Behavioral Healthcare Door Safety Life More Secure. www.thedoorswitch.com 11772 Westline Industrial Dr. St. Louis, MO 63146 local toll free fax (314) 298-3433 (877) 998-5625 (314) 373-7227 The Door SwitchTM is an over-the-door alarm for your behavioral healthcare facility doors. PRODUCT BOOK The Door SwitchTM is a patented design. Patent No. RE42,991 and RE44,039 For more information, please visit www.thedoorswitch.com or call toll free at (877) 998-5625 Table of Contents TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 TERMS & CONDITIONS OF SALE / WARRANTY . . . . . . . . . . . . . . . . . 2-3 PRODUCT LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DOOR SWITCH SYSTEM OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 COMPONENT FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-15 CRITERIA SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 INSTALLATION LIABILITY RELEASE FORM . . . . . . . . . . . . . . . . . . . . . . .18 TYPICAL DOOR SWITCH SYSTEM LAYOUT. . . . . . . . . . . . . . . . . . . . . . .19 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 1 Terms & Conditions of Sale/Warranty ACKNOWLEDGEMENT OF ORDER AND TERMS AND CONDITIONS OF SALE This is to acknowledge receipt of your (“Buyer”) purchase order for the specified THE DOOR SWITCH ™ (“Seller”) products (the “Products”) and to set forth the terms and conditions (“Terms and Conditions”) of sale for this order. If the Terms and Conditions of this acknowledgment differ in any way from the terms and conditions of Buyer’s order, this acknowledgment shall be construed as a counteroffer and shall not be effective as an acceptance of such order unless Buyer assents to the Terms and Conditions contained herein, which shall constitute the entire agreement (the “Agreement”) between the parties. Buyer’s assent to the Terms and Conditions contained herein shall be deemed given upon Buyer’s execution of this acknowledgment below or upon Buyer’s failure to object to these Terms and Conditions in writing within ten (10) days from the date of receipt of this acknowledgment. Buyer’s receipt of delivery of the Products without immediate return will further manifest Buyer’s assent to these Terms and Conditions. No additions to or modifications of any of the Terms and Conditions hereof shall be effective unless made in writing and signed by both parties. 1. TAXES: Any tax or governmental charge (or increase in same) affecting Seller’s costs of production, sale, or delivery shall be for Buyer’s 2. MINIMUM ORDER CHARGE: The minimum invoice amount will be $50.00. An order with a net value of less than $50.00 will be 3. TERMS OF PAYMENT: Terms are net thirty (30) days from the date of Seller’s invoice in U.S. currency. Seller shall have the right, among 4. BACK CHARGES: Seller is not responsible for, and will not accept, any charges for labor or material costs incurred for any installation, 5. SHIPMENT AND DELIVERY: Deliveries are made F.O.B. Seller’s shipping point. Responsibility and risk of loss for damage shall pass 6. RETURN OF GOODS: Products cannot be returned without the prior written consent of Seller. A 25% restocking and handling charge 7. LIMITED WARRANTY; LIMITATION OF REMEDY AND LIABILITY: Subject to the limitations on remedies and liabilities set forth account and shall be added to the price and shall not be subject to any discount. invoiced at $50.00. other remedies, either to terminate this Agreement or to suspend further performance under this and/or other agreements with Buyer in the event Buyer fails to make any payment when due. Buyer shall be liable for all costs and expenses, including reasonable attorney’s fees, relating to the collection of past due amounts. If any payment owed to Seller is not paid when due, it shall bear interest at the maximum rate allowed by law from the date on which it is due until it is paid. Should Buyer’s financial situation and/or capabilities become unsatisfactory to Seller in its sole discretion, cash payments or security satisfactory to Seller may be required by Seller for future deliveries and for the Products theretofore delivered. repair, service or replacement of the Products without the prior written consent of Seller. from Seller to Buyer upon render to, and receipt by, a common carrier at Seller’s shipping point. Buyer hereby expressly waives any claims for shortages or damages suffered in transit against Seller and hereby agree that any such claims shall be submitted by Buyer directly and only to the Buyer’s insurance carrier. While Seller will use commercially reasonable efforts to maintain the delivery date(s) acknowledged or quoted by Seller, all shipping dates are approximate and not guaranteed. Seller reserves the right to make partial shipments. Seller, at its sole option, shall not be bound to tender delivery of any Products for which Buyer has not provided shipping instructions. If the shipment of the Products is postponed or delayed by Buyer for any reason, Buyer agrees to reimburse Seller for any and all storage costs and other additional expenses resulting there from. will be applied to returned Products, other than those which are returned for warranty repair or replacement. Additional service charges will apply to any damaged Products for restoration to saleable condition. below, Seller warrants that the Products manufactured by Seller will be free from defects in material or workmanship under normal use and regular service and maintenance for one (1) year from the date of sale by Seller to Buyer. Determination of the suitability or fitness of the Products from the use or purpose contemplated by Buyer is the sole responsibility of Buyer, and Seller shall have no responsibility in connection with such suitability. The warranty set forth in this paragraph is Seller’s sole warranty with respect to the Products. SELLER MAKES NO OTHER WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY AGAINST INFRINGEMENT OF ANY THIRD PARTY’S INTELLECTUAL PROPERTY RIGHTS; AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS AGREEMENT. Buyer agrees to examine and inspect the Products immediately upon arrival at their destination, and if the Products allegedly fail to comply with the limited warranty provided hereunder, Buyer shall give detailed written notice of such alleged failure/non-compliance to Seller within ten (10) days of its receipt of the Products. Any claim under this warranty shall conclusively be deemed waived by Buyer unless written notice thereof is given to Seller within ten (10) days after Buyer discovers, or should reasonably have discovered, the alleged failure/non-compliance of the Products, whichever is earlier. Buyer’s exclusive remedy under this warranty is limited to the repair or replacement of the Products or the refund of the amount of the purchase price paid by Buyer, at Seller’s sole option, upon the return of any nonconforming Products to Seller at Buyer’s expense. This limited warranty does not extend to any losses or damages due to misuse, accident, abuse, neglect, normal wear and tear, Buyer’s negligence or intentional conduct, unauthorized modification or alteration, use beyond rated capacity, or improper installation, maintenance or application . To the extent that Seller has relied upon any specifications, information, representations of operating 2 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 Terms & Conditions of Sale/Warranty conditions or other data supplied by Buyer or its agents to Seller in connection with the design or manufacture of the Products, and in the event such specifications, information, representations or other data caused and/or contributed to the alleged failure/noncompliance of the Products, then any warranties contained herein shall be expressly waived by Buyer and be deemed null and void. IT IS UNDERSTOOD AND AGREED THAT SELLER’S LIABILITY HEREUNDER OR IN CONNECTION WITH THE MANUFACTURE OR SALE OF THE PRODUCTS DESCRIBED HEREIN, WHETHER IN CONTRACT, IN TORT, FOR INFRINGEMENT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE AMOUNT OF THE PURCHASE PRICE PAID BY BUYER. UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY LOSS OF ANTICIPATED PROFITS INCURRED BY BUYER). THE PRICE STATED FOR THE PRODUCTS IS A CONSIDERATION IN LIMITING SELLER’S LIABILITY. 8. EXCUSE OF PERFORMANCE (FORCE MAJEURE): Seller shall not be liable for delays in performance or for non-performance due to acts of God; acts of Buyer; war; fire; terrorism or other criminal conduct; flood; weather; sabotage; strikes, or labor or civil disturbances; governmental requests, restrictions, laws, regulations, orders or actions; unavailability of or delays in materials, utilities or transportation; default of suppliers; or circumstances or any other events or causes beyond Seller’s control. Deliveries or other performance may be suspended for an appropriate period of time or canceled by Seller upon notice to Buyer in the event of any of the foregoing, but the remainder of the Agreement shall otherwise remain unaffected as a result of the foregoing. If Seller determines that its ability to supply the total demand for the Products, or to obtain material used directly or indirectly in the manufacture of the Products, is hindered, limited or made impracticable, Seller may allocate its available supply of the Products or such material (without obligation to acquire other supplies of any such Products or material) among its purchasers on such basis as Seller determines to be equitable without liability for any failure of performance which may result there from. 9. CANCELLATION: Buyer may cancel orders only upon reasonable advance written notice and consent of Seller. If Seller consents to such cancellation, Buyer must pay Seller its cancellation charges which include, among other things, all costs and expenses incurred to cover commitments made by Seller, and a reasonable profit thereon. Seller’s determination of such termination charges shall be conclusive. 10. CHANGES: Buyer may request changes or additions to the Products consistent with Seller’s specifications and criteria. In the event such changes or additions are accepted by Seller, Seller may revise the price(s) and date(s) of delivery. Seller reserves the right to change designs and specifications for the Products without prior notice to Buyer, except with respect to Products being made-to-order for Buyer. 11. ASSIGNMENT: Buyer shall not assign its rights or delegate its duties hereunder or any interest therein or any rights hereunder without the prior written consent of Seller, and any such assignment, without such consent, shall be void. 12. INSTALLATION: Buyer shall be responsible for receiving, inspecting, testing, storing, installing, starting up, and maintaining all Products. 13. GENERAL PROVISIONS: These Terms and Conditions supersede all other communications, negotiations and prior oral or written statements regarding the subject matter of these Terms and Conditions. No change, modification, rescission, discharge, abandonment, or waiver of these Terms and Conditions shall be binding upon Seller unless made in writing and signed on its behalf by a duly authorized representative of Seller. No conditions, usage of trade, course of dealing or performance, understanding or agreement purporting to modify, vary, explain, reject, or supplement these Terms and Conditions shall be binding unless hereafter made in writing and signed by the party to be bound, and no modification shall be affected by Seller’s receipt, acknowledgment, or acceptance of purchase orders, shipping instruction forms, or other documentation containing terms at variance with or in addition to those set forth herein. No waiver by either party with respect to any breach or default or of any right or remedy and no course of dealing, shall be deemed to constitute a continuing waiver of any other breach or default or of any other right or remedy, unless such waiver be expressed in writing and signed by the party to be bound. All typographical or clerical errors made by Seller in any quotation, acknowledgment or publication are subject to correction. In the event that any work, phrase, clause, sentence, or other provision hereof shall be deemed unenforceable by a court of law and/or equity, such finding shall not invalidate all other enforceable provisions hereof. The validity, performance, and all other matters relating to the interpretation and effect of this Agreement shall be governed by the laws of the state of Missouri, without giving effect to its conflict of laws rules. The application of the United Nations Convention on Contracts for the International Sale of Goods and the United Nations Convention on the Limitation Period in the International Sale of Goods to this Agreement is expressly excluded. Buyer and Seller agree that the proper and only venue for all actions arising from, relating to or in connection with this sale shall be the County of St. Louis, State of Missouri, where Seller’s place of business is situated, and the parties agree to submit to such jurisdiction. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 3 Product List DOOR SWITCH / HEADER ASSEMBLY Door Switch Header Assembly 36” RH/LH Door Switch Header Assembly 42” RH/LH Door Switch Header Assembly 48” RH/LH Door Switch Assembly Custom Made CONTINUOUS HINGE / ELECTRIC HINGE Continuous Hinge up to 83” Continuous Hinge up to 96” Electric Hinge Assembly DS RH Electric Hinge Assembly DS LH PANEL / KEYPAD / COMPONENTS / OPTIONS Keyswitch Control Panel Keypad Switch Interface Module Strobe Relay Module Supervised Notification Module Polling Loop Extender Panel Linking Module USB / Serial Interface Module Short Circuit Isolator Keyswitch Isolation Module Audible Alarm Strobe Light Stopper Dome Auxiliary Power Supply Sealed Lead-Acid Battery Electrified Top Pivot Assembly 4 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 The Door SwitchTM System Overview PRODUCT FEATURES The Door SwitchTM is a complete hardware package that includes the following features: • Designed for new construction or as a retrofit solution for inpatient behavioral healthcare facility doors. • System keeps an electronic date and time log of the last 512 events (time of alarm, response time, reset time). • All system components are electronically supervised 24/7 and will notify if maintenance is required. Monitored doors can be isolated from the system during maintenance. • Electrified hinge section factory-made to fit with the switch, no cutting in the field. • Separate from the continuous hinge to provide easy access for maintenance, without the need to take down the door. • Exposed hardware installed with tamper-resistant screws. • Switch activation at one pound (1lb.) applied pressure. • Isolated keyswitch located by monitored room and assures patient safety. • Control panel controls all functions of The Door SwitchTM system. • Deluxe keypad used to monitor the status and reset The Door SwitchTM system. • Strobe light placed above room door gives quick visual location. • Audible alarm used to notify personnel of a patient room alarm condition. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 5 Door Switch / Header Assembly PRODUCT FEATURES • Header assembly fastened on the face of the frame to create an activation point between the switch and the frame. • Header corner piece on hinge side provides coverage for vulnerable corner and hinge area. • Switch assembly installed at the top face of the door for detection of a ligature apparatus. • Installed with tamper-resistant screws. • Creates an immediate activation point with the switch assembly when the door is closed on a ligature apparatus. • Tapered edges reduce catch points. • Switch activation with one pound (1lb) of applied pressure. • Made of non-ferrous material. • Custom made to fit all door sizes. 6 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 Continuous Hinge & Electric Hinge PRODUCT FEATURES • • • • Use of a full surface continuous hinge to reduce catch points. Electrified 5” hinge section serves as power transfer for The Door SwitchTM. Factory-made to fit with The Door SwitchTM. Removable hinge cover provides easy servicing to the wires without the need to remove the door. • Made of non-ferrous material. Note: For double acting door applications, please see electrified top pivot assembly. Keyswitch PRODUCT FEATURES • Keyswitch resets the alarm and mounted next to the room door to assure patient safety. • Keyswitch (without cylinder) accepts most current key systems. • Available in wall mount or frame mount. REQUIRED • Single gang box. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 7 Control Panel PRODUCT FEATURES • • • • • • • • • • Controls all functions of The Door SwitchTM system. Monitors up to 96 doorways (additional components required). Up to 8 control panels can be linked together to monitor up to 768 doorways. Keypad or computer programmable. Internal history log can store up to 512 events (time of alarm, response time and reset time). 24/7 system component check. One independent alarm circuit. 12VDC, 750mA auxiliary output for powering The Door SwitchTM components. Two 12V batteries are supplied for backup power. Built-in polling loop for The Door SwitchTM with a maximum current draw of 128mA. Keypad PRODUCT FEATURES • • • • • • • • • 8 Used as a remote panel to monitor the status of The Door SwitchTM system. Can be used as remote means of programming the system. Provides visual display of alarmed events. Attractive white console with a contoured door. 12VDC, 160mA (activated transmission) required (not from the polling loop). Large, easy-to-use keypad, soft-touch keys. Keys continuously backlit for greater visibility. Minimum of one required per system. Occupies one bus address on the Control Panel. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 Switch Interface Module PRODUCT FEATURES • Used with the strobe relay module to create 2 independently monitored doors within a patient room. • One per patient room. • 2mA required from the polling loop. • Electronics mounted in a small plastic case with a tamper-protected cover. Strobe Relay Module PRODUCT FEATURES • Used to link the strobe and the first door switch to the polling loop. • One per patient room (1 strobe per patient room). • 7mA required from the polling loop. • Electronics mounted in a small plastic case with tamper-protected cover. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 9 Supervised Notification Module PRODUCT FEATURES • Used to add two (2) independent alarm circuits. • A maximum of 15 modules (30 independent alarm circuits) allowed per panel. • Occupies one bus address on the control panel. • 12VDC, 185mA (activated) required (not from the polling loop). • Electronics mounted in a small plastic case. Polling Loop Extender PRODUCT FEATURES • Module required to expand The Door SwitchTM beyond 12-16 patient rooms. • Used to add 128mA to the polling loop. To be used: • After every 12 patient rooms with 2 independently monitored doors per room and 1 strobe. • After every 16 patient rooms with 1 independently monitored door per room and 1 strobe. • May be used to group/isolate polling loop addresses (patient rooms) for ease of troubleshooting and maintenance. • 12VDC, 400mA required (not from polling loop). • Electronics mounted in a small plastic case. 10 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 Panel Linking Module PRODUCT FEATURES • Used to link multiple control panels together. • A maximum of 8 panels can be linked together, 384-768 rooms. • Occupies one bus address on the control panel. • 12VDC, 90mA required (not from polling loop). • Electronics mounted in a small plastic case. USB / Serial Interface Module PRODUCT FEATURES • Used by the installer to perform initial system programming or future system upgrades. • Links the control panel to a laptop computer USB port for direct two-way software communication. Used to download a control panel's history log. • • 12VDC, 25mA required (not from the polling loop). PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 11 Short Circuit Isolator PRODUCT FEATURES • Used to provide short circuit isolation between extended polling loops for The Door SwitchTM components. • When a short occurs on a polling loop branch, an LED is illuminated and isolates the defective branch of the system. • Reduces troubleshooting time and maintenance costs. • One Isolator is suggested for each wire run. • 5mA (activated) required from the polling loop. • Electronics mounted in a small plastic case. Keyswitch Isolation Module PRODUCT FEATURES • Isolates individual rooms when responding to an alarmed event. • Keyswitch disables horn at monitored room and assures patient safety. REQUIRED • Non-metallic single gang shallow box (3-5/8"H x 2-3/8"W x 1-1/4"D). 12 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 Audible Alarm PRODUCT FEATURES • Used to notify personnel of a patient room alarm condition within a specific area of the facility. • 12VDC, 100mA (activated) required (not from the polling loop). • Single warble tone. • 105 dB at 12VDC. • White designer look. Strobe Light PRODUCT FEATURES • • • • Used to notify personnel of a specific patient room alarm condition. Flash rate of approximately 110 flashes per minute. Strobe light comes with 4 colored lenses (blue, green, amber and clear). Ligature-resistant design. REQUIRED • 4 1/2 x 4 1/2 shallow double gang box with mounting screws on the inside of the box. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 13 Stopper Dome PRODUCT FEATURES • Polycarbonate protective cover is used to provide vandal protection for the audible alarm and the strobe. Auxiliary Power Supply PRODUCT FEATURES • Used when additional power is required for powering The Door SwitchTM components not on the polling loop (consult factory). • Panel Linking Modules • Serial Interface Modules • Supervised Notification Modules • Polling Loop Extenders • Keypads • Audible Alarms • Strobe Lights • UL Listed, Class 2 Rated Power Supply/Charger. • 12VDC, 1.75A output. • One 12V battery supplied for backup power. 14 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 Sealed Lead- Acid Battery PRODUCT FEATURES • Used for backup power to the control panels and auxiliary power supplies. • 12VDC, 7AH. Electrified Top Pivot Assembly PRODUCT FEATURES • Replaces a mechanical version of the same make and model and will serve as the electrical connection between the switch assembly and the system electronics. • To be used for double acting door applications. • Consult factory for makes and models available. Note: For continuous hinge applications, please see continuous hinge and electric hinge. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 15 Criteria Sheet Double Acting Doors - Pivots FIELD ESTIMATE SHEET: CUSTOMER: ________________________________ JOB SITE: _________________________ ADDRESS: ________________________________ ADDRESS: CITY: ________________________________ CITY: STATE: ________________________________ STATE: _________________________ _________________________ _________________________ WORK ORDERED BY __________________________ __________________________ PHONE PHONE CONTACT _________________________ _________________________ Note: Photograph must accompany any nonstandard 2” hollow metal frame. Variations due to molding, wall conditions and circumstances may interfere with The Door SwitchTM. Door Number & Hallway Example Door __1__ Hall __A__ Inner Frame Width Frame Face Width Door Width Inner Frame Height Pivot Point Pivot Door Inset Pivot Make and Model Number Door Handing 44" 2" 43-3/4" 84" 1-3/4" 1/8" Ives 7255 RH Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ The safety of this product depends on the EXACT MEASUREMENTS of EACH Door. Measurements are to be taken from the high/pull side of the door. * See MEASURING DOORS. 16 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 CRITERIA SHEET __ _ Criteria Sheet Continuous Hinge FIELD ESTIMATE SHEET: ADDRESS: ________________________________ JOB SITE: ________________________________ ADDRESS: CITY: ________________________________ CITY: CUSTOMER: STATE: ________________________________ STATE: WORK ORDERED BY __________________________ PHONE __________________________ CONTACT PHONE Note: _________________________ _________________________ _________________________ _________________________ _________________________ Photograph must accompany any doorway that has more than a 2” protrusion in the frame, or any nonstandard 2” hollow metal frame. Variations due to molding, wall conditions and circumstances may interfere with The Door SwitchTM. Door Number & Hallway Example Door _________________________ __1__ Hall __A__ Door Width Door Height Outer Frame Width 3 5 3/4 ” 83” 40 ” Inner Frame Width 36” Outer Frame Height Inner Frame Height 86” 84 ” Hinge Size 4 1 /2 ” Door Handing Hinge Type RH/LH butt Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ Door ______ Hall ______ The safety of this product depends on the EXACT MEASUREMENTS of EACH Door. Measurements are to be taken from the high/pull side of the door. * See MEASURING DOORS. PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 17 Liability Release Form Limitation of Liability 1. To the maximum extent permitted by law, and except for claims arising out of (i) any indemnification obligation of The Door Switch (“Supplier”) resulting from a third-party claim made against _____________________________________ (“Purchaser”) with respect to the product (expressly excluding however any indemnification claims that seek to impose liability for consequential, indirect, exemplary, special, punitive or liquidated damages, which such damages purchaser hereby waives and releases supplier from), or (ii) Supplier’s gross negligence or willful misconduct, Purchaser acknowledges and agrees that neither Supplier, its affiliates, contractors, managers, officers, directors, shareholders, employees or agents (collectively, “Supplier,” which also includes all manufacturers and other suppliers of the product or its components) will be responsible for, and Purchaser waives and relinquishes any claim against Supplier arising from (whether in contract, in tort, for infringement, under any warranty, in negligence or otherwise), any damage, liability, loss, cost or other expense (including, without limitation, attorneys’ fees), whether direct, indirect, consequential (including, without limitation, any loss of anticipated profits incurred by purchaser or its customers), exemplary, special, incidental, punitive or liquidated, that Purchaser or any third party may suffer which is related to, or results from, Purchaser’s or third party’s use of the product. 2. Purchaser further acknowledges and agrees that Purchaser’s sole and exclusive remedy against Supplier, and Supplier’s sole and exclusive liability, due to or arising from any alleged failure, defect or non-compliance with applicable specifications of the product (whether due to supplier’s negligence or otherwise) shall be the repair or replacement of the product, or the refund of the amount of the purchase price paid by Purchaser, at Supplier’s option, subject to and governed by Purchaser’s warranty rights. 3. It is expressly understood that any technical advice furnished by Supplier with respect to the product is given without charge, and Supplier assumes no obligation or liability for the advice given or results obtained. All such advice being given and accepted at Purchaser’s risk. 4. Purchaser further acknowledges and agrees that the price stated for the product and Supplier’s agreement to manufacture and Supply the product, is a consideration in limiting Supplier’s liability. 5. Supplier assumes no obligation or liability for defects, damage, or failure caused by the common carrier, uncertified or unauthorized installer, user, or other persons, or resulting from, without limitation, any of the following: careless handling including its own negligence; modification of any type for any reason (including modification to meet local codes); improper installation (including installation not in accordance with instructions and specifications provided by Supplier); improper voltage supply or unauthorized electrical modification; misuse; incorrect operation, or lack of proper routine maintenance; or acts of God, such as lightning, floods, earthquakes, etc. Signature of Purchaser: _________________________________________________________ Organization: _________________________________________________________ Date: ______/______/_______ 18 PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 Typical Door Switch System Layout 120V, 60HZ TRANSFORMER (SUPPLIED WITH CONTROL PANEL) POLLING LOOP EXTENDER (** IF REQUIRED) SHORT CIRCUIT ISOLATOR POLLING LOOP AUX. 12VDC PWR. TO NEXT COMPONENT REQUIRING POWER DATA IN/OUT TO NEXT KEYPAD (** IF REQUIRED) ALARM RESET INPUT STROBE RELAY MODULE CONTROL PANEL NOTIFICATION OUTPUT AUDIBLE ALARM TO NEXT STROBE RELAY MODULE AND SWITCH INTERFACE MODULE SWITCH INTERFACE MODULE KEYSWITCH ISOLATION MODULE POWER TRANSFER HINGE SECTION TO NEXT KEYSWITCH STROBE DOOR SWITCH KEYPAD KEYSWITCH TYPICAL DOOR SWITCH SYSTEM RISER. CONTINUOUS HINGE SECTION PATIENT ROOM CORRIDOR PATIENT ROOM BATHROOM ** Used when expanding The Door SwitchTM system (consult factory) PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,039 19 Measuring Doors Measuring for Continuous Hinge Application The Door Switch TM Of the 1500 suicides committed annually while inpatient, The Joint Commission finds... “In 75% of the cases, the method of suicide was a hanging in a bathroom, bedroom or closet.” Because of this rising trend, the Joint Commission has made reducing these types of events a National Patient Safety Goal. The behavioral healthcare professionals face a unique set of challenges in their facilities. Their job is to keep the patient safe, while also maintaining the patient’s right to privacy. The Door Switch provides a solution. This safety product is an over-the-door pressure switch that activates an alarm when patients try to use the door as a hinge point for ligature devices. This patented device retrofits on existing doors, does not involve cutting down the door and provides constant monitoring to assist the nursing staff. The Door Switch has been proven to work and has been developed at a beta site for four years where it has been redesigned to remove hinge points and create the most effective product possible. Measuring for Double Acting Doors / Pivots FRAME FACE WIDTH FRAME FACE WIDTH INNER FRAME & DOOR WIDTH INNER FRAME HEIGHT Statistics Source: Copyright 2008 Joint Commission on Accrediation of Healthcare Organizations; August 2008; Volume 34, Number 8 FRAME FACE WIDTH CENTER HUNG PIVOT DOORWAY PIVOT POINT INSET NORMAL DOOR SWING Behavioral Healthcare Door Safety Life More Secure. The Door Switch is an over-the-door preventative measure for your psychiatric facilities. Life More Secure. www.thedoorswitch.com 11772 Westline Industrial Dr. St. Louis, MO 63146 (314) 298-3433 (877) 998-5625 fax (314) 739-4932 local toll free Effective August 13, 2010 The Door Switch is a patented design. Pat No. 7,466,237 For more information, please visit www.thedoorswitch.com or call toll free at (877) 998-5625.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project