L-55 LCRS - D
L-55 LCRS
high performance
left -center-right -surround all channel
rectangular in-wall loudspeaker
Noble Fidelity’s industry leading designs are
elegantly simple and correct with regard to the
Science of Physics and Wave Propagation. Sonic excellence
is fundamental to all Noble Fidelity loudspeakers.
The L-55 LCRS achieves coherent all-channel voice matching with uniform loudspeaker deployment in the finest multi-channel
home theater systems regardless of technology, license or brand.
•
True D’Appolito (mechanical & electrical) configuration provides equal acoustic performance
on & off axis in either horizontal or vertical orientation
•
Ribbed baffle design calms diffraction & near-field boundary distortion
•
Tuned for high fidelity and linear performance in standard drywall (wall) construction
•
System-concentric wide-field dispersion
•
Magnetically shielded for close proximity to phosphor active SED technology flat screen displays
•
Dual Kevlar® fiber 5 1⁄4" (135 mm) native yellow, square-woven woofers (DuPont) with butyl surrounds and phase
plug pole piece extensions for reduction of midrange coloration
•
Tetoron® 1" (25 mm) pivoting soft dome tweeter, woven-textile, lens-free, neodymium motor
•
Midrange & high frequency 3-position acoustic compensation switches
•
Audio grade polypropylene capacitor populated fiberglass board crossover circuit
•
Drivers wired with audio grade, high strand count, oxygen free copper high current speaker cable
•
T-Stop signal-powered protection circuit prevents tweeter driver failure
•
Infrared device mounting provision
•
Heavy spring-loaded gold-plated connection terminals accommodate up to 10 gauge speaker cable
•
Unit will mount horizontally between 16" on-center 2x stud construction members
•
White frame and grille is ready for mounting with a fine, finished look; as well, it may be painted to match or accent
mounting surface(s)
Frequency response: 45Hz - 21kHz ±3dB on reference axis
Sensitivity: 91dB spl (2.83V, 1m)
Nominal impedance: 8 Ohms
Recommended amplifier power: 5W - 175W on unclipped program within frequency domain
Inches: (W x H x D)
Metric: (W x H x D)
System: 15 3⁄4" x 9" x 3 1⁄2"
System: 400 mm x 229 mm x 89 mm
Cut-out: 14 7⁄16" x 7 7⁄8" x 3 1⁄2"
Cut-out: 367 mm x 200 mm x 89 mm
Net weight: 9.7 lbs each
Net weight: 4.4 kg each
Lifetime Limited Warranty
Live with Music
Noble Fidelity, LLC USA www.noble-fidelity.com
®
ISO 9001:2000 Certified Manufacture • RoHS Compliant
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement