Panasonic WS-AT75E-K, WS-AT80E User manual

Panasonic WS-AT75E-K, WS-AT80E User manual
SPEAKER SYSTEMS
20cm (8") High-Power Speaker
20cm (8") High-Power Speaker
WS-AT80E
WS-AT75E-K
Input terminals
Input terminals
(1/4 TRS phone jack
replaceable with XLR
connector and push
-type wire terminal)
(push-type wire terminal)
• 2-Way 20cm (8") bass reflex speaker system
• Smooth response with high power handling capacity
•
•
•
•
•
•
•
•
•
(continuous program/RMS), 160 W/80 W
High-frequency driver utilizes new SCWG (Square Contour
Wave Guide) horn.
High impact molded resin enclosure.
Six-sided trapezoidal design with built-in handle.
Equipped with thermal protection circuit
Has 1/4 TRS phone jack and push wire-type terminals.
Directivity
Directivity
Frequency Response
110
dB
100
(continuous program/RMS), 160 W/80 W
High-frequency driver utilizes new SCWG (Square Contour
Wave Guide) horn.
High impact molded resin enclosure.
Six-sided trapezoidal design with built-in handle.
Equipped with thermal protection circuit
Frequency Response
(1W . 1m)
110
dB
90
80
-30 -20 -10 0 +10dB
2kHz
4kHz
+10dB 0 -10 -20 -30
500Hz
1kHz
70
Horizontal
IMPEDANCE
-30 -20 -10 0 +10dB
2kHz
4kHz
Horizonatal
60
3RD H.D.
IMPEDANCE
2ND H.D.
RAMSA
20
20
-30 -20 -10 0 +10dB
2kHz
4kHz
70
50
40
30
+10dB 0 -10 -20 -30
500Hz
1kHz
80
60
50
40
OUTPUT SPL
100
OUTPUT SPL
90
+10dB 0 -10 -20 -30
500Hz
1kHz
30
3RD H.D.
50 100 200 500 1k 2k
Vertical
5k 10k 20k
Hz
+10dB 0 -10 -20 -30
500Hz
1kHz
-30 -20 -10 0 +10dB
2kHz
4kHz
Vertical
20
2ND H.D.
10
20
50 100 200
500 1k
2k
5k 10k 20k
Hz
Dimensions
Dimensions
8-M8
243
128
405
Net
260
150
192
128
280
374
Unit: mm
228
Unit: mm
SPECIFICATIONS
Speaker Type
Input Impedance
Power Handling Capacity
Sensitivity
Frequency Response
Crossover Frequency
Drivers
Dispersion
Dimensions
Weight (approx.)
Input Terminal
Mounting Hardware
PUBLIC ADDRESS
• 2-Way 20cm (8") bass reflex speaker system
• Smooth response with high power handling capacity
2-way, bass-reflex
8Ω
80 W (RMS EIA-RS426A), 160 W (continuous program)
92 dB (1 m/1 W)
70 Hz~20 kHz
2,000 Hz
LF : 20cm (8") woofer
HF : 60˚ x 60˚ SCWG horn / compression driver
60˚ (horizontal) x 60˚ (vertical)
405 (H) x 280 (W) x 243 (D) mm
7.5 kg
1/4 TRS phone connector
push-type wire terminal
Forged Eye Bolts
Effective power measured by the test method prescribed by EIA (Electronic Industries Association)
RS-426-A (1980). (The test signal is white noise passed through a RC high pass filter with a time
constant of 4 msec. and a RC low pass filter with a time constant of 5 msec.)
SPECIFICATIONS
Speaker Type
Input Impedance
Power Handling Capacity
Sensitivity
Frequency Response
Crossover Frequency
Drivers
Dispersion
Dimensions
Weight (approx.)
Input Terminal
2-way, bass-reflex
8Ω
80 W (RMS EIA-RS426A), 160 W (continuous program)
93 dB (1 m/1 W)
70 Hz~20 kHz
2,000 Hz
LF : 20cm (8") woofer
HF : 60˚ x 60˚ SCWG horn / compression driver
60˚ (horizontal) x 60˚ (vertical)
374 (H) x 260 (W) x 228 (D) mm
6.5 kg
push-type wire terminal
Effective power measured by the test method prescribed by EIA (Electronic Industries Association)
RS-426-A (1980). (The test signal is white noise passed through a RC high pass filter with a time
constant of 4 msec. and a RC low pass filter with a time constant of 5 msec.)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement