Samsung HT-H5500W, HT-H4500 User manual

Samsung HT-H5500W, HT-H4500 User manual
HT-H5500W
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
Safety Information
This symbol indicates that high voltage
is present inside. It is dangerous to
make any kind of contact with any
internal part of this product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
●● The
slots and openings in the cabinet and in the back
or bottom are provided for necessary ventilation. To
ensure reliable operation of this apparatus, and to
protect it from overheating, these slots and openings
must never be blocked or covered.
-- Do not place this apparatus in a confined space,
such as a bookcase, or built-in cabinet, unless
proper ventilation is provided.
-- Do not place this apparatus near or over a radiator
or heat register, or where it is exposed to direct
sunlight.
-- Do not place vessels (vases etc.) containing water
on this apparatus. A water spill can cause a fire or
electric shock.
●● Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorized dealer
immediately.
●● This apparatus uses batteries. In your community,
there might be environmental regulations that require
you to dispose of these batteries properly. Please
contact your local authorities for disposal or recycling
information.
●● Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can result in
fire or electric shock.
●● Route power-supply cords so that they are not likely
to be walked on or pinched by items placed on or
against them. Pay particular attention to cords at the
plug end, at wall outlets, and the point where they
exit from the apparatus.
●● To protect this apparatus from a lightning storm,
or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and
power line surges.
●● Before connecting the AC power cord to the DC
adaptor outlet, make sure the voltage designation
of the DC adaptor corresponds to the local electrical
supply.
●● Never insert anything metallic into the open parts
of this apparatus. Doing so may create a danger of
electric shock.
This symbol indicates that important
literature concerning operation and
maintenance has been included with
this product.
●● To
avoid electric shock, never touch the inside of this
apparatus. Only a qualified technician should open
this apparatus.
●● Make sure to plug the power cord in until it is firmly
seated. When unplugging the power cord from a wall
outlet, always pull on the power cord's plug. Never
unplug by pulling on the power cord. Do not touch
the power cord with wet hands.
●● If this apparatus does not operate normally - in
particular, if there are any unusual sounds or smells
coming from it - unplug it immediately and contact an
authorized dealer or service center.
●● Maintenance of Cabinet.
-- Before connecting other components to this
product, be sure to turn them off.
-- If you move your product suddenly from a cold
place to a warm place, condensation may occur on
the operating parts and lens and cause abnormal
disc playback. If this occurs, unplug the product,
wait for two hours, and then connect the plug to
the power outlet. Then, insert the disc, and try to
play back again.
●● Be sure to pull the power plug out of the outlet if
the product is to remain unused or if you are leaving
the house for an extended period of time (especially
when children, elderly, or disabled people will be left
alone in the house).
-- Accumulated dust can cause an electric shock, an
electric leakage, or a fire by causing the power cord
to generate sparks and heat or the insulation to
deteriorate.
●● Contact an authorized service center for information
if you intend to install your product in a location with
heavy dust, high or low temperatures, high humidity,
chemical substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc. Failing
to do so may lead to serious damage of your product.
●● Use only a properly grounded plug and wall outlet.
-- An improper ground may cause electric shock or
equipment damage. (Class l Equipment only.)
●● To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently, the
wall outlet and power plug must be readily accessible
at all times.
2 - English
●● Do
WARNING :
●● TO
PREVENT THE SPREAD OF FIRE,
KEEP CANDLES AND OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
●● This product contains chemicals known to the State of
California to cause cancer and reproductive toxicity.
●● Connect
this equipment to an outlet on a circuit that
the receiver is not connected to.
●● Consult the dealer or an experienced radio/TV
technician for help.
This class B digital product meets all requirements
of the Canadian Interference - Causing Equipment
Regulations.
CLASS 1 LASER product
This product is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
Complies with 21CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
DANGER :
●● VISIBLE
AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID DIRECT EXPOSURE TO BEAM.
(FDA 21 CFR)
CAUTION :
●● CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC
60825-1)
●● THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER. DO NOT
REPAIR THE PRODUCT YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
FCC NOTES (for U.S.A)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on.
If interference is present, the user is encouraged to try to
correct the interference by one or more of the following
measures:
●● Reorient or relocate the receiving antenna.
●● Increase the separation between the equipment and
receiver.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
Important Safety Instructions
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
3 - English
Safety Information
not allow children to hang on the product.
the accessories (battery, etc.) in a location safely
out of the reach of children.
●● Do not install the product in an unstable location such
as a shaky self, a slanted floor, or a location exposed
to vibration.
●● Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact a
service center.
●● To clean this apparatus, unplug the power cord from
the wall outlet and wipe the product using a soft,
dry cloth. Do not use any chemicals such as wax,
benzene, alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can damage
the appearance of the product or erase the printing
on the product.
●● Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases on
the apparatus.
●● Do not dispose of batteries in a fire.
●● Do not plug multiple electric devices into the same
wall socket. Overloading a socket can cause it to
overheat, resulting in a fire.
●● There is danger of an explosion if you replace the
batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent
type.
●● Store
Safety Information
8.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including AV receivers) that produce heat.
9.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the
cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the powersupply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
●● Do
not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
●● Do not use the 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or
3D Active Glasses while moving around may cause
you to bump into objects, trip, and/or fall, and cause
serious injury.
●● If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s
HDMI OUT port using a high-speed HDMI cable. Put
on 3D glasses before playing the 3D content.
●● The product outputs 3D signals only through an HDMI
cable connected to the HDMI OUT port.
●● The video resolution in 3D play mode is fixed to
the resolution of the original 3D video. You can not
change the resolution.
●● Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
●● You must use a high-speed HDMI cable for proper
output of the 3D signal.
●● Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if
you have a 46 inch screen, stay 138 inches (11.5 feet)
from the screen.
●● Place the 3D video screen at eye level for the best 3D
picture.
●● When the product is connected to some 3D devices,
the 3D effect may not function properly.
●● This product does not convert 2D content into 3D.
●● “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of
the Blu-ray Disc Association.
3D Precautions
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the 3D function.
●● Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop viewing 3D
TV, remove the 3D Active Glasses, and rest.
●● Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses, and
rest.
●● A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
4 - English
Contents
Getting Started
Network Services
Accessories
33 Using BD-LIVE™
6
Speaker Components
33 Using DLNA
7
Front Panel
33 Apps
7
Rear Panel
34 Using Opera TV Store
8
Remote Control
35 Screen Mirroring
9
Connecting the Speakers
Connections
Appendix
36 Additional Information
11 Attaching the Toroidal Ferrite Core to the Power
Cord of the Wireless Receiver Module (SWA6000)
12 Connecting to a TV and External Devices
37 Disk and Format Compatibility
42 Troubleshooting
45 Specifications
46 Licenses
13 Connecting to a Network Router
Settings
■■ Figures
and illustrations in this User Manual
are provided for reference only and may differ
from actual product appearance.
14 The Initial Settings Procedure
15 The Home Screen at a Glance
15 Accessing the Settings Screen
16 Settings Menu Functions
19 Network Setup
21 Wi-Fi Direct
22 Upgrading Software
23 Setting Up DLNA
Playing Content
24 Switching the Source Device
24 Playing Commercial Discs
24 Playing a Disc with User Recorded Content
25 Playing Files on a USB Device
26 Controlling Video Playback
27 Playing a Pre-Recorded Commercial Audio Disc
28 Controlling Music Playback
29 Playing Photo Contents
30 Listening to the Radio
30 Using Bluetooth
32 Using the Special Effects Remote Control
Buttons
5 - English
Contents
6
Getting Started
Check the box for the accessories and speaker components listed or shown below.
Accessories
●●
●●
Remote Control (AH59-02533A)
Batteries (AAA size) (4301-000116)
●●
User Manual (AH68-02673A)
(For Power cord)
Power Cable (3903-000598)
FM Antenna (AH42-00021A)
Toroidal Ferrite Core (3301-000144)
Speaker Components
Center
Front x 2
Surround x 2
Speaker Cable x 6
6 - English
Subwoofer
Wireless Receiver
Module (SWA-6000)
MIC 1
MIC 1
MIC 2
5V 0.5A
MIC 1
MIC 1
MIC 2
MIC 1
MIC 1
MIC 2
MIC 2
5V 0.5A
5V 0.5A
MIC 2
5V 0.5A
Front Panel
DISPLAY ICONS
STOP
PLAY/PAUSE
OPEN/CLOSE
VOLUME
CONTROL
POWER
DISPLAY
5V 0.5A
DISC TRAY
REMOTE CONTROL SENSOR
USB
✎✎ When the product is on, do not let children touch the product's surface. It will be hot.
✎✎ To upgrade the product's software through the USB jack, you must use a USB flash drive.
✎✎ When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the
/6
button on the product or the remote. To play the movie, you must select Play Movie or Start in the
disc menu, and then press the v button.
✎✎ If you are using the Internet or are playing content from a USB device on your TV through the home
theater, you cannot select the BD/DVD mode with the FUNCTION button. To select the BD/DVD
mode, exit the Internet or stop the content you are playing on the TV, and then select the BD/DVD
mode.
Rear Panel
AUX IN
COOLING FAN
POWER CORD
* FM ANTENNA
HDMI OUT
SPEAKER OUTPUT
CONNECTORS
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
LAN TERMINAL
* Connecting the FM Antenna
1. Connect the supplied FM antenna to the FM ANT Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to
a wall or other rigid surface.
✎✎ Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate
ventilation.
Do not obstruct the cooling fan or ventilation holes.
✎✎ This product does not receive AM broadcasts.
7 - English
Getting Started
FUNCTION
5
Getting Started
Remote Control
Tour of the Remote Control
Turn the product on and off.
FUNCTION
Adjust the volume.
Press numeric buttons to
operate options.
Press to view the disc menu.
-
VOLUME
MUTE
+
1
2
3
4
5
6
7
8
DISC MENU
POPUP
Press to skip backwards or forwards.
Press to play a disc or files.
Press to stop a disc or files.
HOME
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
Use to enter the Popup
menu/Title menu.
Press to search backwards or
forwards.
Press to pause playing.
Allows you to repeat a title,
chapter, track or disc.
TOOLS
INFO
Press to use the Tools menu.
Select on-screen menu items
and change menu values.
Return to the previous menu.
Cut off the sound temporarily.
REPEAT
Selects the disc subtitle language.
Press to move to the Home screen.
To open and close the disc tray.
9
TITLE MENU
0
SUBTITLE
Press to select Home Theater's
mode. (BD/DVD, D. IN, AUX,
etc.).
EXIT
RETURN
TUNER
MEMORY MO/ST
A
B
TV SOUND DSP/EQ
C
Press to direct audio signal to home
theater speaker or TV speaker.
(See page 32)
Press to exit the menu.
Use to set a preset radio frequency.
D
TUNING
DOWN
Use to display the playback
information when playing
a Blu-ray/DVD disc or files.
UP
Select MONO or STEREO for radio
broadcasts.
Search for active FM stations and
to change channels.
Select the desired DSP/EQ audio
mode.
Installing batteries in the Remote Control
✎✎ Make sure to match the "+" and "–" ends of the batteries
with the diagram inside the compartment.
✎✎ Assuming typical usage, the batteries last for about one
year.
✎✎ The remote control can be used up to approximately 23
feet
(7 meters) from the product in a straight line.
8 - English
Battery size: AAA
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet shelf, or
under the TV stand.
Center
Product
Front (R)
Surround (R)
Front (L)
Surround (L)
Selecting the Listening Position
The listening position should be
located about 2.5 to 3 times the TV's
screen size away from the TV. For
example, if you have a 46 inch screen,
locate the listening position 115 to
138 inches (9.6 to 11.5 feet) from the
screen.
Wireless
Receiver Module
Front Speakers
Place these speakers in front of your listening position, facing inwards (about
45°) toward you. Place the front speakers so that their tweeters will be at the
same height as your ear. Align the front face of the front speakers with the
front face of the center speaker or place them slightly in front of the center
speakers.
Center Speaker
It is best to install the Center Speaker at the same height as the front speakers.
You can also install it directly over or under the TV.
Surround Speakers
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Position them about 2 to 3
feet (60 to 90cm) above your ear, facing slightly downward.
* Unlike the front and center speakers, the surround speakers are used mainly
for sound effects. Sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
* Surround speakers must be connected to the wireless receiver module.
* The appearance of your speakers may differ from the illustrations in this manual.
*Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end.
Match the band on each cable to the speaker label by color, and then connect the cable to the speaker. See
page 10 for exact instructions.
9 - English
Connections
Subwoofer
Connections
Speaker Cable Connections
1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each
bundle to the colored sticker on the bottom or back of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of
the speaker plugs to the colors of the speaker jacks.
Center Speaker
Front Speaker (L)
Subwoofer
Surround
Speaker (L)
Surround
Speaker (R)
Front Speaker (R)
Wireless Receiver Module
* This product should be connected with the SWA-6000 only.
✎✎ If you place a speaker near your TV set, the screen color may be distorted because of the magnetic
field.
✎✎ Place the wireless receiver module at the rear of the listening position. If the wireless receiver module
is too close to the product, sound from the speakers may be disrupted because of interference.
✎✎ If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other
device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be
disrupted because of interference.
✎✎ The maximum transmission distance from the product to the wireless receiver module is about 33
feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or
metallic wall is between the product and the wireless receiver module, the system may not operate
at all, because the radio waves cannot penetrate metal.
✎✎ If the product doesn't make a wireless connection, you need to run an ID Set between the product
and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote
control. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on the back
of the wireless receiver module for 5 seconds, and then turn the product on.
10 - English
| CAUTION |
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall
wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully
hang each speaker on a screw or nail.
▶▶
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
▶▶
When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is correct.
▶▶
Keep
the subwoofer speaker out of reach of children to prevent children from inserting their hands
or alien substances into the duct (hole) of the subwoofer speaker.
▶▶
Do not hang the subwoofer on the wall using the duct (hole).
▶▶
he wireless receiving antenna is built into the wireless receiver module. Keep it away from water
T
and moisture.
▶▶
For optimal listening performance, make sure that the area around the wireless receiver module
location is clear of any obstructions.
▶▶
In 2-CH mode, you will hear no sound from the wireless surround speakers.
Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless Receiver
Module (SWA-6000)
If you attach a Toroidal ferrite core to the power cord of the wireless receiver module, it will help prevent RF
interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make two loops in the wireless receiver module power cord.
3. Attach the Toroidal ferrite core to the wireless receiver module's
power cord as shown in the figure on the right, and then close it
by pressiing it until it clicks.
●● Attach the ferrite core as close to the Wireless Receiver Module
as possible.
11 - English
Connections
▶▶
Connections
Connecting to a TV and External Devices
R
Red
W
White
Method 1
External Devices
Method 2
AUDIO OUT
OPTICAL OUT
HDMI IN
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with
only this cable connected. See page 17 in this manual and the section on ARC in your TV's user's manual
for details.
Connecting to External Devices
Two methods of connecting external devices to your home theater are explained below.
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on
the external analog component.  Select the AUX mode.
●● Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital
optical cable.  Select the D. IN mode.
✎✎ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
✎✎ This system supports Digital sampling frequencies of 32 kHz or higher from external digital
components.
✎✎ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not
supported.
Selecting an External Device to Use
To select an external device after you have connected it, press the FUNCTION button. Each time you press the
button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; FM ; BT
12 - English
Wireless Network
Connecting to a Network Router
You can connect your product to your network
router using one of the methods illustrated below.
Wired Network
Broadband modem
(with integrated router)
Broadband
service
Broadband
service
Or
✎✎ If your wireless IP router supports DHCP, this
Router
Broadband
service
Broadband
modem
product can use a DHCP or static IP address to
connect to the wireless network.
✎✎ Set your wireless IP router to Infrastructure
mode. Ad-hoc mode is not supported.
✎✎ The product supports only the following
wireless security key protocols:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
✎✎ Select a channel on the wireless IP router that
✎✎ Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
✎✎ DSL users, please use a router to make a
network connection.
✎✎ To use the DLNA function, you must connect
your PC to your network as shown in the
illustrations above.
The connection can be wired or wireless.
is not currently being used. If the channel set
for the wireless IP router is currently being
used by another device nearby, it will result in
interference and communication failure.
✎✎ In compliance with the newest Wi-Fi
certification specifications, Samsung home
theaters do not support WEP, TKIP, or TKIPAES (WPS2 Mixed) security encryption in
networks running in the 802.11n mode.
✎✎ Wireless LAN, by its nature, may cause
interference, depending on the operating
conditions (AP performance, distance,
obstacles, interference by other radio devices,
etc).
13 - English
Connections
Wireless IP sharer
Settings
The Initial Settings Procedure
●● The
Home menu will not appear if you do not
configure the initial settings.
●● The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
●● The access steps may differ depending on the
menu you selected.
1. Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
2. Press the ▲▼ buttons to select the desired
language, and then press the v button.
3. Press the v button to start function setup.
4:3 Pan-Scan - For older, standard screen,
analog TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in Pan-Scan format that fills
the screen, but cuts off the left and right sides
of the picture and enlarges the middle vertically.
5. The Network screen appears.
-- Before you begin, confirm that the product is
connected to your router.
-- Set to wired or wireless depending on your
network environment.
-- If you have a network with static IP addresses,
we suggest you select Skip by pressing the
BLUE (D) button.
✎✎ If you skip network setup here or the setup
does not work correctly, you can set up the
product's network connection later. (See page
19)
Initial Settings | Network
Select your network type.
Initial Settings
Network Type
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Wireless
Wired
Connect
Network cable connected.
Start
a Previous
" Select
4. The TV Aspect screen appears. Press the ▲▼
buttons to select a TV aspect ratio, and then
press the v button.
You have four choices:
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and 4:3 pictures (the old, standard format) in
4:3 pillar box format with black bars on the left
and right.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and expands 4:3 pictures to fill the 16:9 screen.
4:3 Letter Box - For older, standard screen,
analog TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in letter box format that
retains the 16:9 aspect ratio but puts black bars
above and below the picture.
6. The product verifies the network connection
and then connects to the network. When it is
done, press the v button. The "Initial settings
completed." screen appears, and then the
Home screen appears.
✎✎ If you want to display the Initial Settings screen
again and make changes, select the Reset
option. (See page 18)
✎✎ If you use an HDMI cable to connect the
product to an Anynet+ (HDMI-CEC)-compliant
Samsung TV and 1.) You have set the Anynet+
(HDMI-CEC) feature to On in both the TV
and the product and 2.) You have set the
TV to a language supported by the product,
the product will select that language as the
preferred language automatically.
14 - English
The Home Screen at a Glance
1
8 Function
2
Play Disc
Photos
Videos
Music
Use for switching to an external device, and
for radio and mode switching for a Bluetooth
connection. You can use the remote control’s
button
FUNCTION button and the main unit’s
for mode switching.
9 Settings
Set various functions to suit your personal
preferences.
Blu-ray
App 2
App 3
3
App 4 Opera TV More
Store
Screen Change Function Settings
Mirroring Device
45 6 7 8 9
1 Play Disc
located on your PC, you must connect your
home theater and PC to a home network and
you must download, install, and configure the
DLNA software on your PC. (See page 23)
Accessing the Settings Screen
1. Select Settings on the Home screen, and then
press v. The Settings screen appears.
The disc currently in the tray is displayed.
Press v to start playing the disc.
Settings
2 Photos/Videos/Music
Display
3D Settings
Play photos, videos, or music content from
Disc, USB, PC, or mobile devices.
Audio
TV Aspect Ratio
: 16:9 Original
Network
BD Wise
: Off
System
Resolution
: Auto
Language
Movie Frame (24Fs)
: Off
Security
HDMI Color Format
: Auto
General
HDMI Deep Color
: Off
Support
Progressive Mode
: Auto
3 Apps
Access various for pay or free-of-charge
applications.
4 Opera TV Store
Makes the Web-based App for TV available for
use.
5 More
2. To access the menus, sub-menus, and options
on the Settings screen, please refer to the
remote control illustration. (See page 16)
A list of useful and popular apps we recommend.
✎✎ If you leave the product in the stop mode for
6 Screen Mirroring
Set up the wireless mirroring function between
the home theater and a smart phone or tablet.
more than 5 minutes without using it, a screen
saver will appears on your TV. If the product is
left in the screen saver mode for more than 20
minutes, the power automatically turns off.
7 Change Device
Displays a list of external devices connected to the
main unit. Switch to the desired device.
15 - English
Settings
App 1
✎✎ To play or view video, photo, music files
-
+
1
2
3
4
5
6
7
8
Settings
DISC MENU
9
TITLE MENU
0
POPUP
Buttons on the Remote Control Used for
the Settings Menu
SUBTITLE
1
HOME
Display
REPEAT
3D Settings
TOOLS
INFO
RETURN
EXIT
3
2
4
TUNER
MEMORY MO/ST
A
B
TV SOUND DSP/EQ
C
D
TUNING
1
HOME Button : Press
to the Home
UP
DOWNto move
screen.
2
RETURN Button : Press to return to the
previous menu.
3
v (ENTER) / DIRECTION Button :
●● Press ▲▼◀▶ to move the cursor or
select an item.
●● Press the v button to activate the
currently selected item or confirm a
setting.
4
Settings Menu Functions
Set up the 3D related functions.
3D Blu-ray Playback Mode: Select whether
to play a Blu-ray Disc with 3D contents in 3D
Mode. If you move to the Home menu while
in 3D mode, the product will switch to 2D
automatically.
Screen Size: Enter the size of the TV attached to
the product. The product will automatically adjust
the 3D output to the screen size of the TV.
✎✎ Carefully read the health and safety information
before viewing 3D content. (See page 4)
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size of your TV. (See page 36)
BD Wise
BD Wise is Samsung’s latest inter-connectivity
feature. When you connect a Samsung product
and a Samsung TV with BD Wise to each other
via HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray/DVD Disc.
EXIT Button : Press to exit the current
menu.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◀▶ buttons to select the
function, menu item, or option. The explanation will
usually appear on the bottom of the screen.
A short description of each Settings function starts
on this page. Additional information on some of the
functions is also in the Appendix of this manual.
Resolution
Lets you set the output resolution of the HDMI
video signal to BD Wise, Auto, 1080p, 1080i,
720p, 480p. The number indicates the number
of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively. The
more lines, the higher quality.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto lets
the product adjust its HDMI output to 24 frames
per second automatically for improved picture
quality if attached to a 24Fs compatible TV.
●● You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
●● Movie Frame is only available when the product
is in the HDMI 1080p output resolution modes.
HDMI Color Format
Lets you set the color space format for the HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
16 - English
Dynamic Range Control
Lets you set the product to output video from
the HDMI OUT jack with Deep Color. Deep Color
provides more accurate color reproduction with
greater color depth.
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD audio.
Auto: Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control off for Dolby Digital and
Dolby Digital Plus.
Off: Leaves the dynamic range uncompressed,
letting you hear the original sound.
On: Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Audio
Speaker Settings
Lets you adjust the following speaker settings and
turn the test tone on and off so you can test the
speakers.
Level: Lets you adjust the relative loudness of
each speaker from 6dB to -6dB. For example,
if you like deep bass, you can increase the
loudness of the subwoofer by 6dB.
Distance: Lets you adjust the relative distance
of each speaker from the listening position up
to 30 feet. The farther the distance, the louder
the speaker will be.
Test Tone: Lets you run the Test Tone function so
you can test your adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it to Off turns it
off.
Speaker Selection
Downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system. You can
choose to have the product downmix to Normal
Stereo or to Surround Compatible.
Audio Sync
When the product is attached to a digital TV, lets
you adjust the audio delay so that the audio syncs
with the video. You can set the delay between 0
and 300 milliseconds.
Network
Network Settings
Lets you select which speakers you want active,
either the TV's speakers or the home theater's
speakers.
Lets you configure the network connection so
you can enjoy various features such as Internet
services or DLNA Wi-Fi functionality, and perform
software upgrades.
Audio Return Channel
Network Test
Lets you direct the sound from the TV to the
Home Theater speakers. Requires an HDMI
connection and an Audio Return Channel (ARC)
compatible TV.
●● If Audio Return Channel is set to on and you are
using an HDMI cable to connect the product to
the TV, digital optical input will not work.
●● If Audio Return Channel is set to Auto and
you are using an HDMI cable to connect the
product to the TV, ARC or digital optical input is
selected automatically.
Lets you test the Internet Protocol setup to see if
it is working correctly.
Digital Output
Lets you set the Digital Output to match the
capabilities of the AV receiver you’ve connected to
the product. For more details, please refer to the
digital output selection table. (See page 41)
Network Status
Lets you check the current network and Internet status.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct device to the
product using a peer-to-peer network, without
the need for a wireless router.
Note that if the product is connected to a wireless
network, it may be disconnected when you use
Wi-Fi Direct. (See page 21)
✎✎ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the Wi-Fi Direct function.
17 - English
Settings
HDMI Deep Color
Settings
Screen Mirroring
Language
The Screen Mirroring function lets you view the
screen of your smart phone or smart device on
the TV you have connected to the home theater
system. (See page 35)
Lets you select the language you prefer for the
On-Screen Menu, disc menu, etc.
●● The selected language will only appear if it is
supported on the disc.
Device Name
Lets you assign an identifying name to the
product. You use this name to identify the
product when you are connecting external Wi-Fi
devices (smart phones, tablets, etc.) to it.
Security
The default PIN is 0000. Enter the default PIN to
access the security function if you haven't created
your own PIN.
BD Parental Rating
BD-Live Internet Connection
Lets you allow or prohibit an Internet connection
for the BD-Live service.
Prevents playback of Blu-ray Discs with a rating
equal to or above a specific age rating unless you
enter the PIN.
DVD Parental Rating
System
Initial Settings
Prevents playback of DVDs with a rating above a
specific numerical rating unless you enter the PIN.
Lets you re-run the Initial Settings procedure. (See
page 14)
Change PIN
Quick Start
Changes the 4-digit PIN used to access security
functions.
You can turn on the power quickly by decreasing
the boot time.
✎✎ If this function is set to On, Standby power
consumption will be increased. (About 12W
~ 20W)
General
Time Zone
Lets you specify the time zone that is applicable to
your area.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung products
that have the Anynet+ feature and lets you control
those products with one Samsung TV remote.
To operate this function, you must connect this
product to an Anynet+ Samsung TV using a HDMI
cable.
BD Data Management
Lets you manage the contents you downloaded
through a Blu-ray disc that supports the BD-Live
service. You can view the information about the
USB device you are using for BD Live data storage
including the storage space. You can also delete
BD Live data and change the device.
Support
Software Upgrade
For more information about this function see
page 22.
Contact Samsung
Provides contact information for assistance with
your product.
Terms of Service Agreement
View the general disclaimer regarding third party
contents and services.
Reset
Reverts all settings to their defaults except for the
network. Requires that you enter your security
PIN. The default security PIN is 0000.
18 - English
Network Setup
Network Settings
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
Configuring Your Network Connection
To begin configuring your network connection,
follow these steps:
1. In the Home screen, select Settings, and then
press the v button.
2. Select Network, and then press the v button.
4. Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks on the bottom right of this page.
Wired Network
ĞĞ
Wired – Automatic
After following Steps 1 to 3 above:
1. In the Network Settings screen, change
Network Type to Wired. Then, select Connect
and press the v button. The product detects
the wired connection, verifies the network
connection, and then connects to the network.
2. When it is done, highlight OK, and then press
v button.
ĞĞ
Wired - Manual
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
XX:XX:XX:XX:XX:XX
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
IP auto setting failed. Try the following to set up IP automatically, or set up the IP manually by
selecting 'IP Settings'.
- Ensure that DHCP server is enabled on the wireless network, and then unplug and re-plug the wireless
network.
- Contact your Internet Service Provider for more information.
Change Network
IP Settings
a Previous
Retry
d Skip
Close
< Move
" Select
2. Use the ◀▶ buttons to select IP Settings, and
then press the v button. The IP Settings
screen appears.
3. Select the IP Setting field, and then set it to
Enter manually.
4. Select a parameter to enter (IP Address, for
example), and then press v. Use the number
keypad on your remote control to enter the
numbers for the parameter. You can also enter
numbers using the ▲▼ buttons. Use the ◀▶
buttons on the remote control to move from
entry field to entry field within a parameter.
When done with one parameter, press the v
button.
5. Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.
6. Repeat Steps 4 and 5 until you have filled in all
parameters.
✎✎ You can get the network parameter values
If you have a static IP address or the automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 above:
from your Internet provider.
1. In the Network Settings screen, change
Network Type to Wired. Then, select Connect
and press the v button.
The product searches for a network, and then
displays the connection failed message.
✎✎ If it is possible to connect the home theater
to your network wirelessly, select Change
Network at this point, change the Network
Type to Wireless, and then go to the
instructions for wireless networks on the
bottom right of this page.
7. When finished entering all the parameter
values, select Return ('), and then press the
v button. The home theater verifies the
network connection and then connects to the
network.
Wireless Network
You can set up a wireless network connection in
three ways:
-- Wireless Automatic
-- Wireless Manual
-- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
19 - English
Settings
3. Select Network Settings, and then press the v
button.
Wired network connection failed.
Settings
ĞĞ
Wireless - Automatic
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 19)
1. In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
Network Settings
Select your network type.
Network Type
4. Enter your wireless network or wireless router's
name.
●● Enter numbers directly using the number
buttons on your remote control.
●● Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the v
button.
●● To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select
, and then press the v button.
●● To
Wireless
display symbols and punctuation, select
123#&, and then press the v button. To
redisplay letters, select 123#&, and then
press the v button.
When finished, select Done, and then press the
v button.
Wireless network
si-ap
You can connect your BD
Home Theater to the
internet. Please select which wireless
network to use.
MIC
KIMING_VTOWER
WPS(PBC)
Search
m Move
" Select
' Return
2. Select the desired network, and then press the
v button.
3. On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with ▲▼◀▶ buttons, and
then pressing v button.
4. When finished, select Done, and then press the
v button. The product verifies the network
connection and then connects to the network.
✎✎ You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
ĞĞ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 19)
1. In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
2. Scroll through the list, select the desired
network or Add Network, and then press the
v button.
5. On the Security method screen that appears,
use the ▲▼ buttons to select the network's
Security method, and then press the v
button. On the next screen, enter your
network's security code or pass phrase.
●● Enter numbers directly using the number
buttons on your remote control.
●● Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the v
button.
When finished, select Done, and then press
the v button. The product searches for the
network.
6. The Network connection fail screen appears.
Use ◀▶ buttons to select IP Settings, and then
press the v button.
7. Select the IP Setting field, and then set it to
Enter manually.
8. Select a network parameter to enter (IP
Address, for example), and then press v
button. Use the number keypad on your remote
control to enter the numbers for the parameter.
You can also enter numbers using the ▲▼
buttons. Use the ◀▶ buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one value,
press the v button.
9. Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
10. Repeat Steps 8 and 9 until you have filled in all
parameters.
3. If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
20 - English
✎✎ You can get the Network parameter values
from your Internet provider.
Wi-Fi Direct
11. When finished, select Return ('), and then
press the v button. The Security Key screen
appears.
The Wi-Fi Direct function allows you to connect WiFi Direct devices to the product and each other using
a peer-to-peer network, without a wireless router.
12. On the Security Key screen, enter your
network's Security Code or Pass Phrase. Enter
numbers directly using the number buttons on
your remote control. Enter letters by selecting
a letter with the ▲▼◀▶ buttons, and then
pressing the v button.
✎✎ Some Wi-Fi Direct devices may not support
14. After the home theater verifies the network,
select OK, and then press the v button.
✎✎ You can also begin the Manual Network setup
by going to Settings > Network > Network
Status.
ĞĞ
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC) function.
If your wireless router has a WPS(PBC) button,
follow these steps:
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 19)
1. In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
2. Scroll the list down, select WPS(PBC), and then
press the v button.
3. Press the WPS(PBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network after the
network connection is verified.
4. When it is done, highlight OK, and then press
the v button.
✎✎ For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
2. In the Home screen, select Settings, and then
press the v button.
3. Select Network, and then press the v button.
4. Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can connect
to appear.
Settings
Display
Wi-Fi Direct
AudioDevice Name : HT-H5500
Select your Wi-Fi Direct device to connect to.
Network
AndroidXXXXXXX
System
Not Connected
Language
Security
Refresh
Close
General
Support
5. You have three ways to complete the Wi-Fi
connection:
●● Through the Wi-Fi device.
●● Through the product using PBC.
●● Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
21 - English
Settings
13. When finished, select Done at the right of the
screen, and then press the v button. The
product verifies the network connection and
then connects to the network.
the DLNA function if connected via Wi-Fi
Direct. If this is the case, change the network
connection method you used to connect the
device to the home theater.
✎✎ Wi-Fi Direct transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the Wi-Fi Direct function on
any device in which it is currently on.
1. Turn on the Wi-Fi Direct device and activate its
Wi-Fi Direct function.
Settings
2. When you have completed the procedure, you
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Select OK, and then
press the v button to accept.
3. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
●● The
PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the v
button.
●● Never
turn the product off or back on manually
during the update process.
●● The update is complete when the product turns
off after restarting. Press the POWER button to
turn on the updated product for your use.
●● Samsung Electronics takes no legal
responsibility for product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
upgrade.
1. In the Home menu, select Settings, and then
press the v button.
2. Select Support, and then press the v button.
3. Select Software Upgrade, and then press the
v button.
2. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
4. Select one of the following methods:
●● By Online
●● By USB
●● Auto Upgrade Notification
Through the Product Using a PIN
5. Press the v button.
Directions for each method begin below.
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the v
button.
2. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
✎✎ The current wired or wireless network
connection will be disconnected when you use
the Wi-Fi Direct function.
✎
✎ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the Wi-Fi Direct function.
✎✎ If you want to cancel the upgrade while the
upgrade software is downloading, press the
v button.
By Online
Your product must be connected to the Internet to
use the By Online function. Remove all discs before
you begin.
1. Select By Online, and then press the v button.
The Connecting to Server message appears.
2. If an update is available, a popup message
appears asking if you want to upgrade. If you
select Yes, the product turns off automatically,
turns on, and then begins the upgrade.
3. The update progress popup appears. When
the update is completed, the product turns off
automatically again.
4. Press the POWER button to turn on the
product.
Upgrading Software
The Software Upgrade menu allows you to
upgrade the product’s software for performance
improvements or additional services.
By USB
1. Visit www.samsung.com.
2. Click SUPPORT on the top right of the page.
3. Enter the product's model number into the
search field. As you enter the model number, a
drop down will display products that match the
model number.
22 - English
4. Left click your product's model number in the
drop down list.
5. On the page that appears, scroll down to and
then click Firmware Manuals & Downloads.
6. Click Firmware in the center of the page.
7. Click the ZIP icon in the File column on the right
side of the page.
8. Click Send in the first pop-up that appears.
Click OK in the second pop-up to download
and save the firmware file to your PC.
5. Press the POWER button to turn on the
product.
Setting Up DLNA
DLNA enables you to play music, video, and photo
files located in your PC using this product. To use
DLNA, you must connect the product to your PC
via the network (See page 13) and install the
SAMSUNG PC Share Manager on the PC.
10. Copy the folder to a USB flash drive.
To Download the DLNA Software
11. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the USB
port of the product.
To use DLNA with your PC, you must install DLNA
software on your PC. You can download the PC
software and get detailed instructions for using
DLNA from the Samsung.com website.
12. In the product’s menu, go to Settings > Support
> Software Upgrade.
1. Go to www.samsung.com.
13. Select By USB.
2. Click SUPPORT at the top of the page.
14. The home theater searches for the software on
the USB drive. When it finds the software, the
Update Request pop-up appears.
3. Enter the product's model number into the
search field. As you enter the model number, a
drop down will display products that match the
model number.
15. Select OK. The home theater turns off, turns
on, and then begins the upgrade. When the
upgrade is done, the home theater turns off.
4. Left click your product's model number in the
drop down list.
16. Press the POWER button to turn on the home
theater.
5. On the page that appears, scroll down to and
then click Firmware Manuals & Downloads.
✎✎ There should be no disc in the product when
6. Click the Software tab.
you upgrade the software using the USB Host
jack.
✎✎ When the software upgrade is done, check
the software details in the Software Upgrade
menu.
Auto Upgrade Notification
If your product is connected to the network and you
set Auto Upgrade Notification on, the product will
notify you if a new software version is available with
a pop-up message.
1. Turn on the product.
2. In the Software Upgrade menu, set Auto
Upgrade Notification to On.
If there is a new software version available, the
product will notify you with a pop-up message.
3. To upgrade the firmware, select Yes. The
product turns off automatically, turns on, and
then begins the upgrade.
7. On the software tab, click the EXE icon on the
right side of the DLNA line.
8. In the first pop-up that appears, click Send. In
the second pop-up, click Save File.
9. Find the DLNA install file on your disk, and then
double click the file.
10. In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
Download the DLNA Installation/Instruction
manual from the same Software Tab by clicking the
corresponding PDF file symbol in the File column
on the right. The file, in PDF format, will download
and open. Follow the directions to install and setup
DLNA. You can view and/or save the file.
✎✎ To use DLNA with your smart phone, you
need to connect your home theater and smart
phone to the same network.
23 - English
Settings
9. Unzip the zip archive to your computer. You
should have a single folder with the same name
as the zip file.
4. The update progress popup will appear. When
the update is complete, the product will turn
off automatically again.
Playing Content
Your home theater can play content located on
Blu-ray/DVD/CD discs, USB devices, PCs, smart
phones, tablets, and in Apps.
To play content located on your PC or a mobile
device, you must connect the PC or mobile device
and the product to your network. To play content on
your PC, you must also download and install DLNA
network software or already have DLNA network
software on your PC.
✎✎ PCs running Windows 7 and Windows 8 have
DLNA software (Play To) built in.
Switching the Source Device
If two or more external devices are connected to the
main unit, you can use any of the three methods
described below to change the source device.
Method 1
From the Home screen, use the ▲▼◀▶ buttons to
move to Change Device, and then press v.
The Change Device popup window will appear. Use
the ▲▼ buttons to move to the desired device, and
then press v.
Method 2
If you move to Photos, Videos, Music or other filebased contents, a list of folders and files will appear.
Press the RED (A) button to display the Change
Device popup window, use the ▲▼ buttons to move
to the desired device, and then press v.
Method 3
When a device is connected for the first time, a
popup window appears on which you can change
the source device by using the ◀▶ buttons.
Playing Commercial Discs
1. Press the ^ button to open the disc tray.
2. Place a disc gently into the disc tray with the
disc’s label facing up.
3. Press the ^ button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically, press
the 6 button on the remote.
Disc Storage & Management
●● Holding
Discs
-- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-- Avoid touching the surface of a disc where data
has been recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
●● Cleaning Discs
-- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
-- When cleaning, wipe gently from
the inside to the outside of the disc.
-- Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protective jacket and store
vertically.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded on
Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc tray with
the disc’s label facing up, and then close the
tray.
2. Use the ▲▼◀▶ buttons to select the type of
content you want to view or play - Photos,
Videos, or Music - and then press the v
button.
OR
2-1.Select Play Disc from the Home screen. The Play
Disc screen appears. Use the ▲▼ buttons to
select the desired content type, Photos, Videos,
or Music.
24 - English
3. A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
4. If necessary, use the ▲▼◀▶buttons to select a
folder, and then press the v button.
5. Use the ▲▼◀▶ buttons to select a file to view
or play, and then press the v button.
6. Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return
to the Home screen.
Press the EXIT button to return directly to the
Home Screen.
7. Go to pages 26~30 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
1. Turn the product on.
the product is turned on
1. The "New device connected." pop-up appears.
Music
New device connected.
USB DISK
Photos
4. If necessary, use the ▲▼◀▶ buttons to select
a folder, and then press the v button.
5. Select a file to view or play, and then press the
v button.
6. Press the RETURN button to exit a folder or the
EXIT button to return to the Home screen.
7. Go to pages 26~30 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
✎✎ If you insert a disc when playing a USB device
or phone, the device mode changes to "Disc"
automatically.
✎✎ If your cellular phone is DLNA compatible, you
can play contents without connecting a USB
cable. (See page 33)
Videos
Blu-ray
App 1
App 2
Music
App 3
App 4 Opera TV More
Store
Screen Change Function Settings
Mirroring Device
✎✎ If the pop-up does not appear, go to Method
2.
2. Use the ▲▼ buttons to select Photos, Videos,
or Music and then press the v button.
Depending on how the contents are arranged,
you will see either folders, individual files, or
both.
25 - English
Playing Content
Method 1 : If you connect a USB device while
Videos
you connect a USB device
3. Use the ◀▶ buttons to select Photos, Videos,
or Music on the Home screen, and then press
the v button.
There are two methods you can use to play or view
multimedia files located on a USB device through
your product.
Photos
Method 2 : If the product is turned on after
2. Press Change Device and select a USB device.
Playing Files on a USB Device
Play Disc
3. If necessary, use the ▲▼◀▶ buttons to select
a folder, and then press the v button.
4. Select a file to view or play, and then press the
v button.
5. Press the RETURN button to exit a folder or the
EXIT button to return to the Home screen.
6. Go to pages 26~30 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
Playing Content
Controlling Video Playback
You can control the playback of video content
located on a Blu-ray/DVD disc,FUNCTION
USB device, mobile
device, or PC. Depending
on the
disc or contents,
VOLUME
MUTE
some of the functions
in this manual may
- described
+
not be available.
1
2
3
7
8
9
Buttons on the Remote Control used for
4
5
6
Video Playback
DISC MENU
TITLE MENU
0
POPUP
2
1
2 Using the disc menu, title menu, popup
menu, and title list
DISC MENU
During playback, press this button to display the
Disc menu.
TITLE MENU
During playback, press this button to display the
Title menu.
●● If your disc has a playlist, press the GREEN (B)
button to go to the playlist.
POPUP MENU
SUBTITLE
HOME
During playback, press this button to display the
Popup menu.
REPEAT
3
TOOLS
3 Repeat Playback
INFO
1 Playback related buttons
The product does not play sound in Search, Slow,
EXIT
or Step mode. RETURN
TUNER playback, press the
●● To return to normal speed
MEMORY MO/ST
B
C
D
6 button. A
TV SOUND DSP/EQ
TUNING
DOWN
1. During playback, press the REPEAT button
on the remote control.
2. Press the ▲▼ buttons to select Off, Title,
Chapter, All or Repeat A-B, and then press
the v button.
ĞĞ
UP
Repeat A-B
6
Starts playback.
5
Stops playback.
7
Pauses playback.
2. Press the v button at the point where you
want repeat play to stop (B).
During playback, press the 3 or
4 button.
Each time you press the 3 or 4
button, the playback speed will
change.
3. To return to normal play, press the REPEAT
button again.
Fast Motion
Play
1. Press the v button at the point where you
want repeat play to start (A).
Slow
Motion Play
In pause mode, press the 4
button.
Each time you press the 4 button,
the playback speed will change.
Step Motion
Play
In pause mode, press the 7
button.
Each time you press the 7 button,
a new frame appears.
Skip Motion
Play
During playback, press the 1 or
2 button.
Each time you press the 1 or
2 button, the disc moves to the
previous or next chapter or file.
4. Press the v button.
✎✎ Depending on the disc, the screen may not
display all repeat options.
✎✎ The screen may not display Chapter or
Title immediately. Continue to press the
▲▼ buttons until your choice is inside the
applicable field.
✎✎ To return to normal play, press the REPEAT
button again, press the ▲▼ buttons to
select Off, and then press the v button.
✎✎ The screen may not display Repeat A-B
immediately. Continue to press the ▲▼
buttons until Repeat A-B is inside the
applicable field.
✎
✎ You must set point (B) at least 5 seconds of
playing time after point (A).
26 - English
Using the TOOLS Menu
Subtitle
During playback, press the TOOLS button.
Lets you set the desired subtitle language.
Title
Angle
If there is more than one title on a disk or device,
lets you move to or select a desired title.
To view a scene from another angle. The Angle
option displays the number of angles available to
view (1/1, 1/2, 1/3, etc.).
Playing Time
Lets you go to a specific playback point. Use the
numeric buttons to input the playback point.
Repeat Mode
Lets you repeat a specific title, chapter, or marked
section.
BONUSVIEW Video
BONUSVIEW Audio
Lets you set the desired Bonusview option.
Menu selections that appear only while a file
plays
Full Screen
Lets you adjust the audio delay so that the audio
syncs with the video. You can set the delay from
0 to 300 milliseconds.
Lets you set the desired full screen size. You
can select Original, Mode1 (larger), and Mode2
(largest).
Picture Settings
Information
Lets you set the picture mode.
Select to view video file information.
■■ Mode
-- User : Lets you adjust the Brightness,
Contrast, Color, and Sharpness functions
manually.
-- Dynamic : Choose this setting to increase
sharpness.
-- Normal : Choose this setting for most viewing
applications.
-- Movie : This is the best setting for watching
movies.
Menu selections that appear only when a
BD/DVD disc plays
Chapter
Lets you move to a chapter that you want to
watch.
Audio
Lets you set the desired audio language.
✎✎ Depending on the disc or storage device, the
Tools menu may differ. All options may not be
displayed.
Creating a Video Playlist
You can create a playlist of video files in a way that
is nearly identical to the way you create a playlist of
music files. See page 28 for instructions.
Playing a Pre-Recorded Commercial
Audio Disc
1. Insert an Audio CD (CD-DA) or an MP3 Disc
into the disc tray.
●● For an Audio CD (CD-DA), the first track will
be played automatically. Tracks on a disc
are played in the order in which they were
recorded on the disc.
●● For an MP3 disc, press the ◀▶ buttons to
select Music, then press the v button.
27 - English
Playing Content
Audio Sync
Playing Content
Playlist
Repeat Mode
Track
Rip
> Move
00:00/00:00
CD
< Adjust
04:41
TRACK 004 04:02
TRACK 005 03:43
TRACK 006 03:40
c Select
Tools
5
7 button : Pauses a track.
6
6 button : Plays the currently selected
track.
' Return
TRACK 003 " Pause
4
Fast Play (Audio CD [CD-DA] only) :
During playback, press the 3 or 4
button.
Each time you press the 3 or 4 button,
the playback speed will change.
0/16
Tools
TRACK 001
' Return
2. To play a particular track, use the ▲▼ buttons
on the remote to select the track, and then
press the v button.
✎✎ For more information about playing music, see
Controlling Music Playback below.
Controlling Music Playback
Repeating Tracks
You can set the product to repeat tracks.
1. During music playback, press the TOOLS
button.
2. Use ◀▶ button to select Off, Track or One, All
or Shuffle in Repeat Mode, and then press the
v button.
Creating a Music Playlist
You can control the playback of music content
located on a DVD, CD, USB, mobile device, or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
1. If playing music from a commercial CD or DVD,
press the 5 or RETURN button. The Music List
Screen appears. If you are creating a playlist
from music on a user created disk or USB
device, access the Music list as described on
page 24 or 25.
Buttons on the Remote Control used for
MUTE
Music Playback VOLUME
2. Press the ▲▼◀▶ buttons to move to a desired
file, and then press the YELLOW (C) button
to select it. Repeat this procedure to select
additional files.
FUNCTION
1
-
+
1
2
3
4
5
6
7
8
DISC MENU
9
TITLE MENU
0
POPUP
Music
2
3
SUBTITLE
HOME
TOOLS
1
Number buttons : During Playlist playback,
press the desired track number. The
selected track is played.
EXIT
Skip : During playback, press the 1 or 2
TUNER
MO/ST
button to move to MEMORY
the previous
or next
A
B
C
D
music track.
TUNING
TV SOUND DSP/EQ
DOWN
3
REPEAT
5
6
INFO
RETURN
2
4
3. If you want to select all files, press the TOOLS
button, use the ▲▼ buttons to select Select All,
and then press v. If you want to deselect all
files, press the TOOLS button, select Deselect
All, and then press v.
TRACK 001
1 files selected
TRACK 001
TRACK 002
05:57
04:27
TRACK 003
TRACK 004
04:07
03:41
TRACK 005
TRACK 006
03:17
03:35
TRACK 007
TRACK 008
03:47
03:49
TRACK 009
TRACK 010
03:53
CD
UP
5 button : Stops a track.
28 - English
a Change Device
1/2 Page
03:45
c Select
Tools
() Jump Page
' Return
4. To remove a file from the Playlist, move to the
file, and then press the YELLOW (C) button.
✎✎ Ripping encodes music in the .mp3 format at
5. Press the v button to play the selected files.
The Playlist screen appears.
✎✎ On the Track list screen, you can choose Select
6. To go to the Music List, press the 5 or RETURN
button.
7. To go back to the Playlist, press the v button.
✎✎ You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
✎✎ If you go to the Music List from the Playlist,
and then return to the Playlist, the Playlist will
start playing again from the beginning.
Ripping
2. With the Playback screen displayed, use the
▲▼ buttons to select a track, and then press
the YELLOW (C) button. A check appears to the
left of the track.
3. Repeat Step 2 to select and check additional
tracks.
4. To remove a track from the list, move to the
track, and then press the YELLOW (C) button
again. The check on the track is removed.
5. When done, press the TOOLS button.
The Tools menu appears.
6. Use the ▲▼ buttons to select Rip, and then
press the v button. The Rip screen appears.
7. Use the ▲▼ buttons to select the device to
store the ripped files on, and then press the v
button.
✎✎ Do not disconnect the device while ripping is
in progress.
8. If you want to cancel ripping, press the v
button and then select Yes. Select No to
continue ripping.
9. When ripping is complete, the "Ripping is
completed." message appears.
All or Deselect All.
-- Use Select All to select all tracks, and then
press the v button. This cancels your
individual track selections.
-- Use Deselect All to deselect all selected tracks
at once.
Playing Photo Contents
You can play photo contents located on a DVD, USB,
mobile device, or PC.
Using the Tools Menu
During playback, press the TOOLS button.
Start / Stop Slide Show
Select to play/pause the slide show.
Slide Show Speed
Select to adjust the slide show speed.
Background Music
Select to listen to music while viewing a slide
show.
Zoom
Select to enlarge the current picture.
(Enlarge up to 4 times)
Rotate
Select to rotate a picture. (This will rotate the
picture either clockwise or counter clockwise.)
Information
Shows the picture information including the name
and size, etc.
10. Press the v button to go back to the Playback
screen.
✎✎ This function is not available for DTS Audio
CDs.
✎✎ This function may not be supported by some
discs.
29 - English
Playing Content
1. Insert a USB device into the USB jack on the
front of the product.
192kbps.
Playing Content
✎✎ Depending on the disc or storage device, the
Tools menu may differ. All options may not be
displayed.
✎✎ To enable the background music function, the
photo file must be in the same storage media
as the music file. However, the sound quality
can be affected by the bitrate of the MP3
file, the size of the photo, and the encoding
method.
Creating a Photo Playlist
You can create a photo playlist in nearly the same
way you create a music playlist. See page 28 for
instructions. Select photo files instead of music files.
Listening to the Radio
Presetting Stations
Example : Presetting FM 89.10 into memory.
1. Press the FUNCTION button to select FM.
2. Press the TUNING UP, DOWN button to select
<89.10>.
3. Press the TUNER MEMORY button.
●● NUMBER flashes on the display.
4. Press the TUNER MEMORY button again.
●● Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
●● After you press the TUNER MEMORY button,
NUMBER disappears from the display and the
station is stored in memory.
5. To preset another station, repeat steps 2 to 4.
●● To tune in to a preset station, press the
TUNING UP, DOWN button.
●● To
listen to the radio, you must connect the
supplied FM antenna.
Using Bluetooth
Operating the Radio with the Remote
Control
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
1. Press the FUNCTION button to select FM.
2. Tune to the desired station.
●● Preset Tuning 1 : Press the 5 button to
select PRESET, and then press the TUNING
UP, DOWN button to select a preset station.
-- Before you can tune to preset stations, you
must add preset stations to the product's
memory.
●● Manual Tuning : Press the 5 button to select
MANUAL, and then press the TUNING UP,
DOWN button to tune in to a lower or higher
frequency.
●● Automatic Tuning : Press the 5 button to
select MANUAL, and then press and hold the
TUNING UP, DOWN button to automatically
search the band.
Setting Mono/Stereo
Press the MO/ST button.
●● Each time you press the button, the sound
switches between STEREO and MONO.
●● In a poor reception area, select MONO for a clear,
interference-free broadcast.
What is Bluetooth?
Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other
easily using a short, wireless connection.
●● A Bluetooth device may hum or malfunction:
-- When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Home Theater.
-- When it is subject to electrical variation from
obstructions caused by a wall, corner, or office
partitioning.
-- When it is exposed to electrical interference
from same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
●● Pair the Home Theater with the Bluetooth device
while the two are close together.
●● The further the distance is between the Home
Theater and the Bluetooth device, the worse the
quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
●● In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
30 - English
●● The
Home Theater has an effective reception
range of up to 32.8 feet in all directions if
there are no obstacles. The connection will be
automatically cut off if the device is out of this
range. Even within this range, the sound quality
may be degraded by obstacles such as walls or
doors.
●● This wireless device may cause electrical
interference. during its operation.
To Connect the Home Theater to a Bluetooth
Device
functionality will differ, depending on the
specifications of the connected device.
✎✎ Connect only to a Bluetooth device that
supports the A2DP Profile.
✎✎ Only one Bluetooth device can be paired at a
time.
✎✎ The search or connection functions may not
work properly in the following cases:
-- If there a strong electric field near or around
the home theater.
-- If several Bluetooth devices are simultaneously
paired with product.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
-- Note that such devices as microwave ovens,
wireless LAN adapters, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, and can cause electric
interference.
✎✎ For the good compatibility of Bluetooth or any
Bluetooth device
Before you begin, confirm that the Bluetooth device
supports the Bluetooth compliant stereo headset
function.
1. Press the FUNCTION button on the remote
control to display the BT message.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. For instructions,
refer to the Bluetooth device's manual.
3. Select the Stereo headset menu on the
Bluetooth device.
●● You will see a list of devices.
other devices like Mobile Phone, we recommend
you update the device's lastest version.
To Disconnect the Bluetooth Device from the
Home Theater
You can disconnect the Bluetooth device from
the Home Theater. For instructions, refer to the
Bluetooth device's manual.
●● When the Home Theater is disconnected from the
Bluetooth device, the Home Theater will display
DISCONNECTED on the front display.
To Disconnect the Home Theater from the
4. Select "[HTS]HXXXXX" from the searched list.
●● When the Home Theater is connected to the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of home theater will appear on the
front display of home theater.
Bluetooth Device
5. Play music on the connected device.
●● You can listen to the music playing on the
connected Bluetooth device over the Home
Theater system.
Press the (
) button on the front panel of the
Home Theater to switch from BT to another mode or
turn off the Home Theater.
●● Except when you disconnect the Home Theater
by changing functions, the connected Bluetooth
device will wait a certain time for a response
from the Home Theater before terminating the
connection. (Disconnection time may differ,
depending on the Bluetooth device.)
✎✎ The Home Theater only supports Middle
✎✎ In Bluetooth connection mode, the Bluetooth
Quality SBC data (up to [email protected]),
and does not support High Quality SBC data
([email protected]).
connection will be lost if the distance between
the Home Theater System and the Bluetooth
device exceeds 32.8 feet. When the Bluetooth
device comes back into effective range or you
restart the Bluetooth device, you have to pair the
device and home theater again to reconnect.
31 - English
Playing Content
Connect
✎✎ The AVRCP feature is supported. It's
Playing Content
✎✎ In Bluetooth mode, the screen saver will start
if the Bluetooth device stays in the Ready state
for 5 minutes. To reconnect the Bluetooth
device, turn off the screen saver, and then
connect the device. To turn off the screen
saver, press any button on the remote control
(the Volume button, a number button, etc.)
4. Press the TV SOUND button again to turn
TV SOUND off.
●● When TV SOUND is off, TV audio outputs
through the speakers of the connected
Anynet+ TV.
ĞĞ
Using the Bluetooth Power On
1)When you want to listen to the TV's audio
through the home theater speakers.
2)When you want to listen to the audio from
a USB device plugged into the TV through
the home theater speakers.
When the home theater is turned off, connecting
your smart device to the product via a Bluetooth
connection can turn the home theater on.
✎✎ Quick Start function is available when AC
Power Cord is connected to AC Source.
ĞĞ
✎✎ To use this function, set Settings > System >
Quick Start to On.
✎✎ To use this function, Bluetooth connection
between the Home theater and your smart
device should have been established before.
In other words, the Home theater should
be found from the list of known Bluetooth
devices of your smart device.
1. Connect your smart device to the product
via Bluetooth. (For information on Bluetooth
connections, refer to your smart device’s manual.)
Use TV SOUND:
TV SOUND ON/OFF support specifications:
Anynet+
(HDMI-CEC)
Setting
ON
2. Once connected, the home theater will turn
itself on automatically in BT mode.
●● Select the desired music to play on your smart
device.
OFF
No
Operation
Using the Special Effects Remote
Control Buttons
TV SOUND
DSP/EQ
If you have a TV that supports Anynet+ (HDMICEC), the TV SOUND button lets you direct the
TV's audio to the Home Theater Speakers or the
TV Speakers. To use, follow these steps:
zz
TV SOUND
1. Connect an HDMI cable to the TV and home
theater. (See page 12)
2. Set Anynet+ (HDMI-CEC) On in the home
theater and TV.
3. Press the TV SOUND button on the remote
control. TV SOUND ON flashes on the display
on the front panel, and then changes to D. IN.
●● When TV SOUND is on, TV audio outputs
through the Home Theater speakers.
DSP/EQ
TV Sound ON
TV Sound OFF
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Mute
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
TV Speaker
Output
TV SOUND
DSP/EQ
You can enjoy various sound mode.
DSPOFF : Select for normal listening.
zz CINEMA : Reproduces realistic and powerful
sound for movie sources.
zz MUSIC : Suitable for whole music sources.
zz GAME : Suited for playing video games and
produces powerful sound.
zz M-STEREO (Multi Stereo) : Produces surround
sound for 2 channel input sources.
zz POWER BASS : Reinforce bass sound effect.
zz LOUD : Improves bass sound characteristics
according to output level.
zz NIGHT : Optimizes to night by compress
dynamic range (soft sound).
32 - English
Network Services
Using BD-LIVE™
3. On your home theater, select Change Device.
1. Connect the product to the network.
(See page 13)
5. Select the kind of file you want to view or play,
Photos, Videos, or Music and then press v.
4. Use the ▲▼ button to select your PC in the
Device List.
2. Configure the network settings.
(See pages 19~21)
Once the product is connected to your network, you
can enjoy various movie-related service contents
available on BD-LIVE compliant discs.
1. Attach a USB memory stick to the USB jack on
the front of the product, and then use BD Data
Management to check its remaining memory.
The memory device must have at least 1GB
of free space to accommodate the BD-LIVE
services.
2. Select Settings on the Home screen, and then
press the v button.
4. Select BD Data Management, and then press
the v button.
5. Select Change Device, and then press the v
button.
6. Select USB DISK, and then press the v button.
7. Insert a Blu-ray Disc that supports BD-LIVE.
8. Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
✎✎ The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
Using DLNA
DLNA lets you access and play files located on your
PC through your home theater.
Follow the directions in the DLNA user's guide to set
up DLNA on your PC and to tag folders and files you
want to share with the home theater.
To access and play files located on your PC after you
have setup DLNA, follow these steps:
1. Turn on your PC, your TV, and the home
theater.
2. Make sure the DLNA Shared server is running
on your PC.
7. Select the file you want to view or play, and
then press v.
✎✎ You can create Playlists from files on your PC
in the same way you create playlists from files
on USB devices and discs.
✎✎ With a few exceptions, you can control the
playback of files on your PC in the same
fashion you control the playback of files on
USB devices and discs.
✎✎ You can also access files on your PC by first
selecting Photos, Videos, or Music on the
Home screen, and then selecting your PC from
the device list that appears.
Apps
Your home theater offers an extensive collection
of news, movies, weather, and other content you
can download directly to and enjoy on your home
theater. First, check the network and make sure the
home theater is connected to the Internet. Your
home theater must be connected to the Internet to
use the Apps feature.
The apps offered through the Apps feature work
much like their on-line versions or, if different, are
easy to use.
The apps require you to create accounts before you
can use them. Although you can create an account
at most of these sites through your home theater, it
is easier and quicker to create an account by visiting
the sites on line using a PC, laptop, or tablet with
Internet access. Note that in some cases, you will
need to use the home theater and a PC, laptop, or
tablet to establish an account. The main difference
between the regular on-line versions and the
versions you can access through your home theater
is that with the home theater versions, you use your
remote to enter letters and numbers as opposed to a
keyboard.
33 - English
Network Services
3. Select System, and then press the v button.
6. Use the ▲▼◀▶ button to select the folder
with the kind of files you selected, and then
press v. The File List is displayed.
Network Services
Using Apps
Using Opera TV Store
The first time you access any one of the apps, the
home theater displays two agreements. You must
accept both agreements to download and use any
apps.
By default, the home theater displays four popular
apps on the Home screen. You can view more apps
and change the apps the home theater displays on
the Home screen by selecting the More button.
To start an app, highlight the app, double click it,
and then follow the directions displayed on the
screen.
At the Opera TV Store, you will find high-quality
Internet video streaming, social network, and music
streaming services.
Accessing Opera TV Store
To access Opera TV Store, select the Opera TV Store
button on the Home screen, and then press the v
button.
To exit the Opera TV Store screen, press the EXIT or
RETURN button on your remote.
Viewing Additional Apps
Navigating in Opera TV Store
1. Select the More button on the Home screen,
and then press the v button. The More Apps
screen appears displaying a bank of apps.
When the Opera TV Store screen appears, it displays
a bank of assorted apps. Use the ▲▼◀▶ buttons on
your remote to move the highlight from app to app.
2. To view additional apps, move the highlight
to the right or left until another group of apps
appears.
Selecting an App
3. To exit the More Apps screen, select Close or
press the RETURN button or EXIT button on
your remote.
Changing the Apps Displayed on the Home
Screen
1. Select the More button, and then press the v
button.
2. Select the Edit button on the More Apps screen,
and then press the v button.
3. Apps that the home theater displays on the
Home page are marked with a check. Deselect
apps you want to remove from the Home
screen by highlighting each app, and then
pressing the v button.
Move the highlight to the app you want, and then
press the v button.
In the pop-up that appears, select OPEN to open the
app immediately or ADD TO MY APPS to add the
app to My Apps. Press the RETURN button on your
remote to go back to the Opera TV Store screen.
Selecting Apps by Category
To make searching for apps easier, you can view apps
by categories such as Popular, Watch, Listen, Play,
etc.
To select a category, use the ▲ button on your
remote to move the highlight to the top of the
screen.
Then, use the◀▶ buttons to select a category.
Using the My Apps Screen
4. Select apps by highlighting each app, and then
pressing the v button. A check mark appears
on each app you select. You can have up to
four apps selected at a time.
To access the My Apps screen, highlight MY APPS,
and then press the v button. The My Apps screen
appears displaying all the apps you have saved with
the My Apps designation.
5. When done, select OK, and then press the v
button. The Home screen re-appears.
Deleting Apps from My Apps
✎✎ To exit an application, press the EXIT button
on your remote.
✎✎ To delete the login information for all Apps,
press the 5 button for 5 seconds or more.
1. Highlight the MENU button on the top of the
My Apps screen, and then press the v button
on your remote.
2. Select REMOVE APPS in the menu, and then
press the v button. A red rectangle appears
around one of the apps.
3. Move the rectangle to the app you want to
delete, and then press the v button.
34 - English
4. Repeat this process to delete additional apps.
●● Bluetooth
5. When finished, select DONE, and then press
the v button.
6. Press the RETURN button to go back to the
Main screen.
transmissions can interfere with
the Screen Mirroring signal. Before using
the Screen Mirroring function, we strongly
recommend that you turn off the Bluetooth
function on your smart phone or smart
device.
Searching for Apps
1. Select SEARCH at the top of the screen, and
then press the v button.
2. To search quickly for popular items, click one
of the popular search tabs at the top of the
screen.
Screen Mirroring
Screen Mirroring lets you display the screen of a
smart phone or other compatible device on the TV
screen using Miracast™ technology. Manual Screen
Mirroring does not require a cable or a wireless
router.
1. From the Home screen, use the ◀▶ buttons to
select Screen Mirroring, and then press v.
2. Launch AllShare Cast on your smart phone or
device.
3. On your device, find the name of the home
theater system in the list of available devices,
and then select it.
4. The TV displays a connecting message (for
example, Connecting to Android_92gb...) and
then displays the connected message.
5. In a few moments, the screen of your device
appears on the TV screen.
●● When you are using the Screen Mirroring
function, video stuttering or audio dropouts
may occur, depending on your environment.
●● The Home Theater can connect to devices
that support AllShare Cast. Note that all
devices that have AllShare Cast may not
be fully supported, depending on the
manufacturer. For further information on
mobile connection support, refer to the
manufacturer’s web site.
35 - English
Network Services
3. To search for an app by name, enter the app
name using the onscreen keyboard. Opera TV
Store will search as you type and display apps
with names that match the letters you enter.
●● To cancel a current search, press the RETURN
button on your remote or select BACK on the
screen, and then press v.
Appendix
Additional Information
Digital Output
●● Be
Notes
Connections
HDMI OUT
●● Certain
HDMI output resolutions may not work,
depending on your TV.
●● You must have an HDMI connection to enjoy
videos with 3D technology.
●● A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Color to Off in the menu.
Settings
3D Settings
●● For
some 3D discs, to stop a movie during 3D
playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once. The
Blu-ray menu appears. Press the 5 button again,
then select 3D Settings in the Blu-ray menu.
●● Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
●● Depending
on the disc type, some aspect ratios
may not be available.
●● If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
●● If you select 16:9 Original, your TV may display 4:3
Pillarbox (black bars on the sides of the picture).
BD Wise (Samsung Products only)
●● When
BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
●● If the product is connected to a device that does
not support BD Wise, you cannot use the BD Wise
function.
●● For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
sure to select the correct Digital Output or you
will hear no sound or just loud noise.
●● If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
●● Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
●● Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
●● This Digital Output setup does not affect the
analog (L/R) audio or HDMI audio output to your
TV. It affects the optical and HDMI audio output
when your product is connected to an AV receiver.
●● If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
●● Digital Output can be activated when Speaker
Selection is set to TV Speaker.
BD-Live Internet Connection
●● The
Internet connection may be restricted while
you are using BD-LIVE contents.
Anynet+ (HDMI-CEC)
●● Depending
on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
●● This function is not available if the HDMI cable
does not support CEC.
●● If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
●● In
the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
●● Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster
read/write speeds.
●● The Resume Play function may not work after you
format the storage device.
●● The total memory available to BD Data
Management may differ, depending on conditions.
Speaker Settings
●● When
Speaker Selection is set to TV Speaker, audio
is produced by the TV speakers.
36 - English
Playing Content
HDMI audio
●● When
HDMI audio is output to the TV speakers, it
is automatically down-mixed to 2 channels.
Audio Return Channel
●● When
Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
●● Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility
problem.
●● The ARC function is only available if an ARCcompliant TV is connected.
Using the TOOLS button while playing pictures
●● If
the home theater is connected to a BD Wise
compliant TV that has BD Wise On, the Picture
Settings menu will not appear.
●● The Background Music function will not work
unless the music file and the photo file are located
on the same storage media. Also, sound quality
can be impacted by the bitrate of the MP3 music
file, the size of the photos, and the encoding
method.
Disk and Format Compatibility
Playback
Playing Video files
●● Video
files with high bitrates of 20Mbps or more
strain the product’s capabilities and may stop
playing during playback.
Disc types and content your Product can
Play
Media
Selecting the Audio Language
Blu-ray Disc BD-ROM or BD-RE/-R disc
recorded in the BD-RE
3D Blu-ray Disc format.
●● The
DVD-VIDEO,
DVD-RW,
DVD-R,
DVD+RW,
DVD+R
DVD-VIDEO, recorded
DVD+RW/DVD-RW(V)/
DVD-R/+R discs that
have been recorded and
finalized, or a USB storage
media containing MKV,
MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CDRW/-R, DVD-RW/-R, BDRE/-R discs or a USB
storage media containing
MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CDRW/-R, DVD-RW/-R, BDRE/-R discs or a USB
storage media containing
JPEG contents.
VIDEO
Selecting the Subtitle Language
on the Blu-ray Disc / DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the DISC MENU button.
●● This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
●● Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
●● This function changes both the primary and
secondary subtitles at the same time.
●● The total number of primary and secondary
subtitles, respectively, is displayed.
●● Depending
Playing JPEG files
●● You
can’t enlarge the subtitle and PG graphics in
the full screen mode.
Details
✎✎ The product may not play certain CD-RW/-R and
DVD-R because of the disc type or recording
conditions.
✎✎ If a DVD-RW/-R disc has not been recorded
properly in DVD video format, it will not be
playable.
✎✎ Your product will not play content that has been
recorded on a DVD-R at a bitrate that exceeds 10
Mbps.
37 - English
Appendix
◀▶ indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
●● The languages available through the Audio
Language function depend on the languages that
are encoded on the disc. This function or certain
languages may not be available.
●● Some Blu-ray Discs may allow you to select either
the PCM or Dolby Digital audio English soundtrack.
Disc Type
Appendix
✎✎ Your product will not play content that has been
recorded on a BD-R or USB device at a bitrate that
exceeds 30 Mbps.
✎✎ Playback may not work for some types of discs, or
when you use specific operations, such as angle
change and aspect ratio adjustment. Information
about the discs is written in detail on the disc box.
Please refer to this if necessary.
✎✎ When you play a BD-J title, loading may take longer
than a normal title or some functions may perform
slowly.
Logos of Discs the Product can Play
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
Dolby
DTS
Java
Disc Types your Product cannot Play
●● HD
DVD
●● DVD-ROM/PD/MV-Disc,
etc
●● DVD-RW(VR mode)
●● CVD/CD-ROM/CDV/CDG/CD-I/LD
(CD-Gs play audio only,
not graphics.)
●● DVD-RAM
●● Super
Audio CD
(except CD layer)
●● 3.9 GB DVD-R Disc for
Authoring.
✎✎ This product may not respond to all operating
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the
product.
✎✎ Samsung cannot guarantee that this product
will play every disc bearing the Blu-ray Disc,
DVD, or CD logo because disc formats evolve,
and problems and errors may occur during the
creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
✎✎ Please contact the SAMSUNG Customer Care
Center at 1-800-726-7864 if you have questions
or encounter difficulty when playing Blu-ray Discs,
DVD, or CD discs in this product. Also, refer to the
rest of this user manual for additional information
on playback restrictions.
✎
✎ Some commercial discs and DVD discs purchased
outside your region may not play on this product.
NTSC broadcast system in
U.S.A, Canada, Korea, Japan
Region Code
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play.
The Region Number for this product is displayed on the
rear panel of the product.
Disc Type
Blu-ray
Disc
38 - English
Region
Code
Area
a
North America, Central
America, South America, Korea,
Japan, Taiwan, Hong Kong and
South East Asia.
b
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
c
India, China, Russia, Central
and South Asia.
DVDVIDEO
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
North Korea, Mongolia
6
China
does not correspond to the Region number of
this product, the product cannot play the disc.
AVCHD (Advanced Video Codec High
Definition)
●● This
product can play back AVCHD format discs. These
discs are normally recorded and used in camcorders.
●● The AVCHD format is a high definition digital video
camera format.
●● The MPEG-4 AVC/H.264 format compresses images
with greater efficiency than the conventional image
compressing format.
●● Some AVCHD discs use the "x.v.Color" format. This
product can play back AVCHD discs that use the
"x.v.Color" format.
●● "x.v.Color" is a trademark of Sony Corporation.
●● "AVCHD" and the AVCHD logo are trademarks of
Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
depending on the recording conditions.
✎✎ AVCHD format discs need to be finalized.
✎✎ "x.v.Color" offers a wider color range than normal
DVD camcorder discs.
✎✎ Some MKV and MP4 format discs may not play,
depending on their video resolution and frame
rate.
Supported Formats
Notes on the USB connection
●● Your
product supports USB storage media, MP3
players, digital cameras, and USB card readers.
●● The product does not support folder or file names
longer than 128 characters.
●● Some USB/digital camera devices may not be
compatible with the product.
●● Your product supports the FAT 16, FAT 32, and NTFS
file systems.
●● Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
compatibility problems.
●● Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
●● The product does not support the PTP (Peer to Peer)
protocol.
●● Do not disconnect a USB device while it is transferring
or recording data.
●● The bigger the image resolution, the longer the image
takes to display.
●● This product cannot play MP3 files with DRM (Digital
Rights Management) downloaded from commercial
sites.
●● Your product only supports video that is under 30fps
(frames per second).
●● Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
●● Certain USB HDD Devices, multi-card readers and
thumb drives may not be compatible with this
product.
●● If some USB devices require excessive power, they may
be limited by the circuit safety device.
●● If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
●● SAMSUNG is not responsible for any data file damage
or data loss.
39 - English
Appendix
✎✎ If the Region number of a Blu-ray Disc/DVD
✎✎ Some AVCHD format discs may not play,
Appendix
Video File Support
File Extension
Container
Video Codec
Audio Codec
*.avi
AVI
MP4v3
H.264 BP/MP/HP
MP3, Dolby Digital, DTS,
WMA, PCM
Resolution
*.mkv
MKV
VC-1 AP
H.264 BP/MP/HP
MP3, Dolby Digital, DTS
*.wmv
WMV
(wmv9)
VC-1 AP
VC-1 SM
WMA
*.mp4
MP4
MP4 (mp4v)
H.264 BP/MP/HP
AAC
*.mpg /
*.mpeg
PS
MPEG1
MPEG2
H.264 BP/MP/HP
MP1, 2
Dolby Digital, DTS
1920x1080
`` Limitations
-----
Even when a file is encoded by a supported codec listed above, the file might not play if its content has a problem.
Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
Files having a higher bitrate/frame rate than standard may stutter during sound/video playback.
The Seek (skip) function is not available if the file’s index table is damaged.
`` Video decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
`` Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bitrate: 320kbps
Music File Support
File Extension
Container
Audio Codec
Support Range
*.mp3
MP3
MP3
-
*.wma
WMA
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bitrates - All bitrates from 5kbps to 384kbps
Picture File Support
File Extension
Type
*.jpg / *.jpeg / *.jpe
JPEG
*.png
PNG
40 - English
Resolution
15360x8640
Digital Output Selections
Setup
Bitstream
(Unprocessed)
PCM
Connection
Audio
Stream on
Blu-ray Disc
Definition
for Blu-ray
Disc
■■ If
HDMI supported AV receiver
PCM
Up to PCM 7.1ch
PCM
Dolby Digital
Up to PCM 5.1ch
Dolby Digital
Dolby Digital
Plus
Up to PCM 5.1ch
Dolby Digital Plus
Dolby TrueHD
Up to PCM 5.1ch
Dolby TrueHD
DTS
Up to PCM 5.1ch
DTS
DTS-HD High
Resolution
Audio
Up to PCM 5.1ch
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
Up to PCM 5.1ch
DTS-HD Master
Audio
PCM
PCM 2ch
Dolby Digital
DTS
Any
Bitstream
(Re-encoded
Dolby D)
DTS re-encoded
Re-encoded
Dolby Digital *
PCM 2ch
PCM 2ch
PCM 2ch
Up to PCM 5.1ch
Dolby Digital
Dolby Digital
Dolby Digital
Up to PCM 5.1ch
DTS
DTS
DTS
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects.
Outputs only the
main feature audio
stream so that your
AV receiver can
decode the audio
bitstream.
You will not hear
BONUSVIEW audio
or Navigation
Sound Effects.
Decodes the
main feature
Decodes the main
audio and
feature audio and
BONUSVIEW
BONUSVIEW audio
audio stream
stream together
together into
into PCM audio and PCM audio and
adds Navigation
adds Navigation
Sound Effects, then Sound Effects,
re-encodes the
then re-encodes
PCM audio into DTS the PCM audio
bitstream.
into Dolby
Digital bitstream
or PCM.
the Source Stream is 2ch or mono, "Re-encoded Dolby D" Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-- Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may sound.
Navigation Sound Effects are different on each Blu-ray Disc.
41 - English
Appendix
Audio
Stream on
DVD
Bitstream
(Re-encoded DTS)
Appendix
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
Output
Blu-ray Disc
E-contents/
Digital contents
HDMI Mode
Resolution of Blu-ray
Disc
[email protected]
480i
Setup
BD Wise
DVD playback
HDMI Mode
Auto
Max. Resolution of TV input
[email protected]
[email protected]
Max. Resolution of TV input
-
1080p
-
1080p
Movie Frame : Auto (24Fs)
[email protected]
-
1080i
1080i
1080i
720p
720p
720p
480p
480p
480p
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is not
listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact
Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).
Symptom
You cannot eject the disc.
Check/Remedy
●● Is
the power cord plugged securely into the outlet?
off the power, and then turn it back on.
●● Turn
Playback does not start.
●● Check
the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
●● CD-ROMs and DVD-ROMs cannot be played on this product.
●● Make sure that the rating level is correct.
Playback does not start
immediately when you press
the 6/7 button.
●● Are
No sound.
●● The
you using a deformed disc or a disc with scratches on the surface?
the disc clean.
●● Wipe
home theater does not play sound during fast playback, slow playback,
and step motion playback.
●● Are
●● Is
You can only hear sound
from a few speakers, but not
all 6.
the speakers connected properly? Is the speaker setup correctly customized?
the disc severely damaged?
●● On
certain Blu-ray/DVD discs, sound is output from the front speakers only.
if the speakers are connected properly.
●● Adjust the volume.
●● When playing audio from a CD, the radio, or a TV, the unit outputs sound to the
front speakers only.
●● Check
42 - English
Symptom
Check/Remedy
Dolby Digital 5.1 CH
Surround Sound is not
produced.
●● Is
there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Sound is produced only if the disc is recorded with 5.1 channel sound.
●● Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
The remote control does not
work.
●● Are
●● The
disc is rotating but
there is no picture.
●● Picture quality is poor and
the picture is shaking.
●● Is
Audio language and subtitles
do not work.
●● The
The menu screen does not
appear even when you select
the menu function.
●● Are
The aspect ratio cannot be
changed.
●● You
●● The
product is not
working.
(Example: The power goes
off or you hear a strange
noise.)
●● The Product is not
working normally.
●● Press
You have forgotten the
rating level password.
●● With
Can't receive radio
broadcasts.
●● Is
There is no sound when
you try to listen to TV audio
through the home theater
speakers.
●● If
"Not Available" appears on
screen.
●● The
you operating the remote within its operational range and within the proper
angle relative to the sensor?
●● Are the batteries drained?
●● Have you selected the mode (TV/BD) functions of the remote control (TV or BD)
correctly?
the TV power on?
the video cables connected properly?
●● Is the disc dirty or damaged?
●● A poorly manufactured disc may not be playable.
●● Are
Audio Language and subtitle functions will not work if the disc does not
contain multiple language sound tracks or subtitles.
you using a disc that does not contain menus?
and hold the remote control's 5 button for 5 seconds in STANDBY mode.
This will reset the unit.
-- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
no disc in the product, press and hold the product's 5 button for longer
than 5 seconds. INIT appears on the display and all settings will return to their
default values.
-- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
the antenna connected properly?
the antenna's input signal is weak, install an external FM antenna in an area
with good reception.
●● If
you press the ^ button while listening to TV audio using the D. IN or AUX
functions, the Blu-ray/DVD disc functions are turned on and the TV audio is
muted.
features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
43 - English
Appendix
can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode,
or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only.
Refer to the Blu-ray Disc jacket, and then select the appropriate function.
Appendix
Symptom
Check/Remedy
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
●● Press
and hold the 5 button on front panel for more than 5 seconds with no
disc in the product. All settings will revert to their factory settings.
No HDMI output.
●● Check
●● Check
Abnormal HDMI output
appears on the screen.
the connection between the TV and the HDMI jack of the product.
if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
●● If
random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
DLNA function
You can see folders shared
through DLNA, but cannot
see the files.
●● DLNA
shows only Photo, Music, and Movie files. It does not display other kinds
of files.
Video plays intermittently.
●● Check
if the network is stable.
if the network cable is properly connected and if the network is
overloaded.
●● Check
The DLNA connection
between the TV and PC is
unstable.
●● IP
addresses under the same subnetwork should be unique, otherwise IP collision
can cause an unstable connection.
●● Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
The home theater cannot
connect to the BD-LIVE
server.
●● Test
whether the network connection is active by using the Network Status
function.
●● Check whether a USB memory device is connected to the product.
●● The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 36)
●● See if the BD-Live Internet Connection option is set to Allow(All).
●● If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
●● The
USB memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 36)
✎✎ When the factory default settings are restored, all stored user BD data is deleted.
Repairs
If you contact us to repair your product, an administration fee may be charged if either:
1.
An engineer is called out to your home at your request and there is no defect in the product.
2.
You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or begin any work on
your product.
We recommend you read this manually thoroughly, search for a solution on line at www.samsung.
com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your product.
44 - English
Specifications
Power Requirements
General
FM Tuner
HDMI
Amplifier
AC 110-120V ~ 50/60Hz
Power Consumption
47 W
Weight
4.19 Ibs
Dimensions
16.9 (W) x 2.1 (H) x 8.8 (D) inches
Operating Temperature Range
+41°F to +95°F
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
1.0 %
Video
1080p, 1080i, 720p, 480p
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2 (3Ω)
Center speaker output
170W (3Ω)
Surround speaker output
165W x 2 (3Ω)
Subwoofer speaker output
170W (3Ω)
Analog input : 20Hz~20kHz (±3dB)
Frequency response
Digital input : 20Hz~40kHz (±4dB)
70dB
Channel separation
60dB
Input sensitivity
(AUX) 500mV
Speaker (5.1ch speaker system)
Speaker
system
Impedance
Frequency range
Output sound Rated Maximum
pressure level input
input
Front
Surround
Center
3Ω
Subwoofer
200Hz ~ 20kHz
165W
Dimensions
(W x H x D) (inches)
Weights
(Ibs)
3.7 x 5.8 x 2.9
0.96
330W
84dB/W/M
50Hz ~ 200Hz
170W
340W
3.7 x 4.6 x 2.9
0.88
8.9 x 3.7 x 2.9
1.24
6.7 x 13.8 x 11.3
7.52
✎✎ Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
✎✎ Weight and dimensions are approximate.
✎✎ Design and specifications are subject to change without prior notice.
✎✎ Dispose of unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877)
278 - 0799
ĞĞ
SWA-6000
Operating Temperature
Range
+41°F to +95°F
50 W
Operating Humidity
Range
10% ~ 75%
Weight
2.52 lbs
Output
165W x 2 CH
Dimensions (W x H x D)
3.0 x 9.0 x 6.0 inches
Frequency range
20Hz~20KHz
S/N Ratio
65dB
Power Requirements
AC 120V ~60Hz
Power Consumption
45 - English
Appendix
S/N Ratio
Appendix
Licenses
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, DTSHD, the Symbol, & DTS and the Symbol together
are registered trademarks, and DTS-HD Master Audio | Essential is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks
of their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA."
This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret
protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 20042010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
- Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu.
46 - English
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton
to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in
the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and
service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized
service center. Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during the limited warranty period specified above. All
replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement
parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand
name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if
provided, are on an "AS IS" basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except
to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not
apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation;
applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage
or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment,
systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors
not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect
electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,
cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book;
product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal
transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO
WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG
BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY
BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized
Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED
FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE
PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/
authorized_resellers.html.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
IN THE US
1-800-SAMSUNG
(726-7864)
www.samsung.com/us/
support
Samsung Electronics America, Inc. 85
Challenger Road Ridgefield Park, NJ
07660
© 2014 Samsung Electronics Co., Ltd. All rights reserved.
AH68-02673A-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement