Quick Start Guide GETTING TO KNOW YOUR CHARGER PORTABLE CHARGER USBP5200 A RECHARGING THE USBP5200 B C Charge your portable devices with this convenient 5200 mAH emergency charger. Use the included USB adapter set or the USB charging cable that came with your device to power up. WHAT’S INCLUDED 1. USBP5200 2. USB Adapter Set APPLE MICRO USB MINI USB SPECIFICATIONS 1. Battery Capacity: 5200 mAH 2. DC Input: 5V / 800 mA 3. DC Output: 5V / 1A 4. Recharge Time: 8+ by USB Port. D E CONTROLS A. Power / Battery Test / LED Flash Light Button B. LED Flash Light - Press A for 5 seconds to turn on C. USB Charging Port D. USBP5200 Micro USB Recharge Port E. Battery Level Indicator STEP 1: Connect the micro USB Adapter Tip to the USB Adapter Cable. STEP 2: Connect the micro USB Adapter Cable to D. STEP 3: Connect the other end of the micro USB Adapter Cable to a powered USB port. STEP 4: Charge until the battery level indicator (E) shows full when the battery test button (A) is pressed one time. CHARGING YOUR PORTABLE DEVICES STEP 1: Select the Adapter Tip for your device. STEP 2: Connect Tip to USB Adapter Cable. STEP 3: Connect Tip to your Portable Device. STEP 4: Connect the USB Adapter Cable to C. STEP 5: Press the Power Button (A) once to start charging. APPLE MICRO USB MINI USB NOTE: Your portable device may also be charged with the USB Charging Cable that came with it, if one was included. Simply plug that USB Charging Cable into C, and then into your device and your device will begin charging.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project