TP-LINK TL-PB15600 Ally Series 15600mAh High Capacity Power Bank Quick Installation Guide
Advertisement
Advertisement
More powerful
More reliable
Power Indicator
LED
Micro-USB Input
LED Flashlight
USB Output
Power Button
TL-PB15600
How to use?
In Charging the Power Bank (5V/2.4A)
Plug in the Power Bank to a wall charger or your computer's USB port via a USB charging cable.
Smart Charging other devices (Total: 5V/3A)
Plug in the USB charging cable to the Smart port to charge your device.
Checking the Battery status
Press the Power button to check the current battery level. We recommend to charge it when the last indicator LED is blinking.
Flashlight
Press the Power button for 3 seconds to turn on
(or off ) the LED flashlight.
Attention
Keep this device away from water, fire, and extreme temperatures.
Do not deliberately drop or impact this device.
Do not attempt to extrude or pierce this device, which may cause it to short circuit.
Do not attempt to disassemble, modify or repair this device yourself.
Do not use a damaged wall charger or USB charging cable to charge this device.
If the product appears to be bulging or any other visible abnormalities, stop using the product immediately and contact us or distributor.
Please recycle this device at an approved disposal location.
This product is not suitable for those lacking relevant knowledge and experience, please use under the supervision and guidance of professionals.
Please charge this device once every three months to avoid shortening its battery life.
Please use the recommended power adapter to charge this device. Power adapter is not provided by
TP-LINK.
If you have any questions related to this product, please refer to the support page at www.tp-link.com
TEL:+86 755 2650 4400
7106505796 REV1.0.0
©2015 TP-LINK

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Number of simultaneously connected devices (max): 2 White
- Charging source: DC
- 15600 mAh