User manual | Datasheet - Dnet Distribution

Datasheet
Zero-Variable Outdoor Wireless Radio
Models: BM2-Ti, BM5-Ti
Fully Integrated Radio
Weatherproof Aluminum Casing
Directly Connects to Any Antenna
with an N-Type Connector
Overview
Weatherproof Gasket in
N-Type Connector
Datasheet
Revolutionary Design
The Bullet™ M Titanium is the latest
version of the popular Ubiquiti Bullet.
Like its predecessor, Bullet M Titanium
is a wireless radio with an integrated
N-Type RF connector that can be
directly plugged in to any antenna1 to
create a powerful and robust outdoor
Access Point, Client, or Bridge.
TOUGHCable™
Connector 2
The Bullet M Titanium features a tough
weatherproof design. Made from
aircraft-grade aluminum, the casing
is designed to withstand nature’s
harshest elements.
Aluminum Casing
Cable Gland Housing
With up to 600 mW of power and
enhanced receiver design, the Bullet M
Titanium is ideal for long-distance links,
capable of up to 100+ Mbps real TCP/IP
speeds over several kilometers.
Compression Nut
The Bullet M Titanium is engineered to survive extreme conditions. Featuring
an upgraded aluminum casing, weatherproof N-Type connection gasket, and
water-tight cable gland, the Bullet M Titanium is virtually bullet-proof.
Zero-Variable Deployment
The Bullet M Titanium eliminates the
need to use RF cables and requires no
special antenna or tools to install. No
radio card / host board issues. No RF
cable quality concerns. No mechanical
stability concerns. No enclosure
mounting requirements. With the
Bullet M Titanium, operators can just
plug and go.
Integrated airMAX™
Technology
The Bullet M Titanium can instantly
become a powerful TDMA BaseStation
utilizing Ubiquiti’s breakthrough
airMAX technology. With airMAX, PtMP
networks can scale gracefully while
maintaining high throughput and low
latency performance.
Any antenna1 can easily be transformed into a powerful and robust Ubiquiti
Access Point, Client, or Bridge by simply plugging in the Bullet M Titanium.
1
2
Bullet M Titanium can be connected to any antenna with an N-Type female connector.
For optimal performance and equipment protection, use Ubiquiti TOUGHCable shielded Ethernet cables.
www.ubnt.com/bulletm
2
Software
9'
9'
9'
9'
9'
9'
9'
9'
Datasheet
airOS is a versatile, highly developed
!"#$%#&#'()*+,)-'&-./0121345'6&'
is exceptionally intuitive and was
designed to require no training to
operate. Behind the user interface is
,'71+-)8%2'()*+,)-',)./#&-.&%)-'&/,&'
enables high-performance, outdoor
multipoint networking.
Protocol Support
Channel Shifting
Spectral Width Adjustment
ACK Auto-Timing
AAP Technology
Multiple VLAN Support
DHCP Relay
Multi-Language Support
Integrated on all Ubiquiti M products,
airView provides advanced spectrum
analyzer functionality: waterfall,
waveform, and real-time spectral
views allow operators to identify noise
signatures and plan their networks to
minimize noise interference.
Waterfall Aggregate energy over time
for each frequency.
Waveform Aggregate energy
collected.
Real-time Energy is shown in real-time
as a function of frequency.
Recording Automate airView to
record and report results.
airControl is a powerful and
intuitive Web-based server network
management application that allows
operators to centrally manage entire
networks of Ubiquiti devices.
9'
9'
9'
9'
9'
9'
Network Map
Monitor Device Status
Mass Firmware Upgrade
Web UI Access
Manage Groups of Devices
Task Scheduling
www.ubnt.com/bulletm
3
!"#$%&$'(%)*+
System Information
Processor Specs
Atheros MIPS 24KC, 400 MHz
Datasheet
Memory Information
32 MB SDRAM, 8 MB Flash
Networking Interface
(1) 10/100 Ethernet Port
Regulatory / Compliance Information
Wireless Approvals
FCC Part 15.247, IC RS210, CE
RoHS Compliance
Yes
Physical / Electrical / Environmental
Dimensions
190 x 46 mm
Weight
196 g
Enclosure Characteristics
Powder Coated Aluminum
Antenna Connector
N-Type Connector (male)
Power Supply
Power Method
24V, 0.5A PoE Adapter (included)
Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Max. Power Consumption
BM2-Ti
7 Watts
BM5-Ti
6 Watts
Operating Temperature
-40 to 80° C
Operating Humidity
5 to 95% Condensing
Shock and Vibration
ETSI300-019-1.4
Software Information
Modes
SNMP, DHCP, NAT
Utilities
Site Survey with Preferred SSID, Antenna Alignment Tool, Discovery Utility
Security
QoS
WEP/WPA/WPA2
802.11e / WMM Support
Statistical Reporting
www.ubnt.com/bulletm
4
Station, Access Point, AP Repeater
Services
Ethernet Activity, Uptime, Packet Success/Errors
!"#$%&$'(%)*+
Bullet M2 Titanium - Operating Frequency 2412 - 2462 MHz
Data Rate
Sensitivity
Tolerance
6-24 Mbps
28 dBm
+/-2 dB
24 Mbps
-83 dBm
+/-2 dB
36 Mbps
25 dBm
+/-2 dB
36 Mbps
-80 dBm
+/-2 dB
48 Mbps
24 dBm
+/-2 dB
48 Mbps
-77 dBm
+/-2 dB
54 Mbps
23 dBm
+/-2 dB
54 Mbps
-75 dBm
+/-2 dB
MCS0
28 dBm
+/-2 dB
MCS0
-96 dBm
+/-2 dB
MCS1
28 dBm
+/-2 dB
MCS1
-95 dBm
+/-2 dB
MCS2
28 dBm
+/-2 dB
MCS2
-92 dBm
+/-2 dB
MCS3
28 dBm
+/-2 dB
MCS3
-90 dBm
+/-2 dB
MCS4
27 dBm
+/-2 dB
MCS4
-86 dBm
+/-2 dB
MCS5
25 dBm
+/-2 dB
MCS5
-83 dBm
+/-2 dB
MCS6
23 dBm
+/-2 dB
MCS6
-77 dBm
+/-2 dB
MCS7
22 dBm
+/-2 dB
MCS7
-74 dBm
+/-2 dB
11b/g
Tolerance
Output Power
Datasheet
?;'<1+-)'=7-.#(.,&#10>
Avg. TX
11n
11n
11b/g
:;'<1+-)'=7-.#(.,&#10>
Data Rate
28 dBm
Range Performance
50+ km (Outdoor - Antenna Dependent)
Bullet M5 Titanium - Operating Frequency 5170 - 5825 MHz*
?;'<1+-)'=7-.#(.,&#10>
Avg. TX
Tolerance
Data Rate
Sensitivity
Tolerance
25 dBm
+/-2 dB
24 Mbps
-83 dBm
+/-2 dB
36 Mbps
23 dBm
+/-2 dB
36 Mbps
-80 dBm
+/-2 dB
48 Mbps
21 dBm
+/-2 dB
48 Mbps
-77 dBm
+/-2 dB
54 Mbps
20 dBm
+/-2 dB
54 Mbps
-75 dBm
+/-2 dB
MCS0
25 dBm
+/-2 dB
MCS0
-96 dBm
+/-2 dB
MCS1
25 dBm
+/-2 dB
MCS1
-95 dBm
+/-2 dB
MCS2
25 dBm
+/-2 dB
MCS2
-92 dBm
+/-2 dB
MCS3
25 dBm
+/-2 dB
MCS3
-90 dBm
+/-2 dB
MCS4
24 dBm
+/-2 dB
MCS4
-86 dBm
+/-2 dB
MCS5
22 dBm
+/-2 dB
MCS5
-83 dBm
+/-2 dB
MCS6
20 dBm
+/-2 dB
MCS6
-77 dBm
+/-2 dB
MCS7
19 dBm
+/-2 dB
MCS7
-74 dBm
+/-2 dB
Output Power
Range Performance
11a
Data Rate
1-24 Mbps
11n / airMAX
11n / airMAX
11a
:;'<1+-)'=7-.#(.,&#10>
25 dBm
50+ km (Outdoor - Antenna Dependent)
* Only 5725 - 5850 MHz supported in the USA
www.ubnt.com/bulletm
5
Datasheet
Protect your networks from the most
brutal environments with Ubiquiti
Networks’ industrial-grade, shielded
Ethernet cable, TOUGHCable.
Increase Performance
Dramatically improve your
Ethernet link states, speeds, and
overall performance with Ubiquiti
TOUGHCables.
Extreme Weatherproof
Designed for outdoor use,
TOUGHCables have been built to
perform even in the harshest weather
and environments.
ESD Damage Protection
Protect your networks from
devastating electrostatic discharge
(ESD) attacks.
TOUGHCable Connectors
Extended Cable Support
TOUGHCables have been developed
to increase power handling
performance for extended cable run
lengths.
F%&'()#'*""9#/&$(5-&/#G,2#0$&#6(+.#H3(I0(+(#JKHLM8*3"&$#*-/#*N*("*3"&#(-#
100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet
.*2/6*2&#/*1*5&<#6.("&#*"",6(-5#2*%(/#)#&"/#/&%",91&-+#6(+.,0+#$,"/&2(-57
Bulletproof your networks
ESD attacks are the leading cause for
device failures. The diagram below
illustrates the areas vulnerable to
ESD attacks in a network.
TOUGHCable is currently available in
two versions: PRO Shielding Protection
and CARRIER Shielding Protection.
By using a grounded Ubiquiti Power
over Ethernet (PoE) Adapter along with
Ubiquiti TOUGHCable and TOUGHCable
Connectors, you can effectively protect
against ESD attacks.
TOUGHCable PRO is a Category 5e,
outdoor, carrier-class shielded cable
with an integrated ESD drain wire.
TOUGHCable CARRIER is a
8*+&5,29:;&<#,0+/,,2<#'*22(&2='"*$$#
shielded cable that features
an integrated ESD drain wire,
anti-crosstalk divider, and secondary
shielding. It is rated to provide optimal
performance on Gigabit Ethernet
networks.
Unshielded
cable with
no ESD drain
Ubiquiti
TOUGHCable
Additional Information:
># 24 AWG copper conductor pairs
># 26 AWG integrated ESD drain wire
to prevent ESD attacks and damage
># PE outdoor-rated, weatherproof
4*'?&+
># Multi-layered shielding
># Available in lengths of 1000 ft
@ABC7D:1E
PoE adapter with
no earth ground
Ubiquiti
PoE Adapter
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the installer’s responsibility to follow local country regulations, including operation within
legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
For further information, please visit www.ubnt.com.
!""#$%&'()#'*+(,-$#(-#+.($#/,'01&-+#*2&#$034&'+#+,#'.*-5&#6(+.,0+#-,+('&7
© 2012 Ubiquiti Networks, Inc. All rights reserved.
6
www.ubnt.com
RRPH062712

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project