BUTTON CONTROLS CAUTION PACKAGE CONTENTS User manual

BUTTON CONTROLS CAUTION PACKAGE CONTENTS User manual
CAUTION
PACKAGE CONTENTS
1
BUTTON CONTROLS
2
Standby:
Long press to Turn ON and Turn OFF the unite
Volume increase:
● Short press to increase the volume
● Under Bluetooth and TF card mode, long press entering
next song.
Pairing, Play/Plause:
● Under Bluetooth mode(without TF card in W4),
long press entering pairing mode.
● Long press to switch Bluetooth and TF card mode,when the
TF card inserted
● Under Bluetooth and TF card mode, short press to
pause/play music
Volume decrease:
● Short press to decrease the volume
● Under Bluetooth and TF card mode, long press entering
previous song.
Bluetooth mode
W4
User manual
● Turn on the unit, W4 will automatically search the Bluetooth
device. If the device paired before, W4 will connect automatically. If can’t find paired device, W4 will enter pairing mode
automatically,.
● Active “Bluetooth” function on your device and search for “Fenda
W4”.
● Enter “0000” if your device asks for the PIN code.
3
Charging:
The unit has built in a rechargeable battery inside, before play the
speaker, please follow up below step to charge the unit first.
1. Using the supplied USB cable to connect the MicroUSB jack,
and another terminal connect with USB power like PC or other
universal USB power.
2. During the charging, the red color LED indicator will turn on,
and it will be off when the unit is fully charged.
TF Card
Specifications
Power Output:3W
Frequency Response:80Hz-20KHz
Power Input:5V 500mA
Separation:≥40dB
S/N Ratio:≥75dB
Product dimension:W48 x D48 x H51mm
Micro USB
4
1.Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
2.NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for
help.
3.This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
4.The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
SHENZHEN FENDA TECHNOLOGY CO., LTD.
ADD:Fenda Hi-Tech Park, Zhoushi Road, Shiyan,
Baoan, Shenzhen, China
Tel:+86-755-27353888 (800 Line)
Fax: +86-755-27353777
P.C:518108
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising