Pneumatic Assembly Tools - Power Tools

Pneumatic Assembly Tools - Power Tools
Pneumatic Assembly Tools
Table of Contents
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Introduction . . . . . . . . . . . . . . . . . . . . . . . .
Clutch Selection Guide . . . . . . . . . . . . . .
Inline – Clutch . . . . . . . . . . . . . . . . . . . . . .
Pistol – Clutch . . . . . . . . . . . . . . . . . . . . . .
Pistol – Stall . . . . . . . . . . . . . . . . . . . . . . . .
Accessories . . . . . . . . . . . . . . . . . . . . . . .
Nomenclature . . . . . . . . . . . . . . . . . . . . . .
2-5
3
6-7
8-10
11
12-13
14
Angle Nutrunners . . . . . . . . . . . . . . . . . 15-23
Introduction . . . . . . . . . . . . . . . . . . . . . . . 15-17
Angle Nutrunners – Clutch . . . . . . . . . . . . 18-21
Angle Nutrunners – Stall . . . . . . . . . . . . . 22-23
Reaction Bar & Swingbar Nutrunners 24-27
Introduction . . . . . . . . . . . . . . . . . . . . . . . 24-25
Inline & Pistol Tools . . . . . . . . . . . . . . . . . . 26-27
Specialty Tools . . . . . . . . . . . . . . . . . . . . . 28-35
Flush Socket Nutrunners . . . . . . . . . . . . .
Crowfoot Nutrunners . . . . . . . . . . . . . . . .
Hold & Drive Nutrunners . . . . . . . . . . . . .
Tube Nut Wrenches . . . . . . . . . . . . . . . . .
28-29
30-31
32-33
34-35
Nutrunner Accessories . . . . . . . . . . . . . 36-39
General . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Torque Verifier . . . . . . . . . . . . . . . . . . . . . 37-39
Pulse Nutrunners . . . . . . . . . . . . . . . . . . . 40-45
Introduction . . . . . . . . . . . . . . . . . . . . . . . 40-41
Tools & Accessories . . . . . . . . . . . . . . . . . 42-45
Impact Wrenches . . . . . . . . . . . . . . . . . . . 46-49
Introduction . . . . . . . . . . . . . . . . . . . . . . . 46-47
Impact Wrenches . . . . . . . . . . . . . . . . . . . 48-49
General Accessories . . . . . . . . . . . . . . . . . 50-59
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Balancers . . . . . . . . . . . . . . . . . . . . . . . . . 51
Arms & Accessories . . . . . . . . . . . . . . . . . 52-55
Apex Fastener Tools . . . . . . . . . . . . . . . . .56-59
General Information . . . . . . . . . . . . . . . 60-68
Conversion Tables . . . . . . . . . . . . . . . . . .
Sales & Service Centers . . . . . . . . . . . . .
Warranty, Lubrication, Safety . . . . . . . . . .
Model Number Index . . . . . . . . . . . . . . . .
60
62
64
66-68
1
Screwdrivers
A tradition of quality
is built into every screwdriver.
Cleco screwdrivers have long been recognized
as the assembly tool standard against which all
other brands are measured. With over 100 years of
precision manufacturing experience built into each
tool, Cleco screwdrivers provide users the ultimate in
light and medium duty assembly tool performance.
Cleco’s long standing tradition of service to the
customer has led us to develop an extensive line of
screwdrivers with configurations to suit a broad range
of applications. Options including multiple reversing
methods, different clutch styles, numerous handle
alternatives, and a wide variety of accessories
provide the building blocks for tool configurations
designed to meet our customers’ unique assembly
application requirements.
The Cleco 2 series of inline Clecomatic screwdrivers
offer dependable repetitive torque accuracy from
.5 to 8 in.-lbs., ideal for miniature assemblies often
found in extra light-duty electronics assembly using
#0 to #5 screws.
In the light to medium duty assembly tool market, the
ergonomically designed Cleco 19 series screwdrivers,
with a torque range of 0.6 to 130 in.-lbs., are the
ultimate tools for an infinite range of applications
including electronics, automotive, aerospace,
appliance and general assembly.
With a torque range of 15 to 180 in.-lbs (1.7 to
2
60 MONTH WARRANTY
Cleco® 19 & 8 Series Clecomatic® Screwdrivers
Apex Tool Group warrants the 19 and 8 series Clecomatic
screwdrivers and parts to be free from defects in
workmanship and material of the life of the tool. The clutch
assemblies are warranted for SIXTY MONTHS against
failure or wear causing malfunction.
Apex Tool Group’s obligation under this warranty is to
repair or replace, without charge to the original purchaser,
any part which does not meet the warranty outlined above
during the active commercial production of this tool. This
tool is to be returned to the factory with carrying charges
prepaid.
This warranty shall not apply to any product that has been
fixture mounted or subjected to misuse, negligence or
accident; or in which parts not made or supplied by Apex
Tool Group shall have been used; or which shall have
been altered or repaired by other than Apex Tool Group
personnel in a manner which in the determination of Apex
Tool Group shall have affected its operation.
THIS WARRANTY CONSTITUTES THE ENTIRE
OBLIGATION OF THE COMPANY RELATING TO
THE SALE AND USE OF SUCH PRODUCT AND ITS
MAXIMUM LIABILITY IS LIMITED TO THE PURCHASE
PRICE OF SUCH PRODUCT. IN NO EVENT SHALL THE
COMPANY BE LIABLE FOR CONSEQUENTIAL, INDIRECT,
INCIDENTAL OR SPECIAL DAMAGES OF ANY NATURE
ARISING FROM THE SALE OF USE OF SUCH PRODUCT.
20Nm), the 8 & 88 series Cleco screwdrivers cover
the gamut of medium duty assembly applications
ranging from lawn and garden equipment to small
recreational vehicles, and even aerospace.
Capable of running down fasteners as large as 5/16
(M6), the Cleco 35 series screwdrivers are the true
workhorses of the medium to heavy-duty screw
assembly market.
Clutch Selection Guide
Choose the right tool to match your application.
Clecomatic® Clutch
When tightening a fastener, torque is transmitted through
the Clecomatic clutch to the fastener until the clutch can no
longer transmit the increasing torque. The clutch then “slips”,
which allows an internal mechanism to seal off air to the air
motor, shutting off the tool at the user-adjusted preset torque
level. This type of torque control allows maximum RPM from
the tool for increased productivity. Since the tool doesn’t dwell
on the fastener as with a stall tool, tool wear and fatigue to the
operator is reduced. The life of a Clecomatic tool is up to five
times longer than that of a lever-operated, ratcheting clutch
screwdriver.
New Clecomatic Clutch
®
Stall Type
The stall tool doesn’t use a clutch but rather the output
spindle is coupled to the last stage of gearing. Torque output
from a stall tool may be controlled within fairly reasonable
limits with an air pressure regulator. Stall type tools are also
trigger activated.
Stall Type
APPLICATION
CLUTCH SELECTION GUIDE FOR COMMON FASTENING APPLICATIONS
CLUTCH
TYPE
Clecomatic
®
Stall Drive
STANDARD BOLT & NUT
SHEET METAL SCREW
STANDARD BOLT & NUT
SELF-TAPPING SCREW
SELF-LOCKING NUT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
FAIR
FAIR
FAIR
Under certain conditions
GOOD
Under certain conditions
FAIR
Under certain conditions
Where seating torque
exceeds tapping torque
Under certain conditions
3
Cleco 19 Series
Accuracy. Durabi
Built by your expertise and our experience
Your productivity is our greatest influence. The development of the Cleco 19 Series is
driven by experts—you, the very people that have depended on Cleco
assembly products for over a century.
Whatever your application,
consider it done
We set out to design the most accurate, longest-lasting, most userfriendly screwdriver family on the market. Our widespread configurations
and applications ensure that you will find the ideal screwdriver or nutrunner.
Designed for the most demanding jobs
Continuously improving end-product quality is evermore critical. The Cleco 19 Series is engineered
for the most demanding fastening applications where accuracy, repeatability, and durability are held
to the strictest standard. Imagine what the Cleco 19 Series can do for you.
Adding value to your business
With a new powertrain design, the Cleco 19 Series tools have reached a new milestone in
performance and accuracy. This, combined with legendary Cleco reliability, means you will have
the sustained power to get it right the first time, every time.
Designed with the operator in mind
A soft-touch grip is integrated into the new handle design to provide superior protection from
temperature, chemicals, vibration, and slip. What’s more, Cleco 19 Series pistol tools offer two
interchangeable handle sizes to bring comfort to a wider array of operators. These features,
plus reduced weight and a balanced design, will raise productivity, tool flexibility, and reduce
maintenance costs.
4
ility. Productivity.
Completely re-engineered Clecomatic® clutch
delivers best-in-class accuracy, exceeding a
Cm of 2.0 with a tolerance of ±10%.
New design and advanced materials yield up to
19% weight reduction based on configuration,
at no loss of balance or durability.
19 Series Torque Capability
Adjustable reverse lever is located near the trigger
to offer true one-hand operation and adaptability
for left-or-right-handed users.
Easy-to-access torque verification port
is parallel to the main air line for
streamlined air management.
Two interchangeable grip sizes
adapt to the widest range of hands
and provide increased flexibility and
reduced operating cost.
Soft-touch grip is integrated
into the newly designed handle to
deliver superior protection against
temperature, chemicals, vibration,
and slippage. For the operator, this
means improved ergonomics
and reduced fatigue.
5
Inline Screwdrivers
2, 19, 8, 88, 35 Series Clecomatic Clutch
2 Series
Torque Range: .06 - .9 Nm
■
■
■
■
0.5 - 8 In. Lbs.
Push-to-start
Push button reverse
External torque adjustment
1/4” quick change chuck
2RSA-10SB
19 Series
Torque Range: 0.6 - 14.7 Nm 5 - 130 In. Lbs.
■ Push-to-start and Push & Lever start
■ External torque adjustment
■ Bit & Finder & 1/4” quick change chuck
19SPA05Q
8 Series
Torque Range: 1.7 - 8.5 Nm 15.0 - 75 In. Lbs.
■ Push button reverse and non-reversible
■ Push-to-start and Push & Lever start
■ Bit & Finder and Quick change
88 Series
19SCA05Q
Torque Range: 1.7 - 19 Nm 15 - 170 In. Lbs.
■ Push button reverse and non-reversible
■ Push-to-start and Push & Lever start
■ Quick change & 3/8” square drive
35 Series
88RSA-5CQ
Torque Range: 1.7 - 20 Nm 15 - 180 In. Lbs.
■ Quick change and square drive
■ Short stroke button reverse
■ External torque adjustment
(Quick change models)
8RSA-10BQ
35RSA-10-3
6
Torque Range
Tool Range
With Std. Spring
Model Number
Bit & Finder*
1/4” Quick Change
in.-lbs.
Free
Speed
Length*
Weight
Air Consumption
Min.
Hose
SCFM
I.D.
Nm
in.-lbs.
Nm
RPM
in.
mm
lbs.
kg
Air Inlet
NPT
0.6 - 2.1
0.6 - 2.9
1.1 - 4.5
1.1 - 5.1
1.1 - 5.1
0.5 - 8
0.5 - 8
5 - 19
5 - 19
10 - 38
10 - 38
10 - 38
.06 - 0.9
.06 - 0.9
0.6 - 2.1
0.6 - 2.1
1.1 - 4.3
1.1 - 4.3
1.1 - 4.3
1000
1000
2300
1600
920
560
220
7.6
6.4
9.1
9.3
9.1
9.5
9.5
194
162
230
235
230
240
240
0.5
0.5
1.4
1.4
1.3
1.5
1.5
0.20
0.20
0.63
0.64
0.61
0.67
0.68
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
6
6
11
11
11
11
11
0.6 - 2.1
0.6 - 2.9
1.1 - 4.5
1.1 - 5.1
1.1 - 5.1
5 - 19
5 - 19
10 - 38
10 - 38
10 - 38
0.6 - 2.1
0.6 - 2.1
1.1 - 4.3
1.1 - 4.3
1.1 - 4.3
2800
1900
1100
660
260
9.1
9.3
9.1
9.5
9.5
230
235
230
240
240
1.4
1.4
1.3
1.5
1.5
0.63
0.64
0.61
0.67
0.68
1/8”
1/8”
1/8”
1/8”
1/8”
3/16”
3/16”
3/16”
3/16”
3/16”
11
11
11
11
11
0.6 - 2.1
0.6 - 2.9
1.1 - 4.5
1.1 - 5.1
1.1 - 5.1
5 - 19
5 - 19
10 - 38
10 - 38
10 - 38
0.6 - 2.1
0.6 - 2.1
1.1 - 4.3
1.1 - 4.3
1.1 - 4.3
2800
1900
1100
660
260
9.8
10.0
9.8
10.2
10.2
249
254
249
259
259
1.5
1.5
1.5
1.6
1.6
0.69
0.70
0.66
0.73
0.74
1/8”
1/8”
1/8”
1/8”
1/8”
3/16”
3/16”
3/16”
3/16”
3/16”
11
11
11
11
11
Push-to-Start - Push Button Reverse
2RSA-10B
2RSA-10SB**
19BPA02Q
19BPA03Q
19BPA04Q
19BPA05Q
19BPA06Q
5 - 19
5 - 26
10 - 40
10 - 45
10 - 45
Push-to-Start - Collar Reverse
19SPA02B
19SPA03B
19SPA04B
19SPA05B
19SPA06B
19SPA02Q
19SPA03Q
19SPA04Q
19SPA05Q
19SPA06Q
5 - 19
5 - 26
10 - 40
10 - 45
10 - 45
Lever Push-to-Start - Collar Reverse
19SCA02B
19SCA03B
19SCA04B
19SCA05B
19SCA06B
19SCA02Q
19SCA03Q
19SCA04Q
19SCA05Q
19SCA06Q
5 - 19
5 - 26
10 - 40
10 - 45
10 - 45
*Add .63” (16mm) for bit & finder models
** Short housing
General:
90 psi (620kPa) required for maximum rated torque.
Model Number
Bit & Finder
1/4” Hex
Quick Change
3/8” Square
Drive
Standard Equipment:
Operating instructions & service manual.
Suspension bail.
All torque springs required to meet indicated torque.
Lever Push-to-Start models include kit to convert to
lever only. (301409)
Torque Range
Free
Speed
in.-lbs.
Nm
RPM
15 - 65
15 - 75
15 - 75
15 - 95
15 - 160
1.7 - 7.3
1.7 - 8.5
1.7 - 8.5
1.7 - 10
1.7 - 18
15 - 100
15 - 170
Optional Equipment:
Additional accessories: Pages 12-13
Bits & finders: Page 12
Non-Reverse Kit: 207030
Torque Signal Kit: 301106 (lever only)
Overhose: 207019
Length*
Air Consumption
Weight
lbs.
kg
Air Inlet Min. Hose SCFM
NPT
I.D.
in.
mm
800
550
400
550
400
9.6
9.6
9.6
9.5
9.5
260
260
260
241
241
2.4
2.4
2.4
2.6
2.6
1.1
1.1
1.1
1.2
1.2
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
19
19
19
19
19
1.7 - 11
1.7 - 19
650
500
9.1
9.1
232
232
2.5
2.5
1.1
1.1
1/4”
1/4”
1/4”
1/4”
19
19
1.7 - 6.8
1.7 - 18
800
400
11.3
11.1
302
282
2.9
3.1
1.3
1.4
1/4”
1/4”
1/4”
1/4”
19
19
1.7 - 7
1.7 - 12
1.7 - 18
1.7 - 20
1250
620
410
300
9.6
10.4
10.4
10.4
244
264
264
264
2.5
2.8
2.8
2.8
1.1
1.2
1.2
1.2
1/4”
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
5/16”
24
24
24
24
Push-to-Start - Push Button Reverse
8RSA-10
8RSA-10BQ
8RSA-7BQ
8RSA-5BQ
88RSA-7CQ
88RSA-5CQ
88RSA-7C-3
88RSA-5C-3
Push-to-Start - Non-Reversible
88SA-7CQ
88SA-5CQ
88SA-5C-3
Push and Lever Start - Push Button Reverse
8RSAL-10BQ
88RSAL-5CQ
88RSAL-5C-3
15 - 60
15 - 160
Inline - Push-to-Start - Push Button Reverse
35RSA-20Q
35RSA-10Q
35RSA-7Q
35RSA-5Q
35RSA-10-3
35RSA-5-3
*Add .63” (16mm) for bit & finder models
General:
90 psi (620kPa) required for maximum rated torque.
Length and weight of finder type tools includes
standard length bit & finder.
Weight does not include dead handle.
15 - 60
15 - 110
15 - 160
15 - 180
Standard Equipment:
Operating instructions & service manual
Suspension bail
Dead handle on models above 100 in.lbs. torque cap.
All torque springs required to meet indicated torque
Standard Equipment if Specified:
One bit, finder, and finder spring (bit & finder models)
Grip Sleeve (202346; Push-to-Start models only)
Dead handle (861006)
Optional Equipment:
Additional accessories: Pages 12-13
Bits & finders: Page12
Torque Springs: Page 13
7
Pistol Grip Screwdrivers
19 Series Clecomatic Clutch
19 Series
Torque Range: 0.6-14.7 Nm 5.0-130 In. Lbs.
■ Class-leading accuracy and repeatability
■ Adjustable reverse lever for true one-hand –
left-handed or right-handed – operation
■ External torque adjustment
■ 1/4” hex quick change drive
■ “P” and “T” style handles
■ 2 interchangeable soft-touch grip sizes
■ Streamlined torque signal ports
■ Trigger and Push & Trigger start
The renowned Clecomatic® clutch is
re-engineered to provide class-leading
accuracy/repeatability and improve the
already legendary durability.
The “T” handle is best for applications that
are pre-threaded and the grip on the tool
is required to simply guide the tool as the
fastener is being tightened.
19TTA02Q
“T” Handle
19PTA05Q
“P” Handle
The “P” handle is best suited
for thread cutting fasteners
where force must be exerted
against the ergonomically
shaped “P” handle during
the process.
8
Model Number
1/4” Quick Change
Torque Range
Tool Range
With Std. Spring
in.-lbs.
Nm
in.-lbs.
Nm
Free
Speed
Length
Air Consumption
Weight
in.
mm
lbs.
kg
Air Inlet
NPT
2800
1900
1100
660
260
660
470
8.0
8.2
8.0
8.4
8.4
8.4
9.3
202
207
202
212
212
212
235
1.44
1.54
1.54
1.54
1.54
1.54
1.73
0.7
0.7
0.7
0.7
0.7
0.7
0.8
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
11
11
11
11
11
11
11
2800
1900
1100
660
260
660
470
260
7.9
8.1
7.9
8.3
8.3
8.3
9.3
9.6
199
204
199
210
210
210
235
243
1.44
1.54
1.54
1.54
1.54
1.54
1.73
1.94
0.7
0.7
0.7
0.7
0.7
0.7
0.8
0.9
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
11
11
11
11
11
11
11
11
RPM
Min. Hose
I.D.
SCFM
Push and Trigger Start - T Handle - Clecomatic Clutch
19TCA02Q
19TCA03Q
19TCA04Q
19TCA05Q
19TCA06Q
19TCA07Q
19TCA09Q
5 - 19
5 - 26
10 - 40
10 - 45
10 - 45
15 - 60
15 - 79
0.6 - 2.1
0.6 - 2.9
1.1 - 4.5
1.1 - 5.1
1.1 - 5.1
1.7 - 6.8
1.7 - 8.9
5 - 19
5 - 19
10 - 38
10 - 38
10 - 38
24 - 60
24 - 60
0.6 - 2.1
0.6 - 2.1
1.1 - 4.3
1.1 - 4.3
1.1 - 4.3
2.7 - 6.8
2.7 - 8.9
Trigger Start - T Handle - Clecomatic Clutch
19TTA02Q
19TTA03Q
19TTA04Q
19TTA05Q
19TTA06Q
19TTA07Q
19TTA09Q
19TTA15Q
5 - 19
5 - 26
10 - 40
10 - 45
10 - 45
15 - 60
15 - 79
45 - 130
0.6 - 2.1
0.6 - 2.9
1.1 - 4.5
1.1 - 5.1
1.1 - 5.1
1.7 - 6.8
1.7 - 8.9
5.1 - 14.7
5 - 19
5 - 19
10 - 38
10 - 38
10 - 38
24 - 60
24 - 79
45 - 130
General:
Tool performance rated at 90 psi (620kPa) air pressure.
Standard Equipment:
Operating instructions & service manual
Suspension bail
Model Number
1/4” Quick Change
0.6 - 2.1
0.6 - 2.1
1.1 - 4.3
1.1 - 4.3
1.1 - 4.3
2.7 - 6.8
2.7 - 8.9
5.1 - 14.7
Dead handle on models above 100 in.-lbs. torque cap.
All torque springs required to meet
indicated torque specification
Optional Equipment:
Additional accessories: Pages 12-13
Torque Range
Tool Range
With Std. Spring
in.-lbs.
Nm
in.-lbs.
Nm
Free
Speed
Torque Springs: Page 13
Torque Signal Kit: 302021PT
(Trigger w/Clecomatic clutch only)
Overhose: 207107
Push-only Conversion Kit: 301121
Length
Air Consumption
Weight
in.
mm
lbs.
kg
Air Inlet
NPT
2800
1900
1100
660
260
660
470
8.1
8.3
8.1
8.5
8.5
8.5
9.8
206
211
206
216
216
216
248
1.41
1.51
1.41
1.51
1.51
1.51
1.65
0.6
0.7
0.6
0.7
0.7
0.7
0.7
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
11
11
11
11
11
11
11
2800
1900
1100
660
260
660
470
260
8.0
8.2
8.0
8.4
8.4
8.4
9.8
9.7
204
209
204
214
214
214
248
247
1.41
1.51
1.41
1.51
1.51
1.51
1.65
1.91
0.6
0.7
0.6
0.7
0.7
0.7
0.7
0.9
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
11
11
11
11
11
11
11
11
RPM
Min. Hose
I.D.
SCFM
Push and Trigger Start - P Handle - Clecomatic Clutch
19PCA02Q
19PCA03Q
19PCA04Q
19PCA05Q
19PCA06Q
19PCA07Q
19PCA09Q
5 - 19
5 - 26
10 - 40
10 - 45
10 - 45
15 - 60
15 - 79
0.6 - 2.1
0.6 - 2.9
1.1 - 4.5
1.1 - 5.1
1.1 - 5.1
1.7 - 6.8
1.7 - 8.9
5 - 19
5 - 19
10 - 38
10 - 38
10 - 38
24 - 60
24 - 60
0.6 - 2.1
0.6 - 2.1
1.1 - 4.3
1.1 - 4.3
1.1 - 4.3
2.7 - 6.8
2.7 - 8.9
Trigger Start - P Handle - Clecomatic Clutch
19PTA02Q
19PTA03Q
19PTA04Q
19PTA05Q
19PTA06Q
19PTA07Q
19PTA09Q
19PTA15Q
5 - 19
5 - 26
10 - 40
10 - 45
10 - 45
15 - 60
15 - 79
45 - 130
0.6 - 2.1
0.6 - 2.9
1.1 - 4.5
1.1 - 5.1
1.1 - 5.1
1.7 - 6.8
1.7 - 8.9
5.1 - 14.7
5 - 19
5 - 19
10 - 38
10 - 38
10 - 38
24 - 60
24 - 79
45 - 130
General:
Tool performance rated at 90 psi (620kPa) air pressure.
Standard Equipment:
Operating instructions & service manual
Suspension bail
0.6 - 2.1
0.6 - 2.1
1.1 - 4.3
1.1 - 4.3
1.1 - 4.3
2.7 - 6.8
2.7 - 8.9
5.1 - 14.7
Dead handle on models above 100 in.-lbs. torque cap.
All torque springs required to meet
indicated torque specification
Optional Equipment:
Additional accessories: Pages 12-13
Torque Springs: Page 13
Torque Signal Kit: 302021PT
(Trigger w/Clecomatic clutch only)
9
Pistol Grip Screwdrivers
88 & 35 Series Clecomatic Clutch
88 Series
Torque Range: 1.7 – 20 Nm 15 – 180 In. Lbs.
88RSAPT-5C-3
■ Quick change and square drive
■Reversible
■ Trigger and Push & Trigger start
35 Series
35RSATP-10Q
Torque Range: 1.7 – 20 Nm 15 – 180 In. Lbs.
■ Pistol grip
■ Quick change and square drive
■Reversible
■ Trigger, Push-to-Start and Push & Trigger start
Model Number
1/4” Hex
Quick Change
Torque Range
3/8” Square Drive
in.-lbs.
Free
Speed
Nm
RPM
15 - 95
15 - 160
15 - 180
1.7 - 10
1.7 - 18
1.7 - 20
15 - 95
15 - 160
15 - 180
1.7 - 10
1.7 - 18
1.7 - 20
Length
Air Consumption
Weight
kg
Air Inlet
Min.
NPT Hose I.D. SCFM
in.
mm
lbs.
550
400
200
9.0
9.0
9.8
229
229
248
3.1
3.1
3.4
1.4
1.4
1.5
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
19
19
19
550
400
200
8.9
8.9
9.6
225
225
245
3.1
3.1
3.4
1.4
1.4
1.5
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
19
19
19
Push and Trigger Start - Sliding Knob Reverse
88RSAPT-7CQ
88RSAPT-5CQ
88RSAPT-2CQ
88RSAPT-5C-3
Trigger Start - Sliding Knob Reverse
88RSATP-7CQ
88RSATP-5CQ
88RSATP-2CQ
88RSATP-7C-3
88RSATP-5C-3
88RSATP-2C-3
General:
Tool performance rated at 90 psi (620kPa).
Weight does not include dead handle
Standard Equipment:
Operating instructions & service manual
Dead handle on all models above 100 in.lbs. torque
All torque springs required to meet indicated torque
Standard Equipment if Specified:
Dead handle (861006)
Model Number
1/4” Hex
Quick Change
Torque Range
3/8” Square Drive
Free
Speed
Optional Equipment:
Additional accessories: Pages 12-13
Bits & finders: Page 12
Torque Springs: Page 13
Length
Air Consumption
Weight
kg
Air Inlet
Min.
NPT Hose I.D. SCFM
in.-lbs.
Nm
RPM
in.
mm
lbs.
15 - 110
15 - 160
2 - 12
2 - 18
770
510
9.9
9.9
251
251
3.4
3.4
1.5
1.5
1/4”
1/4”
5/16”
5/16”
24
24
15 - 160
15 - 180
2 - 18
2 - 20
500
350
9.9
9.9
251
251
3.4
3.4
1.5
1.5
1/4”
1/4”
5/16”
5/16”
24
24
15 - 60
15 - 110
15 - 160
15 - 180
2-7
2 - 12
2 - 18
2 - 20
1500
750
500
350
9.0
9.8
9.8
9.8
229
248
248
248
3.1
3.4
3.4
3.4
1.4
1.5
1.5
1.5
1/4”
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
5/16”
24
24
24
24
Push-to-Start - Sliding Knob Reverse
35RSAP-10Q
35RSAP-7Q
Push and Trigger Start - Sliding Knob Reverse
35RSAPT-7Q
35RSAPT-5Q
Trigger Start - Sliding Knob Reverse
35RSATP-20Q
35RSATP-10Q
35RSATP-7Q
35RSATP-5Q
35RSATP-10-3
35RSATP-5-3
General:
Tool performance rated at 90 psi (620kPa).
Weight does not include dead handle
10
Standard Equipment:
Operating instructions & service manual
Dead handle on all models above 100 in.lbs. torque
All torque springs required to meet indicated torque
Standard Equipment if Specified:
Dead handle (861006)
Optional Equipment:
Additional accessories: Pages 12-13
Torque Springs: Page 13
Screwdrivers
19 & 8 Series Stall
19 Series Stall
Torque Range: 2.1 – 7.9 Nm 19 – 70 In. Lbs.
19PTSO5Q
■ 1/4” hex quick change drive
■ Trigger start
■ “P” and “T” style handles (19 series)
■ 2 interchangeable soft-touch grip sizes
(19 Series)
■ Adjustable reverse lever for true one-hand left or right - operation (19 series)
■ Sliding knob or push button reverse (8 series)
Model Number
1/4” Quick Change
19TTSO2Q
Torque Range
in.-lbs.
Free
Speed
Length
Air Consumption
Weight
Air Inlet Min. Hose SCFM
NPT
I.D.
Nm
RPM
in.
mm
lbs.
kg
2.1
2.9
4.5
5.1
5.0
7.9
2800
1900
1100
660
1800
800
5.8
6.1
5.8
6.1
5.4
6.1
146
154
146
154
137
156
1.19
1.19
1.19
1.19
2.1
2.4
0.5
0.5
0.5
0.5
1.0
1.1
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/4”
1/4”
11
11
11
11
19
19
2.1
2.9
4.5
5.1
2800
1900
1100
660
5.9
6.1
5.9
6.1
150
155
150
155
1.16
1.16
1.16
1.16
0.5
0.5
0.5
0.5
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
11
11
11
11
Trigger Start - T Handle - Sliding Knob Reverse
19TTS02Q
19TTS03Q
19TTS04Q
19TTS05Q
8RNP-20BQ
8RNP-10BQ
19
26
40
45
44
70
Trigger Start - P Handle - Sliding Knob Reverse
19PTS02Q
19PTS03Q
19PTS04Q
19PTS05Q
General:
Tool performance rated at 90 psi (620kPa).
Standard Equipment:
Operating instructions & service manual
Suspension bail
All torque springs required to meet indicated torque
19
26
40
45
Dead handle on all models above 100 in.lbs. torque
Standard Equipment if Specified:
Dead handle (861006; 8 series models)
Optional Equipment:
Additional accessories: Pages 12-13
Bits: Page 12
11
Screwdriver Accessories
Finder Springs
Standard and Extended
Flat Bits and Finders
Light Force
844000
Medium Force
Standard Length
(F=1 3/16 in.; G= 1 15/16 in.)
Screw
Size
1F- 2R
2F- 3R
3F- 4R
4F- 5R
5F- 6R
6F- 8R
8F-10R
10F-12R
12F-14R
Finder
Dimensions (in.)
Bit
Dimensions (in.)
Extended Length
(F=2 1/4 in.; G= 3 in.)
865728
Bit No.
Finder No.
A
B
C
D
E
Bit No.
Finder No.
849617
849843
849618
849153
849619
849154
849620
849155
849156
847299
863242
847300
847301
847302
847303
847294
847304
847305
.22
.250
.285
.315
.345
.380
.445
.530
.590
.169
.196
.228
.259
.291
.323
.386
.431
.513
.128
.140
.160
.193
.221
.256
.281
.318
.366
.026
.028
.032
.034
.036
.038
.042
.046
.050
.122
.134
.154
.187
.215
.250
.275
.312
.360
849891
849879
849892
849893
849894
849895
849896
849897
849898
847481
847480
847482
847483
847484
847485
847486
847487
847488
Phillips Bits and Support Bushings
Bit Holders and Support Bushings
847485
847303
809470
809473
Phillips Bit
Point Size
Bit Body
Diameter (in.)
Phillips Bit
Part No.
Support Bushing*
Part No.
Standard: 1/4 in. Hex Shank Bit – 2 3/4 in. O.A. Length;
Bushing – 1 3/16 in. O.A. Length
1
3/16
809451
2
1/4
809470
3
5/16
809471
Extended: 1/4 in. Hex Shank Bit – 3 1/2 in. O.A. Length;
Bushing – 2 1/4 in. O.A. Length
1
3/16
809453
2
1/4
809473
3
5/16
809474
849325
849621
847245
201203
1/4” Hex Drive Magnetic Bit Holder
Part No. 849325 (2 3/8” O.A. Length)
Magnetic Support Bushing* Part No. 849621
Nonmagnetic Support Bushing* Part No. 847245
Quick-Change Bushing Part No. 201203
Fits all finder type tools except No. 2 Screwdriver
*Bushing not required on Quick Change models.
847301
847303
847304
847483
847485
847487
*Bushing not required on Quick Change models.
Screw Sizes & Types
12
Maximum Head Diameter (inches)
Screw
Size
Approximate Thread
Body Diameter
(inches)
Round
Head
Flat Head
Oval Head
Fillister
Head
Pan Head
Binding
Head
Truss Head
Width of Slot
Max. - Min.
(inches)
0
1
2
3
4
5
6
8
10
12
1/4
5/16
.058
.071
.084
.096
.109
.122
.135
.161
.187
.213
.247
.309
.113
.138
.162
.187
.211
.236
.260
.309
.359
.408
.472
.590
.119
.146
.172
.199
.225
.252
.279
.332
.385
.438
.507
.635
.119
.146
.172
.199
.225
.252
.279
.332
.385
.438
.507
.635
.096
.118
.140
.161
.183
.205
.226
.270
.313
.357
.414
.518
.116
.142
.167
.193
.219
.245
.270
.322
.373
.425
.492
.615
–
_
.181
.208
.235
.263
.290
.344
.399
.454
.513
.641
.131
.164
.194
.226
.257
.289
.321
.384
.448
.511
.573
.698
.023 - .016
.026 - .019
.031 - .023
.035 - .027
.039 - .031
.043 - .035
.048 - .039
.054 - .045
.060 - .050
.067 - .056
.075 - .064
.084 - .072
Screwdriver Accessories
Inline Screwdriver Clutch Torque Springs
Torque Range
In. Lbs.
Nm
Spring Color
2 Series
Blue
Green
Ordering No.
1.5-.5
8-1
17-.06
.9-.1
202870
202869
19-5
38-10
45-15
-4.3-1.1
5.1-1.7
207652PT
207596PT
207696PT
17-7
55-15
75-35
1.9-.8
6.2-1.7
8.5-4
869203
867938
867931
55-15
160-35
180-60
6-2
18-4
20-7
202822
869306
869305
19 Series
Green
White
Orange
8 Series
Blue
Green
Red
88, 35 Series
Green
Yellow
Red
Note: Torque listed is immediately after the clutch and does not take into
consideration torque multiplication after the cluch, such as additional
planetary gears or right angle heads.
Dead Handle
Ordering No.
201770
861006
Used On
5 series, 19 series
8, 88, 35 series
861006
Handle Grips
Order No.
202464
869734
203621
202346
203762
203833
Grip Type
Round inline
Round inline
Tri-roundular inline
Round inline
Pistol grip
Pistol grip
Used On
2 series
5 series
5 series
8 series p-t-start
5 series
8, 88, 35 series
203621
203762
203833
Suspension Bails
Order No.
931962
869168
865777
412603
412603
Used On
19 series
2 series
5 series inline & 8,
88 series inline push-to-start
5 series pistol grip & 8, 88
series inline lever start
931962
207019
Exhaust Overhose
& Adapter
Torque Signal Kits
Part No.
869204
Order No.
Description
Used On
207019
869204
Overhose
Adapter
19 series inline & right angle
8, 88, 35 series inline, push-to-start
Piped Away
Exhaust Hose Adapter
203632
Order No.
Used On
203632
5 series inline
203808
8, 88, 35 series inline p-t-start
Tool Used On
301106
19SCA & 19RAA series (inline & right angle)
302021PT 19TTA & 19PTA series (pistol "P" handle or "T" handle)
Portable Tool Balancers
Part
Number
200427
200428
200429
PL-12A
BL-2A
BL-4A
Capacity
Max.
Min.
2 lbs.
4 lbs.
5 lbs.
12 lbs.
2 lbs.
4 lbs.
0 lbs.
2 lbs.
3 lbs.
1 lbs.
1 lbs.
2 lbs.
Net
Weight
1.25 lbs.
1.25 lbs.
1.25 lbs.
–
1.1 lbs.
1.1 lbs.
PL-12A
Min. Distance
Length of
Hook to Hook Working Cable
10.8 in.
10.8 in.
10.8 in.
6.8 in.
10.4 in.
10.4 in.
5.0 ft.
5.0 ft.
5.0 ft.
4.6 ft.
5.2 ft.
5.2 ft.
BL-2A
200427
13
Screwdrivers
Model Number Nomenclature
Cleco 2 Series
Cleco 19 Series Inline
2 RS A - 10 - B
Tool Series
2
Tool Type
RS – Rev. Screwdriver
Torque Control Mechanism
A – Clecomatic Clutch
Generation
B – Second
Housing (clutch)
- –Standard
S –Short
Gear Train Designation
10
19
S
X
A
XX
Series
19
X
Output Drive
Q – Quick Change
B – Bit & Finder
Tool Type
S – Rev. Screwdriver
B – Pushbutton Reverse
Maximum Torque
SPA Models
02 2.1 Nm
03 2.9 Nm
04 4.5 Nm
05 5.0 Nm
06 5.1 Nm
Handle
P – Inline (Push-to-Start)
P – “P” Handle Pistol
C – “T” Handle Pistol
C – Combination (Lever/ Push-to-Start)
BPA Models
02 1.6 Nm
03 2.1 Nm
04 3.7 Nm
05 5.1 Nm
06 5.1 Nm
Torque Control Mechanism
A – Clecomatic Clutch
S – Stall
Cleco 19 Series Pistol
19
X
X
Series
19
XX
Q
Output Drive
Q – Quick Change
Handle
P – Pistol Grip P-Handle
T – Pistol Grip T-Handle
Tool Type
C – Combination (Trigger/ Push-to-Start)
T – Trigger
Torque Control Mechanism
A – Clecomatic Clutch
S – Stall
14
A
Maximum Torque
02 2.1 Nm
06
03 2.9 Nm
07
04 4.5 Nm
09
05 5.0 Nm
15
5.1 Nm
6.8 Nm
8.9 Nm
5.1 Nm
Angle Nutrunners
Right Angle
TORQUE
(Nm)
Selecting Your Cleco Nutrunner
500
Cleco offers over 500 nutrunners, most of which
can be equipped with a wide variety of drive
options. This generates over 3,000 different
nutrunner combinations, allowing the exact tool
with precise features to be chosen for specific
job applications.
400
300
The following items should be considered before
selecting the tool: ergonomic factors associated
with the man/tool/task relationship, torque
and speed requirements, tool and fastener
accessibility, fastener joint variations, operator
skill level and air supply.
200
100
Tool performance can be affected by air supply.
Plant air line pressure to the tool will vary widely
due to several factors: distance of tool from
compressor; size of transmission lines, air drops,
manifolds, hose length and diameter, and fittings.
All power tool specifications are based on the
tool receiving air at 90 p.s.i.g. (6.2 bar) with
adequate air flow volume while the tool is
in operation.
50
40
30
20
10
Clean Operation
5
Many Cleco angle nutrunners are equipped with
oilless blades. This is a very important feature
where a clean assembly operation is critical.
0
Series
19
24
34
45
55
75
15
Angle Nutrunners
Clecomatic Nutrunners
Stall Nutrunners
Clecomatic nutrunners
shut off the
instant the
clutch reaches its
adjustable preset
torque. This action provides an accurate method
of controlling torque without sacrificing tool speed.
Stall-type nutrunners consist of an air motor
connected to the output spindle by planetary gearing
and angle heads. In operation, the tool runs down
the fastener until the torque resistance in the fastener
causes the tool to stall. When the tool stalls, the
throttle is released by the operator and the tool is
removed. Stall-type tools can produce accurate
torques, especially on applications with varying
torque rates; however, their torque output can be
Muffling material in larger cavity reduces sound
levels with minimal affect on tool performance.
Torque range and RPM laser etched
on tool for quick identification.
Optional
air signal
connection
for automated
assembly line
interface.
Short stroke shut-off valve
responds in milliseconds for
improved mean shift.
Innovative low inertia motor
design provides more usable
power in a smaller package.
Bell shaped housing improves
handling, prevents slippage.
Fluctuating air pressure has little to no effect
on torque, as long as the tool receives sufficient
pressure from the air supply to trip the clutch.
Hardened steel
bearing plates assure
longer life, resist wear.
19 Series
24 Series
34 Series
16
Highly visible indexed
reverse ring for ease of operation.
easily influenced by the operator and by fluctuations
in the air line pressure. Operators should be instructed
to allow the tool to stall before releasing the throttle
and to avoid pulling or wrenching the tool after it stalls.
The Cleco Right Angle Solution
The Cleco 19, 24 and 34 series pneumatic
nutrunners are the most recent additions to our line
of smaller, lighter and faster tools. These powerful
right angle clutch tools cover a wide torque range
from .5 to 68 NM. We continue to drive our line into
the best power to weight ratio of any other tool in
the market, in a relentless effort to offer the most
performance, the highest level of accuracy and the
greatest flexibility in its class of pneumatic tools.
We also design our tools to offer you reduced energy
costs, longer operating life, fewer replacement parts
and lower service costs.
Performance
Flexibility
The Cleco 19, 24 and 34 series right angle
nutrunners incorporate an innovative motor design
that provides more usable power in a smaller
package. This design contributes greatly to our
smaller, lighter, faster goals and provides the highest
power to weight ratio in its class to date.
Cleco nutrunners come with an externally adjusted
and indicated clutch and offer improved ergonomics
with a very comfortable handle area. The polymer
coated angle heads on the 24 and 34 series reduce
in-system damage. These durable heads are splined
to allow indexing for better position. The operator will
appreciate a quieter tool thanks to the composite
exhaust deflector which also allows the exhaust to
be efficiently piped away for even further reduced
noise levels. These noted improvements are geared
towards enhancing the tools positive operational
features while reducing operator fatigue.
“Jeweled” bearings fully support clutch
assembly for longer service life.
Improved computer-designed
Clecomatic® clutch delivers longer
service life with reduced torque
degradation due to wear.
Externally adjustable clutch with a
standard screwdriver. Convenient
access slot also allows view of setting.
Easy assembly/disassembly with
a standard spanner wrench.
Lower profile splined angle head
allows simplified orientation of angle
head to throttle.
Precision machined
bevel gears and angle
head eliminate shims
for easy maintenance,
longer gear life.
Repeatability
Our motor design coupled with the improved
Clecomatic Clutch, provides capability ratios which
meet or exceed global standards. This performance
is unheard of until now in a pneumatic clutch tool
and is backed by the certification of ISO 5393.
Access plug
simplifies
lubrication.
Polymer coated angle
head is durable and
reduces in system
damage.
17
Angle Nutrunners
19, 24 & 34 Series Clecomatic Clutch
19 Series
Torque Range:
0.5 – 11 Nm 4.0 – 100 In. Lbs.
■ Class-leading accuracy
and repeatability
■ External torque adjustment
■ Sliding knob reverse
■ 1/4” & 3/8” square drive
24 Series
Torque Range:
4.0 – 23 Nm 3.0 – 17 Ft. Lbs.
■ External torque adjustment
■ 3/8” square drive
■ Indexable anglehead
■ One torque spring to meet
specified torque
■ Oiless blades
34 Series
Torque Range:
8.0 – 75 Nm 4.0 – 55 Ft. Lbs.
■ External torque adjustment
■ 3/8” and 1/2” square drive
■ Indexable anglehead
■ One torque spring to meet
specified torque
■ Oiless blades
19RAA07AH2
24RAA11AL3
Model Number Example
34RAA33AX3
24RAA23AM 3
Series
19
24
34
Rotation
R-Reversible
Tool Style
A – Right Angle
Torque Control
A – Clecomatic
S – Stall
Maximum Torque Nm
(Rounded to the nearest Nm)
18
Square Drive
2 – 1/4” (AL only)
3 – 3/8”
4 – 1/2” (AZ only)
Angle Head Size
L – Light Duty
M – Medium Duty
H – Heavy Duty
X – Extra Heavy Duty
Z – Super Heavy Duty
Tool Termination
A Angle head
Torque Range*
Tool Range
With Std. Spring
Model Number
1/4” Sq. Dr.
3/8” Sq. Dr.
in.-lbs.
Nm
in.-lbs.
Nm
RPM
in.
mm
lbs.
kg
in.
mm
in.
mm
Air Consumption
Air
Min.
Inlet Hose SCFM
NPT
I.D.
2400
2100
1650
1450
950
570
850
500
500
340
200
11.9
12.5
12.2
12.7
12.0
12.4
12.5
12.9
12.9
12.3
12.9
303
316
310
321
305
316
316
326
326
312
326
1.7
1.8
1.8
1.8
1.7
1.8
1.8
1.9
1.9
2.1
1.9
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.9
0.9
1.0
0.9
1.06
1.19
1.06
1.19
1.06
1.06
1.19
1.19
1.19
1.19
1.19
27
30
27
30
27
27
30
30
30
30
30
0.36
0.50
0.36
0.50
0.36
0.36
0.50
0.50
0.50
0.50
0.50
9
13
9
13
9
9
13
13
13
13
13
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
Free
Speed
Length
Weight
Head Height
Side to
Center
19 Series - Reversible – Clecomatic Clutch
19RAA02AM2
19RAA02AH2
19RAA03AM2
19RAA03AH2
19RAA04AM2
19RAA05AM2
19RAA06AH2*
19RAA07AH2*
19RAA09AH2*
19RAA11AH2*
19RAA12AH2*
19RAA02AH3
19RAA03AH3
19RAA06AH3
19RAA07AH3
19RAA09AH3
19RAA11AH3
19RAA12AH3
5 - 19
6 - 21
5 - 27
6 - 30
12 - 42
12 - 50
13 - 53
13 - 60
18 - 75
18 - 100
18 - 100
0.6 - 2.1
5 - 19
0.6 - 2.1
0.7 - 2.4
6 - 21
0.7 - 2.4
0.6 - 3.1
5 - 21
0.6 - 2.4
0.7 - 3.4
6 - 24
0.7 - 2.7
1.4 - 4.7 12 - 42 1.4 - 4.7
1.4 - 5.7 12 - 42 1.4 - 4.7
1.5 - 6.0 13 - 48 1.5 - 5.4
1.5 - 6.8 13 - 48 1.5 - 5.4
2.0 - 8.5 30 - 75 3.4 - 8.5
2.0 - 11.3 30 - 100 3.4 - 11.3
2.0 - 11.3 30 - 100 3.4 - 11.3
*Applications greater than 50 in.-lbs. may affect
spindle/drive durability.
General:
Tool performance rated at 90 psi (620kPa) air pressure.
Standard Equipment:
Operating instructions & service manual.
Model Number
3/8” Sq. Dr.
1/2” Sq. Dr.
Suspension bail.
All torque springs required to meet
indicated torque specification.
Optional Equipment:
Additional accessories: Page 36
Non-Reverse Kit: 207030
Torque Signal Kit: 301106 (Clecomatic clutch only)
Torque Range
ft.-lbs.
Nm
Free
Speed
Length
mm
Weight
RPM
in.
lbs.
2200
1770
1260
1200
700
600
14.1
14.1
14.1
14.2
15.0
15.0
358
358
358
360
380
380
2.6
2.6
2.6
2.8
3.2
3.2
2060
1675
1185
710
580
545
480
385
255
155
255
155
14.5
14.5
14.6
15.4
15.4
15.5
15.6
15.6
16.2
17.0
16.2
17.0
368
368
370
390
390
393
397
397
411
431
411
431
2.7
2.7
2.9
3.2
3.3
3.5
3.4
3.4
3.7
3.9
3.7
3.9
11
11
11
11
11
11
11
11
11
11
11
Overhose: 207019
Quick Change and 1/4” magnetic hex
outputs available on AH3 models only.
Quick Change: Change AH3 to AHQ
1/4” Magnetic Hex: Change AH3 to AHM
Head Height
kg
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
Side to
Center
in.
mm
Air Consumption
Min.
Air Inlet Hose
SCFM
NPT
I.D.
in.
mm
1.2
1.2
1.2
1.3
1.4
1.4
1.08
1.08
1.08
1.16
1.16
1.16
27.5
27.5
27.5
29.5
29.5
29.5
.47
.47
.47
.52
.52
.52
12.0
12.0
12.0
13.2
13.2
13.2
3/8” 5/16”
3/8” 5/16”
3/8” 5/16”
3/8” 5/16”
3/8” 5/16”
3/8” 5/16”
24
24
24
24
24
24
1.2
1.2
1.3
1.5
1.5
1.6
1.5
1.5
1.7
1.8
1.7
1.8
1.08
1.08
1.16
1.22
1.22
1.36
1.36
1.36
1.60
1.60
1.60
1.60
27.5
27.5
29.5
31.0
31.0
34.5
34.5
34.5
41.0
41.0
41.0
41.0
.47
.47
.52
.57
.57
.67
.67
.67
.70
.70
.70
.70
12.0
12.0
13.2
14.4
14.4
17.1
17.1
17.1
18.0
18.0
18.0
18.0
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
34
34
34
34
34
34
34
34
34
34
34
34
24 Series – Reversible – Clecomatic Clutch
24RAA06AL3
24RAA07AL3
24RAA11AL3
24RAA12AM3
24RAA19AM3
24RAA23AM3
3-4
3-5
5-8
5-9
7-14
9-17
4-5.5
5-7
7-11
6-12
10-19
12-23
34 Series – Reversible – Clecomatic Clutch
34RAA08AL3
34RAA11AL3
34RAA15AM3
34RAA26AH3
34RAA28AH3
34RAA33AX3
34RAA37AX3
34RAA47AX3
34RAA68AZ3
34RAA75AZ3
34RAA68AZ4
34RAA75AZ4
4-6
5-8
7-11
10-19
10-20
12-24
14-27
17-35
25-50
28-55
25-50
28-55
General:
Tool performance rated at 90 psi (620kPa) air pressure.
8-5
7-11
9-15
13-26
14-28
17-33
18-37
24-47
34-68
38-75
34-68
38-75
Standard Equipment:
Operating instructions & service manual
Suspension bail
Clutch adjustment tool
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
Optional Equipment:
Assembly wrench: 201898
Torque signal kit: 301937PT
Non-reversible kit: 204999
Exhaust Overhose: 204978
Additional accessories: Page 36
19
Angle Nutrunners
45, 55 & 75 Series Clecomatic Clutch
45 Series
Torque Range:
28 – 115 Nm 21 – 85 Ft. Lbs.
■ Button start
■ Reversible & non-reversible
■ External torque adjustment
■ 1/2” square drive
55 Series
Torque Range:
32 – 176 Nm 24 – 130 Ft. Lbs.
■ Lever start
■ Reversible & non-reversible
■ External torque adjustment
■ Rotating exhaust deflector
■ 1/2” square drive
45RNAB-3P-4
75 Series
Torque Range:
95 – 430 Nm 70 – 320 Ft. Lbs.
■ Lever start
■ Reversible & non-reversible
■ External torque adjustment
■ Rotating exhaust deflector
■ 1/2” & 3/4” square drive
55RNAL-3T-4
75RNAL-2X-4
45, 55 & 75 Model Number Example
55 R N A L - XX X-X
Sq. Drive
3 – 3/8”
4 – 1/2”
6 – 3/4”
Series
45, 55, 75
Rotation
N-Non Reversible
R-Reversible
Nutrunner
Torque Control
A – Clecomatic
– – Stall
20
Start Type
L – Lever
B – Button
Angle Head
P, T, V, X
Gear Train
2, 3, 4, 6, 7, 10
Model Number
1/2” Sq. Dr.
Torque Range
ft.-lbs.
Nm
Free
Speed
RPM
Length
in.
mm
Head
Height
Weight
lbs.
kg
in.
6.8
6.4
6.8
6.4
6.8
3.1
2.9
3.1
2.9
3.1
2.0
1.6
2.0
1.6
2.0
6.3
2.8
1.6
Side to
Center
mm
in.
mm
Angle
Head
Air Consumption
Air
Min.
Inlet Hose SCFM
NPT
I.D.
45 Series – Clecomatic Clutch – Button Start – Reversible
45RNAB-4T-4
45RNAB-3P-4
45RNAB-3T-4
45RNAB-2P-4
45RNAB-2T-4
21 - 42
26 - 52
31 - 62
34 - 71*
37 - 85
28 - 57
35 - 71
42 - 84
46 - 96*
50 - 115
300
240
200
180
150
17.6
17.5
17.6
17.5
17.6
448
445
448
445
448
50
41
50
41
50
0.9
0.7
0.9
0.7
0.9
22
18
22
18
22
T
P
T
P
T
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
33
33
33
33
33
41
0.7
18
P
3/8”
3/8”
33
45 Series Clecomatic Clutch – Button Start – Non-Reversible
45NAB-3P-4
28 - 57
38 - 77
Model Number
1/2” Sq. Dr.
3/4” Sq. Dr.
300
17.5
445
General:
Tool performance rated at 90 psi (620kPa) air pressure.
* Maximum torque of tool exceeds the maximum
torque rating for the head, high maintenance should
be expected when operated at the upper torque
capacity range.
Torque Range
ft.-lbs.
Nm
Free
Speed
RPM
Length
Weight
Standard Equipment:
Operating instructions & service manual.
All torque springs required to meet indicated torque
Optional Equipment:
Additional accessories: Page 36
Head
Height
Side to
Center
mm
in.
mm
Angle
Head
Air Consumption
Air
Min.
Inlet Hose SCFM
NPT
I.D.
in.
mm
lbs.
kg
in.
370
330
280
220
190
140
175
130
110
80
19.3
19.1
19.3
19.1
19.3
19.3
21.9
21.9
22.6
22.6
489
486
489
486
489
489
556
556
575
575
7.8
7.4
7.8
7.4
7.8
7.8
13.3
13.3
15.0
15.0
3.5
3.3
3.5
3.3
3.5
3.5
6.0
6.0
6.8
6.8
2.0
1.6
2.0
1.6
2.0
2.0
2.5
2.5
2.8
2.8
50
41
50
41
50
50
64
64
70
70
0.9
0.7
0.9
0.7
0.9
0.9
1.1
1.1
1.4
1.4
22
18
22
18
22
22
28
28
37
37
T
P
T
P
T
T
V
V
X
X
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
55
55
55
55
55
55
70
70
70
70
480
400
320
270
200
210
130
19.1
19.3
19.1
19.3
19.3
21.9
22.6
486
489
486
489
489
556
575
7.3
7.6
7.3
7.6
7.6
13.0
14.8
3.3
3.5
3.3
3.5
3.5
5.9
6.7
1.6
2.0
1.6
2.0
2.0
2.5
2.8
41
50
41
50
50
64
70
72.0
0.9
72.0
0.9
0.9
1.1
1.4
18
22
18
22
22
28
37
P
T
P
T
T
V
X
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
55
55
55
55
55
70
70
55 & 75 Series – Lever Start – Reversible
55RNAL-6T-4
55RNAL-4P-4
55RNAL-4T-4
55RNAL-3P-4
55RNAL-3T-4
55RNAL-2T-4
75RNAL-3V-4
75RNAL-2V-4
75RNAL-3X-6
75RNAL-2X-6
24 - 48
26 - 54
29 - 64
36 - 80*
43 - 95
50 - 125*
70 - 140
90 - 190*
110 - 225
150 - 305
32 - 65
35 - 73
39 - 87
49 - 109*
58 - 129
81 - 170*
95 - 190
122 - 255*
150 - 305
203 - 410
55 & 75 Series – Lever Start – Non-Reversible
55NAL-4P-4
55NAL-4T-4
55NAL-3P-4
55NAL-3T-4
55NAL-2T-4
75NAL-2V-4
75 NAL-2X-6
28 - 57
33 - 69
39 - 84*
45 - 100
55 - 130*
100 - 200
160 - 320
* Maximum torque of tool exceeds the maximum
torque rating for the head, high maintenance should
be expected when operated at the upper torque
capacity range.
General:
Tool performance rated at 90 psi (620kPa) air pressure.
38 - 77
39 - 93
49 - 114*
58 - 136
68 - 176*
135 - 271
215 - 430
Standard Equipment:
Operating instructions & service manual
Torque Reaction Mounting Plate (75 series)
All torque springs required to meet indicated torque
Optional Equipment:
Additional accessories: Page 36
21
Angle Nutrunners
19, 24, 34, 45, 55 & 75 Series Stall – Reversible & Non-Reversible
19 Series Reversible
Torque Range:
3.2 – 6.2 Nm 2.3 – 4.6 Ft. Lbs.
■ Lever start
■ Sliding knob reverse
24 Series Reversible
Torque Range:
13 Nm 9.6 Ft. Lbs.
■ Lever start
■ Twist ring reverse
19RAS04AH2
34 Series Reversible
Torque Range:
11 - 36 Nm 8.1 - 26 Ft. Lbs.
■ Lever start
■ Twist ring reverse
34RAS36AX3
45 Series Reversible
Torque Range:
62 - 125 Nm 46 - 92 Ft. Lbs.
■ Button start
■ Twist ring reverse
55 Series Reversible
& Non-Reversible
45RNB-2T-4
Torque Range:
56 - 203 Nm 41 - 150 Ft. Lbs.
■ Lever start
■ Reversible & non-reversible
55RNL-3T-4
75 Series Reversible
& Non-Reversible
Torque Range:
210 - 475 Nm 155 - 350 Ft. Lbs.
■ Lever start
■ Reversible & non-reversible
75NL-3V-4
22
Model Number
Max. Torque
ft.-lbs.
Nm
Square
Drive
Free
Speed
in.
RPM
in.
mm
lbs.
kg
in.
mm
in.
1/4
1/4
1/4
3/8
1700
1500
850
880
11.4
11.2
10.6
11.0
290
284
269
279
1.3
1.4
1.2
1.3
0.6
0.6
0.5
0.6
1.06
1.19
1.06
1.19
27
30
27
30
1/2
1/2
1/2
1/2
310
250
210
160
15.1
15.0
15.1
15.1
384
381
384
384
5.5
5.1
5.5
5.5
2.5
2.3
2.5
2.5
2.0
1.6
2.0
2.0
12.0
11.7
12.9
13.0
16.1
16.8
16.8
19.4
20.1
20.1
305
297
328
330
410
425
425
492
511
511
2.1
2.2
2.6
2.8
6.1
6.5
6.5
11.4
13.1
13.1
1.0
1.0
1.2
1.3
2.8
2.9
2.9
5.2
6.0
6.0
1.1
1.2
1.2
1.4
2.0
2.0
2.0
2.5
2.8
2.8
Length
Weight
Head Height
Side to
Center
Air Consumption
mm
Air Inlet
NPT
Min.
Hose
I.D.
SCFM
0.36
0.5
0.36
0.5
9
13
9
13
1/8”
1/8”
1/8”
1/8”
3/16”
3/16”
3/16”
3/16”
11
11
11
11
50
41
50
50
0.9
0.7
0.9
0.9
22
18
22
22
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
33
33
33
33
28
30
31
35
50
50
50
64
70
70
0.5
0.5
0.6
0.7
0.9
0.9
0.9
1.1
1.4
1.4
12
13
14
17
22
22
22
28
37
37
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
5/16”
5/16”
5/16”
5/16”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
34
24
34
34
55
55
55
70
70
70
19 Series – Reversible – Stall
19RAS03AM2
19RAS04AH2
19RAS05AM2
19RAS06AH3
2.3
2.6*
3.8
4.6
3.2
3.6*
5.2
6.2
45 Series – Reversible – Stall
45RNB-4T-4
45RNB-3P-4
45RNB-3T-4
45RNB-2T-4
46
58
69
92
62
79
94
125
24, 34, 55 & 75 Series – Reversible – Stall
34RAS11AL3
24RAS13AM3
34RAS28AH3
34RAS36AX3
55RNL-7T-4
55RNL-3T-4
55RNL-2T-4
75RNL-3V-4
75RNL-3X-6
75RNL-2X-6
8.1
9.6
20
26
41
100*
130*
155
245
325
11
13
28
36
56
136*
176*
210
330
440
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
Standard Equipment:
Operating instructions & service manual
Suspension bail (19 series)
Torque reaction mounting plate (75 series)
Optional Equipment:
19 Series:Non-Reverse Kit:
Overhose: * Maximum torque of tool exceeds the maximum
torque rating for the head, increased maintenance
should be expected when operated at the upper
torque capacity range.
General:
Tool performance rated at 90 psi (620kPa) air pressure.
Model Number
Max. Torque
ft.-lbs.
Nm
1675
1200
710
545
490
195
145
190
120
90
207030
207019
Quick Change and 1/4” magnetic hex
outputs available on AH3 models only.
Quick Change: Change AH3 to AHQ
1/4” Magnetic Hex: Change AH3 to AHM
24/34 Series:Assembly wrench:
Non-reverse kit
Additional accessories: Page 36
Square
Drive
Free
Speed
in.
RPM
in.
mm
lbs.
kg
in.
mm
in.
mm
290
210
300
230
140
16.8
16.8
19.4
19.4
20.1
425
425
492
492
511
6.4
6.4
11.1
11.1
12.9
2.9
2.9
5.0
5.0
5.8
2.0
2.0
2.5
2.5
2.8
50
50
64
64
70
0.9
0.9
1.1
1.1
1.4
22
22
28
28
37
Length
Weight
Head Height
Side to
Center
201898
204999
Air Consumption
Min.
Air Inlet Hose
SCFM
NPT
I.D.
55 & 75 Series Non-Reversible – Stall
55NL-3T-4
55NL-2T-4
75NL-3V-4
75NL-2V-4
75NL-2X-6
110*
150*
165
220*
350
149*
203*
225
298*
475
1/2
1/2
1/2
1/2
3/4
* Maximum torque of tool exceeds the maximum
torque rating for the head, high maintenance should
be expected when operated at the upper torque
capacity range.
General:
Tool performance rated at 90 psi (620kPa) air pressure
Standard Equipment:
Operating instructions & service manual
Torque Reaction Mounting Plate (75 series)
19, 24, & 34 Model Number Example
19, 24, 34
Rotation
R-Reversible
Tool Style
A – Right Angle
Torque Control
A – Clecomatic
S – Stall
Maximum Torque Nm
(Rounded to the nearest Nm)
1/2”
1/2”
1/2”
1/2”
1/2”
55
55
70
70
70
Optional Equipment:
Additional accessories: Page 36
Safety Lever: 201638
45, 55 & 75 Model Number Example
24RA S 23 A M 3
Series
1/2”
1/2”
1/2”
1/2”
1/2”
Square Drive
2 – 1/4” (AL only)
3 – 3/8”
4 – 1/2” (AZ only)
Angle Head Size
L – Light Duty
M – Medium Duty
H – Heavy Duty
X – Extra Heavy Duty
Z – Super Heavy Duty
55 R N A L - XX X-X
Sq. Drive
3 – 3/8”
4 – 1/2”
6 – 3/4”
Series
45, 55, 75
Rotation
N-Non Reversible
R-Reversible
Nutrunner
Torque Control
A – Clecomatic
– – Stall
Start Type
L – Lever
B – Button
Angle Head
P, T, V, X
Gear Train
2, 3, 4, 6, 7, 10
Tool Termination
A Angle head
23
Swingbar Nutrunners
Smaller, Faster, Lighter
For high torque applications where a small tool is
necessary, for consistency in clamp load across
joint types or for simply eliminating the maintenance
needs of an angle tool, the Cleco 64 Series provides
the best solution for today’s heavy assembly
environment.
Benefits of a Swingbar Tool
moved from location to location or if other tools
requiring full line pressure use the same air line, the
tool will require a dedicated air pressure regulator.
The Cleco Selectork feature in the 64 Series tools is
a small pressure regulator that takes the place of the
standard air inlet bushing and eliminates the need
to have a separate pressure regulator installed in the
plant floor system. Because of the small size of the
Selectork there is a limited pressure adjustment range
of from 60 to 90 psi. To order this option on the
Cleco 64TTS Swingbar tools replace the “S” in the
model number with a “K” (64TTS….to a 64TTK….).
A swingbar tool includes a reaction bar that freely
swings 360˚. This allows the reaction bar to be
moved to an appropriate bracing point without any
disassembly or repositioning of a spline. Once
positioned, the reaction bar absorbs the reaction
forces of the tool.
Selectork
Selectork
Output torque from a stall tool is achieved by
adjusting the air pressure to the tool. If the tool is
Reversible
A simple to use and convenient slide reverse lever improves productivity
by allowing for the loosening of fasteners without changing tools.
Ergonomics
Improved
Ergonomics
Top and bottom
air inlets help
customize the 64
Series Reaction
Bar Nutrunners to
the operator’s work
area.
Infinite-position reaction bar can
quickly be moved to an appropriate
brace point, eliminating reaction forces
of the rundown.
Improved
Ergonomics
Comfort molded
handles and lighter
weights reduce
operator fatigue and
improve productivity
Selectork
for optimal in-tool
air pressure
regulation.
24
Speed and Torque Tests for the
Cleco 64 Series Swingbar Nutrunners
The goal of any fastening application is to maintain a
high degree of accuracy while minimizing the length of
time required to perform the rundown. The Cleco 64
Series Swingbar Nutrunners utilize a single powerful
motor that limits speed shifts and offers a fast and
accurate rundown regardless of joint type.
Competitive units with high RPM’s quickly drop their
speed at threshold resulting in an overall longer
rundown period. This gap is multiplied when prevailing
torque is present.
To read the graphs below, the orange line represents
the tool speed while the blue line represents the torque
generated throughout a rundown. Notice the correlation
between speed and torque and its overall effect on
rundown time.
The swingbar can instantly be positioned to absorb the torque
reaction of the tool while maintaining a comfortable position with
the trigger hand.
Random Comparison on 120˚ Joint
Competitive Twin Motor
Cleco
Speed – RPM
Speed – RPM
1.7 sec.
310 Nm
Time – Seconds
Torque – Newton Meters
Torque – Newton Meters
1.6 sec.
310 Nm
Time – Seconds
Random Comparison on 720˚ Joint
Competitive Twin Motor
Cleco
Speed – RPM
Speed – RPM
6.0 sec.
312 Nm
Torque – Newton Meters
Time – Seconds
Torque – Newton Meters
4.2 sec.
306 Nm
Time – Seconds
Again the free speed of the Cleco tool is slower, however with its faster tightening speed the overall time is almost 2 seconds faster.
25
Reaction Bar & Swingbar Nutrunners
45 Series Inline
Torque Range:
14 - 62 Nm 10 - 46 Ft. Lbs.
■ Button start
■ Twist ring reverse
45RNAB-4-3
55 Series Inline
Torque Range:
27 - 91 Nm 20 - 67 Ft. Lbs.
■ Lever start
■ Twist ring reverse
55RNAL-4-4
64 Series Pistol
Torque Range:
34 - 3850 Nm 25 - 2837 Ft. Lbs.
■ Trigger start
■ Sliding knob reverse
■ Swingbar
64TTS640D8
Selectork 64 Series
Torque Range:
26 - 3850 Nm 19 - 2837 Ft. Lbs.
■
■
■
■
Pistol grip
Reversible
Swingbar
Selectork adjustment allows air
pressure regulation at the tool for
individual performance from a
common air line
Selectork 64TTK34D4
45 & 55 Model Number Example
64 Model Number Example
55 R N A L-X-X
Sq. Drive
3 – 3/8”
4 – 1/2”
Series
45, 55
Rotation
N-Non Reversible
R-Reversible
Gear Train
2, 3, 4, 6
Nutrunner
Torque Control
A – Clecomatic
– – Stall
26
Start Type
L – Lever
B – Button
64 T
T
S XX D
Series
64
Tool Style
T – T-Handle
Pistol
Tool Type
T – “T” Handle Pistol
X
Output Drive
4–1/2” 8 –1”
6–3/4” 12–1 1/2”
Tool Termination
D –Direct Drive
Maximum Torque (Nm)
Options
S – Stall
K – Selectork
Torque Range
Model Number
ft.-lbs.
Free
Speed
Drive
Size
Nm
Length
RPM
in.
Air Consumption
Weight*
mm
lbs.
kg
Air Inlet
NPT
Min. Hose
I.D.
SCFM
5.4
5.4
5.4
5.4
2.4
2.4
2.4
2.4
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
33
33
33
33
6.5
6.5
6.5
3.0
3.0
3.0
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
55
55
55
45 Series – Inline – Clecomatic – Button Start – Twist Ring Reverse
45RNAB-6-3
45RNAB-4-3
45RNAB-3-3
45RNAB-2-4
10 - 16
14 - 22
18 - 33
23 - 46
14 - 22
19 - 30
24 - 45
31 - 62
3/8
3/8
3/8
1/2
740
560
370
270
14.5
14.5
14.5
14.5
368
368
368
368
55 Series – Inline – Clecomatic – Lever Start – Twist Ring Reverse
55RNAL-4-4
55RNAL-3-4
55RNAL-2-4
20 - 34
25 - 51
30 - 67
27 - 46
34 - 69
46 - 91
1/2
1/2
1/2
* Weight without reaction bar.
General:
Tool performance rated at 90 psi (620kPa) air pressure
Model Number
Non-Selectork
Selectork
560
370
270
410
410
410
Standard Equipment:
Operating instructions & service manual
Aluminum Torque Reaction Bar
Torque Range
ft.-lbs.
16.1
16.1
16.1
Nm
Drive
Size
Optional Equipment:
Steel Torque Reaction Bar: 869770
Additional accessories: Page 36
Free
Speed
RPM
Length
in.
mm
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
12.5
12.5
12.5
12.5
12.5
12.5
13.0
15.9
15.9
15.9
15.9
15.9
15.9
15.9
21.5
290.8
290.8
290.8
290.8
290.8
290.8
290.8
290.8
316.2
316.2
316.2
316.2
316.2
316.2
328.9
404.1
404.1
404.1
404.1
404.1
404.1
404.1
546.1
kg
Air Consumption
Air
Min.
Inlet Hose
I.D. SCFM
NPT
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
3.7
3.7
3.7
3.7
3.7
3.7
3.9
6.6
6.6
6.6
6.6
6.6
6.6
6.6
14.6
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
Weight*
lbs.
Pistol – Trigger Start – Reversible
64TTS34D4
64TTS44D4
64TTS55D4
64TTS75D4
64TTS90D4
64TTS110D4
64TTS125D4
64TTS140D4
64TTS150D6
64TTS175D6
64TTS205D6
64TTS255D6
64TTS345D6
64TTS425D6
64TTS570D6
64TTS640D8
64TTS750D8
64TTS930D8
64TTS1260D8
64TTS1475D8
64TTS1820D8
64TTS1985D8
64TTS3850D12
64TTK34D4
64TTK44D4
64TTK55D4
64TTK75D4
64TTK90D4
64TTK110D4
64TTK125D4
64TTK140D4
64TTK150D6
64TTK175D6
64TTK205D6
64TTK255D6
64TTK345D6
64TTK425D6
64TTK570D6
64TTK640D8
64TTK750D8
64TTK930D8
64TTK1260D8
64TTK1475D8
64TTK1820D8
64TTK1985D8
64TTK3850D12
19 - 25
24 - 32
30 - 41
41 - 55
50 - 66
61 - 81
69 - 92
77 - 103
83 - 111
97 - 129
113 - 151
141 - 188
191 - 254
235 - 313
315 - 420
354 - 472
415 - 553
514 - 686
697 - 929
816 - 1088
1007 - 1342
1098 - 1464
2128 - 2837
* Weight without reaction bar.
General:
Tool performance rated at 90 psi (620kPa) air pressure.
26 - 34
33 - 44
41 - 55
56 - 75
68 - 90
83 - 110
94 - 125
105 - 140
113 - 150
131 - 175
154 - 205
191 - 255
259 - 345
319 - 425
428 - 570
480 - 640
563 - 750
698 - 930
945 - 1260
1106 - 1475
1365 - 1820
1489 - 1985
2888 - 3850
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
1"
1"
1"
1 1/2"
725
570
445
340
270
225
200
180
160
135
115
95
70
55
42
32
27
22
16
14
11
10
5
Standard Equipment:
Operating instructions & service manual
Aluminum Torque Reaction Bar
Steel Torque Reaction Bar (tools rated above 50 ft. lbs.)
Slave Square Drive (64TTS3850D12 & 64TTK3850D12)
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
8.2
8.2
8.2
8.2
8.2
8.2
8.6
14.5
14.5
14.5
14.5
14.5
14.5
14.5
32.2
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
Optional Equipment:
Steel Torque Reaction Bar: 64......D4 series: 48047128
Additional accessories: Page 36
27
Flush Socket Nutrunners
Clecomatic Clutch & StallStall
34 Series
Torque Range:
5 – 103 Nm
4 – 76 Ft. Lbs
■ External torque adjustment
(Clecomatic models)
■ Indexable anglehead
■ One torque spring to meet specified range
■ Oilless blades
■ Reversible
X Dimension For Flush Socket
34RAAF3
Head Inches Millimeters Socket Size Range
34RAAF2
F11.54 39
F21.69 43
F32.32 59
34RAAF1
8–15mm
10–15mm
13–21mm
NOTE: Models listed are examples. Use chart on bottom of facing page for specific model required but not listed.
Model Number
Free
Speed
RPM
Torque
ft.-lbs.
Length
Nm
in.
lbs.
kg
Anglehead
Height
Side to Center
in.
mm
in.
mm
Weight
mm
Air Consumption
Air Inlet
Min.
NPT Hose I.D. SCFM
Clecomatic - Lever Start - Reversible
34RAA09F1
34RAA16F1
34RAA28F1
34RAA33F2
34RAA47F2
34RAA53F2
34RAA67F3
34RAA94F3
1825
4-7
5-9
1055
7-12
9-16
645 10-20* 14-28*
540 12-24 17-33
380 17-35 24-47
265 17-39 24-53
265 24-49 33-67
185 35-69 47-94
17.0
17.0
17.8
18.8
19.0
19.0
20.5
20.5
432
432
452
478
483
483
521
521
3.7
3.7
3.9
4.7
5.1
5.1
5.8
5.8
1.7
1.7
1.8
2.1
2.3
2.3
2.6
2.6
1.54
1.54
1.54
1.69
1.69
1.69
2.32
2.32
39
39
39
43
43
43
59
59
0.55
0.55
0.55
0.67
0.67
0.67
0.87
0.87
14
14
14
17
17
17
22
22
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
34
34
34
34
34
34
34
34
17.0
17.0
17.8
19.0
19.0
20.5
20.5
20.5
432
432
452
483
483
521
521
521
3.4
3.4
3.5
4.4
4.4
5.5
5.5
5.5
1.5
1.5
1.6
2.0
2.0
2.5
2.5
2.5
1.54
1.54
1.54
1.69
1.69
2.32
2.32
2.32
39
39
39
43
43
59
59
59
0.55
0.55
0.55
0.67
0.67
0.87
0.87
0.87
14
14
14
17
17
22
22
22
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
5/16”
34
34
34
34
34
34
34
34
Stall - Lever Start - Reversible
34RAS10F1
34RAS18F1
34RAS30F1
34RAS40F2
34RAS52F2
34RAS58F3
34RAS73F3
34RAS103F3
1825
1055
645
480
380
335
265
185
7
13
22*
29
38
43
54
76
10
18
30*
40
52
58
73
103
* Maximum torque of tool exceeds the maximum
torque rating for the head, high maintenance should
be expected when operated at the upper torque
capacity range.
General:
Tool performance rated at 90 psi (620kPa) air pressure.
28
Standard Equipment:
Operating instructions & service manual
Suspension bail
Exhaust Overhose
Clutch adjustment tool (Clecomatic tools)
Mounting plate (F3 tools)
Optional Equipment:
Assembly wrench: 201898
Torque signal kit: 301937PT
Non-reversible kit: 204999
Mounting plates: F1 tools 57217101
F2 tools 43287131
Additional accessories: Page 36
57218103
Tight clearance applications, once only accessible by the
use of hand tools or crowfoot attachments, can now be
tightened by the family of Cleco Flush Socket Pneumatic
Tools at a speed that maximizes productivity. Tools
equipped with a Clecomatic clutch assure good torque
repeatability.
Socket within the
right angle head.
Overall Head Height
Overall Head Height
Available clearance
Available clearance
Standard right angle head with square drive and separate socket Flush socket tools have plenty of clearance to fit on the same
will not fit on tight clearance applications. The overall head height application. Clecomatic flush socket tools tighten with much
is greater than the available clearance.
higher accuracy than tools with crowfoot attachment. The overall
head height is less than the available clearance.
Model Number Example
Base Tool
Socket No. (ordered with base tool)
34RAA 16F1
Motor
Control
A – Clutch
S – Stall
FS1MG0 0
Reversible
Output Type
1–Thru Hex 2–Magnetic
Tool Style
A – Angle
Maximum Torque Output
F1 Clutch: 9, 16, 28 Nm
Stall: 10, 18, 30 Nm
F2 Clutch: 33, 47, 53 Nm
Stall: 40, 52 Nm
F3 Clutch: 67, 94 Nm
Stall: 58, 73, 103 Nm
Flush Socket Head
F1 Head: 8–15 mm socket capacity
F2 Head: 10–15 mm socket capacity
F3 Head: 13–21 mm socket capacity
Extension Length
0 – Flush 2 – 1/4” 4 – 1/2” 6 – 3/4”
Flush Socket Head
1 – F1 Head
2 – F2 Head
3 – F3 Head
Socket Type
FS – Flush
Socket Sizes
EC – 3/8”
MA – 7mm
ED – 7/16” MB – 8mm
EE – 1/2”
MC – 9mm
EF – 9/16” MD – 10mm
ME – 11mm
MF – 12mm
MG – 13mm
MH – 14mm
MI – 15mm
MM – 19mm
Note: When ordering, specify the base tool and order the socket separately.
The socket will be installed in the tool before shipment.
29
Crowfoot Nutrunners
Clecomatic Clutch & Stall
34 Series
Torque Range:
14 – 30 Nm
10 – 22 Ft. Lbs
■ External torque adjustment
(Clecomatic models)
■ Indexable anglehead
■ One torque spring to meet specified range
■ Oilless blades
■ Reversible
34RCA30D1MG01
34RCA30D3MB01
NOTE: Models listed are examples. Use chart on bottom of facing page for specific model required but not listed.
Model Number
15 Degree Head
Free Speed
30 Degree Head
RPM
Torque Range
Socket Size
Length
Weight
Air Consumption
ft.-lbs.
Nm
in.
mm
in.
mm
lbs.
kg
NPT
I.D.
SCFM
425
11-22
15-30
5/16
8
20.0
507
4.7
2.2
3/8”
5/16”
34
490
21
29
5/16
8
19.6
497
4.5
2.1
3/8”
5/16”
34
Clecomatic - Lever Start - Reversible
34RCA30D1
34RCA30D3
Stall - Lever Start - Reversible
34RCS29D1
34RCS29D3
General:
Tool performance rated at 90 psi (620kPa) air pressure.
30
Standard Equipment:
Operating instructions & service manual
Suspension bail
Exhaust Overhose
Clutch adjustment tool (Clecomatic tools)
Extra Equipment:
Specify socket from page 31
Optional Equipment:
Assembly wrench: 201898
Torque signal kit: 301937PT
Non-reversible kit: 204999
Additional accessories: Page 36
15° Head
Part Number: 301071
Maximum Recommended
Torque: 22 ft. lbs. (30 Nm)
Standard Length Socket
30° Head
Part Number: 301072
Maximum Recommended
Torque: 22 ft. lbs. (30 Nm)
Standard Length Socket
Model Number Example
Base Tool
Socket No. (ordered with base tool)
34 R C A 30D1
Motor
34
Rotation
R – Reversible
Tool Style
C – Crowfoot
Output Type
Crowfoot
Socket
1 – Thru Hex
Extension Length
0 – Flush
Control
A – Clecomatic
S – Stall
Max Output Torque
Clecomatic: 30
Stall: 14, 29
CSXXX X
Tool Termination
D1 15° Head
D3 30° Head
Sockets
Flush
EA –1/4”
EC –3/8”
ED –7/16”
EE – 1/2”
EF – 9/16”
MB –8mm
EH –11/16”
4 – 1/2”
MD –10mm
ME –11mm
MF –12mm
MG –13mm
MH –14mm
MI – 15mm
6 – 3/4”
1/2” Extended
EB – 5/16”
EC – 3/8”
ED – 7/16”
EE – 1/2”
EF – 9/16”
MB –8mm
MD –10mm
ME –11mm
MF –12mm
MG –13mm
3/4” Extended
EE – 1/2”
MG –13mm
MH –14mm
31
Hold & Drive Nutrunners
Clecomatic Clutch & Stall
34 Series
Torque Range:
24 – 103 Nm
17 – 76 Ft. Lbs
■ External torque adjustment
(Clecomatic models)
■ Indexable anglehead
■ One torque spring to meet specified range
■ 1” retraction of hold spindle
■ Oilless blades
■ Reversible
Hold Size
34RAA67
Output Drive Size
NOTE: Models listed are examples. Use chart on bottom of facing page for specific model required but not listed.
Model Number
Hold Size
Free
Speed
RPM
Torque
ft.-lbs.
Nm
Length
Weight
Anglehead
Height
Air Consumption
Side to Center
NPT
Hose
I.D.
SCFM
27
27
27
3/8”
3/8”
3/8”
5/16”
5/16”
5/16”
34
34
34
27
27
27
3/8”
3/8”
3/8”
5/16”
5/16”
5/16”
34
34
34
in.
mm
lbs.
kg
in.
mm
in.
mm
20.7
20.7
20.7
526
526
526
8.0
8.0
8.0
3.5
3.5
3.5
2.4
2.4
2.4
61
61
61
1.06
1.06
1.06
20.7
20.7
20.7
526
526
526
7.7
7.7
7.7
3.5
3.5
3.5
2.4
2.4
2.4
61
61
61
1.06
1.06
1.06
Clecomatic - Lever Start - Reversible
34RAA53H3
34RAA67H3
34RAA94H3
5mm Female Hex
7mm Female Hex
8mm Female Hex
335
265
185
17-39 24-53
24-49 33-67
35-69 47-94
Stall - Lever Start - Reversible
34RAS58H3
34RAS73H3
34RAS103H3
5mm Female Hex
T30 Torx
10mm Female Hex
335
265
185
General:
Tool performance rated at 90 psi (620kPa) air pressure.
32
43
54
76
58
73
103
Standard Equipment:
Operating instructions & service manual
Suspension bail
Exhaust Overhose
Clutch adjustment tool (Clecomatic tools)
Mounting Plate
Optional Equipment:
Assembly wrench: 201898
Torque signal kit: 301937PT
Non-reversible kit: 204999
Additional accessories: Page 36
Hold & Drive tool approaches the application.
“Hold & Drive” bolts are
used with these tools in
automotive and truck frame
applications. They reduce
assembly handling to one
person working from one side
of the workpiece. The bolt is
held stationary by the tool
while the nut is tightened
from the same side.
Hold socket fits over bolt and prevents it from rotating.
Tool is pushed down and started until drive socket
engages and tightens nut.
Model Number Example
Base Tool
Drive Socket
34RAA 53 H
Motor
H3 MLO M6 B
Oval Length (for oval only)
Reversible
Control
A – Clutch
S – Stall
Hold Socket
Tool Style
A – Angle
Maximum Torque Output
Clutch: 53, 67, 94 Nm
Stall: 58, 73, 103 Nm
Tool Termination
H – Hold & Drive
(Example: For a 6mm x 8mm oval, this dimension
would be MB, but drop the “M” as in M6B.)
Hold Socket (dimension across flats, oval also)
EA – 1/4”
M6 –6mmMH –14mm
EB – 5/16”
MA –7mm15 –T15
EC – 3/8”
MB –8mm20 –T20
ED – 7/16”
MC –9mm25 –T25
EE – 1/2”
MD –10mm30 –T30
EF – 9/16”
ME –11mm40 –T40
EG – 5/8”
MF –12mm45 –T45
M5 – 5mm
MG –13mm
(Example: On a 6mm x 8mm oval, this dimension would be M6.)
Retainer Shaft Length
3 – 3 1/2”
4 – 4”
5 – 5 3/8”
6 – 5 7/8”
9 – 9”
Hold Socket Style
F – Female Hex T – Torx
M – Male Hex
O – Female oval
Drive Socket Size
EE – 1/2”
EK –7/8”
EQ – 1 1/4” ML – 18mm MR – 24mm
EF – 9/16” EL – 15/16”MG –13mmMM – 19mmMS – 25mm
EG –5/8”
EM –1”MH –14mmMN – 20mmMT – 26mm
EH –11/16” EN –1 1/16”MI – 15mmMO – 21mmMU –27mm
EI – 3/4”
EO –1 1/8”MJ – 16mm MP – 22mm XX – Special
EJ – 13/16” EP – 1 3/16”MK –17mm MQ – 23mm
Note: When ordering, specify the base tool and order the socket separately. The socket will be installed in the tool before shipment.
33
Tube Nut Wrenches
Clecomatic Clutch
24 Series
Torque Range:
14 - 40 Nm
19 - 54 Ft. Lbs
■ One hand, two position throttle
■ External torque adjustment
■ Auto alignment socket
24 Series (T2)
24 Series (T3)
24 Series (T4)
Termination
T2, T3 & T4 Head Height
24 Series Power Unit
With Auto Alignment
“B”
T2 Head
2.63” (67 mm)
T4 Head
T3 Head
1.44” (37 mm)
1.56" (40 mm)
“C”
“A”
“A”
“C”
“C”
“A”
“D”
“D”
NOTE: Models listed are examples. Use chart on bottom of facing page for specific model required but not listed.
Model Number
“D”
1.94” (49 mm)
Torque Range
Ft. Lbs.
Nm
Min - Max
Min - Max
lbs.
kg
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
670
3.6 - 8.9
5 - 12
2.7
1.2
12
305
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
240
175
130
10.4 - 14.7
14.7 - 22.1
19.2 - 29.5
14 - 20
20 - 30
26 - 40
4.3
4.5
5.1
2.0
2.0
2.3
16.8
16.7
17.7
426
426
449
7/16
9/16
7/8
—
—
—
1.42
1.65
2.36
36
42
60
0.55
0.59
0.59
14
15
15
0.28
0.47
0.67
7.0
11.9
17.0
0.53
0.73
0.93
13.5
18.5
23.5
Free
Speed
RPM
Weight
Length
Socket Size
“A”
“B”
“C”*
“D”
Power Unit Only
24RTA12
Self Aligning
24RTA20T2
24RTA30T3
24RTA40T4
* Varies by socket dimension.
General:
Air Inlet: 1/4” NPT
Tool performance rated at 90 psi (620kPa) air pressure.
34
Extra Equipment:
Specify socket from page 35
Optional Equipment:
Torque signal kit: 301937PT (see page 39)
Auto Alignment Head
Off
Socket Return
Forward
Tube and hose applications, once only accessible by the use of
hand tools, can now be tightened by the Cleco family of Tube
Nut Wrenches at a speed that maximizes productivity.
Torque repeatability is assured by the proven Clecomatic clutch
and low inertia motor. These models use a single lever for the
tightening of the fastener and the return of the socket to the
open position. The flexibility coupled with the proven capabilities
greatly increases the productivity rate of the assembly line.
Make sure that the socket is set to the open
position. If not, push the throttle lever down
half way to release the socket back to the
open position.
Slide the tool on the fastener and push the
throttle lever down fully to run the fastener
down.
To free the tool, slide the tool off the
tightened fastener and operate the throttle
lever halfway to release the socket back to
the open position.
Model Number Example
Base Tool
24R T A 20T2
Socket (Order Separately)
KS2ED 0 0
Motor
24
Tool Style
R – Reversing
mechanism for
socket orientation
Tool Type
T – Tube Nut
Torque Control
A – Clecomatic Clutch
Max Torque (Nm)
T2 - 20 Nm
T3 - 30 Nm
T4 - 40 Nm
Head Size
T2 - 20 Nm Max.
T3 - 30 Nm Max.
T4 - 40 Nm Max.
Head Type
KS2 - T2
KS3 - T3
KS4 - T4
Output Type
0 Partial Thru Hex 2 Double Thru Hex
1 Thru Hex
3 Partial Thru Double Hex
Extension Length
0Flush 41/2”
21/4” 63/4”
Maximum Hex Socket Sizes
MG, 1/2”
T2 Head Type
MM, 3/4”
T3 Head Type
MU, 1 1/16” T4 Head Type
00, ## (specials) T3 Head Type
Socket Sizes
EA –1/4”
EC –3/8”
ED –7/16”
EE – 1/2”
EF – 9/16”
EH –11/16”
EJ – 13/16”
EK –7/8”
EL – 15/16”
EM –1”
EO –1 1/8”
M5 –5mm
M6 –6mm
MA –7mm
MB – 8mm
MD –10mm
ME –11mm
MF –12mm
MG –13mm
MH –14mm
MI – 15mm
MJ –16mm (5/8”)
MK –17mm
ML – 18mm
MM –19mm
MN –20mm
MO –21mm
MP – 22mm
MQ –23mm
MR –24mm
MS – 25mm
MT – 26mm
MU –27mm (1 1/16”)
Note: When ordering, specify the base tool and order the socket separately. The socket will be installed in the tool before shipment.
35
Nutrunner Accessories
Torque Reaction Bars & Slave Square Drives
Mounting Brackets (right angle tools)
Part No.
Description
Used On
Part No.
Description
Used On
869770
48047128
46037081
46177030
46607058
Steel Bar
Steel Bar
Slave Square Drive
Slave Square Drive
Slave Square Drive
45, 55 series inline
64...D4 series
64...D4 series
64...D6 series
64...D8 series
201012
201039
201510
201034
Torque reaction bracket
Fixed tooling bracket
Torque reaction bracket
Torque reaction bracket
45, 55 series
45, 55 series
75 series
75 series (standard)
201510
201039
1
Extension
201012
2 Extensions
3 Extensions
201034
Extension Kit (3.5”)
Part No.
Used On
301081
301108
34 series (37 Nm or higher)
24/34 series (36 Nm or lower)
Part No.
205831
205833
205834
205837
205839
205835
205838
Used On
Tool Series
24/34
24/34
24/34
19
45/55
45/55
75
Torque Signal Kit
Suspension Bail
Anglehead Covers
Anglehead
AH, AM
AX
AZ
AH
T
P
V
Air signal to indicate clutch shut-off.
Part No.
Used On
867711
204987
8, 35, 45, 55 series
24, 34 wire bail
Part No.
867711
201900
Swivel Suspension Bail
Part No.
Used On
541715-5
54397004
46437006
46607016
46037036
24, 34 series
64...D4 series
64...D6 series
64...D8 series
64...D12 series
541715-5
Assembly Wrench
Part No.
201898
Joint Simulator
Description
550006
36
Joint Simulator
Used On
201900
24/34 Clecomatic (old style)
301937PT 24/34 Clecomatic (new style)
301106
14 Clecomatic
Torque Range
ft.-lbs.
Nm
220-12
300-15
Width
in.
mm
10.4
264
Height
in.
mm
Length
in.
mm
16
26
406
667
Part
No.
550006
Two required
Accessories
Cleco TVP-100 Series Torque Verifier
for both individual fastener and batch parameters,
assuring that every fastener has been rundown to the
capability of the tool.
The TVP-100 Series Torque Verifier
provides low-cost assembly assurance
for pneumatic screwdrivers, nutrunners
and pulse tools.
The Cleco TVP-100 verifier improves your assembly
process by eliminating operator error caused by early
trigger release, fastener cross-threading or re-hits.
The TVP-100 is designed for use with pneumatic
clutch screwdrivers/nutrunners and Cleco shut-off
pulse tools equipped with torque signal kits.
The TVP-100 provides visual and audio feedback
Based on existing Cleco TME controller technology,
the TVP-100 navigational screen allows for simple
set-up and operation.
The TVP-100 works by reading the signature of a
ported pneumatic assembly tool through its fastening
cycle. Any deviation from the normal signature
caused by re-hits, cross threads, early trigger release
or a number of variables will elicit a NOK visual and
audio signal from the verifier, notifying the operator
of an error. Whereas a Cleco DC controller controls
the tool and the fastening process, the TVP-100 is a
cost-effective way of verifying torque by following the
torque signature of a tool.
Highly visible indicators
(Cycle Accept, Batch Accept, and Reject)
Input/Output
connector for line
process interface.
Easy-to-read
menu driven
display for ease
of setup and
analysis.
Air Pressure
Transducer
Connection
Power entry
module with
spare fuse.
37
Accessories
Cleco TVP-100 Series Torque Verifier
Features
■ Verifies fastener installation with
OK/NOK audio and visual indicators
■ On screen verification of individual
fastener assembly status with
batch count
■ VGA screen displays graph for
each rundown
■ Stores 1,000 rundowns
■ Sequencing capability
■ 8 parameter sets available for
multiple applications
■ “Auto Cal” permits fast and easy tool
set up for any joint type
■ Password protected
■ Multiple languages
TVP-100 Series Torque Verifiers
Model Number
115VAC*
230VAC*
TVP-110-15-U
TVP-110-15-D
TVP-110-15-S
TVP-110-15-P
TVP-110-30-U
TVP-110-30-D
TVP-110-30-S
TVP-110-30-P
Language
English
German
Spanish
Portuguese
Weight
Width
Height
Depth
lbs.
kg
in.
mm
in.
mm
in.
mm
6
6
6
6
2.72
2.72
2.72
2.72
8.75
8.75
8.75
8.75
222
222
222
222
9.13
9.13
9.13
9.13
232
232
232
232
4.13
4.13
4.13
4.13
105
105
105
105
** 230V units are CE compliant.
All model numbers include power cable, air signal transducer, 25 foot cable to connect TVP to air signal transducer, and 8 foot air line to connect transducer to tool.
NOTE: Tool must be equipped with torque signal kit.
24 Volt Inputs/Outputs:
Inputs: Up to 8 Applications
Reset
Suspend
38
Outputs: Cycle Accept
Batch Accept
Reject
Accessories
Cleco TVP-100 Series Torque Verifier
Accessories
Torque Signal Kits
Part No.
Tool Used On
301106
302021PT
201900
301937PT
934918
19SCA & 19RAA series
19TTA & 19PTA series
24RAA and 34RAA (old style)
24RAA and 34RAA (new style)
PTH series pulse tools
TVP-100
(“C” & “D” vintage only)
Phoenix Connector
Part No.
Description
542892
24 Volt Input/Output
Phoenix connector
Strain relief for above
connector
939348
25’ cable
Power Cable
Cables
Part No.
Description
207237
207238
115V Transducer and cable
230V Transducer and cable
*115V and 230V transducer and cable
assemblies have different connectors at the
TVP end of the cable.
Air Signal
Transducer
8’ Air Line
39
Pulse Nutrunners
Durable.
Economical.
Low Maintenance.
Unbeatable Performance
We are constantly improving our products to
guarantee you ideal productivity. The new Cleco
H-Series pulse tools combine legendary durability
with unmatched repeatability so that you will be
able to complete every joint quickly and reliably.
■ Broad Tool Selection
With a variety of shut-off and non-shut-off pulse tools
to choose from you are sure to find just the right
Cleco pulse tool for the job.
High Precision Shut-Off
mechanism ranges close to
the characteristics of
an electric tool at a
tolerance of +/- 10%
at Six Sigma.
Improved Tool End
Efficient 3-Chamber Air Motor
■ Speed govenor
■ Reduces your tightening time with
increased torque and a usable
high-end dynamic.
■ Unique design reduces blade wear.
■ Less vibration for increased
user comfort
■ Reduced air consumption
with axial force protection
Reduced Tool Maintenance
■ New patented double chambered pulse
unit with built-in automatic oil reserve
■ Up to 500,000 tightening cycles before
the first service
Expansion chamber
3-Chamber Motor Housing
Pulse Unit
40
TORQUE
(Nm)
PULSE TOOL TORQUE RANGES
M16
M14
M12
M10
M8
M7
M6
M5
7PTHH
7PHH
11PTHH
11PHH
15STH
20PTHH
20PHH
35PTHH
35PHH
55PTHH
55PHH
80PTHH
80PHH
PISTOL
110PTHH 120PTHH
110PHH 120PHH
140PTH
140PH
160PTH
160PH
250PTH
250PH
400PTH
400PH
7STH
15STH
35STH
INLINE
Low Noise Levels
Noise levels of these tools
are well below standard
air tools for an
operator-friendly
environment. There
is no loud metallic hammering
under load.
Ships Ready For Error Proofing
Easy Set-Up
■ Works with existing TVP torque verifier
■ Located near air inlet to maximize ergonomics
■ Insert 2mm hex
into rear port of tool
■ Positive stops in both
directions to prevent
loss and/or damage
Standard air signal indicating tool
shutoff for use with Cleco TVP Error
Proofing System.
Adjustable Motor Speed
■ Easily adjustable motor speed to insure
accuracy on hard joints
■ Can be locked in place to
prevent accidental adjustment
41
Pulse Nutrunners
Hydraulic Pulse Shut-Off & Non Shut-Off
35PTHH403
H-Series PTH
Torque Range:
Bolt Size:
4 - 120 Nm
M5 – M12
3.0 - 88.8 Ft. Lbs
#10 – 1/2”
Inertia shut-off
Motor govenor equipped
External torque adjustment
External speed control
Torque signal port
Adjustable pulse unit volume
simplifies maintenance
■ Market-leading repeatability
■ Reversible
■ Oilless blades
■
■
■
■
■
■
C-Series PTHC & PTHFC
Torque Range:
100 - 400 Nm
74 - 295 Ft. Lbs
■
■
■
■
■
■
■
Bolt Size:
M12 – M20
1/2” – 3/4”
140PTHC25Q
Hydraulic pulse shut-off
Motor govenor equipped
External torque adjustment
External speed control
Reversible
Oilless blades
Torque signal port
C-Series STHFC & STHF
Torque Range:
2.6 - 35 Nm
1.9 - 26 Ft. Lbs
■
■
■
■
■
■
■
Bolt Size:
M5 – M8
#10 – 3/8”
Hydraulic pulse shut-off
Motor govenor equipped
External torque adjustment
External speed control
Reversible
Oilless blades
Torque signal port
15STH
Model Number Nomenclature
120P T H H AXXQ
MaximumTorque Output
7 – 400 Nm
Output Termination
Vintage
Q – Quick-change
2 - 1/4” Sq. Dr.
3 - 3/8” Sq. Dr.
4 - 1/2” Sq. Dr.
6 - 3/4” Sq. Dr.
Tool Configuration
P – Pistol
S - Inline
Torque Control
(-) – Non-Shut-Off
T - Air Shut-Off
Torque Delivery
H – Hydraulic
42
Speed
40-4000 RPM
Air Feed
A – Top air feed
Pulse Nutrunners
Hydraulic Pulse Shut-Off
Model Number
Drive Type
Torque Range
Ft.Lbs.
Nm
Free Speed
RPM
Air Consumption
Weight
lbs.
kg
NPT
Hose I.D.
SCFM
H-Series – Pistol Grip – Shut-Off Models
S
H
U
T
7PTHH352
7PTHH35Q
11PTHH352
11PTHH35Q
11PTHH353*
20PTHH40Q
20PTHH403*
35PTHH40Q
35PTHH403*
55PTHH403*
80PTHH35Q
80PTHH354
110PTHH30Q
120PTHH304
1/4” Sq.Dr.
1/4” QC
1/4” Sq.Dr.
1/4” QC
3/8” Sq.Dr.
1/4” QC
3/8” Sq.Dr.
1/4” QC
3/8” Sq.Dr.
3/8” Sq.Dr.
7/16” QC
1/2” Sq.Dr.
7/16” QC
1/2” Sq.Dr.
3.0-5.1
3.0-5.1
4.4-8.1
4.4-8.1
4.4-8.1
7.4-14.7
7.4-14.7
14.8-25.8
14.8-25.8
22.1-40.5
36.9-59.0
36.9-59.0
55.3-81.1
55.3-88.8
4-7
4-7
6-11
6-11
6-11
10-20
10-20
20-35
20-35
30-55
50-80
50-80
75-110
75-120
3500
3500
3500
3500
3500
4000
4000
4000
4000
4000
3500
3500
3000
3000
1.74
1.74
1.81
1.87
1.83
1.92
1.90
2.31
2.31
2.54
3.20
3.10
3.75
3.75
0.79
0.79
0.82
0.85
0.83
0.87
0.86
1.05
1.05
1.15
1.45
1.40
1.70
1.70
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
3/8”
3/8”
3/8”
3/8”
1/2"
1/2"
7.06
7.06
7.06
7.06
7.06
8.7
8.7
15.9
15.9
15.9
19.4
19.4
19.4
19.4
100-140
100-160
2500
2500
5.7
5.7
2.6
2.6
3/8”
3/8”
1/2”
1/2”
25.4
25.4
C-Series – Pistol Grip – Shut-Off Models
O
F
F
140PTHC25Q
160PTHC256
7/16” QC
3/4” Sq.Dr.
74-103
74-118
C-Series – Pistol Grip – Shut-Off Models – Trigger Throttle
250PTHFC226
400PTHFC206
3/4” Sq.Dr.
3/4” Sq.Dr.
118-184
185-295
160-250
250-400
2200
2000
8.8
11.7
4.0
5.3
3/8”
3/8”
1/2”
1/2”
33.5
33.5
1.9-4.9
12-26
12-26
2.6-6.6
15-35
15-35
5500
4000
4000
1.8
3.1
2.9
0.83
1.4
1.3
1/8”
1/4”
1/4”
3/8”
3/8”
7.0
15.9
15.9
1.9-4.9
3.6-11
12-26
12-26
3.6-11
2.6-6.6
5.0-15
15-35
15-35
5.0-15
5500
4000
4000
4000
3000
2.1
2.4
3.3
3.3
2.4
0.93
1.1
1.5
1.5
1.1
1/8”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
7.0
16.5
15.9
15.9
16.5
In-Line – Push-to-Start
7STHFA55Q
35STHFA40Q
35STHFA404
1/4” QC
7/16” QC
1/2” Sq.Dr.
C-Series – In-Line – Lever
7STHFC55Q
15STHFC40Q
35STHFC40Q
35STHFC404
15STHC40Q
1/4” QC
1/4” QC
7/16” QC
1/2” Sq.Dr.
1/4” QC
PTHHA=Top Air Inlet
(*) 7/16” Quick Change Chuck available separately
as an accessory
General:
Tool performance rated @ 87 psi (6 bar) air pressure.
Standard Equipment:
Suspension bail and torque adjusting wrench.
Torque signal port (pistol grip models only)
Optional Equipment:
Additional accessories: Page 53
55PTHH403
55PTHHA403
43
Pulse Nutrunners
Hydraulic Pulse Non Shut-Off
55PHHA403
H-Series PH Non-Shut-Off
Torque Range:
Bolt Size:
4 - 120 Nm
M5 – M12
2.9 - 88.5 Ft. Lbs
#10 – 1/2”
■ External speed control
■ Reversible
■ Oilless blades
Model Number
N
O
N
S
H
U
T
O
F
F
Drive Type
55PHH403
Torque Range
Ft.Lbs.
Free Speed
RPM
Air Consumption
Weight
lbs.
kg
NPT
Hose I.D.
SCFM
H-Series – Pistol Grip – Non Shut-Off Models
7PHH602
7PHH60Q
11PHH653*
11PHH652
11PHH65Q
20PHH753*
20PHH75Q
35PHH653*
35PHH65Q
55PHH603*
80PHH604
80PHH60Q
110PHH55Q
120PHH554
1/4” Sq.Dr.
1/4” QC
3/8” Sq.Dr.
1/4” Sq.Dr.
1/4” QC
3/8” Sq.Dr.
1/4” QC
3/8” Sq.Dr.
1/4” QC
3/8” Sq.Dr.
1/2” Sq.Dr.
7/16” QC
7/16” QC
1/2” Sq.Dr.
2.9-5.2
2.9-5.2
4.4-8.1
4.4-8.1
4.4-8.1
7.4-14.7
7.4-14.7
14.7-25.8
14.7-25.8
22.1-40.5
36.9-59.0
36.9-59.0
55.3-81.1
55.3-88.5
4-7
4-7
6-11
6-11
6-11
10-20
10-20
20-35
20-35
30-55
50-80
50-80
75-110
75-120
6000
6000
6500
6500
6500
7500
7500
6500
6500
6000
6000
6000
5500
5500
1.70
1.74
1.74
1.72
1.76
1.85
1.90
2.25
2.29
2.47
3.09
3.13
3.68
3.64
0.77
0.79
0.79
0.78
0.80
0.84
0.86
1.02
1.03
1.12
1.40
1.41
1.66
1.65
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2"
1/2"
8.7
8.7
10.5
10.5
10.5
17.3
17.3
19.4
15.9
22.9
26.5
26.5
30.0
30.0
4500
4500
4000
3500
5.7
5.7
8.6
11.5
2.6
2.6
3.9
5.2
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
31.7
31.7
40.6
42.3
Hign Torque Pistol Grip – Non-Shut-Off Models
140PH45Q
160PH456
250PHF406
400PHF356
7/16” QC
3/4” Sq.Dr.
3/4” Sq.Dr.
3/4” Sq.Dr.
74-103
74-118
118-184
184-295
PTHHA=Top Air Inlet
((*) 7/16” Quick Change Chuck available separately
as an accessory.
For 7-75 Series Models, small handle can be ordered
by substituting “S” for “L” in model number.
44
Nm
100-140
100-160
160-250
250-400
General:
Tool performance rated @ 87 psi (6 bar) air pressure.
Standard Equipment:
Suspension bail and torque adjusting wrench.
Optional Equipment:
Additional accessories: Page 53
Pulse Tool Accessories
Rubber Tool Stand
Hydraulic Filler Unit
Part Number
Filler Unit
Complete
Filler Unit
Only
928477
932072
140/160 PTHC../ PH..
928485
250/400 PTHC../ PH..
35 STH..
928475
931663
7 STH..
928474
928486
15 STH..
928473
Part Number
928483
Tool Series
931041 (one piece)
D & H Series 7PTH – 120PTH
930119 (two pieces)
C Series 140/160PTH/PH/
250PTH / 400PTH
Tool Series
Connector
Only
928483
Filler Unit
932072
Connector
931968
Connector
TVP-100 Torque Signal Kit
Air signal to indicate shut-off.
Part Number
934918
Reserve Oil
Filling Set
Tool Series
PTH series pulse tools
and vintage shut-off tools only
Part No.
936695PT
7/16” Quick Change Chuck Adapter
Part Number
935472
Tool Series
To convert 11/20/35/55PTHH/PTHHA/
PHH/PHHA to a
Quick-Change chuck
Hydraulic Oil
Part Number
Container Size
539317
One Quart
Covers
Vibration Absorber
Part No.
Fits Model
Part No.
Fits Model
937442PT
Protective cover for 7/11/20PTHHA/7/11/20PHHA
935965
35/55PTHHA/PHHA
937443PT
Protective cover for 35PTHHA/35PHHA
935966
80/110/120PTHHA/PHHA
937444PT
Protective cover for 55PTHHA/55PHHA
937445PT
Protective cover for 80PTHHA/80PHHA
937446PT
Protective cover for 110/120PTHHA/110/120PHHA
937447PT
Protective cover for 7/11/20PTHH/7/11/20PHH
937448PT
Protective cover for 35PTHH/35PHH
937449PT
Protective cover for 55PTHH/55PHH
937450PT
Protective cover for 80PTHH/80PHH
937451PT
Protective cover for 110/120PTHH/110/120PHH
45
Impact Wrenches
Proven heavy-duty telescoping impact
mechanism adds power...cuts weight...
reduces shock to the operator.
Telescopic Impact Wrenches
Positive Lock Socket Retainer
With the positive lock socket retainer, sockets snap on...
and stay on until released. Offered on spline drives, the
retainer can be serviced without disassembling the tool.
Exclusive through-bolt construction
reduces replacement costs
Steel front end/motor housing/handle are clamped
together by four high-strength steel bolts. This exclusive
feature provides better tool performance,
eliminates stripped threads and loose
inserts in motor housing.
Positive oil-foam lubrication system
reduces major cause of impact wrench
maintenance.
Rotor
Hammer
The smooth-hitting
Anvil
Cleco telescopic
impact mechanism
has only three major
parts - hammer, anvil
and rotor... providing
more power directly to the fastener. The hammer is splined
to the inside of the motor, which then impacts directly on
the anvil, delivering more power per blow.
Other important features include:
■Comfortable grip handle
■Outside, inside triggers and pistol grip models
■Multiposition dead handle,
and spade type “D” handle available
■Throttle can be feathered for speed control
■Simple face-type reversing valve simplifies maintenance
■Forged hammer and anvil for greater durability
■Rotor bearings and steel motor end plates fit either end
of motor, reducing spare parts inventory and repair time.
Cleco impact wrenches feature a unique oil-foam bath
that provides positive lubrication for the hammer, anvil
and other working parts.
The system is designed so that if the
impact mechanism runs low on 30 wt.
oil, the tool will stop running, thus eliminating
one of the major causes of impact wrench failure ...
lack of lubrication. By simply refilling the oil reservoir, the
tool can be returned to service.
Other impact wrenches soon throw off grease; run dry
causing extra wear that shortens tool life and increases
maintenance cost.
Steel anvil housing gives added
strength and durability
“Through-bolts” provide a stronger unitized
assembly, eliminate stripped housing threads
Exclusive breakaway trigger extends
handle assembly life
Positive lock
socket retainer
Filler hole
for oil-foam
bath for
positive
lubrication
of hammer,
anvil, other
working
parts
Heavy-duty telescoping impact
mechanism delivers more power
Sand cast housing for durability
Built-in muffler has serviceable
baffle plates for quieter operation
46
Built-in oiler for
motor lubrication
Bolt Selection Chart
The Impact Wrench Bolt Selection Chart will assist you in selecting impact wrenches for specific applications. Torque and tension figures are
based on 70% of the proof load of a given size and grade UNC bolt. Torque values are based on non-lubricated (dry) conditions. Bolt grades
and sizes are those which are the most commonly secured with impact wrenches.
SAE Grade 1
Bolt Diameter
1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8” 1” 1-1/8”
1-1/4”
1-3/8” 1-1/2”
1-5/8”
1-3/4”
Torque Ft.-lb. 3 6 11 18 28 43 55 97 155230340480660860 – –
Nm 4.1 8.1 15 24 38 58 75 132210312460650900
1,170 – –
Tension
lb.
730 1,210 1,800 2,460 3,280 4,200 5,200 7,000 10,00014,00018,20023,00028,00034,600 –
–
kN 3.24 5.38 8.0 10.914.618.723.131.147.162.3 81 102 126 154 – –
W-200
1/2” sq.
3/8” sq.
WP-455
1/2” sq.
WP-2050 & WP-2049
3/4” sq.
5/8” sq.
WP-2060 & WP-2059
1” sq. & #4 spline
3/4 sq.
W-2110 & W-2109
#5 spline
1” sq.
W-2120 & W-2119
1-1/2” sq.
#5 spline
SAE Grade 5
Bolt Diameter
1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8” 1” 1-1/8”
1-1/4”
1-3/8” 1-1/2”
1-5/8”
1-3/4”
Torque Ft.-lb. 8 16 28 46 70 1101402504056007701.080
1,470
1,950 – –
Nm 10.821.738 62 95 1491903405508101,040
1,460
1,930
2,640 – –
Tension
lb.
1,900 3,100 4,600 6,350 8,450 10,90013,50020,00027,40036,00041,00052,00064,00077,000 –
–
kN 8.4 13.820.428.237.648.5 60 89 122160182231285342 – –
W-200
1/2” sq.
3/8” sq.
WP-455
1/2” sq.
WP-2050 & WP-2049
5/8” sq.
3/4” sq.
WP-2060 & WP-2059
1” sq. & #4 spline
3/4 sq.
W-2110
& W-2109
#5 spline
W-2120
& W-2119
SAE Grade 8 / ASTM-A354 Grade BD
Bolt Diameter
1” sq.
1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8”
1” 1-1/8”
1-1/4”
1-1/2” sq.
#5 spline
1-3/8”
1-1/2”
1-5/8”
1-3/4”
Torque Ft.-lb. 11 23 40 65 99 1591983505668481,245
1,750
2,375
3,135 –
Nm 14.931.254.2 88 1342162684757671,150
1,690
2,370
3,220
4,250 –
Tension
lb.
2,740 4,400 6,510 8,930 11,92015,29018,98028,05038,80050,90066,36084,000103,570
125,330 –
kN 12.219.628.939.7 53 68 84.4125172226295374461557 –
W-200
–
–
–
–
1/2” sq.
3/8” sq.
WP-455
1/2” sq.
WP-2050 & WP-2049
5/8” sq.
3/4” sq.
W
P-2060 & WP-2059 1 ” sq. & #4 spline
3/4 sq.
W-2110
& W-2109
1” sq.
#5 spline
W-2120
& W-2119
ASTM
A325*
#5 spline
1-1/2” sq.
Bolt Diameter
1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8” 1” 1-1/8”
1-1/4”
1-3/8” 1-1/2”
1-5/8”
1-3/4”
Torque Ft.-lb. 1
2003555708501,060
1,495
1,960
2,600 – –
Nm
2714817731,150
1,440
2,030
2,660
3,530 – –
Tension
lb.
10,00028,00039,00051,00056,00071,00085,000103,000 –
–
kN 44.5124173227249316378458 – –
WP-2050 3/4” sq.
WP-2060
1” sq. 7 #4 spline
WS-2110
#5 spline
WS-2120
ASTM A490*
#5 spline
Bolt Diameter
1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8” 1” 1-1/8”
1-1/4”
1-3/8” 1-1/2”
1-5/8”
1-3/4”
Torque Ft.-lb. 1
2504357151,070
1,580
2,125
2,780
3,700 – –
Nm
3395909701,451
2,125
2,882
3,770
5,020 – –
Tension
lb.
24,00035,00049,00064,00080,000102,000
121,000
148,000 –
–
kN 107156218285356454538658 – –
WP-2050 3/4” sq.
WP-2060 1” sq. 7 #4 spline
WS-2110
#5 spline
WS-2120
#5 spline
*Note: ASTM-325 and ASTM A490 bolts are used on structural steel applications. Torque and tension values are based on running the nut beyond the proof load of
the bolt by the turn-of-the-nut method. For detailed information, consult the bolt manufacturer.
47
Impact Wrenches
Inline, Pistol Grip & Spade Handle
WL & WP Series
Torque Range:
20 - 2450 Nm
15 - 1800 Ft. Lbs
Bolt Size:
M10 – M30
7/16” – 1 1/2”
WL-200-3
■ Lever and trigger start
■ Reverse or forward bias
■ 6” extended and spline drives available
WP-255-3P
WP-455-4P
WP-2049-6
WT Series Spade Handle
Torque Range:
Bolt Size:
1000 - 4000 Nm
M30 – M36
750 - 3000 Ft. Lbs
1 3/8” – 1 1/2”
■ Inside or outside lever
■ Positive lock socket retainer
(spline drive)
■ Multiposition dead handle
■ Oil foam bath
■ Reverse or forward bias
WTS-2119
48
WT-2109-8
Bolt Size
Model Number
Gr. 5
Gr. 9.8
Square
Drive
in.
mm
in.
Recommended
Torque Range
ft.-lbs.
Impacts Free
Speed
per
Minute RPM
Nm
Length
in.
mm
lbs.
Air Consumption
Side to
Center
Weight
kg
in.
NPT
mm
Hose
I.D.
SCFM
Inline – Lever Start
WL-200-3
WL-200-4
7/16
1/2
M10
M10
3/8
1/2
15-50
15-60
20-68
20-81
3,200
3,200
3,000
3,000
8.5
8.5
216
216
3.1
3.4
1.4
1.5
1
1
25
25
1/4”
1/4”
1/4”
1/4”
18
18
3/8
60-75
80-100
1/2
37-370
50-502
1/2
37-370
50-502
3/4 125-600 170-800
3/4 250-700 350-950
1 250-900 350-1200
1 750-1650 1000-2250
1,150
1,400
1,400
1,000
1,000
1,000
880
9,500
6,500
6,500
6,000
4,000
4,000
4,600
5.7
7
7
6.4
7.8
7.8
9.5
145
176
176
162
197
197
241
2.6
5.3
5.3
7.8
12
12.1
20.8
1.2
2.4
2.4
3.5
5.4
5.5
9.4
1
–
–
1.6
1.8
1.8
2.2
25
–
–
42
46
46
56
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
30
40
40
45
60
60
100
6,200
4,000
4,000
4,000
4,300
4,300
6.4
7.8
7.8
13.8
9.5
9.8
162
197
197
350
241
248
7.8
12
12.1
14.3
20.8
21.3
3.5
5.4
5.5
6.5
9.4
9.6
1.6
1.8
1.8
1.8
2.2
2.2
42
46
46
46
56
56
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
45
60
60
60
100
100
Pistol Grip – Trigger Start
WP-255-3P
WP-455-4R
WP-455-4P***
WP-2050-6
WP-2060B-6
WP-2060B-8
WP-2110B-8
7/16
1/2
1/2
7/8
1 1/8
1 1/8
1 3/8
M10
M20
M20
M20
M24
M24
M30
Pistol Grip – Trigger Start – Biased Reverse Power****
WP-2049-6
WP-2059-6
WP-2059-8
WP-2059-8-6E**
WP-2109B-8
WPS-2109B
7/8
1 1/8
1 1/8
1 1/8
1 3/8
1 3/8
M20
3/4 125-550 170-750
M24
3/4 250-700 350-950
M24
1 250-800 350-1100
M24
1 250-750 350-1000
M30
1 750-1650 1000-2250
M30 #5 Spl. 750-1800 1100-2450
General:
Tool performance rated at 90 psi (620kPa) air pressure.
*Quick change chuck
**6” Extended spindle
*** Pin retainer
****Breakaway torque capacity in reverse:
2049 Series: 750 ft-lbs. (1000 Nm)
2059 Series: 1200 ft-lbs. (1600 Nm)
2109 Series: 2500 ft-lbs. (3400 Nm)
Model Number
Inside Trigger
Outside
Trigger
Optional Equipment:
86909 Suspension bail for WL-200.
Additional accessories: Pages 63
Standard Equipment:
Operating instructions & service manual
Suitable for
Bolt Size
in.
1,000
1,000
1,000
1,000
880
880
mm
Square
Drive
in.
Recommended
Torque Range
ft.-lbs.
Nm
Impacts Free
Speed
Per
Minute RPM
Length
in.
Weight
mm
lbs.
kg
Side to
Center
in.
mm
Air Consumption
SCFM
NPT Hose
I.D.
Trigger Start - Spade Handle
WT-2110-8
1 1/2 M30
1 750-1650 1000-2250
WTS-2120
1 1/2 M36 #5 Spl. 1200-2800 1600-3800
WT-2120-12 W-2120-12 1 1/2 M36
1 1/2 1200-3000 1600-4000
880 4,600 12.9
850 3,300 14.3
850 3,300 14.3
327
21 9.5
362 27.6 12.5
362 27.6 12.5
2.2
2.3
2.3
56 1/2” 1/2”
59 1/2” 5/8”
59 1/2” 5/8”
100
105
105
880
880
820
820
327
21 9.5
333 21.5 9.8
362
29 13.1
362
29 13.1
2.2
2.2
2.3
2.3
56
56
59
59
100
100
105
105
Trigger Start - Spade Handle - Biased Reverse Power**
WT-2109-8
W-2109-8
WTS-2109
WT-2119-12
WTS-2119
WS-2119
1 3/8
1 3/8
1 1/2
1 1/2
M30
1 750-1650
M30 #5 Spl. 800-1800
M36
1 1/2 1200-2600
M36 #5 Spl. 1200-2500
*6” Extended spindle
**Breakaway torque capacity in reverse:
2109 Series: 2500 ft-lbs. (3400 Nm)
2119 Series: 3500 ft-lbs. (4700 Nm)
General:
Tool performance rated at 90 psi (620kPa) air pressure.
1000-2250
1100-2450
1600-3500
1600-3400
Standard Equipment:
Operating instructions & service manual
Dead handle bracket
Dead Handle
4,300
4,300
3,300
3,300
12.9
13.1
14.3
14.3
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
Optional Equipment:
Additional accessories: Pags 63
49
General Accessories
Balance Arms
Screwdriver balance arms
absorb torque, support weight
and improve productivity.
Cleco balance arms are engineered to deliver
longer service life using durable components,
rugged design and operator-sensitive features.
These arms absorb the torque produced by the
screwdriver, eliminating torque reaction to the
operator. Balanced by springs or air cylinders,
the arm and not the operator supports the weight
of the tool. By reducing the fatigue factors, the
operator productivity is improved.
Tool movement and placement over the fastener is
virtually effortless since most moving parts of the
balance arm are mounted on ball bearings. Access
to the tool is easily changeable by adjusting the
springs or cylinder supporting the forearm.
Arm components and materials are selected for
strength and rigidity. Precision aluminum sand
castings used in the articulating arm section are
light but sturdy.
Over 25 models of the Cleco screwdriver balance
arms are available. Air cylinder models are capable
of supporting tools weighing up to 10 lbs. (4.5 kg.).
Spring models will support tools weighing up to 5
lbs. (2.3 kg.). Both styles have torque capacities of
10 ft. lbs. (13.5 Nm). Arms can be post mounted,
wall mounted or mounted on an adjustable height
post. Tool holders for all models will accommodate
most major brands of air tools...straight and pistol.
Tool Holders
Selecting the proper tool holder for the tool used
on Cleco balance arms enhances the ergonomic
benefits of the arm. Tool holders allow the tool to
swing, swivel and rotate, enabling the operator to
work more comfortably and productively.
Standard and extended tool holders are available
for parallel balance arms. Both models hold the
tool perpendicular to the work, and are ideal for
self-tapping and thread forming applications. Tool
diameter capacity is up to 1 3/4 inch (45mm).
Manifold tool holders used on SBA and CSBA
balance arms suspend the tool from the air inlet.
They allow the tool to swing (or swivel when
equipped with the optional swivel assembly) for
ease of tool movement.
50
General Accessories
Balancers
200427
Ergonomic Tool Balancers
Capacity:
0.5 - 20.5 kg
1.0 - 45 Lbs.
PL-12A
External tension adjustment
■ 360° Swivel
■ Retracting in-line cable
ZBL-6A
BM-13A
Model
Number
Lock Feature
Capacity
lbs.
“A”
“B”
“C”
Weight
kg
in.
mm
in.
mm
in.
mm
lbs.
kg
5.5-0.5
6.8
171
5.1
130
2.3
58
–
–
.9-0
1.8-.9
2.3-1.4
10.9
10.9
10.9
277
277
277
4.4
4.4
4.4
112
112
112
1.6
1.6
1.6
41
41
41
1.3
1.3
1.3
0.6
0.6
0.6
0.9-0.5
1.8-0.9
10.4
10.4
263
263
4.0
4.0
102
102
2.2
2.2
56
56
1.1
1.1
0.5
0.5
2.7-1.8
2.7-1.8
3.6-2.7
3.6-2.7
12.9
12.9
12.9
12.9
327
327
327
327
5.5
5.5
5.5
5.5
140
140
140
140
3.1
3.1
3.1
3.1
79
79
79
79
3.3
3.3
3.3
3.3
1.5
1.5
1.5
1.5
13.8
13.8
13.8
350
350
350
6.9
6.9
6.9
175
175
175
4.5
4.5
4.5
114
114
114
9.0
9.0
9.0
4.1
4.1
4.1
20.7
20.7
20.7
527
527
527
7.8
7.8
7.8
197
197
197
6.6
6.6
6.6
169
169
169
19
19
19
8.6
8.6
8.6
Light Duty – 4.6 ft. (1.4m) Cable Travel
PL-12A
–
12.0-1.0
Light Duty – 5.0 ft. (1.5m) Cable Travel
200427
200428
200429
–
–
–
2.0-0
4.0-2.0
5.0-3.0
Light Duty – 5.2 ft. (1.6m) Cable Travel
BL-2A
BL-4A
–
–
2.0-1.0
4.0-20
Light Duty – 6.7 ft. (2.0m) Cable Travel
BL-6A
BLL-6A
BL-8A
BLL-8A
–
Ratchet
–
Ratchet
6.0-4.0
6.0-4.0
8.0-6.0
8.0-6.0
Medium Duty – 6.6ft. (2.0m) Cable Travel
BM-13A
BML-13A
BM-18A
Automatic
Automatic/Ratchet
Automatic
13-9.0
13-9.0
18-13
5.9-4.1
5.9-4.1
8.2-5.9
Medium Duty – 6.0ft. (1.8m) Cable Travel
BM-25A
BM-35A
BM-45A
Automatic
Automatic
Automatic
25-18
35-25
45-35
11.4-8.2
15.9-11.4
20.5-15.9
51
General Accessories
Air Cylinder & Spring Balance Arms
■ Ball bearing construction
■ Supports tools weighing up to
5 lbs. (spring models) or up to
10 lbs. (air cylinder models).
Air Cylinder
Single Arm Post
CPBA-18
■ Post, wall, or adjustable height
post mounting
■ Single or parallel arms
Air Cylinder
Parallel Arm
Adjustable Height
CPBA-18-AH
Spring
Parallel Arm Post
PBA-18
Post mounting template
Spring
Single Arm
Adjustable Height
SBA-18-AH
TOOLS NOT INCLUDED
52
Single Arms
Model No.
Ordering No.
Parallel Arms
Model No.
Ordering No.
Dimensions
A
B
C
D
in.
mm
in.
mm
in.
mm
in.
mm
12
12
12
12
12
12
12
305
305
305
305
305
305
305
18
24
30
12
18
30
30
457
610
762
305
457
762
762
18
18
18
-
457
457
457
-
30
30
30
-
762
762
762
-
Air Cylinder Models
CSBA18
CSBA-24
CSBA-30
CSBA-12-AH
CSBA-18-AH
CSBA-30-AH
520160
520200
520201
520165
520162
520167
CPBA-18
520170
CPBA-30
CPBA-12-AH
CPBA-18-AH
CPBA-30-AH
CPBA-30-WM
520203
520178
520172
520175
520207
Standard Equipment
Operating Instructions and Service Manual.
Regulator for Air Cylinders.
Threaded Nipples for CSBA Models
1/4 NPT Hex Nipple: 204032
1/4 NPT x 1/8 NPT Hex Reducer
Nipple: 204137
AH = Adjustable Height
WM = Wall Mounted
Tool weight capacity: 10 lbs. (4.6 kg)
Torque capacity: 10 ft. lbs. (13.5 Nm)
Single Arms
Model No.
Ordering No.
Optional Equipment
Additional accessories: See page 62.
Parallel Arms
Model No.
Ordering No.
Dimensions
A
B
C
D
in.
mm
in.
mm
in.
mm
in.
mm
12
12
12
12
12
12
12
18
12
12
305
305
305
305
305
305
305
457
305
305
12
18
24
12
18
24
30
18
12
30
305
457
610
305
457
610
762
305
305
762
18
18
18
-
457
457
457
-
30
30
30
30
30
-
762
762
762
762
762
-
Spring Models
SBA-12
SBA-18
520001
520004
SBA-12-AH
SBA-18-AH
SBA-24-AH
SBA-30-AH
520003
520006
520110
520044
SBA-30-WM
520043
AH = Adjustable Height
WM = Wall Mounted
Tool weight capacity: 5 lbs. (2.3 kg)
Torque capacity: 10 ft. lbs. (13.5 Nm)
PBA-12
PBA-18
PBA-24
PBA-12-AH
PBA-18-AH
PBA-24-AH
PBA-30-AH
PBA-18-18-AH
PBA-12-WM
520007
520010
520045
520009
520012
520047
520050
520036
520008
Standard Equipment
Operating Instructions and Service Manual.
Threaded Nipples for SBA Models
1/4 NPT Hex Nipple: 204032
1/4 NPT x 1/8 NPT Hex Reducer
Nipple: 204137
Optional Equipment
Additional accessories: See page 62.
Balance Arm Operating Envelope
R1 MAX R1 MIN R2 MAX R2 MIN H MAX H MIN
MODEL
in. mm in.mm in. mm in.mm in. mm in.mm
SBA-12 24 610 2 51 18 457 8 203 15381 6 152
SBA-18 30 762 6 152 20 508 7 178 15381 0 0
PBA-12 26 660 3 76 20 508 7 178 17432 8 203
PBA-18 32 813 8 203 22 559 6 152 17432 2 51
R1 MAX
XXBA-XX-XX-XX
Series
CS – Air cylinder,
single arm
S – Spring,
single arm
CP – Air cylinder,
parallel arm
P – Spring,
parallel arm
Tool Type
BA – Balance Arm
Arm Extension
12”24”
18”30”
(12” unless specified)
R1 MIN
Mount
-
–Post
AH – Adjustable Height
WM – Wall Mount
Adjustable Arm Extension
12”24”
18”30”
H MAX
H MIN
R2 MAX
R2 MIN
53
General Accessories
Air Cylinder & Spring Balance Arm Accessories
Single Arm Tool Holders
Part Number
Description
201690*
201601*
Manifold tool holder
Swivel manifold tool holder
201601
201690
*Use of 201601 requires 201690.
TOOLS NOT
INCLUDED.
Parallel Arm Tool Holders
Part Number
Description
201675
204167
201607
201608
Parallel tool holder
Extended parallel tool holder
Swivel tool holder (small)
Swivel tool holder (large)
204167
201675
204120
201607
201608
TOOLS NOT INCLUDED.
204119
204122
204014
Articulating Arm Extensions
Part Number
Length (inches)
204014
204122
204119
204120
12
18
24
30
Conversion Kits for Cleco
Screwdriver Balance Arms
To Convert Balance Arms
From
To
SBA-12
SBA-18
Spring
SBA or PBA
Standard Duty
PBA-12*
PBA-18*
Cylinder
SBA or PBA
Heavy Duty**
Part No.
521041
521042
201606
521060
* Conversion kits for -24 and -30 models are available upon request.
** Has four springs to support heavier tools or longer arms.
54
General Accessories
Air Hoses
Part
Number
A139856
45-1307
45-1408
45-1409
45-1508
45-1610
45-1810
45-1812
45-1825
Quick Disconnect Fittings
Hose I.D.
Fittings (NPT)
Length
in.
mm
in.
mm
ft.
m
3/16
3/16
1/4
1/4
5/16
3/8
1/2
1/2
1/2
4.7
4.7
6.4
6.4
7.9
9,5
12.7
12.7
12.7
1/8
1/8
1/4
1/8
1/4
3/8
3/8
1/2
1/2
1/8
1/4
1/4
1/4
1/4
3/8
1/2
1/2
1/2
6.0
7.0
8.0
8.0
8.0
10
10
12
25
1.8
2.1
2.4
2.4
2.4
3.0
3.0
3.7
7.6
Fitting Type*
Nominal Size
3/8”
1/2”
45-0710
–
–
45-0711
45-0713
–
3/8
45-0712
–
–
1/2
–
–
45-0717
NPT
in.
1/4”
1/8
1/4
Coupler (male NPT)
Coupler (female NPT)
1/4
–
–
–
3/8
45-0732
45-0734
45-0736
1/8
45-0720
–
–
1/4
–
45-0724
–
3/8
45-0722
45-0725
45-0726
1/2
–
–
45-0727
Nipple (male NPT)
General: 3/16” & 1/4” hoses have braided covers, all others have neoprene covers.
*Note: 3/8”-24 is a straight thread
Nipple (female NPT)
1/4
–
45-0744
–
3/8
45-0742
45-0745
45-0746
1/2
–
–
45-0747
Nipple (with hose barbs)
Activeswivel
Part No.
SW-102
SW-103
SW-104
SWR-102*
NPT
in.
1/4
3/8
1/2
1/4
Air Flow
SCFM
m3/min
25
45
65
25
7.1
12.7
18.4
7.1
Max. Pressure
psig
bar
150
150
150
150
10.4
10.4
10.4
10.4
Weight
lbs.
kg
0.20
0.40
0.80
0.25
0.09
0.18
0.36
0.11
1/4**
45-0748
–
–
1/2**
–
–
45-0753
* NOTE: Nipples of one size will not fit couplers of another size.
** NOTE: Indicates inside diameter of hose.
NOTE: 1/4” nominal will pass 49 cfm free air @ 90 psi, but pressure drop
exceeds 10 psi with air flow over 30 cfm.
3/8” nominal will pass 90 cfm free air @ 90 psi, but pressure drop exceeds 10 psi
with air flow over 53 cfm.
1/2” nominal will pass 168 cfm free air @ 90 psi, but pressure drop exceeds 10
psi with air flow over 109 cfm.
* NOTE: Equipped with built-in flow regulator.
Lubricants
Part Number
Size
Description
M.S.D.S. No.
540397
533485
536333
45-0918
45-0919
539317
1 qt. plastic
1 gal. metal
1 gal. metal
1 qt. plastic
1 gal metal
1 qt. plastic
Air line oil
Air line oil
High film strength
Air line oil (Dotco)
Air line oil (Dotco)
Hydraulic oil (Pulse)
CPT-153
CPT-153
CPT-154
CPT-155
CPT-155
CPT-157
513156
540394
45-0983
45-0980
18 oz. can
2.8 oz. tube
2 oz. tube
2 oz. tube
Teflon grease
Teflon grease
Dotco gear grease
Dotco gear lube
CPT-145
CPT-145
CPT-147
CPT-148
Oils
Greases
NOTE: Under normal conditions of use, lubrication products sold separately
for or used within these tools should not cause an exposure hazard.
Refer to the Material Safety Data Sheet (M.S.D.S.) for Safety and Disposal
information. M.S.D.S. sheets shown in the chart are available upon request
from Cooper Tools.
Push Type Grease Gun
Part Number: 45-1982
55
General Accessories
Apex Fastener Tools
Quality Fastener Tools
For more than half a century Apex has maintained the position of world leader in industrial
fastening tools. Many power and insert bits,
socket combinations and other drivers/adapters
pioneered by Apex have today become industry standards, while Apex quality, service and
selection give you unsurpassed value.
■ More Quality For Your Money
Apex quality starts with the selection of raw
materials. Only carefully chosen, high grade
tool steel is used to make Apex industrial
fastener tools. Next, each tool is precision
machined from solid bar stock to exacting
standards of accuracy. You always get a
snug, secure fit – a fit that is not possible from
stamped tools.
Finally, each Apex fastener tool is tempered
with our exclusive heat treating process. During
this step the degree of hardness is determined
based upon the application.
■ Fast Delivery
All Apex standard catalog items are available
off-the-shelf for immediate delivery. If you need
special assistance with your order, your Apex
manufacturer’s representative can handle any
questions your may have.
■ Special Orders
Apex offers the broadest selection of screw
driver and nut runner tools available, from
bits, sockets and universal wrenches to
extensions, adapters and nut setters. If you
have a special application, contact your Apex
representative. We may have what you need
in stock, or can design and produce special
fastener tools for almost any application.
POZIDRIV®
®
SQUARE
TORQ-SET
RECESS
ACR®
TRI-WING®
CLUTCH HEAD
SLOTTED
SOCKET HEAD
SEL-O-FIT®
PHILLIPS ACR®
TORQ-SET®
FREARSON
TORX®
®
PHILLIPS
HI-TORQUE®
■ Ordering Information
Apex products are distributed world-wide.
For a catalog of the complete line of Apex
quality fastener tools or to locate your
nearest Apex distributor, visit our website at
www.apex-tools.com.
Registered Trade Marks: HI-TORQUE, Voi-Shan; TORX, Camcar Division of Textron; ACR, POZIDRIV, TORQ-SET and TRI-WING, Phillips International Co.; SUPADRIV, EIS (Fasteners) LTD.; SEL-OFIT, FLIP-TIP, and Apex, Apex Tool Group, LLC.
56
Insert Bits
Insert Bits
(1/4” hex for socket head cap screws and set screws)
Used with Bit Holders
(all bits are 1.0” (25.4 mm) long)
A
Point
Size
“A”
Part
Number
Hex Size
(in.)
in.
mm
Cap
Screw
Set
Screw
185-00
185-0
185-1
185-9
185-2
185-10
185-3
185-4
185-5
185-6
185-7
185-8
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
3/8
1.00
1.00
1.00
1.00
1.00
1.00
1.31
1.31
1.31
1.31
1.25
1.25
25.4
25.4
25.4
25.4
25.4
25.4
33.3
33.3
33.3
33.3
31.8
31.8
1
2.3
4.5
6
8
8
10
1/4
—
5/16
3/8
7/16, 1/2
5.6
8
10
—
1/4
—
5/16
3/8
7/16
1/2
5/8
3/4
Square Drive Adapter
B
(1/4” hex drive sockets) Use with
Quick Change and Bit & Finder
Models, except as noted.
Part
Number
EX250-2
EX250-3
EX250-4
EX250-6
EX370
EX370-3
EX500-2
EX500-3
A
“B”
“A”
Sq. Drive
in.
mm
Bushing
Number
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
2.00
3.00
4.00
6.00
1.63
3.00
2.00
3.00
50.8
76.2
101.6
152.4
41.3
76.2
50.8
76.2
–
847295*
–
–
–
847295*
–
–
*Note: Required for bit and finder models.
Hex Extensions
Part
Number
Hex
Drive (in.)
Type of
Lock
Overall Length
in.
mm
Male Hex Drive with 1/2” Male Square
EX-501-3
EX-501-4
EX-501-6
7/16
7/16
7/16
Pin
Pin
Pin
3
4
6
76
102
152
Male Hex Drive with 3/8” Male Square
EX-371-3
EX-371-4
EX-371-6
7/16
7/16
7/16
Pin
Pin
Pin
3
4
6
76
102
152
Hex Drive Nutsetters
Part
Number
Size
(in.)
Overall
Length (in.)
Socket Nose
Diameter (in.)
1/2
1/2
9/16
9/16
5/8
5/8
3
4
3
4
3
6
13/16
13/16
7/8
7/8
1
1
7/16” 6 Point
6N-1416-3
6N-1416-4
6N-1418-3
6N-1418-4
6N-1420-3
6N-1420-6
0
1
2
3
Part Number
Phillips
Pozi-Drive
446-0 446-1P2D
HPL-1 440-1PZD
HPI-2 440-2PZD
HPI-3 440-3PZD
Wood
Flat & Oval
Round
0.1
0.1
2-4
2-4
5-8
5-10
10-16 12-16
Machine & Self-Tapping
Flat, Oval & Pan
0.1
2-4
5-10
12-16
Fillister
Truss
Binding
0.1
0.1
0.1
2-4
2-4
2-4
5-10 6-10 5-10
12-5/16 12-16 12-1/4
6 Point Sockets
Part No.
Hex
Opening
Overall
Length
Nose End Drive End
Diameter Diameter
3/8” Square Drive Sockets, SAE
3112
3/8
1 1/4
19/32
3114
7/16
1 1/2
11/16
3116
7/16
1/2
1 1/2
3118
7/16
9/16
1-1/2
1/2” Square Drive Sockets, SAE
5112
3/8
1 1/2
5/8
5114
7/16
1 1/2
11/16
5116
1/2
1 1/2
13/16
5120
5/8
1 1/2
1
5122
11/16
1 1/2
1 1/8
5124
3/4
1 1/2
1 1/8
3/4” Square Drive Sockets, SAE
7128
7/8
2
1 1/2
7132
1
2
1 5/8
7136
1 1/8
2 1/8
1 3/4
7140
1 1/4
2 1/8
2
7144
1 3/8
2 1/8
2 1/8
7148
1 1/2
2 1/4
2 1/4
1” Square Drive Sockets, SAE
8132
1
2 1/8
1 5/8
8140
1 1/4
2 1/8
2 1/8
8144
1 3/8
2 1/8
2 1/8
8148
1 1/2
2 1/4
2 1/4
8156
1 3/4
2 3/8
2 5/8
8164
2
2 5/8
3
1 1/2” Square Drive Sockets, SAE
9156
1 3/4
2 7/8
2 7/8
9160
1 7/8
3
3 1/8
9164
2
3 1/8
3 1/4
9172
2 1/4
3 1/4
3 3//8
3/8” Square Drive Sockets, Metric
12mm13
12
38.1
19.1
14mm13
14
38.1
22.2
16mm13
16
38.1
23.8
1/2” Square Drive Sockets, Metric
16mm15
16
38.1
25.4
18mm15
18
38.1
28.6
20mm15
20
38.1
31.7
22mm15
22
38.1
33.3
5/8” Square Drive Sockets, Metric
24mm16
24
51
38.1
3/4” Square Drive Sockets, Metric
28mm17
28
54
44.4
30mm17
30
54
47.6
32mm17
32
54
50.8
34mm17
34
54
54.0
36mm17
36
57
57.1
1” Square Drive Sockets, Metric
32mm18
32
54
54.0
34mm18
34
54
54.0
36mm18
36
57
57.1
38mm18
38
57
57.1
42mm18
42
60
63.5
46mm18
46
64
69.8
Opening
Depth
3/4
3/4
13/16
7/8
1/4
9/32
11/32
7/16
15/16
15/16
15/16
1
1 1/8
1 1/8
1/4
9/32
11/32
7/16
7/16
15/32
1 1/2
1 5/8
1 3/4
1 3/4
2 1/8
2 1/8
9/16
5/8
3/4
13/16
13/16
1
2
2 1/8
2 1/8
2 1/8
2 5/8
2 5/8
13/16
13/16
13/16
15/16
11/16
1 3/16
3
3
3 1/4
3 1/4
1 1/8
1 1/4
1 3/8
1 1/2
19.1
22.2
23.8
7.2
11.1
11.1
25.4
28.6
31.7
33.3
11.1
11.1
11.9
14.3
38.1
15.9
44.4
44.4
44.4
54.0
54.0
19.1
19.1
20.6
20.6
23.8
54.0
54.0
54.0
54.0
54.0
66.7
20.6
20.6
23.9
23.9
23.9
26.9
57
General Accessories
Apex µ-Guard
Quality Anti-Mar Fastener Tools
Begin With Quality Fastener Tools.
Prevents Side Impact Damage
Apex µ-Guard™ provides a protective barrier
between genuine Apex fastener tools and your finely
finished workpiece. The free-spinning patent-pending
design provides maximum protection for polished and
highly sensitive surfaces.
Apex µ-Guard™ covering is made of a thermo plastic
urethane (TPU elastomer) which cushions against
costly incidental side impacts. It offers the lowest
coefficient of friction for maximum tool efficiency. It is
also non-removable for tamper resistance.
With Apex µ-Guard™ you get the proven Apex
fastener tool fit and performance plus the best
protection available against marring and in-system
damage.
Free-Spinning Design
µ-Guard™ is your guard against the potential hazards
caused by rotational friction.
Virtually Damage Free
If it doesn’t say Apex
on the outside, how can
you be sure of what’s
on the inside?
58
µ-Guard Sockets
(Includes socket and cover)
Part Number
UGS-AB710
UGS-AB710-01
UGS-AB710-02
UGS-BA610
UGS-BA610-01
UGS-BB710
UGS-BB710-01
UGS-BB710-02
UGS-BB713
UGS-BB713-01
UGS-BB713-02
UGS-CB713
UGS-CB713-03
UGS-CB715
UGS-CB715-03
UGS-CB718
UGS-CB718-03
Socket
10MM21
M-10MM21
MB-10MM21
10MM13
M-10MM13
10MM23
M-10MM23
MB-10MM23
13MM23
M-13MM23
MB-13MM23
13MM25
SF-13MM25
15MM25
SF-15MM25
18MM25
SF-18MM25
Size
Drive End
Type
Sex
Socket
Length
Size
Fastener End
Type
Sex
Assembly
Features
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
standard
standard
standard
standard
standard
long
long
long
long
long
long
long
long
long
long
long
long
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
13 mm
13 mm
13 mm
13 mm
13 mm
15 mm
15 mm
18 mm
18 mm
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
FS
FS, M
FS, M, B
FS
FS, M
FS
FS, M
FS, M, B
FS
FS, M
FS, M, B
FS
FS, SF
FS
FS, SF
FS
FS, SF
If your tool is not shown in the table of representative products above, please contact your Apex representative.
µ-Guard Extensions
(Includes extension and cover)
Part Number
UGE-A2A
UGE-A4A
UGE-A6A
UGE-B2A
UGE-B4A
UGE-B6A
UGE-B3C
UGE-B6C
UGE-B12C
UGE-C4C
UGE-C8C
UGE-C12C
Extension
EX-250-2
EX-250-4
EX-250-6
EX-370-2
EX-370-4
EX-370-6
EX-376-3
EX-376-6
EX-376-12
EX-508-4
EX-508-8
EX-508-12
Size
Drive End
Type
Sex
Extension
Length
Size
Socket End
Type
Sex
Assembly
Features*
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
Hex
Hex
Hex
Hex
Hex
Hex
Square
Square
Square
Square
Square
Square
M
M
M
M
M
M
F
F
F
F
F
F
2
4
6
2
4
6
3
6
12
4
8
12
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
M
M
M
M
M
M
M
M
M
M
M
M
FS
FS
FS
FS
FS
FS
FS
FS
FS
FS
FS
FS
If your tool is not shown in the table of representative products above, please contact your Apex representative.
µ-Guard Bit Holders
(Includes bit holder and cover)
Part Number
UGH-1NAA
UGH-1AAA
UGH-2NBG
UGH-1NBG
UGH-2NBC
UGH-1NBC
UGH-2NBD
UGH-1NBD
UGH-2NCK
UGH-2NCF
UGH-2NCJ
UGH-2NCL
Bit Holder
M-490
M-490-2
838
M-838
835
M-835
855
M-855
QR-308
QR-508
QR-314
QR-514
Size
Drive End
Type
Sex
Socket
Length
Size
Fastener End
Type
Sex
Assembly
Features
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
3/8
1/2
3/8
1/2
Hex
Hex
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
M
M
F
F
F
F
F
F
F
F
F
F
2 31/32
2
1 1/2
2 5/8
1 1/2
2 3/4
1 1/2
2 3/4
1 3/4
2 1/8
2
2 1/8
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
1/4
1/4
7/16
7/16
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
F
F
F
F
F
F
F
F
F
F
F
F
FS, M, ET
FS, M, ET
FS, ET
FS, M, ET
FS, ET
FS, M, ET
FS, ET
FS, M, ET
FS, QR
FS, QR
FS, QR
FS, QR
If your tool is not shown in the table of representative products above, please contact your Apex representative.
*Features Abbreviations
FS Free Spinning Tool is able to rotate independently of Cover
M Magnetic
Tool includes magnet to hold the position of the fastener during
fastening operation
B Bolt Clearance Tool is spring-loaded to allow bolt or nut to retract into the socket body
SF Surface Drive Tool has radiused corners to allow easier alignment and engagement
of fastener
ET Exposed Tip
Cover extends beyond end of Bit Holder to shield the majority of a
standard 1 inch long Insert Bit.
Tip of Insert Bit will not be covered to allow easier fastener engagement.
QRQuick Release Tool has tension feature to allow quick & easy change between bits
Cover will not extend beyond end of Bit Holder
Notes:
Reported lengths are based on uncovered tool length only for reference. Cover may extend
beyond end of tool by 2 mm unless otherwise noted.
59
Conversion Tables
Millimeter – Decimal – Fraction
mm Dec. in.
0.100
0.200
0.300
0.397
0.400
0.500
0.600
0.700
0.794
0.800
0.900
1.000
1.100
1.191
1.200
1.300
1.400
1.500
1.588
1.600
1.700
1.800
1.900
1.984
2.000
2.100
2.200
2.300
2.381
2.400
2.500
2.600
2.700
2.778
2.800
2.900
3.000
3.100
3.175
3.200
3.300
3.400
3.500
3.572
3.600
3.700
3.800
3.900
3.969
4.000
4.100
4.200
4.300
4.366
4.400
4.500
4.600
4.700
4.763
4.800
4.900
5.000
5.100
60
.0039
.0079
.0118
.0156
.0157
.0197
.0236
.0276
.0313
.0315
.0354
.0394
.0433
.0469
.0472
.0512
.0551
.0591
.0625
.0630
.0669
.0709
.0748
.0781
.0878
.0827
.0866
.0906
.0938
.0945
.0984
.1024
.1063
.1094
.1102
.1142
.1181
.1220
.1250
.1260
.1299
.1339
.1378
.1406
.1417
.1457
.1496
.1535
.1563
.1575
.1624
.1654
.1693
.1719
.732
.1772
.1811
.1850
.1875
.1890
.1929
.1969
.2008
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
mm Dec. in.
5.159
5.200
5.300
5.400
5.500
5.556
5.600
5.700
5.800
5.900
5.953
6.000
6.100
6.200
6.300
6.350
6.400
6.500
6.600
6.700
6.747
6.800
6.900
7.000
7.100
7.144
7.200
7.300
7.400
7.500
7.541
7.600
7.700
7.800
7.900
7.938
8.000
8.100
8.200
8.300
8.334
8.400
8.500
8.600
8.700
8.731
8.800
8.900
9.000
9.100
9.128
9.200
9.300
9.400
9.500
9.525
9.700
9.800
9.900
9.922
10.000
10.100
10.200
.2031
.2047
.2087
.2126
.2165
.2188
.2205
.2244
.2283
.2323
.2344
.2362
.2402
.2441
.2480
.2500
.2520
.2559
.2598
.2638
.2656
.2677
.2717
.2756
.2795
.2813
.2835
.2874
.2913
.2953
.2969
.2992
.3031
.3071
.3110
.3125
.3150
.3189
.3228
.3268
.3281
.3307
.3346
.3386
.3425
.3438
.3465
.3504
.3543
.3583
.3594
.3622
.3661
.3701
.3740
.3750
.3819
.3858
.3898
.3902
.3937
.3976
.4016
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
mm Dec. in.
10.300
10.319
10.400
10.500
10.600
10.700
10.716
10.800
10.900
11.000
11.100
11.113
11.200
11.300
11.400
11.500
11.509
11.600
11.700
11.800
11.900
11.906
12.000
12.100
12.200
12.300
12.303
12.400
12.500
12.600
12.700
12.800
12.900
13.000
13.097
13.100
13.200
13.300
13.400
13.494
13.500
13.600
13.700
13.800
13.891
13.900
14.000
14.100
14.200
14.288
14.300
14.400
14.500
14.600
14.684
14.700
14.800
14.900
15.000
15.081
15.100
15.200
15.300
.4055
.4063
.4094
.4134
.4173
.4219
.4219
.4252
.4291
.4331
.4370
.4375
.4409
.4449
.4488
.4528
.4531
.4567
.4606
.4646
.4685
.4688
.4724
.4764
.4803
.4843
.4844
.4882
.4921
.4961
.5000
.5039
.5079
.5118
.5156
.5157
.5197
.5236
.5276
.5313
.5315
.5354
.5394
.5433
.5469
.5472
.5512
.5551
.5591
.5625
.5630
.5669
.5709
.5748
.5781
.5787
.5827
.5866
.5906
.5938
.5945
.5984
.6024
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
mm Dec. in.
15.400
15.478
15.500
15.600
15.700
15.800
15.875
15.900
16.000
16.100
16.200
16.272
16.300
16.400
16.500
16.600
16.669
16.700
16.800
16.900
17.000
17.066
17.100
17.200
17.300
17.400
17.463
17.500
17.600
17.700
17.800
17.859
17.900
18.000
18.100
18.200
18.256
18.300
18.400
18.500
18.600
18.653
18.700
18.800
18.900
19.000
19.050
19.100
19.200
19.300
19.400
19.447
19.500
19.600
19.700
19.800
19.844
19.900
20.000
20.100
20.200
20.241
20.300
.6063
.6094
.6102
.6142
.6181
.6220
.6250
.6250
.6299
.6339
.6378
.6406
.6417
.6457
.6496
.6535
.6563
.6575
.6614
.6654
.6693
.6719
.6732
.6772
.6811
.6850
.6875
.6890
.6929
.6968
.7008
.7031
.7047
.7087
.7126
.7165
.7188
.7205
.7244
.7283
.7323
.7344
.7362
.7402
.7441
.7480
.7500
.7520
.7559
.7598
.7638
.7656
.7677
.7717
.7756
.7795
.7813
.7835
.7874
.7913
.7953
.7969
.7992
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
mm Dec.in.m
20.400
20.500
20.600
20.638
20.700
20.800
20.900
21.000
21.034
21.100
21.200
21.200
21.300
21.400
21.431
21.500
21.600
21.700
21.800
21.828
21.900
22.000
22.100
22.200
22.225
22.300
22.400
22.500
22.600
22.622
22.700
22.800
22.900
23.000
23.019
23.100
23.200
23.300
23.400
23.416
23.500
23.600
23.700
23.800
23.900
24.000
24.100
24.200
24.209
24.300
24.400
24.500
24.600
24.606
24.700
24.800
24.900
25.000
25.003
25.100
25.200
25.300
25.400
.8031
.8071
.8110
.8125
.8150
.8189
.8228
.8268
.8182
.8307
.8307
.8346
.8386
.8425
.8438
.8465
.8504
.8543
.8583
.8594
.8622
.8661
.8701
.8740
.8750
.8780
.8819
.8858
.8898
.8906
.8937
.8976
.9016
.9055
.9063
.9094
.9134
.9173
.9213
.9219
.9252
.9291
.9331
.9370
.9409
.9449
.9488
.9528
.9531
.9567
.9606
.9646
.9685
.9688
.9724
.9764
.9803
.9843
.9844
.9882
.9921
.9961
1.000
13/16
53/64
27/32
55/94
7/8
57/64
29/32
59/64
61/64
31/32
63/64
1
Conversion Tables
Torque – Air Pressure – Miscellaneous
Torque Conversion Factors
To Convert
Into
Multiply By
Inch Pounds
Inch Pounds
Inch Pounds
Inch Pounds
Foot Pounds
Foot Pounds
Foot Pounds
Foot Pounds
Newton Meters
Newton Meters
Newton Meters
Newton Meters
Kg meters
Kg meters
Kg meters
Kg Cm
Kg Cm
Kg Cm
Foot Pounds
Newton meters
Kg-meters
Kg-Cm
Inch Pounds
Newton meters
Kg-meters
Kg-Cm
Inch Pounds
Foot Pounds
Kg-meters
Kg-Cm
Inch Pounds
Foot Pounds
Newton-meters
Inch Pounds
Foot Pounds
Newton-meters
0.0835
0.1130
0.0115
1.1519
12.000
1.3560
0.1382
13.8240
8.8440
0.7370
0.1020
10.2000
86.8100
7.2340
9.8040
0.8681
0.0723
0.0980
Inch Bolt Torque Table
SAE J429 and ASME 574
Socket Head
Cap Screws
Torque in Pound Foot or (Pound Inch)
Steel Grade
Nom Dia Pitch
Torque Conversion – In. Lbs. (Nm)
In. Lbs.
Nm
In. Lbs.
Nm
In. Lbs.
Nm
5
10
15
20
25
30
35
40
45
0.6
1.1
1.7
2.3
2.8
3.4
4.0
4.5
5.1
50
60
70
80
90
100
110
120
130
5.7
6.8
7.9
9.0
10.2
11.3
12.4
13.6
14.7
140
150
160
170
180
190
200
15.8
17.0
18.1
19.2
20.3
21.5
22.6
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
Ft. Lbs.
Nm
Ft. Lbs.
Nm
Ft. Lbs.
Nm
Ft. Lbs.
Nm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
1.36
2.7
4.1
5.4
6.8
8.1
9.5
10.9
12.2
13.6
14.9
16.3
17.6
19.0
20.3
21.7
23.1
24.4
25.8
27.1
28.5
29.8
31.2
32.5
33.9
35.3
36.6
38.0
39.3
40.7
42.0
43.4
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
44.8
46.1
47.5
48.8
50.2
52.0
52.9
54.2
55.6
57.0
58.3
60.0
61.0
62.4
63.7
65.1
66.4
67.8
69.2
70.5
71.9
73.2
74.6
75.9
77.3
78.7
80.0
81.4
82.7
84.1
85.4
86.8
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
88.1
90.0
90.9
92.2
93.6
94.9
96.3
97.6
99.0
100.3
102.0
103.1
104.4
105.8
107.1
108.5
110.0
111.2
112.6
114.0
115.3
117.0
118.0
119.3
121.0
122.0
123.4
125.0
126.1
127.5
129.0
130.2
97
98
99
100
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
225
250
275
300
350
400
131.5
133.0
134.2
135.6
149.2
156.0
163.0
170.0
176.3
183.1
190.0
197.0
203.4
210.2
217.0
224.0
231.0
237.3
244.1
251.0
258.0
264.4
271.2
305.1
339.0
373.0
407.0
475.0
542.4
SAE 8 
Dry
Lubed
Dry
Lubed
Dry
Lubed
(101)
(116)
(209)
(231)
(372)
(420)
49
55
75
85
150
170
267
297
429
474
644
722
(76)
(87)
(157)
(174)
(276)
(312)
37
41
57
64
113
127
200
223
322
355
483
542
(143)
(147)
(295)
(327)
44
49
70
78
106
120
212
240
376
420
606
669
909
1020
(107)
(123)
(221)
(245)
33
37
52
58
80
90
159
180
282
315
455
502
681
765
(168)
(192)
(348)
(384)
51
58
81
91
124
140
238
270
423
472
682
752
1022
1147
(120)
(144)
(264)
(288)
38
43
61
68
93
105
179
202
317
354
511
564
767
860
Metric Bolt Torque Table
ISO 898
8.8  
Property
Class
Nom Size
x Pitch
Torque Conversion – Ft. Lbs. (Nm)
SAE 5
M5 x 0.80
M6 x 1.00
M7 x 1.00
M8 x 1.25
M10 x 1.50
M12 x 1.75
M14 x 2.00
M16 x 2.00
M18 x 2.50
M20 x 2.50
M22 x 2.50
M24 x 3.00
M27 x 3.00
M30 x 3.50
M33 x 3.50
M36 x 4.00
10.9  
12.9 Socket Head
Cap Screw
Torque in Newton Meter - Nm
Dry
Lubed
Dry
Lubed
Dry
Lubed
6.1
10.4
17.6
25.4
50
88
141
218
301
426
580
736
1079
1463
1990
2557
4.6
7.8
13.1
19.1
38
66
106
164
226
319
435
552
809
1097
1493
1918
8.8
15
25.1
37.6
72
126
201
312
431
609
831
1052
1544
2092
2849
3659
6.7
11.2
18.9
27.3
54
94
150
233
323
457
624
789
1158
1570
2137
2744
10.3
17.6
29.4
42.6
84
146
235
365
504
712
971
1231
1805
2446
3328
4276
7.7
13.1
22
32.1
64
110
176
274
378
534
728
923
1353
1834
2497
3208
Lubed means cleaned dry bolts lubricated with a standard medium viscosity 
machine oil. Lubricate all contact areas of the bolts and washers. Lubricating
the bolts is the suggested method.
Miscellaneous Conversion Factors
To Convert
Into
Multiply By
Inches Millimeters 25.4000
Millimeters Inches
0.0394
Pounds Kilograms 0.4536
Kilograms Pounds
2.2050
psi
bar
0.069
bar
psi
14.5
Air Pressure Conversion
PSI
kPa*
Bar**
85
90
95
100
125
586
620
655
690
860
5.9
6.2
6.6
6.9
8.6
*Preferred: Approximate to the nearest 5 kPa.
**Approximate to the nearest 0.5 Bar.
61
Sales & Service Centers
Please note that all locations may not service all products. Please contact the nearest Apex Tool Group Sales &
Service Center for the appropriate facility to handle your service requirements.
D E T R O I T,
LOS ANGELES, CALIFORNIA
C H I N A
G E R M A N Y
Apex Tool Group
Sales & Service Center
2630 Superior Court
Auburn Hills, MI 48326
Tel: (248) 393 5640
Fax: (248) 391 6295
M I C H I G A N
Apex Tool Group
Sales & Service Center
6881 Stanton Avenue, Unit B
Buena Park, CA 90621
Tel: (714) 994-1491
Fax: (714) 994-9576
Cooper (China) Co., Ltd.
An Apex Tool Group, LLC company
955 Sheng Li Road,
Heqing Pudong, Shanghai
China 201201
Tel: +86 21 28994176
Fax: +86 21 51118446
H O U S T O N ,
YO R K ,
Apex Tool Group
GmbH & Co. OHG
Industriestraße 1
73463 Westhausen
Germany
Tel: +49 (0) 73 63 81 0
Fax: +49 (0) 73 63 81 222
E-mail: info@apexpowertools.eu
T E X A S
Apex Tool Group
Sales & Service Center
York Service Center
3990 E. Market Street
York, PA 17402
Tel:(717) 755 2933
Fax: (717) 757 5063
S E AT T L E ,
B R A Z I L
WA S H I N G T O N
Apex Tool Group
Sales & Service Center
2865 152nd Ave N.E.
Redmond, WA 98052
Tel: (425) 497 0476
Fax: (425) 497 0496
L E X I N G T O N ,
Apex Tool Group
Sales & Service Center
Caixa Postal 692
18001-970 Sorocaba, SP
Brazil
Tel: +55 15 2383929
Fax: +55 15 2383260
S C
Apex Tool Group
670 Industrial Drive
Lexington, SC 29072
Tel: (800) 845 5629
Tel: (803) 951 7544
Fax: (803) 358 7681
62
P E N N S Y LVA N I A
Apex Tool Group
Sales & Service Center
6550 West Sam Houston
Parkway North, Suite 200
Houston, TX 77041
Tel: (713) 849 2364
Fax: (713) 849 2047
C A N A D A
Apex Tool Group
Sales & Service Center
5925 McLaughlin Road
Mississauga, Ont. L5R 1B8
Canada
Tel: (905) 501 4785
Fax: (905) 501 4786
E N G L A N D
Apex Tool Group
GmbH & Co. OHG
C/O Spline Gauges
Piccadilly, Tamworth,
Staffordshire B78 2ER
United Kingdom
Tel: +44 1827 8741 28
Fax: +44 1827 8741 28
Apex Tool Group
Hungaria Kft.
Platànfa u. 2
9027 Györ
Hungary
Tel: +36 96 66 1383
Fax: +36 96 66 1135
F R A N C E
M E X I C O
Apex Tool Group SNC
25 rue Maurice Chevalier
B. P. 28
77831 Ozoir-la-Ferrière Cedex
France
Tel: +33 1 64 43 22 00
Fax: +33 1 64 43 17 17
Cooper Tools
de México S.A. de C.V.
An Apex Tool Group, LLC company
Vialidad El Pueblito #103
Parque Industrial Querétaro
Querétaro, QRO 76220
Mexico
Tel: +52 (442) 211 3800
Fax: +52 (442) 103 0443
H U N G A R Y
www.apexpowertools.com
www.apexpowertools.eu
Order Catalogs & Literature On-Line
One Of The Broadest Range Of Tools In The World Is At Your Fingertips!
Apex Tool Group covers a wide range of industrial markets, including aerospace, automotive, foundries,
furniture, general industry, metal fabrication, petroleum, power generation, shipbuilding, and transportation.
These markets have been served by Apex Tool Group’s brands for many decades, by offering our customers
solutions and products that meet their demanding productivity requirements.
To receive a product catalog quickly, just go to www.apextoolgroup.com. Select the literature you want.
Then complete the “Contact Information” form, hit “Submit Request” and your order will be processed
immediately. Materials normally arrive within 48 hours.
Below are a few of our more popular power tools catalogs
Apex Fastener Tools
A comprehensive line of
industrial quality bits,
finders, sockets and
extensions.
(Catalog # TC-100)
www.apex-tools.com
Apex Universal Joints
Industrial quality universal
joints that can be custom
designed for most any
application.
(Catalog # SP-1400)
www.apexuniversal.com
Cleco Pneumatic
Assembly Tools
A full line of industrial
pneumatic assembly
tools from screwdrivers to
nutrunners to impacts.
(Catalog # SP-1000)
www.clecotools.com
Dotco/Cleco Material
Removal Tools
Master Power
Industrial Air Tools
(Catalog # SP-102)
www.dotco-tools.com
(Catalog # SP-904)
www.masterpowertools.com
A full line of pneumatic
material removal tools
including drills, sanders,
and grinders.
DGD
Assembly Systems
A complete line of
spindles, D.C. electric
assembly tools and
controllers for the MVI.
(Catalog # SP-703DE/EN)
www.apexpowertools.eu
Cleco Power Motors
A comprehensive line
of industrial pneumatic
motors for a multitude of
applications.
(Catalog # SP-104)
www.clecotools.com
A complete line of industrial
pneumatic tools for
assembly and material
removal applications.
Utica
Torque Products
A full line of torque
measuring products
including torque
screwdrivers, torque
wrenches and analyzers.
(Catalog # SP-301)
www.uticatools.com
Airetool
Tube Cleaners
& Expanders
A complete line of
industrial tube cleaners,
expanders and installation
tools.
(Catalog # SP-1100)
www.airetools.com
Cleco D.C. Electric
Assembly Tools
A complete line of
industrial D.C. electric
assembly tools and
controllers.
(Catalog # SP-1020)
www.clecotools.com
63
Apex Tool Group, LLC
Warranty
Apex Tool Group, LLC warrants products and parts
sold by it, insofar as they are of its own manufacture,
against defects of material and workmanship,
under normal use and service in accordance with
its written instructions, recommendations, and
ratings for installation, operation, maintenance, and
service of products, for a period of ONE YEAR
FROM THE DATE OF INITIAL USE, BUT IN
NO EVENT SHALL THE WARRANTY EXCEED
24 MONTHS FROM DATE OF DELIVERY TO
DISTRIBUTOR. Proof of Purchase with shipment
date must be furnished by the user to validate the
warranty. This warranty applies only to products
manufactured by Apex Tool Group and specifically
excludes products manufactured by others.
Products not manufactured by Apex Tool Group
are warranted only to the extent and in the manner
warranted to Apex Tool Group by the manufacturer
and then only to the extent Apex Tool Group is
able to enforce such warranty. Apex Tool Group’s
warranty with respect to products manufactured by it
is limited to the repair or replacement, as Apex Tool
Group may elect, of any defective part regarding
which the Distributor has given 5 days written notice
from the discovery of such defect. Installation and
transportation costs are not included. Apex Tool
Group shall have the option of requiring the return to
it of the defective material, transportation prepaid,
for inspection. No allowance will be made for repairs
without Apex Tool Group approval. APEX TOOL
GROUP MAKES NO OTHER WARRANTY
OF ANY KIND WHATSOEVER, EXPRESSED
OR IMPLIED, AND HEREBY DISCLAIMS ALL
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
Lubrication Products
Apex Tool Group products are classified as
non-hazardous manufactured items, defined in the
OSHA 1910.1200 Hazard Communication Standard
as “Articles”. These products, under conditions of
normal use, do not release or cause exposure to a
hazardous chemical.
Under normal conditions of use, lubrication products
sold separately for or used within these tools should
not cause an exposure hazard. Refer to the Material
Safety Data Sheet (M.S.D.S.) for Safety and Disposal
Information. M.S.D.S. sheets are available upon
request from Apex Tool Group.
Apex Tool Group is also aware of, and complies
with, the provisions of section 611 amendments
to the Clean Air Act of 1990. No ozone depleting
chemicals have been used in the manufacture of our
products.
If you resell or distribute these products, you have
the responsibility for ensuring that the Material Safety
Data Sheets are provided to the purchaser.
Proper lubrication is essential to the economical
operation of pneumatic and electric tools. Apex Tool
Group perform better and their life is extended by
using the recommended lubricants. All lubricants
that are listed in the accessory section of this catalog
have undergone extensive testing and are recommended for use with Apex Tool Group products.
Fastener Selection
The suggested fasteners listed in this catalog are
determined by matching a tool’s maximum rated
load to Society of Automotive Engineers (SAE) Grade
5 and International Organization of Standardization
(ISO) Grade 9.8 fasteners. The torque capabilities
for SAE Grade 5 fasteners are from SAE Manual,
SAE J429 (Mechanical and Material Requirement
for Externally Threaded Fasteners). The torque
capabilities for ISO Grade 9.8 fasteners are from
ISO 898-1 (Mechanical Properties of Fasteners). All
values selected are based on lubricated fasteners.
64
The suggested fasteners listed in this catalog are
advisory only, and Apex Tool Group recommends
that you further consult other technical references
before final tool selection. Reliance on the accuracy
of this catalog data for any purpose by anyone is at
the sole risk of that person. Apex Tool Group is not
responsible for any loss, claim, or damage arising
from improper tool selection.
The torque values listed under the headings
“TORQUE” are tested on an ISO 5393 soft joint rate
test fixture unless otherwise stated by a special note.
Pneumatic Assembly Tool Safety
General Safety Instructions
Intended Use
These Safety Instructions must be accessible to the operator at
all times. They must be shown and made available to all people
involved in the use of the tool.
Air assembly tools are intended for tightening of threaded joints
only. Tools must be used for their designated purpose. Do not
use as a hammer, lever or other improper usage that can cause
tool damage and lead to operator injury.
The operator must understand the Safety Instructions
and the Installation, Operation, and Adjustment
Procedures provided in the Technical Manual (included
with the tool). These Safety Instructions are not intended
to be all inclusive. Study and comply with all applicable
Federal, State, and Local Regulations. Contact your
local distributor for assistance.
This symbol identifies the potential for a hazardous
situation. If this warning is not followed, a serious injury
could occur.
Always disconnect the tool from the air hose before
adjusting or repairing.
Immediately shut off the tool in the case of unusual
sound or vibration. Disconnect the tool from the air
hose. Have a qualified person check the tool and repair
before using.
When unpacking the tool, closely check for shipping damages
and accuracy of the shipping documentation.
Do not wear loose clothing, jewelry, or rings. Injury
may result from being caught in tools. Avoid direct
contact with lubricants, grease or adhesives.
Safety glasses or face shield must be worn.
Wear gloves, ear protection and other
protective equipment when required.
Do not modify the tool, any guard or accessory unless approved
in writing by Apex Tool Group.
We recommend the use of a reaction bar
to prevent an uncontrollable reaction of the tool.
This use is dependant on the following factors:
torque, joint, air pressure, form of the tool and
the individual user. Consider the use of reaction
bars to prevent possible injury.
Implement and follow a Safety Maintenance Program to provide
inspection and maintenance of all phases of tool operation and
air supply equipment.
Sockets and bits used with nutrunners and screwdrivers
should be of the power tool or industrial type. Do not
use hand tool sockets on a power tool. Hand tool
sockets can break, resulting in a hazard of flying pieces.
Worn sockets or bits reduce the power delivered to
the fastener, cause drive wear and increase the chance
for breakage. Inspect sockets, bits and drives for wear
or damage and replace as necessary.
Installation & Operation
Only qualified and trained operators should install, adjust or use
air assembly tools.
Connect the tool to an air line with a maximum pressure of
6.2 bar (90 psig). Adjust the air line lubrication to a minimum to
reduce possible contamination of the environment by the exhaust
air. The work area must be well ventilated.
Inspect the air hose and fittings. Do not use damaged,
frayed or deteriorated hoses. A hose rupture can cause
injury.
When using right angle nutrunners, be sure the throttle is
positioned relative to the angle head so the throttle will not
become wedged against an adjacent object in the ON position
due to torque reaction.
The angle head may be repositioned with respect to the lever
to accommodate proper location for the task. If the tool is to be
reversed, locate throttle lever in a neutral position that will prevent
entrapment.
Keep the tool clean and dry to provide the best possible
grip. The tool should be held in such a way to be safe and
comfortable. Firmly grasp the handle of the tool and apply the
socket to the joint before starting the tool.
Adjusting Torque For Shut-Off Tools
Screwdrivers and nutrunners with clutches can stall
rather than shut off if the clutch is adjusted over the
maximum power output of the tool, or if there is a drop
in the air pressure. Low or fluctuating air pressure can
cause tool to fail to shut off! The user must be prepared
to resist the torque until the throttle is released.
Expose clutch through movement of the clutch shield. Using the
hex wrench supplied, turn clockwise for maximum torque or turn
counterclockwise for minimum torque.
NOTE: For best results, start from "MIN" torque and adjust in
"MAX" direction.
Maintenance, Assembly & Disassembly
Inspect air assembly tools every 500 operating hours or every six
months, whichever comes first. Replace worn parts using only
genuine Apex Tool Group replacement parts.
Noise & Vibration
Refer to test data page included with tool.
65
Model Number Index
Model
Page
200427 . . . . . . . . . . . . . . . 13,59
200428 . . . . . . . . . . . . . . . 13,59
200429 . . . . . . . . . . . . . . . 13,59
201012 . . . . . . . . . . . . . . . . . . 36
201034 . . . . . . . . . . . . . . . . . . 36
201039 . . . . . . . . . . . . . . . . . . 36
201203 . . . . . . . . . . . . . . . . . . 12
201510 . . . . . . . . . . . . . . . . . . 36
201601 . . . . . . . . . . . . . . . . . . 62
201606 . . . . . . . . . . . . . . . . . . 62
201607 . . . . . . . . . . . . . . . . . . 62
201608 . . . . . . . . . . . . . . . . . . 62
201675 . . . . . . . . . . . . . . . . . . 62
201690 . . . . . . . . . . . . . . . . . . 62
201770 . . . . . . . . . . . . . . . . . . 13
201898 . . . . . . . . . . . . . . . . . . 36
201900 . . . . . . . . . . . . . . . 36,39
202346 . . . . . . . . . . . . . . . . . . 13
202464 . . . . . . . . . . . . . . . . . . 13
202822 . . . . . . . . . . . . . . . . . . 13
202869 . . . . . . . . . . . . . . . . . . 13
202870 . . . . . . . . . . . . . . . . . . 13
203621 . . . . . . . . . . . . . . . . . . 13
203632 . . . . . . . . . . . . . . . . . . 13
203762 . . . . . . . . . . . . . . . . . . 13
203808 . . . . . . . . . . . . . . . . . . 13
203833 . . . . . . . . . . . . . . . . . . 13
204014 . . . . . . . . . . . . . . . . . . 62
204119 . . . . . . . . . . . . . . . . . . 62
204120 . . . . . . . . . . . . . . . . . . 62
204122 . . . . . . . . . . . . . . . . . . 62
204167 . . . . . . . . . . . . . . . . . . 62
204987 . . . . . . . . . . . . . . . . . . 36
205831 . . . . . . . . . . . . . . . . . . 36
205833 . . . . . . . . . . . . . . . . . . 36
205834 . . . . . . . . . . . . . . . . . . 36
205835 . . . . . . . . . . . . . . . . . . 36
205837 . . . . . . . . . . . . . . . . . . 36
205838 . . . . . . . . . . . . . . . . . . 36
205839 . . . . . . . . . . . . . . . . . . 36
207019 . . . . . . . . . . . . . . . . . . 13
207237 . . . . . . . . . . . . . . . . . . 39
207238 . . . . . . . . . . . . . . . . . . 39
301071 . . . . . . . . . . . . . . . . . . 30
301072 . . . . . . . . . . . . . . . . . . 30
301081 . . . . . . . . . . . . . . . . . . 36
301106 . . . . . . . . . . . . 13,36,39
301108 . . . . . . . . . . . . . . . . . . 36
412603 . . . . . . . . . . . . . . . . . . 13
513156 . . . . . . . . . . . . . . . . . . 63
521041 . . . . . . . . . . . . . . . . . . 62
521042 . . . . . . . . . . . . . . . . . . 62
521060 . . . . . . . . . . . . . . . . . . 62
533485 . . . . . . . . . . . . . . . . . . 63
536333 . . . . . . . . . . . . . . . . . . 63
66
Model
Page
539317 . . . . . . . . . . . . . . . 53,63
540394 . . . . . . . . . . . . . . . . . . 63
540397 . . . . . . . . . . . . . . . . . . 63
542523 . . . . . . . . . . . . . . . . . . 53
542892 . . . . . . . . . . . . . . . . . . 39
550006 . . . . . . . . . . . . . . . . . . 36
809451 . . . . . . . . . . . . . . . . . . 12
809453 . . . . . . . . . . . . . . . . . . 12
809470 . . . . . . . . . . . . . . . . . . 12
809471 . . . . . . . . . . . . . . . . . . 12
809473 . . . . . . . . . . . . . . . . . . 12
809474 . . . . . . . . . . . . . . . . . . 12
847245 . . . . . . . . . . . . . . . . . . 12
847294 . . . . . . . . . . . . . . . . . . 12
847299 . . . . . . . . . . . . . . . . . . 12
847300 . . . . . . . . . . . . . . . . . . 12
847301 . . . . . . . . . . . . . . . . . . 12
847302 . . . . . . . . . . . . . . . . . . 12
847303 . . . . . . . . . . . . . . . . . . 12
847304 . . . . . . . . . . . . . . . . . . 12
847305 . . . . . . . . . . . . . . . . . . 12
847480 . . . . . . . . . . . . . . . . . . 12
847481 . . . . . . . . . . . . . . . . . . 12
847482 . . . . . . . . . . . . . . . . . . 12
847483 . . . . . . . . . . . . . . . . . . 12
847484 . . . . . . . . . . . . . . . . . . 12
847485 . . . . . . . . . . . . . . . . . . 12
847486 . . . . . . . . . . . . . . . . . . 12
847487 . . . . . . . . . . . . . . . . . . 12
847488 . . . . . . . . . . . . . . . . . . 12
849153 . . . . . . . . . . . . . . . . . . 12
849154 . . . . . . . . . . . . . . . . . . 12
849155 . . . . . . . . . . . . . . . . . . 12
849156 . . . . . . . . . . . . . . . . . . 12
849325 . . . . . . . . . . . . . . . . . . 12
849617 . . . . . . . . . . . . . . . . . . 12
849618 . . . . . . . . . . . . . . . . . . 12
849619 . . . . . . . . . . . . . . . . . . 12
849620 . . . . . . . . . . . . . . . . . . 12
849621 . . . . . . . . . . . . . . . . . . 12
849843 . . . . . . . . . . . . . . . . . . 12
849879 . . . . . . . . . . . . . . . . . . 12
849891 . . . . . . . . . . . . . . . . . . 12
849892 . . . . . . . . . . . . . . . . . . 12
849893 . . . . . . . . . . . . . . . . . . 12
849894 . . . . . . . . . . . . . . . . . . 12
849895 . . . . . . . . . . . . . . . . . . 12
849896 . . . . . . . . . . . . . . . . . . 12
849897 . . . . . . . . . . . . . . . . . . 12
849898 . . . . . . . . . . . . . . . . . . 12
861006 . . . . . . . . . . . . . . . . . . 13
863242 . . . . . . . . . . . . . . . . . . 12
865777 . . . . . . . . . . . . . . . . . . 13
867711 . . . . . . . . . . . . . . . . . . 36
867931 . . . . . . . . . . . . . . . . . . 13
Model
Page
867938 . . . . . . . . . . . . . . . . . . 13
869168 . . . . . . . . . . . . . . . . . . 13
869203 . . . . . . . . . . . . . . . . . . 13
869204 . . . . . . . . . . . . . . . . . . 13
869305 . . . . . . . . . . . . . . . . . . 13
869306 . . . . . . . . . . . . . . . . . . 13
869734 . . . . . . . . . . . . . . . . . . 13
869770 . . . . . . . . . . . . . . . . . . 36
928473 . . . . . . . . . . . . . . . . . . 53
928474 . . . . . . . . . . . . . . . . . . 53
928475 . . . . . . . . . . . . . . . . . . 53
928477 . . . . . . . . . . . . . . . . . . 53
928483 . . . . . . . . . . . . . . . . . . 53
928485 . . . . . . . . . . . . . . . . . . 53
928486 . . . . . . . . . . . . . . . . . . 53
930119 . . . . . . . . . . . . . . . . . . 53
931041 . . . . . . . . . . . . . . . . . . 53
931663 . . . . . . . . . . . . . . . . . . 53
931962 . . . . . . . . . . . . . . . . . . 13
932072 . . . . . . . . . . . . . . . . . . 53
934918 . . . . . . . . . . . . . . . 39,53
935472 . . . . . . . . . . . . . . . . . . 53
935965 . . . . . . . . . . . . . . . . . . 53
935966 . . . . . . . . . . . . . . . . . . 53
939348 . . . . . . . . . . . . . . . . . . 39
46037036 . . . . . . . . . . . . . . . . 36
46037081 . . . . . . . . . . . . . . . . 36
46177030 . . . . . . . . . . . . . . . . 36
46437006 . . . . . . . . . . . . . . . . 36
46607016 . . . . . . . . . . . . . . . . 36
46607058 . . . . . . . . . . . . . . . . 36
48047128 . . . . . . . . . . . . . . . . 36
54397004 . . . . . . . . . . . . . . . . 36
110PHH55Q . . . . . . . . . . . . . . 52
110PTHH30Q . . . . . . . . . . . . . 51
11PHH652 . . . . . . . . . . . . . . . . 52
11PHH653 . . . . . . . . . . . . . . . . 52
11PHH65Q . . . . . . . . . . . . . . . 52
11PTHH352 . . . . . . . . . . . . . . . 51
11PTHH353 . . . . . . . . . . . . . . . 51
11PTHH35Q . . . . . . . . . . . . . . 51
120PHH554 . . . . . . . . . . . . . . . 52
120PTHH304 . . . . . . . . . . . . . 51
140PH45Q . . . . . . . . . . . . . . . 52
140PTHC25Q . . . . . . . . . . . . . 51
15STHC40Q . . . . . . . . . . . . . . 51
15STHFC40Q . . . . . . . . . . . . . 51
160PH456 . . . . . . . . . . . . . . . . 52
160PTHC256 . . . . . . . . . . . . . 51
19BPA02Q . . . . . . . . . . . . . . . . . 7
19BPA03Q . . . . . . . . . . . . . . . . . 7
19BPA04Q . . . . . . . . . . . . . . . . . 7
19BPA05Q . . . . . . . . . . . . . . . . . 7
19BPA06Q . . . . . . . . . . . . . . . . . 7
19PCA02Q . . . . . . . . . . . . . . . . 9
Model
Page
19PCA03Q . . . . . . . . . . . . . . . . 9
19PCA04Q . . . . . . . . . . . . . . . . 9
19PCA05Q . . . . . . . . . . . . . . . . 9
19PCA06Q . . . . . . . . . . . . . . . . 9
19PCA07Q . . . . . . . . . . . . . . . . 9
19PCA09Q . . . . . . . . . . . . . . . . 9
19PTA02Q . . . . . . . . . . . . . . . . . 9
19PTA03Q . . . . . . . . . . . . . . . . . 9
19PTA04Q . . . . . . . . . . . . . . . . . 9
19PTA05Q . . . . . . . . . . . . . . . . . 9
19PTA06Q . . . . . . . . . . . . . . . . . 9
19PTA07Q . . . . . . . . . . . . . . . . . 9
19PTA09Q . . . . . . . . . . . . . . . . . 9
19PTA15Q . . . . . . . . . . . . . . . . . 9
19PTS02Q . . . . . . . . . . . . . . . . 11
19PTS03Q . . . . . . . . . . . . . . . . 11
19PTS04Q . . . . . . . . . . . . . . . . 11
19PTS05Q . . . . . . . . . . . . . . . . 11
19RAA02AH2 . . . . . . . . . . . . . 19
19RAA02AH3 . . . . . . . . . . . . . 19
19RAA02AM2 . . . . . . . . . . . . . 19
19RAA03AH2 . . . . . . . . . . . . . 19
19RAA03AH3 . . . . . . . . . . . . . 19
19RAA03AM2 . . . . . . . . . . . . . 19
19RAA04AM2 . . . . . . . . . . . . . 19
19RAA05AM2 . . . . . . . . . . . . . 19
19RAA06AH2 . . . . . . . . . . . . . 19
19RAA06AH3 . . . . . . . . . . . . . 19
19RAA07AH2 . . . . . . . . . . . . . 19
19RAA07AH3 . . . . . . . . . . . . . 19
19RAA09AH2 . . . . . . . . . . . . . 19
19RAA09AH3 . . . . . . . . . . . . . 19
19RAA11AH2 . . . . . . . . . . . . . 19
19RAA11AH3 . . . . . . . . . . . . . 19
19RAA12AH2 . . . . . . . . . . . . . 19
19RAA12AH3 . . . . . . . . . . . . . 19
19RAS03AM2 . . . . . . . . . . . . . 23
19RAS04AH2 . . . . . . . . . . . . . 23
19RAS05AM2 . . . . . . . . . . . . . 23
19RAS06AH3 . . . . . . . . . . . . . 23
19SCA02B . . . . . . . . . . . . . . . . 7
19SCA02Q . . . . . . . . . . . . . . . . 7
19SCA03B . . . . . . . . . . . . . . . . 7
19SCA03Q . . . . . . . . . . . . . . . . 7
19SCA04B . . . . . . . . . . . . . . . . 7
19SCA04Q . . . . . . . . . . . . . . . . 7
19SCA05B . . . . . . . . . . . . . . . . 7
19SCA05Q . . . . . . . . . . . . . . . . 7
19SCA06B . . . . . . . . . . . . . . . . 7
19SCA06Q . . . . . . . . . . . . . . . . 7
19SPA02B . . . . . . . . . . . . . . . . . 7
19SPA02Q . . . . . . . . . . . . . . . . . 7
19SPA03B . . . . . . . . . . . . . . . . . 7
19SPA03Q . . . . . . . . . . . . . . . . . 7
19SPA04B . . . . . . . . . . . . . . . . . 7
Model
Page
19SPA04Q . . . . . . . . . . . . . . . . . 7
19SPA05B . . . . . . . . . . . . . . . . . 7
19SPA05Q . . . . . . . . . . . . . . . . . 7
19SPA06B . . . . . . . . . . . . . . . . . 7
19SPA06Q . . . . . . . . . . . . . . . . . 7
19TCA02Q . . . . . . . . . . . . . . . . 9
19TCA03Q . . . . . . . . . . . . . . . . 9
19TCA04Q . . . . . . . . . . . . . . . . 9
19TCA05Q . . . . . . . . . . . . . . . . 9
19TCA06Q . . . . . . . . . . . . . . . . 9
19TCA07Q . . . . . . . . . . . . . . . . 9
19TCA09Q . . . . . . . . . . . . . . . . 9
19TTA02Q . . . . . . . . . . . . . . . . . 9
19TTA03Q . . . . . . . . . . . . . . . . . 9
19TTA04Q . . . . . . . . . . . . . . . . . 9
19TTA05Q . . . . . . . . . . . . . . . . . 9
19TTA06Q . . . . . . . . . . . . . . . . . 9
19TTA07Q . . . . . . . . . . . . . . . . . 9
19TTA09Q . . . . . . . . . . . . . . . . . 9
19TTA15Q . . . . . . . . . . . . . . . . . 9
19TTS02Q . . . . . . . . . . . . . . . . 11
19TTS03Q . . . . . . . . . . . . . . . . 11
19TTS04Q . . . . . . . . . . . . . . . . 11
19TTS05Q . . . . . . . . . . . . . . . . 11
207596PT . . . . . . . . . . . . . . . . 13
207652PT . . . . . . . . . . . . . . . . 13
207696PT . . . . . . . . . . . . . . . . 13
20PHH753 . . . . . . . . . . . . . . . . 52
20PHH75Q . . . . . . . . . . . . . . . 52
20PTHH403 . . . . . . . . . . . . . . . 51
20PTHH40Q . . . . . . . . . . . . . . 51
24NRS15A12 . . . . . . . . . . . . . 43
24NRS15A13 . . . . . . . . . . . . . 43
24NRS20H15 . . . . . . . . . . . . . 43
24NRS21H16 . . . . . . . . . . . . . 43
24NRS23A13 . . . . . . . . . . . . . 43
24NRS23H15 . . . . . . . . . . . . . 43
24NRS23H20 . . . . . . . . . . . . . 43
24NRS24A12 . . . . . . . . . . . . . 43
24NRS24H16 . . . . . . . . . . . . . 43
24NRS24H18 . . . . . . . . . . . . . 43
24NRS29H18 . . . . . . . . . . . . . 43
24NRS29H25 . . . . . . . . . . . . . 43
24NRS30H20 . . . . . . . . . . . . . 43
24RAA06AL3 . . . . . . . . . . . . . . 19
24RAA07AL3 . . . . . . . . . . . . . . 19
24RAA11AL3 . . . . . . . . . . . . . . 19
24RAA12AM3 . . . . . . . . . . . . . 19
24RAA19AM3 . . . . . . . . . . . . . 19
24RAA23AM3 . . . . . . . . . . . . . 19
24RAS13AM3 . . . . . . . . . . . . . 23
24RTA12 . . . . . . . . . . . . . . . . . 34
24RTA20T2 . . . . . . . . . . . . . . . 34
24RTA30T3 . . . . . . . . . . . . . . . 34
24RTA40T4 . . . . . . . . . . . . . . . 34
Model
Page
250PHF406 . . . . . . . . . . . . . . . 52
250PTHFC226 . . . . . . . . . . . . 51
2RSA-10B . . . . . . . . . . . . . . . . . 7
2RSA-10SB . . . . . . . . . . . . . . . . 7
301937PT . . . . . . . . . . . . . 36,39
302021PT . . . . . . . . . . . . . 13,39
34NRS29H15 . . . . . . . . . . . . . 43
34NRS31H16 . . . . . . . . . . . . . 43
34NRS35H20 . . . . . . . . . . . . . 43
34NRS36H15 . . . . . . . . . . . . . 43
34NRS36H18 . . . . . . . . . . . . . 43
34NRS38H16 . . . . . . . . . . . . . 43
34NRS42H25 . . . . . . . . . . . . . 43
34NRS46H18 . . . . . . . . . . . . . 43
34NRS46H20 . . . . . . . . . . . . . 43
34NRS48H29 . . . . . . . . . . . . . 43
34NRS52H25 . . . . . . . . . . . . . 43
34NRS53H37 . . . . . . . . . . . . . 43
34NRS63H29 . . . . . . . . . . . . . 43
34NRS68H37 . . . . . . . . . . . . . 43
34RAA08AL3 . . . . . . . . . . . . . . 19
34RAA09F1 . . . . . . . . . . . . . . . 28
34RAA11AL3 . . . . . . . . . . . . . . 19
34RAA15AM3 . . . . . . . . . . . . . 19
34RAA16F1 . . . . . . . . . . . . . . . 28
34RAA26AH3 . . . . . . . . . . . . . 19
34RAA28AH3 . . . . . . . . . . . . . 19
34RAA28F1 . . . . . . . . . . . . . . . 28
34RAA33AX3 . . . . . . . . . . . . . 19
34RAA33F2 . . . . . . . . . . . . . . . 28
34RAA37AX3 . . . . . . . . . . . . . 19
34RAA47AX3 . . . . . . . . . . . . . 19
34RAA47F2 . . . . . . . . . . . . . . . 28
34RAA53F2 . . . . . . . . . . . . . . . 28
34RAA53H3 . . . . . . . . . . . . . . 32
34RAA67F3 . . . . . . . . . . . . . . . 28
34RAA67H3 . . . . . . . . . . . . . . 32
34RAA68AZ3 . . . . . . . . . . . . . 19
34RAA68AZ4 . . . . . . . . . . . . . 19
34RAA75AZ3 . . . . . . . . . . . . . 19
34RAA75AZ4 . . . . . . . . . . . . . 19
34RAA94F3 . . . . . . . . . . . . . . . 28
34RAA94H3 . . . . . . . . . . . . . . 32
34RAS103F3 . . . . . . . . . . . . . . 28
34RAS103H3 . . . . . . . . . . . . . 32
34RAS10F1 . . . . . . . . . . . . . . . 28
34RAS11AL3 . . . . . . . . . . . . . . 23
34RAS18F1 . . . . . . . . . . . . . . . 28
34RAS28AH3 . . . . . . . . . . . . . 23
34RAS30F1 . . . . . . . . . . . . . . . 28
34RAS36AX3 . . . . . . . . . . . . . 23
34RAS40F2 . . . . . . . . . . . . . . . 28
34RAS52F2 . . . . . . . . . . . . . . . 28
34RAS58F3 . . . . . . . . . . . . . . . 28
34RAS58H3 . . . . . . . . . . . . . . 32
Model
Page
34RAS73F3 . . . . . . . . . . . . . . . 28
34RAS73H3 . . . . . . . . . . . . . . 32
34RCA30D1 . . . . . . . . . . . . . . 30
34RCA30D3 . . . . . . . . . . . . . . 30
34RCS29D1 . . . . . . . . . . . . . . 30
34RCS29D3 . . . . . . . . . . . . . . 30
35PHH653 . . . . . . . . . . . . . . . . 52
35PHH65Q . . . . . . . . . . . . . . . 52
35PTHH403 . . . . . . . . . . . . . . . 51
35PTHH40Q . . . . . . . . . . . . . . 51
35RSA-10-3 . . . . . . . . . . . . . . . 7
35RSA-10Q . . . . . . . . . . . . . . . . 7
35RSA-20Q . . . . . . . . . . . . . . . . 7
35RSA-5-3 . . . . . . . . . . . . . . . . 7
35RSA-5Q . . . . . . . . . . . . . . . . . 7
35RSA-7Q . . . . . . . . . . . . . . . . . 7
35RSAP-10Q . . . . . . . . . . . . . 10
35RSAP-7Q . . . . . . . . . . . . . . . 10
35RSAPT-5Q . . . . . . . . . . . . . . 10
35RSAPT-7Q . . . . . . . . . . . . . . 10
35RSATP-10-3 . . . . . . . . . . . . 10
35RSATP-10Q . . . . . . . . . . . . . 10
35RSATP-20Q . . . . . . . . . . . . . 10
35RSATP-5-3 . . . . . . . . . . . . . 10
35RSATP-5Q . . . . . . . . . . . . . . 10
35RSATP-7Q . . . . . . . . . . . . . . 10
35STHFA404 . . . . . . . . . . . . . . 51
35STHFA40Q . . . . . . . . . . . . . 51
35STHFC404 . . . . . . . . . . . . . 51
35STHFC40Q . . . . . . . . . . . . . 51
400PHF356 . . . . . . . . . . . . . . . 52
400PTHFC206 . . . . . . . . . . . . 51
41NDR130H15 . . . . . . . . . . . . 44
41NDR130H16 . . . . . . . . . . . . 44
41NDR130H18 . . . . . . . . . . . . 44
41NDR130H20 . . . . . . . . . . . . 44
41NDR130H25 . . . . . . . . . . . . 44
41NDR172H15 . . . . . . . . . . . . 44
41NDR172H16 . . . . . . . . . . . . 44
41NDR172H20 . . . . . . . . . . . . 44
41NDR172H25 . . . . . . . . . . . . 44
41NDR236H15 . . . . . . . . . . . . 44
41NDR236H16 . . . . . . . . . . . . 44
41NDR236H18 . . . . . . . . . . . . 44
45-0710 . . . . . . . . . . . . . . . . . . 63
45-0711 . . . . . . . . . . . . . . . . . . 63
45-0712 . . . . . . . . . . . . . . . . . . 63
45-0713 . . . . . . . . . . . . . . . . . . 63
45-0717 . . . . . . . . . . . . . . . . . . 63
45-0720 . . . . . . . . . . . . . . . . . . 63
45-0722 . . . . . . . . . . . . . . . . . . 63
45-0724 . . . . . . . . . . . . . . . . . . 63
45-0725 . . . . . . . . . . . . . . . . . . 63
45-0726 . . . . . . . . . . . . . . . . . . 63
45-0727 . . . . . . . . . . . . . . . . . . 63
Model
Page
45-0732 . . . . . . . . . . . . . . . . . . 63
45-0734 . . . . . . . . . . . . . . . . . . 63
45-0736 . . . . . . . . . . . . . . . . . . 63
45-0742 . . . . . . . . . . . . . . . . . . 63
45-0744 . . . . . . . . . . . . . . . . . . 63
45-0745 . . . . . . . . . . . . . . . . . . 63
45-0746 . . . . . . . . . . . . . . . . . . 63
45-0747 . . . . . . . . . . . . . . . . . . 63
45-0748 . . . . . . . . . . . . . . . . . . 63
45-0753 . . . . . . . . . . . . . . . . . . 63
45-0918 . . . . . . . . . . . . . . . . . . 63
45-0919 . . . . . . . . . . . . . . . . . . 63
45-0980 . . . . . . . . . . . . . . . . . . 63
45-0983 . . . . . . . . . . . . . . . . . . 63
45-1307 . . . . . . . . . . . . . . . . . . 63
45-1408 . . . . . . . . . . . . . . . . . . 63
45-1409 . . . . . . . . . . . . . . . . . . 63
45-1508 . . . . . . . . . . . . . . . . . . 63
45-1610 . . . . . . . . . . . . . . . . . . 63
45-1810 . . . . . . . . . . . . . . . . . . 63
45-1812 . . . . . . . . . . . . . . . . . . 63
45-1825 . . . . . . . . . . . . . . . . . . 63
45-1982 . . . . . . . . . . . . . . . . . . 63
45NAB-3P-4 . . . . . . . . . . . . . . 21
45RNAB-2-4 . . . . . . . . . . . . . . 27
45RNAB-2P-4 . . . . . . . . . . . . . 21
45RNAB-2T-4 . . . . . . . . . . . . . 21
45RNAB-3-3 . . . . . . . . . . . . . . 27
45RNAB-3P-4 . . . . . . . . . . . . . 21
45RNAB-3T-4 . . . . . . . . . . . . . 21
45RNAB-4-3 . . . . . . . . . . . . . . 27
45RNAB-4T-4 . . . . . . . . . . . . . 21
45RNAB-6-3 . . . . . . . . . . . . . . 27
45RNB-2T-4 . . . . . . . . . . . . . . 23
45RNB-3P-4 . . . . . . . . . . . . . . 23
45RNB-3T-4 . . . . . . . . . . . . . . 23
45RNB-4T-4 . . . . . . . . . . . . . . 23
541715-5 . . . . . . . . . . . . . . . . . 36
55NAL-2T-4 . . . . . . . . . . . . . . . 21
55NAL-3P-4 . . . . . . . . . . . . . . 21
55NAL-3T-4 . . . . . . . . . . . . . . . 21
55NAL-4P-4 . . . . . . . . . . . . . . 21
55NAL-4T-4 . . . . . . . . . . . . . . . 21
55NL-2T-4 . . . . . . . . . . . . . . . . 23
55NL-3T-4 . . . . . . . . . . . . . . . . 23
55PHH603 . . . . . . . . . . . . . . . . 52
55PTHH403 . . . . . . . . . . . . . . . 51
55RNAL-2-4 . . . . . . . . . . . . . . 27
55RNAL-2T-4 . . . . . . . . . . . . . 21
55RNAL-3-4 . . . . . . . . . . . . . . 27
55RNAL-3P-4 . . . . . . . . . . . . . 21
55RNAL-3T-4 . . . . . . . . . . . . . 21
55RNAL-4-4 . . . . . . . . . . . . . . 27
55RNAL-4P-4 . . . . . . . . . . . . . 21
55RNAL-4T-4 . . . . . . . . . . . . . 21
67
Model
Page
55RNAL-6T-4 . . . . . . . . . . . . . 21
55RNL-2T-4 . . . . . . . . . . . . . . . 23
55RNL-3T-4 . . . . . . . . . . . . . . . 23
55RNL-7T-4 . . . . . . . . . . . . . . . 23
60NDR092HD24 . . . . . . . . . . . 44
60NDR092HD40 . . . . . . . . . . . 44
60NDR092HD48 . . . . . . . . . . . 44
60NDR092HD56 . . . . . . . . . . . 44
64TTK110D4 . . . . . . . . . . . . . . 27
64TTK125D4 . . . . . . . . . . . . . . 27
64TTK1260D8 . . . . . . . . . . . . . 27
64TTK140D4 . . . . . . . . . . . . . . 27
64TTK1475D8 . . . . . . . . . . . . . 27
64TTK150D6 . . . . . . . . . . . . . . 27
64TTK175D6 . . . . . . . . . . . . . . 27
64TTK1820D8 . . . . . . . . . . . . . 27
64TTK1985D8 . . . . . . . . . . . . . 27
64TTK205D6 . . . . . . . . . . . . . . 27
64TTK255D6 . . . . . . . . . . . . . . 27
64TTK345D6 . . . . . . . . . . . . . . 27
64TTK34D4 . . . . . . . . . . . . . . . 27
64TTK3850D12 . . . . . . . . . . . . 27
64TTK425D6 . . . . . . . . . . . . . . 27
64TTK44D4 . . . . . . . . . . . . . . . 27
64TTK55D4 . . . . . . . . . . . . . . . 27
64TTK570D6 . . . . . . . . . . . . . . 27
64TTK640D8 . . . . . . . . . . . . . . 27
64TTK750D8 . . . . . . . . . . . . . . 27
64TTK75D4 . . . . . . . . . . . . . . . 27
64TTK90D4 . . . . . . . . . . . . . . . 27
64TTK930D8 . . . . . . . . . . . . . . 27
64TTS110D4 . . . . . . . . . . . . . . 27
64TTS125D4 . . . . . . . . . . . . . . 27
64TTS1260D8 . . . . . . . . . . . . . 27
64TTS140D4 . . . . . . . . . . . . . . 27
64TTS1475D8 . . . . . . . . . . . . . 27
64TTS150D6 . . . . . . . . . . . . . . 27
64TTS175D6 . . . . . . . . . . . . . . 27
64TTS1820D8 . . . . . . . . . . . . . 27
64TTS1985D8 . . . . . . . . . . . . . 27
64TTS205D6 . . . . . . . . . . . . . . 27
64TTS255D6 . . . . . . . . . . . . . . 27
64TTS345D6 . . . . . . . . . . . . . . 27
64TTS34D4 . . . . . . . . . . . . . . . 27
64TTS3850D12 . . . . . . . . . . . . 27
64TTS425D6 . . . . . . . . . . . . . . 27
64TTS44D4 . . . . . . . . . . . . . . . 27
64TTS55D4 . . . . . . . . . . . . . . . 27
64TTS570D6 . . . . . . . . . . . . . . 27
64TTS640D8 . . . . . . . . . . . . . . 27
64TTS750D8 . . . . . . . . . . . . . . 27
64TTS75D4 . . . . . . . . . . . . . . . 27
64TTS90D4 . . . . . . . . . . . . . . . 27
64TTS930D8 . . . . . . . . . . . . . . 27
75 NAL-2X-6 . . . . . . . . . . . . . . 21
68
Model
Page
75NAL-2V-4 . . . . . . . . . . . . . . 21
75NL-2V-4 . . . . . . . . . . . . . . . . 23
75NL-2X-6 . . . . . . . . . . . . . . . . 23
75NL-3V-4 . . . . . . . . . . . . . . . . 23
75RNAL-2V-4 . . . . . . . . . . . . . 21
75RNAL-2X-6 . . . . . . . . . . . . . 21
75RNAL-3V-4 . . . . . . . . . . . . . 21
75RNAL-3X-6 . . . . . . . . . . . . . 21
75RNL-2X-6 . . . . . . . . . . . . . . 23
75RNL-3V-4 . . . . . . . . . . . . . . 23
75RNL-3X-6 . . . . . . . . . . . . . . 23
7PHH602 . . . . . . . . . . . . . . . . . 52
7PHH60Q . . . . . . . . . . . . . . . . 52
7PTHH352 . . . . . . . . . . . . . . . . 51
7PTHH35Q . . . . . . . . . . . . . . . 51
7STHFA55Q . . . . . . . . . . . . . . 51
7STHFC55Q . . . . . . . . . . . . . . 51
80PHH604 . . . . . . . . . . . . . . . . 52
80PHH60Q . . . . . . . . . . . . . . . 52
80PTHH354 . . . . . . . . . . . . . . . 51
80PTHH35Q . . . . . . . . . . . . . . 51
88RSA-5C-3 . . . . . . . . . . . . . . . 7
88RSA-5CQ . . . . . . . . . . . . . . . 7
88RSA-7C-3 . . . . . . . . . . . . . . . 7
88RSA-7CQ . . . . . . . . . . . . . . . 7
88RSAL-5C-3 . . . . . . . . . . . . . . 7
88RSAL-5CQ . . . . . . . . . . . . . . 7
88RSAPT-2CQ . . . . . . . . . . . . 10
88RSAPT-5C-3 . . . . . . . . . . . . 10
88RSAPT-5CQ . . . . . . . . . . . . 10
88RSAPT-7CQ . . . . . . . . . . . . 10
88RSATP-2C-3 . . . . . . . . . . . . 10
88RSATP-2CQ . . . . . . . . . . . . 10
88RSATP-5C-3 . . . . . . . . . . . . 10
88RSATP-5CQ . . . . . . . . . . . . 10
88RSATP-7C-3 . . . . . . . . . . . . 10
88RSATP-7CQ . . . . . . . . . . . . 10
88SA-5C-3 . . . . . . . . . . . . . . . . 7
88SA-5CQ . . . . . . . . . . . . . . . . . 7
88SA-7CQ . . . . . . . . . . . . . . . . . 7
8RNP-10BQ . . . . . . . . . . . . . . 11
8RNP-20BQ . . . . . . . . . . . . . . 11
8RSA-10 . . . . . . . . . . . . . . . . . . 7
8RSA-10BQ . . . . . . . . . . . . . . . 7
8RSA-5BQ . . . . . . . . . . . . . . . . 7
8RSA-7BQ . . . . . . . . . . . . . . . . 7
8RSAL-10BQ . . . . . . . . . . . . . . 7
936695PT . . . . . . . . . . . . . . . . 53
937442PT . . . . . . . . . . . . . . . . 53
937442PT . . . . . . . . . . . . . . . . 53
937443PT . . . . . . . . . . . . . . . . 53
937443PT . . . . . . . . . . . . . . . . 53
937444PT . . . . . . . . . . . . . . . . 53
937444PT . . . . . . . . . . . . . . . . 53
937445PT . . . . . . . . . . . . . . . . 53
Model
Page
937445PT . . . . . . . . . . . . . . . . 53
937446PT . . . . . . . . . . . . . . . . 53
937446PT . . . . . . . . . . . . . . . . 53
937447PT . . . . . . . . . . . . . . . . 53
937447PT . . . . . . . . . . . . . . . . 53
937448PT . . . . . . . . . . . . . . . . 53
937448PT . . . . . . . . . . . . . . . . 53
937449PT . . . . . . . . . . . . . . . . 53
937449PT . . . . . . . . . . . . . . . . 53
937450PT . . . . . . . . . . . . . . . . 53
937450PT . . . . . . . . . . . . . . . . 53
937451PT . . . . . . . . . . . . . . . . 53
937451PT . . . . . . . . . . . . . . . . 53
A139856 . . . . . . . . . . . . . . . . . 63
BL-2A . . . . . . . . . . . . . . . . 13,59
BL-4A . . . . . . . . . . . . . . . . 13,59
BL-6A . . . . . . . . . . . . . . . . . . . 59
BL-8A . . . . . . . . . . . . . . . . . . . 59
BLL-6A . . . . . . . . . . . . . . . . . . 59
BLL-8A . . . . . . . . . . . . . . . . . . 59
BM-13A . . . . . . . . . . . . . . . . . . 59
BM-18A . . . . . . . . . . . . . . . . . . 59
BM-25A . . . . . . . . . . . . . . . . . . 59
BM-35A . . . . . . . . . . . . . . . . . . 59
BM-45A . . . . . . . . . . . . . . . . . . 59
BML-13A . . . . . . . . . . . . . . . . . 59
CPBA-12-AH . . . . . . . . . . . . . . 61
CPBA-18 . . . . . . . . . . . . . . . . . 61
CPBA-18-AH . . . . . . . . . . . . . . 61
CPBA-30 . . . . . . . . . . . . . . . . . 61
CPBA-30-AH . . . . . . . . . . . . . . 61
CPBA-30-WM . . . . . . . . . . . . . 61
CSBA-12-AH . . . . . . . . . . . . . . 61
CSBA-18-AH . . . . . . . . . . . . . . 61
CSBA-24 . . . . . . . . . . . . . . . . . 61
CSBA-30 . . . . . . . . . . . . . . . . . 61
CSBA-30-AH . . . . . . . . . . . . . . 61
CSBA18 . . . . . . . . . . . . . . . . . 61
H16NDR09H15 . . . . . . . . . . . . 44
H16NDR09H20 . . . . . . . . . . . . 44
H30NDR08H15 . . . . . . . . . . . . 44
H30NDR08H16 . . . . . . . . . . . . 44
H30NDR08H18 . . . . . . . . . . . . 44
H30NDR08H20 . . . . . . . . . . . . 44
H30NDR08H25 . . . . . . . . . . . . 44
PBA-12 . . . . . . . . . . . . . . . . . . 61
PBA-12-AH . . . . . . . . . . . . . . . 61
PBA-12-WM . . . . . . . . . . . . . . 61
PBA-18 . . . . . . . . . . . . . . . . . . 61
PBA-18-18-AH . . . . . . . . . . . . 61
PBA-18-AH . . . . . . . . . . . . . . . 61
PBA-24 . . . . . . . . . . . . . . . . . . 61
PBA-24-AH . . . . . . . . . . . . . . . 61
PBA-30-AH . . . . . . . . . . . . . . . 61
PL-12A . . . . . . . . . . . . . . . 13,59
Model
Page
SBA-12 . . . . . . . . . . . . . . . . . . 61
SBA-12-AH . . . . . . . . . . . . . . . 61
SBA-18 . . . . . . . . . . . . . . . . . . 61
SBA-18-AH . . . . . . . . . . . . . . . 61
SBA-24-AH . . . . . . . . . . . . . . . 61
SBA-30-AH . . . . . . . . . . . . . . . 61
SBA-30-WM . . . . . . . . . . . . . . 61
SW-102 . . . . . . . . . . . . . . . . . . 63
SW-103 . . . . . . . . . . . . . . . . . . 63
SW-104 . . . . . . . . . . . . . . . . . . 63
SWR-102 . . . . . . . . . . . . . . . . . 63
TVP-110-15-D . . . . . . . . . . . . . 38
TVP-110-15-P . . . . . . . . . . . . . 38
TVP-110-15-S . . . . . . . . . . . . . 38
TVP-110-15-U . . . . . . . . . . . . . 38
TVP-110-30-D . . . . . . . . . . . . . 38
TVP-110-30-P . . . . . . . . . . . . . 38
TVP-110-30-S . . . . . . . . . . . . . 38
TVP-110-30-U . . . . . . . . . . . . . 38
W-2109-8 . . . . . . . . . . . . . . . . 57
W-2120-12 . . . . . . . . . . . . . . . 57
WL-200-3 . . . . . . . . . . . . . . . . 57
WL-200-4 . . . . . . . . . . . . . . . . 57
WP-2049-6 . . . . . . . . . . . . . . . 57
WP-2050-6 . . . . . . . . . . . . . . . 57
WP-2059-6 . . . . . . . . . . . . . . . 57
WP-2059-8 . . . . . . . . . . . . . . . 57
WP-2059-8-6E . . . . . . . . . . . . 57
WP-2060B-6 . . . . . . . . . . . . . . 57
WP-2060B-8 . . . . . . . . . . . . . . 57
WP-2109B-8 . . . . . . . . . . . . . . 57
WP-2110B-8 . . . . . . . . . . . . . . 57
WP-255-3P . . . . . . . . . . . . . . . 57
WP-455-4P . . . . . . . . . . . . . . . 57
WP-455-4R . . . . . . . . . . . . . . . 57
WPS-2109B . . . . . . . . . . . . . . 57
WS-2119 . . . . . . . . . . . . . . . . . 57
WT-2109-8 . . . . . . . . . . . . . . . 57
WT-2110-8 . . . . . . . . . . . . . . . 57
WT-2119-12 . . . . . . . . . . . . . . 57
WT-2120-12 . . . . . . . . . . . . . . 57
WTS-2109 . . . . . . . . . . . . . . . . 57
WTS-2119 . . . . . . . . . . . . . . . . 57
WTS-2120 . . . . . . . . . . . . . . . . 57
Power Tools Sales & Service Centers
Please note that all locations may not service all products. Please contact the nearest Apex Tool Group Sales & Service Center for the
appropriate facility to handle your service requirements.
D E T R O I T,
LOS ANGELES, CALIFORNIA
C H I N A
G E R M A N Y
Apex Tool Group
Sales & Service Center
2630 Superior Court
Auburn Hills, MI 48326
Tel: (248) 393 5640
Fax: (248) 391 6295
M I C H I G A N
Apex Tool Group
Sales & Service Center
6881 Stanton Avenue, Unit B
Buena Park, CA 90621
Tel: (714) 994-1491
Fax: (714) 994-9576
Cooper (China) Co., Ltd.
An Apex Tool Group, LLC company
955 Sheng Li Road,
Heqing Pudong, Shanghai
China 201201
Tel: +86 21 28994176
Fax: +86 21 51118446
Apex Tool Group
GmbH
Industriestraße 1
73463 Westhausen
Germany
Tel: +49 (0) 73 63 81 0
Fax: +49 (0) 73 63 81 222
E-mail: info@apexpowertools.eu
H O U S T O N ,
YO R K ,
E N G L A N D
H U N G A R Y
T E X A S
P E N N S Y LVA N I A
Apex Tool Group
Sales & Service Center
6550 West Sam Houston
Parkway North, Suite 200
Houston, TX 77041
Tel: (713) 849 2364
Fax: (713) 849 2047
Apex Tool Group
Sales & Service Center
York Service Center
3990 E. Market Street
York, PA 17402
Tel:(717) 755 2933
Fax: (717) 757 5063
S E AT T L E ,
B R A Z I L
WA S H I N G T O N
Apex Tool Group
Sales & Service Center
2865 152nd Ave N.E.
Redmond, WA 98052
Tel: (425) 497 0476
Fax: (425) 497 0496
L E X I N G T O N ,
Apex Tool Group
Sales & Service Center
Caixa Postal 692
18001-970 Sorocaba, SP
Brazil
Tel: +55 15 2383929
Fax: +55 15 2383260
S C
Apex Tool Group
670 Industrial Drive
Lexington, SC 29072
Tel: (800) 845 5629
Tel: (803) 951 7544
Fax: (803) 358 7681
Apex Tool Group, LLC
1000 Lufkin Road
Apex, NC 27539
Phone:919-387-0099
Fax:919-387-2614
www.clecotools.com
SP-1000-EN 1112 5M
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
COPYRIGHT © 2012 APEX TOOL GROUP, LLC. PRINTED IN USA.
C A N A D A
Apex Tool Group
Sales & Service Center
5925 McLaughlin Road
Mississauga, Ont. L5R 1B8
Canada
Tel: (905) 501 4785
Fax: (905) 501 4786
Apex Tool Group
GmbH
C/O Spline Gauges
Piccadilly, Tamworth,
Staffordshire B78 2ER
United Kingdom
Tel: +44 1827 8741 28
Fax: +44 1827 8741 28
Apex Tool Group
Hungaria Kft.
Platànfa u. 2
9027 Györ
Hungary
Tel: +36 96 66 1383
Fax: +36 96 66 1135
M E X I C O
F R A N C E
Apex Tool Group S.A.S
25 rue Maurice Chevalier
B. P. 28
77831 Ozoir-la-Ferrière Cedex
France
Tel: +33 1 64 43 22 00
Fax: +33 1 64 43 17 17
Cooper Tools
de México S.A. de C.V.
An Apex Tool Group, LLC company
Vialidad El Pueblito #103 Parque
Industrial Querétaro Querétaro,
QRO 76220
Mexico
Tel: +52 (442) 211 3800
Fax: +52 (442) 103 0443
www.apexpowertools.com
www.apexpowertools.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising