Anniversary Edition - 2014
20
Designed to perform
control when you need it
Another Quality Brand
by
Anniversary Edition - 2014
Desk/Wall &
Pedestal Fans
Another quality brand
Contents
CED has long been established as one of the UK’s leading suppliers
to the electrical wholesale industry as well as supporting unrivalled
levels of stock and service.
Our first product ever sold was a fan and a small selection of fans
formed the basis of our founding range of products. It has been over
20- years since then and our product selection has increased to over
5000 lines however cooling, heating, ventilation and hygiene have
always remained a vital part of CED’s core offering.
Now under the Airmaster brand we are pleased to announce our first
dedicated catalogue for this range, as we aim to continue to provide
the best in informational and marketing materials to support the latest fans, heaters, extractor fans and hand dryers.
General Features...
BS EN60335-2
220-240V/50Hz
nGS approval (selling successfully over 20 years)
nOscillating mechanism in the centre of the motor
nOscillating movement has whisper quiet operation to circulate air evenly
& efficiently
nAerodynamic blade for more powerful air delivery
nDurable safety approved grill & non-scratch rubber feet
nOscillating head with slipping clutch mechanism for safety
nModern stylish design and colour coordinated to suit most decors
nWhite colour body
nPlastic blade
n1.7 Meter cable length
nFitted with 3 Amp fused BSI
approved 3 pin plug
nEasy to assemble with locking screws
nUser friendly instructions
n
n
Desk, Pedestal, Wall, Clip-On Desk & Pedestal Fans
“CE, TUV, GS” Approved to BSEN60335-2
We’d like to thank all our customers for their continued support over
the years and to re-iterate our commitment to you. With the opening
of a new storage depot as of summer 2015 we are also expanding our
storage capacity by 6500 pallet spaces (in addition to the 5500 at our
current premises) to ensure better stock holding than ever. And as
always we still strive to maintain the principles of ‘quality products at
affordable prices’.
Cooling
Desk/Wall & Pedestal Fans
Air Conditioners & Fan Heaters
1/3
4
Heating
Convector Heaters & Halogen Heaters 5
Radiators (Oil Filled)
6
Panel Heaters, Frost Watch Heaters
& Warm Air Curtains
7
Patio Heaters & Tubular Heaters
8
Boiling Rings, Bathroom Heaters &
Bathroom Lights
9
Bathroom Heaters Infra-red
& Towel Rails 10
Ventilation
Extractor Fans
11/15
Hygiene
Fly Killers
Hand Dryers
Imersion Heaters & Timers
15
16/19
20/21
All our Desk, Pedestal & Wall fans have been
redesigned to ensure they meet the latest
EU directive on safety grills
Clip-On Fan
2 Speed
SCF6 - 6” Clip-On Fan
2 Speed
23W - 220-240V/50Hz
Line plastic grille with copper motor
l 4 colour box 1pc + outer carton 6pcs
lCable: 2 core 0.75mm
l Air velocity: 7.5 Cubic Mtr/min
l Noise level: 45(dB)
l Current: 160(mA)
l Rotation speed:
2250rpm (min) - 2000rpm (max)
l Dimension: 201 x 195 x 302mm
l Class II
l
l
SCF6
NEW DESIGN
Suitable for home, shops,
restaurants, pubs, clubs, stores
etc.
Information: All information shown in this catalogue is correct at
time of going to press, however we reserve the right to alter or
amend the data without prior notice. If you are in doubt please ask
our sales team for assistance before ordering.
Code
Description
SCF6
6” Clip-On Fan 2 Speed
Wattage
Dimensions (mm)
23
201 x 195 x 302
“All specification is subject to changes without prior notice”.
Whilst every effort is made to ensure the product specification and appearance, there may be
unavoidable differences due to changes required by legislative bodies or design aesthetics.
Desk Fans
2 Speed & 3 Speed
STF12D - 12” Desk Fan 3 Speed
40W - 220-240V/50HHz
Oscillation and tilt function
l Mesh grille with copper motor
l Cable: 2 Core 0.75mm
l 4 Colour box 1pc + master carton 4pcs
l Air velocity: 31.59Cubic Mtr/min
l Noise level: 52.91(dB)
l Current: 152(mA)
l Rotation speed: 975rpm (Min) - 1156rpm (med) - 1311rpm (max)
l Dimensions: 345 x 251 x 473mm
l Class II
l
l
STF12D
NEW DESIGN
Suitable use:- bars, restaurants, cafes, shops, garages, workshops,
smoking zone, retail stores, spas, schools, churches and domestic
use
Code
Description
STF12D
12” Desk Fan 3 Speed
Wattage
Dimensions (mm)
40
345 x 251 x 473
STF9D - 9” Desk Fan 2 Speed
Rotation speed: 1750rpm (min) - 2108rpm (max)
Mesh grill with copper motor
l 4 Colour box 1 pc + outer carton 6 pcs
l 30W - 220-240V/50Hz
l Cable: 2 Core 0.75mm
l Air velocity: 15 cubic Mtr/min
l Noise level: 52.26(dB)
l Current: 149(mA)
l Dimensions: 284 x 210 x 360mm
l Class II
l
l
STF16D - 16” Desk Fan 3 Speed
Rotation speed:
906rpm (min) - 1120rpm (med) - 1228rpm (max)
l Oscillation and tilt function
l Mesh grille with copper motor
l 4 Colour box 1pc+ outer carton 4pcs
l 45W - 220-240V/50Hz
l Cable: 2 Core 0.75mm
l Air velocity: 41.17 Cubic mtr/min
l Noise level: 53.38(dB)
l Current: 161(mA)
STF9D
l Dimension: 445 x 294 x 540mm
NEW DESIGN
l Class II
l
1
Suitable for home, shops,
restaurants, pubs, clubs, stores
etc.
STF16D
NEW DESIGN
Code
Description
STF9D
9” Desk Fan 2 Speed
Wattage
Dimensions (mm)
Code
Description
30
284 x 210 x 360
STF16D
16” Desk Fan 3 Speed
Wattage
Dimensions (mm)
45
445 x 294 x 540
...control when you need it
Tower Fan
STF2 - Tower Fan with Timer
3 Speed
45W-50W - 220-240V/50Hz
Timer up to 2 hours in 10min intervals
l Oscillation 85° degrees
l Cable: 2 Core 0.75mm
l 4 Colour box 1pc + master carton 2pcs
l Air velocity cfm: 11 cubic Mtr/min
l Noise level: 54.9(dB)
l Current: 200(mA)
l Rotation speed: 1150rpm (min) - 1250rpm
(med) - 1380rpm (max)
l Dimension:- 240 x 240 x 762mm
l Class II
l
l
Timer Settings
2
STF2
Speed Settings
SSF16D
NEW DESIGN
Pedestal Fan
45W - 220-240V/50Hz
Mesh grille with copper motor
l Longer length cross shaped base for safety
l Cable: 2 Core 0.75mm
l 4 Colour box 1pc + outer carton 2pcs
l Air velocity: 36.13 Cubic Mtr/min
l Noise level: 54.91(dB)
l Current: 160(mA)
l Rotation speed:
900rpm (min) - 1100rpm (med) - 1250rpm (max)
l Height range: 103-122cm
l Dimension:- 670 x 670 x 1220mm
l Class II
l
l
SSF16D
16” Pedestal Fan 3 Speed
Wattage
Dimensions (mm)
45
670 x 670 x 1220
Wattage
Dimensions (mm)
45-50
240 x 240 x 762
SAF12CHR -12” Antique Desk Fan
Chrome - 3 Speed
35W - 220-240V/50Hz
Solid construction for high performance and durability
l Classical and elegant with 33.5cm spiral Chromed grill and 4 section
Aluminium blades
l Built-in thermal fuse protection for the motor
l Pure copper wire motor
l Cable: Black 3x0.75mm2, H05W-F VDE 1.8Mtr
l Dimensions: 335 x 265 x 410mm
l CE, GS, CB, RoHS REACH approval
l Class I
l
l
SSAF16CHR -16” Antique Pedestal Fan
Chrome - 3 Speed
50W - 220-240V/50Hz
Solid construction for high performance and durability
l Classical and elegant with 33.5cm spiral Chromed grill and 4 section
Aluminium blade and oscillation function
l Rotation speed: 950rpm (min) 1100rpm (med) 1250rpm (max)
l Built in thermal fuse protection for the motor
l Pure copper wire motor
l Cable: Black 3x0.75mm2, H05W-F VDE 1.8Mtr
l Height 1.25M Range: 103-125cm
l Dimension:- 445 x 395 x 1250mm
l CE, GS, CB, RoHS
l Class I
l
Description
3 Speed Tower Fan with Timer
Chrome - 3 Speed
l
Code
Description
STF2
Antique Desk & Pedestal Fans
3 Speed
SSF16D - 16” Pedestal Fan 3 Speed
Code
Wall Mounted Fan
SWF16 -16” Wall Mounted Fan
Pull-Cord 3 Speed
50W - 220-240V/50Hz
Oscillation 60° degrees
l 3 Core cable 0.75mm
l 4 Colour box 1pc + outer carton 2pcs
l Fits on the wall with metal brackets (supplied)
l Air velocity: 31.59 cubic Mtrs/min
l Noise level: 54.9(dB)
l Current: 200(mA)
l Rotation speed:
1150rpm (min) - 1250rpm (med) - 1380rpm (max)
l Dimensions:- 450 x 356 x 560mm - Height 20” (approx)
l Class I
l
l
SWF16
NEW DESIGN
Suitable to use:-bars, restaurants, cafes, shops,
garages, workshops, smoking zone, retail stores,
swimming pool, spa , schools, churches and
domestic environments
Code
Description
SWF16
16” Wall Mounted Pull-Cord Fan 3 Speed
Wattage
Dimensions (mm)
50
400x180x190
High Velocity Fan
Floor Standing - 3 Speed
HVF18 -18” High Velocity Fan
Floor standing - 3 Speed
140W - 220-240V/50Hz
incorporates a 51cm spiral Chromed grill
with (3 section) Aluminium blades and tilt
adjustment function for flexible use
l High velocity motor for maximum air
circulation with precisely balanced blades to
achieve lower operating noise
l Rotation speed:
950rpm (min) 1100rpm (med) 1250rpm (max)
l Built-in thermal fuse protection for motor
l Pure copper wire motor
l Cable: Black 3x0.75mm2, H05W-F VDE 1.8Mtr
l Finish: Chrome
l Dimensions: 55 x 20 x 54.5cm
l CE, GS, CB, RoHS
l Class I
l
l
SAF12CHR
SSAF16CHR
THERMO-FUSE
Code
Description
12” Antique Desk Fan
SSAF16CHR 16” Antique Pedestal Fan
3
Suitable for factories,
warehouses and large
expansive spaces
Protected
SAF12CHR
HVF18
Wattage
Dimensions (mm)
35
335 x 265 x 410
50
449 x 395 x 1250
Code
Description
HVF18
3kW Screen Door Heater
Wattage
Dimensions (mm)
140
550 x 200 545
...control when you need it
Air Conditioner
Plus - Dehumidifier
NEW
Features...
ACP12RC - Portable Air Conditioner
with Remote Control
2 in 1 Air Conditioner & De-Humidifier
Exhaust pipe can be stored inside the unit for easy storage and
carrying
l Internal anti-bacteria water tank/tray to avoid build-up of germs and
mould
l No need for drainage unless in extreme wet weather
l Complete with remote control
l 3.4kW/11500BTU
l Power supply: 220-240V/50Hz
l Power consumption: 1.31kW/6.0A
l Air volume: 360cbm/h
l Humidity removal capacity: 1.5L/H
l Working temperature: 18~32°C thermostat range
l Exhaust pipe: 1400mm
l Refrigerant: R-410a
l Dimensions: (H)744 x (W)480 x (D)313
lCE, RoHS approval - ErP approved
lEER Rating: A
lClass I
l
l
4
ACP12RC
NEW DESIGN
Easy to move
Easy to store
l 1-24 hour timer
l 3 speed fan
l Sleep function
l Remote control
l Continuous drainage available
l ErP Approved
l
l
Fan Heaters
Code
Description
APC12RC
3.4kW Portable Air Conditioner
Wattage
Dimensions (mm)
45
744 x 480 x 313
Features...
BS EN60335-1:2012
220-240V/50Hz
n2 Heat Settings: 1000W/2000W
nNormal/warm/hot selection
nNeon Power indicator light
nAdjustable thermostat
nThermal automatic cut-out
Heat Settings
Overheating protection
Flame retardant material
n1.7Mtr 2 core cable fitted with
BS1362 approved plug
n1 year guarantee
nCE, GS, RoHS
n
n
n
n
UFH2T - 2kW Upright Fan Heater &
Thermostat
G.W.: 1.2kg/ N.W.: 1kg
Dimensions 215 x 130 x 250mm
l Spray Painted Aluminium Blade
l Carrying handle
l Colour: White
l Frost watch protection
l
Thermostat
l
FH2T
THERMO-GUARD
Protected
FH2T - 2kW Floor Fan Heater & Thermostat
UFH2T
G.W.: 1.2kg/ N.W.: 1kg
Dimensions 250 x 215 x 130mm
l Colour: White
l Frost watch protection
l
l
Code
Description
Wattage
Dimensions (mm)
UFH2T 2kW Upright Fan Heater & Thermostat
2000
215 x 130 x 250
FH2T
2000
250 x 215 x 130
2kW Floor Type Fan Heater & Thermostat
Convector Heaters
Wall & Floor
Features...
CE, GS, RoHS, BSEN 60335-1:2012
2000W - 220-240V/50Hz
nWhite body with Black handle and feet
nAutomatic selection of 3 heat settings: 750W / 1250W / 2000W
nAdjustable room thermostat
nEasy to set timer On/Off function
nOver-heating protection with 2 safety fuse cutouts built into heating
elements
nFree standing or wall-mounting
nPlug cord length: 1.8Mtr with 3 Core cable 1.0mm with BS1363
approved plug
n3 Versions: Standard / Turbo (with fan heater) / Timer (with 24hr
segment timer)
nG.W.: 2.4kgm N.W.: 2.9kgm
nDimensions: (Floor) 590 x 430 x210
nDimensions: (Wall) 590 x 372 x108
n1 Year Guarantee
nClass I
THERMO-GUARD
n
n
HC2TIM
HC2TF
Heat Settings
Thermostat
Protected
Thermostat
Timer Control
WARNING!
To avoid overheating and risk of fire do not cover outlet grills, these panels are not
suitable for drying wet material or clothing.
Halogen Heater
Code
Description
Wattage
Dimensions (mm)
HC2D
2kW Convector Heater with Thermostat
2000
590 x 430 x 210
HC2TF
2kW Convector Heater with Turbo Fan
2000
590 x 430 x 210
HC2TIM
2kW Convector Heater with 24hr
Segment Timer (15min. Interval Setting)
2000
590 x 430 x 210
with Tip-Over safety cut-out
HH1200 - 1200W Halogen Heater
BS EN 60335-1 : 2012
1200W - 220-240V/50Hz
l3 heat settings 400W / 800W / 1200W
lOscillating action with tip over safety cut-out switch
lColour: Grey/Black
lDimensions 355 x 170 x 575mm
lG.W.: 1.1kg / N.W.: 0.9 kg
l
l
5
HH1200
WARNING!
To avoid overheating and risk of fire do not cover outlet grills
Code
Description
HH1200
1200W Halogen Heater
Wattage
Dimensions (mm)
1200
355 x 170 x 575
...control when you need it
Oil Filled
Radiators
Features...
BSEN 60335-1:2012 EN50366; 2003+A1
220-240V/50Hz
nVariable Thermostat Control
nThermal trip over cutout switch
n6 Oil channels per fin
n2 heat settings
nWheels for easy movement
nConvenient cord storage
nCarrying handle
nOff White with dark grey control panel
nFour colour carton packing
nManufactured from cold rolled steel plates
n1.7Mtr 3 core cable fitted with BS1362 approved plug
n1 Year Guarantee
nCE, GS, RoHS
n
n
CR15 - 1.5kW Oil Filled Radiator
G.W.: 15.5kg/ N.W.:14.3 kg
Dimensions 455 x 175 x 660
l 7 fins - 15cm width
l 3 heat settings 600W / 900W / 1500W
l
6
l
Thermostat
CR2 - 2kW Oil Filled Radiator
G.W.: 18.1kg/ N.W.:16.9 kg
Dimensions 540 x 175 x 660
l 9 fins - 15cm width
l 3 heat settings 800W / 1200W / 2000W
l
l
Heat Settings
CR2T - 2kW Oil Filled Radiator with Timer
G.W.: 18.1kg/ N.W.:16.9 kg
Dimensions 540 x 175 x 660
l 9 fins - 15cm width
l 24hrs timer with 15 mins segments
l 3 heat settings 800W / 1200W / 2000W
l
l
CR2
CR2.5 - 2.5kW Oil Filled Radiator
Timer Control
CR2T
Thermostat
G.W.: 21kg/ N.W.:19 kg
Dimensions 630 x 170 x 660
l 11 fins - 15cm width
l 3 heat settings 1000W / 1500W / 2500W
l
l
CRMINI - 500W Oil Filled Radiator
G.W.: 5.3kg/ N.W.:4.5 kg
Dimensions 380 x 135 x 430
l 5 fins
l
l
THERMO-GUARD
Protected
Power Control
CRMINI
Code
Description
Wattage
Fins
Dimensions (mm)
CR15
1.5kW Oil Filled Radiator
1500
7
455x175x660
CR2
2kW Oil Filled Radiator
2000
9
540x175x660
CR2T
2kW Oil Filled Radiator with Timer
2000
9
540x175x660
CR2.5
2.5kW Oil Filled Radiator
2500
11
630x170x660
CRMINI
500W Oil Filled Radiator
500
5
380x135x430
Slimline Panel
Heaters
Features...
CE, GS, & RoHS approved
Slim, compact and light design
n Silent operation with instant and even flow of heat
n Highly efficient sheathed heating element with Aluminium diffuser
n Powder coated body (corrosion resistant)
n Easy to install complete with the wall mounting kit
n Free standing with easy castor installation (optional)
n Overheat thermal safety protection cutout
n Adjustable room thermostat to set and maintain desired temperature
automatically
n Mechanical thermostat - moulded at rear on side
n Suitable of hotels, restaurants and commercial properties
n 1 year guarantee
n
n
PH1
Timer Section
ALL NEW
Slim Panel Heater
(Free Standing/Wall Mountable)
WARNING!
To avoid overheating and risk of fire do not cover
outlet grills, these panels are not suitable for
drying wet material or clothing.
Voltage: 220-240V~50/60Hz l Rating: IP24 (can be used
in the bathroom) l Unit Thickness: 55mm l Distance from
Wall: 78mm l Colour: White l Box quantity: 1pcs
l
Code
Description
Wattage
Distance from wall (mm)
Dimensions (mm)
PH1
1000W Panel Heater
1000
78
640 x 400 x 55
PH15
1500kW Panel Heater
1500
78
930 x 400 x 55
PH2
2000W Panel Heater
2000
78
1265 x 400 x 55
PHCASTORS
Set of optional castors for Panel Heater
-
-
-
N.B. All panels are supplies without castors. If you
require the panel heater to be floor standing, please
order the castors pack ‘PHCASTORS’ when ordering.
Frost Watch Heater Warm Air Curtain
Door Screen Heater
Thermostat
Features...
BSEN 60335-1:2012, CE approval
n Adjustable room thermostat 5-30°
with (Frost Watch - Auto On)
n Wall mounting
n White sheet metal body
n Neon indicator
n Reduces heat lose
Features...
BS EN60335-2-30:2009, CE approval
Warm air curtain with aesthetic slimeline
body, ideal for mounting over doors
n Ceiling or wall mounting with bracket
n Switched controls for fan only
n Finish:- Epoxy White painted
n Body:- Sheet Steel & powder coating
n
n
n
FW400
WAC3
FW400 - 400W Frost Watch Heater
WAC3 - 3KW Screen Door Heater
l
l
400W
l 220-240V/50Hz
l Dimensions:- 260 x 245 x 150mm
l G.W.: 1.1kg / N.W.: 0.9kg
Suitable for shops, offices
and restaurants
Code
Description
FW400
400W Frost Watch Heater
1.5kW & 3kW (2 heat settings)
Wattage: 240V~50Hz (3kW)
l Air velocity: 4m/s (Noise: 42dB)
l Air volume 254 cubic meter/hr
l Cable: 3 Core 1.5Mtr
l Dimensions: 580 x 205 x 104.5mm
l Weight: 5.2kg
l Box quantity: 1pc / carton
l
Wattage
Dimensions (mm)
Code
Description
400
580x205x104.5
WAC3
3kW Door Screen Heater
7
Suitable for shops,
restaurants, pubs, clubs,
stores, over door screen
heater
Wattage
Dimensions (mm)
3000
580x205x104.5
...control when you need it
Patio Heaters
Wall & Pedestal
Features...
BS EN60335-1:2012
220-240V/50Hz
n 3 Heating Settings: 650W / 1350W / 2000W
n Pull cord power switch with indicator
n Quartz tube heating with (over heat protection)
n3Mtr 3 core 1mm cable fitted with BS1362
approved plug with 13A fuse
n Adjustable angle & height
n Tilt angle cut-off for safety - use angle at 0-45º
n IPX4 - Limited outdoor use (under cover)
n CE, GS
n
n
PH2000WL
PH2000PED
FLH1300G - 1300W Infrared
Quartz Halogen Lamp (Gold)
c/w Lamp
PH2000PED - 2000W Patio Pedestal Heater
G.W.: 10.5kg / N.W.: 9.0kg
Dimensions 380 x135x 430
l Max Height 1.7 -2.1 Meters (pedestal)
l Base diameter 50cm
l
240VAC/50Hz
l Rating: IP54 - Class 1
l Dimensions: 400 x 180 x 190mm
l Weight: 3.7kg
l Diecast aluminium construction & reflector
l Toughened safety glass
l Colour - black
l Replace lamp: IPH1300G (gold)
l CE, GS, SAA
l
l
8
FLH1300G
PH2000WL - 2000W Patio Wall Heater
l
l
G.W.: 2.0kg / N.W.: 2.5 kg
Dimensions 380 x135 x 430
Suitable to use in bars, restaurants, cafes, shops, garages, workshops,
smoking zone, retail stores, swimming pool, spa’s, schools, churches and
many more.
Code
Description
FLH1300G
1.3kW Infrared Quartz Halogen Heater
*UV lamps protected infra-red halogen gold lamp
Tubular Heaters
Wattage
Dimensions (mm)
1300
400x180x190
PH2000PED 2kW Patio Pedestal Heater
2000
380x135x430
PH2000WL
2000
380x135x430
2kW Patio Wall Heater
Features...
BSEN 60335-1:2012
220-240V/50Hz
nHeating element with fibreglass cover
nWhite enamel finish
nWall mounting
nSteel tube
n1.5Mtr VDE approved cable
n
n
TH2G
TH3
TH5
TH6
Code
Description
Wattage
Dimensions (mm)
Guard Codes
TH1
1’ Tubular Heater
45W
300 x 80 x 90
TH1G
TH2
2’ Tubular Heater
90W
600 x 80 x 90
TH2G
TH3
3’ Tubular Heater
135W
900 x 80 x 90
TH3G
TH4
4’ Tubular Heater
180W
1200 x 80 x 90
TH4G
TH5
5’ Tubular Heater
225W
1500 x 80 x 90
TH5G
TH6
6’ Tubular Heater
270W
1800 x 80 x 90
TH6G
Boiler Rings
Counter Top Cookers
Features...
CE, GS approved
Voltage: 220-240VAC/50Hz
n3Mtr 3 core cable fitted with BS1362 approved plug with 13A fuse
nCorrosion resistant non-stick cast iron body with cast iron non-stick
coated plates
nOperating on/off indicator light with variable heat control and autothermostat control - overheat protection
nNon-stick rubber feet
nColour: White
n
n
BR1 - 1500W Boiler Ring with Thermostat
Output: 1.5kW (1500W - ring)
Dimensions: 280 x 250 x 70mmm
l G.W.: 350g / N.W.: 200g
l
BR2
NEW DESIGN
l
BR2 - 2500W Boiler Ring with Thermostat
Output: 2.5kW (1500W - large ring) & (750W - small ring)
Dimensions: 450 x 250 x 70mm
l G.W.: 700g / N.W.: 400g
l
Wall Mounted
l
BR1
NEW DESIGN
Optional Guard
Suitable for kitchens, restaurants, offices and domestic use
Bathroom Heaters
Features...
BFH24P
2.4kW Down flow Bathroom Fan Heater
BR1
1.5kW Boiling Ring with Thermostat
255 x 255
Ø185
BR2
2.5kW Boiling Ring with Thermostat
460 x 255
Ø185 & Ø145
Heat & Light Unit
Combined
750W radiant heater which provides fast local heat
Stainless Steel reflector for efficient heating
n Suitable for use on domestic lighting circuit
n Can be used as light only, heat only or combined heat & light by using the
4 way pull-cord
n Provides quick, efficient heat for bathrooms, kitchens, toilets and workshops
etc.
BFH750
BHL750 - 750W Combined
Heat & Light Fitting
CE BS EN60335-2
220-240V/50Hz
l Heat: 750W
l Light: 60W (E27)
l Dimensions: Ø33 x 15.5cm
l Switch: O/H/L/H+L
l Mounting: Ceiling only
l Box quantity: 1pc
l
l
l
BFH24P
Hotplate (mm)
n
l
Description
Dimensions (mm)
n
BFH24P - 2.4KW Pull-Cord Down
flow Bathroom Fan Heater
Code
Description
Features...
Compact streamline low profile design
n Neon indicator to show ‘On’ position
n Wall mounting bracket that fits onto the heater
n Built in step down thermostat automatically
reduces to 1.2kW for economy and comfort
n On/Off pull-cord switch for various heat settings
n Fused & thermostat for overheat protection
n Element: Coiled heating element
n
CE BS EN60335-2 approved
2.4kW - 220-240V/50Hz
l Construction: Fire retardant (flame)
l Type of grill: Metal
l Colour: White
l Cable: 1.5Mtrs 2 Core
l Dimensions c/w Bracket: 240 x 230 x 170mm
l Box quantity: 6pcs
l Class II
Code
THERMO-GUARD
Protected
9
Wattage
Dimensions (mm)
Code
Description
Wattage
Dimensions (mm)
2400
240 x 230 x 170
BHL750
750W Combined Heat & Light 60W (ES)
750/60
Ø330 x 155
...control when you need it
Bathroom Heaters
Quartz Infra-Red
IRH1200 / IRH1500
Quartz Infra-red Bathroom Heater
(Exclusive double switch system)
New modern streamline design - BS EN60335-2 approved
Adjustment: Body can be adjusted for directional heating to point
where required
l Pull-cord switch
l Wall Mounting
l Indicator light showing power is on or off
l Colour: Chrome steel body - Grey switch housing with pull cord switch
l Output: 1200W (2 Bar) or 1500W (3 Bar)
l Voltage: 240V/50Hz
l
l
IRH1200
NEW DESIGN
IMPORTANT!
Unit must be fitted at a minimum height of 180cm but not within 40cm of
ceiling
l Must not be located within 60cm of bath or 20cm of bathroom cabinets
l Should be located at least 100cm above bathroom counter tops
l Should be fitted by a qualified electrician only
l Please ensure that you read the instructions fully before commencing fitting
l
10
WARNING!
To avoid overheating and risk of fire do
not cover outlet grills
Heated Towel Rails
Code
Description
Wattage
Dimensions (mm)
IRH1200
IRH1500
1200W Quartz Infra-red Bathroom Heater
1200
135 x 160 x 560
1500W Quartz Infra-red Bathroom Heater
1500
135 x 160 x 560
Features...
CE, BS EN60335-2 approved
3 Core fitted with BS approved 13Amp plug (3A fuse)
nSilicone heating element:
n
n
TRW80CHR
TRW80CHR - 65W Towel
Rail - Chrome
(Free Standing/Wall
Mountable)
65W - 240V/50Hz
Construction Material: Steel (Chrome
Plated) Colour: Chrome
l Complete with 2 metal legs and 4pcs
plastic brackets
l Dimensions: 550 x 800 x 26mm
l Weight: 13.2kgm
l Box quantity: 4pcs
l
l
Code
Description
Wattage
Dimensions (mm)
TRW80WHI
80W Towel Rail (Floor/Wall) - White
80
550 x 800 x 26
TRW80CHR
65W Towel Rail (Floor/Wall) - Chrome
65
550 x 800 x 26
TRS60WHI
60W Towel Rail (Wall) - White
60
527 x 570 x 26
TRS60CHR
50W Towel Rail (Wall) - Chrome
50
527 x 570 x 26
TRW80WHI - 80W Towel Rail - White
(Free Standing/Wall Mountable)
80W - 240V/50Hz
Construction Material: Steel (Powder Coated) Colour: White
l Complete with 2 metal legs and 4pcs plastic brackets - Black
l Dimension: 550 x 800 x 26mm
l Weight: 13.2kgm
l Box quantity: 4pcs
l
l
TRS60WHI - 60W Towel Rail - White
(Wall Mounted)
60W - 240V/50Hz
Construction Material: Steel (Powder Coated) Colour: White
l Complete with wall mounting brackets
l Dimensions: 527 x 570 x 26mm
l Weight: 2.0kgm
l Box quantity: 4pcs
l
l
TRS60CHR - 50W Towel Rail - Chrome
(Wall Mounted)
50W - 240V/50Hz
Construction Material: Steel (Chrome Plated) Colour: Chrome
l Complete with wall mounting brackets
l Dimensions: 527 x 570 x 26mm
l Weight: 2.0kgm
l Box quantity:- 4pcs
l
l
Extractor Fans
4” & 6” XF Series
Features...
BS EN60335-1: 2012
220-240V/50Hz
nIPX4
nClass II (double insulated)
nCE, GS approved
n
n
4” & 6” extractor fans are sold in three versions:l Standard basic model:
Fan works with a light switch or external switch
l Pull cord model:
Fan is switched off with a double pole pull cord switch fitted in
the extractor fan
l Timer model:
Fans starts working with a light switch unit and stops operating
after a preset number of minutes of the light being switched off
XF6P
XF6S
XF4S/XF4P/XF4T
4” Extractor Fans - Wall
Class II (double insulated)
Air movement: 80 cubic Mtrs/hr
l Rated: 48.6(dB)
l Power consumption: 20W (max)
l Complete with comprehensive installation instructions
l Suitable for the ventilation of toilets and bathrooms in
accordance with IEE & Building regulations
l
l
XF6S/XF6P/XF6T
6” Extractor Fans - Wall
Double insulated
Air movement: 230 cubic Mtrs/hr
l Rated: 44.8(dB)
l Power consumption: 25W (max)
l Complete with comprehensive installation instructions
l
l
XF4S
XF4P
XF4H
Code
Description
Timer
Dimensions (mm)
Box/Qty
XF4S
4” Fan Standard
Continuous
164 x 154 x 88
6
XF4P
4” Fan Pull Cord
Continuous
164 x 154 x 88
6
XF4T
4” Fan with Timer
2-30 mins
164 x 154 x 88
6
XF6S
6” Fan Standard
Continuous
230 x 200 x 115
1
XF6P
6” Fan Pull Cord
Continuous
230 x 200 x 115
1
XF6T
6” Fan with Timer
2-30 Mins
230 x 200 x 115
1
11
...control when you need it
Window Fans
6” XF Series
XF6WINP/XF6WINPT
6” Window Fans (Pull-Cord)
BS EN60335-1: 2012
Complete with comprehensive installation instructions
l Available in two versions: Standard, Basic and with Timer
l Air movement: 230 cubic Mtrs/hr
l Voltage: 220-240V/50Hz
l Power consumption: 25W (max)
l Rated: 44.8(dB)
l Glass thickness: 4-28mm
l Class II (double insulated)
l IPX4
l
l
XF6WINP
12
XF6WINPT
Code
Description
Type
Glass (mm)
Dimensions (mm)
XF6WINP
6” Manual Fan with Window Kit
Pullcord
4-28
230 x 230 x 79
XF6WINPT
6” Manual Fan with Window Kit c/w Timer
Pullcord
4-28
230 x 230 x 79
Suitable for kitchens,
restaurants, offices and
domestic use
In-line Shower Fans
XSF Series - Extractor Fan Kit
4” & 6” In-line Shower Extractor Fan Kit
BS EN60335-1: 2012
Kit comprises of two grills, one in-line fan and 3Mtr length of ducting with
fixing cable ties
l Supplied with comprehension installation instructions
l Air movement:
4" - 95 cubic Mtrs/hr
6” - 230 cubic Mtrs/hr
l Power consumption: 4” - 20W (max) / 6” - 25W (max)
l Voltage: 220-240V/50Hz
l
l
XSF4TKIT
Code
Description
Mounting
Timer
Dimensions (mm)
XSF4S
4” Standard In-line Fan
Flat Position
Continuous
156 x 147
XSF4T
4” Standard In-line Fan c/w Timer
Flat Position
2-20 mins
156 x 147
XSF6S
6” Standard In-line Fan
Flat Position
Continuous
156 x 191
XSF6T
6” Standard In-line Fan c/w Timer
Flat Position
2-20 mins
156 x 191
Shower Fans
SF Series
SFL4S/SFL4T
4” Shower Light & Extractor Fan Kit
BS EN60335-2-80 & BS EN60598-2-1
Includes lamp and 240V-12VAC 60W electronic transformer
l Thermal safety cut-out protection for transformer
l Air movement: 90 cubic Mtrs/hrs
l Voltage: 220-240V/50Hz
l Power consumption: 20W (max)
l Rated: 48.6(dB)
l Class II (double insulated)
l IPX4
l
l
Kit comprises:l Grill, 1 x In-Line Fan, 3Mtr length
of Ducting, Transformer, Lamp
and Chrome Grill
Humidistat Fan
Code
Description
SFL4S
4” Shower Fan With Light
20
SFL4T
4” Shower Fan With Light & Timer
20
Centrifugal Fan
4” Ventilation Extractor Fan
Features...
Wattage
4” Ventilation Extractor Fan
XCF100 - 4” Centrifugal Extractor Fan
The Humidistat extractor is controlled by a built in humidity sensor,
it starts when the humidity level in the room exceeds a certain
preset level and stops operating when the humidity falls below the
preset level
n Fan is also equipped with a pullcord switch, humidistat can be
overridden with a pull cord switch for continuous operation. When
pull cord switch is placed in the off position, the unit is controlled
by humidistat
XF4H
n
BS EN60335-2
Suitable for use where the ducting length is two metres or more
l Wall or ceiling mounting with integral back draft shutter
l Air movement: 110 cubic Mtrs/hr
l Voltage: 220-240V/50Hz
l Power consumption: 45W (max)
l Double insulated units
l IPX4
l
l
XF4H - Humidistat
Extractor Fan
BS3456 part 102.342
Voltage: 220-240V/50Hz
l Air movement: 230 cubic Mtrs/hr
l Rated: 44.8(dB)
l Complete with comprehensive
installation instructions
l Class II (double insulated)
l IPX4
l
l
Code
Description
XF4H
4” Fan with Humidistat
13
XCF100
Timer
Dimensions (mm)
Humidity
164 x 154 x 88
Code
Description
Spigot
Dimensions (mm)
XCF100
4” Centrifugal Fan
97mm
240 x 170 x 125
...control when you need it
12V Extractor Fan
XF Series
4” Extractor 12 Volt Safety Extractor Fan
Extra Low Voltage
BS EN60335 part 102-342
These fans are designed to be safely fitted over or within 0.6Mtrs of a
bath or shower where current regulations prevent the use of conventional
fan motors
l Fitted with 12VAC/50Hz
l Air movement: 95 cubic Mtr/hr
l Voltage: 12VAC/50Hz
l Double insulated units
l IPX4
l
l
XFE4T12V
Controller for XFE4T12V
BS EN60335 part 102-342
Neon indicator fitted to all models
l Output: 12VAC/50Hz, 30vA 30W (max) SELV
l Double insulated
l IP30
l
l
XFE4T12TC
14
Code
Description
Type
Dimensions (mm)
XFE4T12V
4” Extractor Fan 12V no Controller
Fixed Grill
145 x 90 x 55
XFE4T12TC
Controller for 12V Fan with Timer
Controller
165 x 155 x 88
Fixed & Gravity Grills
XF Series - Extractor Kits
4” & 6” Fixed & Gravity Grills for Extractor Fans
l
l
Manufactured from high gloss ABS material
Outside diameter of exhaust inlet 100mm & 150mm
4” & 6” Extractor Grills
Code
Description
Dimensions
Hole Size
Colour
Box/Qty
XF4G
4” Fixed Grill
140x140x54mm
103
White/Grey/Brown
10
XF6G
6” Fixed Grill
174x174x56mm
153
White/Grey/Brown
10
XGG4
4” Gravity Grill
140x140x54mm
103
White/Grey/Brown
10
XGG6
6” Gravity Grill
174x174x56mm
153
White/Grey/Brown
10
*Please add suffix ‘W’ for White, ‘G’ for Grey,’ B’ for Brown after grill code
4” & 6” Window Kits for Fans
Fixed Grill
Gravity Grill
Code
Description
Dimensions
Hole Size
Colour
Box/Qty
XWK4FS
4” Window Kit Fixed Shutter
164x154mm
128-135
white
1
XWK4GS
4” Window Kit Gravity Shutter
164x154mm
128-135
white
1
XWK6FS
6” Window Kit Fixed Shutter
230x200mm
184-192
white
1
XWK6GS
6” Window Kit Gravity Shutter
230x200mm
184-192
white
1
*Only available in White
Flexible Ducting
PVC & Aluminium
Flexible Ducting
Manufactured from flame retardant pvc material
100mm for 4” & 150mm for 6”
l White PVC ducting available in 3 metre lengths
l Each piece is separately netted and individually packed
l PVC in 3Mtr length / Aluminium in 0.32Mtr length
l
XD63P
l
XD43P
XD43P
Code
Description
Length
Material
Colour
Box/Qty
XD43P
4” PVC Ducting
3Mtr
PVC
White
48
XD63P
6” PVC Ducting
3Mtr
PVC
White
24
XD4AL
4” Alu Ducting
320mm
Aluminium
Silver
48
XD6AL
6” Alu Ducting
320mm
Aluminium
Silver
24
XD4AL
BugMaster
Fly Killers
Domestic & Industrial
FK6 - 10W Fly Killer (Domestic)
BS EN60335, (TUV-GS) EMC CE
Mounting: Free standing or ceiling mounted
l Effective Coverage Area: 5Mtrs2
l Colour: Black finish
l Voltage: 230VAC~50Hz
l Grid Voltage: 1100VDC
l Lamp: 10W - UV lamp
l Suitability: Indoor use only
l Dimensions: (H)315 x (D)Ø133mm
l
l
BFK20
NEW DESIGN
20W - 40W Fly Killer (Industrial)
BS EN60335, (TUV-GS) EMC CE - IPX0 protection class
Approved transformer with magnetic ballast
l High quality lamps 8,000 hrs tube
l Dual Mounting: Wall/Ceiling
l construction: Silver body with plastic end caps
l Colour: Silver
l Voltage: 240VAC/50Hz - Grid voltage: 2200W killing grid
l Fuse protection: 2 Amp
l Suitability: Food factories, restaurants, bars & cafes, hospitals, chemists,
supermarkets, fast food and butchers etc.
l
l
Code
Wattage
Mtrs
10
BFK20
FK6
Lamp Code
Dimensions (mm)
Box/Qty
5
FK6L
315 x Ø133
1/12
20
80
BFK10L
392 x 113 x 298
1/4
BFK30
30
120
BFK15L
498 x 113 x 330
1/3
BFK40
40
150
BFK20L
648 x 113 x 400
1
2
Domestic
FK6
Industrial
Code
FK6L
BFK10L
BFK15L
BFK20L
Description
Tube 10W for FK6
Lamp for BFK20
Lamp for BFK30
Lamp for BFK30
Min/Box
1
1
1
1
...control when you need it
15
Hand Dryers
Hand & Face - Heavy Duty
2.5kW Hand Dryer - Heavy Duty
BS EN60335-2:2003 - IP21
Voltage: 2500W 240V/50Hz
l Cable: 3 Core x 1.5mm 1 Mtrs 13A
l 360° rotating nozzle to suit hand or face use
l Air velocity: 30m/s
l Air volume: 270 Cubic Mtr/hr
l Long lasting motor, durable, vandal-proof and energy saving
l Weight: 6kg
l Push button: 35 second every press
l Automatic: 10-15 secs (drying time)
l Suitable for use in high traffic areas
such as service station, clubs,
railway stations and similar projects
l
l
HDM25ACHR
16
HDM25AWHI
HDM25PCHR
HDM25PWHI
Code
HDM25ACHR
HDM25AWHI
HDM25PCHR
HDM25PWHI
Description
Hand Dryer 2.5kW
Hand Dryer 2.5kW
Hand Dryer 2.5kW
Hand Dryer 2.5kW
Type
Automatic
Automatic
Push Button
Push Button
Colour/Finish
S/Chrome (Brushed Steel)
White (Powder Coated)
S/Chrome (Brushed Steel)
White (Powder Coated)
Dimensions
WxHxD (mm)
270 x 240 x 200
270 x 240 x 200
270 x 240 x 192
270 x 240 x 192
Box/Qty
1
1
1
1
Automatic Dryers
Durable ABS & Diecast
HD1800A - 1.8kW Hand Dryrer
ABS (Automatic)
BS EN60335-2:2003
CE approved
l Voltage:- 240V~50Hz Wattage 1800W
l Automatic, drip protection
l Body: ABS
l Colour: White
l Auto power off after 1 min continuous working adjustable
sensor (timer)
l Overheat thermal cut out protection
l Fixing hole top 136mm - fixing hole bottom 192mm
l Noise level: 1Mtr - 65(dB)
l Outer carton: 4pcs
l
l
HD1800A
AUTOMATIC-DRIP
Protected
HDM18A - 1.8kW Hand Dryer DieCast (Automatic)
BS EN60335-2 - IP21
Voltage: 1800W 240V~50Hz
l Air velocity: 18M/s
l Air volume: 147 Cubic Mtr/hr
l Cable: 3 Core x 1mm 1Mtr 13A 3 pin fused moulded plug
l Sleek Euro-style design with Die-cast cover
l Long lasting motor
l Drying time 30 secs - 60 Seconds for each cycle
l Durable and fireproof
l Dimensions: 245 x 263 x 245mm
l
l
HDM18A
HD2400A - 2.4kW Hand Dryer
Die-Cast (Automatic)
BS EN60335-2
CE approved
l Voltage 240V~50Hz Wattage 2400W
l Automatic, Drip Protection
l Body: Metal (die-cast)
l Colour: White
l Over Heat Thermal Cut Out Protection
l Auto Power Off 1 min continuous working adjustable sensor
l Fixing Centre Top & Bottom:- 212mm
l Noise Level: 65(dB) at 1Mtr
l Outer carton: 2pcs
l Dimensions: 266 x 248 x 165mm
l
l
HD2400A
AUTOMATIC-DRIP
Protected
17
Code
HD1800A
HDM18A
HD2400A
Description
1.8kW Hand Dryer
1.8kW Hand Dryer
2.4kW Hand Dryer
Type
Automatic
Automatic
Automatic
Material
ABS
Die-Cast
Die-Cast
kW
1.8
1.8
2.4
Colour
White
White
White
Dimensions
WxHxD (mm)
262 x 274 x 196
245 x 263 x 245
266 x 248 x 165
Box/Qty
1
1/4
1/2
...control when you need it
High Speed
Hand Dryer
Blade - High Speed Jet
HDBL1 - 1.9kW High Speed Jet Hand Dryer
IEC 60335-2-23, CE & RoHS approval
Energy efficient
l More hygienic
l 85-95M/s air speed
l Noise Level: 70dB
l DC brush less motor reduces wear and tear
l 5-7 Second drying time
l 1000 uses daily service
l Stable operation
l Removable drip tray with water indicator
l Sensors at top and bottom of unit detect
hand presence and removal
l Colour: White
l Rated: Indoor use only
l 220-240VAC~50/60Hz
l Weight: 11kg
l Fully guaranteed for 1 year
l
l
HDBL1
NEW DESIGN
18
Hand Dryer
Cyclone - High Speed
HDHS11 - 1.1kW Hand Dryer (ABS)
IEC 60335-2-23, CE & RoHS approval
1100W hand dryer
l 220-240V/50Hz 60Hz
l Construction: ABS shell
l Rated: IPX1
l 90M/s air speed
l Noise Level: 65dB
l Weight 3.5 Kg
l AC220-240V 50/60Hz
l Fully guaranteed for 1 year
l Switch to work efficiently on hot or cold air
l Colour: White
l
l
HDHS11
NEW DESIGN
Code
Description
HDBL1
800W+1100W Hand Dryer
HDHS11 1100W Hand Dryer (White)
Air Speed
(M/s)
85-95
90
Dimensions
HxWxD (mm)
687 x 300 x 220
248 x 250 x 178
Box/Qty
1
1
High Speed
Hand Dryers
Turbo - High Speed
Turbo Hand Dryer
IEC 60335-2-23, CE & RoHS approval
220-240VAC~50/60Hz
l1800W metal high speed hand dryer
lAir speed: 90 (m/s)
lNoise Level: 72dB
lCarbon brush motor
lDrying time: 7-10 seconds
lLED lamp indicates standby mode
lStainless steel 304 panel with thickness of 1.5mm
lEquipped with sensing indicator lamp (LED)
lAvailable in White and Brushed Chrome
lEfficient design air outlet
lRated: IPX1
lWeight: 6Kg
lFully guaranteed for 1 year
l
l
HDT2WHI
NEW DESIGN
N.B. Chrome finish also available.
Turbo Classic Hand Dryer - Mini
HDMINI/CHR
NEW DESIGN
World’s smallest hand dryer 240V 50/60Hz
Energy efficient:- up to 85% more energy efficient then conventional
warm air hand dryer
lIntelligent:-heater start on/off automatically
lDurable:- with 1.0mm 304 stainless steel body
lHigh speed - Class II
lPower consumption:- 650W (heater off when temp v>25°C) 1200W
(heater on when <25°C
l
l
Type
Drying Time
(secs)
Air Speed
(m/s)
Colour
Dimensions (mm)
1800W Stainless Steel Hand Dryer
Automatic
7-10
90
White
278 x 172 x 325
HDT2CHR
1800W Stainless Steel Hand Dryer
Automatic
7-10
90
Chrome
278 x 172 x 325
HDMINI/CHR
650W/1200W Stainless Steel Hand Dryer
Automatic
10-15s
65
Chrome
260 x 180 x 157
Code
Description
HDT2WHI
Turbo Classic Hand Dryer - High Speed
IEC 60335-2-23, CE & RoHS approval
220-240VAC~50/60Hz
l1800W metal high speed hand dryer
lMotor power: 600W
lAir speed: 90 (m/s)
lNoise Level: 72dB
lDrying time: 7-10 seconds
lSensing distance: 12± 3cm
lAir temperature: 40-65◦C
lStainless steel 304 panel with thickness of 1.5mm
lAvailable in White and Chrome
lRated: IPX1
lWeight: 4.5Kg
lFully guaranteed for 1 year
l
HDCT2CHR
l
HDCT2WHI
19
Type
Drying Time
(secs)
Air Speed
(m/s)
Colour
Dimensions (mm)
HDCT18WHI 1800W Classic Stainless Steel Hand Dryer
Automatic
7-10
90
White
295 x 171 x 325
HDCT18CHR 1800W Classic Stainless Steel Hand Dryer
Automatic
7-10
90
Chrome
295 x 171 x 325
Code
Description
...control when you need it
Immersion Heaters
Water Supply Systems
Features...
BS EN60335-2 approved
New Range with safety cut-out
n Output:- 3kW 15Amp
n Voltage:- 240v - 50Hz
n Immersion heater made from standard copper alloy
n Sizes:- 11”, 14”, 18”, 23”, 27”, 30” & 36”
n The new thermostats have a second set of contacts which opens and
limits the water temperature to 98 deg centigrade should the primary
thermostats fail
n The second cut out is non self resetting
n Stats:- BS EN60730-2 - 7”, 11”, 18” 15Amp 250v (suitable for top or side
entry)
n Stat with preset level 60°
n 21/4” Standard threaded head
n
n
IHS7ST
20
IH14SC
Heater Controller
Economy 7 Timer (Quartz)
Code
Description
Wattage
Stats Size
Origin
IH11SC
IH14SC
IH18SC
IH23SC
IH27SC
IH30SC
IH36SC
IHS7ST
IHS11ST
Immersion Heater 11 Inch
Immersion Heater 14 Inch
Immersion Heater 18 Inch
Immersion Heater 23 Inch
Immersion Heater 27 Inch
Immersion Heater 30 Inch
Immersion Heater 36 Inch
Immersion Heater Stat 7 Inch
Immersion Heater Stat 11 Inch
3kW
3kW
3kW
3kW
3kW
3kW
3kW
250v 15A
250v 15A
7”
7”
11”
11”
18”
18”
18”
top/side entry
top/side entry
UK
UK
UK
UK
UK
UK
UK
UK
UK
IHS18ST Immersion Heater Stat 18 Inch
250v 15A
top/side entry
UK
Immersion Heating Controller...
BEAB approved
Voltage - 13Amp 240v 50Hz - suitable for immersion heaters up to 3kW
n Contact - Micro Gap double pole isolator switch
n Battery Reserve - Stand by battery up to 150 hrs in case of mains failure
n Isolator Switch - Double switch isolates the immersion heater leaving
the clock running
n Off Peak - Adjustable between 4 1/2 & 7 hrs
n Boost - 0 - 60 mins boost means extra hot water any time
n Reliable and accurate quartz controlled
n Dimensions - 170x115x56mm WxHxD
n
n
HORE7Q
Code
HORE7Q
HORE7ELE
Description
Heating Control Timer “Economy 7”
1 hour boost BEAB 150Hrs battery
Heating Control Timer “Economy 7”
1 hour boost BEAB 150Hrs battery
Boost
Colour
Dimensions (mm)
1 Hour
White
170 x 115 x 56
1 Hour
White
170 x 115 x 58
Time Switches
(Industrial/Commercial)
Time Switches
General Purpose...
IMT7E
Surface Mounting
Electronic & Mechanical
Approval - BS EN60730, GS, CE
15 minutes On/Off switching interval - 24Hrs
n Electromechanical timer with override switch
n 16Amp 240v - 50Hz (inductive load 8Amp)
n Suitable for immersion heating and general purpose control
n Captive tappets
n
n
Available In - IMT24H, IMT7E Surface mounting
IMT24H
Code
As above function...
Description
Immersion Heater & General
Purpose Timer 16A 24Hr (hard
IMT24H
wired) Surface Mounted
Mechanical (Manual) 15 min.
Immersion Heater & General
Purpose Timer 16A 7 Day
IMT7E
Electronic (hard wired) Surface
Mounted 6 On/Off Every Day.
Flush Mounting
Electronic & Mechanical
Approval - BS EN60730, GS, CE
15 minutes On/Off switching interval - 24Hrs
n Electromechanical timer with override switch
n 16Amp 240v - 50Hz (inductive load 8Amp)
n Suitable for immersion heating and general purpose control
n Captive tappets
n 24Hr / 7 Day - application
n Programmable - shortest switching time 1 minute
n 42 setting over a period of 1 week - 6 function each day
n Battery reserve 100Hrs
n Manual override switch
n Terminal Capacity - 2.5mm2
n LCD display 4mm high
Mounting
Amps
Hours
Surface
16
24
Surface
15
24/7
n
n
FT7E
Available In - FT24H, FT7E Flush or surface mounting fits into 35mm deep plastic or metal box
FT24H
21
Code
FT24H
FT7E
Description
General Purpose Mechanical
Timer 24Hrs 16A 15 min.
Segement fits into 35mm box
(hard wired)
General Purpose Electronic Timer
On/Off Position 7 Days / 24 Hrs
- 16 A fits into 35mm box (hard
wired)
Mounting
Amps
Hours
Surface
16
24
Surface
15
24/7
...control when you need it
20
Pro-Fix
Tools & Faste
nings
Catalo
gue fo
r 2011
/2
012
Wiring A
ccesso
20
2014-2015
Designed to perform
easy to install
ries
By
By
Metal
Consumer Units
coming soon!
Countrywide Electrical Distributors
44-48 Freshwater Road, Dagenham,
Essex RM8 1RX (United Kingdom)
020 8503 8500
020 8503 8900
www.ced-elec.co.uk
info@ced-elec.co.uk
Our all new
Metal Consumer
Units publication
coming October
2015.
Another Quality Brand
by
These are some of our other catalogues that you may find
helpful in making your buying decisions.
If you would like a copy of any of product material, please
contact our sales team and they will send you your own
copy.
AirMaster by CED / Published 01-08-2015
Artwork & Design by Pat & Fury Friends
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising