MOON by SIMAUDIO Evolution Series 870A audio amplifier Owner’s Manual

Below you will find brief information for Evolution Series 870A. Evolution Series 870A is a powerful audio amplifier that can be used for both balanced and single-ended operation. It has two large toroidal transformers in its power supply for superior dynamics. The amplifier features a high damping factor which yields superior musical dynamics, improved signal speed and refined timbre accuracy.

PDF Download
Document
MOON Evolution Series 870A Owner's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Dual-mono design
  • Balanced operation
  • Bridged-mono operation
  • RS-232 port
  • High damping factor
  • Ultra rigid chassis

Frequently asked questions

The Evolution Series 870A requires 120V / 60Hz or 240V / 50Hz AC power.

Connect your speakers to the speaker binding posts on the rear panel of the Evolution Series 870A. Make sure to respect the polarity of the outputs.

You can operate the Evolution Series 870A in bridged-mono mode by using a Simaudio XLR-BRIDGE Y-cable. One lead from the “Y” adapter must plug into right channel input and the other lead must plug into left channel input. As well, you must use the positive terminal of each output binding post for the loudspeaker connection.
Preparing document for printing…
0%