Bona CombiEdge Short, Long power sander Operating Manual

The Bona CombiEdge Short and CombiEdge Long are edge sanders designed for the dry sanding of wood floors. They feature a powerful motor, a 6.00" sanding disc, and a dust bag for easy clean-up. The sander can be used to sand edges and corners of wood floors, as well as to remove old finishes and prepare floors for new finishes. The CombiEdge Short is perfect for sanding smaller areas, while the CombiEdge Long is ideal for sanding larger areas.

PDF Download
Document
Bona CombiEdge Short and Long Operating Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 6.00" sanding disc
  • Powerful motor
  • Dust bag for easy cleanup
  • Adjustable belt tension
  • Lifetime lubricated ball bearings
  • Easy to use

Frequently asked questions

Loosen the screws on the belt safety plate, adjust the belt tension by turning the knob manually, then tighten the screws. Make sure the belt has 1.2mm (0.05”) deflection with a center load of 1±0.1 N.

Turn the machine over, remove the screws on the disc, remove the old abrasive disc, and replace it with a new one. Secure the disc with the screws.

7.62m (25’)
Preparing document for printing…
0%