S30IP65
S30-STAMP
S20ADP
S20ADP-CM
S20ADP-IP65
Accessories
Code
Model
Power supply
S6000
-1-ST / -23-ST
Description
Batch controller
Batch controller in IP65 protected case
Batch controller in EExd flame retardant case
External kit
Input adapter board (hall effect / photoelectric sensor)
IP20 DIN rail input adapter board (hall effect / photoelectric sensor)
IP65 Input adapter board (hall effect / photoelectric sensor)
Description
Batch controller with clock
Batch controller with clock in IP65 protected case
Batch controller with clock in EExd flame retardant case
Input adapter board (hall effect / photoelectric sensor)
IP20 DIN rail input adapter board (hall effect / photoelectric sensor)
IP65 Input adapter board (hall effect / photoelectric sensor)
Description
Advanced batch controller
Advanced batch controller in IP65 protected case
Printer interface
Input adapter board (hall effect / photoelectric sensor)
IP20 DIN rail input adapter board (hall effect / photoelectric sensor)
IP65 Input adapter board (hall effect / photoelectric sensor)
Description
Control unit, pump controller
115 / 230 Vac / 24 Vac/dc
MEASUREMENT
INSTRUMENTATION
ORDER CODES
Code
Model
PANEL MOUNTING UNITS
62
ZTOP – LCD TOUCHSCREEN OPERATOR PANEL
ZTOP03
ZTOP05
Monochrome 3,8” LCD
touch display
Monochrome 5,6” LCD
touch display
ZTOP11
STN colour 5,6”
touch display
DISPLAY
Format
Backlight
Lifetime
Resolution
Active area
Raws x columns
Scalable fonts
User fonts
Contrast setting
Monochrome LCD
LED, white
50.000 hrs
320 x 240 pixel
77 x 58 mm (3,8”)
16 x 40
yes
256
Software
Monochrome LCD
LED, white
100.000 hrs
320 x 240 pixel
121 x 91 mm (5,6”)
16 x 40
yes
256
Software, temperature compensation
STN 16colours
CCFL
25.00 hrs
320 x 240 pixel
77 x 58 mm (5,6”)
16 x 40
Yes
256
Software, temperature compensation
512 kB Flash
32 MB SSFDC memory card
32 MB SSFDC memory card
Resistive
-
Resistive (3 milion operations)
5
Resistive (3 milion operations)
5
RS232, RS422, RS485
Yes, with optional module
9.600 – 38.400 bps
RS232, RS422, RS485, 20 mA CL
Yes, with optional module
9.600 – 38.400 bps
RS232, RS422, RS485, 20 mA C
Yes, with optional module
9.600 – 38.400 bps
Unlimited
32 kB
1.024 + 256
Yes
Yes, 8 levels
3 V, 270 mA, Lithium, non rechargeable
yes
yes
Alarm, communication, battery, hardware fault
18..30 Vdc
400 mA
1 kg
0..50°C
-20..+70 °C
5..85% RH non condensing
IP65
149 x 109 mm (5,86 x 4,49 “); 136 x 96 mm (5,35 x 3,78“)
61 mm (2,4”)
5 mm (0,2”)
Unlimited
32 kB
1.024 + 1.024
Yes
Yes
Yes, backup battery
yes
yes
yes
Alarm, communication, battery, hardware fault
18..30 Vdc
600 mA @ 24 Vdc
1,4 kg
0..45°C
-20..+70 °C
5..85% RH non condensing
IP65
187 x 147 mm (7,36 x 5,79 “); 176 x 136 mm (6,93 x5,35“)
79 mm (3,12”)
5 mm (0,2”)
Unlimited
32 kB
1.024 + 1.024
Yes
Yes, 8 levels
Yes, backup battery
yes
yes
yes
Alarm, communication, battery, hardware fault
18..30 Vdc
600 mA @ 24 Vdc
1,4 kg
0..45°C
-20..+70 °C
5..85% RH non condensing
IP65
187 x 147 mm (7,36 x 5,79 “); 176 x 136 mm (6,93 x 5,35“)
79 mm (3,12”)
5 mm (0,2”)
MEMORY
User memory
FRONT PANEL
Touch screen
System LEDs
CONNECTIONS
PC / printer port
PLC port
Aux (Fieldbus / Ethernet)
Programming speed
GENERAL DATA
Nr variables / page
Recipes memory
Alarms + Events
Alarms info page
Password
Battery
RTC hardware
Screen saver
Buzzer
LED indicators
Power supply
Max consumption
Weight
Operating temperature
Storage temperature
Humidity
Protection degree
Dimension (w x h x d)
Depth
Max thickness
ORDER CODES
Code
Models
Programming
Connections
ZTOP03
ZTOP05
ZTOP11
ZTOPKIT
PM001810
UniOP
PM001820
PM001830
PM001840
PM001850
Description
Monochrome LCD touchscreen graphical panel 3,8”
Monochrome LCD touchscreen graphical panel 5,6”
STN colour touchscreen graphical panel 5,6”
Full programming toolkit: PM001810 + UniOP
Programming / download cable
Design software
Communication cable ZTOP – ZRTU
Communication cable ZTOP – ZTWS
Communication cable ZTOP – RS485 bus
PM001810 adapter for ZTOP05 / ZTOP11
63
SPECIFICHE TECNICHE
Z109REG
CODICI DʼORDINE
• Z109REG (24 Vdc/ac)
• Z109REG-ER (24 Vdc/ac) - estrazione di radice già programmata
ELETTRICHE
Alimentazione
4
CONFIGURAZIONE E NORME
Programmazione software
• Lettura, configurazione, download e salvataggio
DIP Switch
• Tipo, zero e span ingresso
• Tipo uscita
Norme CE
EN50081-2, EN50082-2, EN61010-1
COMUNICAZIONE, ELABORAZIONE, MEMORIA
Campionamento
3 letture al secondo
Memoria dati
EEPROM per i parametri di configurazione, tempo ritenuta 10 anni
Ingresso e uscita (tipo e range)• Termocoppia - J: -200..+1000°C; K: -200..+1300°C;
R: 50..+1750°C; S: -50..+1750°C; T: -200..+ 400°C; E: 150..+800°C; B: 0..+1800°C; N: -200..+1300 °C;
• Termoresistenza - Pt100 -200..+600 °C
• Potenziometro: 0,5..15 Kø
• Tensione (bipolari) 0..200 mV; 0..2, 0..5; 0..10 V
• Corrente (bipolari) 0..20 mA
Impedenza di ingresso
• 2.5 ø in corrente
• 1 Mø in tensione
Risoluzione di ingresso
• Termocoppia: risoluzione 5 ÌV, rilevamento
automatico interruzione TC
• Termoresistenza: misura a 3 fili, corrente di eccitazione 0.56 mA,
risoluzione 0.1 °C, rilevamento automatico interruzione cavi o RTD
• Potenziometro: fondo scala min. 500 ø, risoluzione 0,01 % ds
• Tensione :risoluzione 0.01 %ds
• Corrente: risoluzione 0.01 %ds
Impedenza di uscita
• Impedenza loop in corrente 0..600 ø
• Carico per uscita in tensione > 2.5 Kø
Risoluzione di uscita
• 0.025% per 0..20 mA / 0..10 V / 0..5 V
• 0.032% per 4..20 mA / 2..10 V / 1..5 V
Errori
• Precisione 0.2 %ds. in tensione e corrente, 0.2 % altrimenti
• Linearità: 0.05 % per ingresso in tensione, corrente e potenziometro,
0.2°C per termoresistenza, 1°C per termocoppie salvo 3°C per TCB
oltre 600°C
• Stabilità termica: 0.02%/°C
• Compensazione giunto freddo: 2°C tra 10 e 40°C
DIMENSIONI E INGOMBRI
COLLEGAMENTI ELETTRICI
Assorbimento max
Isolamento
Protezione
Alimentazione trasduttori
Indicatori di stato
Categoria di installazione
Grado di inquinamento
Grado di protezione
• 19..40 Vdc / 19 - 28 Vac, 50-60 Hz
• 9..30 Vdc (opzionale)
2.5 W
Alimentazione // ingresso // uscita: 1.500 Vac
• Ingressi: in corrente 200 mA continuativi, rimanenti 60 V continuativi
• Alimentazione e uscite: contro sovratensioni impulsive 400 W/ms
min 18 Vdc 20 mA
• Power
• Error
II
2
IP20
TERMOMECCANICHE
Temperatura
Funzionam.: 0..+ 50°C
Umidità
30..90 % a +40 °C (non condensante)
Peso
200 g circa
Custodia
Nylon 6 caricato 30 % fibra vetro – classe autoestinguenza V0
Connessioni
Morsetti estraibili polarizzati a vite per conduttori fino a 2.5 mm2
Montaggio
Guida 35 mm DIN 46277
ALIMENTAZIONE
MEASUREMENT
INSTRUMENTATION
La tensione di alimentazione deve essere compresa tra 10 e 40 Vdc), o tra 12 e
28 Vac. I limiti superiori non devono
essere superati, pena gravi danni al
modulo.
INTERFACCIA SERIALE
Il collegamento per lʼinterfaccia seriale e
per lʼalimentazione del modulo è presente anche nel con-nettore sul fondo dello
strumento e ne permette il collegamento
in bus tramite lʼapposito supporto da installare nella guida DIN
USCITE
MEASUREMENT INSTRUMENTATION
64
Handheld Multimeter and Signal Generator with OLED display
Test-3
Voltage (0-10 V)
and current (0-20 mA) input
Battery-charger connector
NiMh 2650 mAh,
life-time 20 hrs
RS232 jack stereo connector
for Z109REG2
(isolated universal converter)
programming
High definition OLED display,
15 contrast levels, 5 languages
graphic menu
Rubber boot
Accuracy: 0.1%
Multi-function encoder button
(settings, generation, measure)
ESC – ON/OFF button
TECHNICAL DATA
ORDER CODE
Code
Model
TEST-3
Options
Accessories
/T
TEST-3-PK
Description
Voltage-current generator / meter and Z109REG2
configurator, rugged, non slip case, chargeable batteries,
standard probes, battery charger, compact bag
Certificated ISO 9001 NIST traceable calibration service
Precision kit. Z109REG2 programming cable
(3,5 mm stereo jack); precision probes set
with adapters and crocodile terminals
CONNECTIONS
-
SIGNAL
GENERATION
+
+
mA
PASSIVE
CURRENT
Range: 0..21 mA,
Loop powered by
Test-3
Range: 0..21 mA,
sink function
External loop
power, max 24 Vdc
SIGNAL
MEASUREMENT
-
-
V
Range: 0..21 mA
sink function
Internal impedance:
20 Ω
CONFIGURATION
+
Z109REG2 PROGRAMMING
VOLTAGE
+
Range: 0..11 V
Load impedance:
1 kΩ
-
mA
PASSIVE
CURRENT
V
mA
ACTIVE
CURRENT
mA
+
-
+
mA
VOLTAGE
Loop 4..21 mA
11 V loop powered by
Test-3
Range: 0..11 V
Internal impedance:
100 kΩ
+
trasduttore
ACTIVE
CURRENT
Loop 4..21 mA
11 V loop powered
by Test-3
Parameters setting and acquisition (input,
alarm, output), settings multiple choice and
numeric values (input type, min, max) on
ModBUS registers. Connection by serial
cable with 3,5 mm stereo mini jack terminal.
65
TEST & MEASUREMENT
DL
PT100
Thermoprobes (RTD)
• Thermoresistance Pt100 3 wires with standard aluminum case
• Process connection 1/2” G.M., Sheat diam.: 6 mm
• Sensor wetted parts: AISI 316, Ohm output
• Atmosphere probe model (ABS, IP65), wall mounting
ORDER CODE
Code
Pt100
Version
-A
-MOLLA/CAVO
-DOPPIA
/EX
/IVG
ADPE
HT
PVC
-T
-S
Length
-L
Output signal
-MA
POZZ
Length
-L
Descrizione
Pt100 thermoresistance, weatherproof head, 1/2”
Air version, IP65 case
Stainless steel version, spring+cable (3 m)
Double Pt100 version
ADPE explosion proof case
1" GAS process connection
ADPE head
High temperature
PVC head
Air connect
On demand
25, 50, 80, 100, 150, 200, 250, 300, 350, 400, 500, 700, 800 mm
4-20 mA output
Stainless steel shaft, 1/2“ G.M. for Pt100
50, 75, 80, 100, 150, 200, 250, 300, 350, 400 mm
CONVERTERS
AND INTERFACES
Descrizione
mA Input Datalogger
mV Input Datalogger
V Input Datalogger
Pulses input
Logger Manager, software standard
Logger Manager software re-educator
PANEL
MOUNTING UNITS
ORDER CODE
Code
Version
DL-mA
DL-mV
DL-V
DL-COUNT
SOFT-OTLM
SOFT-EDUC
MEASUREMENT
INSTRUMENTATION
• Input: mV, Volt, mA, pulses
• Output: RS232 serial connection
• A/D converter resolution: 8 bit
• Sampling time: from 1 minute-second to 10 days
• Alarms: 2 free settable
• Battery life-time from 2 to 5 years
• Dimensions: 80 x 82 x 55 mm
• Configuration software, recording and data download
DISTRIBUTED I/O MODULES AND
REMOTE CONTROL SYSTEMS
Datalogger with IP65 case and multistandard signal input
66
NETWORK ANALYZERS
S203T
S203TA
Advanced Three-Phases Network Analyzer
(input up to 100 mA)
Three-Phase Advanced Network Analyzer
Input up to 5 Arms
• Power supply: 10–40 Vdc, 19–28 Vac 50-60 Hz
• Serial interface: RS485 isolated, ModBUS/RTU
protocol
• Voltage input: capacity measure=600 Vac,
freq. 50 or 60Hz
• Current input: up to 100 mA
• Re-transmitted output by voltage / current
(error max 0,1%)
• Accuracy class: 0,2
• Power supply: 10–40 Vdc, 19–28 Vac 50-60 Hz
• Serial interface: RS485 isolated,ModBUS/RTU
protocol
• Voltage input: max=600 Vac,
freq. 50 or 60Hz
• Current input: up to 5 Arms
• Re-transmission as analogue output voltage /
current (error max 0,1%)
• Accuracy class: 0,2
ORDER CODE
Code
Description
Version
S203T Three-Phase Network Analyzer (class. 0,2), suitable for CT
(accuracy 0.1%) with secondary circuit max 100 mA
Accessories TA15 Current Transformer for S203T, f.s.15 A, accuracy 0,1% (1/1000)
S203T
TA25 Curr. Transformer for S203T, f.s.25 A, accuracy 0,1% (1/1000)
TA100 Curr. Transformer for S203T, f.s.100 A, accuracy 0,1% (1/1000)
ORDER CODE
Code
Description
Version
S203TA Three-Phase Network Analyzer (class 0,2), suitable for common Current
Transformer (Accuracy 0.5%) with output max 5 A
Z203
E2002
Single-Phase Network Analyzer
Universal Network Analyzer
• Power supply: 9..40 Vdc; 8..28 Vac - 50-60 Hz
• Input: voltage 0..500 Vac, current 0..5 A
• Output: current 0..20 / 4..20 mA; voltage 0..5 /
0..10 / 1..5 / 2..10 V
• Accuracy: 0.5%
• Isolation: 3.750 Vac (from/to power); 1.500 Vac
(other circuits)
• Dimension (w x h x d): 17,5 x 100 x 112 mm
• Simultaneously data acquisition of RMS
parameters voltage, current, cosФ, power,
energy, harmonic distortion...
• Class 0,5
• 2 pulse outputs for energy and alarms
• RS485 serial interface, 3 communication
protocols
• Dimensions: 6 DIN modules
ORDER CODE
Code
Z203
ORDER CODE
Code
Description
E2002-2-M
Universal Network Analyzer, 115 / 230 Vac
E2002-4-M
Universal Network Analyzer, 72x144 mm, 24 Vac
E2002-3-M
Universal Network Analyzer, 72x144 mm, 12/24/48/110 Vdc
-FL
Panel Mounting Tool
Description
Single Phase Network Analyzer, power 10..40 Vdc/ 19..28 Vac
E92002
E742002
Universal Network Analyzer (panel mounting)
Universal Network Analyzer (Panel Mounting)
• Simultaneously RMS data acquisition of voltages, currents, CosФ, power, energy, harmonic
distortion…
• Class 0,5
• 2 pulse outputs / relays for energy and alarms
• RS485 serial interface, 3 communication protocols
• Panel mounting (96 x 96 mm)
• Simultaneously data acquisition of RMS
parameters voltage, current, cosФ, power,
Energy, harmonic distortion...
• Class 0,5
• 2 pulse outputs for energy and alarms
• RS485 serial interface, 3 communication
protocols
• Panel mounting (72 x 144 mm)
ORDER CODE
Code
Description
E92002-2
Panel Mounting Network Analyzer, 96x96 mm, 115 / 230 Vac
E92002-4
Panel Mounting Network Analyzer, 96x96 mm, 24 Vac
E92002-3
Panel Mounting Network Analyzer, 96x96 mm, 12/24/48/110 Vdc
ORDER CODE
Code
Description
E742002-2
Panel Mounting Network Analyzer, 72x144 mm, 115 / 230 Vac
E742002-4
Panel Mounting Network Analyzer, 72x144 mm, 24 Vac
E742002-3
Panel Mounting Network Analyzer, 72x144 mm, 12/24/48/110 Vdc
QUALITY SYSTEM AND INTERNATIONAL STANDARDS
SENECA operates according to quality standard, compliant to ISO
mated lines, is compliant to RAEE and ROHS lead free internatio-
9001 since 1997 in “design and manufacturing of system and electronic instrumentation for control, data transmission and interface
nal standards.
The safety standards, electromagnetic compatibility and protection
for automation”.
Electric are compliant to CE, IEC, EN approvals.
Our products are approved CE, UL and UR for the North American
Software and communication tools for our instruments are develo-
market and they offer RINA certification for applications in shipbuilding.
ped and updated according to international recognized standards
(eg, IEC 61131, Modbus RTU / TCP, IEC 870, CANopen, PPP,
Our manufacturing process, undertaken by SMT technology auto-
SMTP, HTML, OPC Server).
SENECA ON THE WEB
SENECA offers an interactive website and a
large database useful for every customer need:
technical and sales info, catalogues, data sheets,
operating manuals, software, online technical
support, sales network, news, internal site
search, quick product selector. Everything userfriendly, downloadable and continuously updated.
www.seneca. it
www.seneca.it/impianti
www.seneca-forniture.it
CONTACTS
Tel.: +39 049 8705.359 (.408)
Fax: +39 049 8706287
E-mail: [email protected]
E-mail:
Sales Department: [email protected]
Administration and Logistics Dept: [email protected]
Quality Control: [email protected]
Technical assistance: [email protected]
Products support: [email protected]
Headquarter:
Via Germania, 34 - 35127 Padova
Operations Unit:
Via Svizzera 17, 35127 Padova
Via Germania 34 - 35127 Padova - (I) • Tel. +39 049 8705 359 (.408) • Fax +39 049 8706287 • www.seneca.it • [email protected]
This document is property of SENECA srl. Duplication and reproduction are forbidden, if not authorized. Content of the present documentation refers to products and technologies described in it. All technical
data contained in the document may be modified without prior notice. Content of this documentation is subject to periodical revision. For any further information and explanations, please do not hesitate to contact us or send an e-mail to [email protected]
Publication C00907EN – July 2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement