technical specifications key features general description application

technical specifications key features general description application
Q 115
REINFORCEMENT LOUDSPEAKER
World-wide distributor FBT
FBT Elettronica S.p.A.
www.fbt.it
KEY FEATURES
Enclosure in 18 mm birch wood
Custom 15” neodymium woofer with 3” coil
2” driver with 3” coil
Dual-mode passive filter
Full Range or Bi-amp operation mode
APPLICATION
Fixed installation
Theatres
Disco
Concert venue
Band-pass
GENERAL DESCRIPTION
The Q 115 is a full-range, 2-way bass reflex loudspeaker system. Equipped with a single neodymium 15” woofer (3” coil) and a 2”
compression driver (3” coil) coupled to a constant directivity rotable horn with 60°H x 40°V coverage. The outstanding performance of
this speaker depends not only on the use of high quality transducers but also on precise design of passive cx-over. Designed for high
sound levels (131.5 dB SPL), the Q 115 is perfect for every type of situation, from disco to concert venue.
With its controlled dispersion, low distortion and bass extension, the Q 115 is ideal in fixed installations in night clubs, pubs, theatres
or sound reiforcements in live performance.
The cabinet is constructed fro 18mm birch polywood finish in a durable and scratch resistant paint. Dual-mode passive filter with
facility for full-range or bi-amp operation with external processing of the signal.
4M10anchoring points for suspended installation and full compatibility with dedicatedmounting hardware.
The connector panel’s have dual Neutrik NL4 speakon for reliable input and loop through connections.
TECHNICAL SPECIFICATIONS
ELECTRICAL PERFORMANCE
Configuration
Recommended amplifier (1)
Long term power AES (2)
Short term power IEC 268-5
Nominal impedance
Frequency response @-6dB (3)
Sensitivity @1W, 1m (4)
Max SPL (5)
Dispersion @-6 dB (HxV) )
Crossover frequency
Recommended HP filter
Additional data:
PHYSICAL
2 WAY
BI-AMP
600W LF / 100W
800W rms
400W LF / 80W HF
400 W
1400W LF / 320W HF
1400 W
8 ohm LF / 8 ohm HF
8 ohm
45 Hz -18 kHz
45 Hz - 18 kHz
99.5 dB LF / 108 dB HF
99.5 dB
131.5 dB LF / 133 dB HF
131.5 dB
60° x 40°
60° x 40°
1.5 kHz - 24 dB oct.
1.5 kHz
35 Hz - 24 dB oct.
35 Hz - 24 dB oct.
Low frequency woofer
High frequency driver
Input connectors
Net dimensions (WxHxD)
Net weight
Enclosure materials
Finish
Grille
1 x 15” - coil Ø 3”
1 x 2” + coil Ø 3”
2 x speakon NL4 paralleled
485 x 750 x 480 mm
35 kg
18 mm birch wood
wear-resistant textured black paint
black powder coated perforated steel
with foam
automatic resetable driver protection
in full-range filter mode
(1) amplifier power on nominal loudspeaker impedance
(4) average SPLmeasured over the freq. response range
(2) 2 hours, pink noise with crest factor 2, applied RMS voltage corresponding to the power on theminimum of
themodulus of the impedance of the speaker in full rangemode, or of the driver in bi-amp mode.
(5) calculated based on short term power capacity and measured 1W, 1m
full space sensitivity
(3) full-space on axis
Q 115
REINFORCEMENT LOUDSPEAKER
World-wide distributor FBT
FBT Elettronica S.p.A.
www.fbt.it
Q FACTOR & DIRECTIVITY INDEX (DI)
Q(f)
DI(f)
dB SPL
110
105
100
95
90
85
80
75
70
65
100
10
60
55
50
10Hz 20
1
100
1000
-18--6
-6-6
10000
FULL SPACE FREQUENCY RESPONSE
50
100
200
500
1k
2k
5k
10k
HORIZONTAL BEAMWIDTH (-6dB)
-18--6
Deg.
-6-6
VERTICAL BEAMWIDTH (-6dB)
90°
80°
70°
60°
50°
40°
30°
20°
10°
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
dB
90°
80°
70°
60°
50°
40°
30°
20°
10°
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
Freq.
Freq.
VERTICAL POLAR DIAGRAM
500
210
200
190
230
180
0
170
160
500
210
150
200
190 0
230
130
-30
100
260
-30
270
-36
90
270
-36
80
280
290
340
350
0
10
20
8000
210
200
190
180
170
160
230
240
4000
150
350
0
200
190
230
120
110
180
240
250
-30
270
-36
90
270
-36
80
280
310
50
320
40
330
340
350
0
10
20
30
150
140
130
120
110
-24
260
70
160
16000
-18
100
60
170
-12
-30
280
12500
0
260
300
20
-6
220
130
290
10
8000
210
140
-24
340
30
HORIZONTAL POLAR DIAGRAM
16000
-18
250
50
40
330
-12
90
320
12500
0
100
60
30
-6
220
110
310
VERTICAL POLAR DIAGRAM
4000
120
70
40
330
130
80
50
320
140
300
60
310
150
290
70
300
160
-24
260
280
170
-18
250
110
-24
180
2000
-12
240
120
1000
-6
220
140
-18
250
250
2000
-12
240
HORIZONTAL POLAR DIAGRAM
1000
-6
220
40k
Deg.
dB
250
20k
100000
100
90
80
290
70
300
60
310
50
320
40
330
340
350
0
10
20
30
Q 115
REINFORCEMENT LOUDSPEAKER
World-wide distributor FBT
FBT Elettronica S.p.A.
www.fbt.it
DIMENSION DRAWINGS
INPUT PANEL & BLOCK DIAGRAM
485
357
338
ARCHITECTURAL & ENGINEERING SPECS.
The 2-way full range loudspeaker shall incorporate one 15” LF transducer
and a 2” HF driver.
The HF driver shall be loaded on a rotable horn with a nominal coverage
pattern of 60° (H) x 40° (V).
An internal dual-mode passive filter with HF protection shall provide
acoustical crossover and system equalization.
Input panel shall easily change from passive to biamp operation via internal
connector.
System frequency response shall vary no more than +/- 6dB from 45Hz to
18kHzmeasured on axis.
The loudspeaker shall produce a sound pressure level (SPL) of 131.5 dB on
axis at 1 meter.
It shall handle 400 watts of amplifier power long term (AES standard) and
shall have a nominal impedance of 8 ohm.
It shall be constructed of 18mm Baltic birch wood with internal
reinforcement.
Input connectors shall be two NL4 speakon.
The front of loudspeaker shall be covered with a powder-coated perforated
grille with foam.
The 2-way full-range loudspeaker shall be the QUBEmodel Q 115
FULL-RANGE (PASSIVE)
HF
1-
LF
BI-AMPLIFIED
2+
21+
1-
2+
21+
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement