null  null
TruTorqueTM Screwdriver
Models 1.5 N.m to 6 N.m (13 lbf.in to 53 lbf.in)
Norbar’s new range of Torque Screwdrivers embodies the values of the TruTorque brand - accuracy, ease of use and comfort
in use. With an accuracy that exceeds the requirement of ISO6789 (+/-6% for tools up to 10 N.m). Furthermore, they are
engineered to retain this accuracy over many thousands of tightened cycles.
• Supplied with a 1/4” hexagon bit holder designed using a 4mm hexagon stem.
• For maximum versatility and particularly for applications with limited access, the bit holder can be removed and replaced
with widely available screwdriver blades.
•
•
•
•
Easy torque adjustment without the need of additional specialist tools.
All tools feature a lock to prevent accidental adjustment of the set torque.
Accuracy exceeds the requirements of ISO6789.
Traceable calibration certificate for the clockwise direction supplied with all
adjustable tools (not ‘P’ Types).
• Tool ‘slips’ when torque is achieved removing the possibility of
‘overtightening’.
• Comfortable, durable handle. The handle is constructed using two
materials; a base material for strength overlaid with a soft feel grip
for comfort and slip resistance.
Bit holder can
be removed
and replaced
with any
widely available
screwdriver
blades.
Adjustables - N.m
TTs1.5 N.m
13475
Range
N.m
0.3 - 1.5
TTs3.0 N.m
13476
0.6 - 3
155
0.235
TTs6.0 N.m
13509
1.2 - 6
155
0.235
Range
lbf.in
2.5 - 13
5 - 26
10 - 53
Length
mm
155
155
155
Weight
Kg
0.235
0.235
0.235
Model
Part No
Length
mm
155
Weight
Kg
0.235
Adjustables - lbf.in
Model
TTs13 in.lb
TTs26 in.lb
TTs53 in.lb
Part No
13515
13516
13517
Production ‘P’ Type
12
Model
Part No
TTs1.5
TTs3.0
TTs6.0
13510
13511
13512
Range
N.m
0.3 - 1.5
0.6 - 3
1.2 - 6
lbf.in
2.5 - 13
5 - 26
10 - 53
Length
mm
155
155
155
Weight
Kg
0.235
0.235
0.235
TruTorque™ Wrench
Models 20 N.m and 50 N.m
(180 lbf.in and 35 lbf.ft)
Durability has been a primary development goal – both in terms
of the lifetime of components and longevity of calibration accuracy.
Cycle testing of wrenches at full torque was a key element of the
development process and, in total, several million tightening cycles were
accumulated. The result is a product that you can use with complete
confidence that you have the best tool for the job.
• Accuracy: +/-3% of reading exceeds all international standards for
torque wrenches. Each wrench is supplied with a traceable calibration
certificate.
• Micrometer Scale for simple and error free setting. (On dual scale wrenches, the micrometer increment applies to
the N.m scale.)
• Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with minimal effort in
approximately ten complete turns (exact number varies by model).
• Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.
• Versatile Ratchets: the tough ratchets are reversible and have a narrow engagement angle of 5º to allow easy
positioning of the tool in the tight confines of today’s vehicles and machines.
• Comfortable, Durable Handle: the handle is constructed using two materials: a base material for strength overlaid with
a soft feel grip for comfort and slip resistance. The handle material and lens resist chemicals in common usage in the
automotive, aviation and industrial environments.
Norbar Non-Magnetic torque
wrenches are designed primarily for the
medical MRI scanner market. However,
they will prove invaluable where ever
a torque wrench has to be used in the
presence of a strong magnetic field.
There are currently two models: 1 - 20
N.m, Part Number 13292 and 8 - 50
N.m, Part No. 13293.
Ratchet Adjustables - Dual Scale
Model
Square
Drive
in
Part No
/4
30
72
230
0.4
/8
13263
1-20
10-180*
0.05
30
72
230
0.4
/8
13264
8-50
6-35
0.1
30
72
278
0.5
/2
13265
8-50
6-35
0.1
30
72
278
0.5
1
0.05
TT50
10-180*
3
1-20
TT50
13262
3
N.m
TT20
lbf.ft
TT20
N.m
1
Ratchet
Diameter
mm
Range
Resolution
Engagements
per revolution
Length
Weight
mm
Kg
*lbf.in
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
13
TruTorqueTM Wrench
Models 100 N.m to 300 N.m (75 lbf.ft to 250 lbf.ft)
In engineering this range, Norbar has paid close attention to accuracy, ease of setting and comfort in use.
Durability has been a primary development goal – both in terms of the lifetime of components and longevity of calibration
accuracy. Cycle testing of wrenches at full torque was a key element of the development process and, in total, several million
tightening cycles were accumulated. The result is a product that you can use with complete confidence that you have the best
tool for the job.
• Accuracy: +/-3% of reading exceeds all international standards for torque
wrenches. Each wrench is supplied with a traceable calibration certificate.
• Micrometer Scale for simple and error free setting. (On dual scale wrenches,
the micrometer increment applies to the N.m scale.)
• Quick and Light Adjustment: adjustment over the entire scale can quickly be
achieved and with minimal effort in approximately ten complete turns (exact
number varies by model).
• Adjustment Lock: all models feature a lock to prevent accidental adjustment
of the set torque.
• Versatile Ratchets: the tough ratchets are reversible and a narrow
engagement angle of 6º to allow easy positioning of the tool in the tight
confines of today’s vehicles and machines.
• Bi-directional Torque: the ratchets are also ‘push through’ meaning that these
wrenches will provide torque control in both the clockwise and anticlockwise
directions.
• Comfortable, Durable Handle: the handle is constructed using two materials:
Tru Torque
is available with
either dual scale (N.m
and lbf.ft) or single scale
(N.m or lbf.ft)
a base material for strength overlaid with a soft feel grip for comfort and
slip resistance. The handle material and lens resist chemicals in common
usage in the automotive, aviation and industrial environments.
Ratchet Adjustables - Dual Scale
Model
Part No
Square
Drive
in
3
/8
1
/2
1
/2
N.m
20-100
20-100
30-150
lbf.ft
15-75
15-75
20-110
N.m
0.5
0.5
0.5
/2
40-200
30-150
1.0
/2
/2
50-250
60-300
40-185
45-220
1.0
1.0
TT100
TT100
TT150
13266
13267
13268
TT200
13269
1
TT250
TT300
13270
13271
1
1
Model
Part No
Ratchet
Diameter
TT100
TT100
TT150
13266
13267
13268
mm
38
38
38
TT200
13269
TT250
TT300
13270
13271
Range
Engagements
per
Revolution
Resolution
Length
Weight
60
60
60
mm
405
405
455
Kg
1.0
1.0
1.1
46
60
505
1.2
46
46
60
60
560
610
1.4
1.6
N.m only and lbf.ft only versions are available, contact your local office for details.
14
TruTorqueTM TTi
Wrench
Models 50 N.m to 300 N.m (35
lbf.ft to 250 lbf.ft)
TruTorqueTM TTi wrenches feature the same accuracy, ease of
setting and comfort in use as the regular TruTorqueTM models. They
add to this formula non-reversible push through ratchets which are
ultra robust and very simple to use. Body tubes and ratchets are finished
in an attractive and durable satin chrome plate.
• Accuracy: +/-3% of reading exceeds all international standards for torque
wrenches. Each wrench is supplied with a traceable calibration certificate.
• Micrometer Scale for simple and error free setting. (On dual scale wrenches,
the micrometer increment applies to the N.m scale.)
• Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with minimal effort in
approximately ten complete turns (exact number varies by model).
• Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.
• Versatile Ratchets: the tough ratchets have a narrow engagement angle of 5º on the TTi50 and 6º in all other models
allowing easy positioning of the tool in the tight confines of today’s vehicles and machines.
• Bi-directional Torque: the ratchets are ‘push through’ meaning that these wrenches will provide torque control in both the
clockwise and anticlockwise directions.
• Comfortable, Durable Handle: the handle is constructed using two materials: a base material for strength overlaid with
a soft feel grip for comfort and slip resistance. The handle material and lens resist chemicals in common usage in the
automotive, aviation and industrial environments.
Ratchet Adjustables - Dual Scale
Model
Square
Drive
in
N.m
lbf.ft
N.m
Ratchet
Diameter
mm
Part No
/8
13438
8-50
6-35
0.1
30
72
278
0.5
/2
13439
8-50
6-35
0.1
30
72
278
0.5
/8
13440
20-100
15-75
0.5
38
60
405
1.0
/2
13441
20-100
15-75
0.5
38
60
405
1.0
/2
13442
30-150
20-110
0.5
38
60
455
1.1
/2
13443
40-200
30-150
1.0
46
60
505
1.2
/2
13444
50-250
40-185
1.0
46
60
560
1.4
/2
13445
60-300
45-220
1.0
46
60
610
1.6
TTi50
3
TTi50
1
TTi100
3
TTi100
1
TTi150
1
TTi200
1
TTi250
1
TTi300
1
Range
Resolution
Engagements
per revolution
Length
Weight
mm
Kg
N.m only and lbf.ft only versions are available, contact your local office for details.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
15
Professional Torque Wrench
‘Automotive’ Ratchet Models
The Professional torque wrench offers an ideal combination of accuracy, robust construction, comfort and ease of use.
The reversible ratchets on these models are designed with compact dimensions and a narrow engagement angle resulting from
the 72 tooth pattern. These features make the wrench ideal for use in the confined spaces of modern motor vehicles and many
other applications.
• Accuracy of ±3% of reading exceeds all international standards for torque wrenches.
• Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO 9000:2000.
• Soft feel handle provides excellent grip even in oily conditions.
• Handle material and lens resist all chemicals in common automotive, industrial and aviation use.
• Locking mechanism prevents accidental adjustment of the wrench during operation.
• Long scale graduated in N.m and lbf.ft allows for foolproof and accurate setting.
• Supplied in moulded box for storage and protection.
Ratchet Adjustables - Automotive Ratchet
N.m
8-60
8-60
20-100
lbf.ft
5-45
5-45
15-80
/2
20-100
15-80
/2
40-200
30-150
Part No
60
60
100
13010
13011
13012
100
13013
1
200
13014
1
Part No
Ratchet
Diameter
60
60
100
13010
13011
13012
mm
31
31
31
100
13013
200
13014
Model
18
Square Drive
in
3
/8
1
/2
3
/8
Model
Range
Engagements
per
Revolution
Length
Weight
72
72
72
mm
307
307
347
Kg
0.6
0.6
0.7
31
72
347
0.7
41
72
443
1.0
Professional Torque
Wrench
‘Industrial’ Ratchet Models
These wrenches offer the same outstanding features as those on
the previous page but with a wider model range – up to 400 N.m –
and a different ratchet concept.
The push-through ratchets on these models are robustly engineered for
strength and durability. The strength and high wear resistance comes from
the design of the tooth pattern while a principle of offset ratchet pawls
gives a narrow engagement angle of 5º on wrenches up to and including
Model 200 and 6º on Models 300 to 400.
The push through square drive is not only a robust design but allows the wrench
to be used for torque control in both the clockwise and anti clockwise directions.
Please note that the 3/4” square drive of the Model 400 has to be removed and
re-inserted on the other side of the ratchet head rather than pushed through.
Ratchet Adjustables - Industrial Ratchet N.m/lbf.ft Models
Model
Square
Drive
in
Part No
/8
lbf.in Models
N.m
lbf.ft
Ratchet
Diameter
mm
13042
8-60
5-45
35
312
0.66
13075
70-530
/2
13043
8-60
5-45
40
320
0.74
13076
70-530
/8
13044
20-100
15-80
35
353
0.73
13077
100-800
/2
13045
20-100
15-80
40
359
0.80
13078
100-800
/2
13046
40-200
30-150
42
442
1.01
13079
400-1800
/2
13047
60-300
45-220
49
570
1.38
13080
500-2500
/2
13049
60-330
45-250
49
683
1.50
13082
500-3000
/4
13050
80-400
60-300
49
683
2.09
13083
700-3500
60
3
60
1
100
3
100
1
200
1
300
1
330
1
400
3
Range
Length
Weight
mm
Kg
Part No
Range
lbf.in
All other features as table on the left.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
19
Professional Torque
Wrench
Torque Handles
Norbar Torque Handles are based on the ‘Professional’
wrench range and share the same high precision
engineering.
Two end fitting styles are catered for: 16mm diameter
spigot type and the 9 x 12mm and 14 x 18mm
rectangular type.
For many applications a spanner end fitting rather than a
socket is the best or, often, the only solution. Typically
this will be because the joint is a pipe union (such
as a brake pipe).
Adjustable - 16mm Spigot
13018
13019
13020
N.m
8-60
20-100
40-200
lbf.ft
5-45
15-80
30-150
Length
mm
301
340
423
13021
60-300
45-220
548
Model
Part No
60 TH
100 TH
200 TH
300 TH
Range
Weight
Kg
0.55
0.6
0.78
1.13
Female Ended Adjustable - 9x12mm and 14x18mm
Model
Part No
Range
Length
Weight
60 TH
100 TH
200 TH
9x12
13022
13023
13024
14x18
13025
N.m
8-60
20-100
40-200
lbf.ft
5-45
15-80
30-150
mm
300
340
421/431
Kg
0.55
0.6
0.78
300 TH
-
13026
60-300
45-220
546.5
1.13
400 TH
-
13028
80-400
60-300
658
1.78
Production ‘P’ Type - 16mm Spigot
N.m
lbf.ft
Length
mm
Weight
Kg
11167
8-60
5-45
280
0.55
100 THP
200 THP
11143
11144
20-100
40-200
15-80
30-150
320
402
0.6
0.78
300 THP
11117
60-300
45-220
640
1.13
Model
Part No
60 THP
Range
Female Ended Production ‘P’ Type
9x12mm and 14x18mm
Length
Weight
60 THP
100 THP
200 THP
9x12
11170
11150
11151
14x18
11152
N.m
8-60
20-100
40-200
lbf.ft
5-45
15-80
30-150
mm
280
319
400/410
Kg
0.55
0.6
0.78
300 THP
-
11153
60-300
45-220
528
1.13
400 THP
-
13068
80-400
60-300
640
1.75
Model
20
Part No
Range
Available End Fittings - See Pages 28 and 29
‘P’ Type wrenches have
no scale. They must be
set against a torque
testing device such as
Norbar’s Professional
Torque Tester
(see page 74)
Professional Torque
Wrench
Production ‘P’ Type
‘P’ Type wrenches are designed for the production environment
here they will be set and then dedicated to a particular
application. There is no scale, the wrench must be set against a
torque testing device such as Norbar’s Professional Torque Tester (see
page 74).
End cap kit
and locking
tool
Part No.
11698
‘P’ Type wrenches are available with two ratchet types – ‘Industrial’ and
‘Automotive’ (see explanation on pages 18 and 19) and as ‘Torque Handles’
for interchangeable end fittings.
Ratchet Torque Wrench Production ‘P’ Type - Automotive Ratchet
in
N.m
lbf.ft
mm
Engagements
per
Revolution
/8
8-60
5-45
31
72
286
0.6
/2
8-60
5-45
31
72
286
0.6
/8
20-100
15-80
31
72
326
0.69
/2
20-100
15-80
31
72
326
0.69
/2
40-200
30-150
41
72
423
1.0
Square Drive
Model
Part
No
60 “P”
11164
3
60 ‘P’
11171
1
100 ‘P’
11138
3
100 ‘P’
13039
1
200 ‘P’
13040
1
Range
Ratchet Diameter
Length
Weight
mm
Kg
Ratchet Torque Wrench Production ‘P’ Type - Industrial Ratchet
in
N.m
lbf.ft
mm
Engagements
per
Revolution
3
/8
8-60
5-45
35
72
291
0.62
13052
1
/2
8-60
5-45
40
72
299
0.69
100 ‘P’
13053
3
/8
20-100
15-80
35
72
332
0.68
100 ‘P’
13054
1
/2
20-100
15-80
40
72
338
0.74
200 ‘P’
13055
1
/2
40-200
30-150
42
72
422
0.96
300 ‘P’
13057
1
/2
60-300
45-220
49
60
663
1.45
330 ‘P’
13056
3
/4
80-400
60-300
49
60
663
2.04
Model
Part
No
60 “P”
13051
60 ‘P’
Square Drive
Range
Ratchet Diameter
Length
Weight
mm
Kg
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
21
Professional Torque Wrench
Models 550 - 1500
• Accuracy of ±3% of reading.
• Traceable calibration certificate supplied.
• Non length dependent. Extension handle can be used to reduce operator effort
•
•
•
•
•
(handle supplied as standard with Model 800, 1000 and 1500).
Positive ‘click’ can be heard, seen and felt.
Low weight - Model 1000 just 5.8kg.
Long scale length in N.m and lbf.ft allows error free setting.
Fine 60 tooth ratchet allows the wrench to be used in confined areas.
Supplied in carry case for storage and protection.
Ratchet Adjustables - Automotive Ratchet
Extension
Handle Part
No. 14142 supplied as
standard with
models 800
to 1500
N.m
110-550
200-800
200-800
lbf.ft
80-400
150-600
150-600
Weight
Kg
4.0
5.2
5.2
/4
300-1000
220-750
5.8
1
/4
1
300-1000
500-1500
500-1500
220-750
370-1100
370-1100
5.8
6.7
6.7
Part No
550
800
800
14001
14015
14016
1000
14002
3
1000
1500
1500
14003
14004
14005
3
Range
60
60
mm
845
1035
Length
inc ext
handle
mm
1535
75
60
1035
1535
14002
75
60
1250
1750
14003
14004
14005
75
75
75
60
60
60
1250
1570
1570
1750
2070
2070
Part No
Ratchet
Diameter
550
800
14001
14015
mm
61
75
800
14016
1000
1000
1500
1500
Model
22
Square Drive
in
3
/4
3
/4
1
Model
Engagements
per
Revolution
Length
Professional Torque
Wrench
Torque Handles and Production
‘P’ Type Wrenches
End cap kit
and locking
tool
Part No.
14166
Adjustable Torque Handles
Model
Range
Length
Weight
lbf.ft
mm
Kg
110-550
80-400
790
3.6
110-550
80-400
780
3.6
Length
Weight
Part No
End Fitting
N.m
550 TH
14011
14 x 18mm
Female
550 TH
14012
22mm Male
Torque Handles Production ‘P’ Type
Model
Part No
End Fitting
550 THP
14013
550 THP
14014
Range
N.m
lbf.ft
mm
Kg
14 x 18mm
Female
110-550
80-400
790
3.6
22mm Male
110-550
80-400
780
3.6
Ratchet Torque Wrench Production ‘P’ Type
Model
Part No
Square
Drive
Ratchet
Diameter
Range
Engagements
per
Revolution
Length
Length
inc ext
handle
Weight
mm
mm
Kg
in
N.m
lbf.ft
mm
/4
110-550
80-400
61
60
845
-
4.0
/4
200-800
150-600
75
60
1035
1535
5.2
1
200-800
150-600
75
60
1035
1535
5.2
/4
300-1000
220-750
75
60
1250
1750
5.8
1
300-1000
220-750
75
60
1250
1750
5.8
/4
500-1500
370-1100
75
60
1570
2070
6.7
1
500-1500
370-1100
75
60
1570
2070
6.7
550“P”
14006
3
800 ‘P’
14017
3
800 ‘P’
14018
1000 ‘P’
14007
1000 ‘P’
14008
1500 ‘P’
14009
1500 ‘P’
14010
3
3
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
23
SlimlineTM Torque Wrench
Model SLO Fixed Head and Torque Handles
•
•
•
•
•
•
Accuracy exceeds all international standards.
Unmistakable signal when set torque is reached.
Traceable calibration certificate supplied to satisfy ISO 9000:2000 quality systems.
High quality 72 tooth ratchet allows use in confined spaces.
Fixed head version has a push through square for left and right handed torque tightening.
Moulded grip aids correct handle location and operator comfort.
For 1 - 20 N.m ratchet torque wrenches, see the TruTorque range on page 13.
Adjustable Wrenches - Fixed Head
Model
SLO Fixed
SLO Fixed
Part No
11035
11125
Square
Drive
in
3
/8
3
/8
Range
N.m
1-20
4-20
Length
Weight
mm
211
213
Kg
0.4
0.4
lbf.in
10-180
40-180
40-180
Length
mm
207
210
205
lbf.in
10-180
40-180
Adjustable Torque Handles
24
Model
Part No
End Fitting
SLO TH
SLO TH
SLO TH
11036
11126
11122
16mm Spigot
16mm Spigot
9x12mm Female
Range
N.m
1-20
4-20
4-20
Weight
Kg
0.4
0.4
0.4
SlimlineTM Torque
Wrench
Model SLO ‘P’ Type Wrenches
• Torque Handle versions are available for both 16mm spigot
and 9 x 12mm fittings.
• Production ‘P’ type versions are designed to discourage
unauthorised alteration.
• P’Type versions have no scale. These wrenches must be set against a
torque testing device such as Norbar’s Professional Torque Tester (see
page 74).
Available End Fittings
See Pages 28 and 29
Torque Handles Production ‘P’ Types
Model
Part No
End Fitting
SLO THP
11090
SLO THP
11088
16 mm Spigot
Range
Length
Weight
N.m
lbf.in
mm
Kg
16mm Spigot
1-20
10-180
207
0.4
9x12mm Female
1-20
10-180
203
0.4
9x12mm Female
Fixed Head
Ratchet Head
Ratchet and Fixed Head - Production ‘P’ Types
Model
Part No
Square
Drive
Ratchet
Diameter
in
N.m
lbf.in
mm
Engagements
per
Revolution
/4
1-20
10-180
29
72
218
0.4
/8
1-20
10-180
29
72
218
0.4
/8
1-20
10-180
-
-
211
0.4
SLO ‘P’
11085
1
SLO ‘P’
11086
3
SLO Fixed
11089
3
Range
Length
Weight
mm
Kg
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
25
Industrial Torque Wrench
Adjustable Models
Adjusting Scale
• Robust construction gives accurate results, to ±4%, even in arduous working conditions.
• Every wrench supplied with a calibration certificate to satisfy requirements of ISO
9000:2000.
• The large break angle improves accuracy by reducing the possibility of over torquing.
• Cam control of the mechanism gives a controlled break which will not throw the
operator off balance.
• Dual scaled, N.m and lbf.ft.
• Supplied in a carry case for storage and protection.
• If storage space is limited, for example in vehicle tool kits, models 4R to 5R can be supplied in two piece form
where the longer of the pieces is 900mm (see page 27).
• For 2000 N.m, see 6R Split Industrial on page 27
Carry
Case
Standard
(except 4
TH and 4
THP)
Ratchet Adjustables
Part No
/4“
1”
12001
12001.01
Range
N.m
lbf.ft
100-500
70-350
4R
12006
12006.01
150-700
100-500
4AR
12007
12007.01
200-800
150-600
5R
12009
12009.01
300-1000
200-750
5AR
12012
12012.01
700-1500
500-1000
Model
Ratchet
Diameter
Length
Weight
3AR
4R
mm
70
70
36
36
mm
910
1150
Kg
5.2
6.3
4AR
70
36
1250
6.4
5R
70
36
1475
7.3
5AR
70
36
1475
10.4
Model
3AR
26
3
Engagements
per
Revolution
Industrial
Torque Wrench
Torque Handles, Production ‘P’
Type and Split Models
• Robust construction gives accurate results, to ±4%, even in
arduous working conditions.
• Every adjustable wrench supplied with a calibration certificate to
Available End
Fittings
See Pages 28
and 29
satisfy requirements of ISO 9000:2000.
• The break angle improves accuracy by reducing the possibility of over
torquing.
• All models listed are also available as Production ‘P’ types with no setting
scale. These must be set against a torque testing device such as Norbar’s
Professional Torque Tester. See page 74.
• ‘P’Type Wrenches can be set by the factory or distributor on request. Part code SQ2222.
• Supplied in a carry case for storage and protection (except 4TH and 4THP).
Adjustable Torque Handles and Production ‘P’ Type Torque Handles
Range
Model
Part No
End Fitting
4 TH
4 THP
12003
12017
22mm Spigot
22mm Spigot
N.m
130-550
130-550
Length*
Weight
mm
935
835
Kg
4.6
4.6
lbf.ft
100-400
100-400
Ratchet Torque Wrench Production ‘P’ Type
Model
Part No
3AR
4R
5R
5AR
12015
12020
12023
12002
Square Drive
in
/4
3
/4
3
/4
3
/4
3
Range
N.m
110-550
150-700
300-1000
700-1500
lbf.ft
80-400
100-500
200-750
500-1000
Ratchet
Diameter
mm
70
70
70
70
Engagements
per
Revolution
36
36
36
36
Length
Weight
mm
810
1050
1385
1385
Kg
5.2
6.3
7.3
10.4
Ratchet Torque Wrench Split Adjustables
/4”
1”
N.m
lbf.ft
mm
12102
12101
-
12102.01
12101.01
12100
150-700
300-1000
900-2000
100-500
200-750
600-1500
70
70
70
36
36
36
Range
Model
3
4R
5R
6R
Ratchet
Diameter
Engagements
per
Revolution
Part No
Length
Weight
mm
Kg
1150
1475
1920
6.3
7.3
13
* Length with adjusting nut set to minimum torque
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
27
Torque Handle Fittings
Fittings for 16mm Spigot
A/F Size
(mm)
7
Ring Ends
Max
Part No.
Torque*
(N.m)
29881
25
Flare Ends
Max
Part No.
Torque*
(N.m)
29921
4
8
29842
13
29882
35
29922
7
9
29843
19
29883
45
29923
9
10
29844
25
29884
52
29924
12
11
12
13
14
15
16
17
18
19
20
21
22
23
29845
29846
29847
29848
29849
29850
29851
29876
29877
29852
29853
29854
29855
32
41
51
63
77
92
107
128
149
172
198
225
255
29885
29886
29887
29888
29889
29890
29891
29913
29914
29892
29893
29894
29895
73
89
107
128
150
175
201
230
261
294
330
330
330
29925
29926
29927
29928
29929
29930
29931
29953
29954
29932
29933
29934
29935
16
25
28
31
38
46
53
65
74
86
100
112
123
24
29856
287
29896
330
29936
143
25
26
27
30
32
Imperial
(in)
1
⁄4
5
⁄16
3
⁄8
29857
29858
29878
29861
29863
322
330
330
330
330
29897
29202.M26
29915
29202.M30
29202.M32
330
330
330
330
330
29955
29204.M30
29204.M32
150
200
200
29701
29702
29703
29704
29705
29706
29707
29708
29709
29710
29711
29712
29713
29714
29715
29716
29717
29718
7
13
21
32
48
67
90
118
150
187
230
281
330
330
330
330
330
330
29726
29727
29728
29729
29730
29731
29732
29733
29734
29735
29736
29737
29738
29739
29202.I18
29202.I19
29202.I20
29202.I21
25
35
42
73
115
170
226
260
305
330
330
330
330
330
330
330
330
330
29752
29753
29754
29755
29756
29757
29758
29759
29760
29761
29762
29763
29764
-
7
9
15
23
32
44
58
74
93
114
140
166
166
-
7
⁄16
1
2
9
16
5
8
11
16
3
4
13
16
7
⁄8
15
16
⁄
⁄
⁄
⁄
⁄
⁄
⁄
1
1 1⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 5⁄16
28
Open Ends
Max
Part No.
Torque*
(N.m)
29841
9
* Max torque values are proof torques quoted in BS 192:1982 & BS 3555:1988 (tested on hardened hexagon test stud)
Where the distance between centres
differs from 1.25 in (31.8mm) the
torque applied will not be as set on the
wrench (see page 10).
Torque Handle Fittings
Torque Handle Fittings
Fittings for 16mm Spigot
Fittings for 22mm Spigot
Spanner End Fittings
Square Drive
Part No
29828
29827
Diameter
in
3
/8
1
/2
mm
19
25
Diameter
No.
Teeth
Ratchet Type
36
72
72
72
Push Through
Reversible
Push Through
Reversible
A/F Size (mm)
in
0.75
1.0
22
24
27
30
32
36
41
46
Imperial (in)
11⁄8
13⁄16
11⁄4
15⁄16
17⁄16
11⁄2
Ratchet Heads
Square
Drive
in
3
/8
3
/8
1
/2
1
/2
Part No
29826
29829
29825
29830
mm
34
30.5
40
40
in
1.3
1.2
1.6
1.6
Open End Part
No
29963.22
29963.24
29963.27
29963.3
29963.32
29963.36
29963.41
29963.46
Ring End Part No
29960.22
29960.24
29960.27
29960.3
29960.32
29960.36
29960.41
29960.46
29964.23
29964.24
29962.18
29962.19
29962.2
29962.21
29962.23
-
Accessories
Accessories
Part No
Description
Part No
Description
29832
Blank End Fitting for In-line Open End
85242
11343
72000
Blank End Fitting for Open End
Blank End Fitting for Ring End
Spigot Adaptor 16mm to 22mm
29969
29972
85719
85720
3⁄4” Fixed Head
3⁄4” Ratchet
Blank End Fitting for Open End
Blank End Fitting for Ring End
2
83
t
Par
9
o2
43
13
N
t
Par
1
No
t
Par
42
52
t
Par
8
No
9
96
Pa
o
rt N
9
o2
N
t
Par
0
00
72
72
99
2
No
19
57
t
Par
8
No
o
rt N
0
72
85
Pa
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
29
Handtorque
Multipliers
M
H 3 orque Multiplier
• 5:1 torque multiplication, accuracy guaranteed better
than ±4%.
.m
0N
30
31
• Supplied with two reaction bar styles for maximum
HT
versatility.
• Robust construction means minimal maintenance and long life.
• Supplied in a carrying case, the Highwayman is ideal for inclusion in the
heavy vehicle tool kit.
• 1300 N.m version has a spare 3/4” output square included in the kit.
• Multiplier head only (no reaction bars or plastic box) also available. 1300
N.m version, part no. 17218. 2700 N.m version, part no. 17219.
Model
Part
No
Range
N.m
Ratio
lbf.ft
HT3 1300 N.m
17220 1300 960
Version Kit
HT3 2700 N.m
17221 2700 2000
Version Kit
Input
Square
in
/2
5:1
1
5:1
3
Output
Square
in
A
B
C
D
mm
mm
mm
mm
/4
108
126
210
180
3.8
1.3
1
108
128
210
186
3.8
1.3
3
/4
Tool
Reaction
Weight Weight
Kg
Kg
H 4 orque Multiplier
• True 15.5:1 or 26:1 torque multiplication, accuracy guaranteed better than ±4%.
• High ratios allow the use of a small torque wrench.
• Robust construction means minimal maintenance and long life.
• Supplied in carrying case with replacement square drive.
• Anti Wind-Up Ratchet (Anti Backlash) fitted to allow safer and more practical operation.
• Angle protractor for easy torque and angle tightening.
Model
HT4/15.5
HT4/26
Part
No
Range
N.m lbf.ft
17022 3000 2200
17021 4500 3300
Ratio
15.5:1
26:1
Input
Square
in
1
/2
1
/2
Output
Square
in
1
1
A
B
C
mm
108
108
mm
156
173
mm
450
450
Tool Reaction
Weight Weight
Kg
Kg
6.1
1.9
7.0
1.9
HT4/26
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
HandtorqueTM Multipliers
Handtorque TM HT-52 and HT-72 Series
•
•
•
•
•
•
•
Compact dimensions allow excellent access and easy, safe handling.
Guaranteed accuracy of better than ±4%.
Anti Wind-Up Ratchet available, for easier and safer operation.
HT-72 features a light weight aluminium reaction arm.
A variety of alternative reaction styles are available for maximum versatility.
Electronic torque transducers can be fitted to the HT-72 for precise torque monitoring. See page 89.
Available in a variety of ratios and output square drive sizes.
Model
Part
No
Range
Ratio
N.m
18087 1000
lbf.ft
740
4.5:1
HT-52/22
HT-52/22
HT-52/22
18051 1000
18052 1000
740
740
22:01
22:01
18083 1000
740
22:01
3
HT-52/22
18084 1000
740
22:01
HT-72/5
HT-72/5
HT-72/5
HT-72/25
18014 1000 740
18015 1500 1100
18017 2000 1450
5:01
5:01
5:01
1
18018 1000
740
25:01
1
HT-72/25
18019 2000
1450
25:01
1
HT-72/25
HT-72/25
18081 1000 740
18082 2000 1450
25:01
25:01
1
HT-52/4.5
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
HT-72/25
36
Input
in
⁄2
3
⁄8
1
⁄2
1
Output
Square
in
3
⁄4
3
⁄4
3
⁄4
A
B
C
D
Tool
mm
52
52
52
mm
115
139
139
mm
131
131
131
mm
150.3
175
175
Kg
1.02
1.4
1.4
Reaction
Weight
Kg
0.85
0.85
0.85
⁄4
52
150.1
131
186.3
1.6
0.85
⁄8
3
1
⁄2
3
⁄4
52
150.1
131
186.3
1.6
0.85
⁄2
⁄2
3
⁄4
3
⁄4
1
1
72
72
72
144
144
144
165
165
165
188
188
188
2.4
2.4
2.4
0.66
0.66
0.66
⁄2
3
⁄4
72
165
165
188
2.7
0.66
⁄2
1
72
165
165
188
2.7
0.66
⁄2
⁄2
3
⁄4
1
72
72
174
174
165
165
218
218
3
3
0.66
0.66
1
1
HT-52/22
HandtorqueTM
Multipliers
Small Diameter Series
Handtorque models HT30, 45 and 60 have all the features
of the Standard Series, but have a higher torque output for a
given gearbox diameter.
• Reduced diameter allows better access, particularly on
pipe flanges.
• Reaction taken from high strength spline.
• Reaction foot can slide on the spline to allow for sockets of various lengths (except
HT45).
• Anti Wind-Up Ratchet available on all models (except 5:1 ratios), allowing safer and more
practical operation.
• HT45 has integral angle protractor for easy torque and angle tightening.
Model
Part
No
Range
Ratio
Input
30-/5
30/15
18003
N.m
3000
lbf.ft
2200
5:01
3
18004
3000
2200
15:01
1
30/25
18006
3000
2200
25:01
1
45/26
18037
4500
3300
26:01
1
60/25
18008
6000
4400
25:01
1
60/125
18012
6000
4400
125:01
1
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
in
/4
Output
Square
in
1
mm
140
D
Max
mm mm
224.2 252.4
Tool
Weight
Kg
5
Reaction
Weight
Kg
2
A
B
C
mm
108
mm
192
D
/2
1
108
210.9
140
243.2 271.4
7
2
/2
1
108
210.9
140
243.2 241.4
7
2
/2
1
108*
228
174
-
322
8.7
4
/2
11/2
119
256
174
311.5
337
10.6
4
/2
11/2
119
284.7
174
340.5
366
12.1
4
Alternative 350mm
long, straight reaction
plate; may be modified
by customer to suit
their applications.
HT30 Part No. 16686
HT45 and HT60 Part
No. 16687
HT60/25
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
37
HandtorqueTM Multipliers
Standard Series Models to 3400 N.m
•
•
•
•
•
True torque multiplication guaranteed better than ±4%.
High ratios allow the use of a small torque wrench, multipliers can be used where access is limited.
Anti Wind-Up Ratchet available on models of 25:1 ratio.
Other reaction styles can be designed to suit specific applications.
Electronic torque transducers can be fitted for precise torque monitoring. See page 89.
Model
1
2/5
2/25
Fitted with AWUR
5/5
5/25
Fitted with AWUR
6/5
6/25
Fitted with AWUR
Part
No
Range
N.m lbf.ft
16010 1700 1250
16012 1700 1250
Ratio
5:01
5:01
Input
Square
in
1
⁄2
3
⁄4
Output
Square
in
3
⁄4
1
A
B
mm
106
126
C
Min
mm
83
83
C
Max
mm
217
217
Tool
Weight
Kg
3
3
Reaction
Weight
Kg
2.2
2.2
mm
108
108
⁄2
1
108
141.5
83
217
5.6
2.2
⁄4
1
119
142.1
86
264
4.7
2.5
⁄2
1
119
167.6
86
264
7.5
2.5
⁄4
11⁄2
119
144.7
86
264
4.7
2.5
⁄2
11⁄2
119
172
86
264
7.5
2.5
16089 1700
1250
25:01:00
1
16014 3400
2500
5:01
3
16090 3400
2500
25:01:00
1
16016 3400
2500
5:01
3
16092 3400
2500
25:01:00
1
HT-5/25
HT-2/5
38
HandtorqueTM Multipliers
Standard Series Models to
47,500 N.m
• True torque multiplication guaranteed better than ±4%.
• High ratios allow the use of a small torque wrench,
multipliers can be used where access is limited.
• Anti Wind-Up Ratchet available on models of 25:1 ratio and above.
• Electronic torque transducers can be fitted for precise torque monitoring.
See page 89.
• Other models available up to 300,000 N.m.
HT13/125
HT9/125
Model
Part
No
Range
Ratio
Input
Square
in
3
/4
Output
Square
in
1 1/2
A
B
mm
174.8
C
Min
mm
146
C
Max
mm
333
Tool
Weight
Kg
8.1
Reaction
Weight
Kg
6.3
mm
144
/2
1 1/2
144
201.1
146
333
10.7
6.3
/2
1 1/2
130
201.1
163.4
337
10.6
4.9
/2
1 1/2
144
226
146
333
12.2
6.3
/2
1 1/2
130
226
163.4
337
12.1
4.9
/4
1 1/2
184
200.1
171
351
17.4
8.3
/2
1 1/2
184
220.1
171
351
18.9
8.3
/4
2 1/2
212
265.6
-
500
30.1
13.3
/2
2 1/2
212
293.4
-
500
32.1
13.3
/4
2 1/2
240
337
-
-
41.5
6.5
/4
2 1/2
315
379
-
-
95.2
6.9
7/5
7/25
16067
N.m
6000
lbf.ft
4500
5:01
16065
6000
4500
25:01
1
7/25 Sm. Dia.
16095
6000
4500
25:01
1
7/125
16068
6000
4500
125:01
1
7/125 Sm. Dia.
16096
6000
4500
125:01
1
9/25
16070
9500
7000
25:01
3
9/125
16071
9500
7000
125:01
1
11/25
11/125
16082
20000
14700
25:01
3
16049
20000
14700
125:01
1
12/87.5
18085
34,000
25000
87.5:1
3
13/125
16053
47500
35000
125:01
3
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
Fitted with AWUR
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
39
Pneutorque®
PTM-52 Series Stall Models
The PTM-52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact
52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts.
• Fast – 800 N.m version has a free speed of 175 rpm for rapid bolt run-down.
Model
Part No
PTM-52-500-F
PTM-52-500-B
PTM-52-800-F
PTM-52-800-B
18100.F06
18100.B06
18101.F06
18101.B06
* Speed at Maximum Air Pressure
•
•
•
•
•
•
•
Square
Drive
in
3
⁄4
3
⁄4
3
⁄4
3
⁄4
Direction of
Operation
Forward Only
Bi-directional
Forward Only
Bi-directional
Free
Speed*
N.m
lbf.ft
mm
100-500 74-370
245
100-500 74-370
245
160-800 118-590
175
160-800 118-590
175
Range
Tool
Weight
mm
3.8
4.1
3.8
4.1
Reaction
Weight
mm
0.85
0.85
0.85
0.85
Light weight – single direction stall tool weighs just 3.8 kg.
Quiet – less than 85 dB(A) when under load.
Non impacting – low vibration levels make these tools comfortable and safe to use.
Square drive is quickly and easily replaceable.
On Bi-directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the
gearbox.
‘Soft Start’ trigger control aids socket location and allows gradual and safe reaction location.
For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the
operator.
• 1” square drive available, Part No. 18545.
PTM-52-800-B
42
Length
‘A’
mm
284
333
284
333
Pneutorque®
PTM-52 Series Internal Control and
External Control Models
The integration of electronic torque measurement and control into the
PTM-52 Series is achieved with the minimum impact on overall tool
size and weight. The actual applied torque is accurately measured at the
output of the tool meaning that a repeatability of +/-2% can be guaranteed.
Shut-Off, Internal Control – these tools include a torque transducer, easy to read
LED display, control panel and a solenoid valve to shut off the air supply once the
desired torque has been reached. The tolerance band within which the bolt must be
tightened can be set on the tool handle control panel. When the tool is operated, the
actual applied torque is displayed along with one of three coloured LEDs to indicate a
low, within tolerance or high result. The tool can be operated in either N.m or lbf.ft.
Shut-Off, External Control – this version of the PTM-52 incorporates a transducer, solenoid
valve and three coloured LEDs for the indication of low, within tolerance or high results. However,
all control functions and torque display are housed in an external controller unit (purchased separately).
External controllers can give a much greater range of functionality than is possible on the ‘Internal Control’
version of the tool.
Tool controller in wall
box for external control
versions. Part No. 60244
without printer or 0254
with printer. Cable for
use with PTM tools, Part
No. 61127.600
PTM-52-800-B-IC
500 and 800 N.m Tools - Shut-Off, Internal
Model
Part No
PTM-52-500-B-IC
PTM-52-800-B-IC
18110.B06
18111.B06
* Speed at Maximum Air Pressure
Square
Drive
in
3
⁄4
3
⁄4
Direction of
Operation
Bi-directional
Bi-directional
Free
Speed*
N.m
lbf.ft
mm
100-500 74-370
245
160-800 118-590
175
Range
Length
‘A’
mm
397
397
Tool
Weight
mm
4.9
4.9
Reaction
Weight
mm
0.85
0.85
Length
‘A’
mm
397
397
Tool
Weight
mm
4.9
4.9
Reaction
Weight
mm
0.85
0.85
500 and 800 N.m Tools - Shut-Off, External
Model
Part No
PTM-52-500-B-EC
PTM-52-800-B-EC
18120.B06
18121.B06
* Speed at Maximum Air Pressure
Square
Drive
in
3
⁄4
3
⁄4
Direction of
Operation
Bi-directional
Bi-directional
Free
Speed*
N.m
lbf.ft
mm
100-500 74-370
245
160-800 118-590
175
Range
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
43
Pneutorque®
PTM-72 Series Stall Models
PTM-72 tools use the same ‘twin motor’ handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque
outputs. The ‘twin motor’ concept gives the benefit of high run-down speeds while adding very little to the size and weight of the
tool.
• Fast - 1000 N.m version has a free speed of 140 rpm for rapid bolt run-down.
Model
Part No
PTM-72-1000-F
PTM-72-1000-B
PTM-72-1350-F
PTM-72-1350-B
PTM-72-2000-F
PTM-72-2000-B
18102.F06
18102.B06
18103.F08
18103.B08
18104.F08
18104.B08
Square
Drive
in
3
⁄4
3
⁄4
1
1
1
1
Direction of
Operation
Forward Only
Bi-directional
Forward Only
Bi-directional
Forward Only
Bi-directional
Range
N.m
200-1000
200-1000
270-1350
270-1350
400-2000
400-2000
lbf.ft
147-738
147-738
200-1000
200-1000
295-1475
295-1475
Free
Speed*
mm
140
140
105
105
70
70
Length
‘A’
mm
316
365
316
365
349
398
Tool
Weight
mm
5.8
6.1
5.8
6.1
6.2
6.5
Reaction
Weight
mm
0.7
0.7
0.7
0.7
0.7
0.7
* Speed at Maximum Air Pressure
•
•
•
•
•
•
•
Light weight - single direction 2000 N.m stall tool weighs just 6.2 kg.
Quiet - less than 85 db(A) when under load.
Non impacting - low vibration levels make these tools comfortable and safe to use.
Square drive is quickly and easily replaceable.
On bi-directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the
gearbox.
‘Soft Start’ trigger control aids socket location and allows gradual and safe reaction location.
For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the
operator.
• 1” square drive available for the 1000 N.m version, Part No. 18492.
PTM-72-1000-B
44
Pneutorque®
PTM-72 Series Internal Control and
External Control Models
The integration of electronic torque measurement and control into the
PTM-72 Series is achieved with the minimum impact on overall tool
size and weight. The actual applied torque is accurately measured at the
output of the tool meaning that a repeatability of +/-2% can be guaranteed.
Shut-Off, Internal Control – these tools include a torque transducer, easy to read
LED display, control panel and a solenoid valve to shut off the air supply once the
desired torque has been reached. The tolerance band within which the bolt must be
tightened can be set on the tool handle control panel. When the tool is operated, the
actual applied torque is displayed along with one of three coloured LEDs to indicate a
low, within tolerance or high result. The tool can be operated in either N.m or lbf.ft
Shut-Off, External Control – this version of the PTM-72 incorporates a transducer, solenoid
valve and three coloured LEDs for the indication of low, within tolerance or high results. However, all
control functions and torque display are housed in an external controller unit (purchased separately), see
page 43 for details. External controllers can give a much greater range of functionality than is possible on
the ‘Internal Control’ version of the tool.
PTM-72-2000-B-EC
1000, 1350 and 2000 N.m Tools - Shut-Off, Internal
Model
Part No
PTM-72-1000-B-IC 18112.B06
PTM-72-1350-B-IC 18113.B08
PTM-72-2000-B-IC 18114.B08
Square
Drive
in
3
⁄4
1
1
Direction of
Operation
Bi-directional
Bi-directional
Bi-directional
Free
Speed*
N.m
lbf.ft
mm
200-1000 147-738
140
270-1350 200-1000
105
400-2000 295-1475
70
Range
Length
‘A’
mm
422
422
453
Tool
Weight
mm
7.4
7.4
7.8
Reaction
Weight
mm
0.7
0.7
0.7
Length
‘A’
mm
422
422
453
Tool
Weight
mm
7.4
7.4
7.8
Reaction
Weight
mm
0.7
0.7
0.7
* Speed at Maximum Air Pressure
1000, 1350 and 2000 N.m Tools - Shut-Off, External
Model
Part No
PTM-72-1000-B-EC 18122.B06
PTM-72-1350-B-EC 18123.B08
PTM-72-2000-B-EC 18124.B08
Square
Drive
in
3
⁄4
1
1
Direction of
Operation
Bi-directional
Bi-directional
Bi-directional
Range
N.m
lbf.ft
200-1000 147-738
270-1350 200-1000
400-2000 295-1475
Free
Speed*
mm
140
105
70
* Speed at Maximum Air Pressure
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
45
Pneutorque®
PTME-72 Series Stall Models
The PTME-72 series of tools was designed to meet the needs of the commercial vehicle wheel market.
The integrated reaction foot is designed specifically to reach recessed wheel bolts and the 72mm diameter gearbox is selected
to cope with the high frequency of use demanded by busy tyre shops.
Model
Part No
PTME-72-1000-F
PTME-72-1000-B
PTME-72-1000-B
PTME-72-2000-F
PTME-72-2000-B
PTM-72-2000-B
18140.F06
18140.B06
18149.B08
18141.F08
18141.B08
18104.B08
Square
Drive
in
3
⁄4
3
⁄4
1
1
1
1
Direction of
Operation
Forward only
Bi-directional
Bi-directional
Forward only
Bi-directional
Bi-directional
Free
Speed*
N.m
lbf.ft
mm
200-1000 147-738
140
200-1000 147-738
140
200-1000 147-738
140
400-2000 295-1475
70
400-2000 295-1475
70
400-2000 295-1475
70
Range
Length
‘A’
mm
378.9
428.4
434.6
437.2
486.9
398
Tool
Weight
mm
6.9
7.2
7.2
7.4
7.7
6.5
Reaction
Weight
mm
n/a
n/a
n/a
n/a
n/a
0.7
* Speed at Maximum Air Pressure
•
•
•
•
•
•
•
•
Fast - 1000 N.m version has a free speed of 140 rpm for rapid bolt run-down time.
Light weight, for ease of handling.
Quiet - less than 85 db(A) when under load.
Non-impacting - low vibration levels make these tools comfortable and safe to use.
Square drive is quickly and easily replaceable.
On bi-directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the
gearbox.
‘Soft Start’ trigger control aids socket location and allows gradual and safe reaction location.
For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the
operator.
• Internal and External Control models also available. 1” square drive available for the 1000 N.m
version, Part No. 18492.
PTME-72-1000-B
46
Pneutorque®
TrukTorqueTM Stall Models
The TrukTorqueTM pneumatic torque multiplier features a special
curved reaction arm designed to handle bolt tightening on the front and
rear wheels of trucks and buses. The design easily accommodates wheel
trims and deeply recessed wheel bolts.
TrukTorqueTM has none of the noise and vibration problems associated
with impact wrenches and can provide accurate torque control without the need
to check every wheel bolt with a manual torque wrench.
• Maximum torque of 1000 N.m (738 lbf.ft) covers all truck and buses.
• Free running speed of 140 rpm for rapid bolt rundown.
• The reaction socket is spring loaded to locate on the next available nut for safe and
secure reaction.
• Robust and lightweight. TrukTorqueTM is lighter than comparable impact wrenches.
• Compatible with most trucks and bus wheels.
TrukTorqueTM
Application Guide
Wheel Stud
PCD
335 mm
285.75 mm
285 mm
275 mm
225 mm
Number of
Studs
10
10
8
8
10
Nut A/F
30 - 33mm
30 - 33mm
30 - 33mm
30 - 33mm
30 - 33mm
TrukTorqueTM
Model
Part No
TrukTorqueTM
TrukTorqueTM
18162.B06
18162.B08
Square
Drive
in
3
⁄4
1
Direction of
Operation
Bi-directional
Bi-directional
Range
N.m
200-1000
200-1000
lbf.ft
147-738
147-738
Free
Speed*
mm
140
140
Length
‘A’
mm
474.9
483
Tool
Weight
mm
9.4
9.4
Reaction
Weight
mm
n/a
n/a
* Speed at Maximum Air Pressure
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
47
Pneutorque®
PTM-92 and PTM-119 Series Stall Models
The latest extension to the PTM tool range brings the speed advantage of the twin motor handle to higher capacity
Pneutorque models.
Coupled with new gearbox designs, these new models deliver an ideal balance between robustness, speed and weight.
• Fast - 2700 N.m version has a free speed of 57 rpm for rapid bolt run-down time.
• Light weight - PTM-92-2700 weighs just 8.5kg. All models are fitted as standard with a light but robust aluminium reaction
plate.
PTM-92-2700-B
Square
Part No. Drive
in
18106.B08
1
N.m
540-2700
PTM-92-3500-B
18107.B08
1
1 ⁄2
11⁄2
Model
PTM-119-4500-B 18108.B12
PTM-119-6000-B 18109.B12
* Speed at Maximum Air Pressure
•
•
•
•
•
•
•
1
Length
‘A’
mm
387
B
C
D
lbf.ft
400-2000
Free
Speed*
rpm
57
mm
178
mm
243
mm
205
Tool Reaction
Weight Weight
mm
kg
kg
92
8.5
1.35
700-3500
520-2600
41
387
178
243
205
92
8.5
1.35
900-4500
1200-6000
660-3300
885-4500
32
25
456
456
197
197
277
277
200
200
119
119
12.5
12.5
2.1
2.1
Range
Other reaction styles are available for maximum versatility.
Quiet - less than 85 db(A) when under load.
Non impacting - low vibration levels make these tools comfortable and safe to use.
Square drive is quickly and easily replaceable.
Bi-directional. The direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
‘Soft Start’ trigger control aids socket location and allows gradual and safe reaction location.
For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the
operator.
PTM-92-3500
48
E
Pneutorque®
72mm Series Single Speed and
Automatic Two Speed Models
•
•
•
•
•
•
•
•
72mm gearbox diameter allows excellent access.
Powerful – up to 2000 N.m output.
Switchable forward and reverse operation.
Quiet – less than 81dB(A), and non impacting for low operator fatigue.
‘Soft Start’ trigger control aids socket location and allows gradual and safe reaction
take up.
For safety, gearbox can turn independently from the handle. Torque reaction is never
transmitted back to the operator.
All torques can be achieved at less than 6 bar (90 psi).
Automatic Two Speed models offer all of the advantages of the single speed
versions but with the additional benefit of a run down speed five times greater than
the final torque speed of the tool.
PT 72/500
72mm Series, Single Speed
Model
Part No.
PT 72/500
PT 72/1000
PT 72/1000
PT 72/1500
PT 72/2000
18023
18022
18026
18021
18033
Square
Drive
in
3
⁄4
3
⁄4
1
1
1
Free
Speed*
N.m
lbf.ft
rpm
90-500
66-370
35
190-1000 140-740
15
190-1000 140-740
15
300-1500 220-1110
9
400-2000 300-1450
6
Range
A
B
C
mm
72
72
72
72
72
mm
301
301
301
301
301
mm
223
223
223
223
223
Tool
Weight
kg
6.4
6.4
6.4
6.4
6.4
Reaction
Weight
kg
1.7
1.7
1.7
1.7
1.7
* Speed at Maximum Air Pressure
72mm Series, Automatic Two Speed
Model
PT 72/500 AUT
PT 72/1000 AUT
PT 72/1000 AUT
PT 72/1500 AUT
PT 72/2000 AUT
Part No.
18023.AUT
18022.AUT
18026.AUT
18021.AUT
18033.AUT
Square
Drive
in
3
⁄4
3
⁄4
1
1
1
Range
N.m
203-500
488-1000
488-1000
760-1500
1000-2000
lbf.ft
150-370
360-740
360-740
560-1110
750-1450
Free
Tool Reaction
A
B
C
Speed*
Weight Weight
rpm
mm mm mm
kg
kg
170
72 373 223
8.7
1.7
75
72 373 223
8.7
1.7
75
72 373 223
8.7
1.7
45
72 373 223
8.7
1.7
30
72 373 223
8.7
1.7
* Speed at Maximum Air Pressure
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
49
Pneutorque®
Small Diameter Series Single Speed Models
These Pneutorque models share the same features as the ‘Standard’ Series, but have a higher torque output for a given gearbox
diameter.
• Reduced diameter allows improved access.
• High torque output – up to 5500 N.m.
• Reversible – Pneutorques can be used for tightening and untightening.
• Reaction foot can slide on the spline to allow for sockets of various lengths (except PT4500).
• Electronic torque transducers can be fitted for precise torque monitoring.
• PT4500 has integral angle protractor for easy torque and angle tightening.
• PT4500 employs a pistol grip style motor to the operator.
PT 2700
18027
Square
Drive
in
1
PT 4500
PT 5500
18038
18028
1
1 1/2
Model
Part No.
Length
‘A’
mm
108
B
C
lbf.ft
650-2000
Free
Speed*
rpm
5
mm
437
mm
140
D
D
Tool Reaction
Min Max Weight Weight
mm mm
kg
kg
469 498
14.5
2
660-3300
885-4000
4
2.5
108†
119
390
512
175
154
566
Range
N.m
880-2700
900-4500
1200-5500
* Speed at Maximum Air Pressure †Maximum Width 140 mm
PT4500
PT5500
Alternative 350mm long,
straight reaction plate; may
be modified by customer to
suit their applications.
PT2700 Part No. 16686
PT4500 and PT5500 Part
No. 16687
50
484
592
13.7
17.9
4
4
Pneutorque®
Small Diameter Series Two Speed
Models
• Two Speed Models offer all of the advantages of single speed
•
•
•
•
•
•
•
versions but with the additional benefit of a run down speed five
times greater than the final torque speed.
Reduced diameter allows improved access.
High torque output – up to 5500 N.m.
Reversible – Pneutorques can be used for tightening and untightening.
Reaction foot can slide on the spline to allow for sockets of various lengths (except
PT4500).
Electronic torque transducers can be fitted for precise torque monitoring.
PT4500 has integral angle protractor for easy torque and angle tightening.
PT4500 employs a pistol grip style motor.
Manual 2 Speed
PT5500AUT
Small Diameter Series, Manual Two Speed
Model
PT 2700 MTS
PT 5500 MTS
Part No.
18027.MTS
18028.MTS
* Speed at Maximum Air Pressure
Square
Drive
in
1
11⁄2
Range
N.m
880-2700
1200-5500
lbf.ft
650-2000
885-4000
Free
Speed*
rpm
25
12.5
A
B
C
mm
108
119
mm
524
598
mm
140
154
A
B
C
mm
108
108 †
119
mm
506
462
581
mm
140
175
154
D
D
Min Max
mm mm
556 585
652 678
Tool
Weight
kg
18
21.4
Reaction
Weight
kg
2
4
D
D
Min Max
mm mm
538 567
556
635 661
Tool
Weight
kg
18
16
21.4
Reaction
Weight
kg
2
4
4
Small Diameter Series, Automatic Two Speed
Model
PT 2700 AUT
PT 4500 AUT
PT 5500 AUT
Part No.
18027.AUT
18038.AUT
18028.AUT
Square
Drive
in
1
1
11⁄2
Free
Speed*
N.m
lbf.ft
rpm
880-2700 650-2000
25
2400-4500 1750-3300
13.5
1762-5500 1300-4000
12.5
Range
* Speed at Maximum Air Pressure † Maximum Width 140 mm
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
51
Pneutorque®
Standard Series Models to 3400 N.m - Single Speed
Based on the original Pneutorque, the ‘Standard Series’ Range is a direct result of over 40 years of refinement and development
necessary to keep pace with industry’s requirements today.
In use on many thousands of applications worldwide, Pneutorque Wrenches continue to represent the foundation of Norbar’s
powered tool range.
• Models available for almost every bolting application.
• Forward and reverse operation.
• Low operator fatigue – quiet, non impacting or pulsing.
• Repeatability of ±5%.
• Other reaction styles can be designed to suit specific applications.
• Electronic torque transducers can be fitted for precise torque monitoring.
Model
PT 1
PT 1
PT 1A
PT 2
PT 5
PT 6
Part No.
16031
16011
16097
16013
16015
16017
* Speed at Maximum Air Pressure
Square
Drive
in
3
⁄4
1
1
1
1
11⁄2
Range
N.m
160-680
160-680
270-1200
515-1700
880-3400
880-3400
lbf.ft
120-500
120-500
200-900
380-1250
650-2500
650-2500
Free
Speed*
rpm
30
30
15
9
5
5
Length
‘A’
mm
108
108
108
108
119
119
B
mm
368
373
373
373
424
430
C
C
Tool Reaction
Min Max Weight Weight
mm mm
kg
kg
83 217
10.6
2.2
83 217
10.6
2.2
83 217
11.1
2.2
83 217
11.1
2.2
83 264
14
2.5
83 264
14
2.5
PT5
PT2
52
Pneutorque®
Standard Series Models to 3400 N.m
Two Speed
Two Speed models offer all of the advantages of single speed versions
but with the additional benefit of a run down speed five times greater
than the final torque speed.
• Models available for almost every bolting application.
• Forward and reverse operation.
• Low operator fatigue – quiet, no impacting or pulsing.
• Repeatability of ±5%.
• Other reaction styles can be designed to suit specific applications.
• Electronic torque transducers can be fitted for
precise torque monitoring.
PT5 AUT
PT2 MTS
Standard Series to 3400 N.m, Manual Two Speed
PT5500AUT
Model
Part No.
PT 1 MTS
PT 1 MTS
PT 1A MTS
PT 2 MTS
PT 5 MTS
PT 6 MTS
16031.MTS
16011.MTS
16097.MTS
16013.MTS
16015.MTS
16017.MTS
Square
Drive
in
3
⁄4
1
1
1
1
11⁄2
Range
N.m
160-680
160-680
270-1200
515-1700
880-3400
880-3400
lbf.ft
120-500
120-500
200-900
380-1250
650-2500
650-2500
Free
Speed*
rpm
150
150
75
45
25
25
A
B
mm
108
108
108
108
119
119
mm
454
459
459
459
510
516
C
C
Min Max
mm mm
83 217
83 217
83 217
83 217
86 264
86 264
Tool
Weight
kg
14.1
14.1
14.6
14.6
17.5
17.5
Reaction
Weight
kg
2.2
2.2
2.2
2.2
2.5
2.5
Tool
Weight
kg
14.1
14.1
14.6
14.6
17.5
17.5
Reaction
Weight
kg
2.2
2.2
2.2
2.2
2.5
2.5
Standard Series to 3400 N.m, Automatic Two Speed
Model
PT 1 AUT
PT 1 AUT
PT 1A AUT
PT 2 AUT
PT 5 AUT
PT 6 AUT
Part No.
16031.AUT
16011.AUT
16097.AUT
16013.AUT
16015.AUT
16017.AUT
Square
Drive
in
3
⁄4
1
1
1
1
11⁄2
Range
N.m
160-680
160-680
270-1200
515-1700
880-3400
880-3400
lbf.ft
120-500
120-500
200-900
380-1250
650-2500
650-2500
Free
Speed*
rpm
150
150
75
45
25
25
A
B
mm
108
108
108
108
119
119
mm
437
442
442
442
493
499
C
C
Min Max
mm mm
83 217
83 217
83 217
83 217
86 264
86 264
* Speed at Maximum Air Pressure and in High Gear
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
53
Pneutorque®
Standard Series Models to 100,000 N.m - Single Speed
•
•
•
•
•
•
•
Model
PT 7
PT 9
PT 11
PT 12
PT 13
PT 14
Models available for almost every bolting application, up to 100,000 N.m.
Forward and reverse operation.
Low operator fatigue – quiet, no impacting or pulsing.
Repeatability of ±5%.
Other reaction styles can be designed to suit specific applications.
Electronic torque transducers can be fitted for precise torque monitoring. See page 89.
Models 13 and 14 supplied with blank reaction plate for fabrication to specific requirements.
Part
No.
16066
16072
16046
18086
16052
16045
Square
Range
Drive
in
N.m
lbf.ft
1
1 ⁄2
1762-6000
1300-4500
1
1 ⁄2
2710-9500
2000-7000
4400-20000
3250-14700
21⁄2
9500-34000
7000-25000
21⁄2
1
13550-47000 10000-35000
2 ⁄2
22375-100000 16500-73500
31⁄2
Free
Speed*
rpm
2.5
1.8
1.2
0.5
0.3
0.2
A
B
mm
144
184
212
240
315
315
mm
457
452
546.3
593
629
726
* Speed at Maximum Air Pressure
PT7
PT11
54
C
C Max
Min
mm
mm
146
333
169
351
500
Blank Plate
Blank Plate
Blank Plate
Tool Reaction
Weight Weight
kg
kg
19.7
6.3
24.4
8.3
38.6
13.3
49.8
6.5
102.2
6.9
119.4
10.4
Pneutorque®
Standard Series Models to 300,000 N.m,
Two Speed
PT13 and PT14
are supplied on a
trolley and
with a Lubro
Control Unit
Two Speed Models offer all of the advantages of single speed versions but
with the additional benefit of a run down speed five times greater than
the final torque speed.
• Models available for almost every bolting
and torque application, up to 300,000 N.m .
• Forward and reverse operation.
• Low operator fatigue – quiet, no impacting
or pulsing.
• Repeatability of ±5%.
• Other reaction styles can be designed to
suit specific applications.
PT7AUT
• Electronic torque transducers can be
fitted for precise torque monitoring. See
page 89.
• Models 13 and 14 supplied with blank
reaction plate for fabrication to specific
requirements.
PT14 MTS
Standard Series to 300,000 N.m, Manual Two Speed
PT 7 MTS
PT 9 MTS
PT 11 MTS
16066.MTS
16072.MTS
16046.MTS
Square
Drive
in
11⁄2
11⁄2
21⁄2
PT 12 MTS
18086.MTS
21⁄2
9500-34000
7000-25000
2.5
240
679
PT 13 MTS
16052.MTS
21⁄2
13550-47000
10000-35000
1.5
315
716
PT 14 MTS
16045.MTS
31⁄2
22375-100000
16500-73500
1
315
800
PT 18 MTS
16054.MTS
-
0.4
520
930
Model
Part No.
A
B
lbf.ft
1300-4500
2000-7000
3250-14700
Free
Speed*
rpm
12.5
9
6
mm
144
184
212
mm
543
538
632
Range
N.m
1762-6000
2710-9500
4400-20000
85000-300000 62500-220000
C
C
Min Max
mm mm
146 333
169 351
500
Blank
Plate
Blank
Plate
Blank
Plate
-
Tool
Weight
kg
23.2
27.9
42.1
Reaction
Weight
kg
6.3
8.3
13.3
53.3
6.5
105.7
6.9
122.9
10.4
380
-
* Speed at Maximum Air Pressure
(PT 18 part number does not include an output drive or reaction. These components will be engineered uniquely for each application.)
Standard Series to 100,000 N.m, Automatic Two Speed
Model
PT 7 AUT
PT 9 AUT
Part No.
16066.AUT
16072.AUT
Square
Drive
in
11⁄2
11⁄2
Range
N.m
1762-6000
2710-9500
lbf.ft
1300-4500
2000-7000
Free
Speed*
rpm
12.5
9
A
B
mm
144
184
mm
526
521
C
C
Min Max
mm mm
146 333
169 351
Tool
Weight
kg
23.2
27.9
Reaction
Weight
kg
6.3
8.3
* Speed at Maximum Air Pressure and in High Gear
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
55
Pneutorque®
Remote Control 72mm Series
Remote control versions have no direction/shut-off control on the tool but rely on external pneumatic circuitry to provide this
function.This opens up numerous application possibilities for the Pneutorque ranging from simple stall shut-off in a hazardous
working environment to sophisticated, multi-spindle torque and angle shut-off systems.
• Stall control gives repeatability of ±5% on a given joint.
• Torque transducers and angle encoders available for all models. These form the basis of sophisticated control systems
giving repeatability of up to ±2%. See page 89.
• Automatic Two Speed gearbox reduces run-down times.
• Each gearbox supplied with a standard reaction device or, on request, one specifically designed to suit the application.
Model
Part No.
Square
Drive
in
3
⁄4
N.m
90-500
Length
‘A’
mm
72
mm
290.2
Tool Reaction
Weight Weight
mm
kg
kg
111
6.4
1.7
B
C
PT 500
18031
PT 500 AUT
PT 1000
PT 1000 AUT
PT 1000
PT 1000 AUT
PT 1500
PT 1500 AUT
PT 2000
18031.AUT
18030
18030.AUT
18032
18032.AUT
18029
18029.AUT
18034
3
⁄4
⁄4
3
⁄4
1
1
1
1
1
203-500
190-1000
488-1000
190-1000
488-1000
300-1500
760-1500
400-2000
150-370
140-740
360-740
140-740
360-740
220-1110
560-1110
300-1450
170
15
75
15
75
9
45
6
72
72
72
72
72
72
72
72
362.2
290.2
362.2
290.2
362.2
290.2
362.2
290.2
111
111
111
111
111
111
111
111
8.7
6.4
8.7
6.4
8.7
6.4
8.7
6.4
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
PT 2000 AUT
18034.AUT
1
1000-2000
750-1450
30
72
362.2
111
8.7
1.7
3
* Speed at Maximum Air Pressure
PTM-92-3500
56
lbf.ft
66-370
Free
Speed*
rpm
35
Range
Pneutorque®
Remote Control Standard Series
All Standard and Small Diameter Series Pneutorques are available fitted
with the remote motor.
• Stall control gives repeatability of ±5% on a given joint.
• Torque transducers and angle encoders available for all models.
• These form the basis of sophisticated control systems giving
repeatability of up to ±2%. See page 89.
• Automatic Two Speed gearbox reduces run-down times.
• Each gearbox supplied with a standard reaction device or, on request, one
specifically designed to suit the application.
PT2 Remote
Model
PT 1
PT 1 AUT
PT 1
PT 1 AUT
PT 1A
PT 1A AUT
PT 2
PT 2 AUT
PT 5
PT 5 AUT
Part No.
16031.X
16031.XAUT
16011.X
16011.XAUT
16097.X
16097.XAUT
16013.X
16013.XAUT
16015.X
16015.XAUT
Square
Drive
in
3
⁄4
3
⁄4
1
1
1
1
1
1
1
1
Range
N.m
160-680
160-680
160-680
160-680
270-1200
270-1200
515-1700
515-1700
880-3400
880-3400
lbf.ft
120-500
120-500
120-500
120-500
200-900
200-900
380-1250
380-1250
650-2500
650-2500
Free
Speed*
rpm
30
150
30
150
15
75
9
45
5
25
A
B
mm
108
108
108
108
108
108
108
108
119
119
mm
292
361
298
366
298
366
298
366
348
417
C
C
Min Max
mm mm
83 217
83 217
83 217
83 217
83 217
83 217
83 217
83 217
86 264
86 264
Tool
Weight
kg
10.6
14.1
10.6
14.1
11.1
14.6
11.1
14.6
14
17.5
Reaction
Weight
kg
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.5
2.5
* Speed at maximum air pressure and in high gear where applicable.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
57
Valve Actuation
The combination of speed, lightness, low noise, reduced
vibration and torque control makes Pneutorque®
wrenches ideal for many non-bolting applications. Of
these applications, it is in the field of valve actuation
and valve grinding in the alumina refining industry that
Pneutorques® have so far had the biggest impact. Two speed
tools have proved the most popular as they provide rapid opening
and closing of the valve together with high torque for grinding the caustic
deposit that accumulates on the valve seat. However, it is not just in the alumina
refining industry that Pneutorques® are used for valve actuation. The actuation of water
valves and gas valves are now common applications.
CTM-72-1250
The CTM-72-1250 was developed for water valve actuation and has proved very effective in this field. The
photo to the right shows the unique reaction arm that was developed specifically for this application, which
is a great example of Norbar’s engineer-to-order service.
• Portable, battery powered
• Three speed operation
• Quiet - less than 70 dB(A) when under load
• Non-impacting - Low vibration levels make these tools comfortable and safe to use
• ‘Soft Start’ trigger control aids socket location and allows gradual and safe reaction location.
Model
CTM-72-1250
Operation
Direction
Square
Drive
in
Part No.
Bi-directional
1
18171.B08
Torque Range
N.m
lbf.ft
500 - 1250*
369-921
Free
Length
Speed †
rpm
mm
13
430
Tool
Reaction
Weight Weight
kg
kg
6.4
0.7
Battery
Volt
18
* Tool torque output can vary slightly from these nominal ratings. † Speed at maximum air pressure.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
59
NSD Series
Hydraulic Wrench
NHCL Series
Hydraulic Wrench
w w w. norba r.com
Norbar Torque Tools - Hydraulic Wrenches
NSD Series
NHC/L Series
Norbar square drive hydraulic ratchet wrenches offer a cost efficient option to handle a wide range of bolt tightening and
break-out needs. The NSD Series ratchet wrench employs a “patented design” which increases accuracy and reduces the
number of moving parts. Our robust and lightweight aluminum body completely encloses the drive train assembly keeping
the crucial lubricant inside the tool while significantly reducing the opportunity for outside elements to contaminate the
inside of the tool.
Norbar Inline hydraulic ratchet wrenches require minimum clearance while applying torque on the same plane as the nut,
providing a marked improvement over square drive socket wrenches. Our patented design breakthrough reduces the
overall dimensions of the inline ratcheting head allowing it to fit almost every application.
Hex Link - Tool Specifications
NHC
Series
Min/Max,
N.m
@10,000 p.s.i
(+\- 3%)
Length
(mm)
Height
(mm)
Body
Width
(mm)
Head
Width
(mm)
Range
(mm)
Weight
with
Head
(kg)
NHC-1800
159/1,754
159
102
28
24
19 - 51
3.29
NHC-4500
399/4,168
178
146
37
27* or 30†
32 - 75
4.20
NHC-9500
904/9,354
235
159
38
38
51 - 98
6.35
NHC-14000
1,342/13,423
248
203
50
50
60 - 108
11.11
NHC-23000
2,051/21,627
286
235
50
62
70 - 137
19.05
NHC-35000
3,064/32,024
286
235
74
75
89 - 146
25.85
NHC-65000
**
**
**
**
**
**
**
*32 to 51 Heads
†56 to 75 Heads §Steel Cylinders Only
**Please inquire for additional information.
Square Drive - Tool Specifications
NSD
Series
Square
Drive
(inches)
Min/Max,
N.m
@10,000 p.s.i
(+\- 3%)
NSD-1900
3/4
194/1,874
2.38
94
40
133
NSD-4500
1
355/3,960
5.10
136
47
NSD-8000
1-1/2
765/6,928
7.80
139
NSD-15000
1-1/2
1,407/14,633
13.56
NSD-27000
2-1/2
2,377/2,4315
NSD-40000
2-1/2
NSD-60000†
NSD-80000†
Reaction Length Length Length
Weight*
Area - RA
L1
L2
L3
(kg)
(mm)
(mm)
(mm)
(mm)
Radius
R
(mm)
Height
H1
(mm)
Height
H2
(mm)
Width
W1
(mm)
Width
W2
(mm)
Width
W3
(mm)
151
30
104
145
50
69
56
183
202
32
124
166
70
91
81
55
193
214
44
151
199
76
114
89
165
57
222
239
52
187
232
99
136
127
28.12
191
88
264
295
76
233
274
126
189
141
3,577/34,986
34.01
191
88
276
298
79
248
289
149
213
141
2-1/2
**
65.77
189
186
318
338
83
285
320
146
210
140
2-1/2
**
133.80
223
150
373
406
95
356
396
184
248
146
*Weight includes tool, reaction member and square drive.
**Please inquire for additional information.
†Steel Casting
NHL-1800 Heads
(mm)
NHL-4500 Heads
(mm)
NHL-9500 Heads
(mm)
NHL-14000 Heads
(mm)
NHL-23000 Heads
(mm)
NHL-35000 Heads
(mm)
NHL-65000 Heads
(mm)
ATF
Radius
P/R
ATF
Radius
P/R
ATF
Radius
P/R
ATF
Radius
P/R
ATF
Radius
P/R
ATF
Radius
P/R
ATF
Radius
P/R
19
27
10
32
35
9
51
46
12
60
51
11
70
64
23
86
74
24
115
100
33
27
30
9
37
37
9
56
48
12
65
55
12
75
67
23
95
81
26
125
105
33
32
33
9
41
40
9
60
51
12
70
61
14
76
69
25
105
85
25
135
110
33
37
36
9
46
43
10
65
55
12
75
65
13
86
74
25
115
91
25
145
116
32
36
38
9
48
45
12
70
61
14
76
67
16
95
81
26
125
98
25
155
121
32
46
41
9
51
45
10
75
65
13
86
72
24
105
85
26
135
104
26
165
127
32
51
44
9
56
48
10
76
67
16
95
78
24
115
91
26
145
110
28
175
133
32
105
83
24
125
99
26
185
138
32
135
104
26
60
50
10
86
72
16
65
54
12
95
77
16
70
57
12
75
60
12
For more information on torque and tension products, visit our website: www.norbar.com
Head Office - South Australia
45-47 Raglan Avenue, Edwardstown SA, 5039 Australia
Tel: +61 (0)8 8292 9777 Fax: +61 (0)8 8292 9799
Email: [email protected]
New South Wales
Western Australia
Unit 33/72 - 80 Percival Road
Smithfield NSW 2164
Tel: +61 (0)2 9725 2831
Fax: +61 (0)2 9604 0951
Email: [email protected]
Unit 3/95 Bannister Road
Canning Vale WA 6155
Tel: +61 (0)8 9455 7717
Fax: +61 (0)8 9455 7979
Email: [email protected]
Queensland
New Zealand
Unit 5/55 Donaldson Road
Rocklea QLD 4106
Tel: +61 (0)7 3216 7600
Fax: +61 (0)7 3216 6392
Email: [email protected]
65A O’Rorke Road
Penrose Auckland NZ
Tel: +64 (0)9 579 8653
Fax: +64 (0)9 579 8654
Email: [email protected]
Victoria
Unit 6/810 Princes Highway
Springvale VIC 3171
Tel: +61 (0)3 9562 3382
Fax: +61 (0)3 9562 3072
Email: [email protected]
South East Asia / Singapore
60 Kaki Bukit Place
#09-16 Eunos Tech-Pack
Singapore 415979
Tel: +65 6841 1371
Fax: +65 6841 1372
Email: [email protected]
www.norbar.com
Hydraulic orque Multipliers
Square rive (NS ) Series
Norbar square drive hydraulic ratchet wrenches offer a cost efficient option to handle a wide range of bolt tightening and break-out
needs. The NSD Series ratchet wrench employs a “patented design” which increases accuracy and reduces the number of moving
parts. Our robust and lightweight aluminum body completely encloses the drive train assembly keeping the crucial lubricant inside the
tool while significantly reducing the opportunity for outside elements to contaminate the inside of the tool.
Square Drive - Tool Specifications
Min/Max,
Min/Max,
Square
Reaction Length Length Length Radius Height Height Width Width Width
N.m
lbf.ft
Weight*
Drive
Area - RA L1
L2
L3
R
H1
H2
W1
W2
W3
@10,000 p.s.i @10,000 p.s.i (kg)
(in)
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
(+\- 3%)
(+\- 3%)
NSD-1900
194-1,874
143-1,382
2.38
94
40
133
151
30
104
145
50
69
56
NSD-4500
1
355-3,960
262-2,921
5.10
136
47
183
202
32
124
166
70
91
81
NSD-8000 1-1/2
765-6,928
564-5,110
7.80
139
55
193
214
44
151
199
76
114
89
NSD-15000 1-1/2 1,407-14,633 1,038-10,793 13.56
165
57
222
239
52
187
232
99
136
127
NSD-27000 2-1/2 2,377-24,315 1,753-17,934 28.12
191
88
264
295
76
233
274
126
189
141
NSD
Series
NSD-40000 2-1/2 3,577-34,986 2,638-25,804 34.01
191
88
276
298
79
248
289
149
NSD-60000† 2-1/2
**
**
65.77
189
186
318
338
83
285
320
146
NSD-80000† 2-1/2
**
**
133.80
223
150
373
406
95
356
396
184
*Weight includes tool, reaction member and square drive. †Steel Casting **Please inquire for additional information.
213
210
248
141
140
146
Hydraulic orque
Multipliers
Hydraulic ylinder/ ink (NH / ) Series
Norbar Inline hydraulic ratchet wrenches require minimum clearance
while applying torque on the same plane as the nut, providing a marked
improvement over square drive socket wrenches. Our patented design
breakthrough reduces the overall dimensions of the inline ratcheting head allowing it to
fit almost every application.
Norbar Hydraulic Cylinder/Link Tool Specifications
Min-Max, N.m
Min-Max, lbf.ft
Body
Head
Length
Height
@10,000 p.s.i (+\@10,000 p.s.i (+\Width
Width
(mm)
(mm)
3%)
3%)
(mm)
(mm)
NHC-1800
159-1,754
117-1,294
159
102
28
24
NHC-4500
399-4,168
294-3,074
178
146
37
27* or 30†
NHC-9500
904-9,354
667-6,899
235
159
38
38
NHC-14000
1,342-13,423
990-9,900
248
203
50
50
NHC-23000
2,051-21,627
1,513-15,951
286
235
50
62
NHC-35000
3,064-32,024
2,260-23,620
286
235
74
75
NHC-65000
4,711-60,720
3,475-44,785
**
**
**
**
*32 to 51 Heads
†56 to 75 Heads §Steel Cylinders Only **Please inquire for additional information.
NHC
Series
Range
(mm)
19 - 51
32 - 75
51 - 98
60 - 108
70 - 137
89 - 146
**
Weight
with Head
(kg)
3.29
4.20
6.35
11.11
19.05
25.85
**
Hex Link Specifications
NHL-1800 Heads
(mm)
ATF Radius
19
27
27
30
32
33
37
36
42
38
46
41
51
44
P/R
10
9
9
9
9
9
9
NHL-4500 Heads
(mm)
NHL-9500 Heads
(mm)
NHL-14000 Heads
(mm)
NHL-23000 Heads
(mm)
NHL-35000 Heads
(mm)
NHL-65000 Heads
(mm)
ATF Radius
32
35
37
37
41
40
46
43
48
45
51
45
56
48
60
50
65
54
70
57
75
60
ATF Radius
51
46
56
48
60
51
65
55
70
61
75
65
76
67
86
72
95
77
ATF Radius
60
51
65
55
70
61
75
65
76
67
86
72
95
78
105
83
ATF Radius
70
64
75
67
76
69
86
74
95
81
105
85
115
91
125
99
135
104
ATF Radius
86
74
95
81
105
85
115
91
125
98
135
104
145
110
ATF Radius
115
100
125
105
135
110
145
116
155
121
165
127
175
133
185
138
P/R
9
9
9
10
12
10
10
10
12
12
12
P/R
12
12
12
12
14
13
16
16
16
P/R
11
12
14
13
16
24
24
24
P/R
23
23
25
25
26
26
26
26
26
P/R
24
26
25
25
25
26
28
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
P/R
33
33
33
32
32
32
32
32
•
•
•
•
•
ir Powered onsoles
Air Motor, Air Control
Use where air is the preferred source of power
Powerful 3hp motor starts under load
External adjustable pressure regulator
Retract side internal relief valve protects tool
Use for double or single acting tools
Air Powered Console
Model Number
Oil Delivery per
Minute
NOR-SAHC
465 in³ @100psi
55 in³ @ 10,000psi
• 3hp, 50 cfm @ 80 psi
• Pneumatic remote control with 30-foot
cord
Oil Reservoir Usable Oil Overall Width Overall
Overall
Pump Weight
(Litre)
(inches3)
(cm)
Length (cm) Height (cm) w/ Oil (kg)
9.46
590
42
24.1
50.3
29.5
lectric Powered onsoles
These pumps have been continually upgraded over the last 40
years and some of the originals are still in service! Equipped with a
1-1/8 horse power, single phase, universal motor; they have a noise
level of 90-95 dBA. These power consoles offer the best weight to
performance ratio of any of our electric/hydraulic pumps. CSA rated
for intermittent duty.
•
•
•
•
•
•
Two-speed high performance pump
External adjustable pressure regulator
Retract side internal relief valve protects tool
Hand remote
Use for double or single acting tools
Remote control with 30-foot cord
Electric Powered
Console
Model Number
Oil Delivery per
Minute
NOR-SEHC
704 in³ @100psi
56 in³ @ 10,000psi
•
•
•
1-1/8 hp, 12000 rpm
Remote control with 30foot cord
115V, 25 amps
110V/50Hz, 25 amps
220V/50Hz, 13 amps
Oil Reservoir Usable Oil Overall Width Overall
Overall
Pump Weight
(Litre)
(inches3)
(cm)
Length (cm) Height (cm) w/ Oil (kg)
9.46
525
43.5
24.1
46
34.1
-H 230)
Hydraulic power unit engineered to continuously and reliably operate a
variety of hydraulically powered torque wrenches operating up to 700
bar / 10,150 psi.
This compact design utilises a finned housing with integral fan that
eliminates the need for an external cooler. Directly mounted pressure
Model Number
Motor
Voltage
Electricity
Power
NOR-HT230
230 V
50 Hz
1 Phase
1.5 KW
2Hp
NOR-HT230
•
Electric Control
lectric Powered onsole (N
Model Number
Electric Motor
and directional control valves eliminate additional plumbing and
potential leak points while keeping the unit compact.
This unit includes pendant control for manual advance and automatic
retract operation.
Maximum
Nameplate
Current
10.5 A
Maximum
Advance
Pressure
700 bar
10,150 psi
Pressure @15 Amp Motor
Current (with 80° F - 100° F Oil
Temp)
n/a
n/a
"Advance Flow Rate
"Advance Flow Rate
Noise
Reservoir
Unit Weight w/
(0-100 bar / 0-1500 (100-700 bar /1,500-10,1500
Usable Oil Level @
Capacity
Oil
psi )"
psi )"
300 bar
3
3
340 in /min
67 in /min
3.7 Litre 1.7 Litre 68–70 dB
34 kg
Retract
Pressure
120 bar
1.740 psi
Control
Pendant
Length
6 meter
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
Harsh nvironment ange (H )
Norbar has developed a range of measurement and calibration equipment that
has been tested to conform with EN 60529: 1992.
Rated to IP65/IP67 the products are aimed specifically for use in harsh
environments.
Particularly suited for use in the Offshore and Power Generation industries, the
combination of high quality components, sound design and many years field
experience allow calibration and control in previously restrictive areas.
The IP65/IP67 rating gives the product protection against dust ingression,
pressurised water jet and complete water immersion to a 1 metre depth for a
30 minute period.
Harsh Environment Instrument in water tight carry case.
The HE range provides a fully traceable system to National calibration
standards through Norbar’s own UKAS accredited laboratory.
Key features
•
•
•
•
•
•
•
•
•
•
H
IP65/67 rated.
Stainless steel transducer design with ‘SMART’ intelligence.
Bi-direction calibration for both instrument and transducer.
Class 1 accuracy over the ‘Primary’ classification range (+/-0.5% of reading
from 20 to 100% of full scale).
Battery power for use in harsh environments (mains supply for
charging).
Continuous RS-232 output.
Analogue output.
Limit indication for up to 8 user defined target values.
HE transducers are available in both static and annular
transducer designs.
Supplied in a water tight carry case.
Back panel. Two connector covers removed for illustration.
ransducers
Part No.
Description
50736.xxx
500 N.m Static Transducer 3/4” M/F sq. dr.
50737.xxx
50738.xxx
50739.xxx
50751.xxx
50705.xxx
50729.xxx
50706.xxx
50730.xxx
500 lbf.ft Static Transducer 3/4” M/F sq. dr.
1000 N.m Static Transducer 1” M/F sq. dr.
1000 lbf.ft Static Transducer 1” M/F sq. dr.
3000 N.m Static Transducer 11/2” M/M sq. dr.
5000 N.m Static Transducer 11/2” M/F sq. dr.
5000 N.m Static Transducer 11/2” M/M sq. dr.
5000 lbf.ft Static Transducer 11/2” M/F sq. dr.
5000 lbf.ft Static Transducer 11/2” M/M sq. dr.
50728.xxx
10000 N.m Static Transducer 21/2” M/F sq. dr.
50726.xxx
25000 N.m Static Transducer 31/2” M/M sq. dr.
Part No.
Description
50727.xxx
40000 N.m Static Transducer 31/2” M/M sq. dr.
43217
TTL-HE instrument
50744.xxx
100000 N.m Static Transducer 31/2” M/M sq. dr.
50743.xxx
100000 lbf.ft Static Transducer 31/2” M/M sq. dr.
50767.xxx
1000 N.m Annular Transducer
50745.xxx
3500 N.m Annular Transducer
50725.xxx
10000 N.m Annular Transducer
60245.200
60250.200
60263.200
60266.200
60256.200
60257.200
HE transducer Lead
HE Inst to Standard Smart Static TD Lead
HE Inst to Standard Smart Rotary TD Lead
HE Transducer to TTT/TST Lead
Serial Data Lead for TTL-HE to no connector
Ancillaries output lead for TTL-HE to no connector
Other Transducers available on request.
5000 N.m Static
Transducer
H Instrument and ncillaries
Introduction
Hydraulic ool alibration Fixtures
Norbar’s Hydraulic Tool Calibration Fixture is a robust device that allows accurate testing
of hydraulic torque wrenches. A system comprises of a Calibration Fixture and Transducer
from the tables below. Also required is a torque measuring instrument, see pages 76 - 81
and transducer cable, see page 86.
80021 with Transducer fitted.
• Bearing support for transducer gives improved accuracy.
• Interchangeable stainless steel square and round reaction posts.
• Hardened steel inserts to locate reaction posts in two positions: suits most hydraulic
wrenches.
• Optimised material sections for robust but portable design.
• For hexagon link wrenches, a wide range of hexagon to square adaptors is available. Contact Norbar for information.
Hydraulic ool alibration Fixtures
Part No.
Capacity
80021
7000 N.m
Square
Drive
11/2”
80022
80023
50000 N.m
80000 N.m
21/2”
31/2”
Sleeve daptors
Part No.
Male Square
86034.4
11/2”
Female
Square
3/4”
21214
29617
29618
11/2”
21/2”
31/2”
1”
11/2”
21/2”
Max Torque
1200 N.m
3500 N.m
10500 N.m
50000 N.m
ransducers
Part No.
Description
For use with
50703.xxx
250 - 2500 N.m
11/2” sq. dr. 80021
50704.xxx
50599.xxx
50630.xxx
50669.xxx
50776.xxx
50777.xxx
50778.xxx
50779.xxx
50780.xxx
50781.xxx
50782.xxx
50783.xxx
250 - 2500 lbf.ft
500 - 5000 N.m
500 - 5000 lbf.ft
700 - 7000 N.m
1000 - 10000 N.m
1000 - 10000 lbf.ft
2500 - 25000 N.m
2500 - 25000 lbf.ft
3000 - 30000 lbf.ft
5000 - 50000 N.m
6000 - 60000 lbf.ft
8000 - 80000 N.m
11/2” sq. dr. 80021
11/2” sq. dr. 80021
11/2” sq. dr.. 80021
11/2” sq. dr.. 80021
21/2” sq. dr. 80022
21/2” sq. dr. 80022
21/2” sq. dr. 80022
21/2” sq. dr.. 80022
21/2” sq. dr. 80022
21/2” sq. dr. 80022
31/2” sq. dr. 80023
31/2” sq. dr. 80023
Harsh Environment Transducers available on request.
PI Intervention ool est Pots
These reaction pots allow for the accurate testing of API rotary intervention tools.
• Conform to ISO 13628-8:2002(E).
• Customer specific solutions also available.
• Lightweight all aluminium construction.
• Incorporated lifting handles.
• Eye bolts provided on larger units
• Optional deck mount kit available, Part No. 81018.
.
Test Pots and Kits
Part No.
Description
80019
Class 4 Pot
60278.xxx
80020
60279.xxx
Class 4 Kit
Class 7 Short Pot*
Class 7 Short Kit*
* FMC. Receptacle to suit ‘short’ FMC style Class
7 rotary torque intervention tools.
Class 4 Intervention Tool Test Pot Kit includes: Pot,
TTL-HE instrument, HE Transducer, Transducer lead and
waterproof case.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
91
Introduction
ru heck™
Models 3 N.m, 10 N.m and 25 N.m
Simple, Cost Effective Torque Testing.
The importance of keeping your torque tools in peak calibration condition is well established. Many businesses achieve this by using a third
party calibration service. However, how much more convenient would
it be to perform calibration checks in-house? Tools could be checked
more frequently, immediately if a problem is suspected, and tools would
not need to leave site unnecessarily.
The main reasons that more companies do not perform calibration checks on
their own tools are the cost of testers and fears over the complexity of the testing
equipment. Norbar’s ‘TruCheck’ torque screwdriver testers aim to sweep aside
these concerns. They are very cost effective being significantly cheaper than most
similar products on the market and the basic version of the TruCheck particularly is
very simple to use.
TruCheck Plus 3 N.m and 10 N.m
The product comes in two versions: there is a basic version, simply called ‘TruCheck’ and a version with greater functionality called ‘TruCheck Plus’.
TruCheck 25 N.m
echnical Specification
Accuracy: +/-1%, +/-1 digit over the stated operating range.
Display: 4 digit, 7 segment LED.
TruCheck 3 N.m and 10 N.m
Drive Size: 1/4” male hexagon (vertical)
Dimensions in mm: 64(d) x 175(w) x 72(h)
Weight: 2.6 kg shipping
TruCheck 25 N.m
Drive Size: 1/4” male hexagon (horizontal) supplied with 1/4” and 3/8” female square drive
adaptors
Dimensions in mm: 72(d) x 175(w) x 64(h)
Model
Part No
Range
Weight
(kg)
Height
(mm)
Width
(mm)
Depth
(mm)
TruCheck 3 N.m
43253
0.1 - 3 N.m
2.6
72
175
64
TruCheck Plus 3 N.m
43250
0.1 - 3 N.m
2.6
72
175
64
TruCheck 10 N.m
43254
1 - 10 N.m
2.6
72
175
64
TruCheck Plus 10 N.m
43251
1 - 10 N.m
2.6
72
175
64
TruCheck 25 N.m
43255
1 - 25 N.m
2.6
72
175
64
TruCheck Plus 25 N.m
43252
1 - 25 N.m
2.6
72
175
64
Weight: 2.6 kg shipping
Materials/Finish: Powder coated aluminium housing. Stainless steel
transducer shaft.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
71
TruCheck™
Models 350 N.m, 1000 N.m and 2000 N.m
One of the concerns in putting a torque tester into an environment where
people are not calibration specialists is that incorrect selections will be made with
the potential for incorrect tool setting and consequently tool failure. Norbar’s
solution is to remove all choices from the operator. The TruCheck is for click
type torque wrenches and comes with a single measurement unit (N.m or lbf.ft).
There is only one button on the device and that is to zero the display. Operation
is simplicity itself and it is virtually impossible to go wrong!
Model
TruCheck 350 N.m
TruCheck 250 lbf.ft
TruCheck 1000 N.m
TruCheck 750 lbf.ft
TruCheck 2000 N.m
Range
TruCheck 10 - 350 N.m
Part
Range
Weight Height
No
(kg)
(mm)
43221 10-350 N.m
3.2
85
43226 10-250 lbf.ft
3.2
85
43230 100-1000 N.m
4.8
85
43237 75-750 lbf.ft
4.8
85
43244 200-2000 N.m
**
85
Width
(mm)
150
150
175
175
175
Depth
(mm)
145.5
145.5
145.5
145.5
145.5
Power Tool Test Fixture
For TruCheckTM
1000 N.m and 750 lbf.ft (Part
Number 50757)
2000 N.m, (Part Number
50774)
These Power Tool Test Fixtures incorporate a Joint Simulation Rundown Assembly, base plate, reaction plate, drive
adaptors and a reaction adaptor. When used in conjunction
with a TruCheck Plus 1000 or TruCheck Plus 2000, provides
a cost effective means of testing Norbar’s PTM-52, PTM72 and PT72 tools. The Joint Simulation elements can be
purchased separately for customers wishing to design their
own reaction fixtures; part number 50758 for 1000 N.m and
50775 for 2000 N.m. These joint simulators are not
recommended for use with impact or impulse
type wrenches.
72
Introduction
ru heck™ Plus
Accepting that some customers require more flexibility than the basic
TruCheck provides, the ‘Plus’ adds a comprehensive range of features.
With three modes of operation the TruCheck Plus is suitable for click
wrenches, dial and electronic wrenches and in ‘Track’ mode will continuously monitor the torque signal.
There are three torque units - N.m, lbf.ft and lbf.in.
TruCheck Plus also has a user selectable ‘limit’ feature. The operator sets the
target torque and tolerance and the instrument will calculate whether the reading
is within tolerance and indicate the result by illuminating one of three coloured
LEDs: yellow = low, green = OK, red = high.
Finally, TruCheck Plus has an RS-232 serial data output and comes complete with
an RS-232 lead. The reading, measurement unit and limit status (Low, OK or
High) are output via RS-232.
TruCheck Plus 100 - 1000 N.m
3/4” socket is supplied
Model
Part
Range
Weight Height
No
(kg)
(mm)
TruCheck Plus 350 N.m 43222 10-350 N.m
3.2
85
TruCheck Plus 1000 N.m 43231 100-1000 N.m
4.8
85
TruCheck Plus 2000 N.m 43245 200-2000 N.m
**
85
alibration
Width
(mm)
150
175
175
Depth
(mm)
145.5
145.5
145.5
ptions
TruCheck instruments are supplied as standard with a traceable calibration certificate for the clockwise direction.
As an option, UKAS accredited calibration certificates from Norbar’s laboratory can be supplied, either clockwise
only or clockwise and counter clockwise.
Part No.
Description
TCACC.CW
TCAC.CW+CCW
UKAS accredited calibration clockwise
UKAS accredited calibration clockwise and counter clockwise
Note: UKAS accredited calibration is from 5% to 100% of full scale for part numbers 43243, 43221, 43226, 43222 43250,
43251, 43253 & 43255 and 10% to 100% for part numbers 43230, 43231, 43237, 43244, 43245, 43251 & 43254.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
73
Professional Torque Tester
Pro-Test – Series 2
The accuracy, ease of use and price competitiveness of the Pro-Test instrument has made it the choice of
many industrial, military and automotive customers worldwide. The Pro-Test Series 2 has many features
designed to make life easier and reduce the opportunities for error when calibrating torque wrenches.
Features
•Pictorial display panel for easy mode selection.
•Limit detection with low, pass and high indication both on the screen, and by coloured LEDs.
Limit status is also output via RS-232-C. Target torque and tolerance can be set by the operator.
•ISO 6789 calibration mode automatically calculates the torque wrench calibration points and
tolerance. All the user has to do is set the maximum calibration point for the wrench – the
instrument does the rest for you!
•Memory function displays the 5 previous readings taken by the operator. For operators creating
manual calibration certificates, there is no need to stop and write after each reading, hence speeding
the process.
•Carry case is now a standard feature.
•RS-232 cable included as standard.
Pro-Test display and transducer in carry case.
Flexible mounting options of Pro-Test on Bracket,
Part No. 62198
74
Introduction
Professional orque
ester
Pro- est – Series 2
•
•
•
•
•
•
•
•
•
•
•
•
Supplied with UKAS accredited calibration certificate.
Guaranteed classification to BS7882:2008, Class 1 or better
over the primary calibration range (20% to 100% of full scale),
Class 2 or better over the secondary calibration range (lowest
calibrated value to 20% of full scale). Class 1 equates to ±0.5% of reading.
Three transducers are available in the range, up to 1500 N.m (1100 lbf.ft).
Three essential operating modes allow the Pro-Test to be used with all torque
wrench types: ‘Track’ displays the live value, ‘Peak Memory’ records the highest
value and ‘First Peak Memory’ records the first peak of torque (for click type
torque wrenches). Both memory modes can be used with manual or automatic
reset.
Large back lit display is easily visible from a distance and in poor light.
All common units of torque measurement are included.
User can select the language they wish to work in (most European languages are
included).
Transducer can be mounted for torque wrench operation in the horizontal or
vertical plane.
RS-232-C is included for the output of reading to a printer, PC, data capture unit, SPC
software etc.
Optional mounting plate, Part No. 62198 gives greater flexibility of mounting options.
All user settable parameters are menu selectable from the front panel.
As standard, all transducers are calibrated in a clockwise direction. For additional anti
clockwise direction order Part No. PROTEST.CCW.
Measure Screen
Limit type selection
Pro- est
Model
Part
No
Pro-Test 60
Pro-Test 400
Pro-Test 1500
43218
43219
43220
Operating
Range
N.m
0- 60
0 – 400
0 – 1500
Calibration
Range
N.m
1.2 - 60
8 - 400
30 - 1500
System
Resolution
N.m
0.001
0.01
0.1
Input Hex
A/F
mm
10
22
36
Square Drive
Adaptor
in
1⁄4+3⁄8+1⁄2
3⁄8+1⁄2+3⁄4
3⁄4
Pro- est ncillaries
Part No
60253
62198
PROTEST.CCW
Description
12V DC Power Supply*
Mounting Plate
Pro-Test Counter Clockwise Calibration
* Option only necessary when powering from a 12V DC vehicle battery.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
75
orque Screwdriver ester
S - Series 2
The TST combines simplicity with up to date technology to provide a high quality instrument for the testing and calibration
of low capacity torque tools. Featuring an internal transducer complete with Joint Simulation Rundown Assembly, the TST
is available in 3 torque ranges, 0.04 to 2 N.m, 0.5 to 10 N.m and 1.25 to 25 N.m. Class 1 system accuracy over its Primary
range (±0.5% of reading from 20% to 100% of full scale).
What makes the TST genuinely versatile is the interface for an external transducer. This interface, accessed by a 2 way
switch in the TST, allows the connection of any transducer from Norbar’s “SMART” range and most mV/V calibrated
transducers from Norbar or other manufacturers.
Norbar is UKAS accredited for the calibration of electrical torque indicator displays and the TST is supplied with a
calibration certificate. This ensures that each element of the system is fully traceable and interchangeable. The TST is also
supplied with a UKAS torque calibration certificate for the complete system i.e. display and internal transducer.
TST in standard carry case.
Back Panel
Introduction
orque Screwdriver
ester
( S ) - Series 2
•
•
•
•
•
•
•
•
•
•
•
•
•
Pictorial display panel for easy mode selection.
Limit detection with low, pass and fail indication. Up to 12 target
values can be set.
Digital limit state output for control of external tools.
Operation from fast charge internal battery pack (maximum time of 3 hours 20
minutes for full charge) or a.c. supply (90 to 264 Volts).
RS-232-C serial data interface for connection to a printer or PC. Continuous RS
232 output when used in track mode (up to 11 readings per sec).
Pulse count feature in Impulse mode and Clutch Tool mode.
“SMART” intelligence for transducer recognition.
Memory for calibration details of 20 non-“SMART” mV/V calibrated transducers.
Analogue output allows the instrument to be used as part of a process control
system for performance analysis.
User selectable frequency response for each mode of operation.
All user selectable features have password protection. The instrument can be issued to users with
only the required modes of operation and units of measure enabled. This feature can virtually
eliminate operator induced errors.
Supplied in carry case.
All common measurement units for torque are included plus users can configure their own units to
interface with non torque transducers.
S
Model
S
Part
No
Range
TST 2
TST 10
43212
43213
N.m
0.04-2
0.5-10
TST 25
43214
1.25-25
lbf.ft
0.4-20
5-100
12.5-250
ncillaries
Part No
60216.200
60217.200
TST.CCW
50539*
50540*
50541*
Description
TST to 10 Way lead, for Norbar Rotary Transducers
TST to 6 Way lead, for Norbar Static & Annular Transducers
TST Counter Clockwise Calibration
Joint Simulation Rundown Assembly 2 N.m
Joint Simulation Rundown Assembly 10 N.m
Joint Simulation Rundown Assembly 25 N.m
*The TST comes with a Joint Simulation Rundown Assembly as standard.
These Part No.s are for replacement or additional fixtures only.
Limit Setting Screen
Measure Screen
ccuracy
Input Voltage
Equivalent Torque
Accuracy
Calibration Uncertainty*
@0.5 mV
@1.0 mV
@2.0 to 18.9 mV
5% of full scale
10% of full scale
20% to 110% of full scale
±0.1% of reading
±0.05% of reading
±0.05% of reading
±0.13%
±0.08%
±0.06%
*Using a coverage factor of k=2, to give a confidence level of approximately 95%.
Resolution: 5 digits for all Norbar transducers.
Weight:
2.2 kg (4.8 lb).
Dimensions: 160 mm deep x 288 mm wide x 72 mm high.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
77
orque ool ester
- Series 3
The TTT shares all of the extensive features of the TST except that it has no internal transducer. Instead, the
TTT offers not one but three external transducer interfaces allowing any three transducers to be simultaneously
connected. Selection between the transducers is made by a rotary switch at the back of the instrument case.
Any transducer from Norbar’s “SMART” range and most mV/V calibrated transducers from Norbar or other
manufacturers can be connected to the TTT. The “SMART” feature means that once a transducer has been
connected, the instrument will automatically recognise calibration details such as mV/V output, serial number and
capacity.
Norbar is UKAS accredited for the calibration of electrical torque indicator displays and the TTT is supplied with a
calibration certificate. This ensures that each element of the system is fully traceable and interchangeable.
TTT in standard carry case.
STB1000 Transducer also shown.
Back panel
Introduction
orque ool ester
- Series 3
•
•
•
•
•
•
•
•
•
•
•
•
•
Pictorial display panel for easy mode selection.
Limit detection with low, pass and fail indication. Up to 12 target
values can be set.
Digital limit state output for control of external tools.
Operation from fast charge internal battery pack (maximum time
of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
RS-232-C serial data interface for connection to a printer or PC. Continuous
RS 232 output when used in track mode (up to 11 readings per sec).
Pulse count feature in Impulse mode and Clutch Tool mode.
“SMART” intelligence for transducer recognition.
Memory for calibration details of 20 non-“SMART” mV/V calibrated transducers.
Analogue output allows the instrument to be used as part of a process control
system for performance analysis.
User selectable frequency response for each mode of operation.
All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature
can virtually eliminate operator induced errors.
Supplied in carry case.
All common measurement units for torque are included plus users can configures their
own units to interface with non-torque transducers.
Part No
43228
Description
Torque Tool Tester
Details of connected transducer displayed by
pressing # key.
ncillaries
Part No
60216.200
60217.200
TTT.CCW
Description
TTT to 10 Way lead, for Norbar Rotary Transducers
TTT to 6 Way lead, for Norbar Static & Annular Transducers
TTT Counter Clockwise Calibration
Language setting
ccuracy
Input Voltage
Equivalent Torque
Accuracy
Calibration Uncertainty*
@0.5 mV
@1.0 mV
@2.0 to 18.9 mV
5% of full scale
10% of full scale
20% to 110% of full scale
±0.1% of reading
±0.05% of reading
±0.05% of reading
±0.13%
±0.08%
±0.06%
*Using a coverage factor of k=2, to give a confidence level of approximately 95%.
Resolution: 5 digits for all Norbar transducers.
Weight:
1 Kg (2.2 lb).
Dimensions: 150 mm high x 200 mm wide x 180 mm deep.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
79
- ox and
( orque
MS
ata Management System)
The T-Box together with Norbar’s Torque Data Management System (TDMS) software provides the complete
solution for torque tool calibration, data logging and data management and archiving on your PC.
•
•
•
•
•
•
•
T-Box features a colour 5.7” (145 mm) touch screen LCD display with graphic on screen icons for simple tool
selection. Feature modes include Click Hydraulic, Pulse and Stall tools that enable the most common torque
products to be tested by a simple touch of the screen.
T-Box also features a new “Pulse Tool Mode” which uses a mathematical algorithm to accurately determine the
output torque from Impulse tools.
T-Box comes pre-loaded with Tool Templates for the entire Norbar product range of Torque Wrenches and
Pneutorqes® enabling the user to simply assign individual tools to perform calibrations to the relevant ISO standard.
other tool templates can be created by the operator.
Graphical analysis and display of joint profiles are available using the Graph Mode.
T-Box can connect up to 4 Smart Transducers including transducers with angle capabilities for instant connectivity.
Alternatively, non-Norbar transducers with a mV/V output can be programmed into the T-Box memory.
T-Box has 2 USB ports, one RS232 serial port and an ancillary connection (USB cable supplied as standard).
T-Box can log data at a rate of 5 readings per second or can be set to log torque data at the required angle
increment, for example, take a torque reading at every degree.
T-Box mode screen.
T-Box Language selection screen.
T-Box shown
with Neck
Strap and
Mounting
Bracket.
T-Box Instrument screen.
Introduction
- ox and
MS
T-Box is supplied with Norbar’s new Torque Data Management
System software (TDMS) for complete tool data management and
archiving on your PC.
• TDMS enables data to be viewed graphically, in an SPC format, or
as a Calibration Certificate (available in English, French, German,
Italian, Spanish and Russian).
• T-Box contains a large capacity memory that will enable a user
to collect data and store in excess of 100,000 individual test results
directly to the instrument and then synchronise to the TDMS software.
•
T-Box kit includes: • T-Box instrument complete with UKAS accredited bi-directional calibration
certificate
• Carry Case
• Quick Reference Guide
• Mounting foot and bolts
• Neck strap and mounting kit
• Power supply with appropriate local mains supply cable (100 - 240 v)
• USB cable
• USB memory stick pre-loaded with TDMS software
• T-Box Operator’s Handbook
• TDMS Operator’s Handbook.
- ox and
MS
Part No
43236
61129
Description
T-Box Instrument with TDMS Software
TDMS Software (supplied on USB Flash Drive)
- ox ccessories
Part No
60216.2
60217.2
60223.2
Description
T-Box to 10 way lead, for Norbar Rotary Transducers
T-Box to 6 way lead, for Norbar Static and Annular Transducers
T-Box to no connector (for non-Norbar Transducers)
60248
Serial Data Lead Kit
Torque vs Angle graph produced using
TDMS software
ccuracy
Input Voltage
Equivalent Torque
Accuracy
Calibration Uncertainty*
@0.5 mV
@1.0 mV
@2.0 to 18.9 mV
5% of full scale
10% of full scale
20% to 110% of full scale
±0.1% of reading
±0.05% of reading
±0.05% of reading
±0.13%
±0.08%
±0.06%
*Using a coverage factor of k=2, to give a confidence level of approximately 95%.
Resolution:
Weight (T-Box only):
Dimensions:
5 active digits for all Norbar transducers.
1.5 Kg (3.3 lb).
162 mm high x 205 mm wide x 60 mm deep.
Torque and Angle vs Time graph produced using
TDMS software
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
81
Flange Mounted ransducers - FM
Flange Mounted Transducers incorporate mounting points for securely fixing the transducer to the working surface. The transducer lead is also included and is fitted with a high quality Lemo® connector, suitable for attachment to TST and TTT instruments.
•
•
•
•
•
Classified to BS7882:2008, typically better than Class 1 for the primary classification range (±0.5% of reading from 20% to
100% of full scale).
“SMART” – TST and TTT instruments will automatically recognise calibration details.
Joint Simulation Rundown Assembly is included on transducers up to 150 N.m (100 lbf.ft) allowing joint simulation for power
tool testing.
Supplied with UKAS calibration certificate.
Transducers are supplied with precision made square drive adaptors.
1500 N.m Transducer
Joint Simulation undown
ssemblies for Flange
Mounted ransducers
Part No.
50539
50540
50541
50692
Range
0.04-2N.m
0.4-20 lbf.in
0.5-10 N.m
5-100 lbf.in
1.25-25N.m
12.5-250 lbf.in
7.5-150 N.m
5-100 lbf.ft
A/F Size of
Hex Screws
1
/4”
1
/4”
1
/4”
14mm
The above Joint Simulation Rundown Assemblies are supplied with
the Flange Mounted Transducer as standard, but can also be ordered
separately.
S.I alibrated ransducers
Capacity
Part No.
Range
2 N.m
50671.xxx
0.04-2 N.m
Square Drives
Supplied - in
1⁄4
10 N.m
25 N.m
150 N.m
400 N.m
1500 N.m
50672.xxx
50673.xxx
50674.xxx
50675.xxx
50676.xxx
0.5-10 N.m
1.25-25N.m
7.5-150 N.m
20-400 N.m
30-1500 N.m
1⁄4
1⁄4 + 3⁄8
3⁄8 + 1⁄2
1⁄2 + 3⁄4
1⁄2 + 3⁄4 + 1
Imperial alibrated ransducers
Capacity
Part No.
Range
20 lbf.in
50677.xxx
0.4-20 lbf.in
Square Drives
Supplied - in
1⁄4
100 lbf.in
250 lbf.in
100 lbf.ft
250 lbf.ft
1000 lbf.ft
50678.xxx
50679.xxx
50680.xxx
50681.xxx
50682.xxx
5-100 lbf.in
12.5-250 lbf.in
5-100 lbf.ft
12.5-250 lbf.ft
20-1000 lbf.ft
1⁄4
1⁄4 + 3⁄8
3⁄8 + 1⁄2
1⁄2 + 3⁄4
1⁄2 + 3⁄4 + 1
Select part no. suffix .LOG if the transducer is to be connected to TST or TTT (example:
50671.LOG). For connection to a non Norbar instrument or when a mV/V certificate is
required, select .IND.
Introduction
“SM
S
” orque lock -
Classified to BS7882:2008, typically better than Class 1 for the primary
classification range (±0.5% of reading from 20% to 100% of full scale).
• “SMART” – TST and TTT instruments will automatically recognise
calibration details.
• Supplied with UKAS accredited calibration certificate.
There are two models, STB1000 and STB3000. Transducer Lead is incorporated and is
terminated in a Lemo® connector suitable for the TST and TTT.
•
S.I Calibrated Transducers
Capacity
Part No.
Range
STB1000
STB3000
50683.xxx
50684.xxx
20-1000 N.m
150-3000 N.m
Square Drives
Supplied - in
1⁄2 + 3⁄4
3⁄4 + 1
Select part no. suffix .LOG if the transducer is to be connected to TST and TTT (example:
.LOG). For connection to a non Norbar instrument or when a mV/V certificate is required,
select .IND.
Joint Simulation Rundown Assemblies
for STB1000
Part No.
50693
50694
A/F Size of
Hex Screws -mm
Range
10-140 N.m
10-100 lbf.ft
100-700 N.m
70-500 lbf.ft
Large Mounting Bracket,
Part No. 62220 suitable
for 150 N.m to 1500 N.m
Transducers
12
19
Small Mounting Bracket,
Part No. 62221 suitable
for 2 N.m to 400 N.m
Transducers
150 N.m
Transducer
2 N.m Transducer
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
83
Static orque ransducer
The accuracy and quality of the Norbar Static Torque Transducers has made them the first choice of many calibration
laboratories throughout the world.
•
•
•
•
•
•
•
•
•
Up to 6800 N.m (5000 lbf.ft) classified to BS7882:2008, typically Class 1 or better for the primary classification range
(±0.5% of reading from 20% to 100% of full scale).
From 6800 N.m (5000 lbf.ft) up to 108,500 N.m (80,000 lbf.ft) classified to BS7882:2008, Class 1 to Class 5 for the
classification range (±0.5% to _+/-2.5% of reading) dependant on the type of transducer.
Robust, heat treated, alloy steel torsion shaft design.
Designed to ignore non torsional forces.
Operates in clockwise and anti-clockwise directions.
Calibration up to 108,500 N.m (lbf.ft) with a UKAS accredited calibration certificate.
Calibrated in clockwise direction as standard. Anti-clockwise calibration provided on request.
‘SMART’ transducers have built in memory circuit which contains essential information about the transducer. This
information can be read by Norbar’s TST and TTT instruments meaning that when the transducer is connected, it is
immediately recognised and ready for use. When ordering for a TST or TTT, use part no. suffix ‘.LOG’ (eg. 50659.LOG) if
you require a torque units calibration certificate.
‘SMART’ transducers can also be used with many instruments not of Norbar manufacture. However, these will operate as
normal ratio calibrated (mV/V) transducers – the ‘SMART’ data will not be read. For non Norbar instruments or for when a
mV/V certificate is required, use part code suffix ‘.IND’.
Capacity (N.m)
Part No.
1
Square Drive
Dimensions (mm)
Bench Stand
50587.IND*
in (m/f)
1⁄4
A
79
BØ
36.5
C
86
2.5
5
10
25
50
100
250
250
50588.xxx
50589.xxx
50590.xxx
50591.xxx
50592.xxx
50593.xxx
50594.xxx
50701.xxx
1⁄4
1⁄4
1⁄4
3⁄8
3⁄8
1⁄2
1⁄2
3⁄4
79
79
79
79
79
79
79
118
36.5
36.5
36.5
36.5
36.5
36.5
36.5
54
86
86
86
89.5
89.5
92.8
92.8
141
50211
50211
50211
50212
50212
50213
50220
500
50596.xxx
3⁄4
118
54
141
50220
1000
50772.xxx
1
118
54
146
50221
2500
50703.xxx
11⁄2
117
95
160
50127
5000
50599.xxx
11⁄2
117
95
160
50127
7000
50669.xxx
11⁄2
117
95
160
50127
10000
50776.xxx
21⁄2
145.5
130
209
-
25000
50603.xxx
21⁄2 (m/m)
68.5
110
200
-
25000
50778.xxx
21⁄2
145.5
130
209
-
50000
50781.xxx
21⁄2
145.5
130
209
-
80000
50783.xxx
31⁄2 (m/m)
205
160
291.5
-
100000
50607.xxx
31⁄2
98
165
271
-
50211
*Not suitable for TST and TTT.
Select part no. suffix .LOG if the transducer is to be connected to TST or TTT (example: 50588.LOG). For connection to a non Norbar instrument or when a
mV/V certificate is required, select .IND.
Introduction
Static orque ransducer
3/4” Square Drive
Transducer
31/2” Square
Drive Transducer
21/2”
Square Drive
Transducer
3/8” Square Drive Transducer
Capacity
Part No.
Square Drive
Dimensions (mm)
A
79
BØ
36.5
C
86
Bench Stand
100
ozf.in
50609.IND*
in (m/f)
1⁄4
1000
10
25
50
100
250
500
1000
ozf.in
lbf.in
lbf.in
lbf.in
lbf.in
lbf.in
lbf.in
lbf.in
50616.xxx
50610.IND*
50612.xxx
50614.xxx
50617.xxx
50619.xxx
50621.xxx
50623.xxx
1⁄4
1⁄4
1⁄4
1⁄4
1⁄4
3⁄8
3⁄8
1⁄2
79
79
79
79
79
79
79
79
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
86
86
86
86
86
89.5
89.5
92.8
50211
50211
50211
50211
50211
50212
50212
50213
1
lbf.ft
50611.xxx
1⁄4
79
36.5
86
50211
2.5
lbf.ft
50613.xxx
1⁄4
79
36.5
86
50211
5
lbf.ft
50615.xxx
1⁄4
79
36.5
86
50211
25
lbf.ft
50620.xxx
3⁄8
79
36.5
89.5
50212
50
lbf.ft
50622.xxx
3⁄8
79
36.5
89.5
50212
100
lbf.ft
50624.xxx
1⁄2
79
36.5
92.8
50213
250
lbf.ft
50625.xxx
1⁄2
79
36.5
92.8
-
250
lbf.ft
50702.xxx
3⁄4
118
54
141
50220
500
lbf.ft
50627.xxx
3⁄4
118
54
141
50220
1000
lbf.ft
50773.xxx
1
118
54
146
50221
2500
lbf.ft
50704.xxx
11⁄2
117
95
160
50127
5000
lbf.ft
50630.xxx
11⁄2
117
95
160
50127
10000
lbf.ft
50777.xxx
21⁄2
145.5
130
209
-
25000
lbf.ft
50635.xxx
21⁄2 (m/m)
68.5
110
200
-
25000
lbf.ft
50779.xxx
21⁄2
145.5
130
209
-
30000
lbf.ft
50780.xxx
21⁄2
145.5
130
209
-
50000
lbf.ft
50636.xxx
31⁄2 (m/m)
98
165
271
-
60000
lbf.ft
50782.xxx
31⁄2
205
160
291.5
-
100000
lbf.ft
50637.xxx
31⁄2 (m/m)
98
165
271
-
50211
* Not suitable for TST and TTT
Select part no. suffix .LOG if the transducer is to be connected to TST or TTT (example: 50616.LOG). For connection to a non Norbar instrument or when a mV/V
certificate is required, select .IND.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
85
TWL1500 shown with Flange
Mounted Transducers, TTT and
Model 1000 torque wrench
TWL1500 shown with Flange Mounted Transducers,
TTT and Model 1000 torque wrench
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement