Untitled - APS - Lighting and Safety
Table of Contents
Why Choose J.W. Speaker Lights? …......................4
New Products for 2014 …………………........….......8
Point-Of-Purchase Displays .....................….…......10
Forward Lighting ………………………….......….....12
Worklights ………………………………….......…….40
Emergency & Warning…………….……...................90
Interior …………………………………….......…….104
Signal Lights.........................................................114
Thermal Imaging ……………………………..........146
Electronics ……………………………………….....148
Heavy Duty Light Bars ……………………............154
Vehicle Identification Signs .……….......................156
Service Parts ………………………………….........158
2
Lighting Terminology …………………......…….....160
Raw vs. Effective Lumens ………………..............161
EMI (Electromagnetic Interference)….…………….162
Ingress Protection Ratings ………….………….....163
Regulatory Standards ……………….……............164
Headlight Condensation ..…………………...........165
Warranty Statements ……………………..............166
Warranty Claim Process ………………….............167
Model Number Index ……………………..............168
Information presented in this catalog is accurate to the best of our knowledge. J.W. Speaker reserves the right to
update information contained in this catalog at any time and for any reason. J.W. Speaker is not liable for issues
caused by any misuse or misunderstanding of the content contained in this catalog. For questions or to report an error,
contact us at 262.251.6660 or toll-free at 800.558.7288. For the most current information, visit www.jwspeaker.com.
3
Why Choose J.W. Speaker Lights?
Experienced, Trusted Service
J.W. Speaker has been serving vehicular markets since 1935. We have been a trusted provider for the U.S. Military since the
1940’s and a manufacturer of engineered lighting solutions since the 1950’s. Our portfolio of customers includes household
names such as Harley-Davidson, Arctic Cat, John Deere, and McLaren. These organizations, and many more, choose J.W.
Speaker because of our experience, our nearly 80 year track record for innovation, and our dedication to quality and service.
Weil Street Building, c. 1941
Freistadt Building, 2014
A Leader in Lighting Technology
J.W. Speaker is at the forefront of lighting technology. We know how important it is to stay ahead of the curve, which is why
we invest in researching and developing new technologies.
There are thousands of LED lights in the marketplace, but few, if any, achieve the level of performance that comes standard
with J.W. Speaker lights. The photo below is a side-by-side comparison of two DOT-approved LED headlights. Our LED
headlight is on the left, and a competitor’s LED headlight is on the right. The J.W. Speaker headlight has been specifically
engineered to provide more light in the areas where it is needed most.
A new addition to our lineup of LED worklights is the XD Series. The XD Series uses a unique thermally-conductive
polycarbonate housing which enables the lights to function in extreme heat without sacrificing output or durability.
J.W. Speaker's DOT-Compliant Beam Pattern
4
Competitor's DOT-Compliant Beam Pattern
Why Choose J.W. Speaker Lights?
Internal Testing
J.W. Speaker has a broad range of in-house testing capabilities to ensure that our products meet or exceed a wide variety
of regulations and standards.
Our in-house test lab is equipped to test for:
Electrical
Mechanical
Photometric
• Electromagnetic Compatibility
• Electromagnetic Interference
• Electrostatic Discharge
• Transient Voltage
• Voltage Range
• Condensation
• Drop Test
• Dust Ingress
• Erosion
• Lifespan
• Thermal Cycle
• Thermal Shock
• Torque
• Ultraviolet
• Vibration
• Water Immersion
• Water Spray
• Color
• Illuminance
• Luminance
• Luminous Flux
• Luminous Intensity
External Testing
For instances where J.W. Speaker does not have the appropriate in-house equipment, we also have external testing
capabilities, including the following:
• Conducted Emissions
• Electrostatic Discharge
• Environmental
• Highly Accelerated Life Test
• Radiated Emissions
• Radiated Immunity
Extreme Testing
See page 40 for information on our new XD Series LED worklights, including a video where we put them through a series
of extreme torture tests!
5
Why Choose J.W. Speaker Lights?
Lifetime Limited Warranty
J.W. Speaker currently offers the best LED product warranty in the industry. While other companies boast their own Lifetime
Limited Warranties, the fine print reveals exclusions like “not for use in mining, construction, or other rugged applications.”
Our products are designed, manufactured, and tested to work in those very applications, and we feel that it is important to
have a warranty that backs that up. Read the full details of our Lifetime Limited Warranty on page 158.
Certified for Quality
J.W. Speaker guarantees the highest quality products for our end-users. We are certified by various international government
agencies that issue quality and safety requirements for our products, as well as the processes used to make them. To
confirm that we meet their requirements, the agencies perform regular on-site audits of our factories. Their certification
guarantees we have world-class techniques and methods for making high-quality products.
These are a few of the agencies that approve the design and production of J.W. Speaker’s lights:
• ECE – United Nations Economic Commission for Europe (Europe)
• CCC – China Compulsory Certificate (China)
• ICAT – International Centre for Automotive Technology (India)
• VSCC – Vehicle Safety Certification Center (Taiwan)
6
Why Choose J.W. Speaker Lights?
Your Educational Resource
We know that the best-made decision is an informed decision, which is why we want our customers to be knowledgeable
about lighting. We’ve written articles, created glossaries, and expanded our product specification sheets with the goal of
educating customers about lighting.
We want you to have a firm understanding about topics such as Raw vs. Effective Lumens, or how to differentiate between
condensation and water ingress. You can find this information in the reference section of this catalog (which begins on page
152). Additional educational resources are available in the Reference section of our website, www.jwspeaker.com.
Family Owned, American Made
John W. Speaker founded the J.W. Speaker Corporation in 1935. After his passing in 1960,
his son, John A. Speaker, took over as president and began focusing on the vehicular lighting
market. Today J.W. Speaker is led by John W. Speaker’s grandsons, Tim and Jamie Speaker.
We operate out of two facilities, both located in Germantown, Wisconsin.
7
New Products
Model 90
90mm LED Headlights
Page 14
Model 217
3" LED Signal Light
Page 123
Model 255
LED Vehicle Identification Sign
Page 156
Models 410 & 411
3" x 7" LED Dome Light
Page 110
Model 515
LED Material Handling Headlight
Page 16
Model 527 RED
5" x 10" LED Red Zone Light
Page 97
8
Model 526 XL
6" x 6" LED Worklight
Page 52
Model 660
3" x 7" LED Worklight
Page 56
Model 670 XD
4.5" (PAR36) LED Worklight
Page 57
Model 680 XD
5.75" (PAR46) LED Worklight
Page 58
Model 770 XD
3" x 5" LED Worklight
Page 62
Model 770 RED
3" x 5" LED Spot Light
Page 102
Model 771 XD
3" x 5" LED Worklight
Page 63
Model 775 XD
3" x 5" LED Worklight & Turn Signal
Page 64, 143
Model 776 XD
3" x 5" LED Dual Beam Worklight
Page 65
Model 778 XD
3" x 5" LED Backup Camera Light
Page 66
Model 840 XD
4" x 4" LED Worklight
Page 73-75
Model 880 XD
3" x 5" LED Worklight
Page 76
Model 881 XD
3" x 5" LED Worklight
Page 77
Model 6020
4" x 5" LED Worklight
Page 80
Model 6048
2" x 5" LED Fog Light
Page 19
Model 6145
4" LED Fog Light
Page 22
Model 6150
4" LED Fog Light
Page 24
Model 7151
4" x 5" LED Worklight
Page 84
Model 8475
LED Handheld Worklight
Page 86
Model 9049
3-Module LED Fog Light Bar
Page 36
Model 8770
7" (PAR 56) LED Locomotive Light
Page 32
Anti-Flicker Harness
Page 28
9
Point-Of-Purchase Displays
Generating sales is your #1 priority, and studies show that product lines with point-of-purchase displays out-perform those
without them. That’s why J.W. Speaker has created five different styles of point-of-purchase displays for our authorized
dealers, ranging from a small countertop display to a free-standing floor unit.
Each display comes pre-assembled, and is fully powered so that your customers can see J.W. Speaker LED lighting
products in action—making it a highly effective selling tool. Each display is manufactured in the U.S.A.
Give us a call at 262.251.6660 or toll-free at 800.558.7288 to order yours today!
Worklight Countertop Display
Part # DISPLAYCTWORK
• Includes Model 770 XD and 7150 worklights
• Measures 12" wide x 9" tall x 12" deep
• Comes fully assembled—just plug it in!
• Includes power supply and 120V AC plug
• Backlit J.W. Speaker logo
• Industrial-strength momentary switches to power the lights
• QR codes for smartphone users to scan and access product spec sheets
• Integrated literature pocket in base of unit
Jeep Countertop Display
Part # DISPLAYCTJEEP
• Includes Models 6145 & 8700 Evolution lights
• Measures 14" wide x 12.25" tall x 12" deep
• Comes fully assembled—just plug it in!
• Designed to install into “slatwall” or sit on a flat surface
• Includes power supply and 120V AC plug
• Back-lit J.W. Speaker logo
• Industrial-strength momentary switches to power the lights
• QR codes for smartphone users to scan and access product spec sheet
• Integrated literature pocket in base of unit
• Includes 3' by 6' vinyl J.W. Speaker banner
10
Lozier Worklight Display
Part # DISPLAYLZWORK
• Includes Models 670 XD, 735, 770 XD, 832, 840 XD, 4410, & 7150 lights
• Measures 46.5" wide x 16.5" tall x 17.25" deep
• Designed for use on Lozier-style shelving installations
• Includes power supply and 120V AC plug
• Back-lit J.W. Speaker logo
• Industrial-strength momentary switches to power the lights
• QR codes for smartphone users to scan and access product spec sheets
• Includes both an agricultural and industrial background graphic to mount
in display, and 3' by 6' vinyl J.W. Speaker banner
Diamondplate Headlight/Worklight Display
Part # DISPLAYDPWORK
• Includes Models 670 XD, 735, 770 XD, 832, 840 XD, 4410, 8700
Evolution, 8800 Low Beam, 8900 & TS3000 lights
• Measures 54" wide x 25.5" tall x 4.75" deep
• Heavy-duty diamondplate construction
• Designed to install into “slatwall” or sit on a flat surface
• Side-by-side mounting bucket for the 8800 and a halogen sealed beam
(sealed beam not included) so customers can compare light output
• Includes power supply and 120V AC plug
• Back-lit J.W. Speaker logo
• Industrial-strength momentary switches to power the lights
• QR codes for smartphone users to scan and access product spec sheets
• Includes 3' by 6' vinyl J.W. Speaker banner
Rotating Headlight/Worklight Display
Part # DISPLAYRTWORK
• Includes Models 405, 670 XD, 735, 770 XD, 832, 840 XD, 850, 4410,
7150, 8700 Evolution, 8800 Low Beam, & 8900 lights
• Measures 16" wide x 76" tall x 16" deep
• Top portion of display rotates approximately 300 degrees
• Lights come pre-mounted on slatwall-ready fixtures
• Sides of display feature slatwall so that you can customize how the lights
appear on the display
• Power supply and wiring are accessible by removing the very top of
the display unit
• Includes power supply and 120V AC plug
• Industrial-strength momentary switches to power the lights
• QR codes for smartphone users to scan and access product spec sheets
• Includes 3' by 6' vinyl J.W. Speaker banner
11
Forward Lighting
Headlights
Model 90
Page 14
Model 515
Page 16
Model 6048
Page 19
Model 6130
Page 20
Model 8415
Page 25
Model 8630
Page 26
Model 8700
Evolution
Page 28
Model 8700
High Beam
Page 30
Model 8770
Page 32
Model 8800
Page 33
Model 8800
High/Low
Page 34
Model 8900
Page 35
Model 832
Page 17
Model 6045
Page 18
Model 6145
Page 22
Model 6150
Page 23
Model 8655
Page 27
Model 9049
Light Bars
Page 36
Model
TS3000R
Page 38
Model
TS3000V
Page 39
Anti-Flicker
Harness
Page 28
Optional Mounting
Assemblies
Page 31
Auxiliary
Lights
Accessories
12
Why Buy J.W. Speaker Forward Lighting?
Superior Optics
A big reason that J.W. Speaker forward lighting products are different is because of our projector-style optics. Our proprietary
“marble” optics and “D” lenses combine to create the perfect engineered beam pattern that puts light exactly where you
need it most without blinding oncoming traffic or wasting light.
Wide Selection
J.W. Speaker Corporation has the broadest range of LED headlights on the market. We’ve got everything from a 90mm
(Model 90) to a 7" round (8700 Evolution) and 5" x 7" (Model 8900). We also have a full range of LED auxiliary lights including
fog lights, light bars, and driving lights. No other company has such a wide selection. No other company knows LED forward
lighting like we do.
Exceeding Standards
The complicated nature of LED headlights leads most manufacturers to choose
between producing LED headlights that either meet on-road standards or are optimized
for maximum visibility. We don't think that customers should have to settle for just one
or the other. While it is considerably more difficult to do this, J.W. Speaker is committed
to designing LED headlights that exceed on-road standards and offer a superior beam
pattern.
In the photographs to the right, you’ll see the beam patterns of two different DOTcompliant low beam headlights. The first is a competitor’s, and the second is J.W.
Speaker’s. Notice how the beam pattern of the competitor's product (despite being
DOT-compliant) is just a narrow band of light. J.W. Speaker's beam pattern, on the
other hand, has a much larger shape and evenly distributes the light to increase visibility.
Meeting on-road standards is certainly important, but you should compare beam
patterns to ensure you’re getting the best LED headlights for your money.
Competitor's DOT-Compliant Beam Pattern
J.W. Speaker's DOT-Compliant Beam Pattern
Peace of Mind
All our LED forward lighting products come backed with our unmatched Lifetime Limited Warranty that covers defects in
materials, components, and workmanship, and applies to the original installation of the light. For more information about our
LED warranty, see page 158.
13
Model 90
3.30"
85.0mm
90mm LED Headlights
3.30"
85.0mm
High Beam
3.56"
90.3mm
5.96"±.25"
151.4mm±6.4mm
Low Beam
4.27"
108.5mm
Light Source: LED
Light Output: 45,000 (High Beam)/ 17,500 (Low Beam)
Max Candelas
Input Voltage: 12-24V DC
Current Draw:
Low Beam: 1.90 Amps @ 12V DC; 0.95 Amps @ 24V DC
High Beam: 0.80 Amps (High Beam);
0.40 Amps (Front Position) @ 12V DC;
0.40 Amps (High Beam);
0.20 Amps (Front Position) @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 7 (Position & Stop),
ECE Reg. 112 (Headlights), Buy America Compliant,
Sealed to IP67
Mounting: Retrofits standard 90mm projector headlights
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
Voltage
Lens
Part #
DOT/ECE RHT High Beam w/ Front Position
Hardcoated Lens
12-24V DC
Polycarbonate
0547751
DOT/ECE RHT Low Beam, No Front Position
Hardcoated Lens
12-24V DC
Polycarbonate
0547761
ECE LHT* Low Beam, No Front Position
Hardcoated Lens
12-24V DC
Polycarbonate
0547801
Replacement Adjuster Kit
8200111
*ECE versions are not available for sale in the U.S.A.
14
Model 90
3.30"
85.0mm
90mm LED Multi-function Lights
3.30"
85.0mm
Turn Signal, DRL
& Front Position
3.56"
90.3mm
5.96"±.25"
151.4mm±6.4mm
DRL & Fog
4.27"
108.5mm
Light Source: LED
Raw Output: 720 Lumens (Fog Light Only)
Effective Output: 350 Lumens (Fog Light Only)
Input Voltage: 12-24V DC
Current Draw:
DRL: 0.60 Amps @ 12V DC; 0.35 Amps @ 24V DC
Fog Beam: 0.80 Amps @ 12V DC; 0.45 Amps @ 24V DC
Front Position: 0.07 Amps @ 12V DC; 0.04 Amps @ 24V DC
Turn Signal: 1.60 Amps @ 12V DC; 1.30 Amps @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 6 (Turn Signal),
ECE Reg. 7 (Front Position), ECE Reg. 87 (DRL), SAE J588
(Turn Signal), SAE J2087 (DRL), Buy America Compliant,
Sealed to IP67
Mounting: Retrofits standard 90mm projector headlights
Special Note: DRL describes the Daytime Running Light
function
Function
Additional Information
Voltage
Lens
Part #
DOT/ECE DRL & Fog
12-24V DC
Polycarbonate
0549501
DOT/ECE Turn Signal, DRL and Front Position
12-24V DC
Polycarbonate
0345591
*ECE versions are not available for sale in the U.S.A.
15
Model 515
4" x 8" LED Material Handling Headlight
7.64"
194.0mm
5.18"
131.6mm
Light Source: LED
Raw Output: 540 Lumens
Effective Output: 420 Lumens
Input Voltage: 12-48V DC
Current Draw:
Low Beam: 0.60 Amps @ 12V DC; 0.30 Amps @ 24V DC;
0.20 Amps @ 36V DC; 0.15 Amps @ 48V DC
Front Position: 0.05 Amps @ 12V DC; 0.05 Amps @ 24V DC;
0.05 Amps @ 36V DC; 0.05 Amps @ 48V DC
Turn Signal: 1.45 Amps @ 12V DC; 0.70 Amps @ 24V DC
0.45 Amps @ 36V DC; 0.40 Amps @ 48V DC
Standards: ECE Reg. 6 (Signal), ECE Reg. 7 (Position &
Stop), ECE Reg. 113 (Headlights), Buy America Compliant,
Sealed to IP67
Mounting: Custom mount
Function
Additional Information
2.93"
74.5mm
3.61"
91.6mm
4.25"
108.0mm
Voltage
Lens
Part #
ECE Low Beam, Front Position & Turn Signal
Black Inner Bezel, Hardcoated Lens
12-48V DC
Polycarbonate
0548901
ECE Low Beam, Front Position & Turn Signal
Chrome Inner Bezel, Hardcoated Lens
12-48V DC
Polycarbonate
0549201
16
Model 832
3.95"
100.4mm
4" x 4" LED Auxiliary Light
3.82"
96.9mm
4.96"
126.0mm
11.67"±0.50"
296.5mm±12.7mm
1.61"
40.8mm
Light Source: LED
Raw Output: 2,400 Lumens
Effective Output: 1,425 Lumens
Input Voltage: 12-24V DC
Current Draw: 2.90 Amps @ 12V DC; 1.36 Amps @ 24V DC
Standards: Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Function
Additional Information
3.37"
85.6mm
Voltage
Lens
Part #
Flood
12-24V DC
Polycarbonate
0545631
Trap
12-24V DC
Polycarbonate
0545621
17
Model 6045
4.5" (PAR36) LED Fog Light
4.40"
112.0mm
4.00"
102.0mm
4.40"
112.0mm
4.10"±0.51"
104.0mm±13.0mm
2.33"
59.2mm
0.57"
14.6mm
Light Source: LED
Raw Output: 750 Lumens
Effective Output: 500 Lumens
Input Voltage: 12V DC
Current Draw: 2.15 Amps @ 12V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), SAE J583 (Fog),
ECE Reg. 19 (Fog), Buy America Compliant
Mounting: Retrofits PAR36 headlights
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
18
Additional Information
Voltage
Lens
Part #
DOT/ECE RHT Fog
Black Inner Bezel, Hardcoated Lens
12V DC
Polycarbonate
0545731
DOT/ECE RHT Fog
Chrome Inner Bezel, Hardcoated Lens
12V DC
Polycarbonate
0546161
Model 6048
5.44"
138.1mm
2" x 5" LED Auxiliary Lights
2.49"
63.2mm
5.0±0.25"
127.0±6.4mm
Fog Light
1.78"
45.1mm
Driving/Spot Light
Light Source: LED
Raw Output: 800 Lumens
Effective Output: 500 (Fog Beam)/ 575 (Driving Beam)/
570 (Spot) Lumens
Input Voltage: 12V or 14V DC
Current Draw: 1.20 Amps @ 12V DC
Standards:
Fog Version: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), SAE J583 (Fog), SAE J1113
(Radiated Emissions), ECE Reg. 10 (Radiated Emissions),
ECE Reg. 19 (Fog), Buy America Compliant, Sealed to IP69K
Driving & Spot Versions: SAE J1113 (Radiated Emissions),
ECE Reg. 10 (Radiated Emissions), Buy America Compliant,
Sealed to IP67
Mounting: Flush mount
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand Traffic
(LHT) describes vehicles that drive on the left-hand side of
the road.
Additional Information
Voltage
Lens
Part #
DOT/ECE RHT Fog
Function
Hardcoated Lens
14V DC
Polycarbonate
0549691
SAE/ECE RHT & LHT Driving
Hardcoated Lens
12V DC
Polycarbonate
0543591
SAE/ECE Spot
Hardcoated Lens
12V DC
Polycarbonate
0548631
19
Model 6130
5.87"
149.0mm
5.28"
134.0mm
4.5" (PAR36) LED Headlights
High Beam
5.67"
144.0mm
Low Beam
3.00"
76.1mm
Driver
3.60"
91.4mm
Light Source: LED
Raw Output: 2,400 (High Beam)/ 1,200 (Low Beam) Lumens
Effective Output: 1,050 (High Beam)/ 525 (Low Beam) Lumens
Input Voltage: 12-24V DC
Current Draw:
Low Beam: 2.25 Amps @ 12V DC; 1.30 Amps @ 24V DC
High Beam: 5.50 Amps @ 12V DC; 2.60 Amps @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 112 (Headlights),
Buy America Compliant, Sealed to IP67
Mounting: Retrofits PAR36 headlights
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
DOT/ECE RHT & LHT High Beam
Light w/ Mounting Bracket
Lens
Part #
Glass
0544591
DOT/ECE RHT Low Beam
Light w/ Mounting Bracket
Driver Required
Glass
0544581
ECE LHT* Low Beam
Light w/ Mounting Bracket
Driver Required
Glass
0545031
LED Driver Assembly for Model 6130
LED Headlight
*ECE versions are not available for sale in the U.S.A.
20
Voltage
Driver Required
0842091
Ultimate Adventure
2014 Official Lighting Sponsor
J.W. Speaker Corporation is proud to be the Official Lighting Sponsor of Ultimate
Adventure 2014! We built a brand new rig specifically for the event, and it handled
like a dream!
Each year Petersen’s 4-Wheel & Off-Road hosts Ultimate Adventure. Petersen’s
selects four readers and their rigs to join the staff, friends, and sponsors of the
magazine for the best 4×4 summer camp/vacation ever. Ultimate Adventure changes
location every year, and isn’t announced until days before the adventure beings. The
thousand-mile road trip includes a challenging four-wheel trail thrown in almost every day. The teams live out of their
rig and cook, camp, and enjoy the great outdoors.
Drivers must come with rigs ready for challenging trails, as there are no bypasses, no way to avoid body damage.
This event isn’t for whiners, and will test the abilities of both the driver and vehicle.
For more pictures from Ultimate Adventure, like us on Facebook at www.facebook.com/jwspeaker.
21
Model 6145
4" LED Fog Light
The Model 6145 is exactly what your Jeep has been missing. The Model 6145 LED fog light is a high-performance
drop-in replacement that retrofits stock Jeep bumper-mounted fog lights, as well as an assortment of other vehicles.
The retrofit is an easy plug-and-play installation on many models, and requires simple wire splicing on others (see
chart below for specifics).
Plug & Play
Splicing Required
• 2007-2010 Jeep Wrangler
• 2009 Dodge Journey
• 2005-2008 Dodge Magnum
• 2006-2010 PT Cruiser
• 2011-2012 Jeep Wrangler
• 2010-2012 Dodge Journey
• 2011-2012 Jeep Grand Cherokee
• 2011-2012 Dodge Charger
• 2005 Chrysler 300
Note: The Model 6145 is not compatible with 2013 Jeep Wrangler Rubicon 10th Anniversary Edition.
For the most current retrofit information, please visit the Model 6145 product page at www.jwspeaker.com.
Utilizing state-of-the-art optics, the Model 6145 provides superior visibility and surpasses DOT, ECE, and Transport
Canada standards for on-road use. The hardcoated polycarbonate lens and heavy duty die-cast aluminum housing
make the Model 6145 extremely durable. It comes with a Lifetime Limited Warranty and is available in your choice of
black or chrome finish.
22
Model 6145
4.11"
104.3mm
4" LED Fog Light
2.36"
60.0mm
3.33"
84.6mm
1.70"
43.2mm
3.48"
88.3mm
3.95"
100.4mm
Light Source: LED
Raw Output: 1,080 Lumens
Effective Output: 610 Lumens
Input Voltage: 12V DC
Current Draw: 1.60 Amps @ 12V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), SAE J583 (Fog), SAE J1113
(Radiated Emissions), ECE Reg. 10 (Radiated Emissions),
ECE Reg. 19 (Fog), Buy America Compliant
Mounting: In-bumper mount (see previous page for details)
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
Voltage
Lens
Part #
DOT/ECE RHT & LHT Fog
Black Inner Bezel, Hardcoated Lens
12V DC
Polycarbonate
0547971
DOT/ECE RHT & LHT Fog
Chrome Inner Bezel, Hardcoated Lens
12V DC
Polycarbonate
0547941
23
Model 6150
3.95"
100.4mm
4" LED Fog Light
4.77"
121.2mm
5.10"
130.1mm
Light Source: LED
Raw Output: 1,080 Lumens
Effective Output: 610 Lumens
Input Voltage: 12V DC
Current Draw: 1.60 Amps @12V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), SAE J583 (Fog), SAE J1113
(Radiated Emissions), ECE Reg. 10 (Radiated Emissions),
ECE Reg. 19 (Fog), Buy America Compliant
Mounting: Universal pedestal mount
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
2.69"
68.3mm
Additional Information
Voltage
Lens
Part #
DOT/ECE RHT & LHT Fog
Black Housing, Chrome Inner Bezel, Hardcoated Lens
12V DC
Polycarbonate
0547951
DOT/ECE RHT & LHT Fog
Black Housing, Black Inner Bezel, Hardcoated Lens
12V DC
Polycarbonate
0547981
12V DC
Polycarbonate
0548991
DOT/ECE RHT & LHT Fog Silver Housing, Chrome Inner Bezel, Hardcoated Lens
24
Model 8415
DIA.4.33"
110.0mm
4.5" (PAR36) LED Headlights
4.71"
119.7mm
High-Low Beam
4.38"
111.5mm
1.75
44.6mm
1.05
26.7mm
3.14
80.0mm
Low Beam Only
Light Source: LED
Raw Output:
High/Low Version: 1,000 (High Beam)/
600 (Low Beam) Lumens
Low Beam Only Version: 540 Lumens
Effective Output:
High/Low Version: 570 (High Beam)/ 350 (Low Beam) Lumens
Low Beam Only Version: 420 Lumens
Input Voltage: 12V DC
Current Draw:
High/Low Version: 1.70 Amps @ 12V DC
Low Beam Only Version: 0.85 Amps @ 12V DC
Standards: SAE J1623 (All-Terrain Headlights), ECE Reg. 113
(Headlights), Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Special Note: Please note that this product is not approved
for on-road use
Additional Information
Voltage
Lens
Part #
SAE/ECE High/Low Beam
Function
Light w/ Adjustable Mount, Hardcoated Lens
12V DC
Polycarbonate
0547701
SAE/ECE High/Low Beam
Light w/ Universal Panel Mount, Hardcoated Lens
12V DC
Polycarbonate
0547031
SAE/ECE Low Beam
Light w/ Universal Panel Mount, Hardcoated Lens
12V DC
Polycarbonate
0545911
25
Model 8630
DIA 5.64"
143.5mm
5.75" (PAR46) LED Headlight
3.40"
86.4mm
0.50"
12.85mm
2.76"±0.25
70.1±6.4mm
2.15"
54.80mm
Light Source: LED
Raw Output: 1,200 Lumens
Effective Output: 650 (High Beam)/
600 (Low Beam) Lumens
Input Voltage: 12-24V DC
Current Draw: 2.00 Amps @ 12V; 1.00 Amps @ 24V
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 7 (Position &
Stop), ECE Reg. 112 (Headlights), ECE Reg. 10 (Radiated
Emissions), Buy America Compliant, Sealed to IP67
Mounting: Retrofits PAR46 headlights
Special Notes: This headlight was not designed for
motorcycle applications and may not fit a standard
motorcycle bucket. Right Hand Traffic (RHT) describes
vehicles that drive on the right-hand side of the road. Left
Hand Traffic (LHT) describes vehicles that drive on the lefthand side of the road.
Mining Haul
Truck Retrofit Kit
6.50"
166.0mm
3.52"
89.4mm
11.9"±0.20"
304.8mm±6.9mm
1.60"
41.0mm
Function
Additional Information
Voltage
Lens
Part #
DOT High Beam
Hardcoated Lens
12-24V DC
Polycarbonate
0547051
DOT High Beam
Mining Haul Truck Retrofit Kit
Included, Hardcoated Lens
12-24V DC
Polycarbonate
0547671
Hardcoated Lens
12-24V DC
Polycarbonate
0545741
ECE LHT* Front Position High/Low Beam
12-24V DC
Glass
0546331
ECE RHT* Front Position High/Low Beam
12-24V DC
Glass
0546341
DOT High/Low Beam
*ECE versions are not available for sale in the U.S.A.
26
Model 8655
5.75" (PAR46) LED Auxiliary Light
7.64"
194.1mm
4.52"
114.7mm
Light Source: LED
Raw Output: 4,800 Lumens
Effective Output: 3,000 Lumens
Input Voltage: 12-24V DC
Current Draw: 7.60 Amps @ 12V DC; 3.20 Amps @ 24V DC
Standards: IEC 60529, Buy America Compliant,
Sealed to IP67
Mounting: Universal pedestal mount
Function
Additional Information
1.99"
50.5mm
5.91"
150.2mm
Voltage
Lens
Part #
Flood
12-24V DC
Glass
0547551
Trap
12-24V DC
Glass
0547541
27
Model 8700 Evolution
7" (PAR56) LED Headlight
Voted the most innovative product of 2012 by OEM Off-Highway Magazine, the Model 8700 Evolution is a highperformance LED headlight that’s taken the lighting market by storm. The Model 8700 Evolution features projectorstyle optics for superior visibility, state-of-the-art electronics for unmatched longevity, and sturdy construction for
rugged durability. If you’re looking for premium performance and a unique look, the Model 8700 Evolution is a
perfect upgrade!
The Model 8700 Evolution, like most of our LED headlights, is available in a variety of different configurations.
Regardless of where in the world you live, we have a version of the Model 8700 Evolution that meets your on-road
requirements. Additionally, you have your choice of either a black or chrome finish.
New for 2014: Anti-Flicker Harness
J.W. Speaker now has an Anti-Flicker Harness to address Pulse
Width Modulation (PWM) issues with newer model year Jeeps.
PWM describes the pulsing of power to the headlights from the
Jeep electrical system in order to save bulb life. Because bulbs are
not as responsive as LEDs, there’s no noticeable effect from PWM.
LEDs, however, are incredibly responsive, so they sometimes
appear to flicker when installed on systems with PWM. The AntiFlicker Harness directs power to the LED headlights in a constant,
steady flow—eliminating the flicker caused by PWM.
Please note that the J.W. Speaker anti-flicker harness is the only approved harness for use with J.W.
Speaker lights. Damage caused from using non-J.W. Speaker harnesses is not covered under warranty.
28
Model 8700 Evolution
7" (PAR56) LED Headlight
6.95"
176.5mm
ECE Version w/
Front Position
3.87"
98.3mm
0.51"
13.2mm
2.20"
56.0mm
6.82"±0.50"
173.1mm±12.7mm
DOT Version
Light Source: LED
Raw Output: 1,350 (Low Beam)/ 1,770 (High Beam) Lumens
Effective Output: 650 (Low Beam)/ 760 (High Beam) Lumens
Input Voltage: 12-24V DC
Current Draw: 2.50 Amps @ 12V DC; 1.30 Amps @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 112 (Headlights),
MIL-STD-461, Buy America Compliant, Sealed to IP67
Mounting: Retrofits PAR56 headlights
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Voltage
Lens
Part #
DOT High/Low Beam, No Front Position
Function
Black Inner Bezel, Hardcoated Lens
Additional Information
12-24V DC
Polycarbonate
0547331
DOT High/Low Beam, No Front Position
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547891
ECE LHT* High/Low Beam, No Front Position
Black Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0548341
ECE LHT* High/Low Beam, No Front Position
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0548351
ECE LHT* High/Low Beam, w/ Front Position
Black Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547341
ECE LHT* High/Low Beam, w/ Front Position
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547901
ECE RHT* High/Low Beam, No Front Position
Black Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0548361
ECE RHT* High/Low Beam, No Front Position
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0548371
ECE RHT* High/Low Beam, w/ Front Position
Black Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547351
ECE RHT* High/Low Beam, w/ Front Position
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547911
H4/H13 Jumper Harness
Anti-Flicker Harness
3266081
Eliminates Flickering due to PWM
8000311
*ECE versions are not available for sale to US customers.
29
Model 8700 High Beam
DIA 7.01"
178.1mm
7" (PAR56) LED Headlight
0.50"
12.7mm
4.46"
113.3mm
2.81"
71.5mm
6.68"
169.8mm
3.40"
88.6mm
3.62"
92.0mm
Light Source: LED
Raw Output: 1,900 Lumens
Effective Output: 950 Lumens
Input Voltage: 12-24V DC
Current Draw: 4.00 Amps @ 12V DC; 2.00 Amps @ 24V DC
Standards: ECE Reg. 10 (Radiated Emissions), ECE Reg. 112
(Headlights), Buy America Compliant, Sealed to IP67
Mounting: Retrofits PAR56 headlights
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
Lens
Part #
ECE RHT & LHT* High Beam
Black Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547811
ECE RHT & LHT* High Beam
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0545781
*ECE versions are not available for sale in the U.S.A.
30
Voltage
7.06"
179.3mm
Optional Mounting Buckets & Assemblies
Chrome Point Mount Bucket
for Model 8700
Ring Kit Mounting Assembly
for Model 8700
6.29"
159.9mm
8.30"
210.8mm
6.38"
162.0mm
2.96"
75.2mm
1.00"
25.4mm
8.30"
210.8mm
8.21"
208.6mm
7.12"
180.8mm
5.68"
144.2mm
Side Mount Bucket
for Model 8700
1.79"
45.5mm
Single Ring Assembly
for Model 8630
4.10"
8.59"
104.0mm
218.1mm
1.42"
36.0mm
2.96"
75.2mm
7.91"
201.0mm
2.28"
57.9mm
2.96"
75.2mm
1.00"
25.4mm
8.30"
210.8mm
2.96"
75.2mm
7.12"
180.8mm
7.87"
200.0mm
1.79"
45.5mm
7.17"
182.0mm
Panel Mount Bucket
for Model 8700
Double Ring Assembly
for Model 8630
2.28"
57.9mm
13.50"
342.9mm
6.25"
158.7mm
4.90"
124.3mm
8.59"
218.1mm
7.25"
184.1mm
7.51"
190.8mm
1.00"
25.4mm
0.34"±0.20"
8.6mm±0.5mm
Firetruck Ring Kit Mounting Assembly
for Model 8630
1.00"
25.4mm
2.00"
50.1mm
3.00"
74.9mm
5.40"
137.0mm
1.80"
45.5mm
1.80"
45.5mm
6.70"
169.0mm
3.00"
74.9mm
2.60"
65.0mm
2.60"
65.0mm
3.00"
74.9mm
Description
Part #
Chrome Point Mount Bucket Assembly for Model 8700
3157021
Side Mount Bucket Assembly for Model 8700
3157091
Panel Mount Bucket Assembly for Model 8700
3156561
Fire Truck Mounting Assembly for Model 8630
3156351
Ring Kit Mounting Assembly for Model 8700 (Required for most motorcycle applications)
3156351
Single Ring Kit Mounting Assembly for Model 8630
8200001
Double Ring Kit Mounting Assembly for Model 8630
3157751
31
Model 8770
7" (PAR 56) LED Locomotive Light
DIA 6.94"
176.5mm
4.00"
102.5mm
0.50"
12.9mm
2.38"
60.5mm
6.64"
168.9mm
Light Source: LED
Light Output: 200,000 Candelas
Input Voltage: 75V DC
Current Draw: 0.73 Amps @ 75V DC
Wiring: Standard Sealed Beam Style Screw Terminals
Standards: FRA Title 49 CFR 229.125 (a), (b), and (d)
(2) (Combined Spec for Headlights & Ditch Lights), Buy
America Compliant, Sealed to IP66
Mounting: Retrofits PAR56 headlights & ditch lights
Special Note: This product is only intended for use on
locomotives and does not meet any on-road requirements
Function
Headlight/Ditch Light
32
Additional Information
Voltage
Lens
Part #
75V DC
Glass
0547691
Model 8800
7.00"
167.6mm
4" x 6" LED Low Beam & High Beam Headlights
4.22"
107.2mm
High Beam
Pedestal Mount
3.89"
98.9mm
3.64"±0.50"
98.9mm±12.70mm
4.15"
105.3mm
Low Beam
Panel Mount
Light Source: LED
Raw Output: 1,300 Lumens
Effective Output: 850 (High Beam)/ 750 (Low Beam) Lumens
Input Voltage: 12-24V DC
Current Draw: 3.60 Amps @ 12V DC; 1.50 Amps @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 112 (Headlights),
Buy America Compliant, Sealed to IP67
Mounting: Retrofits 1A1 and 2A1 (4" x 6") sealed beam
headlights
Double Bucket
Mounting Assembly
15.62"
396.7mm
4.40"
111.7mm
6.50"
165.1mm
Function
Additional Information
Voltage
Lens
Part #
DOT/ECE RHT High Beam
Hardcoated Lens
12-24V DC
Polycarbonate
0547071
DOT/ECE RHT Low Beam
Hardcoated Lens
12-24V DC
Polycarbonate
0547061
Optional Double Bucket Mounting Assembly - RH
3156600
Optional Double Bucket Mounting Assembly - LH
3156680
33
Model 8800 High/Low
6.60"
169.0mm
4" x 6" LED High/Low Beam Headlight
5.10"
129.8mm
4.70"
120.1mm
4.00"
102.3mm
4.00"
103.2mm
71.90"±6.40"
1.82m±169.0mm
Light Source: LED
Raw Output: 1,900 Lumens
Effective Output: 750 (High Beam)/ 725 (Low Beam) Lumens
Input Voltage: 12-24V DC
Current Draw: 2.50 Amps @ 12V DC; 1.30 Amps @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), MIL-STD-461 (EMI),
SAE J2139 (Signal), SAE J578 (Color Spec), SAE J1455
(Environmental), SAE J575 (Headlights), Buy America
Compliant, Sealed to IP67
Mounting: This product requires a custom bucket—it was not
designed to retrofit standard 4" x 6" sealed beam headlights
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
Lens
Part #
DOT High/Low Beam
Hardcoated Lens
12-24V DC
Polycarbonate
0547851
ECE LHT* High/Low Beam
Hardcoated Lens
12-24V DC
Polycarbonate
0546241
Hardcoated Lens
12-24V DC
Polycarbonate
0545231
ECE RHT* High/Low Beam
*ECE versions are not available for sale in the U.S.A.
34
Voltage
Model 8900
7.87"
200.0mm
5" x 7" LED High/Low Headlight
5.59"
142.0mm
3.74"
95.0mm
4.68"±0.50"
118.9mm±12.70mm
1.15"
29.2mm
Light Source: LED
Raw Output: 1,770 (High Beam)/ 1,350 (Low Beam) Lumens
Effective Output: 850 (High Beam)/ 650 (Low Beam) Lumens
Input Voltage: 12-24V DC
Current Draw: 4.30 Amps @ 12V DC; 2.20 Amps @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 7 (Position &
Stop), ECE Reg. 112 (Headlights-Class B-ECE Versions),
Buy America Compliant, Sealed to IP67
Mounting: Retrofits standard 5" x 7" headlights
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
DOT High/Low Beam, No Front Position
Black Inner Bezel, Hardcoated Lens
DOT High/Low Beam, No Front Position
Chrome Inner Bezel, Hardcoated Lens
Voltage
Lens
Part #
12-24V DC
Polycarbonate
0548201
12-24V DC
Polycarbonate
0546571
ECE LHT* High/Low Beam, No Front Position Black Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0548211
ECE LHT* High/Low Beam w/ Front Position
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547271
ECE RHT* High/Low Beam, No Front Position
Black Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0548221
ECE RHT* High/Low Beam w/ Front Position
Chrome Inner Bezel, Hardcoated Lens
12-24V DC
Polycarbonate
0547261
Optional Single Bucket Mounting Assembly
3157041
*ECE versions are not available for sale in the U.S.A.
35
Model 9049
LED Light Bars
J.W. Speaker’s Model 9049 LED light bars are an ideal choice for off-roading, military, or construction use. The
solid-state LEDs are resistant to shock and vibration that cause bulb-based lights to prematurely fail. Additionally,
the rugged metal frame provides a level of durability that rivals any light bar on the market. The Model 9049 is
available with your choice of 2-, 3-, 4-, or 6-modules. The 3-module version is brand new for 2014 and features a
fog beam pattern.
All J.W. Speaker light bars come with a Lifetime Limited Warranty against defects in materials, components, and
workmanship. To learn more about our warranty, see page 158.
18.80"
477.5mm
22.20"
563.9mm
2.75"
69.9mm
36.00"±1.00"
914.4mm±25.4mm
4.05"
102.9mm
25.25"
641.3mm
2.00"
50.4mm
1.00"
25.4mm
3.67"
93.3mm
4.05"
103.0mm
28.65"
727.7mm
4.05"
102.8mm
27.89"
708.4mm
2.88"
73.1mm
41.47"
1053.3mm
1.00"
25.4mm
40.70"
1033.9mm
Optional Remote Control Configuration
If you don’t want to bother with in-cab controls, our 4-module programmable configuration
may be the perfect solution for you. This unique version, which is different from our standard
4-module light bar, comes paired with a programmable key fob allowing you to cycle through
various combinations of lights–all with the press of a button! One key fob comes standard,
however, additional fobs can be ordered at the time you purchase the light bar.
36
Model 9049
LED Light Bars
Light Source: LED
Raw Output:
2,000 Lumens (2-Module); 2,400 Lumens (3-Module);
4,400 Lumens (4-Module); 6,600 Lumens (6-Module)
Effective Output:
1,320 Lumens (2-Module); 1,500 Lumens (3-Module);
2,640 Lumens (4-Module); 3,960 Lumens (6-Module)
Input Voltage: 12V or 24V DC
Current Draw:
2-Module: 4.00 Amps @ 12V DC; 2.40 Amps @ 24V DC
3-Module: 3.60 Amps @ 12V DC
4-Module: 8.00 Amps @ 12V DC; 4.80 Amps @ 24V DC
6-Module: 12.00 Amps @ 12V DC; 7.20 Amps @ 24V DC
Standards: SAE J1113 (Radiated Emissions-Class 21),
ECE Reg. 10 (Radiated Emissions), Buy America Compliant
Mounting: Universal pedestal mount
4.05"
103.0mm
15.72"
399.2mm
2.88"
73.0mm
1.00"
25.4mm
14.95"
379.8mm
Function
Additional Information
Voltage
Lens
Part #
SAE/ECE Driving
2-Module, No Wireless Functionality, Hardcoated Lens
12V DC
Polycarbonate
0548461
SAE/ECE Driving
4-Module, No Wireless Functionality, Hardcoated Lens
12V DC
Polycarbonate
0546021
SAE/ECE Driving
6-Module, No Wireless Functionality, Hardcoated Lens
12V DC
Polycarbonate
0548451
SAE/ECE Flood
2-Module, No Wireless Functionality, Hardcoated Lens
12V DC
Polycarbonate
0546261
SAE/ECE Flood
2-Module, No Wireless Functionality, Hardcoated Lens
24V DC
Polycarbonate
0546281
SAE/ECE Flood
4-Module, No Wireless Functionality, Hardcoated Lens
12V DC
Polycarbonate
0545331
SAE/ECE Flood
4-Module, No Wireless Functionality, Hardcoated Lens
24V DC
Polycarbonate
0546291
SAE/ECE Flood
4-Module w/ Wireless Functionality & Key Fob,
Hardcoated Lens
12V DC
Polycarbonate
0545321
SAE/ECE Flood
6-Module, No Wireless Functionality, Hardcoated Lens
12V DC
Polycarbonate
0546271
SAE/ECE Flood
6-Module, No Wireless Functionality, Hardcoated Lens
24V DC
Polycarbonate
0546301
3-Module Fog Light Bar, No Wireless Functionality,
Hardcoated Lens
12V DC
Polycarbonate
0549281
SAE/ECE Fog
Key Fob
Required for Wireless Functionality
0842221
37
Model TS3000R
7.65"
194.22mm
6" LED Driving Light
4.69"
119.00mm
4.76"
120.93mm
2.25"
56.95mm
Light Source: LED
Light Output: 60,000 (Driving Beam)/
117,500 (Pencil Beam) Max Candelas
Input Voltage: 12-24V DC
Current Draw: 2.80 Amps @ 12V DC; 1.40 Amps @ 24V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 112 (HeadlightsClass B-Driving Beam Version), Buy America Compliant,
Sealed to IP67
Mounting: Universal pedestal mount
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
Voltage
Lens
Part #
DOT Driving Beam
Silver Housing
12-24V DC
Glass
0546921
DOT Driving Beam
Black Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0548381
DOT Driving Beam
Silver Housing, Hardcoated lens
12-24V DC
Polycarbonate
0547591
ECE RHT & LHT* Driving Beam
Black Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0548391
ECE RHT & LHT* Driving Beam
Silver Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0548011
Pencil Beam
Black Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0548401
Pencil Beam
Silver Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0547601
Optional Amber Lens Cover
5862921
Optional Black Logo Lens Cover
5862931
Optional Blue Lens Cover
5862911
Optional Clear Lens Cover
5862901
*ECE versions are not available for sale in the U.S.A.
38
ø5.92"
150.21mm
Model TS3000V
5" x 7" LED Driving Light
1.77"
44.8mm
4.15"
105.5mm
4.67"
118.5mm
11.5"±1.00"
290.6mm±25.4mm
1.30"
33.0mm
6.55"
166.3mm
Light Source: LED
Light Output: 60,000 (Driving Beam)/
117,500 (Pencil Beam) Max Candelas
Input Voltage: 12-24V DC
Current Draw:
Driving Beam: 3.25 Amps @ 12V DC; 1.50 Amps @ 24V DC
Pencil Beam: 3.70 Amps @ 12V DC; 1.65 Amps @ 24V DC
Standards: FMVSS 108, DOT Compliant CMVSS 108,
(Transport Canada Compliant), ECE Reg. 112
(Headlights-Class B-Driving Beam Version), Buy America
Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Special Notes: Right Hand Traffic (RHT) describes vehicles
that drive on the right-hand side of the road. Left Hand
Traffic (LHT) describes vehicles that drive on the left-hand
side of the road.
Function
Additional Information
DOT Driving Beam
Black Housing, Hardcoated Lens
DOT Driving Beam
Voltage
Lens
Part #
12-24V DC
Polycarbonate
0547711
Silver Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0547321
ECE RHT & LHT* Driving Beam
Silver Housing
12-24V DC
Glass
0546321
ECE RHT & LHT* Driving Beam
Black Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0547721
ECE RHT & LHT* Driving Beam
Silver Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0547521
Pencil Beam
Silver Housing
12-24V DC
Glass
0546371
Pencil Beam
Silver Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0547531
Pencil Beam
Black Housing, Hardcoated Lens
12-24V DC
Polycarbonate
0547921
Optional Amber Lens Cover
5862501
Optional Black Logo Lens Cover
5861391
Optional Blue Lens Cover
5862511
Optional Clear Lens Cover
5862361
Optional Inverted Black Logo Lens Cover
5862351
*ECE versions are not available for sale in the U.S.A.
39
Worklights
Portable
High Intensity
(2,000+ Effective Lumens)
Model 60
Page 44
Model 523
Portable
Page 47
Model 523
Page 48
Model 523 XL
Page 49
Model 524
Page 51
Model 526 XL
Page 52
Model 623
Page 54
Model 735
Page 59
Model 735 XL
Page 60
Model 832
Page 71
Model 832 XL
Page 72
Model 7150
Page 82
Model 7150 XL
Page 83
Model 7151
Page 84
Model 523
Tripod
Page 50
Model 8475
Page 86
Models
9710/9720
Page 88
Medium-High
Intensity
Model 70
Page 46
Model 660
Page 56
Model 670 XD
Page 57
Model 680 XD
Page 58
Model 736
Page 61
Model 770 XD
Page 62
Model 771 XD
Page 63
Model 776 XD
Page 65
Model 806
Page 70
Model 840 XD
Page 73-75
Model 6020
Page 80
Model 6040
Page 81
Model 775 XD
Page 64
Model 778
Page 66
Model 803
Page 69
Model 4410
Page 78
(700-1,999 Effective Lumens)
Standard-Medium
Intensity
Model 880 XD
Page 76
Model 781
Page 67
(< 700 Effective Lumens)
40
Model 4410 XL
Page 79
Model 881 XD
Page 77
Model 783
Page 68
Why Buy J.W. Speaker Worklights?
Wide Selection
There’s never been a better time to improve visibility and increase safety! J.W. Speaker’s broad range of LED worklights
provides you with a wide selection of high-performance lighting upgrades that spans a variety of different shapes and sizes.
Inside this catalog, you’ll find everything from portable handheld units to high-output scene lights.
Superior Visibility
Many lighting companies focus on maximizing light output when creating a worklight. While light output is essential, you
should not underestimate the importance of an optimized beam pattern. J.W. Speaker worklights are engineered to provide
maximized light output and our beam patterns are specifically designed to meet the needs and challenges of our customers.
Extreme Durability
We understand just how ruthless your work environment can be, which is why we’ve designed our LED worklights to be
extremely durable. We put them through an extensive series of tests to ensure that they continue to perform under the most
unforgiving conditions; our XD Series has even survived a number of torture tests that you can watch online (see next page
for details). You can count on J.W. Speaker LED worklights to meet the demands of your harsh work environment—it’s what
they’re made for.
Unmatched Longevity
Our LED worklights are built to last 300+ times longer than incandescent, 50+ times longer than halogen, and 20+ times
longer than HID-based worklights. To back up this claim, all of our LED worklights (unless otherwise noted) come with a
Lifetime Limited Warranty which you can read about on page 158.
41
The XD Series
LED Worklights
J.W. Speaker’s new XD Series represents an innovation in LED worklight technology. The perfect marriage of form
and function, the XD Series features a proprietary housing which enhances performance, simplifies installation, and
increases durability.
The XD Series is characterized by a unique, thermally-conductive polycarbonate housing that’s been specifically
designed to maximize the performance of the LEDs. XD Series LED worklights are compact, lightweight, corrosionand impact-resistant, making them the perfect choice for rough and rugged applications.
Not Convinced?
Not convinced that a polycarbonate LED worklight is durable enough for your application?
Scan the QR code below, or go to our YouTube channel (JWSpeakerCorporation), and watch our XD Series Torture
Test video and decide for yourself.
Look for this logo to know that
the product you’re looking at is
part of the XD Series.
42
The XL Series
LED Worklights
J.W. Speaker's XL Series is an extra heavy duty collection of LED worklights that were developed specifically for
extreme industrial conditions. Aside from their uniform yellow housing, each member of the XL Series is fully sealed
to comply with IP69K for high pressure washing and other harsh environmental factors.
What is IP69K?
An IP69K rating indicates that the product has passed testing for high-pressure,
high-temperature wash-down applications. Such enclosures must not only be
dust tight (IP6_), but also able to withstand high-pressure and steam cleaning.
To pass the test, the light sits on a turntable that rotates once every 12 seconds
(5rpm), while a spray nozzle that is fed with 80°C water at 8–10MPa (80–100bar)
and a flow rate of 14–16L/min is held 10–15 cm from the tested light at angles
of 0°, 30°, 60° and 90° for 30 seconds each. This test ensuring that every angle,
nook, and cranny of the XL Series lights are completely sealed and protected.
When you see this logo, it indicates
that the product is part of the XL
series, and you know it’s tough.
43
Model 60
Portable LED Scene Light System
Powerful Performance
The bank of 30 high intensity LEDs on the Model 60 delivers a massive 3,000 Raw
Lumens which is designed to provide a bright, white light to illuminate your work
area. The Model 60 has five different brightness levels and a unique 3-stage optical
system which enables you to adjust from full flood to full spot beam.
Positive Locking Head Unit
The ratcheting head unit clamp maintains the head unit’s orientation, even in highvibration applications.
Compact Coil Cord
The heavy duty coil cord extends the full height of the lamp mast (6ft / 1.8m). When
the light head is locked in the down position the coil cord retracts down to just 16
inches (400mm).
Extendable Mast
Four re-enforced fiberglass mast sections push and lock into each other to form a
strong and stable support for the light head. When not in use, they can be stored
inside the base of the unit.
Durable Outer Housing & Internal Steel Chassis
The Model 60 is designed to withstand the rough conditions of worksites and trade
environments. An internal steel chassis provides superior strength and rigidity.
Waterproof Power Outlet
The power outlets on the Model 60 are
waterproof, making this portable scene light fully
functional even in heavy rain. Additionally, the
plugs lock on to prevent accidental disconnection.
Integrated Charging Port
The charging system monitors vehicle “on” status to
prevent discharging of vehicle battery and ambient
temperature to optimize charging for maximum
battery performance.
Long Battery Life
The internal battery lasts for 8 hours at 100%
power, 16 hours at 50% power, 33 hours at 25%
power, and 240+ hours at 8% power (flash mode).
Short Charge Time
Integrated Tripod Stabilizer Legs
The Model 60 has extendable integrated tripod stabilizer legs that fold
away when not in use. The use of these stabilizers is optional, giving you
added stability when needed.
A full recharge only takes 4 hours using the built-in
vehicle charger, or 6 hours using the optional AC
charger.
Optional Remote Configuration
The Model 60 is also available in a remote control configuration. The compact, lightweight remote is perfect for pockets and overalls,
giving you easy access to lighting modes, brightness, and power. The remote control allows for multiple units to communicate between
each other. The signal from the remote is relayed from one unit to the next, allowing you to control multiple units across long distances.
Note: Remote control only works with remote-enabled Model 60 units.
44
Model 60
Portable LED Scene Light System
71.7"
1,820.7mm
20.1"
511.1mm
27.6"
708.7mm
8.37"
212.6mm
16.66"
423.2mm
Light Source: LED
Raw Output: 3,600 Lumens
Effective Output: 1,700 Lumens
Input Voltage: 12V AC
Weight: 26 lbs
Standards: CE Recognized, Sealed to IP54
Special Note: This product is manufactured in Europe and
comes with a 2-year limited warranty
Pattern
Additional Information
10.08"
256.0mm
Voltage
Lens
Part #
Flood
Integrated DC Charger Included
Battery Powered
Acrylic
0547141
Flood
Integrated DC Charger & Remote Included
Battery Powered
Acrylic
0547171
Wall Charger for Model 60
120-240V AC
6600651
45
Model 70
7.87"
200.0mm
1.38"
35.0mm
Loading Bay Arm with LED Worklight
180°
Horizontal
Rotation
90°
90°
26.97"
685.0mm
30.51"
775.0mm
180°
Horizontal
Rotation
Box Section:
1.50" x 75.0"
38.1mm x 19.1mm
57.48"
1,460.0mm
Light Source: LED
Raw Output: 2,700 Lumens
Effective Output: 1,400 Lumens
Input Voltage: 120V AC
Current Draw: 2.95 @ 12V DC
Standards: UL Recognized, CE Recognized,
RoHS (Arm Only), Sealed to IP67 (Light Only)
Mounting: Wall mount
Special Note: This product is manufactured in Europe and
comes with a 2-year limited warranty
Pattern
Vertical Flood
46
Additional Information
Voltage
Lens
Part #
12V DC
Polycarbonate
1705691
Model 523 Portable
11.30"
286.9mm
8" x 9" Portable LED Scene Light
10.99"
279.2mm
5.00"
127.0mm
Light Source: LED
Raw Output: 8,100 Lumens
Effective Output: 3,900 Lumens
Input Voltage: 12V DC or 120V AC
Current Draw: 8.00 Amps @ 12V DC; 0.60 Amps @ 120V AC
Standards: Buy America Compliant, Sealed to IP67
Magnetic Scene Light Kit
Pattern
Additional Information
Voltage
Lens
Part #
Medium Flood
Rubber Feet, No Carrying Case
120V AC
Polycarbonate
0545531
Narrow Flood
Rubber Feet, No Carrying Case
120V AC
Polycarbonate
0545521
Wide Flood
Magnetic Scene Light Kit Includes: Magnetic Feet,
10m Vehicle Charging Cord, and Carrying Case
12V DC
Polycarbonate
0546251
Wide Flood
Rubber Feet, No Carrying Case
120V AC
Polycarbonate
0545451
47
Model 523
9.99"
253.8mm
8" x 9" LED Side Mount Scene Light
6.99"
177.6mm
3.50"
88.9mm
1.75"
44.5mm
Light Source: LED
Raw Output: 8,100 Lumens
Effective Output: 3,900 Lumens
Input Voltage: 12V or 24V DC; 120V or 240V AC
Current Draw: 7.50 Amps @ 12V DC; 4.00 Amps @ 24V DC;
0.60 Amps @ 120V AC; 0.60 Amps @ 240V AC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
48
Additional Information
Voltage
Lens
Part #
Medium Flood
12V DC
Glass
0544651
Medium Flood
24V DC
Glass
0544661
Medium Flood
120V AC
Glass
0544671
Medium Flood
240V AC
Glass
0546811
Narrow Flood
12V DC
Glass
0544551
Narrow Flood
24V DC
Glass
0544561
Narrow Flood
120V AC
Glass
0544571
Narrow Flood
240V AC
Glass
0546801
Wide Flood
12V DC
Glass
0543841
Wide Flood
24V DC
Glass
0543871
Wide Flood
120V AC
Glass
0543761
Wide Flood
240V AC
Glass
0546821
Model 523 XL
9.99"
253.8mm
8" x 9" LED Side Mount Scene Light
6.99"
177.6mm
3.50"
88.9mm
1.75"
44.5mm
Light Source: LED
Raw Output: 12,200 Lumens
Effective Output: 8,000 Lumens
Input Voltage: 12V or 24V DC
Current Draw: 11.00 Amps @ 12V DC; 5.00 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Additional Information
Voltage
Lens
Part #
Narrow Flood
12-24V DC
Glass
0549641
Wide Flood
12-24V DC
Glass
0549631
49
Model 523 Tripod
8.70"
221.0mm
8"x 9" LED Scene Light Kit with Tripod
2.48"
63.0mm
8.00'
2.44m
3.50"
88.9mm
11.63"
295.4mm
Light Source: LED
Raw Output: 8,100 Lumens
Effective Output: 3,900 Lumens
Input Voltage: 120V AC
Current Draw: 0.60 Amps @ 120V AC
Standards: Buy America Compliant, Sealed to IP67
Mounting: Tripod mount
Special Notes: Tripod is 32" retracted, and extends to 30"
or 70" tall. LED scene light comes with a Lifetime Limited
Warranty. The tripod comes with a 1-year limited warranty.
Pattern
Wide Flood
50
Additional Information
9.55"
242.6mm
Voltage
Lens
Part #
120V AC
Polycarbonate
0544021
Model 524
8.70"
221.0mm
8" x 9" LED Panel Mount Scene Light
6.13"
155.6mm
2.60"
66.0mm
2.28"
58.0mm
Light Source: LED
Raw Output: 8,100 Lumens
Effective Output: 3,900 Lumens
Input Voltage: 12V or 24V DC
Current Draw: 8.00 Amps @ 12V DC; 4.00 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: ETL Conformance to UL 2108, ETL Conformance
to CSA C22 No. 250.0, Buy America Compliant,
Sealed to IP67
Mounting: Panel mount
Voltage
Lens
Part #
Wide Flood
Pattern
Additional Information
12V DC
Glass
0543851
Wide Flood
24V DC
Glass
0543881
51
Model 526 XL
6" x 6" LED Worklight
J.W. Speaker’s new Model 526 XL was designed as a lighting upgrade for mining haul trucks. It is available in four
different beam patterns—flood, trapezoid, spot, or the new Anti-Glare beam.
The haul truck low beam version of the Model 526 XL was designed to address some of the challenges experienced
by mining haul truck drivers. Conventional mining haul truck lights can blind oncoming vehicles (Diagram 1). In an
attempt to remedy this, drivers often angle these lights downwards, impairing their effectiveness (Diagram 2). The
Model 526 XL haul Anti-Glare beam pattern has been engineered to maximize visibility without blinding oncoming
vehicles (Diagram 3).
Diagram 1
(Traditional Lights)
Diagram 2
(Traditional Lights Angled Down)
Diagram 3
(J.W. Speaker Anti-Glare Beam)
The Model 526 XL is sealed to IP69K, and is built to withstand the harsh conditions of mine sites. To back up this
claim, it is covered by our Lifetime Limited Warranty, which you can read about on page 158.
52
Model 526 XL
5.50"
140.0mm
6" x 6" LED Worklight
6.30"
160.5mm
Flood Beam
3.80"
96.9mm
12.60"
318.9mm
6.20"
158.0mm
Trapezoid Beam
Light Source: LED
Raw Output: 9,000 Lumens
Effective Output: 6,800 (Spot)/ 5,500 (Low Beam) Lumens
Input Voltage: 12-24V DC
Current Draw: 9.00 Amps @ 12V DC; 5.00 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Additional Information
Voltage
Lens
Part #
Flood
12-24V DC
Glass
1300061
Flood
12-24V DC
Polycarbonate
1300201
Anti-Glare
12-24V DC
Glass
1300051
Anti-Glare
12-24V DC
Polycarbonate
1300191
Spot
12-24V DC
Glass
1300081
Spot
12-24V DC
Polycarbonate
1300221
Trap
12-24V DC
Glass
1300071
Trap
12-24V DC
Polycarbonate
1300211
53
Model 623
15" x 8" LED Scene Light
When you’re looking for the most illumination possible, look no further than the Model 623. Boasting a massive
40,000 Raw (20,000 Effective) Lumens of bright, white light, the Model 623 high-output LED scene light is J.W.
Speaker’s most powerful product yet.
The Model 623 is available in three different beam patterns; narrow, medium, and wide flood. It is perfect for a wide
range of uses, including mining equipment, light towers, and any application for which you need a vast amount of
light. Unlike traditional bulb-based high-output scene lights, the Model 623 features energy-efficient LEDs that remain
cool to the touch.
The Model 623 is built to withstand even the most rugged applications. It features a durable die-cast aluminum
housing that is sealed to IP67, a stainless steel bracket that resists rust and corrosion, a heavy duty glass lens that
stands up to harsh environmental conditions, and state-of-the-art LEDs that are guaranteed to last longer and use
less energy than bulb-based lighting. To back up these claims, the Model 623 is covered by our Lifetime Limited
Warranty, which you can learn more about on page 158.
54
Model 623
19.63"
498.5mm
15" x 8" LED Scene Light
8.52"
216.5mm
7.22"
183.4mm
11.37"±1.00"
288.8mm±25.4mm
3.50"
88.9mm
Light Source: LED
Raw Output: 40,000 Lumens
Effective Output: 20,000 Lumens
Input Voltage: 24-48V DC or 110-240V AC
Current Draw: 10.00 Amps @ 24V DC; 5.00 Amps @ 48V DC;
2.50 Amps @ 120V AC; 1.25 Amps @ 240V AC
Standards: UL Recognized (80-270V AC versions only),
Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Additional Information
Voltage
Lens
Part #
Medium Flood
24-48V DC
Glass
0546681
Medium Flood
110-240V AC
Glass
0546711
Narrow Flood
24-48V DC
Glass
0546671
Narrow Flood
110-240V AC
Glass
0546701
Super Wide Flood
24-48V DC
Glass
0549301
Super Wide Flood
110-240V AC
Glass
0549311
Wide Flood
24-48V DC
Glass
0546691
Wide Flood
110-240V AC
Glass
0546721
55
Model 660
3" x 7" LED Worklight
4.80"
121.8mm
Universal Pedestal
Mount
6.69"
170.0mm
3.21"
81.5mm
11.88"
301.7mm
Panel Mount
1.68"
42.7mm
Light Source: LED
Raw Output: 2,000 Lumens
Effective Output: 1,600 Lumens
Input Voltage: 12-24V DC
Current Draw: 2.00 Amps @ 12V DC; 1.00 Amps @ 24V DC
Mating Connector: Packard (#12059183)
Standards: Buy America Compliant, Sealed to IP67
Mounting: Panel or universal pedestal mount
7.48"
190.0mm
2.92"
74.2mm
5˚
4.14"
105.1mm
Pattern
56
Additional Information
Voltage
Lens
Part #
Flood
Panel Mount
12-24V DC
Glass
0548521
Flood
Pedestal Mount
12-24V DC
Glass
0548511
Model 670 XD
4.5" (PAR36) LED Worklight
6.39"
162.4mm
2.07"
52.6mm
2.85"
72.5mm
Light Source: LED
Raw Output: 1,080 Lumens
Effective Output: 780 Lumens
Input Voltage: 12-24V or 12-110V DC
Current Draw:
12-24V Version: 1.30 Amps @ 12V DC; 0.60 Amps @ 24V DC
12-110V Version: 1.30 Amps @ 12V DC; 0.60 Amps @ 24V DC;
0.20 Amps @ 110V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions - 13 up to 8V
contact/15KV air discharge), SAE J1455 (Environmental 4.13.1.1.1 steady state jump starts), ECE Reg. 10 (Radiated
Emissions), CE CISPR (12/22), UL Listed, EN55022,
EN12895, Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Additional Information
4.88"
124.0mm
Voltage
Lens
Part #
Flood
12-24V DC
Polycarbonate
1403241
Flood
12-110V DC
Polycarbonate
1403291
Spot
12-24V DC
Polycarbonate
1403261
Spot
12-110V DC
Polycarbonate
1403281
Trap
12-24V DC
Polycarbonate
1403251
Trap
12-110V DC
Polycarbonate
1403271
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
57
Model 680 XD
5.75" (PAR46) LED Worklight
6.57"
166.8mm
7.63"
193.8mm
2.57"
65.3mm
3.47"
88.3mm
6.19"
157.2mm
Light Source: LED
Raw Output: 1,700 Lumens
Effective Output: 1,060 Lumens
Input Voltage: 12-24V DC
Current Draw: 2.00 Amps @ 12V DC; 1.00 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions), SAE J1455
(Environmental - 4.13.1.1.1 steady state jump starts),
ECE Reg. 10 (Radiated Emissions), CE CISPR (12/22),
Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
58
Additional Information
Voltage
Lens
Part #
Flood
12-24V DC
Polycarbonate
1501641
Spot
12-24V DC
Polycarbonate
1501661
Trap
12-24V DC
Polycarbonate
1501651
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
Model 735
3" x 5" LED Worklight
5.85"
148.5mm
11.17"±0.25"
283.6mm±6.4mm
1.93"
48.9mm
3.51"
89.3mm
Light Source: LED
Raw Output: 2,700 Lumens
Effective Output: 1,400 Lumens
Input Voltage: 12V, 24V or 12-32V DC
Current Draw:
12V DC Version: 3.70 Amps @ 12V DC
24V DC Version: 1.70 Amps @ 24V DC
12-24V DC Version: 3.00 Amps @ 12V DC; 1.50 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J575 (Worklights), SAE J1113 (Radiated
Emissions), SAE J1455 (Environmental),
Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Additional Information
5.68"
144.2mm
Voltage
Lens
Part #
Flood
12V DC
Glass
1704611
Flood
12-32V DC
Polycarbonate
1705471
Flood
24V DC
Glass
1704641
Spot
12V DC
Glass
1704621
Spot
12-32V DC
Polycarbonate
1705341
Spot
24V DC
Polycarbonate
1704651
Trap
12V DC
Glass
1704601
Trap
12-32V DC
Polycarbonate
1705331
Trap
24V DC
Glass
1704631
59
Model 735 XL
3" x 5" LED Worklight
5.85"
148.5mm
11.17"±0.25"
283.6mm±6.4mm
1.93"
48.9mm
3.51"
89.3mm
Light Source: LED
Raw Output: 2,700 Lumens
Effective Output: 1,400 Lumens
Input Voltage: 12-32V DC
Current Draw: 3.00 Amps @ 12V DC; 1.50 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug
(DT06-2S)
Standards: SAE J575 (Worklights), SAE J1113 (Radiated
Emissions), SAE J1455 (Environmental), Buy America
Compliant, Sealed to IP69K
Mounting: Universal Pedestal Mount
Pattern
60
Additional Information
5.68"
144.2mm
Voltage
Lens
Part #
Flood
12-32V DC
Glass
1706071
Flood
12-32V DC
Polycarbonate
1706351
Spot
12-32V DC
Glass
1706091
Spot
12-32V DC
Polycarbonate
1706371
Trap
12-32V DC
Glass
1706081
Trap
12-32V DC
Polycarbonate
1706361
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
Model 736
3.92"
99.7mm
3" x 5" LED Worklight
7.59"
192.9mm
5.50"
139.7mm
Light Source: LED
Raw Output: 2,700 Lumens
Effective Output: 1,400 Lumens
Input Voltage: 12V or 24V DC
Current Draw: 3.70 Amps @ 12V DC; 1.70 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J575 (Worklights), SAE J1113 (Radiated
Emissions), SAE J1455 (Environmental), ECE Reg. 10
(Radiated Emissions), Buy America Compliant,
Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Additional Information
3.52"
89.5mm
Voltage
Lens
Part #
Vertical Flood
12V DC
Polycarbonate
1704911
Vertical Flood
24V DC
Polycarbonate
1704961
61
Model 770 XD
5.67"
144.1mm
3" x 5" LED Worklight
3.93"
99.8mm
5.40"
137.2mm
2.24"
57.0mm
Light Source: LED
Raw Output: 900 Lumens
Effective Output: 700 Lumens
Input Voltage: 12V or 12-48V DC
Current Draw:
12V Version: 1.00 Amps @ 12V DC
12-48V Version: 1.00 Amps @ 12V DC; 0.48 Amps @ 24V DC;
0.32 Amps @ 36V DC; 0.25 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions - up to 8kV
contact & 15kV air discharge), SAE J1455 (Environmental 4.13.1.1.1 steady state jump starts), ECE Reg. 10 (Radiated
Emissions), CE CISPR (12/22), EN55022, EN12895, Buy
America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Additional Information
Voltage
Lens
Part #
Flood
Light w/ DT04-2P Connector
12V DC
Polycarbonate
1706041
Flood
Light w/ DT04-2P Connector
12-48V DC
Polycarbonate
1706241
Flood
Light w/ PE12015792 Connector
12-48V DC
Polycarbonate
1706461
Spot
Light w/ DT04-2P Connector
12V DC
Polycarbonate
1706321
Spot
Light w/ DT04-2P Connector
12-48V DC
Polycarbonate
1706261
Trap
Light w/ DT04-2P Connector
12V DC
Polycarbonate
1706051
Light w/ DT04-2P Connector
12-48V DC
Polycarbonate
Trap
62
1706251
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
Model 771 XD
3" x 5" LED Worklight
6.01"
152.6mm
7.10"
180.5mm
2.01"
51.0mm
3.17"
80.5mm
Light Source: LED
Raw Output: 900 Lumens
Effective Output: 700 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.00 Amps @ 12V DC; 0.48 Amps @ 24V DC
0.33 Amps @ 36V DC; 0.25 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions - 13 up to 8KV
contact), SAE J1455 (4.13.1.1.1 - Environmental),
ECE Reg. 10 (Radiated Emissions), CE CISPR (12/22),
Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Additional Information
3.92"
99.7mm
Voltage
Lens
Part #
Flood
Light w/ Harness
12-48V DC
Polycarbonate
1705911
Spot
Light w/ Harness
12-48V DC
Polycarbonate
1706191
Vertical Flood
Light w/ Harness
12-48V DC
Polycarbonate
1706171
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
63
Model 775 XD
3.92"
99.7mm
3" x 5" LED Worklight & Turn Signal
7.10"
180.4mm
Light Source: LED
Raw Output: 600 Lumens
Effective Output: 400 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.20 Amps @ 12V DC; 0.60 Amps @ 24V DC;
0.40 Amps @ 36V DC; 0.30 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions - 13 up to 8V
contact/15KV air discharge), SAE J1455 (Environmental 4.13.1.1.1 steady state jump starts), ECE Reg. 6 (Signal),
ECE Reg. 10 (Radiated Emissions), CE CISPR (12/22),
UL Listed, Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Additional Information
Spot & Turn
64
10.95"±1.50"
278.1mm±12.7mm
2.30"
58.5mm
Voltage
Lens
Part #
12-48V DC
Polycarbonate
1706301
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
Model 776 XD
3" x 5" LED Dual Beam Worklight
6.01"
152.6mm
2.30"
58.5mm
5.94"±0.25"
150.9mm±6.4mm
7.10"
180.5mm
Light Source: LED
Raw Output: 1,440 Lumens
Effective Output: 250 (Top Beam)/ 370 (Bottom Beam)/
620 (Dual Beam) Lumens
Input Voltage: 12-24V DC
Current Draw:
Top or Bottom Beam: 0.77 Amps @ 12V DC;
0.37 Amps @ 24V DC
Dual Beam: 1.50 [email protected] 12V DC; 0.73 Amps @ 24V DC
Mating Connector: 3-Pin Deutsch Weather-Proof Plug (DT06-3S)
Standards: SAE J1113 (Radiated Emissions - 13 up to 8V
contact & 15KV air discharge), SAE J1455 (Environmental
- 4.13.1.1.1 steady state jump starts), ECE Reg. 6 (Signal),
ECE Reg. 10 (Radiated Emissions), CE CISPR (12/22),
UL Listed, EN55022, EN12895, Buy America Compliant,
Sealed to IP67
Mounting: Universal pedestal mount
Special Note: There are three settings for this light—top
beam, bottom beam, or both simultaneously
Pattern
Additional Information
Dual Beam
3.92"
99.7mm
Voltage
Lens
Part #
12-24V DC
Polycarbonate
1706331
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
65
Model 778
5.67"
144.1mm
3" x 5" LED Backup Camera Light
3.93"
99.8mm
5.40"
137.2mm
Light Source: LED
Raw Output: 580 Lumens
Effective Output: 900 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.00 Amps @ 12V DC; 0.48 Amps @ 24V DC;
0.33 Amps @ 36V DC; 0.25 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions), SAE J1455
(Environmental), SAE J593 (Backup), ECE Reg. 10 (Radiated
Emissions), CE CISPR (12/22), EN55022, EN12895,
CE Recognized, Buy America Compliant, Sealed to IP67
Mounting: Universal Pedestal Mount
Special Notes: SAE J593 states that the light must shine no
brighter than 300 Candela. The Model 778 XD produces just
under 300 Candelas in an evenly distributed beam pattern.
Pattern
Additional Information
Spot
66
2.24"
57.0mm
Voltage
Lens
Part #
12-48V DC
Polycarbonate
1706721
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
Model 781
1.48"
37.6mm
2" x 6" LED Mast Light
6.11"
155.1mm
11.84"±0.50"
300.8mm±12.7mm
1.81"
46.0mm
Light Source: LED
Raw Output: 600 Lumens
Effective Output: 430 Lumens
Input Voltage: 12V DC
Current Draw: 1.26 Amps @ 12V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: ETL Conformance to UL 583, CE Recognized,
UL Recognized, Buy America Compliant, Sealed to IP67
Pattern
Flood
Additional Information
1.18"
30.0mm
1.38"
35.0mm
3.35"
85.0mm
Voltage
Lens
Part #
12V DC
Polycarbonate
0546041
67
Model 783
2.12"
53.8mm
2" x 6" LED Mast Light
1.48"
37.6mm
1.81"
46.0mm
11.84"±0.50"
300.8mm±12.7mm
Light Source: LED
Raw Output: 600 Lumens
Effective Output: 430 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.00 Amps @ 12V DC; 0.55 Amps @ 24V DC;
0.38 Amps @ 36V DC; 0.25 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: UL Recognized, SAE J575 (Mast Lights),
SAE J1113 (Radiated Emissions), SAE J1455
(Environmental), CE Recognized, ETL Conformance to UL
583, Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
68
Additional Information
6.11"
155.1mm
Voltage
Lens
Part #
Flood
12-48V DC
Polycarbonate
0544691
Vertical Flood
12-48V DC
Polycarbonate
0544681
Model 803
5.92"±0.50"
150.5mm±12.7mm
3" x 5" LED Worklight
3.08"
78.2mm
1.51"
38.3mm
0.40"
10.1mm
2.63"
66.8mm
4.43"
112.6mm
Light Source: LED
Raw Output: 420 Lumens
Effective Output: 250 Lumens
Input Voltage: 12V or 24-48V DC
Current Draw: 0.33 Amps @ 12V DC; 0.14 Amps @ 24V DC;
0.10 Amps @ 36V DC; 0.07 Amps @ 48V DC
Wiring: 6" Wires with 0.25" Blade Terminal
Standards: UL Recognized (24-48V version only),
Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Pattern
Additional Information
Voltage
Lens
Part #
Flood
12V DC
Polycarbonate
0546741
Flood
24-48V DC
Polycarbonate
0546751
Trap
12V DC
Polycarbonate
0548251
69
Model 806
3" x 5" LED Worklight
3.27"
83.2mm
Combine Retrofit
Mount
2.40"
60.9mm
4.91"
124.8mm
3.96"
100.5mm
5.64"
143.2mm
Bottom Mount
5.64"
143.2mm
Light Source: LED
Raw Output: 900 Lumens
Effective Output: 700 Lumens
Input Voltage: 12V DC
Current Draw: 1.50 Amps @ 12V DC
Mating Connector: Packard (#12020599)
Standards: SAE J1113 (Radiated Emissions), ECE Reg. 10
(Radiated Emissions), Buy America Compliant,
Sealed to IP67
Mounting: See additional information below
4.56"
115.9mm
2.24"
56.8mm
6.81"
173.0mm
7.28"
184.8mm
2.40"
60.9mm
13.14"±0.25"
333.6mm±6.4mm
70
Pattern
Additional Information
Voltage
Lens
Part #
ECE/ SAE Flood
Light w/ Bottom Mount
12V DC
Glass
0545971
ECE/ SAE Flood
Light w/ Combine Retrofit Mount
12V DC
Glass
0547431
ECE/ SAE Flood
Light w/ Fender Mount
12V DC
Glass
0545961
ECE/ SAE Flood
Light w/ 10° Mounting Plate
12V DC
Glass
0548311
ECE/ SAE Flood
Light w/ Side Mount
12V DC
Glass
0545981
Model 832
3.95"
100.4mm
4" x 4" LED Worklight
3.82"
96.9mm
4.96"
126.0mm
11.67"±0.50"
296.5mm±12.7mm
1.61"
40.8mm
Light Source: LED
Raw Output: 2,400 Lumens
Effective Output: 1,425 Lumens
Input Voltage: 12-24V DC
Current Draw: 2.90 Amps @ 12V DC; 1.36 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Additional Information
3.37"
85.6mm
Voltage
Lens
Part #
Flood
12-24V DC
Polycarbonate
0545631
Trap
12-24V DC
Polycarbonate
0545621
71
Model 832 XL
3.95"
100.4mm
4" x 4" LED Worklight
3.82"
96.9mm
4.96"
126.0mm
11.67"±0.50"
296.5mm±12.7mm
1.61"
40.8mm
Light Source: LED
Raw Output: 2,400 Lumens
Effective Output: 1,425 Lumens
Input Voltage: 12-24V DC
Current Draw: 2.90 Amps @ 12V DC; 1.36 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
72
Additional Information
3.37"
85.6mm
Voltage
Lens
Part #
Flood
12-24V DC
Polycarbonate
0547401
Trap
12-24V DC
Polycarbonate
0547411
Model 840 XD
4" x 4" LED Worklight
6.07"
154.0mm
2.13"
54.1mm
Light Source: LED
Raw Output: 1,080 Lumens
Effective Output: 780 Lumens
Input Voltage: 12-24V or 12-110V DC
Current Draw:
12-24V Version: 1.30 Amps @ 12V DC; 0.60 Amps @ 24V DC
12-110V Version: 1.30 Amps @ 12V DC; 0.60 Amps @ 24V DC;
0.20 Amps @ 110V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
or .250" x .032" Blade Connector (AMP 180923)
Standards: SAE J1113 (Radiated Emissions - 13 up to 8V
contact/15KV air discharge), SAE J1455 (Environmental 4.13.1.1.1 steady state jump starts), ECE Reg. 10 (Radiated
Emissions), CE CISPR (12/22), UL Listed, EN55022,
EN12895, Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Additional Information
4.46"
113.2mm
Voltage
Lens
Part #
Flood
Integrated 2-Pin Deutsch Connector
12-24V DC
Polycarbonate
1300001
Flood
Integrated 2-Pin Deutsch Connector
12-110V DC
Polycarbonate
1300091
Spot
Integrated 2-Pin Deutsch Connector
12-24V DC
Polycarbonate
1300021
Spot
Integrated 2-Pin Deutsch Connector
12-110V DC
Polycarbonate
1300101
Trap
Integrated 2-Pin Deutsch Connector
12-24V DC
Polycarbonate
1300011
Trap
Integrated 2-Pin Deutsch Connector
12-110V DC
Polycarbonate
1300031
Trap
Integrated AMP Connector
12-110V DC
Polycarbonate
1300041
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
73
Model 840 XD Vertical Flood
4" x 4" LED Forklift Worklight
Some forklift operators have found that mounting general purpose worklights to their forklifts causes
light to reflect off of the forks and/or uprights, creating glare. We have created the Model 840 XD
vertical flood light to specifically address this issue, without sacrificing on workspace illumination.
There are two versions of the vertical flood beam pattern, a right-hand version, and a left-hand version.
Their beam patterns have been specifically engineered to be used in conjunction with one another to
provide ample illumination while at the same time minimizing glare to the uprights.
Traditional Flood Lights
74
Model 840 Vertical Flood Lights
Model 840 XD Vertical Flood
4" x 4" LED Forklift Worklight
6.07"
154.0mm
2.13"
54.1mm
Light Source: LED
Raw Output: 1,080 Lumens
Effective Output: 780 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.30 Amps @ 12V DC; 0.60 Amps @ 24V DC;
0.40 Amps @ 36V DC; 0.30 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions - 13 up to 8V
contact/15KV air discharge), SAE J1455 (Environmental 4.13.1.1.1 steady state jump starts), ECE Reg. 10 (Radiated
Emissions), CE CISPR (12/22), UL Listed, EN55022,
EN12895, Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Additional Information
4.46"
113.2mm
Voltage
Lens
Part #
Left Hand Vertical Flood
12-48V DC
Polycarbonate
1300301
Right Hand Vertical Flood
12-48V DC
Polycarbonate
1300311
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
75
Model 880 XD
3" x 5" LED Worklight
5.25"
133.2mm
1.88"
47.8mm
2.34"
59.5mm
0.38"
9.7mm
5.40"
137.1mm
Light Source: LED
Raw Output: 1,680 Lumens
Effective Output: 900 Lumens
Input Voltage: 12-24V DC
Current Draw:
Non-Switch Version: 1.30 Amps @ 12V DC;
0.70 Amps @ 24V DC
On/Off Switch Version: 1.20 Amps @ 12V DC;
0.60 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1113 (Radiated Emissions), SAE J1455
(Environmental), ECE Reg. 10 (Radiated Emissions),
CE CISPR, UL Listed (Except Switch Version), Buy America
Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
76
Additional Information
Voltage
Lens
Part #
Flood
On/Off Switch Version
12-24V DC
Polycarbonate
1603331
Flood
Non-Switch Version
12-24V DC
Polycarbonate
1603261
Spot
On/Off Switch Version
12-24V DC
Polycarbonate
1603311
Spot
Non-Switch Version
12-24V DC
Polycarbonate
1603241
Trap
On/Off Switch Version
12-24V DC
Polycarbonate
1603321
Trap
Non-Switch Version
12-24V DC
Polycarbonate
1603251
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
Model 881 XD
3" x 5" LED Worklight
7.04"
178.7mm
1.88"
47.8mm
3.24"
82.3mm
Light Source: LED
Raw Output: 1,680 Lumens
Effective Output: 900 Lumens
Input Voltage: 12-24V DC
Current Draw: 1.00 Amps @ 12V DC; 0.48 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: : SAE J1113 (Radiated Emissions), SAE J1455
(Environmental), ECE Reg. 10 (Radiated Emissions),
CE CISPR, UL Listed, Buy America Compliant,
Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Additional Information
4.34"
110.1mm
0.38"
9.7mm
3.61"
91.6mm
Voltage
Lens
Part #
Flood
12-24V DC
Polycarbonate
1603291
Spot
12-24V DC
Polycarbonate
1603271
Trap
12-24V DC
Polycarbonate
1603281
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
77
Model 4410
3.21"
81.5mm
3" LED Worklight
3.74"
95.0mm
1.43"
36.3mm
4.49"
114.0mm
1.10"
28.0mm
0.95"
24.1mm
3.05"
77.4mm
Light Source: LED
Raw Output: 1,100 Lumens
Effective Output: 525 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.00 Amps @ 12V DC; 0.50 Amps @ 24V DC;
0.33 Amps @ 36V DC; 0.25 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
78
Additional Information
Voltage
Lens
Part #
Flood
12-48V DC
Polycarbonate
0545931
Spot
12-48V DC
Polycarbonate
0547681
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
Model 4410 XL
3.21"
81.5mm
3" LED Worklight
3.74"
95.0mm
1.43"
36.3mm
4.49"
114.0mm
1.10"
28.0mm
0.95"
24.1mm
3.05"
77.4mm
Light Source: LED
Raw Output: 1,100 Lumens
Effective Output: 525 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.00 Amps @ 12V DC; 0.50 Amps @ 24V DC;
0.33 Amps @ 36V DC; 0.25 Amps @ 48V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Voltage
Lens
Part #
Flood
Additional Information
12-48V DC
Polycarbonate
0548291
Spot
12-48V DC
Polycarbonate
0548281
Replacement Mounting Kit – Black
8200121
Replacement Mounting Kit – Stainless Steel
8200101
79
Model 6020
4.41"
112.0mm
4" x 5" LED Worklight
6.40"
162.5mm
20.60"
523.3mm
3.00"
76.0mm
8.66"
122.0mm
2.88"
73.2mm
Light Source: LED
Raw Output: 1,800 Lumens
Effective Output: 1,010 Lumens
Input Voltage: 12V DC
Current Draw: 2.33 Amps @ 12V DC
Mating Connector: Packard (#12059183)
Standards: : ECE Reg. 10 (Radiated Emissions), Buy America
Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
Flood
80
Additional Information
2.77"
70.4mm
Voltage
Lens
Part #
12V DC
Polycarbonate
1000011
Model 6040
4.45"
112.9mm
4.5" (PAR36) LED Worklight
0.86"
21.9mm
4.22"
107.1mm
Light Source: LED
Raw Output: 1,050 Lumens
Effective Output: 770 Lumens
Input Voltage: 12V or 12-48V DC
Current Draw:
12V DC Version: 2.00 Max Amps @ 12V DC
12-48V DC Version: 2.00 Amps @ 12V DC;
0.50 Amps @ 24V DC; 0.33 Amps @ 36V DC;
0.26 Amps @ 48V DC
Mating Connector: 0.25" Blade Terminal, #6 Ring Terminal, or
#8 Ring Terminal
Standards: Buy America Compliant, Sealed to IP66
Mounting: Replaces PAR36 Sealed Beams
Special Notes: Light comes configured with 0.25" blade
terminal. #6 and #8 ring terminal adaptors included.
Pattern
Additional Information
1.70"
43.3mm
Voltage
Lens
Part #
Flood
12V DC
Glass
3157291
Flood
12V DC
Polycarbonate
8000111
Flood
12-48V DC
Glass
3157601
Flood
12-48V DC
Polycarbonate
3157471
Spot
12V DC
Polycarbonate
8000281
Spot
12-48V DC
Glass
3157581
Spot
12-48V DC
Polycarbonate
3157491
Trap
12V DC
Glass
3157301
Trap
12V DC
Polycarbonate
8000121
Trap
12-48V DC
Glass
3157591
Trap
12-48V DC
Polycarbonate
3157481
81
Model 7150
5" x 7" LED Worklight
5.94"
150.8mm
2.15"
54.4mm
4.25"
108.67mm
4.45"
113.1mm
3.71"
94.1mm
2.35"
59.7mm
Light Source: LED
Raw Output: 5,200 Lumens
Effective Output: 3,300 Lumens
Input Voltage: 12-24V DC
Current Draw: 6.50 Amps @ 12V DC; 3.50 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J575 (Worklights), SAE J1113 (Radiated
Emissions), SAE J1455 (Environmental), Buy America
Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
82
Additional Information
1.01"
25.5mm
2.0"
51.0mm
6.52"
165.5mm
Voltage
Lens
Part #
Flood
12-24V DC
Clear Polycarbonate
1801001
Spot
12-24V DC
Clear Polycarbonate
1801151
Trap
12-24V DC
Clear Polycarbonate
1800991
Trap
12-24V DC
Amber Polycarbonate
1801061
Model 7150 XL
5" x 7" LED Worklight
5.94"
150.8mm
2.15"
54.4mm
4.25"
108.67mm
4.45"
113.1mm
3.71"
94.1mm
2.35"
59.7mm
Light Source: LED
Raw Output: 8,600 Lumens
Effective Output: 5,400 Lumens
Input Voltage: 12-24V DC
Current Draw: 6.50 Amps @ 12V DC; 3.50 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J575 (Worklights), SAE J1113 (Radiated
Emissions), SAE J1455 (Environmental), Buy America
Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Pattern
Additional Information
1.01"
25.5mm
2.0"
51.0mm
6.52"
165.5mm
Voltage
Lens
Part #
Flood
12-24V DC
Polycarbonate
1801341
Spot
12-24V DC
Polycarbonate
1801351
Trap
12-24V DC
Polycarbonate
1801331
83
Model 7151
5" x 7" LED Worklight
4.45"
113.1mm
6.52"
165.5mm
4.28"
108.7mm
Light Source: LED
Raw Output: 4,500 Lumens
Effective Output: 3,000 Lumens
Input Voltage: 12-24V DC
Current Draw: 6.50 Amps @ 12V DC; 3.00 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: SAE J1455 (Environmental), ECE Reg. 10
(Radiated Emissions), Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Pattern
84
Additional Information
Voltage
Lens
Part #
Flood
12-24V DC
Glass
1801411
Trap
12-24V DC
Glass
1801401
Torture Tested
XD Series LED Worklights
Scan the QR code to the left, or go to our
YouTube channel (JWSpeakerCorporation),
and see all of the torture tests for yourself.
85
Model 8475
LED Handheld Worklight
The incredibly durable Model 8475 takes the power of a J.W. Speaker worklight and puts it in the palm of your
hand—allowing you to light up places that other worklights cannot reach. Powered by an internal, rechargeable
battery that can be charged almost anywhere, the Model 8475 LED handheld worklight will give you 6+ hours of
continuous light on a single charge. An indicator light on the handle tells you when the battery is low, plugged in and
charging, or fully charged.
Available in either a flood or spot beam pattern configuration, the Model 8475 uses state-of-the-art LEDs to produce
1,050 Raw (700 Effective) Lumens of bright, white light. Thanks to an impact-resistant nylon housing and a UVresistant polycarbonate lens, the Model 8475 can withstand being dropped, and won’t rust or corrode over time.
Over/undervoltage protection safeguards and extends the life of the internal battery, and integrated thermal protection
prevents the light from overheating. Inside and out, the Model 8475 will stand up to rough use that no flashlight or
bulb-based worklight could ever survive!
The Model 8475 comes complete with a 12V DC vehicle charging cord, 120V AC wall charging unit, and a durable
carrying case which easily holds the light and both charging options. Altogether, the Model 8475 makes it easier than
ever to get light exactly where you need it.
86
Model 8475
LED Handheld Worklight
11.59"
294.3mm
5.80"
147.2mm
Light Source: LED
Raw Output: 1,050 Lumens
Effective Output: 770 Lumens
Battery Life: 6+ hours at full charge
Charging Time: 6 hours with wall charger; 8 hours with
vehicle charger
Weight: 3.10 lbs
Standards: Buy America Compliant
Special Note: Includes 100-240V AC wall charger, 6' vehicle
charging cord (12V DC), and protective carrying case. The
worklight is covered with the Lifetime Limited Warranty. The
battery pack is covered with a 1-year limited warranty.
5.70"
144.7mm
Pattern
Voltage
Lens
Part #
Flood
Additional Information
12V DC
Polycarbonate
0548561
Spot
12V DC
Polycarbonate
0548551
Replacement 6' Vehicle Charging Cord
12V DC
3267220
87
Models 9710 & 9720
6.15"
156.2mm
4" x 6" HID Worklight
1.15"
29.2mm
3.62"
91.9mm
6.40"
162.5mm
31.25±.50"
793.7±12.7mm
8.01"
203.4mm
3.00"
76.2mm
Light Source: HID
Raw Output: 3,300 Lumens
Effective Output: 2,400 Lumens
Input Voltage: 12V or 24V DC
Current Draw: 3.18 Amps @ 12V DC; 1.59 Amps @ 24V DC
Mating Connector: 2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Standards: Buy America Compliant, Sealed to IP68
Mounting: Universal pedestal mount
Pattern
Flood
88
Additional Information
Voltage
Lens
Part #
Model 9710
12V DC
Glass
1703121
Flood
Model 9720
24V DC
Glass
1703151
Spot
Model 9710
12V DC
Glass
1703141
Spot
Model 9720
24V DC
Glass
1703161
Trap
Model 9710
12V DC
Glass
1703131
Trap
Model 9720
24V DC
Glass
1703171
Model 9710/9720 Flood Lens Reflector Assembly
3155021
Model 9710/9720 Spot Lens Reflector Assembly
3155031
Model 9710/9720 Trap Lens Reflector Assembly
3155041
Visit Us Online
www.jwspeaker.com
Check Out Our Online Spec Sheets
While many customers utilize our print catalog as a resource for product information, we highly recommend that you
also take advantage of the information available on our website. Our website features detailed product specification
sheets which are more in-depth than the information you'll find in our printed catalog.
The Anatomy of a J.W. Speaker Spec Sheet
Model Information
Model 7150
5" x 7" Oval LED Worklight
Product Image
Product List
Model Number
7150-12V
7150-24V
Description
12V LED Worklight
24V LED Worklight
Features & Benefits
4,500 Raw Lumens; 3,000 Effective Lumens
Available in 12V DC or 24V DC configurations
Flood, Spot & Trapezoid beam patterns available
Your choice of durable glass or polycarbonate (amber or clear) lens options
Rugged solid state LEDs can withstand shock & vibration
Long-lasting LEDs mean never having to replace another bulb again!
Die-cast magnesium housing provides maximum protection
Universal pedestal mount
Available in a Combine Retrofit Kit (see online Photo Gallery)
Overvoltage Protection: 150V peak for 400ms duration, 5 pulses at a 10s interval
“XL” version for extreme industrial conditions also available
General Specifications
Dimension
Drawing
Lens Pattern :
Lens Material :
Housing Material :
Mounting Hardware:
Mounting :
Connector:
Mating Connector:
Flood, Spot, or Trapezoid
Glass or Polycarbonate
Die-Cast Magnesium
(x1) 1/2" Mounting Bolt
Universal Pedestal Mount
Integrated 2-Pin Deutsch Weather-Proof Socket (DT04-2P)
2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Technical Specifications
12V Version
12V DC Input
9-16V DC Operating Voltage
6.50 Amps @ 12V DC
Raw Lumen Output: 4,500
Effective Lumen Output: 3,000
Standards
Compliance
24V Version
24V DC Input
20-32V DC Operating Voltage
3.00 Amps @ 24V DC
Raw Lumen Output: 4,500
Effective Lumen Output: 3,000
Features & Benefits
General
Specifications
Technical
Specifications
Standards Compliance
Buy America Compliant
SAE J1113
Sealed to IP67
SAE J575
SAE J1455
Applications
Additional
Information
Product
Configurations
Agricultural
Forestry
Military
Recreational
Construction
Industrial
Mining
Specialty Trucks
Fire & Rescue
Lawn & Garden
Off-Highway
Utility
Application
Recommendations
Additional Info
Wires: Red=Positive, Black=Negative
Transient Spike Protection: 150V Peak @ 1 HZ-100 Pulses
Dimensions in inches (mm in parentheses).
Dimensions are for reference only.
J.W. Speaker Corporation Germantown, WI 53022 • www.jwspeaker.com • 262-251-6660 • [email protected] _____
Contact
Information
89
Emergency & Warning
Flashing Lights
Model 146
Page 92
Model 284
Page 93
Strobe Lights
Model 405
Page 96
Model 541
Page 99
Models 400/401
Page 94
Models 538/539
Page 98
Model 601 XL
Page 101
Spot Lights
90
Model 527 RED
Page 97
Models 770 BLU/RED
Page 102
Model 404
Page 95
Model 601
Page 100
Why Buy J.W. Speaker Emergency and Warning Lights?
Safety First
J.W. Speaker Corporation understands that safety is always the #1 priority, and visibility is a huge part of workplace safety.
Using the latest in LED technology, we’re able to help prevent accidents by increasing visibility in the workplace. For example,
a fast-approaching forklift from around an otherwise blind corner doesn’t have to result in an injury thanks to products like our
new Model 770 BLU or Model 770 RED, which project a bright blue or red dot on the ground in front of the forklift to warn
pedestrians of an incoming forklift. Other products like our flashing, strobe, and rotating warning lights increase visibility and
help to create a safer work environment.
Designed to Last
We recognize that emergency and warning lights need to be reliable, which is why we design ours to function in even the
most adverse conditions. We select only the highest quality materials for our lenses and housings because we understand
that their lifespan and dependability directly translate to a safer work environment for you. You can trust J.W. Speaker
emergency and warning lights to be up to the task.
Lifetime Limited Warranty
All of our LED emergency and warning lights are covered by a Lifetime Limited Warranty against defects in materials,
components, and workmanship. To learn more about the Lifetime Limited Warranty, see page 158.
91
Model 146
2.56"
65.0mm
3" LED Flashing Warning Light
2.97"
75.4mm
1.27"
32.3mm
Light Source: LED
Input Voltage: 12-48V DC
Current Draw: 0.07 - 0.10 Amps @ 12V DC;
0.03 - 0.05 Amps @ 24V DC; 0.02 - 0.03 Amps @ 36V DC;
0.01 - 0.03 Amps @ 48V DC
Standards: UL 583, Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
Flasher
92
Additional Information
3.35"
85.1mm
Voltage
Lens
Part #
12-48V DC
Amber Polycarbonate
0646321
Model 284
2" x 9" Low Profile LED Strobe Light
8.50"
216.0mm
7.68"
195.0mm
1.72"
43.7mm
9.29"
235.9mm
Light Source: LED
Input Voltage: 12-48V DC
Current Draw: 0.50 Amps @ 12V DC; 0.25 Amps @ 24V DC;
0.18 Amps @ 36V DC; 0.13 Amps @ 48V DC
Standards: SAE J845 (Warning-Class 3), UL Recognized,
Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
Additional Information
1.95"
49.4mm
Voltage
Lens
Part #
SAE Strobe
Amber Light
12-48V DC
Clear Acrylic
0645661
SAE Strobe
Blue Light
12-48V DC
Clear Acrylic
0645761
SAE Strobe
Red Light
12-48V DC
Clear Acrylic
0645751
93
Models 400 & 401
4.38"
111.3mm
5" Strobe Light
3.85"
97.8mm
2.98"
75.7mm
4.48"
113.8mm
4.81"
112.2mm
Light Source: Flash Tube
Input Voltage: 12-80V DC
Current Draw: 0.15 Amps @ 80V DC
Standards: CE Recognized, UL Recognized,
Buy America Compliant
Mounting: Universal or magnetic mount
Available in Amber or Clear Lens
Function
94
Voltage
Lens
Part #
Strobe
Additional Information
Model 400 w/ Universal Mount
12-80V DC
Amber Polycarbonate
0644051
Strobe
Model 400 w/ Universal Mount
12-80V DC
Clear Polycarbonate
0644041
Strobe
Model 401 w/ Magnet Mount & 12' Vehicle Charging Cord
12-80V DC
Amber Polycarbonate
0644111
Model 404
4.81"
122.2mm
5" LED Strobe Light
4.38"
111.3mm
4.51"
114.6mm
9.78"±0.50"
248.4mm±12.7mm
Light Source: LED
Input Voltage: 12-24V or 9-110V DC
Current Draw:
12-24V Version: 1.00 Amps @ 12V DC; 0.60 Amps @ 24V DC
9-110V DC Version: 0.32 Amps @ 12V DC;
0.16 Amps @ 24V DC; 0.14 Amps @ 36V DC;
0.11 Amps @ 48V DC; 0.09 Amps @ 60V DC;
0.08 Amps @ 80V DC; 0.07 Amps @ 110V DC
Flash Rate:
12-24V and 36-80V Version: Mode 1: 240 fpm; Mode 2: 340 fpm;
Mode 3: 540 fpm; Mode 4: Rotating Beacon
9-110V DC Version: Mode 1: 240 fpm; Mode 2: 340 fpm;
Mode 3: 540 fpm; Mode 4: 90 fpm;
Mode 5: Rotating Beacon
Standards: SAE J575 (Strobe), SAE J845 (Warning-Class 2,
Mode 1 Amber Only), Buy America Compliant, Sealed to IP67
Mounting: Gasket, magnetic, or universal mount
3-Point Mounting Assembly
Available in Amber, Red or Blue Lens
Voltage
Lens
Part #
SAE Strobe
Function
Additional Information
4 Modes w/ Gasket Mount
12-24V DC
Amber Acrylic
0646101
SAE Strobe
4 Modes w/ Magnetic Mount
12-24V DC
Amber Acrylic
0645781
SAE Strobe
4 Modes w/ Universal Mount
12-24V DC
Amber Acrylic
0645201
SAE Strobe
4 Modes w/ Universal Mount
12-24V DC
Blue Acrylic
0645271
SAE Strobe
5 Modes w/ Universal Mount
9-110V DC
Red Acrylic
0646301
3-Point Mounting Adapter Assembly Kit
8000301
95
Model 405
5" LED Strobe Light
4.38"
111.3mm
5.12"
129.9mm
2.19"
55.7mm
5.05"
128.3mm
11.12"±0.25"
282.4mm±6.4mm
Light Source: LED
Input Voltage: 12-80V DC
Current Draw: 1.00 Amps @ 12V DC; 0.60 Amps @ 24V DC;
0.55 Amps @ 36V DC; 0.40 Amps @ 48V DC;
0.27 Amps @ 72V DC; 0.22 Amps @ 80V DC
Flash Rate:
2-Mode Version: Mode 1: 510 fpm; Mode 2: Rotating Beacon
5-Mode Version: Mode 1: 510 fpm; Mode 2: 240 fpm;
Mode 3: 540 fpm; Mode 4: 340 fpm; Mode 5: Rotating Beacon
Standards: SAE J845 (Warning-Class 1, Mode 1 Amber Only),
ECE Reg. 10 (Radiated Emissions), CE CISPR 12 & 22, ECE
Reg. 65 (Mode 1 Amber Only), Buy America Compliant,
Sealed to IP67
Mounting: Universal or magnetic mount
Special Note: 0646061 has a ground wire and 2 power wires
(1 for strobe mode and 1 for rotating mode)
3-Point Mounting Assembly
Available in Amber, Blue, or Green Lens
Voltage
Lens
Part #
ECE/SAE Strobe
Function
2 Modes w/ Universal Mount
12-80V DC
Amber Acrylic
0646061
ECE/SAE Strobe
5 Modes w/ Universal Mount
12-80V DC
Amber Acrylic
0645531
Strobe
5 Modes w/ Universal Mount
12-80V DC
Blue Acrylic
0645731
Strobe
5 Modes w/ Universal Mount
12-80V DC
Green Acrylic
0645721
5 Modes w/ Magnet Mount & 12' Vehicle Charging Cord
12-80V DC
Amber Acrylic
ECE/SAE Strobe
Additional Information
3-Point Mounting Adapter Assembly Kit
96
0646121
8000301
Model 527 RED
5" x 10" LED "Keep Out" Zone Light
4.87"
128.8mm
2.63"
66.7mm
4.33"
110.0mm
4.02"
102.3mm
4.87"
128.8mm
1.97"
50.0mm
10.18"
258.5mm
Light Source: LED
Raw Output: 720 Lumens
Effective Output: 670 Lumens
Imput Voltage: 12-24V DC
Current Draw: 1.60 Amps @ 12V DC; 0.85 Amps @ 24V DC
Mating Connector: Integrated 2-Pin Deutsch Weatherproof
Socket (DT04-2P)
Standards: Buy America Compliant, Sealed to IP69K
Mounting: Universal pedestal mount
Special Note: This product projects a large red beam pattern
onto the ground to warn pedestrians and vehicles in
dangerous work areas
Function
Red "Keep Out" Zone Light
Additional Information
Voltage
Lens
Part #
12-24V DC
Glass
0549271
97
Models 538 & 539
2.85"
72.5mm
3" LED Strobe Light
Model 538
4.19"
106.4mm
5.19"
131.9mm
13.75"±0.50"
349.3mm±12.7mm
14.50"±0.50"
368.3mm±12.7mm
Model 539
Model 538 Light Source: LED
Input Voltage: 12-80V DC
Current Draw: 0.50 Amps @ 12V DC; 0.20 Amps @ 48V DC
Flash Rate: 60 +/- 10 fpm
Standards: SAE J845 (Warning-Class 3), UL Recognized,
Buy America Compliant
Mounting: Pipe mount
4.29"
109.0mm
3.86"
98.0mm
Model 539 Light Source: LED
Input Voltage: 12-80V DC
Current Draw: 0.50 Amps @ 12V DC; 0.20 Amps @ 48V DC
Flash Rate: 60 +/- 10 fpm
Standards: SAE J845 (Warning-Class 3, Amber Only),
UL Recognized, Buy America Compliant
Mounting: Flange mount
15.75"±0.50"
400.1mm±12.7mm
Available in Amber, Blue, Red, Green, or Clear Lens
Function
98
Additional Information
15.00"±0.50"
381.0mm±12.7mm
3.39"
86.1mm
Voltage
Lens
Part #
SAE Strobe
Model 538
12-80V DC
Amber Acrylic
0645011
SAE Strobe
Model 539
12-80V DC
Amber Acrylic
0644871
SAE Strobe
Model 539
12-80V DC
Blue Acrylic
0645111
SAE Strobe
Model 539
12-80V DC
Clear Acrylic
0645161
SAE Strobe
Model 539
12-80V DC
Green Acrylic
0645101
SAE Strobe
Model 539
12-80V DC
Red Acrylic
0645091
Model 541
5" Incandescent Flashing Warning Light
6.00"
152.4mm
5.26"±0.04"
133.6mm±1.0mm
2.75"
69.9mm
4.00"
101.6mm
Light Source: Incandescent Blub
Input Voltage: 12V DC
Current Draw: 2.00 Max Amps @ 12V DC
Flash Rate: 60-80 fpm
Standards: UL Recognized, Buy America Compliant
Mounting: Flush mount
Function
Flashing
Additional Information
Voltage
Lens
Part #
12V DC
Amber Polycarbonate
0641901
99
Model 601
8" LED Strobe Light
4.71"
119.7mm
6.45"
163.7mm
17.00"±0.50"
432.0mm±12.7mm
8.40"
212.5mm
7.70"
196.0mm
Light Source: LED
Input Voltage: 12-24V DC or 120-240V AC
Current Draw: 3.70 Amps @ 12V DC; 2.00 Amps @ 24V DC;
0.40 Amps @ 120V AC; 0.20 Amps @ 240V AC
Flash Rate:
Rotating Beacon Version: N/A
2-Mode Version: Mode 1: 510 fpm; Mode 2: 252 fpm
3-Mode Version: Mode 1: 510 fpm; Mode 2: 252 fpm;
Mode 3: Rotating Beacon
Standards: ECE Reg. 65 (Mode 1, Amber Only), SAE J845
(Warning-Class 1, Mode 1 Amber Only), UL Listed (120240V AC versions Only), Buy America Compliant,
Sealed to IP67
Mounting: Universal mount
Available in Amber or Red Lens
Function
Additional Information
ECE/SAE Rotating Beacon
100
Voltage
Lens
Part #
120-240V AC
Amber Polycarbonate
0643161
ECE/SAE Strobe
2 Modes
120-240V AC
Amber Polycarbonate
0643171
ECE/SAE Strobe
3 Modes
12-24V DC
Amber Polycarbonate
0643151
Strobe
3 Modes
12-24V DC
Red Polycarbonate
0646281
Model 601 XL
8" LED Strobe Light
4.71"
119.7mm
6.45"
163.7mm
17.00"±0.50"
432.0mm±12.7mm
8.40"
212.5mm
7.70"
196.0mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 3.70 Amps @ 12V DC; 2.00 Amps @ 24V DC
Flash Rate: Mode 1: 510 fpm; Mode 2: 252 fpm;
Mode 3: Rotating Beacon
Standards: ECE Reg. 65 (Mode 1 Amber Only),
SAE J845 (Warning-Class 1, Mode 1 Amber Only),
Buy America Compliant, Sealed to IP69K
Mounting: Universal mount
Available in Amber, Blue, or Green Lens
Function
ECE/SAE Strobe
Additional Information
3 Modes
Voltage
Lens
Part #
12-24V DC
Amber Polycarbonate
0646241
Strobe
3 Modes
12-24V DC
Blue Polycarbonate
0646251
Strobe
3 Modes
12-24V DC
Green Polycarbonate
0646261
101
Models 770 BLU & 770 RED
3" x 5" LED Spot Light
Introducing Two New Visual Safety Devices
Specifically designed for the material handling industry, the Model 770 BLU and Model 770 RED represent a new way
of thinking about visual safety devices.
Traditional visual warning devices (ex. strobes) are most effective when a pedestrian is able to see the forklift coming.
If they are not paying close attention or if there is a blind corner present, traditional visual warning devices really don’t
contribute much to preventing an accident.
The Model 770 BLU and 770 RED don’t rely at all on pedestrians being able to see the forklift. Instead, they project
a bright, highly concentrated beam pattern on the ground in the direction that the forklift is moving. We use red and
blue because studies have shown that they are two of the most noticeable colors to the human eye.
Features & Benefits
• Impact- and corrosion-resistant polycarbonate lens & housing
• Universal mounting bracket makes installation simple
• Long-lasting LEDs are extremely resistant to shock & vibration
• 770 RED emits a red light; 770 BLU emits a blue light
• Lifetime Limited Warranty provides peace of mind
• Extremely low current draw
• 12-48V DC multi-voltage configuration
• Sealed to IP67 to keep out dust & water
• Low profile for mounting in tight spaces
Material Handling Spot Light Usage Standards
• One unit should be mounted to both the front & back of vehicle
• Recommended beam pattern intensity: 830+ Lux (on the ground)
• Recommended mounting height: 6' 8"–8' 4" (~2.0m-2.5m)
• Recommended beam pattern distance: 14' 9"–17' 11" (~4.5m–5.5m)
102
Models 770 BLU & 770 RED
3" x 5" LED Spot Light
5.40"
137.1mm
0.82"
20.8mm
3.46"
87.9mm
3.85"
97.8mm
Light Source: LED
Input Voltage: 12-48V DC
Current Draw: 0.60 Amps @ 12V DC; 0.30 Amps @ 24V DC;
0.19 Amps @ 36V DC; 0.14 Amps @ 48V DC
Standards: SAE J1455 (Environmental), ECE Reg. 10 (Radiated
Emissions), CE Recognized, UL Recognized, Buy America
Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Function
Additional Information
5.68"
144.2mm
Voltage
Lens
Part #
Spot
Blue Spot
12-48V DC
Polycarbonate
1706311
Spot
Red Spot
12-48V DC
Polycarbonate
1706441
12" Wire Assembly for Blue & Red Spot
3267041
Replacement Mounting Kit - Black
8200121
Replacement Mounting Kit - Stainless Steel
8200101
103
Interior Lights
Dome Lights
Model 150
Page 106
Model 412
Page 111
Compartment
Lights
Courtesy Lights
104
Model 408
Page 109
Model 186
Page 107
Model 282
Page 108
Model 417
Page 112
Models 410/411
Page 110
Model 419
Page 113
Why Buy J.W. Speaker Interior Lights?
The Power of LEDs
J.W. Speaker’s interior LED lighting products offer an effective way to save energy while providing superior visibility inside of
your vehicle. Our interior lights feature state-of-the-art LEDs that give you a noticeably brighter look at your vehicle’s interior,
while using less energy than traditional bulb-based lighting. Additionally, LEDs will last longer and stand up to shock and
vibration that typically causes bulb-based lights to prematurely fail.
Low Light Solutions
For law enforcement and similar applications where you need to exit your vehicle and immediately carry out an action, we
have products that offer the benefit of emitting a soft red light. This prevents your eyes from experiencing the temporary
blindness of having to adjust from high to low lighting and can also help you to see the inside of your vehicle while driving
without losing visibility of the road.
Peace of Mind
All our LED interior lights come with a Lifetime Limited Warranty and are proudly made in the U.S.A. at our Germantown,
Wisconsin headquarters. You can read more about the Lifetime Limited Warranty on page 158.
105
Model 150
1" x 3" LED Dome Light
2.51"
63.8mm
1.36"
34.5mm
2.90"
73.7mm
0.98"
24.9mm
0.89"
22.6mm
WIRE LENGTH 118.00"±1.00"
3m
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.06 Amps @ 12V DC; 0.06 Amps @ 24V DC
Standards: Buy America Compliant
Mounting: Low profile mount
Voltage
12-24V DC
Additional Information
Light Only
Optional Mounting Bracket Assembly
106
Lens
Part #
Acrylic
0443051
5856032
Model 186
2.44"
62.0mm
2" x 3" LED Utility Light
2.84"
72.0mm
2.13"
54.0mm
1.50"
38.0mm
1.79"
45.4mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: : 0.11 Amps @ 12V DC; 0.11 Amps @ 24V DC
Standards: Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Voltage
12-24V DC
Additional Information
Lens
Part #
Polycarbonate
0442641
107
Model 282
2" x 9" LED Dome Light
7.68"
95.0mm
6.25"±0.50"
158.8mm±12.7mm
1.95"
49.4mm
8.50"
216.0mm
1.10"
28.0mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.50 Amps @ 12V; 0.50 Amps @ 24V
Standards: Buy America Compliant, Sealed to IP66
Mounting: Low profile mount
Voltage
12-24V DC
108
Additional Information
Lens
Part #
Acrylic
0442131
Model 408
2.76"
70.0mm
3" LED Compartment Light
2.00"
50.8mm
3.30"
83.8mm
1.61"
41.0mm
8.50"±0.50"
215.2mm±12.7mm
3.60"
90.6mm
0.78"±0.09"
19.2mm±2.3mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.40 Amps @ 12V; 0.21 Amps @ 24V
Standards: SAE J575 (Compartment), Buy America Compliant,
Sealed to IP67
Mounting: Universal mounting bracket
Special Note: Lamp automatically shuts down when
temperature exceeds 115°C
Voltage
1.00"
25.4mm
0.50"
11.6mm
Additional Information
Lens
Part #
12-24V DC
Light with Mounting Bracket
Glass
0442501
12-24V DC
Light without Mounting Bracket
Glass
0442541
109
Models 410 & 411
6.51"
165.4mm
3" x 7" LED Dome Light
2.97"
75.4mm
5.75"
146.1mm
Model 410
6.00"±0.25"
152.5mm±6.4mm
0.97"
24.6mm
Model 411 with
rocker switch
6.51"
165.4mm
2.97"
75.4mm
Model 411
with On/Off
button
5.75"
146.1mm
0.97"
24.6mm
6.00"±1.25"
152.5mm±6.4mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.14 Amps @ 12V DC; 0.09 Amps @ 24V DC
Standards: ECE Reg. 10 (Radiated Emissions),
Buy America Compliant
Mounting: Low profile mount
Voltage
110
Lens
Part #
12-24V DC
Model 410 without Switch
Additional Information
Polycarbonate
0443271
12-24V DC
Model 411 with On/Off Button
Polycarbonate
0443281
12-24V DC
Model 411 with On/Off/Door Rocker Switch
Polycarbonate
0443291
Model 412
2.25"
57.2mm
2" x 7" LED Dome Light
6.50"
165.1mm
0.45"
11.4mm
5.75"
146.1mm
5.92"±0.25"
150.4mm±6.3mm
1.09"
27.8mm
Light Source: LED
Input Voltage: 12-24V or 12-48V DC
Current Draw:
12-24V Version: 0.50 Amps @ 12V DC; 0.25 Amps @ 24V DC
12-48V Version: 0.50 Amps @ 12V DC; 0.25 Amps @ 24V DC;
0.18 Amps @ 36V DC; 0.13 Amps @ 48V DC
Standards: UL Recognized, Buy America Compliant,
Sealed to IP67
Mounting: Low profile mount
Special Note: Light comes with either Deutsch DT04-2P
connector or 7" bare leads
Lens
Part #
12-24V DC
Voltage
White without Switch, 7" Bare Leads, no Timer
Additional Information
Polycarbonate
0442511
12-48V DC
White with Switch, Deutsch Connector, 60 sec. Timer
Polycarbonate
0443041
12-48V DC
White with Switch, 7" Bare Leads, no Timer
Polycarbonate
0443011
12-48V DC
White with Switch, Deutsch Connector, 60 min. Timer
Polycarbonate
0443301
111
Model 417
5" x 8" Red/White LED Dome Light
7.60"
193.0mm
1.00"
25.4mm
3.70"
94.0mm
6.46"
164.0mm
11.50"±0.50"
291.0mm±12.7mm
4.84"
123.0mm
0.19"
4.8mm
1.14"
29.1mm
0.35"
8.9mm
Light Source: LED
Input Voltage: 12V, 24V, or 12-24V DC
Current Draw:
12V Version: 0.175 Amps (Red)/ 0.325 Amps (White) @ 12V DC
24V Version: 0.175 Amps (Red)/ 0.175 Amps (White) @ 24V DC
12-24V Version: 0.175 Amps (Red)/ 0.325 Amps (White) @
12V DC; 0.175 Amps (Red)/ 0.175 Amps (White) @ 24V DC
Standards: Buy America Compliant
Mounting: Low profile mount
Special Notes: Available with or without inner optics. Versions
with inner optics provide a more focused pattern, while those
without have a wider, smoother beam pattern.
White function has two intensity levels, red function has one.
Voltage
Additional Information
Lens
Part #
12V DC
Light with Inner Optics
Acrylic
0442261
24V DC
Light with Inner Optics
Acrylic
0442411
Light without Inner Optics
Acrylic
0443171
12-24V DC
112
Model 419
6" LED Dome Light
6.10"
155mm
1.40"
36.3mm
11.50"
291.5mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Red/White Version: 0.31 Amps (Red)/
0.61 (White) Amps @ 12V DC; 0.31 Amps (Red)/
0.61 Amps (White) @ 24V DC
White Only Version: 0.61 Amps @ 12V DC;
0.62 Amps @ 24V DC
Standards: Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Voltage
Additional Information
Lens
Part #
12-24V DC
Red/White Version
Polycarbonate
0442771
12-24V DC
White Only Version
Polycarbonate
0442401
113
Signal Lights
License Plate
Illuminators
Turn Signal
Model 125
Page 116
Model 151
Page 118
Clearance
& Marker
Model 150
Page 117
Model 157
Page 119
Model 206
Page 121
Model 217
Page 123
Model 232
Page 126
Model 245
Page 128
Models 260/261
Page 129,130
Model 170
Page 120
Model 224
Page 125
Model 270
Page 136
Model 775 XD
Page 143
Stop, Tail,
& Turn Signal
Stop, Tail, Turn
Signal, & Backup
Model 212
Page 122
Model 223
Page 124
Model 232
Page 126
Model 236
Page 127
Models 260/261
Page 129,130
Model 262
Page 130
Model 263
Page 132
Model 267
Page 135
Model 283
Page 140
Model 412
Page 141
Model 263
Page 126
Model 265
Page 133
Model 280
Page 138
Model 281
Page 139
Model 206
Page 121
Model 217
Page 123
Model 224
Page 125
Model 245
Page 128
Model 270
Page 136
Model 272
Page 137
Model 6042
Page 144
Stop & Tail
Backup
Model 217
Page 123
Model 224
Page 125
Rear Fog
Model 217
Page 123
Model 224
Page 125
Front Position
& Turn Signal
Model 223
Page 124
Model 412
Page 135
Marine
Model 450
Page 142
114
Model 232
Page 126
Model 245
Page 128
Models 260/261
Page 129,130
Models 260/261
Page 129,130
Daytime Running
Light & Front Position
Model 217
Page 123
Why Buy J.W. Speaker Signal Lights?
Reliability
You can rely on our signal lights because they’re built to withstand even the most rugged applications such as mining,
agriculture, and construction. The LEDs resist shock and vibration better than incandescent signal lights and the housings
are designed and manufactured to protect the internal components from the environmental impact of a tough and unforgiving
jobsite. Inside and out, you can trust our signal lights to function through whatever you need them for, which is why we back
them up with our Lifetime Limited Warranty (learn more about our warranty on page 158).
Improved Response Time
J.W. Speaker’s signal lights boast the latest and greatest in LED technology to emit a highly-visible signal that’s more
responsive than incandescent signal lights. The slight delay associated with charging and dimming of incandescent signal
lights is not at all present in our LED-based signal lights.
Meeting Standards
Our LED signal lights are made to meet or surpass various regulatory standards. Check the specifications for each product
to see which standards it meets, or contact us at +1 262.251.6660, or toll-free at 800.558.7288, for more information.
115
Model 125
4.50"
114.2mm
2" x 5" LED License Plate Illuminator
2.41"
61.2mm
2.39"
61.2mm
1.02"
25.9mm
6.73"
171mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.23 Max Amps @ 12V DC
Standards: SAE J587, ECE Reg. 4 (Plate), ECE Reg. 50
(Motorcycles), Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
ECE/SAE License Plate Illuminator
116
Additional Information
2.83"
71.9mm
Voltage
Lens
Part #
12-24V DC
Polycarbonate
0341181
Model 150
2.51"
63.8mm
1" x 3" LED Clearance & Side Marker Light
1.36"
34.5mm
2.90"
73.7mm
0.98"
24.9mm
0.89"
22.6mm
WIRE LENGTH 118.00"±1.00"
3m
Light Source: LED
Input Voltage: 12-24 DC
Current Draw: 0.09 Max Amps @ 12V DC
Standards: ECE Reg. 7 (Position & Stop), ECE Reg. 10
(Radiated Emissions, Amber Only), SAE J592 (Side Marker),
Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Special Note: Mounting bracket assembly required
Voltage
Lens
Part #
ECE/SAE Side Marker
Function
Light Only
12-24V DC
Amber Acrylic
0205341
ECE/SAE Side Marker
Light Only
12-24V DC
Red Acrylic
Mounting Bracket Assembly
Additional Information
0205321
5856032
117
Model 151
3.00"
75.8mm
2" x 3" LED License Plate Illuminator
1.47"
37.4mm
0.70"
19.0mm
1.48"
37.7mm
WIRE LENGTH
118.00"±1.00"
3m
1.97"
50.0mm
2.30"
57.3mm
0.50"
13.4mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.07 Max Amps @ 12V DC
Standards: FMVSS 108 (DOT Compliant), CMVSS 108
(Transport Canada Compliant), ECE Reg. 4 (Plate),
ECE Reg. 50 (Motorcycles), Buy America Compliant
Mounting: Low profile mount
Function
DOT/ECE License Plate Illuminator
118
Additional Information
Voltage
Lens
Part #
12-24V DC
Acrylic
0341281
Model 157
0.57"
14.4mm
0.99"
25.2mm
2.78"
70.5mm
3" x 5" LED Side Turn Signal Light
2.56"
65.0mm
0.58"
14.7mm
5.05"
128.2mm
1.15"
29.3mm
6.22"±1.00"
158.0mm±25.4mm
0.25"
6.3mm
2.80"
71.0mm
1.40"
35.5mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.41 Amps @ 12V DC; 0.20 Amps @ 24V DC
Standards: ECE Reg. 6 (Signal), SAE J592 (Side Marker),
SAE J595 (Warning), SAE J914 (Signal), SAE J2042 (Side
Marker), Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
Additional Information
Voltage
Lens
Part #
ECE/SAE Side Marker/Side Turn
12-24V DC
Amber Acrylic
0344461
ECE/SAE Side Turn
12-24V DC
Amber Acrylic
0344311
ECE/SAE Side Turn
12-24V DC
Clear Acrylic
0344301
119
Model 170
2" x 4" LED Side Marker Light
3.62"
91.9mm
1.88"
47.8mm
0.33"
8.4mm
0.47"
11.9mm
Light Source: LED
Input Voltage: 12V DC
Current Draw: 0.06 Amps @ 12V DC
Standards: ECE Reg. 3 (Reflector), ECE Reg. 91 (Side
Marker), SAE J592 (Side Marker), SAE J594 (Reflector),
Buy America Compliant
Mounting: Low profile mount
Function
Voltage
Lens
Part #
ECE/SAE Side Marker
12V DC
Amber Acrylic
0230731
ECE/SAE Side Marker
12V DC
Red Acrylic
0230721
120
Additional Information
23.00"±0.50"
584.2mm±12.7mm
Model 206
5" LED Double-Sided Signal Light
4.91"
124.7mm
1.14"
29.0mm
12.0"
304.8mm
0.91"
23.1mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Stop: 0.10 Amps @ 12V DC; 0.05 Amps @ 24V DC
Tail: 0.01 Amps @ 12V DC; 0.01 Amps @ 24V DC
Turn: 0.58 Amps @ 12V DC; 0.27 Amps @ 24V DC
Standards: ASABE 279.17, ECE Reg. 7 (Position & Stop),
SAE J96 (Turn), SAE J585 (Tail), SAE J586 (Stop), SAE J974
(Warning), SAE J2040 (Tail), Buy America Compliant,
Sealed to IP67
Mounting: Hollow stud mount
Voltage
Lens
Part #
ECE/SAE Stop/Tail
Function
Additional Information
Single Sided Light with Guard
12-24V DC
Red Polycarbonate
0342781
ECE/SAE Stop/Tail
Single Sided Light without Guard
12-24V DC
Red Polycarbonate
0342771
SAE Turn
Double Sided Light with Guard
12-24V DC
Amber Polycarbonate
0341931
SAE Turn
Double Sided Light without Guard
12-24V DC
Amber Polycarbonate
0341681
121
Model 212
5" LED Double-Sided Signal Lights in Bezel
3.17"
80.5mm
7.52"
191.1mm
5.49"
139.4mm
2.00"
50.8mm
9.03"
229.3mm
1.18"
29.9mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.61 Amps @ 12V DC; 0.30 Amps @ 24V DC
Standards: ASABE 279.17, ECE Reg. 7 (Position & Stop),
SAE J96 (Warning), SAE J585 (Tail), SAE J586 (Stop),
SAE J974 (Warning), SAE J2040 (Tail), Buy America
Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Special Note: This light is available in either a right hand (RH)
or left hand (LH) configuration
Function
Additional Information
Voltage
Lens
Part #
12-24V DC
Polycarbonate
0343341
ECE/SAE Stop/Tail/Turn
Retrofit for Models 297 & 288 - LH
ECE/SAE Stop/Tail/Turn
Retrofit for Models 297 & 288 - RH
12-24V DC
Polycarbonate
0343351
ECE/SAE Stop/Tail/Turn
Retrofit for Wesbar - LH
12-24V DC
Polycarbonate
0343401
ECE/SAE Stop/Tail/Turn
Retrofit for Wesbar - RH
12-24V DC
Polycarbonate
0343411
122
Model 217
2.85"
72.5mm
3" LED Signal Light
1.56"
39.7mm
25.12"
638.1mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Backup: 0.12 Amps @ 12V DC; 0.07 Amps @ 24V DC
DRL & Front Position:
0.55 Amps (DRL)/ 0.05 (Front Position) @ 12V DC;
0.30 Amps (DRL)/ 0.03 Amps (Front Position) @ 24V DC
Rear Fog: 0.15 Amps @ 12V DC; 0.08 Amps @ 24V DC
Stop & Tail:
0.10 Amps @ 12V DC (Stop)/ 0.03 Amps (Tail) @ 12V DC;
0.05 Amps (Stop)/ 0.02 Amps (Tail) @ 24V DC
Turn Signal: 0.20 Amps @ 12V DC; 0.10 Amps @ 24V DC
Standards: ECE Reg. 6 (Signal), ECE Reg. 7 (Front Position &
Stop), ECE Reg. 23 (Backup), ECE Reg. 38 (Fog),
ECE Reg. 87 (DRL), CE Recognized, Buy America
Compliant, Sealed to IP67
Mounting: Universal mount
LAMP IN 90MM ADAPTER RING
1.88"
47.7mm
0.87"
22.0mm
1.77"
45.0mm
3.54"
90.0mm
Function
Voltage
Lens
Part #
Without 90mm Adapter Ring
12-24V DC
Clear Polycarbonate
0345421
ECE DRL & Front Position
With 90mm Adapter Ring
12-24V DC
Clear Polycarbonate
0345451
ECE DRL & Front Position
Without 90mm Adapter Ring
12-24V DC
Clear Polycarbonate
0345461
ECE Rear Fog
Without 90mm Adapter Ring
12-24V DC
Red Polycarbonate
0345431
ECE Backup
Additional Information
ECE Rear Fog
Without 90mm Adapter Ring
12-24V DC
Clear Polycarbonate
0345511
ECE Stop & Tail
Without 90mm Adapter Ring
12-24V DC
Red Polycarbonate
0345411
ECE Turn Signal
Without 90mm Adapter Ring
12-24V DC
Amber Polycarbonate
0345441
ECE Turn Signal
With 90mm Adapter Ring
12-24V DC
Amber Polycarbonate
0345521
123
Model 223
5.00"
127.0mm
5" x 5" LED Signal Light
5.00"
127.0mm
11.44"±0.50"
290.6mm±12.7mm
4.70"
119.5mm
0.82"
20.7mm
1.08"
27.4mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Front Position: 0.25 Amps @ 12V DC
Stop: 0.33 Amps @ 12V DC; 0.15 Amps @ 24V DC
Tail: 0.13 Amps @ 12V DC; 0.05 Amps @ 24V DC
Turn: 2.93 Amps @ 12V DC; 1.71 Amps @ 24V DC
Standards: ECE Reg. 3 (Reflector), ECE Reg. 6 (Signal),
ECE Reg. 7 (Position & Stop), SAE J575 (Stop, Tail & Turn),
SAE J585 (Tail), SAE J586 (Stop), SAE J588 (Turn),
SAE J594 (Reflector), Buy America Compliant, Sealed IP67
Mounting: Low profile mount
Voltage
Lens
Part #
ECE Front Position/Front Turn
Function
12-24V DC
White/Amber Acrylic
0341711
ECE/SAE Stop/Tail/Turn
12-24V DC
Red/Amber Acrylic
0341701
124
Additional Information
Model 224
5.00"
127.0mm
3.10"
78.7mm
5" x 5" LED Signal Light
3.10"
78.7mm
5.00"
127.0mm
0.96"
24.4mm
0.81"
20.6mm
4.70"
119.5mm
11.45"±0.50"
290.8mm±12.7mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Backup: 0.15 Amps @ 12V DC; 0.08 Amps @ 24V DC
Rear Fog: 0.34 Amps @ 12V DC; 0.16 Amps @ 24V DC
Stop: 0.19 Amps @ 12V DC
Tail: 0.03 Amps @ 12V DC
Turn: 0.30 Amps @ 12V DC
Standards: ASABE 279.14 (Stop & Tail), ECE Reg. 3
(Reflector), ECE Reg. 6 (Signal), ECE Reg. 7 (Position &
Stop), ECE Reg. 23 (Reverse), SAE J588 (Turn), SAE J593
(Backup), SAE J594 (Reflector), SAE J974 (Warning),
SAE J2040 (Tail), SAE J2261 (Stop & Turn), Buy America
Compliant, Sealed to IP67
Mounting: Low profile mount
Voltage
Lens
Part #
ECE/SAE Backup
Function
Additional Information
12-24V DC
Clear Acrylic
0442611
ECE/SAE Stop/Tail
12-24V DC
Red Acrylic
0342301
ECE/SAE Turn
12-24V DC
Amber Acrylic
0342291
Rear Fog
12-24V DC
Red Acrylic
0342361
125
Model 232
5.90"
149.6mm
6" LED Signal Light
5.17"
131.3mm
1.00"
25.3mm
11.50"
291.0mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Backup: 0.40 Amps @ 12V DC; 0.23 Amps @ 24V DC
Stop: 0.19 Amps @ 12V DC; 0.08 Amps @ 24V DC
Tail: 0.03 Amps @ 12V DC; 0.02 Amps @ 24V DC
Turn: 0.38 Amps @ 12V DC; 0.17 Amps @ 24V DC
Standards: ECE Reg. 6 (Signal), ECE Reg. 7 (Position &
Stop), ECE Reg. 10 (Radiated Emissions), ECE Reg. 23
(Reverse), SAE J585 (Tail), SAE J586 (Stop), SAE J588
(Turn), SAE J593 (Backup), Buy America Compliant
Mounting: Low profile mount
Function
ECE/SAE Backup
Additional Information
Voltage
Lens
Part #
12-24V DC
Clear Polycarbonate
0443071
ECE/SAE Stop/Tail/Turn
12-24V DC
Red Polycarbonate
0341991
ECE/SAE Turn
12-24V DC
Amber Polycarbonate
0342001
126
Model 236
3.15"
80mm
5" x 5" LED Stop, Tail, & Turn Light
4.58"
116.3mm
4.74"
120.3mm
9.49"±0.51"
241mm±13mm
1.43"
36.3mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Stop: 0.35 Amps @ 12V DC
Tail: 0.13 Amps @ 12V DC
Turn: 1.30 Amps @ 12V DC
Standards: ECE Reg. 3 (Reflector), ECE Reg. 6 (Signal),
ECE Reg. 7 (Position & Stop), Buy America Compliant,
Sealed to IP67
Mounting: Low profile mount
Special Note: Integrated reflex reflector
Function
Additional Information
Voltage
Lens
Part #
ECE Stop/Tail/Turn
12-24V DC
Red Acrylic
0343151
ECE Stop/Tail/Turn/
License Plate Illuminator
12-24V DC
Red Acrylic
0343141
127
Model 245
5" x 7" LED Signal Light
4.68"
118.9mm
6.55"
166.4mm
1.99"
50.5mm
11.33"±0.50"
287.8mm±12.7mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Backup: 0.40 Amps @ 12V DC; 0.23 Amps @ 24V DC
Stop: 0.17 Amps @ 12V DC; 0.09 Amps @ 24V DC
Tail: 0.01 Amps @ 12V DC; 0.03 Amps @ 24V DC
Turn: 0.35 Amps @ 12V DC; 0.23 Amps @ 24V DC
Standards: ECE Reg. 6 (Signal), ECE Reg. 7 (Position &
Stop), ECE Reg. 23 (Reverse), SAE J575 (Signal),
SAE J585 (Tail), SAE J586 (Stop), SAE J588 (Turn),
SAE J593 (Backup), Buy America Compliant, Sealed IP67
Mounting: Low profile mount
Special Note: Light comes with either Packard (#1211029)
harness with 18" bare leads or 3-pin Deutsch harness with
11" bare leads
Function
128
Additional Information
Voltage
Lens
Part #
ECE/SAE Backup
Light with Deutsch Harness
12-24V DC
Clear Polycarbonate
0443081
ECE/SAE Stop/Tail
Light with Deutsch Harness
12-24V DC
Red Polycarbonate
0343911
ECE/SAE Stop/Tail
Light with Packard Harness
12-24V DC
Red Polycarbonate
0340881
ECE/SAE Turn
Light with Deutsch Harness
12-24V DC
Amber Polycarbonate
0343921
ECE/SAE Turn
Light with Packard Harness
12-24V DC
Amber Polycarbonate
0340871
Model 260
7.60"
193.0mm
5" x 8" LED Signal Light
3.70"
94.0mm
6.46"
164.0mm
12.42"±0.59"
315.5mm±15.0
4.80"
123.0mm
1.10"
27.5mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Backup: 0.65 Amps @ 12V DC; 0.38 Amps @ 24V DC
Rear Fog: 0.26 Amps @ 12V DC; 0.14 Amps @ 24V DC
Stop: 0.65 Amps @ 12V DC; 0.38 Amps @ 24V DC
Turn: 0.65 Amps @ 12V DC; 0.38 Amps @ 24V DC
Tail: 0.65 Amps @ 12V DC; 0.38 Amps @ 24V DC
Standards: ECE Reg. 3 (Reflector), ECE Reg. 6 (Signal),
ECE Reg. 7 (Position & Stop), SAE J585 (Tail), SAE J586
(Stop), SAE J2040 (Tail), SAE J2261 (Stop & Turn),
SAE J593 (Backup), Buy America Compliant, Sealed IP67
Mounting: Low profile mount
Function
Additional Information
Voltage
Lens
Part #
ECE/SAE Backup
12-24V DC
Clear Acrylic
0443031
ECE/SAE Rear Fog
12-24V DC
Red Acrylic
0342271
ECE/SAE Stop/Tail
12-24V DC
Red Acrylic
0339371
ECE/SAE Turn
12-24V DC
Amber Acrylic
0339381
129
Model 261
0.76"
19.3mm
5" x 8" LED Signal Light in Mounting Frame
6.46"
164.1mm
5.20"
132.1mm
3.70"
94.0mm
8.01"
203.5mm
2.36"
59.9mm
1.44"
36.6mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.65 Amps @ 12V DC; 0.38 Amps @ 24V DC
Standards: ECE Reg. 3 (Reflector), ECE Reg. 6 (Signal),
ECE Reg. 7 (Position & Stop), SAE J585 (Tail), SAE J586
(Stop), SAE J2040 (Tail), SAE J2261 (Stop & Turn),
SAE J593 (Backup), Buy America Compliant, Sealed IP67
Mounting: Low profile mount
Function
ECE/SAE Backup
130
Additional Information
Voltage
Lens
Part #
12-24V DC
Clear Acrylic
0341251
ECE/SAE Stop/Tail
12-24V DC
Red Acrylic
0341231
ECE/SAE Turn
12-24V DC
Amber Acrylic
0341241
Model 262
0.79"
20.1mm
5" x 8" LED Stop, Tail, & Turn Light
in Mounting Frame
1.44"
36.6mm
15.91"
404.1mm
6.46"
164.1mm
3.70"
94.0mm
1.44"
36.6mm
2.36"
59.9mm
5.20"
132.1mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.65 Amps @ 12V DC; 0.38 Amps @ 24V DC
Standards: ECE Reg. 3 (Reflector), ECE Reg. 6 (Signal),
ECE Reg. 7 (Position & Stop), SAE J585 (Tail), SAE J586
(Stop), SAE J2040 (Tail), SAE J2261 (Stop & Turn),
Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
ECE/SAE Stop/Tail/Turn
Additional Information
Voltage
Lens
Part #
12-24V DC
Amber/Red Acrylic
0341221
131
Model 263
0.79"
20.1mm
5" x 24" LED Signal Light in Mounting Frame
23.82"
605.0mm
6.46"
164.1mm
1.44"
36.6mm
3.70"
94.0mm
5.20"
132.1mm
1.44"
36.6mm
2.36"
59.9mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.65 Amps @ 12V DC; 0.38 Amps @ 24V DC
Standards: ECE Reg. 3 (Reflector), ECE Reg. 6 (Signal),
ECE Reg. 7 (Position & Stop), SAE J585 (Tail), SAE J586
(Stop), SAE J593 (Backup), SAE J2040 (Tail), SAE J2261
(Stop & Turn), Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
Voltage
Lens
Part #
ECE/SAE Stop/Tail/Turn
12-24V DC
Red/Amber/Red Acrylic
0343791
ECE/SAE Stop/Tail/Turn/Backup
12-24V DC
Red/Amber/Clear Acrylic
0341211
132
Additional Information
Model 265
11.32"
287.5mm
4" x 11" LED Stop, Tail, Turn & Backup
0.81"
20.6mm
7.03"±0.25"
178.6mm±6.4mm
5.38"
136.7mm
1.33"
33.8mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Backup: 0.33 Amps @ 12V DC; 0.35 Amps @ 24V DC
Stop: 0.33 Amps @ 12V DC; 0.20 Amps @ 24V DC
Tail: 0.06 Amps @ 12V DC; 0.04 Amps @ 24V DC
Turn: 0.43 Amps @ 12V DC; 0.33 Amps @ 24V DC
Standards: ASABE 279.17, ECE Reg. 3 (Reflector),
ECE Reg. 6 (Signal), ECE Reg. 7 (Position & Stop),
ECE Reg. 23 (Reverse), SAE J575 (Stop, Tail, Turn &
Backup), SAE J585 (Tail), SAE J586 (Stop), SAE J588 (Turn),
SAE J593 (Backup), SAE J594 (Reflector), SAE J2040 (Tail),
SAE J2261 (Stop & Turn), Buy America Compliant,
Sealed to IP67
Mounting: Low profile mount
Function
ECE/SAE Stop/Tail/Turn/Backup
Additional Information
Voltage
Lens
Part #
12-24V DC
Clear/Red/Amber Acrylic
0342421
133
Model 265
Optional Mounting Bracket Assemblies
Hino Retrofit Kit
0.50"
12.7mm
5.88"
149.2mm
5.88"
149.2mm
2.80"
71.2mm
1.50"
38.1mm
6.30"
160.0mm
0.38"
9.5mm
7.00"
177.8mm
19.11"±0.25"
485.5mm±6.3mm
12.99"
329.8mm
Mitsubishi Retrofit Bracket
0.21"
5.5mm
12.75"
323.9mm
5.88"
149.2mm
20.17"±0.25"
512.4mm±6.3mm
0.09"
2.3mm
Nissan Retrofit Bracket
.75"
19.1mm
2.25"
57.2mm
5.50"
139.7mm
7.50"
190.5mm
5.75"
146.1mm
Description
1.50"
38.1mm
.75"
19.1mm
8.63"
219.1mm
20.52"±.25"
521.3mm±6.3mm
.43"
10.8mm
Part Number
Optional Mounting Bracket Assembly for Hino Truck
6144350
Optional Mounting Bracket Assembly for Nissan Truck
6144360
Optional Mounting Bracket Assembly for Mitsubishi Truck
6144370
134
Model 267
10.94"
277.9mm
4" x 11" LED Stop, Tail & Turn Light
80.90"±0.50"
2055mm±12.7mm
4.50"
114.3mm
0.87"
22.1mm
3.88"
98.6mm
1.33"
33.8mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Stop: 0.38 Amps @ 12V DC; 0.25 Amps @ 24V DC
Tail: 0.08 Amps @ 12V DC; 0.05 Amps @ 24V DC
Turn: 0.45 Amps @ 12V DC; 0.33 Amps @ 24V DC
Standards: ASABE 279.17, ECE Reg. 3 (Reflector),
ECE Reg. 6 (Signal), ECE Reg. 7 (Position & Stop),
SAE J575 (Stop, Tail & Turn), SAE J585 (Tail), SAE J586
(Stop), SAE J588 (Turn), SAE J594 (Reflector),
Buy America Compliant
Mounting: Low profile mount
Function
ECE/SAE Stop/Tail/Turn
Additional Information
Voltage
Lens
Part #
12-24V DC
Red/Amber Acrylic
0339711
135
Model 270
5.75"
146.1mm
3" x 7" LED Signal Light
3.19"
80.9mm
2.13"
54.1mm
2.03"
51.5mm
16.50"±12.7"
419.1mm±12.7mm
6.73"
170.8mm
Light Source: LED
Input Voltage: 12V or 24-36V DC
Current Draw:
Park: 0.50 Amps @ 12V DC
Stop: 0.07 Amps @ 12V DC; 0.07 Amps @ 24V DC;
0.05 Amps @ 36V DC
Tail: 0.01 Amps @ 12V DC; 0.01 Amps @ 24V DC;
0.01 Amps @ 36V DC
Turn: 0.50 Amps @ 12V DC
Standards: ASABE 279.17, ECE Reg. 6 (Signal), ECE Reg. 7
(Position & Stop), SAE J96 (Warning), SAE 585 (Stop & Tail),
SAE J586 (Stop), SAE J588 (Turn), SAE J594 (Reflector),
SAE J914 (Signal), SAE J974 (Warning), SAE J1889 (Signal),
SAE J2040 (Tail), SAE J1957 (Stop & Tail), SAE J2261 (Stop
& Turn), SAE J278 (Stop & Tail), SAE J279 (Stop & Tail),
SAE J575 (Signal), Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
136
Additional Information
Voltage
Lens
Part #
ECE/SAE Stop/Tail
12V DC
Red Acrylic
0341361
ECE/SAE Stop/Tail
24-36V DC
Red Acrylic
0342061
ECE/SAE Turn
12V DC
Amber Acrylic
0341341
SAE Turn/Park
12V DC
Amber Acrylic
0341881
Model 272
2" x 7" LED Signal Light
6.49"
164.8mm
2.28"
58.0mm
1.57"
40.0mm
0.27"
6.9mm
Light Source: LED
Input Voltage: 12V or 24V DC
Current Draw:
Stop: 0.21 Amps @ 12V DC; 0.22 Amps @ 24V DC
Tail: 0.02 Amps @ 12V DC; 0.02 Amps @ 24V DC
Turn: 0.21 Amps @ 12V DC; 0.22 Amps @ 24V DC
Standards: ASABE 279.17, ECE Reg. 6 (Signal),
ECE Reg. 7 (Position & Stop), SAE J96 (Warning), SAE J575
(Signal), SAE J585 (Tail), SAE J586 (Stop), SAE J588 (Turn),
SAE J974 (Warning), SAE J1889 (Signal), SAE J2261 (Stop
& Turn), SAE J2040 (Tail), Buy America Compliant,
Sealed to IP67
Mounting: Low profile mount
Function
ECE/SAE Stop/Tail
Additional Information
Voltage
Lens
Part #
12V DC
Red Polycarbonate
0341811
ECE/SAE Stop/Tail
24V DC
Red Polycarbonate
0343171
ECE/SAE Turn
12V DC
Amber Polycarbonate
0341801
ECE/SAE Turn
24V DC
Amber Polycarbonate
0343181
137
Model 280
1.93"
49.0mm
2" x 7" LED Stop, Tail, Turn, & Backup Light
7.45"
189.2mm
1.61"
40.8mm
0.40"
9.8mm
0.87"
22.0mm
1.00"
26.6mm
Light Source: LED
Input Voltage: 12V or 24-36V DC
Current Draw:
Backup: 0.09 Amps @ 12V DC; 0.05 Amps @ 24V DC;
0.06 Amps @ 36V DC
Stop: 0.11 Amps @ 12V DC; 0.06 Amps @ 24V DC;
0.05 Amps @ 36V DC
Tail: 0.02 Amps @ 12V DC; 0.02 Amps @ 24V DC;
0.01 Amps @ 36V DC
Turn: 0.11 Amps @ 12V DC; 0.06 Amps @ 24V DC;
0.05 Amps @ 36V DC
Standards: UL Recognized, Buy America Compliant
Mounting: Low profile mount
Special Note: Includes integrated Packard (#12052848)
connector
Function
138
Additional Information
6.85"
174.0mm
0.19"
4.8mm
0.40"
9.5mm
Voltage
Lens
Part #
Stop/Tail/Turn/Backup
12V DC
Red/Clear Acrylic
0337241
Stop/Tail/Turn/Backup
24-36V DC
Red/Clear Acrylic
0341021
Model 281
1.95"
49.4mm
2" x 9" LED Stop, Tail, Turn, & Backup Light
8.50"
216.0mm
1.10"
28.0mm
12.00"±0.98"
304.8mm±0.3mm
7.68"±0.02"
195.0mm±0.8mm
Light Source: LED
Input Voltage: 12V, 24-36V, or 48V DC
Current Draw: 0.40 Amps @ 12V DC; 0.40 Amps @ 24V DC;
0.40 Amps @ 36V DC; 0.40 Amps @ 48V DC
Standards: UL Recognized, Buy America Compliant,
Sealed to IP67
Mounting: Low profile mount
Special Note: Includes 12" bare leads
Function
Stop/Tail/Turn/Backup
0.23"
5.73mm
Additional Information
Voltage
Lens
Part #
2 Light Kit with 2 Amp Flasher
12V DC
Red/Clear Acrylic
0338071
Stop/Tail/Turn/Backup
2 Light Kit with 2 Amp Flasher
48V DC
Red/Clear Acrylic
0339021
Stop/Tail/Turn/Backup
Single Light without Flasher
12V DC
Red/Clear Acrylic
0338061
Stop/Tail/Turn/Backup
Single Light without Flasher
24-36V DC
Red/Clear Acrylic
0338091
Stop/Tail/Turn/Backup
Single Light without Flasher
48V DC
Red/Clear Acrylic
0339011
139
Model 283
1.95"
49.4mm
2" x 9" LED Stop, Tail, & Turn Light
8.50"
216.0mm
1.10"
28.0mm
119.50"
3035.3mm
7.68"±0.02"
195.0mm±0.8mm
Light Source: LED
Input Voltage: 12V or 24V DC
Current Draw: 0.40 Amps @ 12V DC; 0.40 Amps @ 24V DC
Standards: ECE Reg. 6 (Signal), ECE Reg. 7 (Position &
Stop), Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
140
Additional Information
0.23"
5.73mm
Voltage
Lens
Part #
ECE Stop/Tail/Turn
12V DC
Red/Clear Polycarbonate
0339741
ECE Stop/Tail/Turn
24V DC
Red/Clear Polycarbonate
0339921
Model 412
2.25"
57.2mm
2" x 7" LED Signal Light
6.50"
165.1mm
0.45"
11.4mm
5.75"
146.1mm
5.92"±0.25"
150.4mm±6.3mm
1.09"
27.8mm
Light Source: LED
Input Voltage: 12-48V DC
Current Draw: 0.21 Amps @ 12V DC; 0.10 Amps @ 24V DC;
0.07 Amps @ 36V DC; 0.08 Amps @ 48V DC
Standards: ECE Reg. 6 (Signal), ECE Reg. 7 (Position &
Stop), UL Recognized, Buy America Compliant,
Sealed to IP67
Mounting: Low profile mount
Function
Additional Information
Voltage
Lens
Part #
ECE Front Position/Front Turn
12-48V DC
Amber/Clear Polycarbonate
0343121
ECE Stop/Tail/Turn
12-48V DC
Amber/Red Polycarbonate
0343101
141
Model 450
7.80"
197.0mm
1" x 5" and 1" x 8" LED Marine Signal Lights
1.70"
42.1mm
12.00"±1.00"
300.0mm±25.0mm
1.30"
34.2mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 0.21 Amps @ 12V; 0.10 Amps @ 24V
Standards: ABYC (A-16), USCG (COLOREG),
Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
Port
142
Additional Information
Red Light, 1" x 8"
Voltage
Lens
Part #
12-24V DC
Clear Polycarbonate
0230681
Starboard
Green Light, 1" x 8"
12-24V DC
Clear Polycarbonate
0230691
Stern
White Light, 1" x 5"
12-24V DC
Clear Polycarbonate
0230701
Model 775 XD
3.92"
99.7mm
3" x 5" LED Worklight & Turn Signal
7.10"
180.4mm
Light Source: LED
Raw Output: 600 Lumens
Effective Output: 400 Lumens
Input Voltage: 12-48V DC
Current Draw: 1.20 Amps @ 12V DC; 0.60 Amps @ 24V DC;
0.40 Amps @ 36V DC; 0.30 Amps @ 48V DC
Standards: ECE Reg. 6 (Signal), ECE Reg. 10 (Radiated
Emissions), SAE J1113 (Radiated Emissions - 13 up to 8V
contact/15KV air discharge), SAE J1455 (Environmental 4.13.1.1.1 steady state jump starts), CE CISPR (12/22),
UL Listed, Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Function
Additional Information
Spot & Turn
10.95"±1.50"
278.1mm±12.7mm
2.30"
58.5mm
Voltage
Lens
Part #
12-48V DC
Polycarbonate
1706301
Replacement Mounting Kit
Black
8200121
Replacement Mounting Kit
Stainless Steel
8200101
143
Model 6042
4.5" (PAR36) LED Stop & Tail Light
4.45"
113.0mm
0.86"
22.0mm
6.22±.50"
158.2±12.7mm
1.70"
43.2mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw:
Stop: 0.17 Amps @ 12V DC; 0.18 Amps @ 24V DC
Tail: 0.01 Amps @ 12V DC; 0.01 Amps @ 24V DC
Standards: SAE J585 (Tail), SAE J586 (Stop),
Buy America Compliant, Sealed to IP67
Mounting: Low profile mount
Function
SAE Stop/Tail
144
Additional Information
Voltage
Lens
Part #
12-24V DC
Red Polycarbonate
0343211
Visit Us Online
www.jwspeaker.com
Check Out Our Online Spec Sheets
While many customers utilize our print catalog as a resource for product information, we highly recommend that you
also take advantage of the information available on our website. Our website features detailed product specification
sheets which are more in-depth than the information you'll find in our printed catalog.
The Anatomy of a J.W. Speaker Spec Sheet
Model Information
Model 7150
5" x 7" Oval LED Worklight
Product Image
Product List
Model Number
7150-12V
7150-24V
Description
12V LED Worklight
24V LED Worklight
Features & Benefits
4,500 Raw Lumens; 3,000 Effective Lumens
Available in 12V DC or 24V DC configurations
Flood, Spot & Trapezoid beam patterns available
Your choice of durable glass or polycarbonate (amber or clear) lens options
Rugged solid state LEDs can withstand shock & vibration
Long-lasting LEDs mean never having to replace another bulb again!
Die-cast magnesium housing provides maximum protection
Universal pedestal mount
Available in a Combine Retrofit Kit (see online Photo Gallery)
Overvoltage Protection: 150V peak for 400ms duration, 5 pulses at a 10s interval
“XL” version for extreme industrial conditions also available
General Specifications
Dimension
Drawing
Lens Pattern :
Lens Material :
Housing Material :
Mounting Hardware:
Mounting :
Connector:
Mating Connector:
Flood, Spot, or Trapezoid
Glass or Polycarbonate
Die-Cast Magnesium
(x1) 1/2" Mounting Bolt
Universal Pedestal Mount
Integrated 2-Pin Deutsch Weather-Proof Socket (DT04-2P)
2-Pin Deutsch Weather-Proof Plug (DT06-2S)
Technical Specifications
12V Version
12V DC Input
9-16V DC Operating Voltage
6.50 Amps @ 12V DC
Raw Lumen Output: 4,500
Effective Lumen Output: 3,000
Standards
Compliance
24V Version
24V DC Input
20-32V DC Operating Voltage
3.00 Amps @ 24V DC
Raw Lumen Output: 4,500
Effective Lumen Output: 3,000
Features & Benefits
General
Specifications
Technical
Specifications
Standards Compliance
Buy America Compliant
SAE J1113
Sealed to IP67
SAE J575
SAE J1455
Applications
Additional
Information
Product
Configurations
Agricultural
Forestry
Military
Recreational
Construction
Industrial
Mining
Specialty Trucks
Fire & Rescue
Lawn & Garden
Off-Highway
Utility
Application
Recommendations
Additional Info
Wires: Red=Positive, Black=Negative
Transient Spike Protection: 150V Peak @ 1 HZ-100 Pulses
Dimensions in inches (mm in parentheses).
Dimensions are for reference only.
J.W. Speaker Corporation Germantown, WI 53022 • www.jwspeaker.com • 262-251-6660 • [email protected] _____
Contact
Information
145
Thermal Imaging
How Does it Work?
Thermal Imaging cameras detect subtle differences in temperature and display them
as black and white. Warmer objects appear light and cooler objects appear dark.
Notice how the ice in the girl’s left hand appears completely black. The differences
in heat don’t have to be significant for a thermal imaging camera to see them clearly
either. The slightest friction from the girl's finger and heat from her hand leaves enough
warmth on the wall to show up clearly to the thermal imaging camera. Just imagine
how much more heat vehicles, people, and animals give off!
See 4X Further Than Headlights!
Even under ideal conditions, headlights only allow drivers to see about 450 feet straight ahead. Driver visibility is limited
by the beam pattern of the headlights. It is also possible to outrun your headlights when driving at highway speeds.
Thermal imaging cameras provide you with the necessary visibility to see pedestrians and wildlife over 1,000 feet
away and vehicles even further—giving you more time to react, and more room to stop. They provide you with
superior visibility in dark or extreme environments where headlights fall short—conditions such as rain, snow, fog, or
smoke. Because thermal imaging cameras don’t rely on light, you can see clearly up to 1,800 feet in total darkness!
Greater Safety = Greater Profits
In today’s high-cost world, a single accident can have a significant impact on your profitability. Insurance deductibles,
equipment downtime, worker’s compensation, and lawsuits can all add up rather quickly. We understand that you
want to protect your assets and maximize your profits using best-in-class safety equipment and programs to avoid
costly accidents.
146
Model 9790
6.15"
156.2mm
Thermal Imaging System
Thermal Imaging
Camera
1.14"
29.1mm
3.62"
91.9mm
6.39"
162.5mm
8.00"
203.3mm
Monitor
Sensor Type: 320 x 240 Uncooled Microbolometer
Input Voltage: 12-24V DC
Field of View: 36° Horizontal x 27° Vertical
Spectral Band: 8-14 Microns (LWIR)
Video: Standard NTSC (9790)
Frame Rate: 30 Hz (9790)
Power Dissipation: 6W Max (Camera); 12W Max (Monitor)
Operating Temperature: -40°C to 80°C
Standards: Buy America Compliant, Sealed to IP67
Mounting: Universal pedestal mount
Special Note: Includes 12V power auxilary video outputs for
an external monitor
Voltage
Additional Information
3.00"
76.2mm
Part #
12-24V DC
Thermal Imaging Camera with Monitor
1705311
12-24V DC
Thermal Imaging Camera without Monitor
1705301
147
Electronics
EMI Filters
Model 631
Page 150
Wig-Wag Modules
Model 6170
Page 151
Electronic Flashers
Model 6310
Page 152
Converters
Model 6400
Page 153
148
Why Buy J.W. Speaker Electronics?
A Complete Solution
Not only does J.W. Speaker produce lights, but we also manufacture electronics to work with them. Buying J.W. Speaker
electronics ensures that the lights and electronics have full compatibility and harmonization.
Dependability
You can rest assured that all J.W. Speaker electronics are made with the same quality as our lighting products. Our electronic
flashers, wig-wag modules, and converters are specifically designed to function in rugged applications and are extensively
tested to comply with SAE, ECE, and Ingress Protection standards where applicable.
Made in the U.S.A.
All of our electronics are proudly made at our headquarters in Germantown, Wisconsin. We maintain the highest quality
standards in our production facilities, and we back our electronics with a Lifetime Limited Warranty (learn more about our
warranty on page 158).
149
Model 631
0.65"
16.6mm
1.31"
111.0mm
1" x 4" EMI Filter
4.37"
111.0mm
3.88"
98.6mm
1.13"
28.7mm
Voltage Limit: 50V DC
Wire Gauge: 16 Gauge
Standards: Buy America Compliant
Mounting: Low profile mount
Special Note: Used to reduce electromagnetic interference in
vehicle applications
Voltage
Additional Information
EMI Filter
150
Part #
0829411
Model 6170
4.86"
123.4mm
Daytime Running Light Wig-Wag Module
0.29"
7.4mm
2.88"
73.2mm
3.46"
87.9mm
4.20"
106.7mm
1.75"
44.5mm
5.44"
138.2mm
0.81"
20.6mm
1.95"
49.5mm
Input Voltage: 12-24V DC
Output Voltage: 5.00 Amps per side
Input Current: 15 Amps Max
Output Current: 0-5 Amps/Channel
DRL Frequency: 120 Hz +/- 10%
DRL Duty Cycle: 60% +/- 5%
Wig Wag Frequency: : 1.5 Hz +/- 10% (Normal);
3.0 Hz +/- 10% (Fast)
Wig Wag Duty Cycle: 50% +/- 10%
Standards: ECE Reg. 10 (Radiated Emissions), SAE J2139
(Signal), Buy America Compliant
Mounting: Low profile mount
Special Notes: The Wig-Wag Module controls high beam and
marker lights. Wig-Wag mode flashes driver and passenger
side high beam & marker lights alternately at either normal
(1.5 Hz), or fast (3.0 Hz) speed. High beam switch overrides
Wig-Wag and DRL modes.
Voltage
12-24V DC
Additional Information
Part #
0842191
151
Model 6310
Electronic Flasher
1.25"
31.8mm
2.39"
60.7mm
1.25"
31.8mm
3.25"
82.5mm
5.25"±.5"
133.4mm±12.7mm
Input Voltage: 12-24V DC
Max Current Draw: 15.00 Amps @ 12V DC;
15.00 Amps @ 24V DC
Flash Rate: 70 +/- 10 fpm
Standards: SAE J2139 (Signal), MIL-STD-461 (F),
Buy America Compliant
Mounting: Low profile mount
Special Note: Standard high-power FET output protects
against short circuit and overheating
Voltage
12-24V DC
152
Additional Information
3.88"
98.6mm
4.31"
109.5mm
Part #
0841911
Model 6400
DC/DC Converter
12.7"±0.50"
180.0mm±7.1mm
4.71"
120.0mm
Input Voltage: 24-48V DC
Output Voltage: 12V DC
Standards: Buy America Compliant
Mounting: Low profile mount
Voltage
Additional Information
Part #
24-48V DC
Delivers up to 115 Watts
0841541
153
Model MB735
48" Heavy Duty LED Light Bar with 1 Strobe
47.50"
1206.5mm
Light Source: LED
Input Voltage: 12V DC
Current Draw:
Model 281: 0.80 Amps @ 12V DC
Model 735: 7.00 Amps @ 12V DC
Model 7150: 12.00 Amps @ 12V DC
Model 601: 3.70 Amps @ 12V DC
Standards: Buy America Compliant
Mounting: 2 blind rivets on each side for M8 mounting bolt
Configuration: (x2) Model 735 Flood Worklights, (x2) Model
7150 Trap Worklights, (x2) Model 281 Signal Lights, and
(x1) Model 601 Strobe Light
2.00"
50.8mm
9.57"
243.1mm
8.43"
214.1mm
154
Voltage
Additional Information
12V DC
Light Bar with Amber Strobe
Part #
0343751
Model MB735
48" Heavy Duty LED Light Bar with 2 Strobes
47.50"
1206.5mm
Light Source: LED
Input Voltage: 12V DC
Current Draw:
Model 281: 0.80 Amps @ 12V DC
Model 735: 7.00 Amps @ 12V DC
Model 7150: 12.00 Amps @ 12V DC
Model 601: 7.40 Amps @ 12V DC
Standards: Buy America Compliant
Mounting: 2 blind rivets on each side for M8 mounting bolt
Configuration: (x2) Model 735 Flood Worklights, (x2) Model
7150 Trap Worklights, (x2) Model 281 Signal Lights, and
(x2) Model 601 Strobe Light
2.00"
50.8mm
9.57"
243.1mm
8.43"
214.1mm
Voltage
Additional Information
Part #
12V DC
Light Bar with 2 Amber Strobes
0345381
12V DC
Light Bar with 1 Amber & 1 Red Strobe
0343761
155
Model 255
LED Vehicle Identification Sign
The Dependable Choice
J.W. Speaker’s Model 255 LED vehicle identification signs were specifically designed for applications that rely on
visibility as a key component of on-the-job safety. We understand that mining and other industrial applications can
be hard on vehicle identification signs. Shock, vibration, dirt, and sludge often take a heavy toll on traditional reflective
and high contrast signage. The Model 255 is built to overcome these challenges with a powder-coated steel frame,
epoxy lens, and high intensity LED light array. The heavy duty steel frame is easy to install and provides protection
against the harsh elements and impacts associated with industrial use. The LEDs are maintenance-free and, because
it’s sealed to IP67, cleaning is as simple as spraying the sign with water. The Model 255 has been designed for
continuous industrial use and carries a Lifetime Limited Warranty (read more about our warranty on page 158).
The Versatile Choice
Rather than being locked into buying a three-digit, four-digit, etc. vehicle identification sign, J.W. Speaker's Model
255 LED vehicle identification sign comes as a single digit. Multiple signs can be linked together, allowing you
to use as many digits as needed. The Model 255 is programmable, so it can be used and reused on any piece
of equipment—eliminating the need for custom-made identification signs. An intuitive programming switch (sold
separately) allows for quick, on-site changes to the display. The optional CANbus interface module allows the sign
to interface with inputs such as vehicle load sensors. The sign automatically dims or brightens based on ambient
lighting conditions for maximum visibility.
156
Model 255
0.70"
17.8mm
0.85"
21.6mm
LED Vehicle Identification Sign
8.00"
203.2mm
11.10"
281.9mm
6.00"
152.4mm
1.50"
38.1mm
13.30"
337.8mm
Light Source: LED
Input Voltage: 12-24V DC
Current Draw: 1.80 Max Amps @ 12V DC;
0.90 Max Amps @ 24V DC
Standards: ECE Reg. 10 (Radiated Emissions), Buy America
Compliant, Sealed to IP67
Mounting: Low profile mount
2.00"
50.8mm
2.00"
50.8mm
Function
Voltage
Lens
Size
LED Color
Part #
Alphanumeric Board
12-24V DC
Epoxy
8"
Amber
0345261
Alphanumeric Board
12-24V DC
Epoxy
8"
Blue
0345251
Alphanumeric Board
12-24V DC
Epoxy
8"
Green
0345241
Alphanumeric Board
12-24V DC
Epoxy
8"
Red
0345231
Alphanumeric Board
12-24V DC
Epoxy
11"
Amber
0345211
Alphanumeric Board
12-24V DC
Epoxy
11"
Blue
0344721
Alphanumeric Board
12-24V DC
Epoxy
11"
Green
0344711
Alphanumeric Board
12-24V DC
Epoxy
11"
Red
0344701
Numeric Board
12-24V DC
Epoxy
8"
Amber
0345301
Numeric Board
12-24V DC
Epoxy
8"
Blue
0345291
Numeric Board
12-24V DC
Epoxy
8"
Green
0345281
Numeric Board
12-24V DC
Epoxy
8"
Red
0345271
Numeric Board
12-24V DC
Epoxy
11"
Amber
0345221
Numeric Board
12-24V DC
Epoxy
11"
Blue
0344691
Numeric Board
12-24V DC
Epoxy
11"
Green
0344681
Numeric Board
12-24V DC
Epoxy
11"
Red
0344671
Input Power Harness
12-24V DC
3264601
Programming Switch
3156831
CANbus Interface Module
CALL
157
Service Parts
Description
1141-12V Incandescent Bulb (21 Candlepower)
1156-12V Incandescent Bulb (32 Candlepower)
12" Wire Assembly with DT06-2S Connector
12" Wire Assembly with DT06-2S/PE 12015792 Connector
1683-24V Incandescent Bulb (32 Candlepower)
35/35-12V Halogen Bulb
4340-48V PAR36 Sealed Beam (Trap)
4411-12V PAR36 Sealed Beam (Trap)
862-12V Halogen Bulb (37 Watt)
881-12V Halogen Bulb (27 Watt)
889-12V Halogen Bulb (27 Watt)
894-12V Halogen Bulb (37.5 Watt)
912-12.8V Incandescent Wedge-Style Bulb
HID Ballast Adapter Kit (12V)
HID Ballast Adapter Kit (24V)
Housing for PAR36 Lamps (Includes Hardware)
Anti-Flicker Harness for Model 8700 Evolution LED Headlights
L Bracket
Model 150 Side Marker Light Carrier
Model 250 Signal Light Replacement Amber Acrylic Lens
Model 270 Signal Light Replacement Amber Acrylic Lens
Model 270 Signal Light Replacement Red Acrylic Lens
Model 400 Strobe Light Replacement Amber Lens
Model 800 Work Light Replacement Wide Flood Clear Lens
Model 8475 Replacement 6' Vehicle Charging Cord (12V DC)
Model 8800 Optional Double Bucket Mounting Assembly - LH
Model 8800 Optional Double Bucket Mounting Assembly - RH
158
Part #
4805861
4802591
3258910
3262700
4830751
4831920
4908971
4903281
4831181
4830881
4831871
4830831
4831961
3152411
3152421
3154260
8000311
0703341
5856032
4428311
4401771
4420511
4429681
4429151
3267220
3156680
3156600
Service Parts
Description
Model TS3000R Amber Lens Cover
Model TS3000R Black Logo Lens Cover
Model TS3000R Blue Lens Cover
Model TS3000R Clear Lens Cover
Model TS3000V Amber Lens Cover
Model TS3000V Black Logo Lens Cover
Model TS3000V Blue Lens Cover
Model TS3000V Clear Lens Cover
Model TS3000V Inverted Black Logo Lens Cover
Models 250 & 251 Signal Light Replacement Red Acrylic Lens
Models 400 & 537 Strobe Light Flashtube
Models 52 & 60 Rapid Charger Kit
Models 9710 & 9720 Flood Lens/Reflector Kit
Models 9710 & 9720 HID Kit (Flood Lens/Reflector & Bulb)
Models 9710 & 9720 HID Kit (Spot Lens/Reflector & Bulb)
Models 9710 & 9720 HID Kit (Trap Lens/Reflector & Bulb)
Models 9710 & 9720 Spot Lens/Reflector Kit
Models 9710 & 9720 Trap Lens/Reflector Kit
PS24W-12V Bulb Assembly
Replacement HID Bulb
Replacement Mounting Kit - Black
Replacement Mounting Kit - Stainless Steel
Replacement Push-Pull Switch
SP12-24V Halogen Bulb (45 Candlepower)
SP7-36V Halogen Bulb (32 Candlepower)
SP8-48V Halogen Bulb (32 Candlepower)
Wire Assembly with Packard #12020818 Connector
Part #
5862921
5862931
5862911
5862901
5862501
5861391
5862511
5862361
5862351
4404481
3148681
6600651
3155021
3150831
3150821
3150811
3155031
3155041
4831891
4832171
8200121
8200101
0809231
4831091
4830931
4830941
3253360
159
Lighting Terminology
Thanks to advancements in lighting technology, we enjoy some of the brightest, longest-lasting, and most efficient lighting
options the world has ever seen. These technological advances have also led to an abundance of terminology. To help you
stay informed and educated, here are some basic terms for understanding lighting technology.
Quick Reference
Watt: a measure of the total power consumption of a light source
Lumen: a measure of the total visible light output of a light source
Candlepower: an obsolete term that has been replaced by “candela”
Candela: a measure of the intensity of a light source in a particular direction
Foot-candles & Lux: the amount of visible light falling on a surface
Watts & Lumens
It is a common misperception that higher wattage equals higher light output—in part due to the fact that incandescent
light output generally increases with wattage numbers. With LED technology, this is not the case. LEDs can emit the
same, if not more light than a bulb, while consuming less power.
Watts are a measure of power consumption, while lumens are a measurement of visible light output. When you want
to know how bright a light will be, you need to identify the lumen output value, not the wattage—especially when
comparing LED and bulb-based lights.
Candlepower & Candela
Though it was once the predominant unit of measure used to describe
the intensity of a light source in a particular direction, the term
“candlepower” is now obsolete. The current standard unit of measure
is the “candela.”
One candela is close to the light intensity produced by an ordinary
candle as perceived by the human eye, and addresses how bright a
light source is in a particular direction. Candela are similar to lumens
in that both deal with light output as perceived by the human eye.
The key difference between the two is that candela is specifically a
measurement of directional intensity.
Foot-Candles & Lux
Both foot-candles and lux measure the same thing—the amount of visible light that falls on a surface. The difference
is that the foot-candle uses the Imperial standard measuring system (feet, pounds, etc.), while the lux uses the metric
system (meters, grams, etc.). A single foot-candle is equivalent to the amount of light that falls on a surface that is one
foot away from a single candle, and a lux is the amount of light that falls on a surface one meter away from a candle. For
conversion, one foot-candle is approximately equal to 10.764 lux.
160
Raw vs. Effective Lumens
The lumen is a unit of measure used to describe the total visible light output emitted by a light source. Because many
people base purchasing decisions solely on visual output, many LED lighting manufacturers boast high lumen numbers on
product literature and packaging. What they may fail to clarify, however, is whether these big numbers are the Raw Lumen
output or the Effective Lumen output.
Raw Lumens
Raw Lumens are theoretical, rather than the actual measure of useful light output. Manufacturers calculate Raw Lumen
output by multiplying the number of LEDs in a light by their maximum output rating. For example, if a light uses 10 LEDs
that have a maximum output rating of 100 lumens each, the Raw Lumen output would be 1,000 lumens (10 x 100 =
1,000). No photometric testing is necessary to come up with this number. The reason this is an unreliable metric is because
it does not take into account real world factors that can decrease light output by as much as 75 percent:
Thermal Losses: LEDs heat up over time. As they heat
up, their light output decreases.
Optical Losses: As light passes through any material
(ex: a lens), it loses some of its intensity.
Assembly Variation: Manufacturing processes cannot
guarantee that all lamps will be exactly the same.
For more information, visit the Reference section of our website at www.jwspeaker.com
Effective Lumens
Effective Lumens are an actual measurement that take into account all of these real world losses. Measuring the
Effective Lumen output of a light requires the use of high-tech photometry equipment. Because of the cost and expertise
involved, some manufacturers opt to cut corners and simply use the theoretical Raw Lumen value. This makes an applesto-apples comparison between lights very difficult, because customers purchasing based on a Raw Lumen value are very
likely to get lower output than advertised.
Here’s a practical example:
• LED light No. 1 has an output rating of 2,000 Raw Lumens, but only 1,000 Effective Lumens.
• LED light No. 2 has an output rating of 3,000 Raw Lumens, but only 500 Effective Lumens.
Based solely on Raw Lumens, No. 2 would be the clear choice. However, turn both lights on, and light No. 1 would be
twice as bright as light No. 2 because it has the higher Effective Lumen output.
To get the entire picture, J.W. Speaker encourages you to challenge manufacturers and lighting sales reps to provide both
the raw and the effective output numbers.
161
EMI (Electromagnetic Interference)
Electromagnetic Interference (EMI) refers to a disturbance that affects an electrical circuit. Lights can both cause and
be the victim of EMI issues in your vehicle. For this reason, it is important to have a basic understanding of EMI and to
look for lights that have been adequately designed and tested to reduce its effects.
Five Types of EMI
• Radiated Emissions: Electromagnetic noise emitted by a light through the air that can interfere with other electronics
(ex. cell phone, radio, etc.).
• Conducted Emissions: Electromagnetic noise conducted down a power line in a vehicle which can interfere with
other electronic components in the vehicle.
• Radiated Immunity: The tolerance of a light to inbound electromagnetic noise in the atmosphere. Any broadcast
signal (cell phone, radio tower, etc.) can interfere with a light if it is not properly designed.
• Conducted Immunity: The tolerance of a light to inbound electromagnetic noise conducted on vehicle power lines.
• Electrostatic Discharge (ESD): A sudden flow of electricity between two objects, such as when you shuffle your feet
on carpeting and then touch someone to give them a shock.
Component Level vs. Vehicle Level
For OEM applications, lighting manufacturers focus on testing their products at a component (light) level. This is done to
make sure that the lights will not cause a vehicle-level EMI failure or interfere with other electronics in the vehicle. OEMs
then test at a vehicle level to ensure that it meets regulatory requirements.
Standard vs. Custom Products
At J.W. Speaker, we design and manufacture both standard and custom products. For our standard products, we’ve
established a set of high standards by which we design and test for electromagnetic compliance. For custom products,
we design, test, and manufacture to meet your exact specifications. In the event that you do not have EMI specifications,
we’ll provide you with a list of EMI standards to review and approve before we start on the design.
Testing Capabilities
J.W. Speaker has EMI testing equipment on-site at our production facility which enables us to do all of the following:
SAE J1445
• Load Dump (Pulse 5) (J1113/11)
• Inductive Switching (Pulse 1/2) (J1113/11)
• Burst Transients (Pulse 3a/3b) (J1114/11)
• Starter Motor Engagement (Pulse 4) (J1113/11)
• Electrical Fast Transients (J1113/12)
• Chattering Relay (J1113/12)
• 4.13.3.4.1 Radiated Emissions (J1113-41)
• 4.13.3.4.4 Conducted Emissions, DC Power Leads
(J1113-41)
ESD
• SAE J1113-13 (SAE J1455)
• ISO 10605
• IEC 61000-4-2 (EN 12895)
162
EN 12895 Industrial Trucks Electromagnetic Capability
• EN 55022 With Exception of the Antenna Height
• CISPR 12
• CISPR 22
• CISPR 25
• Mil STD – 461F (Army Mobile Emissions ONLY)
SAE J2139
• Load Dump
• Inductive Switching
• Mutual
ECE Reg 10
• Broadband Electromagnetic Emissions
• Narrowband Electromagnetic Emissions
• Immunity: ISO11452-4
• ISO 7637-2 Pulses 1, 2a, 3a, 3b, 4
• ISO 7637-2 Emission of Conducted Disturbances
Ingress Protection Ratings
The IP Code outlines a system of classification for the protection of electrical enclosures against the intrusion of foreign
bodies (ex. tools, fingers, dust, moisture, etc.). The system of classification was specified by the International Electrotechnical
Commission and is officially designated as IEC 60529. The rating is specified by the letters IP followed by two digits
(ex. IP25, IP68, etc.).
First Number – Degree of Ingress Protection
The first number of the IP code indicates the degree of protection against contact with moving parts and the degree that
the equipment is protected against solid foreign bodies intruding into an enclosure.
0123456-
No protection provided
Protection against entry of objects larger than 50 square mm
Protection against entry of objects larger than 12 square mm
Protection against entry of objects larger than 2.5 square mm
Protection against entry of objects larger than 1.0 square mm
Protection against entry of dust in sufficient quantity to prevent satisfactory operation
Complete Protection against entry of dust
Second Number – Degree of Moisture Protection
The second number indicates the degree of protection for the equipment inside the enclosure against the harmful entry of
various forms of moisture (ex. dripping, spraying, submersion, etc.).
0 - No protection provided
1 - Protection against drops of water falling vertically
2 - Protection against drops of water falling vertically when the luminaire is tilted up to
15 degrees from its normal position
3 - Protection from entry of water spray from angle of up to 60 degrees from vertical
4 - Protection from entry of water splashes or sprays from any direction
5 - Protection from a low-pressure jet of water in any direction
6 - Protection against heavy seas or a strong jet of water in any direction
7 - Protection against immersion up to 1 meter
8 - Protection against submersion over 1 meter
IP69K: A Higher Standard
German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP69K rating for highpressure, high-temperature wash-down applications. Such enclosures must not only be dust tight (IP6_), but also able to
withstand high-pressure and steam cleaning. The test specifies a spray nozzle that is fed with 80°C water at 8–10MPa
(80–100bar) and a flow rate of 14–16L/min. The nozzle is held 10–15 cm from the tested device at angles of 0°, 30°, 60°
and 90° for 30 seconds each. The test device sits on a turntable that rotates once every 12 seconds (5rpm).
163
Regulatory Standards
J.W. Speaker designs and tests our products to meet various regulatory standards from around the globe. This includes,
but is not limited to, the following:
ADR
The Australian Design Rules are national standards for vehicle safety, anti-theft, and emissions.
ASABE Standards
American Society of Agricultural and Biological Engineers regulates certain products used on
agricultural equipment.
CE Recognized
The CE marking certifies that a product has met EU consumer safety, health, and environmental requirements.
FMVSS 108 (DOT)
Within the United States, the Federal Motor Vehicle Safety Standard (FMVSS) 108 regulates all automotive
lighting, signaling, and reflective devices. The United States Department of Transportation (DOT) enforces
these standards.
ECE Standards
Many countries recognize the United Nations Economic Commission for Europe (ECE) Transport Division’s
regulations. Countries often mirror the content of these ECE regulations in their own national requirements
or permit the use and importation of ECE-approved vehicles.
SAE Standards
SAE International is a standards development organization for the engineering of powered vehicles. This
includes cars, trucks, boats, aircrafts, and more. The SAE standards are mainly used in the U.S. and
Canada and do not recognize ECE approvals.
Transport Canada
Transport Canada is responsible for developing regulations, policies, and services relating to transportation
in Canada.
UL Recognized
Underwriters Laboratories (UL) is an independent product safety certification organization. UL develops
standards and test procedures chiefly dealing with product safety. UL is one of several companies
approved for such testing by the U.S. federal agency OSHA. OSHA maintains a list of approved testing
laboratories, known as Nationally Recognized Testing Laboratories.
164
Headlight Condensation
When people see condensation on the inside of their headlight, they may initially think that the product is defective. The
truth is that all headlights experience some degree of condensation because moisture exists inside the headlight—in the
air that’s sealed inside, in the plastic components, etc.
Condensation
When the air inside the headlight warms up, moisture will collect on the coolest surface (typically the inside of the outer
lens) and manifest itself as small droplets of water or fog. Typically this moisture will evaporate and disappear within 3060 minutes. Because this is a natural process that can impact all lights, condensation is not considered a manufacturing
defect, and is not covered by our Lifetime Limited Warranty.
Water Ingress
Water ingress, on the other hand, is a completely different issue. Water ingress describes water making its way into the
headlight from outside, and typically indicates the presence of a sealing defect. You can identify water ingress by looking
for large droplets of water or pooling of water inside the headlight that doesn’t go away over time.
If a headlight suffers from water ingress as the result of physical abuse and/or misuse, it would not constitute a
manufacturing defect. Please note that proper use requires that factory-issued connectors are installed and correctly
positioned. If you experience water ingress as the result of proper use, please contact the J.W. Speaker authorized dealer
where you purchased the product.
Condensation Example
Water Ingress Example
• Small amounts of moisture/fog
• Evaporates in 30-60 minutes
• Large droplets or pools of water
• Doesn't evaporate, indicative of a leak
165
Warranty Statements
AFTERMARKET BULB-BASED PRODUCT WARRANTY
All J.W. Speaker’s bulb-based aftermarket products (those with HID, halogen or incandescent light sources) come with
a Limited Warranty against defects in materials, components and workmanship for one year from the original date of
purchase. This One Year Limited Warranty does not cover bulbs or sealed beams, nor does it cover claims resulting from:
• Abuse, neglect and/or accidents
• Modifications and/or alterations
• Improper installation and/or use
• Chemicals and/or cleaners
• Voltage transients and/or spikes
In the unlikely event that you experience a problem that falls within the terms of this One Year Limited Warranty, J.W.
Speaker will, at its discretion, either replace or refund the purchase price of the product.
This aftermarket product warranty is exclusive. J.W. Speaker has no other liability or obligation related to products. No
other warranties are made, either express or implied, including without limitation, any implied warranties of title, noninfringement, merchantability or fitness for a particular purpose.
AFTERMARKET LED PRODUCT WARRANTY
All J.W. Speaker aftermarket LED products come with a Lifetime Limited Warranty against defects in materials, components
and workmanship. This Lifetime Limited Warranty is not transferrable and applies to the original installation of the J.W.
Speaker LED light as long as the original consumer/purchaser owns the vehicle (lifetime). Please note that this warranty
does not cover claims resulting from:
• Abuse, neglect and/or accidents
• Modifications and/or alterations
• Improper installation and/or use
• Chemicals and/or cleaners
• Voltage transients and/or spikes
In the unlikely event that you experience a problem that falls within the terms of this Lifetime Limited Warranty, J.W.
Speaker will, at its discretion, either replace or refund the purchase price of the product. To make a warranty claim, simply
return the product (along with all of the factory-issued components) to the J.W. Speaker authorized dealer where the
product was originally purchased and complete a warranty claim form.
This aftermarket product warranty is exclusive. J.W. Speaker has no other liability or obligation related to products. No
other warranties are made, either express or implied, including without limitation, any implied warranties of title, noninfringement, merchantability or fitness for a particular purpose.
166
Warranty Claim Process
Customers:
In the unlikely event that you experience a problem with a J.W. Speaker product, please follow these steps:
1. Return the product, along with all of the factory-issued components (ex. connectors,
hardware, etc.) that came in the box to the J.W. Speaker authorized dealer where the
product was originally purchased.
2. Complete a J.W. Speaker Warranty Claim Form.
Dealers:
In the unlikely event that a customer experiences a problem with a J.W. Speaker product, please follow these steps:
1. Have the customer return the product to you, along with all of the factory-issued
components (ex. connectors, hardware, etc.) that came in the box.
2. Gain an understanding of the problem your customer is experiencing with the product
and examine the product for yourself.
3. Confirm that the problem falls within the terms of the product warranty (found on the
previous page).
4. If the problem falls within the terms of the product’s warranty, please contact your J.W.
Speaker Customer Service Representative, who will provide you with an RMA # and a
copy of the J.W. Speaker Warranty Claim Form.
5. Complete the J.W. Speaker Warranty Claim Form, enclose it with the product, and ship
them back to J.W. Speaker.
Our Quality Assurance (Q.A.) Team will conduct a thorough investigation of the problem. Your J.W. Speaker Customer
Service Representative will subsequently contact you with the Q.A. Team’s findings and discuss next steps (ex. returning
the product, issuing a credit, etc.). If, at any point, you have questions about our warranty policies, the claim process, or
the status of a claim, please do not hesitate to contact your J.W. Speaker Customer Service Representative.
167
Model Number Index
Model #
Model 60
Model 70
Model 90
Model 125
Model 146
Model 150 Dome Light
Model 150 Signal Light
Model 151
Model 157
Model 170
Model 186
Model 206
Model 212
Model 217
Model 223
Model 224
Model 232
Model 236
Model 245
Model 255
Model 260
Model 261
Model 262
Model 263
Model 265
Model 265 Mounting Bracket Assemblies
Model 267
Model 270
Model 272
168
Page #
44
46
14-15
116
92
106
117
118
119
120
107
121
122
123
124
125
126
127
128
156
129
130
131
132
133
134
135
136
137
Model #
Model 280
Model 281
Model 282
Model 283
Model 284
Models 400 & 401
Model 404
Model 405
Model 408
Models 410 & 411
Model 412 Dome Light
Model 412 Signal Light
Model 417
Model 419
Model 450
Model 515
Model 523
Model 523 Portable
Model 523 Tripod
Model 523 XL
Model 524
Model 526 XL
Model 527 RED
Models 538 & 539
Model 541
Model 601
Model 601 XL
Model 623
Page #
138
139
108
140
93
94
95
96
109
110
111
141
112
113
142
16
48
47
50
49
51
52
97
98
99
100
101
54
Model Number Index
Model #
Model 631
Model 660
Model 670 XD
Model 680 XD
Model 735
Model 735 XL
Model 736
Model 770 XD
Models 770 BLU & 770 RED
Model 771 XD
Model 775 XD
Model 776 XD
Model 778 XD
Model 781
Model 783
Model 803
Model 806
Model 832
Model 832 XL
Page #
150
56
57
58
59
60
61
62
102
63
64, 143
65
66
67
68
69
70
17, 71
72
Model 840 XD
Model 840 XD Vertical Flood
Model 880 XD
Model 881 XD
Model 4410
Model 4410 XL
Model 6020
Model 6040
Model 6042
Model 6045
73
74
76
77
78
79
80
81
144
18
Model #
Page #
Model 6048
19
Model 6130
20
Model 6145
22
Model 6150
24
Model 6170
151
Model 6310
152
Model 6400
153
Model 7150
82
Model 7150 XL
83
Model 7151
84
Model 8415
25
Model 8475
86
Model 8630
26
Model 8630 Optional Mounting Assemblies
31
Model 8655
27
Model 8700 Evolution
28
Model 8700 High Beam Only
30
Model 8700 Optional Mounting Assemblies
31
Model 8700 Anti-Flicker Harness
28
Model 8770
32
Model 8800
33
Model 8800 High/Low
34
Model 8900
35
Model 9049 Light Bars
36
Models 9710 & 9720
88
Model 9790
147
Model MB735
154
Model TS3000R
38
Model TS3000V
39
169
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement