Lumel N43 power network meter USER’S MANUAL

Below you will find brief information for power network meter N43. The N43 meter is a programmable digital instrument designed for measuring 3-phase, 3 or 4-wire power network parameters in balanced or unbalanced systems. The measured values can be displayed on a dedicated LCD display. This meter allows control and optimization of the power electronic devices, systems, and industrial installations. It can be used to measure RMS of voltage and current, active, reactive, and apparent power, active and reactive energy, power factors, frequency, THD and averaged values. The meter also supports P Demand - "power guard", S Demand, I Demand /15, 30 or 60 minutes/.

PDF Download
Document
Lumel N43 Power Network Meter USER’S MANUAL | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Programmable digital instrument
  • Measures 3-phase, 3 or 4-wire power network parameters
  • Dedicated LCD display
  • Control and optimization of power electronic devices
  • Measures RMS of voltage and current
  • Measures active, reactive, and apparent power
  • Measures active and reactive energy
  • Measures power factors, frequency, THD
  • Supports P Demand, S Demand, I Demand
  • RS-485 and USB interfaces

Frequently asked questions

The N43 meter can measure 3-phase, 3 or 4-wire power networks, both balanced and unbalanced.

The N43 meter measures RMS of voltage and current, active, reactive and apparent power, active and reactive energy, power factors, frequency, THD and averaged values.

The N43 meter has RS-485 and USB interfaces.

Yes, the N43 meter can be used to control and optimize power electronic devices, systems, and industrial installations.
Preparing document for printing…
0%