measure and control - Samson Corporation

measure and control - Samson Corporation
MEASURE AND CONTROL
grease control guns
non-metered Grease control handles
05
Grease control guns
Steel and aluminum high pressure control gun with ergonomic grip. Maximum working pressure:
7140 psi. Inlet thread: 1/4”NPTF, outlet thread: 1/8” NPTF
413 080
Model 413 077 - Grease control gun
Grease control gun with rigid stem and 3 jaw connector (1124). 1/4”NPTF inlet.
Model 413 080 - Grease control gun
Grease control gun with rigid stem, 3 jaw connector (1124) and Z swivel (1105).
Model 413 081 - Grease control gun
Grease control gun with double steel braid reinforced rubber hose (140050) and 3 jaw connector
(1124).
Model 413 082 - Grease control gun
Grease control gun with double steel braid reinforced rubber hose (140050), 3 jaw connector (1124)
and Z swivel (1105).
In line grease meter
Model 411 103 - In line grease meter
High pressure oval gear meter with digital display. Batch displays in ounces (up to 9999 oz) and
permanent totalizer in pounds (up to 999999 lb). Batch display reset button. The meter can be easily
calibrated in the field for maximum accuracy.
Works with two 1.5 V AAA alkaline batteries. Maximum pressure: 7140 psi (500 bar). Maximum flow
range: up to 4.4 lb/min (2 Kg/min). Precision: ± 3,0 %. Inlet outlet connections: 1/8” NPTF.
digital-metered grease control handle
Model 1177 - High pressure digitally metered grease control handle
A grease control handle fitted with a high pressure in-line meter, model 411 103. This digital meter
allows for better accuracy in greasing applications. Included is a double steel braid reinforced hose with
a 3-jaw hydraulic connector, and Z-swivel, model 1105, with 1/4” NPTF inlet.
32
Product specifications are subject to change without prior notice.
MEASURE AND CONTROL
grease control handle accessories
Grease control gun swivels
05
To handle grease hoses easily even at high pressure. For best results, use a straight swivel between
the pump and distribution hose and a Z swivel between the hose and grease control gun. Maximum
working pressure: 7000 psi (500 bar).
Model 1109 - Straight grease swivel. 1/4” NPTM x 1/4” NPTF
Model 1105 - “Z” grease swivel. 1/4” NPTM x 1/4” NPTF
1105
1108
Model 1104 - “Z” grease swivel. 1/4” NPTM x 1/2” x 27 M
Model 1108 - “Straight” grease swivel. 1/4” NPTM x 1/2” x 27 M
Model 414 200 - “L” grease swivel. 1/4” x 1/4” NPTF
double STEEL BRAID GREASE OUTLET HOSES
Double steel braid safety rubber hoses for use with air operated greasing equipment. Maximum
working pressure: 7000 psi (500 bar). 1/8” NPTM threads.
Model 142 020 - Steel braid outlet hose with 3 jaw connector. 10” long.
Model 142 030 - Steel braid outlet hose with 3 jaw connector. 12” long.
Model 142 040 - Steel braid outlet hose with 3 jaw connector. 16” long.
Model 142 050 - Steel braid outlet hose with 3 jaw connector. 18” long.
Model 142 200 - Steel braid outlet hose with 3 jaw connector. 80” long.
Model 140 020 - Steel braid outlet hose. 10” long.
Model 140 030 - Steel braid outlet hose. 12” long.
Model 140 040 - Steel braid outlet hose. 16” long.
Model 140 050 - Steel braid outlet hose. 18” long.
Model 140 200 - Steel braid outlet hose. 80” long.
HIGH PRESSURE GREASE CONNECTORS.
For use with air operated pumps or hand greasing units on hydraulic type nipples (DIN 71412).
Connector head, contact surface and jaws manufactured in hardened steel. Maximum working
pressure: 7000 psi (500 bar). Connection thread: 1/8” NPTF.
121 000
1124
Model 1124 - 3 jaw high pressure grease connector.
Model 121 000 - 3 jaw high pressure narrow connector.
Rigid Grease Outlets
High-pressure grease outlet stems for use in air-powered greasing applications.
1122
Model 1122 - Angled pipe outlet with 1124 coupler 1/8” NPTM
Model 1120 - Angled pipe outlet 1/8” NPTM x 1/8” NPTM
Product specifications are subject to change without prior notice.
33
MEASURE AND CONTROL
non-metered control handles & oil bars
standard volume non-metered oil control handles
05
Aluminum body, non-metered oil control gun with ergonomically-designed handle. Buna-N rubber
valve with progressive operation for comfortable operation even using 10:1 pumps. All guns include a
ball bearing inlet swivel and conical fluid inlet screen. Maximum working pressure: 1500 psi (105 bar).
Maximum delivery: 6.6 gpm (25 l/min). Fluid inlet thread: 1/2” NPSM (F).
Model No.ApplicationOutlet type nozzle type
1130
1130
Gear oil
110º rigid swiveling
Manual
1132
None; handle w/ swivel only
None
1134
ATF (transmission fluid)Straight flexible
Manual
1171
Oils
60º Angle rigidSemi automatic
1173
All types of lubricants
Flexi hose w/ 90º swivel stem Manual
medium volume non-metered oil control handle
Model 363 088 - Medium flow non-metered oil control handle
Aluminum body, non-metered oil control gun with ergonomically-designed handle. Buna-N rubber
valve with progressive operation for comfortable operation even using 10:1 pumps. All guns include a ball
bearing inlet swivel and are fitted with a high flow rigid outlet and semi-automatic non drip nozzle (1189).
Maximum working pressure: 1500 psi (105 bar). Maximum delivery: 8 gpm (25 l/min). Fluid inlet
thread: 1/2” NPSM (F).
High volume non-metered control handles
1192
Model 1192 - High flow non-metered oil control handle
High flow, non-metered oil control gun manufactured in aluminum. With double valve mechanism
that allows small flow deliveries when the trigger is partially pressed and full flow delivery when the
trigger is totally pressed. Lockable trigger and ball bearing inlet swivel. The handle includes a 60º
angled rigid outlet with semiautomatic non drip nozzle (1189). Maximum working pressure: 1500 psi
(105 bar). Maximum delivery: up to 11.7 gpm (45 l/min). Fluid inlet thread: 3/4”NPSM (F).
186 300
Model 186 300 - High flow non-metered control handle for fluids
Control gun with composite body and stainless steel valve mechanism for use with fluids like
windshield washer, glycol solution and other water based fluids. Includes inlet swivel and flexible
outlet with 90º stem. Maximum working pressure: 570 psi (40 bar). Maximum flow: 4 gpm (15 l/min).
Inlet threads 1/2” NPSM (F).
Oil bars & accessories
Model OB-1 - One tap oil dispensing bar
Model OB-2 - Two tap oil dispensing bar
Model OB-3 - Three tap oil dispensing bar
Model OB-4 - Four tap oil dispensing bar
Model 361 110 - Outlet kit to add a tap to existing bars
Model 366 550 - In-line digital meter kit for oil bars
Model 949 001 - Hose connector kit. Includes 2’ connection hose, 1/2” NPTMBE swivel, and 1/2”
NPTFBE medium pressure ball valve
34
Product specifications are subject to change without prior notice.
MEASURE AND CONTROL
05
digital-metered control handles
standard volume digital meter control handles
Oval gear hose end meter with digital display for measured delivery of lubricants up to SAE 140.
Meter is powered by two easily replaceable AAA 1.5 V alkaline batteries. This meter has a resettable
batch display in quarts, a resettable totalizer in gallons and a permanent totalizer in gallons. Meters
are factory calibrated but for maximum accuracy they can easily be calibrated in the field. The meter
is flange coupled to a durable but lightweight oil control gun that incorporates a rugged ball bearing inlet
swivel with an inlet filter. All hose end meters are supplied with a protective rubber shroud.
Maximum working pressure: 1500 psi (105 bar). Oil flow range: 1.3 to 5.25 gpm (5 to 20 l/min). Fluid
inlet thread: 1/2” NPSM (F).
model No.ApplicationOutlet type
2162
Nozzle type
2159
No outlet; handle w/ meter and swivel only None
2161
Motor oil
60º angle rigidSemi automatic
2162
All lubricants Flex hose w/ 90º swivel stem
Manual
2165
ATF/OilsStraight flexible
Manual
2163
Gear oil
110º angle rigid swiveling
Manual
medium volume digital meter control handle
Model 365 088 - Medium flow digitally-metered control handle
365 088
Oval gear digital meter for measured delivery of lubricants up to SAE 140. Meter is powered by two easily
replaceable AAA 1.5 V alkaline batteries. This meter has a resettable batch display in quarts, a resettable
totalizer in gallons, and a permanent totalizer in gallons. Meters are factory calibrated but for maximum
accuracy they can easily be field-calibrated.
Maximum working pressure: 1500 psi (105 bar). Oil flow range: 8 gpm. Fluid inlet thread: 1/2” NPSM (F).
Includes a 2159 metered control handle with a high-flow 60º angle rigid outlet, non-drip tip (1189),
protective shroud and 1/2” NPSM (F) threads.
High volume digital meter control handles
365 652
Model 365 652 - High flow digitally-metered control handle
Oval gear hose end meter with digital display for measured delivery of lubricants up to SAE 140.
Meter is powered by two easily replaceable AAA 1.5 V alkaline batteries. This meter has a resettable
batch display in quarts, a resettable totalizer in gallons, and a permanent totalizer in gallons. Meters
are factory calibrated but for maximum accuracy they can easily be calibrated in the field. The meter
is coupled to a high delivery oil control gun that incorporates a rugged ball bearing inlet swivel
with an inlet filter and 60º rigid outlet with semi automatic non drip nozzle. All hose end meters are
supplied with a protective rubber shroud.
Maximum working pressure: 1500 psi (105 bar). Maximum flow range: up to 6.5 gpm (25 l/min). Fluid
inlet thread: 3/4” NPSM (F).
Model 1193 - Highest flow digitally-metered control handle (not shown)
Model 2122 high flow 3/4” NPTF digital meter replaces standard model 2100 digital meter.
Digital meter control handle for water base fluids
Model 365 675 - Digital-metered control handle for fluids
Oval gear hose end meter with digital display for measured delivery of fluids such as windshield
washer, glycol solution and other water based fluids. Meter is powered by two easily replaceable
AAA 1.5 V alkaline batteries. The meter has two separate displays in quarts, a resettable 4 digit batch
display and a permanent totalizer in gallons. Meters are factory calibrated but for maximum accuracy
they can easily be calibrated in the field. The in-line meter is coupled to a fluid control handle, model
186300.
Maximum working pressure: 570 psi (40 bar). Flow range: 5 to 1.3 to 4 gpm (15l /min). Fluid inlet
thread: 1/2” NPSM (F).
Product specifications are subject to change without prior notice.
35
MEASURE AND CONTROL
05
odometer style mechanical control handles
standard volume mechanical oil control handles
1546
Oval gear meter with mechanical, odometer style display for use with lubricants up to SAE 140. Partial
reading up to 999.9 quarts and non-resettable totalizer registers in gallons. Meters are factory calibrated
for maximum accuracy and include protective rubber shroud. The meter is flange coupled to a durable
but lightweight oil control gun that incorporates a rugged ball bearing inlet swivel with filter.
Maximum working pressure: 1000 psi (70 bar). Oil flow range: 0.26 to 7.1 gpm (1 to 27 l/min). Fluid inlet
and outlet threads: 1/2” NPSM (F).
Models
Part NoApplicationOutlet type
Nozzle typeunit
1168
LP WaterRigid angled w/ hook
None
1540
None; handle w/ meter and swivel only
None
1541
None; handle w/ meter and swivel only
None
1544
ATF/OilsStraight flexible
Manual
1545
ATF/OilsStraight flexible
Manual
1546
All lubricants Flex hose w/ 90º swivel stem
Manual
1547
All lubricants Flex hose w/ 90º swivel stem
Manual
1548
Motor Oil
60º angle rigidSemi automatic
1549
Motor Oil
60º angle rigidSemi automatic
36
Product specifications are subject to change without prior notice.
None
qts/gals
liters
qts/gals
liters
qts/gals
liters
qts/gals
liters
MEASURE AND CONTROL
in line meters
in-line oil meter-odometer style mechanical
05
Oval gear meter with mechanical, odometer style display for use with lubricants up to SAE 140.
Partial reading up to 999.9 quarts and non-resettable totalizer registers in gallons. Meters are factory
calibrated for maximum accuracy and include protective rubber shroud.
Maximum working pressure: 1000 psi (70 bar). Oil flow range: 0.26 to 7.1 gpm (1 to 27 l/min). Fluid
inlet and outlet threads: 1/2” NPSM (F).
Model 1500 - Oval gear in-line meter with mechanical register – quarts / US gallons.
Model 1501 - Oval gear in-line meter with mechanical register – litres.
in-line oil meter-digital
Model 2100 - Digital in-line oil meter
Oval gear meter with digital display. For use with lubricants up to SAE 140. Meter is powered by two
easily replaceable AAA 1.5 V alkaline batteries. This meter has a resettable batch display in quarts,
a resettable totalizer in gallons, and a permanent totalizer in gallons. Meters are factory calibrated
but for maximum accuracy they can easily be calibrated in the field. Meter can count in liters, quarts,
pints or gallons.
Maximum working pressure: 1500 psi (105 bar). Oil flow range: 1.3 to 5.25 gpm (5 to 20 l/min). Fluid
inlet and outlet threads: 1/2” NPSM (F).
High flow in line meters: Oils, diesel & glycol-based fluids
366 725
Oval gear in line meters with digital display. The meter has two separate displays in quarts, a
resettable 4 digit batch display and a 6 digit permanent totalizer in gallons. Meters are factory
calibrated but for maximum accuracy they can easily be calibrated in the field.
Meters are compatible with lubricants up to SAE 140, diesel and glycol solutions.
Model 366 725 - High flow in line meter - 13.2 gpm
Works with two AAA alkaline batteries.
Maximum working pressure: 1000 psi (70 bar)
Maximum working temperature: 140º F (60º C)
Flow range: minimum flow rate 1.45 gpm (5.5 l/min); maximum flow rate 13.2 gpm (50 l/min)
Accuracy: +/- 0.5 %
Pressure drop: 7 psi (0.5 bar)
Inlet and outlet threads: 1/2” NPSM (F)
366 726
Model 366 726 - High flow in line meter - 26.4 gpm
2122
Works with two AAA alkaline batteries.
Maximum working pressure: 430 psi (30 bar)
Maximum working temperature: 140º F (60º C)
Flow range: minimum flow rate 2.5 gpm (9.5 l/min); maximum flow rate 26.4 gpm (100 l/min)
Accuracy: +/- 0.5 %
Pressure drop: 7 psi (0.5 bar)
Inlet and outlet threads: 1” NPSM (F)
Model 2122 - High flow in line meter - 20 gpm
3/4”, 1500 psi. Meters in pints, quarts, liters or gallons. Rated to 1500 psi. 3/4” NPTF inlet and outlet
threads. Runs on 2 N (1/2 AA) batteries.
Model 2124 - High flow in line meter - 30 gpm
2124
1”, 1500 psi. Meters in pints, quarts, liters or gallons. Rated to 1500 psi. 1” NPTF inlet and outlet
threads. Runs on 2 N (1/2 AA) batteries.
Product specifications are subject to change without prior notice.
37
MEASURE AND CONTROL
oil control handles
pre-set oil control handle
05
Model 2199 - Heavy duty preset digital meter
Electronic oval gear digital preset meter with 60º rigid outlet pipe, semi automatic nozzle and 1/2”
NPTF screened inlet. Can be programmed to dispense in quarts, liters, pints, and gallons. A 5-digit
LED shows accuracy to a hundredth of a gallon. Uses 4 replaceable AA batteries. Pre-calibrated at
the factory, it is also easily field-calibrated if necessary. Can handle engine oil, gear oils up to SAE
140, antifreeze solution and hydraulic fluids.
Maximum working pressure: 1000 psi. Maximum flow rate: 8 gpm. Preset up to 99.9 units. Not
suitable for outdoor use.
Traditional Mechanical Oil Meters
Traditional Mechanical Pistol Grip Series
This family consists of a count-up meter and a preset batch meter, both with mechanical dials. These
meters are extremely durable for both indoor and outdoor applications. Fluid inlet: 1/2” NPSM (F);
outlet: 1/2” NPTF. Flow rate up to 4 gpm. Includes model 1129 swivel. Rated to 1000 psi.
Manual versions with locking trigger:
1148
Model 1147:
Model 1148:
Model 1149:
Model 1150:
8 Pint dial oil meter with pint totalizer, 1131 Gear Oil rigid outlet included.
16 Quart dial oil meter with gallon totalizer, 1141 Oil rigid outlet included.
16 Quart dial oil meter with gallon totalizer, 1135 ATF flex hose included.
16 Liter dial oil meter with liter totalizer, 1141 oil rigid outlet included.
Pre-set Mechanical Versions:
Model 1152:
Model 1153:
Model 1154:
Model 1155:
60 Quart dial meter with gallon totalizer, 1141 oil rigid outlet included.
60 Gallon dial meter with gallon totalizer, 1141 oil rigid outlet included.
16 Quart dial meter with gallon totalizer, 1141 oil rigid outlet included.
60 Liter dial meter with liter totalizer, 1141 oil rigid outlet included.
Traditional Mechanical Inline Meters
Oscillating piston design for rugged dependability; for use with SAE 5 to 140 oils or glycol solutions.
1/2” NPTF inlet/outlet, 1000 psi max.
Model 1196:
Model 1197:
Model 1198:
Model 1199:
38
8 Pint dial, totalizes in pints. For use with oils only.
16 Quart dial, totalizes in gallons. For use with oils only.
16 Liter dial, totalizes in liters. For use with oils only.
16 Gallon dial totalizes in gallons. For antifreeze applications.
Product specifications are subject to change without prior notice.
MEASURE AND CONTROL
05
control handle accessories
control handle accessories
1131
control handle outlets
Outlets for 1500 and 2100 Series Digital Meters
model No.ApplicationOutlet typenozzle type
1135
1128 / 1126
1139
1131
Gear oil
1135
ATF (transmission fluid)Straight flexible 1126
All types of lubricants
Flexible with swiveling 90º stemSemi automatic
1128
All types of lubricants
Flexible with swiveling 90º stem
1139
Motor oil
60º rigidSemi automatic
1141
Motor oilStaight rigid, Nozzle typeSemi automatic
110º rigid swiveling Manual
Manual
Manual
Outlet for all high-volume flow control handles
model No.ApplicationOutlet typenozzle type
1189
Lubricants, high delivery
60º rigidSemi automatic
1138
Non drip nozzles
1137
Model 1138Semiautomatic non drip nozzle.
Model 1137
369 205
Manual non drip nozzle
Model 736 522Semiautomatic high flow non drip nozzle for high volume outlet.
For use with 365 652, 366 888, 1192 and 1193 high delivery hose end meters.
Model 369 205
90º angled adapter for use with manual operated non drip nozzles.
Swivels
1127
Model 1123
Model 1127
Model 1129
3/4” NPTF oil inlet swivel for aluminum high-flow handle.
For use with 365 652, 366 888, 1192 and 1193 high delivery hose end meters.
1/2” NPTF oil inlet swivel for use in 1500 and 2100 series handles.
For use with Samson hose end meters.
1/2” NPTF oil inlet swivel for use with model 2199 preset meter.
For use with preset meters and other standard 1/2” inlet meters.
Product specifications are subject to change without prior notice.
39
MEASURE AND CONTROL
INVENTORY MANAGEMENT CONSOLE (IMC)
05
This powerful console is designed for the shop that wants simple control of their fluids. The IMC offers ease of operation, great
value, and several features not previously available in this category of control console. This category of console works with a pulser
at the pump and solenoid control at the dispense point allowing only one dispense point per product to be operated. Samson’s
unique IMC is the perfect field replacement for this type of competitive console.
Standard Features
• Controls one or two products
• Inventory management on a declining balance
❍❍ Allows initial inventory to be entered
❍❍ Deducts each dispense
❍❍ Manager enters each delivery
❍❍ Alerts when inventory level is low
• When controlling two products, allows
simultaneous dispense of both products
• Controls one to ten dispense points
• Allows one air outlet to be controlled so that air
is only available during service operating hours
• Maximum quantity for preset dispense: 999 quarts
• Maximum quantity for free flow dispense: 999 quarts
• Maximum number of users: 200
• Two operation levels
❍❍ User: able to only order a dispense
❍❍ Manager: able to set inventory levels and
perform management functions
• Three languages: English, Spanish, French
• Allows selection of US measurement (quarts) or metric
(liters) measurement
• Key fob reader for use with optional key fob
optional features
• PC interface with USB or Serial Port and IMS
software
❍❍ Displays tank inventory levels
❍❍ When inventory level is low, alerts vendor
via email
• External printer
• Allows connection of a two channel level sensor
for used fluids; sounds alarm when tank is full
• Optional key fob for activation instead of PIN
system packages
381192 One product: one dispense point console for
stand alone use with one pulser and one
dispense point kit
381193 Two product: two dispense point console for
stand alone use with two pulsers and two
dispense point kits
381194 One product: one dispense point console with PC
interface, software & USB cable with one pulser
and one dispense point kit
381195 Two product: two dispense point console with
PC interface, software & USB cable with two
pulsers and two dispense point kits
Individual Components
381190 Console for stand alone use
381191 Console with PC interface, software & USB cable
380201External printer
Replacement for competitive console
•
•
•
•
•
40
Drop in replacement in most instances
Works with most pulsers
In most instances, uses same pulser wire
Works with AC or DC solenoids
In most instances, uses same solenoid wire
381400 Single channel alarm for used fluid tank
381401 Two channel alarm for used fluid tank
381158 Flashing red light for remote alert
381161 Dispense point kit: includes solenoid, filter,
ready light and connection swivels in one
convenient box
Product specifications are subject to change without prior notice.
MEASURE AND CONTROL
05
INVENTORY MANAGEMENT CONSOLE (imc)
IMC wiring diagram
0
FLOAT
100
WASTE 2
0
V12
OR
M5
FLOAT
100
M4
WASTE 1
0
M3
100
M2
FRESH 2
0
100
M1
FRESH 1
V1
V2
V3
V4
V5
V6
V7
V8
V9
V10
DISPENSE POINT SOLENOIDS + READY LIGHTS
M6
V12
V11
AIR COMPRESSOR
METER
M3, M5, M6:
SOLENOID
FLOAT
SWITCH
High level alarms that sound an alarm on the console and display alarm in window of console
M6: High level alarm that sounds an alarm on the console, displays alarm in window of console, and sends
current to V12 for controlling an air solenoid on evacuation pump
V11: Programmable timer for controlling air supply to pumps
Product specifications are subject to change without prior notice.
41
MEASURE AND CONTROL
05
INVENTORY MANAGEMENT SYSTEM (ims)
IMS KEYPAD
Fluid management in today’s shops poses several
challenges. As the size of the shop increases,
properly dispensing and controlling fluids challenges
older systems and equipment. Additionally,
the increased cost of today’s lubricants and the
popularity of synthetics place a higher demand for
the proper accounting of lubricant usage.
Samson is proud to lead the industry with
our proven offering of inventory management
products. From the simplest entry level console to
sophisticated computerized management systems,
we can help address the proper management of
both new and used fluids.
A new concept:
The Advanced Monitoring System
The Advanced Monitoring System (AMS), the
software at the heart of our Inventory Management
System (IMS), has been installed in several
thousand facilities around the world. Based on
our experience in the design of systems for fluid
monitoring and the management of workshop
activities, we have brought true innovation to
an old concept. Through this experience and
innovation, we have created a system designed
to improve profitability through controlled fluid
distribution and work-order accountability.
The Inventory Management System’s ease
of integration allows you to design any size
installation using a minimum number of
components, even adaptable down to a singlepoint dispense system. The modular design of
the IMS makes it easy to install even the largest of
systems, including more than 100 fluid outlets. It
allows the integration of complementary functions,
such as remote displays, stock level detectors,
volumetric measuring probes, control access
points and the automatic scheduling of any “on/
off” function. This modular structure enables us to
focus on adapting the equipment for the specific
needs of each individual installation, reducing your
cost, while guaranteeing the possibility of future
evolution should new needs arise.
The IMS system can act as a stand alone system or be interfaced
with a computer in the shop. Keypad may be mounted in the
shop to provide technicians with access to dispense product or
the keypad may be mounted in the parts room. Keypads may be
activated by a PIN, an optional key fob, or an optional bar code
scanner. The President keypad contains the system software
module; one President keypad is required per system. Additional
keypads may be ordered as needed.
To order a networked system, choose a President keypad that
includes a PC interface. If a system is ordered to use in a stand
alone configuration, a PC interface may be added at any time.
An optional internal
thermal ticket printer
provides a printed
ticket with each
dispense transaction.
Fields included on the
ticket are date/time,
job number, product
supplied, volume
supplied, dispense
point, technician
name, vehicle number
(optional), vehicle
odometer (optional),
and the remaining
inventory of product.
When product reaches a
low level, ticket will have
warning printed on it.
The network technology utilized by the IMS is the
CANBUS network, which was originally developed to
manage all of the functions of an automobile through
one single cable. This technology gives the system
a unique simplicity of installation, while offering the
highest accuracy and speed of communications.
CANBUS networks are used throughout industry,
whenever a highly reliable network is required.
42
Product specifications are subject to change without prior notice.
a
ATS
TRM
MEASURE AND CONTROL
INVENTORY MANAGEMENT SYSTEM (ims)
intelligent flow control unit (ifcu)
The IFCU is a dispense point controller located at
each dispense point and includes the solenoid,
pulser, filter, and display of product dispensed
for that point. The filter is readily accessible for
cleaning. The three digit large character super
bright LED display shows the dispense point
number when not in use and displays the quantity
dispensed during use. Three LED indicator lights
show the status of the dispense point.
05
Tank room Manager (TrM)
Provides real time precise inventory for each tank. Accepts
and measures new deliveries. IMS will allow up to four tank
room managers in network allowing inventory management
of sixteen tanks. When used with PC interface, the TRM
provides a real time view of exact inventory on parts room
computer. Allows emailing oil vendor when inventory level
reaches predetermined level.
alarm tech supervisor (ats)
Provides high level (or low level) management of any tank
and manages up to four inputs. Unit will sound alarm when
tank reaches programmed level; will also control air to
evacuation pump and can control a remote alarm such as a
flashing red light. Allows emailing used fluid hauler when
inventory level reaches predetermined level.
Access Control Terminal (ACT)
Provides access control to doors with electronic locks.
Requires key fob to activate, allows tracking of access to
locations such as the lube storage room, essential tool room,
or other secure areas. May also be used as a gate controller.
Dispense point control from 5 GPM for
car and light truck shops all the way to
30 GPM for heavy duty applications
Pulser & solenoid
ifcu
Keypad
act
NTPC
Product specifications are subject to change without prior notice.
43
MEASURE AND CONTROL
IMS SYSTEM PART NUMBERS
ims component part numbers
Keypads
381003 President keypad with PC interface (NTPC); and internal ticket printer
381005 President keypad with PC interface (NTPC); no internal ticket printer
381002 President keypad for stand alone use and internal ticket printer
381004 President keypad for stand alone use; no internal ticket printer
381000 Ims keypad without internal ticket printer
381001 Ims keypad with internal printer
Dispense point control
381501 IFCU for oil
381551 IFCU for water based products; 1/2” NPTF
381550 IFDM for custom applications; electronics only, needs pulser, solenoid, and filter
381502 IFDU for controlling motor fuel dispensers
381553 Pulser, solenoid, filter assembly for use with IFDM; 250 PSI, 3/4” NPTF, 20 GPM, 66.75 PPU
381554 Pulser, solenoid, filter assembly for use with IFDM; 250 PSI, 1” NPTF, 30 GPM, 66.75 PPU
381555 Pulser, solenoid, filter assembly for use with IFDM; 2000 PSI, 3/4” NPTF, 20 GPM, 66.75 PPU
381556 Pulser, solenoid, filter assembly for use with IFDM; 2000 PSI, 1” NPTF, 30 GPM, 66.75 PPU
381700 Remote Display Unit (RDU)
Tank room management
381153 Tank Room Manager (TRM) for use with ims; manages up to four tanks
381157 Tank Room Manager (TRM) for stand alone use; manages up to four tanks
381404 Tank probe; one per tank
381315 Access Control Terminal (ACT); requires pin or key fob to unlock door;
controls entry to tank room, essential tool room, or other secure area
381152 Alarm Tech Supervisor (ATS) for use with IMS; manages up to four tanks
381156 Alarm Tech Supervisor (ATS) for stand alone use; manages up to four tanks
381400 One channel sensor
381401 Two channel sensor
381158 Flashing red alarm light for remote location
Systems accessories
381901 Bar code scanner; connects to keypad for data entry
381102 Power supply; must be added to system when more than 8 dispense points per keypad
381905 Set of five key fobs for activating system in lieu of pin entry
381906 Box of 15 rolls of thermal paper for keypad printer
380201 External printer; must be within 100’ of a system keypad
381958 1000’ Spool of network cable
381999 One day of on-site technical assistance
381960 Serial to USB connector kit with software
44
Product specifications are subject to change without prior notice.
05
MEASURE AND CONTROL
pulsers, solenoids and accessories
pulse meters
05
Model 1071 - 100 PPU Oval Gear Pulse Meter
Oval gear pulse meter for oils and glycol solutions. 1/2” NPSM (F) inlet/outlet.
Model 600 601 - 328 PPU Pulse Meter for windshield washer solution
1061
Pulse meter manufactured in stainless steel with Viton seals for use with methanol
based WW solutions. 1/2” BSP (M) with 60º cone seal inlet/outlet. Max pressure 215 psi.
Model 1059 - 10 PPL Traditional Gallon Pulse Meter
Traditional Gallon pulse meter for oils and glycol solutions. 1/2” NPTF inlet/outlet. Replacement only
will not work properly with IMC or IMS systems.
Model 1061 - 10 PPQ Traditional Pulse Meter
Traditional pulse meter for oils and glycol solutions. 1/2” NPTF inlet/outlet
Model 1062 - 10 PPP Traditional Pint Pulse Meter
Traditional pulse meter for oils and glycol solutions. 1/2” NPTF inlet/outlet. Replacement only will not
work properly with IMC or IMS systems.
Model 1066 - 10 PPL Traditional Liter Pulse Meter
Traditional liter pulse meter for oils and glycol solutions. 1/2” NPTF inlet/outlet
solenoids
Model 1065 - 24 VAC/DC Oil Solenoid - Normally Closed (NC)
Medium pressure NC oil solenoid for use on AC or DC systems; internally rectified.
Equipped with a protective screen. 1/2” NPTF inlet/outlet. Max 3000 psi.
Model 1064 - 24 VAC Air/Water Solenoid - Normally Closed (NC)
1065
Low pressure brass bodied NC solenoid for use as an air solenoid or for water
based solutions like WW fluid or Coolant. 1/2” NPTF inlet/outlet. Max 300 psi.
Model 1074- 24 VDC Air/Water Solenoid - Normally Closed (NC)
Low pressure brass bodied NC solenoid for use as an air solenoid or for water
based solutions like WW fluid or Coolant 1/2” NPTF inlet/outlet. Max 300 psi.
Model 107 042 - 24 VAC Air/Water Solenoid - Normally Opened (NO)
Low pressure brass bodied NO solenoid for use as an air solenoid to control
waste oil pumps. 1/2” NPTF inlet/outlet. Max 300 psi.
other accessories
1069
Model 1069 - Y Strainer
1/2” NPTF cleanable screened filter for mounting upstream of oil solenoid. Rated to 250 psi.
Product specifications are subject to change without prior notice.
45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement