ZEISS Axiocam 506 color Your Microscope Camera for Imaging of

ZEISS Axiocam 506 color Your Microscope Camera for Imaging of
Product Information
Version 1.0
ZEISS Axiocam 506 color
Your Microscope Camera for Imaging of Large Sample Areas
­­­­– Fast, in True Color, and High Resolution
Technical Specifications
›
Technology and Details
› Service
ZEISS Axiocam 506 color
Sensor Model
Sony ICX 694, EXview HAD CCD II ™
Progressive Scan
Quad-Port Readout
Selected sensor quality
Sensor Pixel Count
6 Megapixel: 2752 (H) × 2208 (V)
Pixel Size
4.54 μm x 4.54 μm
Sensor Size
Effective sensor size: 12.5 mm x 10.0 mm;
image diagonal 16 mm, equivalent to 1" sensor format
Spectral Sensitivity
Approx. 400 nm - 720 nm, coated BG 40 IR Cut Filter
RGB Bayer color filter mask
Max Full Well Capacity (typical)
15.000 e-
Signal Amplification
Adjustable analog amplification: 1x, 2x, 3x
Readout Speed
39 MHz, 13 Mhz
Readout Noise (typical)
6,5 e- at 39 Mhz
6,0 e- at 13 Mhz
Dynamic Range (typical)
1:2500 (68 dB)
Digitization
14 Bit / Pixel
Dark Current (typical)
<0,06 e-/p/s at 18 °C sensor temperature
Cooling
Regulated Peltier-cooling (power supply via USB 3.0 and USB 2.0)
Sensor temperature 18 °C
Dark Current Compensation
Digital dark current compensation for optimum low light performance at long exposure times
Automatic hot pixel correction
Exposure Time Range
250 µs to 60 s
2
Technical Specifications
›
Technology and Details
Binning Modes and Frame Rates
› Service
Binning
Pixel Count (H x V)
Mode
FPS @ 1 ms
1x1
2752
x 2208
Color/Mono
20
2x2
1376
x 1104
Mono
34
3x3
912
x 736
Color/Mono
44
4x4
688
x 552
Mono
52
5x5
554
x 440
Color/Mono
58
ROI
2752
x 1080
Color/Mono
33
ROI
2752
x 512
Color/Mono
50
(exposure time < readout time)
Color Interpolation Modes
High Speed: optimum speed color interpolation
High Quality: optimum quality color interpolation
Live Frame Rates
Max. Frame Rate
Binning factor / Mode
Resolution / Pixel
Maximum ratings at optimum hardware settings
19 frames/s
1 / slow
2752 x 2208
33 frames/s
2 / medium
917 x 733
51 frames/s
3 / fast
550 x 440
Data-Post Processing (optional)
Objective specific shading correction
Sharpening
Black reference, dark current compensation
Color enhancement
Special Features
Time stamp from camera for precise acquisition time point
Auto Switch Mode for Single Port / Dual Port / Quad Port Readout
Adjustable intensity of status LED
Dual Port / Quad Port Readout
Special Preset Modes
Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition
Overlapping exposure and readout for fast time lapse imaging
3
Technical Specifications
›
Technology and Details
Switchable Sensor Output Amplifier
Single Port Readout for long exposure times for maximum signal quality
Dual Port or Quad Port Readout for improved readout speed at full resolution
› Service
Automatic port activation mode or full manual mode
Region of Interest (ROI)
User defined imaging sub area for improvement of readout speed and reduction of amount of data
Hardware Trigger
Galvanic isolated I/O-signals
Three output signals: exposure time, readout time, trigger ready,
i.e. for controlling external mechanical shutters
One trigger input for exposure control,
5V auxiliary voltage, GND
Status LED
Top LED: camera status (acquisition, power, cooling, speed)
Back LED: trigger status
Interface
USB 3.0 SuperSpeed (5 Gbit/s)
Bandwidth max. 240 Mbytes/s
USB 2.0 optional, with lower speed
Optical Interface
C-Mount
Max. File Size per Image
Approx. 36.4 MB per image with 2752 x 2208 Pixel at 3 x 14 Bit/Pixel
Operating Systems
Microsoft® Windows 7 Enterprise and higher
Size (W x H x D) / Weight
10.8 cm x 4.3 cm x 7.8 cm / 500 g
Housing
Blue anodized aluminum
¼" thread for camera equipment
Zero vibration by convection-cooling, optimized cooling finns
Teflon coated C-Mount thread
Coated IR filter
Certificates
CE
Power Supply
7 W power consumption, power supply camera: USB 3.0, power supply Peltier-cooling: USB 2.0
For maximum performance connection to USB 3.0 and USB 2.0 required
Dual connection cabling provided with delivery
4
Technical Specifications
›
Technology and Details
Ambient Conditions (Operation)
+5 °C ... +35 °C
Max. 80% relative humidity, non-condensing
› Service
Free air circulation required
Ambient Conditions (Storage)
-15 °C ... +60 °C
90% rrelative humidity at +40 °C, 80% relative humidity at +20 °C, non-condensing
Operating system
Microsoft® Windows 7 x64 (Enterprise, Ultimate) and higher
Software
ZEN lite 2012 SP 2
All frame rates are maximum values at short exposure times below readout time of the sensor. Exposure time, computer hardware operating system and software can reduce the maximum achievable
frame rates. By using binning or sensor sub regions (ROI), the frame rates can be further increased. Technical data is subject to changes due to technical progress.
5
Technical Specifications
›
Technology and Details
1
› Service
0.9
0.8
Spectral Sensitivity
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
400
450
500
550
600
650
700
Wavelength (nm)
6
Count on Service in the True Sense of the Word
›
Technology and Details
›
Service
Because the ZEISS microscope system is one of your most important tools, we make sure it is always ready
to perform. What’s more, we’ll see to it that you are employing all the options that get the best from your
microscope. You can choose from a range of service products, each delivered by highly qualified ZEISS
specialists who will support you long beyond the purchase of your system. Our aim is to enable you to
experience those special moments that inspire your work.
Repair. Maintain. Optimize.
Attain maximum uptime with your microscope. A ZEISS Protect Service Agreement lets you budget for
operating costs, all the while reducing costly downtime and achieving the best results through the improved
performance of your system. Choose from service agreements designed to give you a range of options and
control levels. We’ll work with you to select the service program that addresses your system needs and
usage requirements, in line with your organization’s standard practices.
Our service on-demand also brings you distinct advantages. ZEISS service staff will analyze issues at hand
and resolve it – whether using remote maintenance software or working on site.
Enhance Your Microscope System.
Your ZEISS microscope system is designed for a variety of updates: open interfaces allow you to maintain
a high technological level at all times. As a result you’ll work more efficiently now, while extending the
productive lifetime of your microscope as new update possibilities come on stream.
Please note that our service products are always being adjusted to meet market needs and maybe be subject
to change.
Profit from the optimized performance of your microscope
system with services from ZEISS – now and for years to come.
>> www.zeiss.com/microservice
7
The moment your data change scientific minds.
This is the moment we work for.
›
Technology and Details
› Service
// RECOGNITION
Made By Zeiss
8
Carl Zeiss Microscopy GmbH
07745 Jena, Germany
BioSciences & Materials
[email protected]zeiss.com
www.zeiss.com/axiocam
EN_40_011_060 | CZ 11-2013 | Design, scope of delivery and technical progress subject to change without notice. | © Carl Zeiss Microscopy GmbH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement