General Catalogue
General Catalogue
intercoms
videophones
access control
2014/2015
GENERAL CATALOGUE
3
General Catalogue
intercoms
videophones
access control
2014/2015
4
GENERAL CATALOGUE
Index
3000 Series
8
3000 Series Intercoms
10
3000 Series Videophones
16
3600 Series
22
5000 Series
26
5000 Series Intercoms
28
5000 Series Video monitors
32
6000 Series
38
6000 Series 2.4” Videophones
40
6200 Series 3.5” Videophones
41
6300 Series Hands Free Video monitors
42
Kristallo Series
44
Kristallo Series Intercoms
46
Kristallo Series 3.5” Videophones
50
Kristallo Series 7” Video monitors
54
8000 Series Modular Panels
56
4000 Series Modular Panels
65
Standard Range Modules
68
GSM Range Modules
76
IP Range Modules
78
Vandal Resistant Range Modules
80
Digital Systems
88
VX2200
89
VX2300
96
Telephone Systems
101
Access Control
104
Accessories
123
GENERAL CATALOGUE
5
Our Staff
6
Mrs. LINDA LAPPA
Mr. ROSSANO MARCANTONI
Financial Director
Managing Director
[email protected]
[email protected]
Mr. ELIZIO GALLUCCI
Mr. GIORGIO CORRADINI
Mr. FABIANO LIBERATI
Mr. MARCO ALICI
Mr. SIMONE BAGLIONI
Purchase & Quality Control Manager
R&D Dept Director
Design Engineer
Meccanical Design Engineer
Electronic Design Engineer
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Mr. ANTONIO CITTADINI
Mrs. MANUELA MORINI
Mrs. STEFANIA CESETTI
Mrs. LEONELLA CATALINI
Production Planner
Trading Office
Assistant Manager - Export Dept.
Chief Accounting Dept
[email protected]
[email protected]
[email protected]
[email protected]
Mr. MARCO RONGONI
Miss. PAMELA PINI
Product Manager
Assistant Manager - Export Dept.
[email protected]
[email protected]
GENERAL CATALOGUE
VIDEX UK
JOHN RICKARD
VIDEX HELLAS
DIMITRIS BAKOUSSIS
Managing Director
Managing Director
Our Company
Incorporated in 1986 and having just celebrated its 25th anniversary,
the company goes from strength to strength and has become a market leader in the design and manufacture of audio and video entry
systems along with access control systems.
Videx owes its success to its continual design and development programme, which enables it to offer one of the widest ranges of audio
and video door entry products. Along with quality and service the
products carry the “Made in Italy” label, ensuring this quality remains
one of the highest in the industry.
The company today exports approx 95% of its production to more than
45 countries all over the world, offering solutions for small, medium and
large installations, ranging from a single occupant house or apartment
through to large developments for up to 1000 apartments.
This catalogue shows the wide range of systems on offer and gives an in
depth description in each case. A number of product styles will be introduced (Known as Series), which are available across the system range.
Only the highest quality components are used in the manufacture
of Videx products. colour monitors use a 3.5” or 7” LCD TFT screen
with QVGA 320x240 resolution or 800x480 resolution, while cameras
use the latest CCD technology with a resolution of between 380-420
lines. colour cameras now all have automatic Day/Night control with
built in infra-red illumination, which offers the best colour image in
normal lighting conditions, while reverting to black and white image when in poor lighting conditions. Cameras are also now available with a wide (170 degree) angle lens when required.
Videx’s environmental policy is continually being reviewed. To this
end they have completed an installation of not one but two photovoltaic solar energy harvesting systems on the roof of their factory
capable of producing 200kW. This energy is enough to run the production facility with energy to spare.
GENERAL CATALOGUE
7
3000 Series
Intercoms & videophones
8
GENERAL CATALOGUE
3000 Series
Intercoms & videophones
The 3000 Series intercoms and videophones are the result of specific research and development into new designs and materials. One of the main new features is a 3 level volume control
for the electronic call tone. The 3000 intercoms and videophones series are compatible with the
old 900 Series and the new 3600, 5000 and 6000 Series and can be installed on the same
system (except the VX2200 digital systems where 900 Series products cannot be installed with
products from other series); the only difference between the 3000 and 900 Series is that the
3000 Series “call“ is electronic as opposed to an AC buzzer on the 900 Series. The 3000 Series
intercoms and videophones are available with additional services including:
-
Privacy of call;
Privacy of speech;
Door open signalling.
The “Privacy of call” is a service that allows the user to enable or disable incoming calls.
The service can be timed or untimed:
-
Timed privacy will automatically switch off after the programmed time elapses;
Untimed privacy must be switched on and off by the user.
The “Privacy of speech” disables the telephone when not in use. With this service the user has
two advantages:
-
The user has a private conversation with the door;
The lock can only be released by the user who is talking to the door.
On the digital systems VX2000, VX2200 and VX2300 the privacy of speech is standard on all
intercom and videophone units.
The “Door open signalling” is a service that will give the user a visual indication of whether the
door is open or closed:
-
LED ON door open;
LED OFF door closed.
To use this service, an additional wire is required from a door contact to the intercom.
GENERAL CATALOGUE
9
3000 Series
Intercoms
10
GENERAL CATALOGUE
3000 Series
Intercoms
The 3000 Series intercoms are manufactured in white ABS shockproof plastic. All intercoms in this series, have a
minimum of a “door open” button and
a “service” button (except the Smart
line Intercoms which can have a “door
open” button or both “door open” and
“service” button). For compatibility
with older systems, Videx have made
several models with AC Buzzer (12Vac)
in addition to the standard electronic
call tone.
85
55
218
3000 Series intercom
Surface mount only
GENERAL CATALOGUE
11
3000 Series
Intercoms
Art. 3101
Art. 3111
Art. 3121
Art. 3131
Art. 3141
Art. 3151
Art. 3161B
Art. 3171B
Art. 3183
Art. 3191
Art. 3197
Art. PH410
12
Art. 3102
Art. 3112
Art. 3162B
Art. 3172
Art. PH411
Art. 3113
Art. 3123
Art. INTERCOMS FOR STANDARD 4+1 SYSTEMS
3101
Intercom with electronic call tone (3 level volume) and 12Vac buzzer, “door open” and “service” push
buttons.
3102
As Art. 3101 plus privacy ON-OFF switch (Mute call).
3111
Intercom with electronic call tone (3 level volume), “door open” and “service” push buttons.
3112
As Art. 3111 plus privacy ON-OFF switch.
3113
As Art. 3112 plus “PRIVACY ON” LED.
3114
As Art. 3113 plus “DOOR OPEN” LED.
3117
Intercom with electronic call tone (3 level volume), door open button and 4 service buttons connected
to common terminal. It has a local call tone input too, for use in intercommunicating systems.
Art. WITH PRIVACY OF SPEECH
3121
Intercom with electronic call tone (3 level volume), “door open ”and “service” push buttons, incorporating
privacy of speech and lock opening.
3123
As Art. 3121 plus privacy ON-OFF switch (mute call) & “PRIVACY ON” LED.
3124
As Art. 3123 plus “DOOR OPEN” LED.
3125
Intercom with electronic call tone (3 level volume), “door open” push button, electronic privacy ON-OFF
switch, “PRIVACY ON” LED and “DOOR OPEN” LED.
3126
As Art. 3125 but with timed “Privacy”.
Art. INTERCOMS FOR STANDARD 1+1 SYSTEMS
3131
Intercom with electronic call tone (3 level volume), “door open” and “service” push buttons.
3141
As Art. 3131 but incorporating privacy of speech and lock opening.
GENERAL CATALOGUE
3000 Series
Intercoms
Art. 3114
Art. 3124
Art. 3181
Art. 3125
Art. 3126
Art. 3176
Art. 3195
Art. 3196
Art. 3117
Art. INTERCOMS FOR TWO WIRE KIT
3151
Intercom with electronic call tone (3 level volume), “door open” and “service” push buttons.
Art. INTERCOMS FOR VX2000 DIGITAL SYSTEM
3191
Intelligent Intercom with electronic call tone (3 level volume), “door open” and “service” push buttons
with built-in landing unit.
3197
As. Art. 3191 plus local intercommunication facility.
3195
Intercom with electronic call tone (3 level volume), “door open” push button, “Privacy ON-OFF” push
button, “DOOR OPEN” and “PRIVACY ON” LED’s.
3196
As Art. 3195 but with timed privacy.
Art. INTERCOMS FOR VX2200 DIGITAL SYSTEM
3161B Low cost intelligent intercom with electronic call tone (3 level volume), “door open” and “service” push buttons. It has a
reduced number of features than the 3171B (see VX2200 section). Local bell input (requires an additional wire).
3162B As Art. 3161B plus privacy “ON-OFF” switch.
3171B Intelligent Intercom with electronic call tone (3 level volume), “door open”and “service” push buttons.
3172
As Art. 3171B plus “privacy ON-OFF” switch.
3176
Intelligent Intercom with electronic call tone (3 level volume), “door open” push button, “timed privacy
ON-OFF” push button, “door open” LED and “privacy on” LED. Programmable melody and number of rings.
Art. INTERCOMS FOR VX2300 DIGITAL SYSTEM
3181
Intelligent Intercom with “door open/intercommunicating call” push button (key), BUS relay (Art. 2305)
activation button (dot), “privacy on-off” switch “door open” and “privacy on” LED’s plus call tone volume
control (3 levels). Programmable privacy duration and intercommunication mode.
3183
Intelligent intercom with “door open/intercommunicating call” push button (key), BUS relay (Art. 2305)
activation button (dot), plus call tone volume control (3 levels). Programmable intercommunication mode.
GENERAL CATALOGUE
13
3000 Series Universal range
Intercoms
Art. 3038
Art. ACCESSORY 3000 SERIES INTERCOMS
3038
Table top desk kit for 3000 Series intercoms (except Smart line).
Dimensions: 197 X 79 X 77 mm.
Art. UNIVERSAL INTERCOMS
PH410 Universal intercom for “4+1” systems with “door open” button and dry contacts “service” button. It may
be set to work in systems with electronic call tone or systems with buzzer call and has the trimmers to
adjust the volume of speech lines.
PH411 Universal intercom for “4+1” systems (polarity independent) or “1+1” systems with “door open” and dry
contacts “service” button. It may be set to work in systems with electronic call tone or systems with
buzzer call, has speech lines volume adjustment trimmers and the electronic call tone has 3 adjustable
volume levels. In addition this intercom has the local bell input, a call activated dry contact relay and the
privacy switch to enable the privacy service (call locked).
14
GENERAL CATALOGUE
3000 Series Smart range
Intercoms
Art. 3002
Art. 3012
Art. 3022
Art. 3001
Art. 3011
Art. 3021
Art. SMART LINE
3001
Intercom with buzzer call, electronic call tone (3 level volume) plus “door open” push button.
3011
As Art. 3001 with electronic call tone only (3 level volume).
3021
As Art. 3001 but with AC buzzer call only.
3002
Intercom with buzzer call, electronic call tone (3 level volume) plus “door open” and “service” push buttons.
3012
As Art. 3002 with electronic call tone only (3 level volume).
3022
As Art. 3002 but with AC buzzer call only.
NOTE:
Wall mount only
GENERAL CATALOGUE
15
3000 Series
Videophones
16
GENERAL CATALOGUE
3000 Series
Videophones
The 3000 Series videophones are manufactured in white ABS shockproof plastic.
All videophones include 5 push buttons:
- “Door Open” - ;
- “Camera Recall” - (or “service”push button depending on videophone model);
- “service” push button - ;
- “service” push button - S1;
- “service” push button - S2;
(or “privacy on-off” push button
depending on videophone model - ).
Certain models allow the service buttons
to be configured as “camera recall” push
buttons (so you can have more than one
“camera recall” push button on systems
with more than one video outdoor station) or as standard “service” push buttons
connected to a common terminal.
3000 Series videophones have a 3.5’’ LCD
TFT colour monitor.
All the models (except Art. 3481) are available with Memory Board option.
57
205,5
218
3000 Series videophone
Surface mount only
GENERAL CATALOGUE
17
3000 Series
Videophones
Art. 3411
Art. 3412
Art. 3431
Art. 3451
Art. 3471
18
Art. 3476
Art. 3456
Art. 3481
Optional Memory Board
Art. VIDEOPHONES FOR COAX VIDEO TRADITIONAL SYSTEMS
3411
Videophone with 3.5” LCD TFT colour monitor, with “door open” and “camera recall” push buttons plus
3 service buttons and an “ON” LED. Controls: 3 levels of call tone volume (both main and local), contrast
,S1, S2 may be configured as “camera recall” push buttons.
and brightness. Service push buttons
Art. VIDEOPHONES FOR TRADITIONAL SYSTEMS USING COAX OR BALANCED VIDEO SIGNAL (NOT “4+1”)
3412
Videophone with 3.5” LCD TFT colour monitor, with “door open” and “camera recall” push buttons plus
3 service buttons and an “ON” LED. Controls: 3 levels of call tone volume (both main and local), contrast
, S1, S2 may be configured as “camera recall” push buttons.
and brightness. Service push buttons
The videophone can be set up to use coax or balanced video signal.
Art. VIDEOPHONES FOR VIDEO 4+1 SYSTEMS (SIMPLIFIED WIRING)
3431
Videophone using 3.5” LCD TFT colour monitor, with “door open” and “camera recall” push buttons plus 3
service buttons and an “ON” LED. Controls: 3 levels of call tone volume(both main and local), contrast and
, S1, S2 may be configured as “camera recall”.
brightness. Service push buttons
Art. ADDITIONAL VIDEOPHONES FOR VK6N & SMVK
3451
Videophone using 3.5” LCD TFT colour monitor, with “door open” and “camera recall” push buttons plus
3 service buttons and an “ON” LED. Controls: 3 levels of call tone volume (both main and local), contrast
and brightness.
Art. VIDEOPHONES FOR VIDEX “6 WIRE” VIDEOKITS (CVK4K, CVR4KV AND CVK8K RANGE)
3456
Videophone using 3.5” LCD TFT colour monitor, with “door open”, “camera recall” and “privacy on-off” button
plus two service push buttons, “door open” and “privacy on” LED’s. The “door open” operates as the intercommunicating call button. Controls: 3 levels of call tone volume (both main and local), contrast and brightness.
GENERAL CATALOGUE
3000 Series
Videophones
Art. VIDEOPHONES FOR DIGITAL SYSTEMS WITH COAX AND NON COAX VIDEO
VX2000 DIGITAL SYSTEM (“6 WIRE” BUS VIDEO)
3497
Intelligent videophone, for coax video systems, with built-in landing unit and local intercommunication facility, using a 3.5” LCD TFT colour monitor, with “door open” push button plus 4 service
buttons and an “ON” LED. Controls: 3 levels of call tone volume (both main and local), contrast
and brightness.
VX2200 DIGITAL SYSTEM
3471
Videophone, for coax and non coax video systems, using a 3.5” LCD TFT colour monitor, with “door open”
and “camera recall” push buttons plus 3 service buttons and an “ON” LED. Programmable melody and
number of rings. Controls: 3 levels of call tone volume (both main and local), contrast and brightness.
3476
As Art. 3471 but with 2 service push buttons plus electronic “ON-OFF” timed privacy push button,
“DOOR OPEN” and“PRIVACY ON” LED’s.
VX2300 VIDEO DIGITAL SYSTEM (“2 WIRE” BUS VIDEO)
3481
Intelligent videophone using a 3.5” LCD TFT colour monitor, with “door open/intercommunicating call”,
“camera recall”, “bus relay control” and “privacy on-off” push buttons plus 1 service button (dry contact) and
“door open” plus “privacy on” LED’s. Programmable privacy duration. Controls: 3 levels of call tone volume
(both main and local), contrast and brightness.
GENERAL CATALOGUE
19
3000 Series
Videophones
Art. 3931
Art. ACCESSORY 3000 SERIES VideophoneS
3931
Table top desk kit for 3000 Series videophones.
Dimensions: 182 X 76 X 190 mm.
3980
Wall mounting plate plus pcb connection board for 3000 Series videophones.
One required for each videophone.
VIDEOPHONE WITH MEMORY BOARD
Videx is always looking to enhance the security level of its
systems. For this reason Videx have added optional video
memory functions to its already extensive range of videophones.
Videophones with memory board facility can store up to 128
video frames with relevant date and time stamp. The storage
can be triggered automatically or manually: when in automatic
mode (activated by pressing the relevant push button and
indicated by a LED) the videophone stores a still frame on each
external call (this enables the user, whilst away from home, to
have a record of the visitors who have called all with a date and
time stamp).
For manual storage the videophone stores a still frame by
pressing the relevant push button. In addition to the normal 5
push buttons, these videophones include a further 6 small push
buttons for controlling the memory board. They enable: viewing
of stored images; deleting stored images or to alter memory
board date and time. When the 127 memory locations are full,
the next frame will shift the stored frames of one position toward
the bottom of the memory deleting the frame in position 1 and
will over write the frame in position 127 (First-In-First-Out).
To order colour videophones with memory board facility
(for those models where it is available), suffix “/MV” to the
product code.
The memory board facility is not available on Art. 3481.
20
GENERAL CATALOGUE
Art. 3980
3000 Series
Videophones
Art. 33xx/CA
Art. 34xx/CA
Art. 35xx/CA
Art. 33xx/CR
Art. 34xx/CR
Art. 35xx/CR
3000 SERIES VIDEOPHONE FINISHES
In addition to standard white finish, 3000 Series Videophones are available in two additional finishes:
- Carbon Fibre Effect (add to the product code “/CA” when ordering).
- Silver Painting (add to the product code “/CR” when ordering).
GENERAL CATALOGUE
21
3600 Series
Videophones
22
GENERAL CATALOGUE
3600 Series
Videophones
3600 SERIES LOW COST HIGH SPEC COLOUR VIDEOPHONE
Based on the popular 3000 Series of videophones the 3600 videophone is both elegant
and robust, manufactured in white impact resistant ABS plastic and incorporating the latest
technology and voice switching techniques these models allow the user greater choice for their
chosen settings and operation compared to the previous 3000 Series.
Models are available in two lines: the “Standard” and the “High End”.
The “Standard” line shares many features with the 3000 Series colour videophones having similar
or improved functionality but with the benefit of reducing the prices in line with the 3000 Series
black & white videophones.
The “High End” line offers the same functions as the “Standard” line but with the addition of
hands free speech (push to talk ‘simplex’ function also available) and OSD (On Screen Display)
which offers greater functionality and flexibility to the user through on screen information,
programming menu’s and adjustment menu’s.
The 3600 Series Videophones use a high quality 3.5” colour LCD TFT display (including OSD in
the “High End” range) and house 3 large buttons on the front to manage the system operation,
depending on the model these buttons are also used for programming and adjustments. Each
button has an associated LED (Additional connections may be required).
Also standard to the 3600 videophone is a local door bell input.
Programming and adjustment options can include (depending on the model): privacy time, call
melody, number of rings, call tone volume, speech volume, picture brightness, contrast and hue.
All 3600 Series videophones require a wall mounting connection plate Art. 5980 (sold separately).
Ideal for first fixing installations the wall plate includes all terminations. The videophone then
simply plugs onto the plate and clips into position.
With the exception of the VX2300 and video kit models, all 3600 Series videophones will accept
both composite video signals (coax cable) and balanced video signal (2 wire twisted pair).
161
178
218
3600 Series videophone
Surface mount only
62
46
GENERAL CATALOGUE
23
3600 Series
Videophones
Art. 3618
Art. 3656
Art. 3676
Art. 3678
Art. 3686
24
Art. 3612
Art. 3631
Art. VIDEOPHONES FOR TRADITIONAL VIDEO DOOR ENTRY SYSTEMS USING COAX OR BALANCED VIDEO
3612
Videophone using 3.5” full colour active matrix LCD OSD monitor for traditional video door entry systems using either composite (coax cable) or balanced (twisted pair) video signal. Including 3 buttons
(“Door Open”, “Camera Recall” & “Service”) plus 3 LED’s for visual indication of all functions. Controls for
call tone volume (3 position: Privacy/mute call, medium and high), picture brightness and hue. Also
includes a local bell function. The Art. 3612 is surface mount and requires the Art. 5980 (connection
board plus wall mounting plate).
It can be used as an alternative to the Art. 3411, 3412, 3618, 5418, SL5418N and 5412.
3618
“High End” Videophone (with hands free facility) using 3.5” full colour active matrix LCD monitor for traditional video door entry systems using either composite (coax cable) or balanced (twisted pair) video signal.
Including 3 buttons (“door open”, “answer/camera recall/’push to talk’” & “privacy/call reject/service”)
plus 3 LED’s* for visual indication of all functions. Adjustments & programmable options (through OSD
menu): loudspeaker volume, call tone volume, picture contrast, brightness and hue, privacy duration,
call tone melody, number of rings, door open time and video mode. Also includes a local door bell
function. The Art. 3618 is surface mount and requires the Art. 5980 connection board and wall mounting plate. It can be used as an alternative to the Art. 3411, 3412, 3612, 5418, SL5418N and 5412.
Please note: this model requires an additional wire for 12Vdc supply and cannot be connected in parallel with the other 3000 Series models mentioned above within the same apartment.
Art. VIDEOPHONES FOR “4+1” VIDEO DOOR ENTRY SYSTEM (NO COAX)
3631
3.5’’ LCD TFT colour monitor, with “auto-recall”, “door open” and “service/auto-recall” buttons (the “service/auto-recall” button can be set either a “service” or “auto-recall” button).
3 LED’s* indicating: star-up (dot button), door open (key button and it requires a specific connection),
privacy (two dots key and it requires a specific connection).
Adjustments: melody volume (2 levels plus privacy position), hue and brightness.
GENERAL CATALOGUE
3600 Series
Videophones
Art. VIDEOPHONES FOR VIDEX “6 WIRE” VIDEOKITS (CVK4K, CVR4KV AND CVK8K RANGE)
3656
Videophone using 3.5” full colour active matrix LCD monitor for videokits mentioned above.
Including 3 buttons “door-open/intercommunication”, “camera-recall” and “privacy/service” plus 3 LED’s*
for visual indication of all functions.
Controls for call tone volume with 3 position slide switch (low, medium and high), picture brightness and
hue. Programmable options: privacy duration and number of rings. Also includes a local bell function. The
Art. 3656 is surface mount and requires the Art. 5980 connection board and wall mounting plate.
Art. VIDEOPHONES FOR VX2200 DIGITAL SYSTEMS (“6 WIRE VIDEO BUS”)
3676
Videophone using 3.5” full colour active matrix LCD monitor for VX2200 digital video door entry systems using composite (coax cable) or balanced (twisted pair) video signal. Including 3 buttons “camera
recall”, “door-open/concierge-call”, “privacy/service” plus 3 LED’s* for visual indication of all functions.
Adjustments & programmable options: call tone volume on 3 levels (low, medium, high), picture
brightness and hue, call tone melody, number of rings, video mode, privacy duration and address.
Also includes a local bell function and extension sounder output.
The Art. 3676 is surface mount and requires the Art. 5980 connection board and wall mounting plate.
Except for the service button, all other connections are the same as the Art. 5478 or SL5478N 5000 Series videophones but doesn’t require a permanent 12V.
3678
“High End” Videophone (with hands free facility) using 3.5” full colour active matrix LCD OSD monitor
for VX2200 digital video door entry systems using composite (coax cable) or balanced (twisted pair) video signal. Including 3 buttons “door-open/concierge-call”, “answer/camera recall/’push to talk”, “privacy/call reject/service” plus 3 LED’s* for visual indication of all functions. Adjustments & programmable
options (through OSD menu): loudspeaker volume, call tone volume, picture contrast, brightness and
hue, privacy duration, call tone melody, number of rings. Address and video mode are programmable
through 2 dip-switch banks. Also includes a local bell function.
The Art. 3678 is surface mount and requires the Art. 5980 connection board and wall mounting plate.
Except for the service button, all other connections are the same as the Art. 5478 or SL5478N 5000 Series
videophones.
Art. VIDEOPHONES FOR VX2300 DIGITAL SYSTEMS (“2 WIRE VIDEO”) AND “2 WIRE” VIDEOKITS
3686
Videophone using 3.5” full colour active matrix LCD monitor for VX2300.
Including 3 buttons “camera recall”, “door-open/intercommunicating call”, “privacy/service” plus 3 LED’s* for
visual indication of all functions. Adjustments & programmable options: call tone volume on 3 levels (low,
medium, high), picture brightness and hue, call tone melody, number of rings, privacy duration and address.
Also includes a local bell function.
The Art. 3686 is surface mount and requires the Art. 5980 connection board and wall mounting plate.
* The operation of some LED’s and the functions described may require additional cabling
Art. ACCESSORY 3600 SERIES VIDEOPHONE
36931
Table desktop kit for 3600 Series videophones complete
with mounting plate and pcb connection board, cable
and wall socket.
It’s made in 3 mm brushed stainless steel.
Dimensions: 116 X 215 X 149 mm.
5980
Mounting plate and pcb connection board for surface 5000
Series Eclipse video monitors (standard range) and 3600 Series.
One required to fix a surface eclipse to the wall and make
connections.
STAINLESS STEEL
Art. 36931
Art. 5980
GENERAL CATALOGUE
25
5000 Series Eclipse range
Hands Free Intercoms & Video Monitors
26
GENERAL CATALOGUE
5000 Series Eclipse range
Hands Free Intercoms & Video Monitors
The 5000 Series range of hands free (simplex or voice switched depending upon model) audio
and video monitors can be identified by their slim and compact design, allowing the 5000 Series
units to be used in areas where space is limited.
The hands free voice switching technology delivers excellent audio quality and efficient noise
cancellation (larsen effect). The choice of manufacturing technology has resulted in the slim and
compact design.
The Eclipse range has “answer/recall”, “door open” and “privacy on-off” (which are user
programmable) buttons common to all products (except Art. 5112 where the privacy service is
activated by a switch), service push buttons will vary from model to model (audio intercom or
video monitor) but will have a minimum of one. LED’s are also provided to give visual indication
of functions and system operation.
All Eclipse audio and video units are supplied surface mounting as standard. A flush mounting
kit is also available for the Eclipse video monitor.
The installation of the surface or flush audio or video monitors is carried out by attaching the flat
ribbon cable on the front panel to the pcb connector board which is housed in the wall fixing
plate (the wall fixing plate is the intercom/videophone back cover) once all cables have been
terminated into the pcb connector board the ribbon cable can be connected and the front plate
can then be securely clipped onto the wall fixing plate.
The Eclipse video monitor is only available with a colour 3.5” active matrix LCD display. Standard
controls include call tone volume (some versions include a choice of call tone melody), speech
loudspeaker volume and image brightness and hue controls.
In addition to the standard polar white finish, the Eclipse range of audio and video monitors in
surface, flush and including optional handset kits are available in two additional colours.
-
Carbon Fibre effect (add “/CA” to the product code when ordering).
Silver (add “/CR” to the product code when ordering).
VIDEX has further expanded the 5000 Series eclipse range to include intercoms and
videophones for “4+1” audio door entry systems or traditional video door entry systems using
composite video signal (coax cable) or balanced (twisted pair) and for VX2200 (“2 Wire BUS”
audio, “6 Wire Bus” video) and VX2300 (“2 Wire BUS” video) digital systems.
For harsher environmental applications, to complete the range, Videx have introduced a Vandal
Resistant hands free video monitor (Art. VR5478) and a Vandal Resistant hands free intercom
(Art. VR5178) both for use on the popular VX2200 digital system. These units are manufactured
with brushed 2.5mm stainless steel face plate and are designed for flush mounting only.
The functions and controls as indicated above may vary and will depend on the system used.
GENERAL CATALOGUE
27
5000 Series Eclipse range
Hands Free Intercoms
28
GENERAL CATALOGUE
5000 Series Eclipse range
Hands Free Intercoms
Intercoms in the 5000 Series audio Eclipse
range are identified by the compact design and
“hands free” function which can be user selected
between simplex or voice switched.
All intercoms in the 5000 Series Eclipse range have 4
(3 in the vandal resistant version) function buttons,
these include “answer”, “door open” and “service”
which are common to all models while the fourth
button’s operation will vary from model to model.
The“privacy”(no calls) and call tone volume controls
are standard to all versions. Selected versions also
incorporate loudspeaker volume control.
For harsher environmental applications Videx have
introduced a “vandal resistant” model Art. VR5178
for use on the popular VX2200 digital system.
74
23,5
164
24,5
Hands free intercom
Surface mount only
125
32,5
154,5
30
Vandal resistant line
hands free intercom
Flush mount only
GENERAL CATALOGUE
29
5000 Series Eclipse range
Hands Free Intercoms
Art. 5118N
Art. 5178N
Art. 5188N
Art. 5112
Art .VR5178
Vandal Resistant line
Art. HANDS FREE INTERCOMS FOR “4+1” AUDIO DOOR ENTRY SYSTEMS
5112
Simplex intercom with buttons to control “answer” (press to talk/release to listen), “door open” and 2 service buttons. 3 LED’s to confirm the talk/listen status, the open/close door status and the on/off status of
the privacy (no calls). A 3 position call tone volume switch which when in the left position will enable the
privacy function (no calls), in the centre position low volume and in the right position high volume.
5118N
Voice switched hands free intercom with buttons to control “answer/end conversation”, “door open”,
“privacy on/off” and “service” button. In addition there are 4 LED’s to indicate the status of “answer/end
conversation”, “door open/closed”, “privacy on/off” and auxiliary “service” status. Call tone and loudspeaker volume controls are also incorporated on this model.
Art. HANDS FREE INTERCOMS FOR VX2200 DIGITAL SYSTEM
5178N
Voice switched hands free intercom with buttons to control “answer/end conversation/recall/simplex
conversation”, “door open”, “privacy on/off” (programmable duration) and “service” button. In addition
there are 4 LED’s* to indicate the status of “answer/end conversation”, “door open/closed”, “privacy on/
off” and auxiliary “service” status. Call tone and loudspeaker volume controls, through assigned buttons, are also incorporated on this model. It is possible to program the melody (9 available), the number of rings (max 9) and the privacy service duration (max 20 hours). Surface wall mount installation.
VR5178 Same features of Art. 5178 but vandal resistant version: the “service” button that is missing, is replaced by
the “privacy” button that works also as a “service” button. Adjustments and programmable functions are
the same but are carried out in a different way. This version is available flush mount only and included a
2.5mm brushed stainless steel face plate and flush box with security screws (no mounting plate required).
Art. HANDS FREE INTERCOMS FOR VX2300 DIGITAL SYSTEM
5188N
Voice switched hands free intercom with buttons to control “answer/end conversation/recall/simplex conversation”, “door open/intercommunicating call”, “privacy on/off” (programmable duration) and “BUS relay
control” (Art. 2305) button. In addition there are 4 LED’s* to indicate the status of “answer/end conversation”,
“door open/closed”, “privacy on/off” and programming status. Call tone and loudspeaker volume controls,
through assigned buttons, are also incorporated on this model. In addition to programming required from
the VX2300 digital system (address, extension address and intercommunication mode) it is possible to program the melody, the number of rings and the privacy service duration. Surface wall mount installation.
* The operation of some LED’s and the functions described may require additional cabling
30
GENERAL CATALOGUE
5000 Series Eclipse range
Hands Free Intercoms
5000 SERIES HANDS FREE INTERCOMS FINISHES
In addition to standard white finish, Eclipse line intercoms are
available in 2 additional finishes:
- Carbon Fibre effect (add to the product code “/CA” when
ordering).
- Silver Painting (add to the product code “/CR” when ordering).
Art. 5118/CA
Art. 5178/CA
Art. 5188/CA
Art. ACCESSORY 5000 SERIES HANDS FREE INTERCOMS
5138
Table desktop kit for 5000 Series surface mounting intercom complete with cable.
It’s made in 3 mm brushed stainless steel.
Dimensions: 116 X 169 X 120 mm.
VRA983
Dry line wall flush mounting box for 5000 Series vandal resistant hands free video monitor Art.VR5178.
Art. 5118/CR
Art. 5178/CR
Art. 5188/CR
Art. 5138
Art. VRA983
STAINLESS STEEL
DECORATIVE WALL PLATES
Decorative wall plates for 5000 Series ECLIPSE line hands free
intercoms.
Available in two finishes: grey CR044G and white CR044W.
The decorative wall plates do not require any fixing screws as
the body of the intercom will secure the decorative plate when
it is secured to its wall bracket/mounting plate.
120
6
210
161,6
71,6
Art. CR044G
Art. CR044W
GENERAL CATALOGUE
31
5000 Series Eclipse range
Hands Free Video Monitors
32
GENERAL CATALOGUE
5000 Series Eclipse range
Hands Free Video Monitors
Video monitors from the 5000 Series Eclipse range can be identified by the new compact
design, high quality 3.5” TFT LCD colour display and “hands free” speech (Half duplex or simplex depending on the model). All video monitors (with the exception of the Art.SL5488N)
will operate using coax or balanced (twisted pair) video signals.
All models in the 5000 Series Eclipse range have 6 function buttons and 8 control buttons;
“door open”, “answer/recall” and “privacy” buttons are common in all models, the remaining
buttons will vary depending on the model. Among the 8 control buttons 4 are reserved to
adjust picture “brightness” and “hue” , the other 4 are used to adjust “loudspeaker volume”
“call tone volume” and to select the melody and adjust the melody volume depending on
the model.
All Eclipse models are supplied as surface mounting only, but flush mounting kits are available.
In order to install these units it is necessary to first fix the base of the video monitor containing
the connection PCB on the wall, make all necessary connections then connect the flat cable which connects the video monitor to the connection PCB, replace the cover hooking it
onto the upper part and fix in place using the supplied screw.
The Eclipse range also includes a VANDAL RESISTANT LINE.
The vandal resistant Eclipse is available for the VX2200 digital system only (Art.VR5478).
The design differs in appearance to that of the standard Eclipse having a 2.5mm thick stainless steel fascia and is flush mount only.
With the exception of the SL5488N and VR5478, all other models from the 5000 Series can
be ordered with memory board facility to allow the storing and playing back of still images
captured with a time and date stamp of the call.
204
187
164
Hands free video monitor
Flush mount
55
Hands free video monitor
Surface mount
34,5
130
10
170
125
32,5
195
30
Vandal resistant line
hands free video monitor
Flush mount only
GENERAL CATALOGUE
33
5000 Series Eclipse range
Hands Free Video Monitors
Art. SL5418N
Art. SL5478N
Art. SL5488N
Art. SL5418N+5981N
Art. SL5478N+5981N
Art. SL5488N+5981N
Slim line
Art. VIDEO MONITORS FOR TRADITIONAL VIDEO DOOR
ENTRY SYSTEMS USING COAX OR BALANCED VIDEO SIGNAL
SL5418N Hands free video monitor using 3.5” full colour active matrix LCD monitor, with “door open” , “answer/
camera recall”, “privacy on/off” buttons all with LED* indication and 3 additional service buttons.
Controls: loudspeaker volume, call tone volume, picture brightness and hue.
Programmable number of rings, privacy duration, door opening time and video mode.
Input for electronic call tone and active low input for local bell.
Also available in a version with memory board. To order suffix “/MV” to the product code.
Art. HANDS FREE VIDEO MONITORS FOR VX2200 DIGITAL
SYSTEM USING COAX OR BALANCED VIDEO SIGNAL
SL5478N Hands free video monitor using 3.5” full colour active matrix LCD monitor, with “door open/concierge call” ,
“answer/camera recall”, “privacy on/off” buttons all with LED* indication and 3 additional service buttons.
Controls: loudspeaker volume, call tone volume, picture brightness and hue.
Programmable number of rings, melody, privacy duration and video mode.
Electronic call tone generated by the unit plus active low inputs for local bell and alarm.
Also available in a version with memory board. To order suffix “/MV” to the product code.
Art. HANDS FREE VIDEO MONITORS FOR VX2300 TWO WIRE BUS DIGITAL SYSTEM
SL5488N Hands free video monitor using 3.5” full colour active matrix LCD monitor, with “door open/concierge call” ,
“answer/camera recall”, “privacy on/off” buttons all with LED* indication and 3 additional service buttons.
Controls: loudspeaker volume, call tone volume, picture brightness and hue.
Programmable number of rings, melody, privacy duration and video mode.
Electronic call tone generated by the unit plus active low inputs for local bell and alarm.
* The operation of some LED’s and the functions described may require additional cabling
34
GENERAL CATALOGUE
5000 Series Eclipse range
Hands Free Video Monitors
Art. VR5478
Vandal Resistant line
Art. HANDS FREE VIDEO MONITORS FOR VX2200 DIGITAL
SYSTEM USING COAX OR BALANCED VIDEO SIGNAL
VR5478 Intelligent Hands free video monitor using 3.5” full colour active matrix LCD OSD monitor for VX2200 digital
video door entry systems using composite (coax cable) or balanced (twisted pair) video signal.
Equipped with a vandal proof 2.5 mm stainless steel plate.
Including 3 buttons “door-open/concierge-call”, “answer/camera recall/’push to talk”, “privacy/call reject/service” plus 3 LED’s* for visual indication of all functions. Adjustments & programmable options (through OSD
menu): loudspeaker volume, call tone volume, picture contrast, brightness and hue, privacy duration, call
tone melody, number of rings. Address and video mode are programmable through 2 dip-switch banks. Also
includes a local bell function.
* The operation of some LED’s and the functions described may require additional cabling
5000 SERIES VIDEO MONITORS WITH MEMORY BOARD
As the 3000 Series, memory board facility is also avaible on the 5000 Series (except Art. VR5478).
Video monitors having a memory board can record up to 512 pictures (from the camera video) showing the date
and time of recording.
Recording can be both automatically (by pressing the corresponding push button and indicated by its LED) and manually.
In the first case the videophone stores a frame when a call is made (so while the user is away, from home he can have
a record of the visitors who’s called with the date and time of the visit).
Manual recording, instead, allows to record a frame at each button pression.
When all memory locations are full, the oldest record will be overwritten (First in first out). When the memory board
buttons are
is required in 5000 Series video monitors (Art. SL5418N, SL5456, SL5478N and SL5488N) , S1, S2 and
no longer used as service buttons, but they are used for the memory board.
In these video monitors , date, brightness, contrast and hue settings can be done through OSD menu (On Screen Display).
To order video monitors with memory board facility (for those models where it is available), suffix “/MV” to the
product code.
GENERAL CATALOGUE
35
5000 Series Eclipse range
Hands Free Video Monitors
Art. 5980
Art. 5981N
Art. 5983N
Art. 5931
Art. VRV983
STAINLESS STEEL
Art. ACCESSORY HANDS FREE VIDEO MONITORS
5980
Mounting plate and pcb connection board for surface eclipse video monitors (standard range).
One required to fix a surface eclipse to the wall and make connections.
5981N
Flush mounting kit for hands free eclipse video monitors (standard and slim range) comprised of flush
box, fixing brackets, covering frame and pcb connection board.
5983N
Flush mounting kit (for dry line walls) for hands free eclipse video monitors (standard and slim range)
comprised of fixing brackets, covering frame and pcb connection board.
5931
Table desktop kit for 5000 Series hands free videophones complete with cable and wall socket.
It’s made in 3 mm brushed stainless steel.
Dimensions: 116 X 169 X 126 mm.
VRV983 Dry line wall flush mounting box for 5000 Series vandal resistant hands free video monitor Art.VR5178.
176
6
161
210
127
Art. CR045G
Art. CR045W
DECORATIVE WALL PLATES
Decorative wall plates for 5000 Series SLIM line hands free video monitors.
Available in two finishes: white CR045W and grey CR045G. The decorative wall plates do not require any fixing
screws as the body of the videophone will secure the decorative plate when it is secured to its
wall bracket/mounting plate.
36
GENERAL CATALOGUE
5000 Series Eclipse range
Hands Free Video Monitors
Art. SL5418N/CA
Art. SL5478N/CA
Art. SL5488N/CA
Art. SL5418N/CR
Art. SL5478N/CR
Art. SL5488N/CR
Art. SL5418N/CA +5981N/CA
Art. SL5478N/CA +5981N/CA
Art. SL5488N/CA +5981N/CA
Art. SL5418N/CR+5981N/CR
Art. SL5478N/CR+5981N/CR
Art. SL5488N/CR+5981N/CR
5000 SERIES ECLIPSE LINE HANDS FREE VIDEO MONITORS FINISHES
In addition to standard white finish, Eclipse line video monitors, flush mounting kit and handset kit are available
in two additional finishes:
- Carbon Fibre effect (add to the product code “/CA” when ordering).
- Silver Painting (add to the product code “/CR” when ordering).
GENERAL CATALOGUE
37
6000 Series
Videophones
38
GENERAL CATALOGUE
6000 Series
Videophones
The 6000 Series from Videx, a low cost, easy to use, compact, minimalistic design colour
videophone.
Finished in a satin white and including a 2.4” or 3.5” high definition LCD TFT colour display,
handset and four tactile buttons for door release, door recall and other services such as ‘do not
disturb’ and service buttons depending on the model. The door open and privacy functions are
also accompanied by an indication LED (The door open LED requires an additional connection).
A picture brightness control and call tone volume adjustment is also available to the user while
additional adjustments for picture contrast, hue and on some models microphone volume are
available for the installer.
The 6000 Series (6000, 6200 and 6300) videophones are low profile surface mount units
containing all the electronics within the body of the unit and all termination connections on
convenient plug type connectors for ease of installation.
Models available are:
-
Art. 6031, 6231 for Videx 4+1 balanced video systems;
Art. 6072, 6272, 6378 for Videx VX2200 6 wire bus digital system;
Art. 6056, 6256, 6356 for CVK4K, CVK8K and CVR4KV range of video kits;
Art. 6286, 6388 for Videx VX2300 2 wire bus digital system.
27
27
124
27
144
182
102
182
182
6300 Series 3.5” hands free videophone
Surface mount only
6000 Series 2.4” videophone with handset
Surface mount only
6200 Series 3.5” videophone with handset
Surface mount only
GENERAL CATALOGUE
39
6000 Series
2.4” Videophones
Art. 6031
Art. 6056
Art. Art. 6072
VIDEOPHONES FOR “4+1” VIDEO DOOR ENTRY SYSTEM (NO COAX)
6031 Surface mount videophone incorporating a 2.4” full colour active matrix LCD monitor, with “camera
recall”, “door open” and 2 “service/camera recall” buttons (each button can be set to work as service
or camera recall button) plus 1 LED* for generic use (door opening usually).
Adjustments: call tone volume switch (3 levels), picture hue, contrast and brightness.
Art. VIDEOPHONES FOR VIDEX “6 WIRE” VIDEOKITS (CVK4K, CVR4KV AND CVK8K RANGE)
6056 Surface mount videophone incorporating a 2.4” Hi-Res full colour active matrix LCD monitor specific for
“6 wire” videokit (CVK4K, CVR4KV and CVK8K range).
It includes 4 buttons: “camera recall” “open door” “service” and “privacy”.
2 LED’s* indicate the privacy activated and open door. Programmable privacy duration and number of
rings. Intercommunicating call and door call.
Adjustments: call tone volume switch (3 levels), picture hue, contrast and brightness.
Art. VIDEOPHONES FOR VX2200 DIGITAL SYSTEM
6072 Surface mount videophone incorporating a 2.4” Hi-Res full colour active matrix LCD monitor, with
“camera recall”, “door open/concierge call”, 2 “service” buttons plus 2 LED’s* one for generic use (door
opening usually) and one to indicate privacy service enabled. Programmable settings: video mode (coax
or balanced), melody and number of rings.
Adjustments: call tone volume (2 levels plus privacy position), microphone volume, picture hue, contrast
and brightness.
* The operation of some LED’s and the functions described may require additional cabling
40
GENERAL CATALOGUE
6000 Series
3.5” Videophones
Art. 6231
Art. Art. 6256
Art. 6286
Art. 6272
VIDEOPHONES FOR “4+1” VIDEO DOOR ENTRY SYSTEM (NO COAX)
6231 Surface mount videophone incorporating a 3.5” full colour active matrix LCD monitor, with “camera
recall”, “door open” and 2 “service/camera recall” buttons (each button can be set to work as service
or camera recall button) plus 1 LED* for generic use (door opening usually).
Adjustments: call tone volume switch (3 levels), picture hue, contrast and brightness.
Art. VIDEOPHONES FOR VIDEX “6 WIRE” VIDEOKITS (CVK4K, CVR4KV AND CVK8K RANGE)
6256 Surface mount videophone incorporating a 3.5” Hi-Res full colour active matrix LCD monitor specific for
“6 wire” videokit (CVK4K, CVR4KV and CVK8K range).
It includes 4 buttons: “camera recall”, “open door” , “service” and “privacy”.
2 LED’s* indicate the privacy activated and open door. Programmable privacy duration and number of
rings. Intercommunicating call and door call.
Adjustments: call tone volume switch (3 levels), picture hue, contrast and brightness.
Art. VIDEOPHONES FOR VX2200 DIGITAL SYSTEM
6272 Surface mount videophone incorporating a 3.5” Hi-Res full colour active matrix LCD monitor, with
“camera recall”, “door open/concierge call”, 2 “service” buttons plus 2 LED’s* one for generic use (door
opening usually) and one to indicate privacy service enabled. Programmable settings: video mode (coax
or balanced), melody and number of rings.
Adjustments: call tone volume (2 levels plus privacy position), microphone volume, picture hue, contrast
and brightness.
Art. VIDEOPHONES FOR VX2300 DIGITAL SYSTEMS
6286 Surface mount videophone using 3.5” full colour active matrix LCD monitor for VX2300. Including 4
buttons “service”, “privacy/bus relay activation”, “door- open/intercommunicating call” and “camera
recall” plus 3 LED’s* for visual indication of all functions. Adjustments & programmable options: call tone
volume on 3 levels (low, medium, high), picture hue, brightness and contrast, call tone melody, number
of rings, privacy duration and address. Also includes a local bell function.
* The operation of some LED’s and the functions described may require additional cabling
GENERAL CATALOGUE
41
6000 Series
3.5” Hands Free Videophones
Art. 6356
Art. 6378
Art. 6388
Art. VIDEOPHONES FOR VIDEX “6 WIRE” VIDEOKITS (CVK4K, CVR4KV AND CVK8K RANGE)
6356 Surface mount hands free videophone incorporating a 3.5” Hi-Res full colour active matrix LCD monitor
specific for “6 wire” videokit (CVK4K, CVR4KV and CVK8K range).
It includes 4 buttons: “camera recall” “open door” “service” and “privacy”.
2 LED’s* indicate the privacy activated and open door. Programmable privacy duration and number of
rings. Intercommunicating call and door call.
Adjustments: call tone volume switch (3 levels), picture hue, contrast and brightness.
Art. VIDEOPHONES FOR VX2200 DIGITAL SYSTEM
6378 Surface mount hands free intelligent videophone incorporating a 3.5” Hi-Res full colour active matrix
LCD monitor, with “camera recall”, “door open/concierge call”, 2 “service” buttons plus 2 LED’s* one for
generic use (door opening usually) and one to indicate privacy service enabled. Programmable settings:
video mode (coax or balanced), melody and number of rings.
Adjustments: call tone volume (2 levels plus privacy position), microphone volume, picture hue, contrast
and brightness.
Art. VIDEOPHONES FOR VX2300 DIGITAL SYSTEMS
6388 Surface mount hands free intelligent Videophone using 3.5” full colour active matrix LCD monitor for
VX2300. Including 4 buttons “service”, “privacy/bus relay activation”, “door- open/intercommunicating
call” and “camera recall” plus 3 LED’s* for visual indication of all functions. Adjustments & programmable
options: call tone volume on 3 levels (low, medium, high), picture hue, brightness and contrast, call tone
melody, number of rings, privacy duration and address. Also includes a local bell function.
* The operation of some LED’s and the functions described may require additional cabling
42
GENERAL CATALOGUE
6000 Series
Videophones
6200 AND 6300 SERIES VIDEOPHONES WITH MEMORY BOARD
As for the other series, memory board facility is also avaible on the 6200 and 6300 Series.
Video monitors having a memory board can record up to 100 pictures (from the camera video) showing the date
and time of recording.
Recording can be both automatic (by pressing the corresponding push button and indicated by its LED) and manual.
In the first case the videophone stores a frame when a call is made (so while the user is away from home he can have
a record of the visitors who’s called with the date and time of the visit).
Manual recording, instead, allows to record a frame at each button press.
When all memory locations are full, the oldest record will be overwritten (First in first out).
In these videophones, date, brightness, contrast and hue settings can be adjusted through OSD menu (On Screen Display).
To order video monitors with memory board facility (for those models where it is available), suffix “/MV” to the
product code.
Art. 6931
STAINLESS STEEL
Art. ACCESSORY FOR 6000 SERIES VIDEOPHONE
6931 Table desktop kit for 6000 Series (Art. 6031, 6056 and 6072) videophones complete with cable and wall socket.
It’s made in 3 mm brushed stainless steel.
Dimensions: 116 X 204 X 120 mm.
GENERAL CATALOGUE
43
Kristallo Series
Intercoms & videophones
44
GENERAL CATALOGUE
Kristallo Series
Intercoms & videophones
Design, elegance, high technology... are just some of the words that can shortly describe the
VIDEX “high end” hands free line of intercoms and videophones: the Kristallo® Series.
Among the several features which are common to all Kristallo® models, here are the most important:
“touch sensitive” technology (you can enter any function only lightly touching the corresponding symbol on the surface of the unit);
- “hands free” mode (after answering the call by pressing the answer button, it is possible to
talk “hands free” without using the handset which will still be available, except in the 7” version, in all the other surface audio and video models for conventional use option);
- “privacy” service(this service allows to stop incoming calls so as the unit does not turn on)
- “additional service” (besides the “door open” service it is often necessary to use also an additional service such as “staircase light” or “driveway barrier”);
- 3.5” or 7” OSD colour display which is available for video units only (the user can carry out
programming or adjustments through the onscreen menu); temperature sensor and “real
time” watch are used for possible future applications in domotic systems.
- memory board facility which will give the possibility to record on microsd card pictures and
short videos (available in some models only);
- Integral temperature sensor and real time clock,
- IP version available to be used combined with Videx IP Door Entry Panels or with any Voip
Switchboard compatible with SIP protocols.
-
Among the future features which will be added to the videophone range we can find:
serial interface to use the units in domotic systems.
Intercoms and videophones from Kristallo® line are available for surface or flush mount, in
/B black or /W white finishings.
GENERAL CATALOGUE
45
Kristallo Series
Intercoms
46
GENERAL CATALOGUE
Kristallo Series
Intercoms
Among all the common features of Kristallo® line intercoms we can find:
-
An elegant and refined design;
Touch sensitive technology buttons;
Hands free mode available in both flush and surface with handset versions.
All models have 4 buttons for a specific function (such functions can vary depending on
the operating mode of the intercom: stand-by, call or conversation modes) and 4 buttons
programming and adjustment operations.
There are also 4 LED’s which provide further indications about the intercom operation (services active, conversation, door open etc.)
Kristallo® intercom flush and surface (with handset) versions are available in the following
finishes:
- White (/W)
- Black (/B)
71
29
39
189
8
63
106
42
29
182
70
Hands free intercom
Flush and surface mount versions
Intercom with handset
Surface mount only
GENERAL CATALOGUE
47
Kristallo Series
Intercoms
Art. KRA78/W
48
Art. KRA76/B
Art. INTERCOMS FOR VX2200 DIGITAL SYSTEM
KRA78
Flush mount hands free audio intercom. All buttons use capacitive touch sensor technology, 4 of these
buttons have multiple direct functions such as “answer/end conversation/recall/simplex conversation”,
“door open”, “privacy/call reject/programming menu access” (programmable duration) and “service”
button. 3 LED’s give visual indication of operations while the other 5 buttons allow navigation of the
programming menu’s and the setting of volumes.
It is possible to program the melody (9 available), the number of rings (max 9) and the privacy service
duration (max 20 hours). Also includes a local bell function.
Available in black (add to the product code “/B”) or white (add to the product code “/W”) finishes.
KRA76
As Art.KRA78 but surface mount version with telephone handset.
GENERAL CATALOGUE
Kristallo Series
Intercoms
Art. KRA981
Art. KRA983
Art. KRA038
STAINLESS STEEL
Art. ACCESSORY KRISTALLO INTERCOMS
KRA981
Wall flush mounting box for Kristallo® Series intercoms flush mounting version.
KRA983
Dry line wall flush mounting box for Kristallo® Series intercoms flush mounting version.
KRA038
Table top desk kit for surface mounting version intercoms Kristallo® Series.
It’s made in 3 mm brushed stainless steel.
Dimensions: 116 X 183 X 120 mm.
GENERAL CATALOGUE
49
Kristallo Series
Videophones
50
GENERAL CATALOGUE
Kristallo Series
Videophones
Among all the common features of Kristallo® line videophones we can find:
-
An elegant and refined design;
Touch sensitive technology buttons;
Hands free mode available in both flush and surface with handset versions;
3.5” or 7” LCD TFT colour display with OSD (ON SCREEN DISPLAY)
IP version available to be used combined with Videx IP Door Entry Panels or with any
Voip Switchboard compatible with SIP protocols
All models have 3 buttons for a specific function (such functions can vary depending on
the operating mode of the videophone: stand-by, call or conversation modes) and 5 buttons programming and adjustment operations.
The OSD allows to visualize on the screen the environment temperature, date & time, any
message concerning the system operation and it also allows to carry out programming
and adjustments through a simple screen menu.
In addition to the OSD messages, there are also 3 LED’s which provide further indications
about the videophone operation (privacy active, conversation, door open etc.)
Kristallo® videophone flush and surface (with handset) versions are available in the following finishes:
-
White (/W)
Black (/B)
29
120
190
39
8
112
155
42
29
182
189
119
3,5” hands free video monitor
Flush and surface mount versions
190
147
38
3,5” videophone with handset
Surface mount only
9
32
146
189
7” hands free video monitor
Flush and surface mount versions
GENERAL CATALOGUE
51
Kristallo Series
3.5” Videophones
Art. KRV78/B
Art. KRV88/B
Art. KRV98/B
52
Art. KRV76/W
Art. KRV86/W
Art. KRV96/W
Art. 3.5” VIDEOPHONES FOR VX2200 DIGITAL SYSTEM
KRV78
Flush mount hands free video monitor using 3.5” full colour active matrix LCD display with OSD (On
Screen Display) for video door entry systems using composite (coax cable) or balanced (twisted pair)
video signal. All buttons use capacitive touch sensor technology, 3 of these buttons have multiple
direct functions such as “door-open/concierge-call”, “answer/camera recall/simplex conversation” and
“privacy/call reject/service/programming and adjustment menu access”).
3 LED’s give visual indication of operations while the other 5 buttons allow navigation of the programming
menu’s.
Programmable options: loudspeaker volume, call tone volume, picture contrast, brightness and hue, privacy
duration, call tone melody, number of rings, address and video mode. Also includes a local bell function.
Available in black (add to the product code “/B”) or white (add to the product code “/W”) finishes.
KRV76
As Art. KRV78 but surface mounting version with handset for conventional use in addition to the hands free mode.
Art. 3.5” VIDEOPHONES FOR VIDEX “2 WIRE BUS” VIDEOKITS AND VX2300 DIGITAL SYSTEMS
KRV88
Flush mount intelligent Hands free video monitor for the VX2300 digital system using 3.5” OSD full colour
active matrix LCD monitor, with touch sensitive buttons for “door open / service”, “answer/camera recall”,
“privacy/bus relay” plus 5 navigation menu buttons and 3 LED’s related to the videophone operation.
Additional features include a real time clock, a temperature sensor and a serial RS232 port for future
integration with home automation systems.
KRV86
As Art. KRV88 but surface mounting version with handset for conventional use in addition to the hands free mode.
GENERAL CATALOGUE
Kristallo Series
3.5” Videophones
KRISTALLO VIDEOPHONES WITH MEMORY BOARD
Videx is always looking to enhance the security level of its systems. For this reason Videx have added optional video memory functions to the KRISTALLO videophones range.
Videophones with memory board facility can store up to 128
still pictures and up to 66 video clips (15 seconds duration
without audio). The images/videos are date and time stamped.
It is also possible to copy these images to a microSD card (from
1 to 16Gb), allowing the pictures and videos to be viewed on a
PC or any other device able to read the microSD card.
Automatic pictures capture enabled
Stored pictures scrolling
The picture or video clip storage can be triggered automatically or manually: when in automatic mode the videophone
stores a picture or a 15 seconds video clip upon receiving a
call (this enables the user, whilst away from home, to record
visitors who have called, the date and time stamp allows
Automatic videoclips capture enabled
Stored videoclips scrolling
you to see the time of the call). For manual storage the videophone stores a picture or a 15 seconds video clip by pressing
the manual store button. Kristallo videophones with memory
board have two additional OSD (On screen display) menus, one to manage the operation and the other to
manage and scroll through the stored pictures and videos.
The operation menu (always available when the videophone is switched on) offers: the option to store a picture
or a video clip, to enable or disable automatic storing, to manual store and to enter into picture/video scrolling. The picture/video scrolling menu offers: the option to select pictures or videos, to scroll pictures or videos,
to delete one or more pictures/videos and to copy the current viewed picture/video on to the microSD card.
When the internal memory of up to 128 pictures or 66 video clips is full, the next picture/video clip will delete the
oldest (First-In-First-Out).
To order videophones with memory board facility (for those models where it is available), suffix “/MV” to the product
code.
Art. 3.5” VIDEOPHONES FOR IP SYSTEM
KRV98
Kristallo design flush mount hands free IP videophone using a 3.5” LCD TFT High Definition display for
IP based video door entry systems. All buttons use capacitive touch sensor technology, 3 of these buttons have direct functions such as “door-open”, “answer/camera recall” and “privacy”. 3 LED’s give visual
indication of operations while the other 5 buttons allow to surf the programming menus. A built in
web server allows to set operation parameters and firmware update . Compatible with the SIP protocol, it can be connected with VOIP switchboard systems and as for VIDEX systems a self search/setting
function is available for the Videx IP devices connected on the same network.
The unit can intercommunicate with other devices of the system (outdoor stations, videophones, tablet
or PC with client installed) selecting the user to be contacted through a complete contacts’ list or through
“favorite” list (communication with outdoor stations is audio/video and it’s possible to activate the relays);
The videophone has an integrated picture memory facility with automatic or manual capture and the
stored pictures can be viewed from the built-in history of events.
The Privacy function has a programmable activation time from 30 min to 24 h or unlimited, the melody
and desktop can be customized by loading audio files and pictures and having an internet connection
on the same network you also use the “Weather Forecast” function through the google weather service.
A specific menu option allows to select and activate the relays of the outdoor stations without being
called previously.
The Ethernet interface is a 10/100 Mbit and the required power supply is a 12Vdc 1A PSU or nothing
when the videophone is connected to a PoE router or switch.
KRV96
by VIDEX
As Art. KRV98 but surface mounting version with handset for conventional use in addition to the hands free mode.
GENERAL CATALOGUE
53
Kristallo Series
7” Videophones
Art. KRV778/B
Art. KRV788/B
Art. KRV778/W
Art. KRV788/W
Art. 7” VIDEO MONITOR FOR VX2200 DIGITAL SYSTEM
KRV778 Colour OSD TFT LCD 7” 800x480 pixel resolution intelligent Handsfree video intercom for the Videx
VX2200 digital system. Touch capacitive buttons on specific areas of the display which vary depending
to the operating mode selected or to the type of menu activated.
2 LED’s* indicating the door open/close status (requires an additional cable) and the activation / deactivation of the privacy service.
An intercommunication facility is also available between devices in the same apartment (Same address).
Additionally, the KRV line is equipped with a real-time clock, temperature sensor and a serial port for
integration into home automation.
Programming and settings are available through the OSD menus.
Art. 7” VIDEO MONITOR FOR VX2300 DIGITAL SYSTEM
KRV788 Colour OSD TFT LCD 7” 800x480 pixel resolution intelligent Handsfree video intercom for the Videx
VX2300 digital system. Touch capacitive buttons on specific areas of the display which vary depending
to the operating mode selected or to the type of menu activated.
2 LED’s* indicating the door open/close status (required an additional cable) and the activation / deactivation of the privacy service.
An intercommunication facility is also available between devices in the same apartment (Same address) or
in different apartments (different addresses).
Additionally, the KRV line is equipped with a real-time clock, temperature sensor and a serial port for
integration into home automation.
Programming and settings are available through the OSD menus.
* Il funzionamento di alcuni LED può dipendere dal cablaggio: il funzionamento descritto si riferisce ad un cablaggio specifico e corretto.
54
GENERAL CATALOGUE
Kristallo Series
Videophones
Art. KRV981
Art. KRV931
Art. KRV983
STAINLESS STEEL
Art. ACCESSORY FOR KRISTALLO 3.5” VIDEOPHONES
KRV981
Wall flush mounting box for Kristallo® Series videophones flush mounting version.
KRV983
Dry line wall flush mounting box for Kristallo® Series videophones flush mounting version.
KRV931
Table desktop kit for Kristallo® Series surface mounting videophones complete with cable and wall socket.
It’s made in 3 mm brushed stainless steel. Dimensions: 116 X 183 X 145 mm.
Art. KRV7981
Art. Art. KRV7983
ACCESSORY KRISTALLO 7” VIDEO MONITORS
KRV7981 Wall flush mounting box.
KRV7983 Dry line wall flush mounting box.
GENERAL CATALOGUE
55
8000 Series
Modular System
As a direct result of the overwhelming success of
the 4000 Series, Videx have remodelled and improved the popular 800 Series and introduced,
as its replacement the Videx 8000 Series.
The Videx 8000 range of modular push button
panels allows the installer or end user to customise the appearance of the out door station
in an easy and cost effective way dictated by
the requirements of the installation.
The 8000 modules are assembled into supporting frames (which can be flush or surface
mounting) and are available to house from 1
to 9 modules. Full electrical and mechanical
compatibility has been retained, most of the
8000 Series modules have the same terminal
configuration as the 800 Series and all modules in the 8000 range will fit the 800 series
supporting frames.
The re-designed 8000 Series incorporates mechanical improvements for improved weather
resistance and up-dating of the electronics for
more reliable operation in harsher environmental conditions.
The remodelled 8000 Series front supports,
rain-shields and surface mounting units are
available in a range of finishes.
56
GENERAL CATALOGUE
8000 Series
Modular System
GENERAL CATALOGUE
57
8000 Series
Modular System
Art. 8881/A +
Art. 8837-1/A
Art. 8881/BL +
Art. 8837-1/S
8000 SERIES FINISHES
97
Module finishes:
A: Aluminium
S: Stainless Steel
120
When ordering modules, suffix the product code with /A for aluminium or /S form stainless steel.
Art. 8835-0
Art. 8837-0
Art. 8837M-0
Art. 8203-0
Art. Art. 8835-1
Art. 8837-1
Art. 8837M-1
Art. 8203-1
Art. 8835-2
Art. 8837-2
Art. 8837M-2
Art. 8203-2
“SPEAKER UNIT” FRONT PANEL MODULES FOR 1+1 INTERCOM SYSTEMS
8835-0 0 Call push button.
8835-1 1 Call push button.
8835-2 2 Call push buttons.
Art. “SPEAKER UNIT” FRONT PANEL MODULES FOR 4+1 INTERCOM SYSTEMS
8837-0 0 Call push button.
8837-1 1 Call push button.
8837-2 2 Call push buttons.
Art. “SPEAKER UNIT” FRONT PANEL MODULES FOR 3+1 INTERCOM SYSTEMS WITH ELECTRONIC CALL TONE
8837M-0 0 Call push button.
8837M-1 1 Call push button.
8837M-2 2 Call push buttons.
Art. 8000 SERIES “SPEAKER UNIT” FOR VX 2200 DIGITAL SYSTEM
8203-0 0 Call push button.
8203-1 1 Call push button.
8203-2 2 Call push buttons.
58
GENERAL CATALOGUE
8000 Series
Modular System
Art. 8003-0
Art. AArt. 8003-1
8003 1
8000 SERIES “SPEAKER UNIT” FOR VX 2000 DIGITAL SYSTEM
8003-0 0 Call push button.
8003-1 1 Call push button.
97
240
Art. 8202
Art. 8202R
Art. 8002
Art. 8000 SERIES DIGITAL PANELS FOR VX 2000 DIGITAL SYSTEM
8002
Digital call panel with built in speaker unit, 2 x 16 character LCD display, keypad illumination, 12 button
digital keypad with “Enter” and “Clear” buttons and 3 buttons for repertory name search.
Art. 8000 SERIES DIGITAL PANELS FOR VX 2200 DIGITAL SYSTEM
8202
Digital call panel with built in speaker unit, 2 x 16 character LCD display, keypad illumination, 18 button
digital keypad of which 10 are numeric and 8 alpha buttons (A..H) with “Enter” and “Clear” buttons.
8202R
Digital call panel with built in speaker unit, 2 x 16 character LCD display, keypad illumination, 12 button
digital keypad with “Enter” and “Clear” buttons and 3 buttons for repertory name search.
GENERAL CATALOGUE
59
8000 Series
Modular System
BUTTON EXPANSION MODULES (SINGLE AND DOUBLE ROW)
Button expansion modules (with single or double row buttons) are used together with audio or audio/video modules
to achieve the required number of call buttons for a system. The buttons, depending on their bridge settings, can have
a common terminal or each button can have its own common.
Art. 8842
Art. 8843
Art. 8844
Art. 8845
Art. BUTTON EXPANSION MODULE (SINGLE ROW)
8842
2 Call push buttons.
8843
3 Call push buttons.
8844
4 Call push buttons.
8845
5 Call push buttons.
Art. BUTTON EXPANSION MODULE (DOUBLE ROW)
8842D
4 call push buttons.
8843D
6 call push buttons.
8844D
8 call push buttons.
8845D
10 call push buttons.
Art. 8842D
Art. 8843D
Art. 8844D
Art. 8845D
BLANK AND INFORMATION MODULES
The blank module Art. 8840 is normally used to take the space of one module for future expansion or to complete
the door station when needed.
The Information module Art. 8846 has a 60x100 mm window, protected by a polycarbonate shield that can be
customized to show the street number or any other useful information.
Art. 8840
60
Art. BLANK AND INFORMATION MODULES
8840
Blanking module.
8846
Information module.
GENERAL CATALOGUE
Art. 8846
8000 Series
Modular System
CAMERA MODULES
The camera module from 8000 Series is the Art. 8830. The module have a build in adjustable (13 degree in any direction) CCD camera with infrared illumination LED’s, include the anti-mist system (requires an additional 13Vac/
dc power source) and may be set for video composite signal (coax cable) or for the balanced one (twisted pair
wire) according to the system requirements.
It can be used in traditional, “4+1” (combined with Art. 8835), VX2000 and VX2200 video door entry systems.
The camera is colour Day/Night.
Required power supply 12/24 Vdc.
Art. CAMERA MODULES FOR TRADITIONAL, 4+1 , VX2000 AND VX2200
VIDEO DOOR ENTRY SYSTEMS
8830/C Day/night colour camera module.
Art. 8830
ACCESS CONTROL MODULES
Videx produce a wide range of digital codelocks for “access control” systems among which there is a modular
version of the 8800 and 8900. The codelocks use the latest microprocessor based PCB, which (when combined
behind its tough stainless steel keypad) gives trouble free controlled access. The unit is easy to install and
extremely robust at a low cost. It can be used as a stand alone keypad or combined with other 8000 Series audio
and video modules.
Art. 8800
Art. 8900
Art. 8849
Art. CODELOCKS MODULES
8800
Codelock module, 2 codes/2 relay outputs.
8900
Codelock module, 100 codes/2 relay outputs.
Art. “READER” MODULES FOR CODED KEYS
8849
Videx proximity coded-key readers are available in a 8000 Series module.
The device includes the reader circuit (with a reading range between 20 and 50mm depending on the key
type used). A tri state LED and Buzzer is an intricate feature to indicate if a key has been accepted or denied.
Connection between the“VproX”reader and the Control Unit requires a minimum of 5 wires over a maximum distance of 200mts. This unit combines a polycarbonate reader window with a stainless steel or aluminium frame.
GENERAL CATALOGUE
61
8000 Series
Modular System
Art. 8852/A
Art. 8872/A
Art. 8881/BL
FRONT SUPPORTS, RAINSHIELDS, SURFACE MOUNTING UNITS
The 8000 Series modules are available in both flush and surface mounting units. The flush mounting units combine with rain shields to cover any cutouts in the wall. Surface mounting units, flush mounting units and rain
shields are available in the following finishes.
A
Aluminium.
BL
Black.
When ordering, suffix the product code with /A for aluminium or /BL for black.
FRONT SUPPORT
For flush mounted modules complete with stainless steel hinge and back box. width 115 mm., recessed depth 30 mm.
115
115
115
115
30
52
394
52
274
144
154
263
30
62
MODULES
8851
30
Art. 8852
FRONT FRAME (mm)
BACK BOX (mm)
1
115x154x22
109x144x30
8852
2
115x274x22
109x265x30
8853
3
115x394x22
109x385x30
GENERAL CATALOGUE
382
144
Art. 8851
Art. 52
30
Art. 8853
8000 Series
Modular System
RAINSHIELD
Complete with frame to be mounted between the front frame and the flush back boxes.
To protect against rain and to cover cut outs in the wall. Projection: 35 mm. Max.
140
140
140
35
35
35
409
289
169
22
22
Art. 8871
22
Art. 8872
256
Art. 8873
35
372
35
35
256
409
409
289
22
22
Art. 8874
Art. MODULES
Art. 8876
COLUMNS
22
Art. 8879
DIMENSIONS (mm)
8871
1
1
140x168,5x35
8872
2
1
140x288,5x35
8873
3
1
140x408,5x35
8874
4
2
256x288,5x35
8876
6
2
256x408,5x35
8879
9
3
372x408,5x35
GENERAL CATALOGUE
63
8000 Series
Modular System
SURFACE MOUNTING UNIT
Complete with hinge and front frame support for modules.
Projection: 62 mm Max.
140
140
140
62
62
409
289
169
62
346
226
106
50
65
50
65
Art. 8881
Art. 8882
256
256
65
50
Art. 8883
372
62
62
62
409
409
289
50
50
Art. 8884
Art. MODULES
Art. 8886
COLUMNS
50
Art. 8889
DIMENSIONS (mm)
8881
1
1
140x169x62
8882
2
1
140x289x62
8883
3
1
140x409x62
8884
4
2
256x289x62
8886
6
2
256x409x62
8889
9
3
372x409x62
Art. 8882/A
64
GENERAL CATALOGUE
4000 Series
Modular System
GENERAL CATALOGUE
65
4000 Series
Modular System
The 4000 Series is a advanced range of
modular door panels.
The 4000 Series has been designed using
the latest 3D modelling software. The design is characterised by a number of unique
features: the modules with front plate and
push button are manufactured in mirror finish stainless steel, the frame (which
is also the module support) is manufactured from one piece of die-cast aluminium alloy which gives substantial strength
to the outdoor station, modules are
attached to the module support frame using a simple but strong clip system (vandal
resistant modules are secured to the front
support frame using studs and fixing rails),
the fixing system of the front panel to the
back box (flush or surface) uses torx pin machine screws.
The modular system consists of 3 main
items:
The modules
(standard and vandal resistant line).
- The front supports
(for flush mounting).
- The surface mounting units
(for surface mounting).
-
The module support frame (flush or surface)
is hinged to the back box. This allows for
ease of cable installation and connection as
both hands are free.
The standard finish for the module support
frames and surface back boxes is embossed
metallized “gunmetal grey” while the module front plates are in mirror finish stainless
steel for the standard line and brushed finish stainless steel for vandal resistant line.
The module support frames are also available
in two other finishes: high brass PVD (gold
chromium effect) and Sky chrome PVD (silver
chromium effect).
The module front plates (for the standard
line only) are also offered in anodized aluminium and high brass PVD.
Optional
66
GENERAL CATALOGUE
4000 Series standard range modules
Modules available materials and finishes
67
“Speaker unit” front panel modules
68
Digital call panels for
Videx digital systems
71
Speaker unit front panel modules with
built-in camera for traditional video door
entry systems using coax cable or balanced
video signal (non “4+1”)
73
Camera modules
73
Blank and information modules
74
Button expansion modules
(single and double row)
74
Access control modules
75
4000 Series GSM range modules
GSM speaker unit front panel modules
76
For GSM intercom up to 10 button
audio system
76
For GSM intercom up to 50 button
audio system
77
For GSM intercom up to 255 calls audio system
77
4000 Series IP range modules
IP system
78
4000 Series vandal resistant range modules
Speaker unit modules
81
Vandal resistant modules
81
Camera modules
82
Button expansion modules
83
Modules for access control systems
83
Digital call panels for
Videx digital systems
84
Front support and surface mounting unit
Front support
86
Front support and surface mounting unit
available materials and finishes
86
Surface mounting unit
87
Antitampering
87
4000 Series
Modular System
Art. 4837-1
Art. 4837-1/HB
Art. 4837-1/A
MODULES, MATERIALS AND FINISHES
103
The 4000 Series provide two lines of modules: standard and vandal resistant.
In each line the modules are available in the following versions:
- Audio speaker unit;
- Audio/video speaker unit (standard line only);
- Button expansion modules;
- Codelocks;
- Proximity reader modules;
- Fingerprint reader modules (standard line only).
103
240
120
The module front plates of the standard line are available in 3 different finishes:
- Mirror finish stainless steel;
- Anodized aluminium;
- High Brass PVD* (physical vapour deposition) finish.
To order finishes other than the standard, suffix the product code with “/A” for anodized aluminium or “/HB” for
the high brass finish.
Vandal resistant line provide only brushed stainless finish.
* The PVD technology is impervious in environment impact and allows to coat objects with a thin metallic film of highest performances. The PVD fundamental characteristics are:
extreme superficial hardness, resistance to corrosion, wear and tear, unalterably to UV light and unassailable from solvents and acids.
GENERAL CATALOGUE
67
4000 Series
Modular System
“SPEAKER UNIT” FRONT PANEL MODULES
The audio speaker unit module is the basic part to build an outdoor station for an audio door entry system.
Modules are available with 0, 1, 2 and 4 buttons.
These modules are normally combined together with additional push button modules but in the version with 1
button, they can be used individually for systems where the number of users is equal to the number of buttons.
Art. 4837-0
Art. 4835-0
Art. Art. 4837-1
Art. 4835-1
Art. 4837-2
Art. 4835-2
Art. 4837-1D
Art. 4835-1D
FOR “3+1” AUDIO DOOR ENTRY SYSTEMS & VIDEO DOOR ENTRY SYSTEMS*
4837-0 0 Call push button.
4837-1 1 Call push button.
4837-2 2 Call push buttons.
4837-1D 2 Call push buttons.
4837-2D 4 Call push buttons.
Art. FOR “1+1” AUDIO DOOR ENTRY SYSTEMS & “4+1” VIDEO DOOR ENTRY SYSTEMS*
4835-0 0 Call push button.
4835-1 1 Call push button.
4835-2 2 Call push buttons.
4835-1D 2 Call push buttons.
4835-2D 4 Call push buttons.
* For video door entry systems, the camera module Art. 4830 is also required.
68
GENERAL CATALOGUE
Art. 4837-2D
Art. 4835-2D
4000 Series
Modular System
Art. 4838-0
Art. 4203-0
Art. 4303N-0
Art. 4838-1
Art. 4203-1
Art. 4303N-1
Art. 4838-2
Art. 4203-2
Art. 4303N-2
Art. 4838-1D
Art. 4203-1D
Art. 4838-2D
Art. 4203-2D
The 4838 Speaker Units incorporate call progress LED’s and reassurance tones along with the benefits of microprocessor technology.
The 4838 Speaker Unit is the building block for the following types of system.
- Audio door entry systems with multiple entrances without the need of the audio two entrance exchange
(Art. 502).
- Video door entry systems without the need of the control unit (Art. 890) and on multiple entrances, without
the need of the video two entrance exchange (Art. 892).
- With an additional wire, allows for the inclusion of a local door bell (only on system without privacy of
speech) having a different call tone from the external call.
The Art. 4838 (in each version) has a dip-switch that allows for the adjustment of the following settings:
- To set one of 4 different call tones.
- To set the number of rings.
- To set the conversation time.
- To set the door opening time.
In addition to conventional acoustic signals, the 4838 speaker unit gives visual indication relevant to the system
operation by the 4 LED’s on the front panel.
, if switched ON, indicates that it is not possible to make a call
- The first LED (red) marked by the symbol
because a call or a conversation is in progress (from the outdoor station from which you are calling or from
another outdoor station on system with multiple entrances).
, if switched ON, indicates that a call is in progress. The LED
- The second LED (red) marked by the symbol
will be switched OFF when the call is answered.
- The third LED (yellow) marked by the symbol
, if switched ON, indicates that it is possible to speak.
The LED will be switched OFF at the end of conversation (or at the end of the conversation time).
- The fourth LED (green) marked by the symbol
, if switched ON, means that the door lock has been operated. It will be switched OFF at the end of the “door opening” time.
As a result of the above features, the 4838 speaker units provide a cost effective solution with more features
and, at the same time simplify installation.
Art. FOR “4+1” AUDIO DOOR ENTRY SYSTEMS & VIDEO DOOR ENTRY SYSTEMS
4838-0 0 Call push button.
4838-1 1 Call push button.
4838-2 2 Call push buttons.
4838-1D 2 Call push buttons.
4838-2D 4 Call push buttons.
GENERAL CATALOGUE
69
4000 Series
Modular System
Art. 4838-0
Art. 4203-0
Art. 4303N-0
Art. Art. 4838-1
Art. 4203-1
Art. 4303N-1
Art. 4838-2
Art. 4203-2
Art. 4303N-2
Art. 4838-1D
Art. 4203-1D
Art. 4838-2D
Art. 4203-2D
FOR VX2200 DIGITAL AUDIO/VIDEO DOOR ENTRY SYSTEMS (2 WIRE BUS AUDIO, 6 VIDEO)
4203-0 0 Call push button.
4203-1 1 Call push button.
4203-2 2 Call push buttons.
4203-1D 2 Call push buttons.
4203-2D 4 Call push buttons.
Art. FOR VX2300 (2 WIRE BUS) DIGITAL AUDIO/VIDEO DOOR ENTRY SYSTEMS
4303N-0 0 Call push button.
4303N-1 1 Call push button.
4303N-2 2 Call push buttons.
SPEAKER UNIT FRONT PANEL MODULES WITH BUILT-IN CAMERA FOR VX2200 DIGITAL SYSTEM (“6 WIRE BUS” VIDEO)
USING COAX OR BALANCED VIDEO SIGNAL
The 4283 unit is an intelligent front panel based on a “6 wire” BUS intercom system that enables the connection of
traditional push buttons. This unit is housed in a single 4000 Series module and incorporates the functional interface connections from functional to digital bus, the speaker module with 0, 1 or 2 call buttons also includes a high
quality CCD Camera and infrared illumination LED’s. In addition to conventional acoustic signals, the 4283 speaker
unit gives visual indication relevant to the system operation by the 4 LED’s on the front panel.
For each version (0, 1 or 2 buttons) there are 2 models available with the following camera options: colour Day/
Night or colour Day/Night with Wide Angle camera.
In the first model the built-in camera has horizontal & vertical adjustment of 10 degrees while with the Wide Angle
the camera is fixed but the field of view is 170 degrees.
The camera can be set to work with composite video signal (coax cable) or balanced video signal (one twisted pair).
Available in all the 4000 Series finishes. This device enables the connection of up to 32 functional push buttons
using standard 4000 Series extension module panels Art. 4842, 4843, 4844, 4845 and relevant double button version 4842D, 4843D, 4844D and 4845D. The 4283 can work with any intercom and videophone available for the
VX2200 from 900, 3000 or 5000 Series range.
4283 -0
0 Call push button.
4283 -1
1 Call push button.
4283 -1D 2 Call push button.
Optional
Art. 4283-0
To order the Wide Angle camera add “/wide” to the code.
70
GENERAL CATALOGUE
Art. 4283-1
Art. 4283-1D
4000 Series
Modular System
Optional
Art. 4202V
Art. 4302NV
Art. 4202RV
Art. 4302NRV
Art. 4202
Art. 4302N
Art. 4202R
Art. 4302NR
4000 SERIES DIGITAL CALL PANELS FOR VIDEX DIGITAL SYSTEMS
These panels are compatible with the 4000 Series modular system and in each version (audio or audio/video) they
have the size of two 4000 Series modules. The front panel finishes are the same as for the 4000 Series Modules.
Complementing all digital door panels manufactured by Videx is the ability for all users to have their own unique
access code. The access code can have up to six digits and is blind to onlookers.
Art. DIGITAL CALL PANELS FOR VX2200 DIGITAL SYSTEMS (2 WIRE BUS AUDIO, 6 VIDEO)
4202
In addition to the speaker unit functions, the panel includes a 2x16 Characters LCD display with blue
back light , the illumination LED’s for the keypad plus a keypad with 18 buttons of which 10 are numeric buttons (0..9), “ENTER” and “CLEAR” buttons plus 6 alpha buttons (A..F).
The panel has the speech board facility (optional chip installation) to supply audio messages in
addition to written messages provided from the display.
4202V
As the 4202 plus a built-in CCD camera with IR illumination LED’s. For the panel there are 2 models
available with the following camera options: colour Day/Night or colour Day/Night with Wide Angle
camera.
In the first model the built-in camera has horizontal & vertical adjustment of 10 degrees while with the
Wide Angle the camera is fixed but the field of view is 170 degrees.
The camera can be set to work with composite video signal (coax cable) or balanced video signal (one
twisted pair).
To order the Wide Angle camera add “/wide” to the code.
GENERAL CATALOGUE
71
4000 Series
Modular System
Optional
Art. 4202V
Art. 4302NV
Art. 4202RV
Art. 4302NRV
Art. 4202
Art. 4302N
Art. 4202R
Art. 4302NR
Art. DIGITAL CALL PANELS FOR VX2200 DIGITAL SYSTEMS (2 WIRE BUS AUDIO, 6 VIDEO)
4202R
In addition to the speaker unit functions, the panel includes a 2x16 Characters LCD display with blue
back light , the illumination LED’s for the keypad plus a keypad with 15 buttons of which 3 are used for
the repertory name, 10 are numeric buttons (0..9) plus “ENTER” and “CLEAR” buttons.
The panel has the speech board facility (optional chip installation) to supply audio messages in addition to written messages provided from the display.
4202RV As the 4202R plus a built-in CCD camera with IR illumination LED’s. For the panel there are 2 models available with the following camera options: colour Day/Night or colour Day/Night with Wide Angle camera.
In the first model the built-in camera has horizontal & vertical adjustment of 10 degrees while with the
Wide Angle the camera is fixed but the field of view is 170 degrees.The camera can be set to work with
composite video signal (coax cable) or balanced video signal (one twisted pair).
To order the Wide Angle camera add “/wide” to the code.
Art. DIGITAL CALL PANELS FOR VX2300 DIGITAL SYSTEMS (2 WIRE BUS)
4302NV In addition to the speaker unit functions, the panel includes a high quality CCD camera with IR illumination LED’s, a 2x16 Characters LCD display with blue back light , the illumination LED’s for the keypad
plus a keypad with 18 buttons of which 10 are numeric buttons (0..9), “ENTER” and “CLEAR” buttons
plus 6 alpha buttons (A..F). The panel has the speech board facility (optional chip installation) to supply
audio messages in addition to written messages provided from the display. For the panel there are 2
models available with the following camera options: colour Day/Night or colour Day/Night with Wide
Angle camera. In the first model the built-in camera has horizontal & vertical adjustment of 10 degrees
while with the Wide Angle the camera is fixed but the field of view is 170 degrees.
The module is available also in audio version Art. 4302N.
4302NRV In addition to the speaker unit functions, the panel includes a high quality CCD camera with IR illumination LED’s, a 2x16 Characters LCD display with blue back light , the illumination LED’s for the keypad plus
a keypad with 15 buttons of which 3 are used for the repertory name, 10 are numeric buttons (0..9) plus
“ENTER” and “CLEAR” buttons. The panel has the speech board facility (optional chip installation) to supply
audio messages in addition to written messages provided from the display.
For the panel there are 2 models available with the following camera options: colour Day/Night or colour
Day/Night with Wide Angle camera. In the first model the built-in camera has horizontal & vertical adjustment of 10 degrees while with the Wide Angle the camera is fixed but the field of view is 170 degrees.The
module is available also in audio version Art. 4302NR.
To order the Wide Angle camera add “/wide” to the code.
72
GENERAL CATALOGUE
4000 Series
Modular System
SPEAKER UNIT MODULES WITH IN BUILT CAMERA FOR TRADITIONAL VIDEO DOOR ENTRY SYSTEMS WITH
COAX CABLE OR BALANCED VIDEO SIGNAL (NON 4+1)
These modules are another novelty introduced in the 4000 Series, because in the same reduced size of one module they
incorporate both the speaker unit and a high quality CCD type camera complete with infrared illumination LED. Audio/
video module is the basic part required to build an outdoor-station for a video door entry system.
The module is available in 3 versions depending on the number of buttons: 0,1 and 2 buttons. Normally these modules
are combined together with additional push button modules but if the system is for 1 or 2 buttons in this case only the
self contained 1 or 2 button module is required.
For each module version 2 types of cameras are available: Day/Night colour or Day/Night colour Wide Angle cameras.
In the first type the camera has a horizontal and vertical adjustment (10 degrees) while the Wide Anglec amera type is
fixed with a horizontal angle of 170° .
The camera can be set for video composite signal (coax cable) or for the balanced one (twisted pair wire).
Optional
Art. 4832-0
Art. 4832-1
Art. 4832-1D
Art. FOR TRADITIONAL VIDEO DOOR ENTRY SYSTEMS WITH COAX CABLE
4832-0/C
0 call button with colour camera.
4832-1/C
1 call button with colour camera.
4832-1D/C
2 call buttons with colour camera.
To order the Wide Angle camera add “/wide” to the code.
CAMERA MODULES
The standard line of the 4000 Series modules consists of 2 camera modules: the
Art. 4830 that can be used in traditional, “4+1”, VX2000 and VX2200 video door entry systems and Art. 4330N that is specific for VX2300 digital systems. The built-in
camera is CCD type with infrared illumination LED. Both versions are available in 2
models depending on the type of camera used: colour Day/Night and colour Day/
Night Wide Angle cameras.
In the first type the camera has an horizontal and vertical adjustment (10 degrees)
while the Wide Angle camera type is fixed with a horizontal angle of 170 degrees.
In Art. 4830 The camera can be set for video composite signal ( coax cable) or for
the balanced one (twisted pair wire).
In Art. 4330N there is an input for a possible external video signal which may be
switched through the appropriate button in videophones for Vx2300 digital system.
Art. 4830
Art. 4330N
Optional
Art. CAMERA MODULES FOR TRADITIONAL, 4+1 , VX2000 AND VX2200 VIDEX VIDEO DOOR ENTRY SYSTEMS
4830
colour camera module.
Art. CAMERA MODULES FOR VX2300 DIGITAL SYSTEM
4330N
colour camera module with input for external camera.
To order the Wide Angle camera add “/wide” to the code.
GENERAL CATALOGUE
73
4000 Series
Modular System
BUTTON EXPANSION MODULES
(SINGLE AND DOUBLE ROW)
Button expansion modules (with single or double row buttons) are used together with audio or audio/video modules to
achieve the required number of call buttons for a system. Each module has a terminal connection that house 2 terminals
for each button: the buttons, depending on jumper settings, can have a common terminal or each button can have its
own common. (to simplify the use when used with the 4203,4303N & 4283 on digital systems).
Art. 4842
Art. 4843
Art. 4844
Art. 4845
Art. BUTTON EXPANSION MODULE (SINGLE ROW)
4842
2 call push buttons.
4843
3 call push buttons.
4844
4 call push buttons.
4845
5 call push buttons.
Art. BUTTON EXPANSION MODULE (DOUBLE ROW)
4842D
4 call push buttons.
4843D
6 call push buttons.
4844D
8 call push buttons.
4845D
10 call push buttons.
Art. 4842D
Art. 4843D
Art. 4844D
Art. 4845D
BLANK AND INFORMATION MODULES
The blank module Art. 4840 is normally used to take the space of one module for future expansion or to complete
the door station when needed.
The Information module Art. 4846 has a 85x110 mm window, protected by a polycarbonate shield that can be
customized to show the street number or any other useful information. The information module Art. 4820 is a new
digital module that provides visual (through a display) and verbal (through the speech board) during the system
operation: it is compatible with the 4837,4832,4833 and 4838 (only 4+1 mode) speaker units.
This module is available with many different languages including English.
Art. 4840
74
Art. DESCRIPTION
4840
Blank module.
4846
Information module.
4820
Call progress digital information module.
GENERAL CATALOGUE
Art. 4846
Art. 4820
4000 Series
Modular System
ACCESS CONTROL MODULES
VIDEX produce access control systems that can work stand-alone or can be incorporated with audio or video door
entry systems. For more details about access control systems see the relevant section of this catalogue.
Art. 4800
Art. 4801
Art. 4900
Art. Art. 4849
Art. 4850
Art. 4850/P
Art. 4821C
Art. 4823C
CODE LOCK MODULES
All the 4000 Series codelock modules can operate in stand-alone mode. The new Art. 4801 module can also work in
network mode when linked by a serial RS-485 BUS to a remote control unit (VX1050, VX1052). The programming of
the modules can be carried out through the module keypad or, for the Art. 4801, through a pc software (Art. 4829
CD programming software plus connection cable).
4800
Codelock module, 3 codes / 3 Relays.
4801
Codelock module, up to 3000 codes / 2 Relays.
4900
Codelock module, 100 codes / 3 Relays.
Art. PROXIMITY KEY READER MODULES
The 4000 Series of proximity modules has been expanded to include two new stand alone units: Art. 4850
and Art. 4850/P. Both models can be programmed manually or the Art. 4850P via an RS-232 serial connection to a
PC (Art. 4829 CD programming software plus connection cable).
The 4850 will control up to 100 keys (fobs) while the 4850/P up to 1000 keys (fobs) and can be networked
when linked by a serial RS-485 Bus to a remote control unit (VX1050, VX1052). The Art. 4849 reader module requires
one of the following control units to operate (VproX20, 100, 250, 1,000, or 4,000).
4849
Proximity key reader module.
4850
Proximity key reader module, 1 relay, 100 keys.
4850/P Proximity key reader module, 1 relay, 1000 keys.
4829
CD Programming software plus connection cable for VIDEX modules Art. 4850/P and Art. 4801. The
software allows to program the users in the unit memory. With the PC connected and the software running, it allows also to have an events LOG.
Art. FINGERPRINT READER MODULES
To compliment and expand the range of access control modules for the 4000 Series. Videx have introduced two
Fingerprint readers modules Art. 4821C (1000 fingerprints) and Art. 4823C (3,000 fingerprints). Programming of
both versions can be carried out using the on board switches situated on the rear of the units or by a PC via a serial
RS-232 connection. The Art. 4821C and Art. 4823C are able to work as stand-alone units or networked, using remote
control units (VX1050 or VX1052) via an RS-485 serial Bus.
4821C
Fingerprint reader capacitive sensor, 3 relays, 1000 fingerprints.
4823C
As Art. 4821C but up to 3.000 fingerprints.
GENERAL CATALOGUE
75
4000 Series GSM
Modular System
GSM SPEAKER UNIT FRONT PANEL MODULES
GSM Door Entry systems are the latest development from Videx, employing mobile phone technology to operate
automatic gates, doors or remote sites installations. Based on the 4000 Series entry panel design, the GSM/amplifier
is totally self contained and only requires an external power supply and antenna. The system retains all the facilities
of the 4000 Series which can include multiple doors, coded access, proximity access and bio access features. Available
from a 1 button to a 50 button system or a digital door panel which will call up to 1000 apartments, all can have up to
250 (2000 on the digital) built in dial to open numbers, this allows a user or users to call the entry panel and activate the
lock output relay at no charge to the caller. The digital panel also includes the facility for up to 1000 access codes. Each
button on the door panel can be programmed with two telephone numbers (Expandable to 5 numbers on the 4810N,
allowing the system to divert a call if the number is busy or not answered. Push to exit and auxiliary inputs / outputs
along with a dry contact timed lock output relay are standard. Programming the unit is carried out using either SMS
text messaging or by a USB interface to a PC (except vandal resistant range). Programming options include the facility
to program the telephone number, program the divert numbers, lock relay time, call time, microphone and speaker
volume as well as many other features. In addition to standard modules and the digital version, the GSM modules are
also avaliable in the VR4K vandal resistant range. The speaker module can include 0 to 3 buttons, using the VR4K button expansion modules this can be expanded to 10 buttons.
VR4KGSM-0
VR4KGSM-1
VR4KGSM-2
Art. FOR GSM INTERCOM UP TO 10 BUTTON AUDIO SYSTEM
VR4KGSM-0
0 Call push button.
VR4KGSM-1
1 Call push button.
VR4KGSM-2
2 Call push button.
VR4KGSM-3
3 Call push button.
VR4KGSM-1NP 1 call push buttons with name plate holder.
76
GENERAL CATALOGUE
VR4KGSM-3
VR4KGSM-1NP
4000 Series GSM
Modular System
Art. 4810N-0
Art. 4810N-1
Art. 4810N-2
Art. FOR GSM INTERCOM UP TO 50 BUTTON AUDIO SYSTEM
4810N-0
0 Call push button.
4810N-1
1 Call push button.
4810N-2
2 Call push buttons.
Art. 4810N-1D
Art. 4810N-2D
4810N-1D 2 Call push buttons.
4810N-2D 4 Call push buttons.
Art. 4802
Art. 4802R
Art. FOR GSM INTERCOM UP TO 1000 CALLS AUDIO SYSTEM
4802
Digital GSM door panel for up to 1000 apartments with 2x16 Character LCD display with blue back
light, illumination LED’s for the keypad and keys 0-9 Enter and Clear along with letters A-F. Also included is the speech board to announce key presses and call progress information and USB interface
for programming (PC Software and lead sold separately).
4802R
Digital GSM door panel for up to 1000 apartments with 2x16 Character LCD display with blue back
light, illumination LED’s for the keypad and keys 0-9 Enter and Clear along with scroll keys to search
by name. Also included is the speech board to announce key presses and call progress information
and USB interface for programming (PC Software and lead sold separately).
GENERAL CATALOGUE
77
4000 Series IP
Modular System
INTRODUCTION
by VIDEX
Systems based on IP technology (cameras, phones, home automation systems, etc) are becoming more and more
popular and giving their wide spread use VIDEX has developed a door entry system based on this technology.
After 2 years of research in collaboration with an ITALIAN company specializing in this field, Videx introduces its
first line of IP door station modules for the 4000 Series modular system with built-in camera. A line which has, as a
VIDEX tradition, the label “Made in Italy” which is true for both the mechanics and the PCB.
Thanks to its compatibility with switch boards and “VOIP” servers which use the “SIP” protocol, these new IP modules allow a whole new range of applications, from residential use to industrial use.
The user is able to respond to calls coming from the outdoor station with one or more devices such as tablets, smart
phones, VOIP phones, personal computers or VIDEX IP videophones(under development): thanks to the IP technology, the communication can be done both locally via a LAN or private network or remotely using LAN and WAN).
Tablet
Smartphone
WI-FI
connection
VIDEX
IP videophone
videoph
LAN
AN cab
cable
LAN cables
WI-FI Router
VIDEX
IP outdoor station
VOIP
videophone
videopho
one
World Wide Web
PC
78
GENERAL CATALOGUE
4000 Series IP
Modular System
IP DOOR PANEL MODULES WITH IN BUILT CAMERA
Art. 4503 is available in 3 versions according to the number of call buttons: Art. 4503-0 (0 button),
Art. 4503-1 (1 button) and Art. 4503-1D (2 buttons). In order to achieve systems with up to 64
call buttons these modules can be combined with an expansion button module Art. 4513 and
Optional
standard expansion pushbutton modules Art. 4842 to 4845D. It is possible to set one or more IP
addresses to each call button to identify the destination of the call.
Audio and video communication via SIP is possible using the supplied software clients for Microsoft Windows,
Linux, Android and soon for IOS. (If used with switchboards or “VOIP” server, communication the system must be
compatible with the MPEG-4 Codec in order to have video).
An inbuilt web server is available for the configuration and programming using a web browser.
The camera is a “Day/Night” colour CCD with autofocus, it includes infra red LED’s and it can be adjusted both vertically and horizontally up to 10°.
Two dry contacts relays are included which can be activated separately.
Power supply: 12Vdc @ 550mA
Contact relay: Max 24Vac/dc @3A
Working temperature: -10 +50° C
Art. IP DOOR PANEL MODULES
4503-0
0 button.
4503-1
1 button.
4503-1D 2 buttons.
Art. 4503-0
Art. 4503-1
Art. 4503-1D
To order the Wide Angle camera add “/wide” to the code.
BUTTON EXPANSION INTERFACE MODULE
Art. 4513 is similar to a traditional expansion module push-button, but it incorporates an interface that allows to
connect the Art. 4503 and expand to 64 buttons (Art. 4842 .. 4845D) including those of the module. There are 8
available versions according to the number of buttons: Art. 4513-2, -3, -4, -5,-2D,-3D, 4D-and-5D.
The in-built buttons are numbered from 1 to 10, while as for the buttons connected externally the number depends on the connection to the matrix (Ex. 1A = 1, 1B = 2 ... 1H = 8).
Art. 4503 makes the configuration of the IP address/addresses which can be assigned to each button.
Power supply: 12Vdc @ 550mA
Working temperature: -10 +50° C
Art. BUTTON EXPANSION INTERFACE MODULES
4513-2
2 call buttons.
4513-3
3 call buttons.
4513-4
4 call buttons.
4513-5
5 call buttons.
4513-2D
4 call buttons.
4513-3D
6 call buttons.
4513-4D
8 call buttons.
4513-5D
Art. 4513-2
Art. 4513-3
Art. 4513-4
Art. 4513-5
Art. 4513-2D
Art. 4513-3D
Art. 4513-4D
Art. 4513-5D
10 call buttons.
GENERAL CATALOGUE
79
4000 Series Vandal Resistant range
Modular System
80
GENERAL CATALOGUE
4000 Series Vandal Resistant range
Modular System
* Art. VR4KCLM
* Art. VR4KAM-1
VANDAL RESISTANT MODULES
The 4000 Series has been expanded to include a new range of vandal resistant modules.
The modules in this range are manufactured from brushed 2.5 mm (12 SWG) stainless steel. The electronics are
secured to the front plate and are protected by a covering box which is sealed to the front fascia, all buttons are
IP68 rated and manufactured in stainless steel. To give greater strength to the unit the modules are secured to the
4000 front support frame using studs and fixing rails.
* The product code is relevant to the module shown in the photo.
SPEAKER UNIT MODULES
The audio speaker module is the basic unit required to build an outdoor station for an audio door entry system.
Amplifier modules are available with 0, 1, 2 and 3 buttons that can be used individually for a 1, 2 or 3 button door
entry system or combined with additional VR4KBM button modules for larger systems.
Art. VR4KAM-0
Art. VR4KAM2W-0
Art. VR4KAM-1
Art. VR4KAM2W-1
Art. VR4KAM-2
Art. VR4KAM2W-2
Art. VR4KAM-3
Art. VR4KAM2W-3
VR4KAM-1NP
VR4KAM2W-1NP
VR4KAMK-1NP
The introduction of microprocessor technology to the standard range of 4000 Series audio modules (VR4KAM)
forms the building block for the following range of audio and video door entry systems.
- Audio door entry systems with multiple entrances eliminating the need of the audio 2 entrance switching relay (Art. 502).
- Video door entry systems using coax or balanced video, eliminating the need of the Art. 890 video control unit and on
multiple doors replacing the two entrance switching relay Art. 892 with one Art. 506N relay for each door.
The VR4KAM has a bank of dip-switches for adjustment of the following settings.
- To set the conversation time 1 minute or 2 minutes.
- To set the door lock release time (2, 4, 8 or 20 seconds).
- To set the speech mode.
In addition to the dip switches, two trimming pots are available for adjustment of the microphone and loudspeaker
volumes and a jumper to allow for the adjustment of the reassurance tone volume (high, low or disabled).
The three LED’s on the front panel give visual indication to the visitor of the systems operation.
- The yellow speak LED illuminates when the call has been answered and a conversation can commence.
- The green open LED illuminates to indicate the lock release has been activated.
- The red busy LED illuminates to indicate that the system is busy.
GENERAL CATALOGUE
81
4000 Series Vandal Resistant range
Modular System
Art. SPEAKER UNIT MODULES FOR “4+1” AUDIO DOOR ENTRY AND VIDEO DOOR ENTRY SYSTEMS
VR4KAM-0
0 call push button.
VR4KAM-1
1 call push button.
VR4KAM-2
2 call push buttons.
VR4KAM-3
3 call push buttons.
VR4KAM-1NP 1 call push buttons with name plate holder.
VR4KAMK-1NP 1 call push buttons with name plate holder. Specific for audio kits and video kits.
The VR4KAM2W is a 4000 Series digital ‘two wire’ vandal resistant speaker module which has been specifically
developed for the Videx VX2200 (two wire audio and six wire video) bus systems. This module offers the same
features as the VR4KAM with the addition of being able to connect up to 23 individual buttons using the vandal
resistant VR4KBM button expansion modules.
Art. SPEAKER UNIT MODULES FOR VX 2200 DOOR ENTRY SYSTEMS (2 WIRE AUDIO AND 6 WIRE VIDEO)
VR4KAM2W-0
0 call push button.
VR4KAM2W-1
1 call push button.
VR4KAM2W-2
2 call push buttons.
VR4KAM2W-3
3 call push buttons.
VR4KAM2W-1NP 1 call push buttons with name plate holder.
CAMERA MODULES
The vandal resistant line of the 4000 Series modules consists of 1 camera module: VR4KCM.
The Art. VR4KCM can be used in video video door entry systems: traditional (combined
with Art. VR4KAM), VX2200 (combined with Art.V R4KAM2W) or Videokit (combined with
Optional
Art. VR4KAMK).
The module built-in camera is CCD type with infrared illumination LED and it is available in 2 models depending on
the type of camera used: colour Day/Night or colour Day/Night Wide Angle cameras.
In the firs type the camera has an horizontal and vertical adjustment (10 degrees) while the Wide Angle camera type
is fixed with ahorizontal angle of 170 degrees.
The camera can be set for video composite signal ( coax cable) or for the balanced one (twisted pair wire).
Art. CAMERA MODULES FOR VIDEO DOOR ENTRY USING COAX OR
BALANCED VIDEO SIGNALS
VR4KCMC
Day/night colour camera with infrared LED’s.
VR4KCMCW
Wide Angle Day/Night colour camera with infrared LED’s.
To order the Wide Angle camera add “/wide” to the code.
82
GENERAL CATALOGUE
Art. VR4KCMC
Art. VR4KCMCW
4000 Series Vandal Resistant range
Modular System
BUTTON EXPANSION MODULES
The 4000 Series vandal resistant button expansion modules are used in conjunction with the audio and video
modules to achieve the required number of call buttons for a system. Six variations are available from 4 to 9 push
buttons with each button having two connection terminals.
Art. BUTTON EXPANSION MODULES
VR4KBM-4 4 call push buttons.
VR4KBM-5 5 call push buttons.
Art. VR4KBM-4
Art. VR4KBM-5
Art. VR4KBM-6
VR4KBM-6 6 call push buttons.
VR4KBM-7 7 call push buttons.
VR4KBM-8 8 call push buttons.
VR4KBM-9 9 call push buttons.
Art. Art. VR4KBM-7
Art. VR4KBM-8
Art. VR4KBM-9
Art. VR4KBM-2NP
Art. VR4KBM-3NP
Art. VR4KBM-4NP
BUTTON EXPANSION MODULES
WITH NAME PLATE HOLDER
VR4KBM-2NP 2 call push buttons.
VR4KBM-3NP 3 call push buttons.
VR4KBM-4NP 4 call push buttons.
Art. BLANK AND INFORMATION MODULES
VR4KIFM
Information module.
VR4KBLM Blank module.
Art. VR4KIFM
Art. VR4KBLM
MODULES FOR ACCESS CONTROL SYSTEMS
VIDEX produce access control systems that can work stand-alone or can be incorporated with audio or video door
entry systems. For more details about access control systems see the relevant section of this catalogue.
Art. MODULES FOR ACCESS CONTROL SYSTEMS
VR4KCLM
Codelock module as Art. 4800.
VR4KVPM VProx module as Art. 4849.
Art. VR4KCLM
Art. VR4KVPM
GENERAL CATALOGUE
83
4000 Series Vandal Resistant range
Modular System
135
44
9
61
280
45
Standard
Art. 4212V + Art. 4882
84
Art. 4212RV + Art. 4882
Art. DIGITAL CALL PANELS FOR VX2200 DIGITAL SYSTEMS (2 WIRE BUS AUDIO, 6 VIDEO)
4212V
4000 Series Vandal resistant range (front plate in brushed stainless with 2mm thickness) digital call
panel for Videx VX 2200 digital systems (2 wire BUS audio, 6 wire BUS video). This panel is compatible with the 4000 Series modular system and has the size of two 4000 Series modules.
Complementing all digital door panels manufactured by Videx is the ability for all users to have
their own unique access code (each apartment can have more than one access code). The access
code can have up to six digits and is blind to onlookers. Also,integrated into the panel is a proximity
reader enabling allowing a number of proximity fobs to be stored and used individually or in combination with the access code to enter the building. In addition to the speaker unit functions, the
panel includes a 128 x 64 pixel graphical LCD display blue back lit (to provide visual and text messages in multiple languages guiding a visitor through the panel operation) plus a keypad with 18
blue back lit buttons 6 of which are alpha buttons (A..F), 10 are numeric buttons (0..9) plus “ENTER”
and “CLEAR” buttons. The tenants can be called by dialling the relevant apartment code.
To complement the visual messages provided from the display, the panel has the speech board
facility (optional chip installation) to supply audio messages concerning the system operation. The
built-in camera is a colour CCD wide angle day/night camera with IR illumination LED’s (the day/
night camera provides the best quality of view in any light condition and the wide angle camera
provides a viewing angle of 170 degrees). The camera can be set to work with composite video
signal (coax cable) or balanced video signal (one twisted pair). Interfaces include a Wiegand output
(for systems based on this interface) plus two serial interfaces (USB and RS-485) both allow for
programming and event logging. The programming menu and the setup menu are protected by
two passwords with different login levels (the engineer password that grants full access and the
system administrator password that is limited to some specific settings) while if you operate from a
PC an “Engineer’s Password” is requested to program the unit. A “Trade Code” function is available
(for periodic visitors) enabled by the specific input or by programmable time band and “Direct Call
Mode” for small installations (up to 10 apartments).
The memory capacity allows to store up to 998 users data, up to 2800 access codes, up to 2800
proximity keys and up to 4000 events. The front panel finish is brushed stainless steel while the
frame finishes are the standard offered in the 4000 Series.
4212RV
As Art. 4212V but using a keypad with 15 blue back lit buttons 3 of which are navigation buttons
used for the repertory name facility, 10 are numeric buttons (0..9) plus “ENTER” and “CLEAR” buttons. The tenants can be called by dialling the relevant apartment code or by searching the relevant
name using the repertory name function.
GENERAL CATALOGUE
9
4000 Series Vandal Resistant range
Modular System
Art. DIGITAL CALL PANELS FOR VX2200 DIGITAL SYSTEMS
(2 WIRE BUS AUDIO, 6 VIDEO)
FLUSH MOUNT
4212V/F
As Art. 4212V but flush mounting version with
flat panel (2mm plate protrusion, 9mm camera
protrusion). The plastic back box is the same used
in the Art. 4852.
4212RV/F
As Art. 4212RV but flush mounting version with flat panel (2mm plate protrusion, 9mm camera protrusion).
The plastic back box is the same used in the Art. 4852.
135
47
9
Standard
280
Art. 4212V/F
Art. 4212RV/F
45
Art. DIGITAL CALL PANELS FOR VX2200 DIGITAL SYSTEMS
(2 WIRE BUS AUDIO, 6 VIDEO)
SURFACE MOUNT
4212V/SA
As Art. 4212V but version with specific stainless
steel surface mounting box.
4212RV/SA As Art. 4212RV but version with specific stainless
steel surface mounting box.
127
30
9
Standard
277
Art. 4212V/SA
Art. 4212RV/SA
GENERAL CATALOGUE
85
4000 Series
Modular System
* Art. 4882/C
* Art. 4882
* Art. 4882/G
* Art. 4852
* Art. 4882
FRONT SUPPORT AND SURFACE MOUNTING UNIT AVAILABLE MATERIALS AND FINISHES
Front support and surface mounting units are available with the support frame in 3 different finishes:
- embossed metallized gun-metal grey (standard finish);
- sky chrome PVD** (chromium effect);
- high brass PVD** (gold chromium effect).
When ordering other than standard finish, add to the product code “/C” to
order the sky chrome finish or “/G” to order high brass finish.
* The product code is relevant to the module shown in the photo.
** The PVD technology employed in coating the support frames has no environmental impact and allows the
frames to be coated with a high performance metallic film, resulting in extreme surface hardness, high resistance
to corrosion, wear and tear, no UV degradation and protection from solvents and acids.
FRONT SUPPORT
The front support is available in 1, 2 and 3 module versions and includes:
- The flush back box.
- The module support frame is provided with a waterproof gasket and security screws for fixing to the flush back box.
- Spacers to connect the back boxes together when the outdoor station requires more than 3 modules.
135
135
120
135
45
61
400
61
280
143
160
Art. 4851
86
MODULES
4851
263
17
Art. 4852
FRONT SUPP.SIZE WxHxD (mm)
BACK BOX SIZE WxHxD (mm)
1
135x160x61
120x143x44
4852
2
135x280,2x61
120x263,2x44
4853
3
135x400,4x61
120x383,4x44
GENERAL CATALOGUE
383
143
17
Art. 61
17
Art. 4853
4000 Series
Modular System
SURFACE MOUNTING UNIT
The surface mounting units are available in 1, 2, 3, 4, 6 and 9 module versions which include:
- The surface box to fix to the wall with the screws provided.
- The module support frames are provided with waterproof gaskets and security screws. When surface mounting 4, 6 or 9 module versions, the support frames provided are 2 x two module, 2 x three module and 3 x
three module versions.
The only available finish for the back box is embossed metallized gun-metal grey.
44
135
44
135
135
400
44
280
320
200
80
160
80
80
17
80
17
Art. 4881
17
Art. 4882
Art. 4883
44
270
405
44
44
270
400
400
280
17
Art. 4884
Art. MODULES
4881
17
17
Art. 4886
Art. 4889
SIZE WxHxD (mm)
Art. MODULES
SIZE WxHxD (mm)
1
135x160x44
4884
4
270x280,2x44
4882
2
135x280,2x44
4886
6
270x400,4x44
4883
3
135x400,4x44
4889
9
405x400,4x44
ANTITAMPERING
An anti-tamper switch Art. 482 is available for the 4000 Series surface mounting boxes.
GENERAL CATALOGUE
87
Digital Systems
To compliment the extensive range
of modular systems (4000 and 8000)
Videx also manufacture a comprehensive range of digital systems, giving
the designer, installer and end user the
flexibility required. All digital systems
have been designed for ease of installation, reliability and quality. The three
distinct versions of digital systems will
cater for every eventuality.
VX2200
VX2200 has been designed to cover
most types of installation. A basic system will operate on 2 wires for audio
and 6 wires for video and can have
up to 10 door panels per bus and 998
intercom/videophones (This can be
a single level system with up to 998
apartments or a 2 level system with
up to 180 apartments per block were
the main entrance panel(s) is able to
call up to 998 apartments). The system
can be installed in many different ways
and can have optional line isolation
to protect the systems integrity in the
event of cable damage.
VX2300
VX2300 has been designed for small to
medium installations having a maximum of 100 intercom/videophones.
The system can have up to 8 door panels and operates on a true 2 wire Bus
which is not polarity conscious. System integrity is maintained through 4
way distribution boards.
88
GENERAL CATALOGUE
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
Kristallo Series
3000 Series
3
Art. KRA76
2
Art. KRA78
Art. 3171B
3
Art. 3172
Art. 3176
CO.LINE
5000 Series
3
2
6
Art. 380
Art. 2280
Art. 5178
Art. VR5178
3
PC CONCIERGE SOFTWARE Art. 2217
RS232
R
Art. 2210A
Main window
3
Call Pop-up
window
RS232
2
Art. 521B
Event Log window
2
Art. 4202
User Database window
GENERAL CATALOGUE
89
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
Kristallo Series
3000 - 3600 Series
6
Art. KRV76
Art. KRV78
Art. KRV778
Art. 3471
6
6
6
6
Art. 3678
Art. 316N
5000 Series
6000 Series
6
Art. SL5478N
Art. VR5478
Art. 6072
Art. 6272
Art. 6378
PC PROGRAMMER SOFTWARE Art. 2207
System Selection
window
Art. 2210V
Main window
6
Download/upload
access window
2
RS232
Art. 512B
2
Art. 893N1
90
GENERAL CATALOGUE
2
Art. 4202V
Main window
with users data
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
VX2200 DIGITAL SYSTEM
“2 WIRE BUS”
Videx VX2200 digital system is the most “versatile” system in the range, because it is flexible enough to cater for a
variety of installations: from 1 way systems to larger systems that include a maximum of 1000 apartments.
This system uses a two wire common bus for audio installations and 6 wires for audio/video installations. Outdoor
stations can be selected from the 4000 or 8000 Series: both series have traditional speaker units with an inbuilt
functional to digital interface (for installations up to 64 apartments) and digital panels (suitable for systems with
more than 64 apartments).
Speaker units with functional to digital interface allow to connect traditional call buttons to the digital system while
digital panels, although have the same size as two modules, can handle up to 1000calls (1000 apartments/users).
4000 Series digital panels are available for both audio and video versions, while 8000 Series panels can only require
an additional camera module for video systems.
Digital panels, which allow to have small size outdoor stations (2 modules for 4000 Series audio and audio/video
systems, and 2 or 3 modules for 8000 Series audio and audio/video systems), can also work as access control devices
(the latest panels of 4212 range, that includes also the RFID technology, allow for each apartment/user to record one
or more access code and/or one or more proximity key in order to open the door. This range of panels has also the
logging function on serial output) and include other functions such as speech board (a voice guidance helps you
through the calls progress) or messages on the display or the repertory name facility (“R” version digital panels allow
you to search for the name you wish to call through their special search buttons).
The programming of these digital panels can be done both through their keypad and through a PC (using a programming software and a cable).
Indoor units can be selected from a large range of intercoms and videophones for VX2200 digital system, including
the 900, 3000, 5000, 3600, 6000 and Kristallo Series.
Videx VX2200 digital system is continually expanding and updating, among the new units for this system you can
find the KRISTALLO Series with the latest Art.KRV778 which is a Hands Free videomonitor using 7” full colour active
matrix LCD display with OSD and capacitive touch sensitive buttons or the latest models Art.6072 and 6272 from the
low cost, easy to use, compact and minimalistic design 6000 Series.
Also, a complete range of accessories is available for the VX2200 digital system such as: digital concierge ( which
allows to handle all calls externally, alarms and the intercommunication among indoor stations), extension sounder
( that extends the area within the melody tone of the call can be heard), Bus relay ( to activate services related to an
alarm or a specific call), telephone interface (to answer the call through the phone) and the new block exchanger
Art. 2206N which allows to carry out installations up to 1000 users/ apartments with one entrance or with main and
secondary entrances (in this case you can connect up to 180 users to each secondary entrance/block , not exceeding
the total number of 1000 users), secondary entrances can work simultaneously as separate installations.
Among all the solutions that Videx VX2200 system offers, it is also possible to carry out low cost intercom systems
without digital concierges, up to 255 apartments, by using 3000 Series intercoms (Art. 3161B and 3162B).
If you use a 900 series unit you cannot install in the same system indoor units from other series, while units from
3000 Series (316X items excluded), 3600, 5000, 6000 and Kristallo Series can be mixed in the same system.
MAIN SPECIFICATIONS:
- Ease of installation.
- Ease of programming (through front panel keypad or PC).
- “2 wire” common bus for intercom systems, “6 wire” for videophone systems with centralized power supply.
- Excellent quality audio and video signals.
- Privacy of speech and lock release.
- Direct calling of up to 998 flats with intercoms/videophones (except 900 Series) and 2206N units (180 flats
each 2206N) or up to 255 flats only with special intercoms Art. 3161B and 3162B.
- Multi level facility.
- Multi entrance facility (up to 10 entrances for each level).
- All peripherals are intelligent and can be connected directly to the bus.
- Back up battery facility.
- Digital Front Panel with numerical keypad and display with the ability for all users to have their own unique
access code. The access code can have up to six digits and is blind to onlookers.
- Functional panel interface available.
- Digital concierge facility.
GENERAL CATALOGUE
91
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
MAIN COMPONENTS
Art. VX4202, 4202V, 4202R, 4202RV - Digital Front Panels
4000 Series modules are available in both audio and audio/video and are built into double 4000 Series modules and have
numeric keypads and 8 alpha buttons (VX4202, 4202V) or a numeric keypad with 3 “Repertory Names” navigation buttons
(VX4202R,4202RV), 2 x 16 character LCD display and speaker unit. Using the VX2207 programming kit which includes software
and a connection cable the digital front panels can be fully programmed using a PC.
All digital panels are able to store up to 1000 user’s data, so the same apartment can be associated with more users (i.e. a professional
user can be stored two times in the panel’s memory: once with the name of his company and once with his name personal). For each
panel version, the optional speech board can be requested: the visitor is assisted by vocal messages during call operations (available
languages English, Portuguese, Croatian - other languages available on request for 3 panels as minimun order).
These units will work with the 900, 3000, 3600, 5000, 6000 and Kristallo Series intercom and videophones and with the low cost
Art. 3161B/3162B intercoms.
4000 Series digital panels are available in stainless steel (/S) or anodized aluminium (/A).
Art. 4212V, 4212RV, 4212V/F, 4212RV/F, 4212V/SA, 4212RV/SA - Digital Front Panels
4000 Series Vandal resistant range (front plate in brushed stainless with 2mm thickness) digital call panel for Videx VX 2200
digital systems (2 wire BUS audio, 6 wire BUS video). This panel is compatible with the 4000 Series modular system and has the
size of two 4000 Series modules.
Complementing all digital door panels manufactured by Videx is the ability for all users to have their own unique access
code (each apartment can have more than one access code). The access code can have up to six digits and is blind to onlookers. Also,integrated into the panel is a proximity reader enabling allowing a number of proximity fobs to be stored and used
individually or in combination with the access code to enter the building. In addition to the speaker unit functions, the panel
includes a128 x 64 pixel graphical LCD display blue back lit (to provide visual and text messages in multiple languages guiding
a visitor through the panel operation) plus a keypad with 18 blue back lit buttons 6 of which are alpha buttons (A..F), 10 are
numeric buttons (0..9) plus “ENTER” and “CLEAR” buttons. The tenants can be called by dialling the relevant apartment code.
To complement the visual messages provided from the display, the panel has the speech board facility (optional chip installation) to supply audio messages concerning the system operation. The built-in camera is a colour CCD wide angle day/night
camera with IR illumination LED’s (the day/night camera provides the best quality of view in any light condition and the wide
angle camera provides a viewing angle of 170 degrees). The camera can be set to work with composite video signal (coax cable) or balanced video signal (one twisted pair). Interfaces include a Wiegand output (for systems based on this interface) plus
two serial interfaces (USB and RS-485) both allow for programming and event logging. The programming menu and the setup
menu are protected by two passwords with different login levels (the engineer password that grants full access and the system
administrator password that is limited to some specific settings) while if you operate from a PC an “Engineer’s Password” is
requested to program the unit. A “Trade Code” function is available (for periodic visitors) enabled by the specific input or by
programmable time band and “Direct Call Mode” for small installations (up to 10 apartments).
The memory capacity allows to store up to 998 users data, up to 2800 access codes, up to 2800 proximity keys and up to 4000
events. The front panel finish is brushed stainless steel while the frame finishes are the standard offered in the 4000 Series.
Art. VX4203-0,1,2 - Speaker unit module with functional/Digital Interface
This unit is built into a single 4000 Series module, it includes the speaker and interfaces to the digital bus. Up to 64 push buttons can
be added to the interface using the Art. 4842, 4843, 4844, 4845 etc (the 4203 is available with either 1 button, 2 buttons or no buttons).
Art. VX4283-0,1,1D - Speaker unit module with functional/Digital Interface and built-in camera
The 4283 unit is an intelligent front panel based on a “6 wire” BUS intercom system that enables the connection of traditional
push buttons. This unit is housed in a single 4000 Series module and incorporates the functional interface connections from
functional to digital bus, the speaker module with 0, 1 or 2 call buttons also includes a high quality CCD Camera and infrared illumination LED’s. In addition to conventional acoustic signals, the 4283 speaker unit gives visual indication relevant to the system
operation by the 4 LED’s on the front panel. For each version (0, 1 or 2 buttons) there are 2 models available with the following
camera options: colour Day/Night or colour Day/Night with Wide Angle camera.
In the first model the built-in camera has horizontal & vertical adjustment of 10 degrees while with the Wide Angle the camera
is fixed but the field of view is 170 degrees.
The camera can be set to work with composite video signal (coax cable) or balanced video signal (one twisted pair). Available in all
the 4000 Series finishes. This device enables the connection of up to 32 functional push buttons using standard 4000 Series extension
module panels Art. 4842, 4843, 4844, 4845 and relevant double button version 4842D, 4843D, 4844D and 4845D. The 4283 can work
with any intercom and videophone available for the VX2200 from 900, 3000, 3600, 5000, 6000 and Kristallo Series range.
To order the Wide Angle camera add “/wide” to the code.
Art. VR4KAM2W-0,1,2,3 - Speaker unit module with functional/Digital Interface vandal resistant line
The VR4KAM2W is a 4000 Series digital ‘two wire’ vandal resistant speaker module which has been specifically developed for the
Videx VX2200 (two wire audio and six wire video) bus systems. This module offers the same features as the VR4KAM with the
addition of being able to connect up to 23 individual buttons using the vandal resistant VR4KBM button expansion modules.
92
GENERAL CATALOGUE
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
Art. 8202, 8202R Digital Front Panels
Same features and operation as in the 4000 Series panels but only audio version (for video systems the panel must be combined
with a 8000 Series camera module). These units are built into a double 8000 Series module (stainless steel/S or aluminium/A) and
have numeric keypads and 8 alpha buttons (8202) or a numeric keypad with 3 “Repertory Names” navigation buttons (8202R), 2
x 16 character LCD display and speaker unit.
Art. 8203-0,1,2 - Speaker unit module with functional/Digital Interface
This unit is built into a single 8000 Series module, it includes the speaker and interfaces to the digital bus. Up to 64 push buttons
can be added to the interface using the Art. 8843, 8844, 8845 etc (The 8203 is available with either 1 button, 2 buttons or no
buttons).
Art. VX2204-1, Art. 2204N - 4 way (optional) Isolation Board
This unit isolates the telephones from the main bus preventing a single telephone from compromising the system. One PCB is
required for every four handsets.
Art. VX2206 - Digital BUS Exchanger
For use with two level systems enabling more than one speech path (One per internal block). For videophone systems is required the
VX2206/V.
Art. 2206N - Block exchanger for audio/video door entry systems.
The Art. 2206N has been developed from the Art. 2206A and 2206V (BUS exchange devices) to give greater system flexibility
in one and two level system design and permits far longer cable runs. The 2206N can be used to distribute the system BUS or
used where the installation is greater than 180 apartments. The 2206N allows multiple speech paths on two level systems or on
installations with a main digital entrance panel and a number of digital or functional secondary block or sub entrances with upto 998 apartments. This module can also be used on installations where the existing cable cross section is found to be too small.
Note: main door stations used with Art. 2206N must be digital panels (8202 or 4202 and related versions) with firmware release 5.0 or later.
Art. VX2210A-1/A - Digital Concierge Unit for intercom systems
The VX2210 allows the operator to handle and to transfer the calls from and to the users. Depending on the selected operating
mode (day-night-off ), it is possible to carry out different functions from the concierge. For videophone systems, it is necessary to
use VX2210-1/V (As VX2210-1/A with additional flat screen monitor). An RS232 input to a PC is also available.
Art. 2211
The Art.2211 is a digital intercom for VX2200 digital system (“2 Wire” BUS audio, “6 Wire” BUS video). The circuitry includes the
same components of the Art.3171B so there are the “door open” & “service” buttons, the electronic call tone (main and local) with
3 adjustable volume levels, the 8 way dip-switch bank to set the intercom address, the board with 6 connection terminals and
the VR1 trimmed to adjust the microphone volume.
Art.2211 allows to operate concierge functions that may be enough for a system having a little number of users.
Art. 2280-1
“2 wire” Bus INTERFACE
The Art. 2280-1 enables the connection of the VIDEX Telephone Interface (Art. 280N1) or the VIDEX PABX interface (Art. 275/2W)
or the VIDEX apartment station (Art. 500MM) onto the VX2200 system “2 wire” Bus. Please, see “Telephone Systems” in this catalogue.
Art. 3161B - Intercom
Low cost intelligent intercom with electronic call tone (3 level volume), “door open” and “service” push buttons. It has a reduced
number of features than the 3171B (see VX2200 section). Local bell input (requires an additional wire).
Art. 3171B, 3172, 3176 - Intercoms
Intelligent Intercom with electronic call tone (3 level volume), “door open” and “service” push buttons.
Programmable melody and number of rings. Plus “privacy ON-OFF” switch Art. 3172. Plus “timed privacy ON-OFF” push button,
“door open” LED and “privacy on” LED, Art. 3176.
Art. 5178 - Intercom
Intelligent voice switched hands free intercom with buttons to control “answer/end conversation”, “door open” (programmable
duration), “privacy on/off” (programmable duration) and “service” button. In addition there are 4 LED’s to indicate the status of
“answer/end conversation”, “door open/closed”, “privacy on/off” and auxiliary “service” status. Call tone and loudspeaker volume
controls are also incorporated on this model.
GENERAL CATALOGUE
93
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
Art. VR5178 - Intercom
Same features of Art. 5178 but vandal resistant version: the “service” button that is missing, is replaced by the “privacy” button
that works also as “service” button. Adjustments and programmable functions are the same but are carried out in a different way.
Vandal resistant version is for flush mount. This version is made from a brushed stainless steel plate, 2.5mm thickness, to which,
in the back side, is secured the intercom circuitry. The intercom includes the flush mounting box comprised of fixing screws.
Art. KRA78 - Intercom
Flush mount hands free audio intercom. All buttons use capacitive touch sensor technology, 4 of these buttons have multiple
direct functions such as “answer/end conversation/recall/simplex conversation”, “door open”, “privacy/call reject/programming
menu access” (programmable duration) and “service” button. 3 LED’s give visual indication of operations while the other 5 buttons allow navigation of the programming menu’s and the setting of volumes.
It is possible to program the melody (9 available), the number of rings (max 9) and the privacy service duration (max 20 hours).
Also includes a local bell function.
Available in black (add to the product code “/B”) or white (add to the product code “/W”) finishes.
Art. KRA76 - Intercom
As Art.KRA78 but surface mount version with telephone handset.
Art. 3471 - Videophone
Videophone, for coax and non coax video systems, using a 3.5” LCD TFT colour monitor, with “door open” and “camera recall”
push buttons plus 3 service buttons and an “ON” LED. Programmable melody and number of rings. Controls: 3 levels of call
tone volume (both main and local), contrast and brightness.
Art. 3476 - Videophone
As Art. 3471 but with 2 service push buttons plus electronic “ON-OFF” timed privacy push button, “DOOR OPEN” and“PRIVACY
ON” LED’s.
Art. 3676 - Videophone
Videophone using 3.5” full colour active matrix LCD monitor for VX2200 digital video door entry systems using composite (coax
cable) or balanced (twisted pair) video signal. Including 3 buttons “camera recall”, “door-open/concierge-call”, “privacy/service”
plus 3 LED’s* for visual indication of all functions. Adjustments & programmable options: call tone volume on 3 levels (low, medium, high), picture brightness and hue, call tone melody, number of rings, video mode, privacy duration and address.
Also includes a local bell function and extension sounder output.
The Art. 3676 is surface mount and requires the Art. 5980 connection board and wall mounting plate. Except for the service button, all
other connections are the same as the Art. 5478 or SL5478N 5000 Series videophones but doesn’t require a permanent 12V.
Art. 3678 - Videophone
“High End” Videophone (with hands free facility) using 3.5” full colour active matrix LCD OSD monitor for VX2200 digital video
door entry systems using composite (coax cable) or balanced (twisted pair) video signal. Including 3 buttons “door-open/concierge-call”, “answer/camera recall/’push to talk”, “privacy/call reject/service” plus 3 LED’s* for visual indication of all functions.
Adjustments & programmable options (through OSD menu): loudspeaker volume, call tone volume, picture contrast, brightness
and hue, privacy duration, call tone melody, number of rings. Address and video mode are programmable through 2 dip-switch
banks. Also includes a local bell function.
The Art. 3678 is surface mount and requires the Art. 5980 connection board and wall mounting plate. Except for the service button, all other connections are the same as the Art. 5478 or SL5478N 5000 Series videophones.
Art. SL5478N - Video monitor
Hands free video monitor using 3.5” full colour active matrix LCD monitor, with “door open/concierge call” , “answer/camera
recall”, “privacy on/off” buttons all with LED* indication and 3 additional service buttons.
Controls: loudspeaker volume, call tone volume, picture brightness and hue.
Programmable number of rings, melody, privacy duration and video mode.
Electronic call tone generated by the unit plus active low inputs for local bell and alarm.
Art. VR5478 - Video monitor
Same features of Art. 5478 but VANDAL RESISTANT version. Programming and adjustments are carried out through a contextual
OSD menu. Only for flush mount.
Art. 6072 - Videophone
Surface mount videophone incorporating a 2.4” Hi-Res full colour active matrix LCD monitor, with “camera recall”, “door open/
concierge call”, 2 “service” buttons plus 2 LED’s* one for generic use (door opening usually) and one to indicate privacy service
enabled. Programmable settings: video mode (coax or balanced), melody and number of rings.
Adjustments: call tone volume (2 levels plus privacy position), microphone volume, picture hue, contrast and brightness.
94
GENERAL CATALOGUE
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
Art. 6272 - Videophone
Surface mount videophone incorporating a 3.5” Hi-Res full colour active matrix LCD monitor, with “camera recall”, “door open/
concierge call”, 2 “service” buttons plus 2 LED’s* one for generic use (door opening usually) and one to indicate privacy service
enabled. Programmable settings: video mode (coax or balanced), melody and number of rings.
Adjustments: call tone volume (2 levels plus privacy position), microphone volume, picture hue, contrast and brightness.
Art. 6378 - Videophone
Surface mount hands free intelligent Videophone using 3.5” full colour active matrix LCD monitor for VX2300. Including 4
buttons “service”, “privacy/bus relay activation”, “door- open/intercommunicating call” and “camera recall” plus 3 LED’s* for visual
indication of all functions. Adjustments & programmable options: call tone volume on 3 levels (low, medium, high), picture hue,
brightness and contrast, call tone melody, number of rings, privacy duration and address. Also includes a local bell function.
Art. KRV78 - Hands free video monitor
Flush mount hands free video monitor using 3.5” full colour active matrix LCD display with OSD (On Screen Display) for video
door entry systems using composite (coax cable) or balanced (twisted pair) video signal. All buttons use capacitive touch sensor technology, 3 of these buttons have multiple direct functions such as “door-open/concierge-call”, “answer/camera recall/
simplex conversation” and “privacy/call reject/service/programming and adjustment menu access”).
3 LED’s give visual indication of operations while the other 5 buttons allow navigation of the programming menu’s.
Programmable options: loudspeaker volume, call tone volume, picture contrast, brightness and hue, privacy duration, call tone
melody, number of rings, address and video mode. Also includes a local bell function.
Available in black (add to the product code “/B”) or white (add to the product code “/W”) finishes.
Art. KRV76 - Videophone
As Art. KRV78 but surface mounting version with handset for conventional use in addition to the hands free mode.
Art. KRV778 - Hands free video monitor
Intelligent hands free video monitor using 7” TFT Hi Resolution colour monitor with OSD (On Screen Display) technology and 8
capacitive touch sensitive buttons for VX2200 digital system.
2 LED’s* give visual indication about door open and privacy service.
Recall and intercommunication call functions, privacy and secondary service, concierge call and alarm signal (if available), push
to talk speech mode and temperature sensor.
Programmable options: loudspeaker and call tone volume, picture contrast, brightness and hue, date and time, privacy and
secondary service time, temperature scale, call tone melody and number of rings, ID number, text and background colours.
* The operation of some LED’s and the functions described may require additional cabling
ACCESSORIES
Art. 2207 - PC interface cable and Programming Software
This kit enables the full programming of the Art. VX2202M, 2202MR, 2210-1, 4202, 4202V, 4202R, 4202RV, 8202, 8202R, 4302N,
4302NR, 4302NV, 4302NRV directly from a PC.
Art. 2217 - PC interface cable and Concierge Software
This kit is for digital concierge 2210-1 and enables a pc to execute all concierge functions plus additional functions.
GENERAL CATALOGUE
95
VX 2300
Digital System “Two wire” BUS video
Kristallo Series
3000 - 3600 Series
2
Art. KRV86
Art. KRV88
Art. KRV788
Art. 3481
2
Art. 3686
2
Art. 317N
2
2
5000 Series
6000 Series
2
Art. SL5488N
Art. 5188
Art. 6286
Art. 6286
PC PROGRAMMER SOFTWARE Art. 2207
System Selection
window
Art. 2321N
Main window
2
Download/upload
access window
RS232
Main window
with users data
2
Art. 4302NRV
96
GENERAL CATALOGUE
VX 2300
Digital System “Two wire” BUS video
VX2300 DIGITAL SYSTEM
Videx Vx2300 system is the latest digital system of the range which holds all the knowhow and expertise the company has gained in the field.
Thanks to the common bus, made of two non-polarized wires only, it is possible to carry out installations with one
or more entrances on the same floor, or with main and secondary entrances on different floors (up to a maximum
of 16 outdoor stations).
The outdoor stations specific for this system are those from the 4000 Series; this range includes both traditional
speaker units with inbuilt functional to digital (for installations up to 64 users) and digital panels (suitable for systems with more than 64 users).
Traditional speaker unit modules with functional to digital allow to connect traditional call buttons (max 64) to
the digital system, while digital panels, although they have the same size as two modules, can handle up to 800
apartements/1000 users.
Digital panels are available for both audio and video versions.
Digital panels , which allow to have small size outdoor stations, (2 modules for 4000 Series audio and audio/
video systems), can also work as access control devices, ( each apartment/user recorded in memory a unique a
code for “door open”), and other functions can give indications about the system working, such as speech board
(a voice guidance helps you about the operations you are making), or messages on the display, or the repertory
name facility (“R” version digital panels allow you to search for the name you whish to call through their special
research buttons).
The programming of these digital panels can be done both through their keypad and through a PC (using a programming software and a cable).
Indoor units can be selected from a large range of intercoms and videophones for VX2300 digital system, that is
3000, 5000 Series and even the brand new 3600 Series.
Videx Vx2300 digital system is always expanding and updating, among the new units for this system you can find
Art. 3686, a new colour videophone from the 3600 Series.
Also, a complete range of accessories are available for the VX2300 digital system such as: Bus relay (that works as
a service relay in order to obtain up to 8 additional services or as sounder extension in order to connect external
sounders for calls ), bus amplifier ( to extend the distance covered by the installation by amplifying the bus line),
entrances switch Art. 2301N ( to combine up to 4 entrances on the same floor, and up to 8 by using 2 units),
block exchanger (which allows to carry out installations with main and secondary entrances) and interface for
Art. 380 ( which allows to answer the calls coming from the outdoor station with a normal phone).
MAIN FEATURES:
- 2 wire none polarity conscious BUS
- Distance up to 50 meters using standard telephone cable and up to 200 meters using Videx supplied cable. (it is
meant as the maximum distance between the power supply and the furthest outdoor station or videophone).
- Multiple entrance systems with up to 16 audiovideo door panels among main and secondary entrances
(not exceeding a max number of 8 door panels on the same level).
- Digital or functional door panels.
- All digital door panels incorporate speech annunciation of call progress and error messages and the ability for all
users to have their own unique access code. The access code can have up to six digits and is blind to onlookers
(panels are programmable from PC or door panel).
- System size up to maximum 100 devices (intercom/videophone) for installations with main entrances only or
100 devices for each block for installations with main and secondary entrances (Max 8 block exchangers in
the same system for a max total of 800 devices).
- Up to 4 devices (intercom/videophone) in the same apartment (the maximum device amount allowed must
not be exceeded).
- Intercommunication allowed between devices within the same apartment or between devices in different
apartments.
- Local door bell facility.
- Active video isolation splitter.
- Bus relay module for extra services (up to 8) or to connect to extension sounder.
- Telephone interface.
- Block exchanger for installations with main and secondary entrances.
- Bus booster.
- Electric lock or other devices powered from the door panel.
GENERAL CATALOGUE
97
VX 2300
Digital System “Two wire” BUS video
MAIN COMPONENTS
Art. 4302NV, 4302NRV, 4302N,4302NR - Digital Panels
Digital panels for the VX2300 are built into the 4000 Series modular frames (standard size 2 modules). The panels, in addition to
the speaker unit, includes a 2 line x 16 character LCD display with back lighting, keypad illumination and have a 15 (panel with
repertory name facility) or 18 push button keypad depending on panel version. Video versions include CCD camera and are
complete with subject illumination infrared LED’s (white light).
There are 2 models available with the following camera options: colour Day/Night or colour Day/Night with Wide Angle camera.
In the first model the built-in camera has horizontal & vertical adjustment of 10 degrees while with the Wide Angle the camera is fixed
but the field of view is 170 degrees. The camera can be set to work with composite video signal (coax cable) or balanced video signal
(one twisted pair).
To order the Wide Angle camera add “/wide” to the code.
Both audio and video panels have an input for external camera: in video panels it is possible to choose the main camera (the
camera which sends the video signal while calling) the user can commute the picture to the other camera anyway. VX2300
digital door panels have speech annunciation of the calls progress and error messages to assist the visitor and incorporate a
“coded access” facility for all users. All panels have a trade code plus a number of additional facilities, the “R” version door panels
incorporate a name search facility.
All digital panels are able to store up to 1000 user’s data, so the same apartment can be associated with more users (i.e. a professional user can be stored two times in the panel’s memory: once with the name of his company and once with his name personal). For each panel version, the optional speech board can be requested: the visitor is assisted by vocal messages during call
operations (available languages English, Portuguese, Croatian - other languages available on request for 3 panels as minimun
order).
Front panel finishes are the same as for the standard 4000 Series modules: mirror stainless steel (standard), anodized aluminium
and high polished brass.
Art. 4303N-0,1,2 - Speaker Unit with functional to digital interface module.
The Art. 4303N speaker unit can be used in place of digital door panels. The Art. 4303N is built into a single 4000 Series module and
includes the digital interface allowing the connection of up to 64 individual push buttons using the standard 4000 Series button expansion modules (Art. 4842, 4843, 4844 or 4845). The Art. 4303N is available with 1 button, 2 button or no buttons. Front panel finishes are
as per 4000 Series modular.
Art. 4330N - Camera Module
The Art. 4330N is housed in a single 4000 Series module. The built-in camera is CCD type with infrared illumination LED.
Are available in 2 models depending on the type of camera used: colour Day/Night or colour Day/Night Wide Angle cameras. In the
first type the camera has an horizontal and vertical adjustment (10 degrees) while the Wide Angle camera type is fixed with a horizontal angle of 170 degrees.
The Art. 4330N has an external camera input that can be switched from a videophone connected to the system.
Front Panel finishes are as per 4000 Series modular.
Art. 317N - 4 way BUS distribution Box
The Art. 317N connects to the 2 wire BUS and allows 4 units (audio-intercoms or videophones) to be connected. One Art. 317N
required for every 4 units connected on the system.
Should a fault occur on an audio-intercom or videophone the Art. 317N will isolate all 4 units connected to it with no detrimental effect to the remainder of the system. Art. 317N is housed in a wall mounting plastic box 70 x 110 x 30mm.
Art. 318
Art. 318 is a 2 ways passive line bus distributor, it can be used in smaller systems where the distance between the outdoor station and the furthest monitor is no more than 70mt. It is housed in a 50X60X20 mm plastic box which is for surface mounting.
Art. 2301N
Art. 2301N is the replacement for the Art. 2301/4 and 2301/8 entrance exchange units. The Art. 2301N will control 4 entrances
(up to 8 entrances if 2 x Art. 2301N’s are used). Each entrance can have its own video signal level set to cater for varying distances, the unit is housed in a 9 module DIN A type box and can be surface or DIN rail mounted.
Art. 2321N - Power Supply
Power supply for smaller systems with 1 door panel and a maximum of 20 audio-intercoms or videophones. The unit is housed
in a 9 module DIN box which can be rail or wall mounted.
98
GENERAL CATALOGUE
VX 2300
Digital System “Two wire” BUS video
Art. 2321/P - Power Supply
Power supply for use on larger systems with multiple entrances with up to 100 audiointercoms or videophones. The unit is
housed in a 15 module DIN box which can be rail or wall mounted.
Art. 2322
The Art. 2322 connects to the BUS of the VX2300 system and provides a +12Vdc source @ 100ma, which can be used to power
ancillary devices without the need for additional power supplies eg: To power 4800 digital keypad or other ancillary devices.
Art. 2305 - Bus Relay / Extension Sounder
The Art. 2305 has two built in relays and can be connected directly to the 2 wire BUS.
The unit has two modes of operation BUS Relay for ancillary devices or as an Extension Sounder. When used as a BUS Relay, the two relays
are addressed individually from 1 to 8. To activate one of these relays a specified button on the audio-intercom or videophone must be
operated the same number of times to correspond to the address value (1…8) of the required relay. When the unit is to be used as an Extension Sounder the address must be configured with the same address as the audio-intercom or videophone, these relays will be activated
from an external call and can be used with an extension sounder such as the Art. 512E (PSU also required). The unit is housed in a 5 module
DIN box which can be rail or wall mounted.
Art. 2315
The Art. 2315 is a BUS booster device (requires a power supply) designed to amplify video / audio and data signals for use where
existing cable has been identified as under sized for the distance to be covered.
NB. This product is not designed for use on new installations where correct cable size should always be used.
Art. 2306
Art. 2306 is a block exchange unit, which is required when an installation has secondary entrances in addition to a main entrance into the complex. You can install up to 100 intercoms/videophones each block (max 8 blocks for a total amount of 800
devices). The unit is housed in a 9 module DIN A type box and can be surface or DIN bar mounted.
Art. 2380
Art. 2380 allows to connect Art. 380 and Art. 275/2W interfaces to VX2300 digital system. Thanks to these interfaces you can use a normal
telephone ( land line telephone or laptop ) as an intercom. The unit is housed in a 9 modules DIN A type plastic box , and it can be surface
or DIN bar mounted.
Art. 3181 - Intercom
An intelligent 2 wire intercom with “door open/intercommunicating call” button, “BUS Relay” button, “privacy ON-OFF” switch,
“door open” and “privacy on” LED. The unit also has a 3 level call tone volume switch. Programmable privacy duration and intercommunicating mode.
Art. 3183 - Intercom
Intelligent Intercom with “door open/intercommunicating call” push button (key), BUS relay (Art. 2305) activation button (dot),
plus call tone volume control (3 levels). Programmable intercommunication mode.
Art. 5188 - Intercom
Voice switched hands free intercom with buttons to control “answer/end conversation/recall/simplex conversation”, “door open/
intercommunicating call”, “privacy on/off” (programmable duration) and “BUS relay control” (Art. 2305) button.
In addition there are 4 LED’s to indicate the status of “answer/end conversation”, “door open/closed”, “privacy on/off” and programming status. Call tone and loudspeaker volume controls, through assigned buttons, are also incorporated on this model. In
addition to programming required from the VX2300 digital system (address, extension address and intercommunication mode)
it is possible to program the melody, the number of rings and the privacy service duration. Surface wall mount installation.
Art. 3481 - Videophone
Intelligent videophone using a 3.5” LCD TFT colour monitor, with “door open/intercommunicating call”, “camera recall”, “bus relay
control” and “privacy on-off” push buttons plus 1 service button (dry contact) and “door open” plus “privacy on” LED’s. Programmable privacy duration. Controls: 3 levels of call tone volume (both main and local), contrast and brightness.
GENERAL CATALOGUE
99
VX 2300
Digital System “Two wire” BUS video
Art. 3686 - Videophone
Videophone using 3.5” full colour active matrix LCD monitor for VX2300.
Including 3 buttons “camera recall”, “door-open/intercommunicating call”, “privacy/service” plus 3 LED’s for visual indication of
all functions. Adjustments & programmable options: call tone volume on 3 levels (low, medium, high), picture brightness and
hue, call tone melody, number of rings, privacy duration and address.
Also includes a local bell function.
The Art. 3686 is surface mount and requires the Art. 5980 connection board and wall mounting plate.
Art. SL5488N - Hands free video monitor
Hands free video monitor using 3.5” full colour active matrix LCD monitor, with “door open/concierge call” , “answer/camera
recall”, “privacy on/off” buttons all with LED* indication and 3 additional service buttons.
Controls: loudspeaker volume, call tone volume, picture brightness and hue. Programmable number of rings, melody, privacy
duration and video mode. Electronic call tone generated by the unit plus active low inputs for local bell and alarm.
Art. 6286 - Videophone
Surface mount videophone using 3.5” full colour active matrix LCD monitor for VX2300. Including 4 buttons “service”, “privacy/
bus relay activation”, “door- open/intercommunicating call” and “camera recall” plus 3 LED’s* for visual indication of all
functions. Adjustments & programmable options: call tone volume on 3 levels (low, medium, high), picture hue, brightness
and contrast, call tone melody, number of rings, privacy duration and address. Also includes a local bell function.
Art. 6388 - Hands free videophone
Surface mount hands free intelligent Videophone using 3.5” full colour active matrix LCD monitor for VX2300. Including 4 buttons
“service”, “privacy/bus relay activation”, “door- open/intercommunicating call” and “camera recall” plus 3 LED’s* for visual indication of
all functions. Adjustments & programmable options: call tone volume on 3 levels (low, medium, high), picture hue, brightness and
contrast, call tone melody, number of rings, privacy duration and address. Also includes a local bell function.
Art. KRV88 - Hands free video monitor
Flush mount intelligent Hands free video monitor for the VX2300 digital system using 3.5” OSD full colour active matrix LCD monitor,
with touch sensitive buttons for “door open / service”, “answer/camera recall”, “privacy/bus relay” plus 5 navigation menu buttons and
3 LED’s related to the videophone operation.
Additional features include a real time clock, a temperature sensor and a serial RS232 port for future integration with home
automation systems.
Art. KRV86 - Videophone
As Art. KRV88 but surface mounting version with handset for conventional use in addition to the hands free mode.
Art. KRV788 - Hands free video monitor
Intelligent handsfree video monitor using 7” TFT Hi Resolution colour monitor with OSD (On Screen Display) technology and 8
capacitive touch sensitive buttons for VX2300 digital system.
2 LED’s* give visual indication about door open and privacy service.
Recall and intercommunication call functions, privacy and secondary service, concierge call and alarm
signal (if available), push to talk speech mode and temperature sensor.
Programmable options: loudspeaker and call tone volume, picture contrast, brightness and hue, date
and time, privacy and secondary service time, temperature scale, call tone melody and number of
rings, ID number, text and background colours.
* The operation of some LED’s and the functions described may require additional cabling
ACCESSORIES
Art. 2207 - PC interface cable and Programming Software
This kit enables the full programming of the Art. VX2202M, 2202MR, 2210-1, 4202, 4202V, 4202R, 4202RV, 8202, 8202R, 4302N,
4302NR, 4302NV, 4302NRV directly from a PC.
100
GENERAL CATALOGUE
Telephone systems
GENERAL CATALOGUE
101
Telephone systems
Switchboard interfaces
Art. SWITCHBOARD INTERFACES
275
The Art. 275 is an electronic device (in A type DIN box 8 modules) to interfacing a standard analogue
PABX (telephone switchboard) to a 1 call button VIDEX Outdoor Station. The system must be connected
(by using 2 wire telephone cable) directly to an unused PABX extension port; It enables you to answer a
call from an outdoor station by using one or more telephones connected to a PABX (it depends on the
programming of the PABX used) and open the relevant door.
The Art. 275 can be used in any VIDEX audio/video door entry system (in VX2200 and VX2300 systems
are required additional interfaces).
275/10 The Art. 275-10 is a call expander board for the Art. 275. When this board it is used, it is possible to connect to the Art. 275 a door panel with up to 10 call buttons. Each button can call a single extension for a
maximum of 10.
275/2W As Art. 275 but specific version for VX2200 and VX2300 digital systems.
From PABX
"Extensionxx"
From PABX
"Extensionxx"
VIDEX
ART.275-10
3+1
ART.275
3
ART.275
3+1
2
2
ART.322
ART.322
Art. 322
Art. 322
SE
12VAC
2
SE
12VAC
2
5
3+1
4+5
2
1
Art.520M
Power Supply
Art.520M
Alimentatore
Power Supply
4
Art. 520M
102
GENERAL CATALOGUE
Alimentatore
4
Art. 520M
4
3
Telephone systems
Telephone interfaces
Art. TELEPHONE INTERFACES
380
The 380 (in A type DIN box 9 modules) telephone interface enables a conventional telephone to be connected to a Videx audio or video door entry system. Thanks to the Art. 380, the telephone can work as a
standard intercom (to answer calls coming from the outdoor station and open the door) and as a stand
ard telephone (to receive and make calls from/to company line). In addition to the previous features, the
Art. 380 allows activation from the telephone two additional relay outputs, allows diverting a door panel
call to a pre-programmed telephone number or to a second telephone number if the first is busy etc.
The telephone used can be tone or pulse dial, traditional or DECT cordless.
The Art. 380 can be used in any VIDEX audio/video door entry system (in VX2200 and VX2300 systems
are required additional interfaces).
230Vac
2
230Vac
2
CO.LINE
CO.LINE
ART.380
ART.380
2
3+1
VIDEX
VIDEX
2
3+1 3+1
3+3
3+1
SE
VIDEX
VIDEX
12VAC
2
3+1 3+1
SE
12VAC
2
5
3+5
2
1
Art.520M
Power Supply
Art.520M
Alimentatore
Power Supply
4
Art. 520M
4
3
Alimentatore
4
Art. 520M
GENERAL CATALOGUE
103
Access Control
104
GENERAL CATALOGUE
Access Control
VIDEX ACCESS CONTROL SYSTEMS
Access control systems allow access or egress
to all forms of premises, These include offices,
apartments, schools etc., where controlled secure access is required.
The security level required will determine the
type and operation of the system to be installed
Videx offer 3 modes of operation for all access
control products.
The systems fall into the following categories:
- Stand-alone devices.
- Stand alone devices with serial connection
to main control unit.
- Serial devices controlled from a remote
control unit.
Stand-alone devices only require a power supply and locking device, the control circuitry and
“door open” relays (one or more depending on
the model) are housed within the access control
module. The user provides either an access code,
proximity key fob or a fingerprint, if the data presented is correct, the relevant relay will be enabled and access gained.
Serial devices offer a higher level of security as
they provide an interface through which the
user operates the system, while the control circuitry, “door open” relays and power supplies are
housed with the control unit which would be sited in a secure area. The user provides either, an
access code, proximity key fob or finger print at
the serial device interface, which transmits the
data to the control unit, if the data is correct this
will enable the relevant relay and allow access to
be gained.
All Videx access control devices are programmable via a keyboard, on board switches or by PC
via RS232 or USB serial connection.
Videx offer a wide range of access control products
from a simple standalone codelock up to 4000 user
20 main doors and 99 internal door fob access system and a 1000 user 64 door networked systems
employing combinations of coded access, fob access and fingerprint readers.
All access control can be integrated with the Videx
range of audio and video door entry systems.
Stand-alone digital codelocks
106
Serial digital codelocks
111
Proximity key readers
113
Finger print readers
119
GENERAL CATALOGUE
105
Access Control
STAND-ALONE DIGITAL CODE-LOCKS
Videx digital codelocks are manufactured from the highest quality materials, this guarantees high reliability and offers a wide range of models at competitive price / performance. All versions offer ease of installation and a user
friendly “programming menu” this allows the user to store, by using a “discrete code”(up to 8 digits), one or more “access codes” and relay opening time and operating mode (the number of codes and relays depend on the code-lock
model). The relays can be programmed to operate for a specified time or to be latched. Depending on the codelock
version, they can have 1 or 2 input terminals to enable the relevant relay.
Stand-alone code-locks are available in a number of version: flush or surface mounting for 8000 Series and “4000 Series” modular systems (to combine with audio and video door entry systems) and in plastic version for internal use.
The different versions start from 1 relay with 1 access code to 3 relays with 3000 access codes. The relays are dry contact
with C, NC and NO terminals (except the third relay in 3 relay version where only C and NO terminals are available).
All codelocks have protection that temporary disables the keypad each time a wrong code is entered: the disable
time will increase each time two or more wrong codes are entered.
If higher security is required, VIDEX offer codelocks that use serial communication between the key pad and the
remote “control unit” which houses the relay outputs.
106
GENERAL CATALOGUE
Access Control
DIGITAL CODE-LOCKS UNIT COMPLETE WITH MOUNTING BOX
These are self-contained digital codelocks that require no additional accessories for there installation. These units
are robust and very reliable. They are available for flush and surface mounting with front plates in stainless steel
(add /S to the product code) or aluminium (add /A to the product code).
All codelocks include 2 relay outputs with C/NC/NO contacts, 2 relay command inputs and an illumination panel.
Depending on the version of codelock, the number of access codes available range from a minimum of 2 to a
maximum of 100.
Working Voltage:
12/24Vac/dc.
Working Temperature:
-10 +50°C.
Relay contacts:
24Vac/dc 3A
Art. DESCRIPTION
VX800NF Codelock unit, 2 code/2 relay outputs, flush mounting.
VX800NS Codelock unit, 2 code/2 relay output, surface mounting.
VX900NF As VX800NF but with 100 codes.
VX900NS As VX800NS but with 100 codes.
Art. VX 800NS/A
Art. VX 900NS/A
Art. VX 800NF/S
Art. VX 900NF/S
LOW COST CODELOCK UNITS
These low cost codelocks offer an effective solution employing the latest technology with high quality and low
cost. The installed codelocks do not require any additional parts or accessories as they are supplied complete, with
the surface or flush mounting box depending on the version.
The front plate is available in two different finishes: aluminium gold anodized (add “/G” to the product code when
ordering) or silver anodized (add “/A”).
All versions have 1 access code (add “/9” to the product code to order 9 code version) and are equipped with keypad illumination lamp, with a call button (marked by the symbol
) to operate an extension sounder Art. 512A
and equipped with 1 relay with C/NC/NO terminals and 1 relay command input.
Working Voltage:
12/24Vac/dc.
Working Temperature:
-10 +50°C.
Relay contacts:
24Vac/dc 3A
Art. DESCRIPTION
VX810N
Codelock unit, 1 code, flush mounting.
VX810NS Codelock unit, 1 code, surface mounting.
Art. VX 810N/G
Art. VX 810NS/A
GENERAL CATALOGUE
107
Access Control
LOW COST CODELOCK UNITS FOR INTERNAL USE
This range of codelocks provide an ideal solution where Access Control systems are for internal use (offices, laboratories etc.). The management circuitry is housed within the ABS codelock box and the keypad is of the tactile
membrane type. The units are available for flush (requires a standard 503 back box not provided) or surface mounting. The colours available are dark grey for the surface version. With dark grey or white for the flush version. Flush
versions can be ordered un-assembled to be painted (by the customer).
All versions are equipped with a relay having C/NC/NO terminals and two relay command inputs. Both relay command inputs operate the same relay, the first activates the relay as programmed (latching or timed) while the
second alternates the relay state (latch).
Working Voltage:
12Vac/dc
Working Temperature: -10 +50°C
Relay contacts:
24Vac/dc 3A
Art. DESCRIPTION
VX812
Codelock unit, 9 codes, 1 relay, surface mounting colour dark gray.
VX814/W* Codelock unit, 9 codes, 1 relay, flush mounting, colour white.
VX814/G*
Codelock unit, 9 codes, 1 relay, surface mounting, colour dark ray.
Art. VX812
Art. VX813
Art. VX814/G
Art. VX815/G
*Painting of different colours shall be made by the customer: in this case order the unassembled version of the article. For the installation is required a standard 503 flush mounting
box (not provided).
TWO ZONE LOW COST SELF CONTAINED ALARM SYSTEM
The two zone alarm is contained in the same size box as the low cost codelock units. With new firmware, the two
zone alarm provides a basic low cost alarm offering ease of installation. The units are available for flush (requires a
standard 503 back box not provided) or surface mounting.
Available colours are dark grey for surface versions and dark grey or white for flush versions. Flush version can be
ordered un-assembled to allow painting for colour co-ordination (by the customer). The unit contains 1 relay with
C/NC/NO contacts, 1 tamper switch and 1 “instant zone alarm input”, 1 “delayed zone alarm input” (Timed entry
and exit), 1 x 8 Ohms siren output. The unit employs a user friendly “Programming Menu” which allows the programming of up to 30 user defined access codes, duration of siren and relay activation from 1 to 99 minutes and
timed exit/entry from 1 to 99 seconds. The alarm is ideal for use in stand alone applications ie, apartments, garages,
sheds, stock rooms or as a caravan alarm system etc.
Working Voltage:
12Vac/dc
Working Temperature: -10 +50°C
Relay contacts:
24Vac/dc 3A
Art. DESCRIPTION
VX813
Two zone alarm system, 30 codes,1 relay, surface mounting colour dark grey.
VX815/W* Two zone alarm system, 30 codes,1 relay, flush mounting colour white.
VX815/G*
108
GENERAL CATALOGUE
Two zone alarm system, 30 codes,1 relay, flush mounting colour dark grey.
Access Control
CODE-LOCKS MODULES FOR 8000 SERIES MODULAR SYSTEM
These units have been designed to compliment the “Series 8000” audio and video modules. The units are available
in 2 or 3 relay versions, with 2 or 100 code options and with optional keypad illumination lamp. All versions have
2 command relay inputs. Front plates are available in stainless steel (suffix the product code with /S) or aluminium
(suffix the product code with /A).
Working Voltage:
12/24Vac/dc 1 VA
Working Temperature: -10 +50°C
Relay contacts:
24Vac/dc 3A
Art. DESCRIPTION
8800 Codelock module, 2 code/2 relay output.
8900 Codelock module, 100 code/2 relay out put.
Art. 8800
Art. 8900
CODELOCKS MODULES FOR 4000 SERIES MODULAR SYSTEM
These units have been designed to complement the 4000 Series audio and video modules.
Are available in 4 different models: 3 for the standard line and 1 for the vandal resistant line. The modules for the
standard line have the same look but can be identified by the number of built-in relays and managed access codes.
The Art. 4801, having a serial RS-485 interface, offers the facility to be connected to the remote control units
Art. VX1050 and Art.VX 1052. The programming of the modules can be carried out through the module keypad
or, for the Art. 4801, through a pc software (Art. 4829 CD programming software plus connection cable).
Finishes as provided for 4000 Series modular system.
Working Voltage:
12/24Vac/dc 1 VA.
Working Temperature: -10 +50°C
Relay contacts:
24Vac/dc 3A
Art. DESCRIPTION
4800
Codelock module 3 codes / 3 relays.
4801
Codelock module up to 3.000 codes / 2 relays (RS-485 facility).
4900
Codelock module 100 codes / 3 relays.
VR4KCLM As Art. 4800 but vandal resistant line.
120
105
Art. VR4KCLM
Art. 4800/A
Art. 4801/A
Art. 4900/A
GENERAL CATALOGUE
109
Access Control
STANDALONE CODELOCKS “SLIM SERIES”
The “Slim Series” codelocks are designed to be installed where space is limited.
The body of the codelock is manufactured from one piece die cast aluminium, which greatly improves the codelock resistence to vandalism and misuse, giving increased reliability.
All models are for surface mounting and are available in two different finishes: nickel (order adding “/N” to the
product code) or gold (order adding “/G”).
O an active low input
put “push
“pu to exit” and can be supplied at
The keypad has a dry contacts built-in relay (C, NC, NO),
12Vac/dc.
d.
9 codes can be stored by the codelock keypad.
Working voltage: 12Vac/dc
Working temperature: -10 +50°C
Relay contacts: 24Vac/dc 1A
Art. DESCRIPTION
VX1030/N Stand-alone codelock
9 codes/1 relay
surface mount, nichel finish.
VX1030/G Stand-alone codelock
9 codes/1 relay
surface mount, gold finish.
Art. VX
Art
rt. VX 1030/N
1030/N
A
Art. VX
1030/G
ACCESS CONTROL SYSTEMS USING SERIAL CODELOCKS
Serial codelocks offer a higher level of security against tampering than “stand-alone” codelocks.
The keypad is the input peripheral for the data which is processed by the remote sited control unit (normally installed in a secure area), to which the keypad is connected through a serial connection.
Greater security against tampering is achieved as the lock relays are housed within the remote sited control
equipment.
The serial codelock units are powered from the control unit which houses the relays and stored access codes.
SERIAL CODELOCKS “SLIM SERIES”
The “Slim Series” codelocks are designed to be installed where space is limited.
The body of the codelock is manufactured from one piece die cast aluminium, which greatly improves the codelocks resilience to vandalism and misuse, giving increased reliability.
All models are for surface mounting and are available in either a square or rounded shape, with two different
g “/G”).
finishes: nickel (order adding “/N” to the product code) or gold (order adding
th following Videx Central C
These codelock units must be connected to one off the
Control Units: VX1000B, VX1010-1
es or relay outputs are
e required.
or VX1010-2, depending on how many user codes
Working temperature: -10 +50°C.
Art. DESCRIPTION
our.
VX1020/N Square shape, nickel colour.
VX1020/G Square shape, gold colour.
Art. VX
Art
rt. VX 1020/N
10020/N
110
GENERAL CATALOGUE
1020/G
A
Art. VX
Access Control
LOW COST SERIAL CODELOCKS
Having the same appearance as the “stand-alone” version, these are available for flush or surface mounting, with
the front panels available in two different finishes: aluminium gold anodized (add “/G” to the product code when
ordering) or aluminium silver anodized (add “/A” to the product code).Working temperature -10 +50°C.
Art. DESCRIPTION
VX1011
Keypad module with serial connection compatible with the following Videx Control Units: VX1000,
VX1000B, VX1010-1 or VX1010-2.
VX1011S As above but surface mounting.
Art. VX 1011/G
Art. VX 1011S/A
SERIAL CODELOCK MODULES FOR 4000 SERIES MODULAR SYSTEM
These units have been designed to compliment the 4000 Series audio and video modules. The Art. 4801 can operate in stand-alone mode but having a serial RS- 485 interface, offers the facility to be connected to the remote
control units Art. VX1050 and Art. VX1052. Finishes as provided for 4000 Series modular system
Working Voltage:
12/24Vac/dc 1 VA
Working temperature: -10 +50°C.
Relay contacts:
24Vac/dc 3A
DESCRIPTION
4801
Codelock module up to 3000 codes / 2 relays (RS-485 facility).
105
120
Art. Art. 4801
GENERAL CATALOGUE
111
Access Control
CONTROL UNITS FOR SERIAL CODELOCKS
All serial codelock units require a remote VIDEX control unit.
Control Units are identified by memory capacity (number of access codes that can be stored), the number
of relay outputs (with C/NC/NO contacts) and the operating mode. The control unit is programmed via the
keypad to which it is connected. The programming allows for the storage of access codes and the setting of
the relay operating times.
Access to the programming menu is password (PIN) code protected (maximum 8 digits) and can be customized
by the end user.
Serial connection between units uses 3 standard wires with a maximum distance of 600mts.
Art. CONTROL UNIT FEATURES
VX1010-1 Control Unit with door open/additional service function, with 1 access code, 1 relay output with the
option to control up to 2 serial keypads in parallel using keypad types: VX1001, VX1011, VX1020
and VX1021.
Housed in a standard 5 module A type DIN box (87.50mm).
Working Voltage:
12/24Vac/dc 2VA max
Working temperature: -10 +50°C
VX1010-2 Control Unit with door open/additional service function, with 9 access codes and 2 relay outputs.
The unit will control up to 2 serial keypads in parallel, using keypad types: VX1001, VX1011, VX1020
and VX1021.
Housed in a standard 5 module A type DIN box (87.50mm).
Working Voltage:
12/24Vac/dc 2VA max
Working temperature: -10 +50°C
Art. VX 1010-2
ACCESS CONTROL SYSTEMS USING PROXIMITY KEY READERS
“VproX” control units are available in five different sizes, allowing greater flexibility in the design and implementation of access control systems. A system will include a control unit, one or more key reader, power supply and as
many proximity keys as required. VproX” access control systems can be used from 1 door 20 user installation up to
20 main doors and 99 apartment doors with 4000 users.
Art. PROXIMITY KEYS
All proximity keys use a 32 bit code (with over 4 billion combinations) and are available in two
different formats: card and tags.
VX955/C Proximity key built into a PVC card, badge size (ISO standard 85,6x54x0,76). colour: gloss white,
compatible for silk screen printing. 32 bit code and a reading distance up to 50mm (using Videx readers).
VX955/T Proximity key built into a plastic key-holder (fob), diameter 36mm and thickness 5mm. colour: grey,
with Videx logo. 32 bit code and reading distance up to 20mm (using Videx readers).
Art. VX955/C
112
GENERAL CATALOGUE
AArt. VX955/T
Access Control
PROXIMITY KEY READER UNITS
VIDEX produce a wide range of proximity key readers to meet all installation and market requirements. The range
includes: surface mounting readers in plastic or metal housings, flush mounting readers, reader modules for
8000 Series and “4000 Series” modular systems and reader modules for installation on third party products.
Art. DESCRIPTION
849Z Proximity key reader for VIDEX 32bit coded keys.
The circuitry is housed in a die-cast aluminium alloy enclosure (compact and robust) with a polycarbonate
window for the key reading area. The maximum reading distance is between 20 to 50mm depending on
the key type used. The unit gives visual (tri coloured LED in reader window) and audible signals (internal
buzzer) of operation. Connection from the reader to the “VproX” control unit requires a 5 wire cable for a
maximum distance of 200 meters.
The Art. 849Z is available in two different finishes: pearl nickel (to order add “/N” to the product code) or
dark grey (to order add “/G”) The key reader is supplied from the control unit and is provided with a hidden fixing plate for surface mounting and a 3mts 5 core cable.
Working temperature: -10 +50°C
Art. 849Z/G
Art. 849Z/N
Art. SURFACE MOUNTING READERS
849P The 849P is housed in an impact resistant ABS plastic housing and has the same features as the 849Z. The
units are available in two colours: white (to order add “/W” to the product code) or dark grey (add “/G”
to the product code).
Working temperature: -10 +50°C
Art. 849P/G
Art. 849P/W
GENERAL CATALOGUE
113
Access Control
Art. FLUSH MOUNTING READERS
849F* Proximity key reader having the same features as Art. 849 but using flush mounting support. The support
(made from impact resistant ABS plastic) is available in 2 different colours: white and dark grey (when ordering add suffix /W for white or /G for dark grey). The installation requires a standard 503 flush mounting
box (not provided).
Working temperature: -10 +50°C
*Painting of different colours shall be made by the customer: in this case order the unassembled version of the article.
Art. 849F
Art. PANEL MOUNTING UNIT
VP/PM Proximity key reader head for panel mounting (or other third party support mounting), with polycarbonate window (40x40mm), protection box (55x55mm) and 35cm connection cable. Same features and
operation of other models.
4 fixing holes as shown in the drawing.
Working temperature -10 +50°C
Art. VP/PM
Art. READERS FOR 8000SERIES MODULAR SYSTEMS
8849 Videx proximity reader built in to a “Series 8000” module. Having the same features as the above models.
This unit combines a polycarbonate reader window with stainless steel or aluminium frame (when ordering add a suffix “/S” for stainless steel or “/A” for aluminium).
Working temperature -10 +50°C
AArt. 8849
114
GENERAL CATALOGUE
Access Control
Art. READERS FOR 4000 SERIES MODULAR SYSTEM
4849
Videx proximity reader built in to a 4000 Series module. Having the same features as the above
models. This unit combines a polycarbonate reader window. Finishes as provided for 4000 Series
modular system.
Working temperature -10 +50°C
VR4KVPM As Art. 4849 but vandal resistant line
STAND ALONE READERS FOR 4000 SERIES MODULAR SYSTEM
The 4000 Series is continuously undergoing enhancements and improvement to current modules and introducing new modules to complement the range. Two new stand-alone proximity key reader modules have
been added to the range.
The appearance of these new modules is the same as the Art. 4849 but include a dry contact changeover relay.
The readers are available in two versions 100 and 1000 user. The 1000 user (Art. 4850/P) has an RS-232 and RS485 serial interface included and can be used standalone (Self contained) or as part of a network. Programming
of both units is carried out using the 4 buttons on the rear of the modules or additionally through a PC or the
network for the Art. 4850/P. Finishes as provided for 4000 Series modular system.
Working Voltage:
12/24Vac/dc 1 VA
Working temperature: -10 +50°C
Relay contacts:
24Vac/dc 3A
Art. READERS FOR 4000 SERIES MODULAR SYSTEM
4850
Stand-alone proximity key reader module with 1 relay, 100 users.
4850/P Stand-alone proximity key reader module with 1 relay, 1000 users RS232 for programming, RS-485 serial interfaces which allows connection
to remote control units Art. VX1050 and Art. VX1052.
120
105
Art. 4849/A
Art. 4850/A
Art. 4850/P/A
GENERAL CATALOGUE
115
Access Control
CONTROL UNITS FOR PROXIMITY KEY READERS
Videx proximity readers are managed by one of the “VproX” control units. The range offers various models from
a basic unit that controls a single access point, to the more sophisticated, that have multi-access control and advanced features of programming/management of “events and reports”. All devices operate autonomously, so they
do not need a fixed connection with a Personal Computer. Various system functions and programming features are
accessible by using the switches and keyboards of the control units, while the most advanced system (VproX-1000
and 4000) can be controlled “on line” by a PC using special Videx software “VP4000”. All control units in the range
include an internal key reader and the option to have up to 2 external reader units (in parallel) on each door. Relay
outputs have NC/NO contacts, 5Amps–24Vac/dc max.
Connection to the “VproX” reader unit requires a minimum of 5 core cable (for serial communication) with a maximum distance of 200mts.
Art. CONTROL UNIT CONTROL FEATURES
VproX-20
Control unit for 1 door and 20 proximity keys. Programming, deleting and testing of a single key
and 4 door opening time settings (from 2 to 10secs).
Available in a plastic box, standard 5 module A type DIN box (87.50mm).
Power required: 12Vac/dc 2VA max.
VproX-100 Control unit for 2 doors and 100 proximity keys. 2 digits display and 4 function push buttons to gain
access (by means of a “master code”) for the programming, deleting and testing of a single key and
to set the door opening time (from 1 to 99secs).
Available in a plastic box, standard 9 module A type DIN box (157.50mm).
Power required: 12Vac/dc 2VA max.
Art. VproX-100
Art. VproX-20
VproX-250 Control unit for 3 doors and 250 proximity keys. 4 digit display and 4x3 keypad to gain access (by
means of a “master code”) for the programming, deleting and testing of a single key, to set the door
opening time (from 1 to 99secs) and the “time band” access (keys working time). Alarm relay with
timed activation after 5 attempts of entering with a “not allowed” key. Real time /clock on board
(with backup battery) and parallel port for an “on line” printer to report each entry. 2 removable
“Socket Memory Eeprom” for the “main memory” and “back up memory” where all system data is
contained. Power required: 12Vdc 4VA max.
Art. VproX - 250
116
GENERAL CATALOGUE
Access Control
VproX-1000 Control unit for 4 main doors (Expanding up to 20), and up to 99 apartment doors (by adding the
VproX-1000A unit for each door that requires to be controlled) and 1000 proximity keys. 2 x 16
chars LCD display and 4 x 4 keypad to gain access (by use of a “master code”) for the programming,
deleting and testing of a single key, to set the door opening times (from 1 to 255secs) and the 4
“time bands” (keys working time). Internal memory for the “event report” (up to 512), and a serial
RS232 port for connection to a P.C. with special Videx software. Alarm relay with timed activation
after 5 attempts of entering a “not allowed” key. Real time /clock on board (with backup battery)
and 2 removable “Socket Memory Eeprom” for the “main memory” and “back up memory” where all
system data is contained. Power required: 12Vdc 4VA max.
Art. VproX - 1000/4000
VproX-4000 Includes all the functions of VproX-1000, plus the followings additional features:
- Memory capability up to 4000 keys
- Internal memory for the ‘Event Report’ now stores up to 2048 events
- ‘Direct copy’ function to copy the ‘Main’ memory module onto ‘Backup’ memory module
- Control of ‘VproX-4000/DM’ door monitoring device, to monitor the door status from the PC
- Fully compatible with the advanced PC software ‘VP4000’.
Art. VPROX SYSTEM EXPANSION DEVICES
VproX-1000A Remote control unit for “VproX” proximity reader compatible with “VproX-1000/4000” system. This
device allows for the further expansion to the 4 main doors included on the “VproX- 1000/4000”
unit up to 20 (by adding one unit for each door) or to control the secondary apartment doors up
to 100 (by adding one unit for each door). By using a minimum 3 core cable all the remote control
units are connected in parallel on a serial BUS to the “VproX-1000/4000” control unit.
Available in a plastic, standard 9 module A type DIN box (157.50mm) with 230Vac 20VA max
power supply with the facility to connect a 12V – 2A backup battery.
Art. VproX - 1000A
GENERAL CATALOGUE
117
Access Control
VproX-4000/DM Door monitoring unit compatible with the VproX-4000 system. This device enables the monitoring of doors for either being open or closed. Four doors can be monitored by each unit.
The information will be relayed to the VproX-4000 controller and from there on to the PC. The
PC can then monitor the length of time a door is open and if necessary activate an alarm. This
greatly improves the security level of the VproX-4000 system. It is possible to connect up to 5
door monitoring units in parallel (To control up to 20 doors max.) on the same serial BUS used
by VproX- 1000/A sub units (Three wire bus).
Available in a plastic, standard 5 module A type DIN box with 12Vdc 1VA max.
Art. VproX - 4000DM
Art. MANAGEMENT SOFTWARE FOR VPROX CONTROL UNITS
VP4000 VproX-1000/4000 Win Software - Special program for the Windows® environment to manage the
“VproX-1000” and the VproX- 4000 controller units via a PC. The program incorporates user friendly
menus with on line “help”. When a database is created it is possible to associate the “user name” to each
key stored in the memory and to have access to all configuration parameters. The software allows for
the deletion or addition of keys and operates many other useful functions. It is also possible to download from the “VproX system the “event report” memory and to list its contents by name, key number or
chronological date. If the PC program remains connected “on line”, the screen will show the data of the
last 5 entries with the photo ID of last user.
The program is supplied on CD-ROM with a RS232 cable.
When used with the VproX-4000, the software has the following additional features:
- Door monitoring when using the VproX-4000/DM module.
- Make a note of a particular key so that you can be informed when it is next used.
- Assign credits to keys so that when all credits are used the key is disabled.
A different number of credits can be assigned to different doors.
- Program keys that will only operate once or that will expiry after a certain date.
- Reset the time and date on the VproX-4000 CPU to match the PC time and date.
VP4000-VproX-1000/4000 Win Software
118
GENERAL CATALOGUE
Access Control
STAND ALONE FINGER PRINT READERS
To compliment the access control range of 4000 Series, Videx have introduced the BioAccess range of stand-alone
finger print reader modules.
All versions have 3 dry contact changeover relays, RS-232 serial interface for PC connection, RS-485 serial interface
for network connection to Videx remote control units Art. VX1050, Art. VX1052 and a WIEGAND interface for control units that support this standard.
Two types of finger print readers are available, thermal swipe and capacitive, both types are available in two versions with, 1000 or 3000 finger print memory.
All versions are programmable manually from the on board switches, by PC using programming kit Art. 4827 or
through the network.
The Art. 4823 with 3000 fingerprint memory has a real time clock with battery back-up and an event log of 12,800
which can be accessed using a PC to download.
Finishes as provided for 4000 Series modular system
Working Voltage:
12/24Vac/dc 1 VA
Working temperature: -10 +50°C
Relay contacts:
24Vac/dc 3A
Art. CONTROL UNIT CONTROL FEATURES
4821C Capacitive touch finger print reader with 3 relays, 1000 finger print memory.
4823C Capacitive touch finger print reader with 3 relays, 1000 finger print memory.
Art. 4821C/A
Art. 4823C/A
GENERAL CATALOGUE
119
Access Control
CONTROL UNITS FOR DEVICES ON RS-485 SERIAL BUS
All Videx access control modules with RS-485 serial connections (codelocks, proximity readers and finger print readers) can be connected to a network control unit VX1052 or remote relay unit VX1050.
The VX1050 control unit has 3 changeover relays with dry contacts and is used to replace the operation of the relays
housed within the access control device. The user information is stored in the codelock, proximity reader or finger
print reader device which is connected to the BUS, the device processes the access information provided by the user
and if accepted transmits the information to the VX1050 control unit which enables the relevant relay. 32 devices
(4801, 4850/P, 4821, 4823C and 4821C) can be connected to the VX1050 BUS to activate the same three relays.
The VX1052 is a 4 door control unit. 16 VX1052 units can be connected to the same RS485 BUS allowing control of
64 doors (1 master VX1052 with the remaining units operating as slaves units). The unit includes door monitoring as
standard and will store up to 3000 users with access privileges (authorized doors, time bands, expiry date and credits)
and contact details (name, telephone No, e-mail etc.). The user information (except the contact information) is stored
in all the VX1052 control units, the codelock, proximity reader or finger print reader device which is linked to the
BUS through the VX1052, processes the access ID information provided by the user and transmits the information to
the VX1052 control unit where the user ID is stored, if accepted the relevant relay will be enabled. 64 devices (4801,
4850/P, 4823C and 4821C) can be connected to the VX1052 BUS. The 1052 also includes door monitoring and push
to exit button inputs for all doors.
A software kit Art. 1058 (software plus RS-232 cable) is available to program the VX1052 using a PC via RS-232 or USB
(cable not supplied) serial connection and allow real time access time monitoring.
Art. DESCRIPTION
VX1050 Control unit for Art. 4801, 4850/P, 4823C and 4821C, complete with 3 (24V ac/dc 3A max) dry contact
changeover relays with 3 active low inputs for direct relay control, RS-232 and RS-485 serial interfaces.
Power Supply:
12/24V ac/dc
Power consumption: 100mA
Working temperature: -10 to + 50°C
VX1052 Control unit for Art. 4801, 4850/P, 4823C and 4821C, complete with 4 (24V ac/dc 3A max) dry contact
changeover relays with 4 active low inputs for direct relay control, 4 door monitoring inputs, 3000 user
memory, 7000 event log memory, RS-232, RS-485 and USB serial interfaces.
Power Supply:
12/24V ac/dc
Power consumption:
100mA
Working temperature: -10 to + 50°C
Door 1
Door 2
Door 3
Door 4
Door 5
120
GENERAL CATALOGUE
Door 7
Door 8
DM 1
DM 5
USB
DM 2
DM 6
RS-232
DM 3
VX1052 Control
board ID 1
VX1052 Control
board ID 2
DM 4
RS-485
Art. 1050
Door 6
Art. 1052
DM 7
DM 8
Access Control
RS-485 BUS CONTROL UNITS PC PROGRAMMING SOFTWARE
Two versions of RS-485 software are available.
The first provided with kits Art. 4827 and Art. 1057 allows programming of the Art. 4821, 4823 and 4823C finger
print readers when directly connected to the PC using Art. 4827 or when linked to the BUS of the VX1050 using
Art. 1057. The software also provides a log function when connected to the Art. 4823 or through VX1050.
The second version provided with kit Art. 1058 allows the programming of control unit VX1052 and gives real time
monitoring of all activities when connected to a PC.
Art. DESCRIPTION
4827 RS-232 connection cable with Windows® programming software for Art. 4821C and 4823C. This software
allows data to be stored in a PC file and in the memory of the finger print reader module. The name of
each user can be stored on the PC and the same information as a numeric ID in the reader memory. One
or more finger prints can be stored for each user and each finger print can be assigned to one of the 3 on
board relays, each relay can be programmed individually with its own operating time. When the software
(Art. 4827) is used with reader Art. 4823C, events log reading is available. The software kit can also be
used with Art. 4828C (see accessories section) desk mount finger print reader.
1057 As Art. 4827 with a PC / RS-232 connection cable for use with VX1050 control unit. The software allows for
all the above functions of the Art. 4827, when the finger print readers are linked to the RS-485 BUS of the
VX1050 control unit.
1058 PC / RS-232 connection cable with Windows® programming software for use with VX1052 control unit.
The software allows data to be stored in a PC file and in the memory of the VX1052.
The software provides for the storing of up to 3000 users. Each user can have the following:- a user ID setting for each user, the users name, authorisation expiry date (if enabled), credits (if enabled), time zones,
assignments to which doors can be accessed and additional information including photo ID, telephone
numbers and e-mail address. The software also allows for the setting of time zones, door status monitoring (real time), event log of the last 7000 events, the setting of the individual opening time for each door
connected to the system and the number of credits assigned to an individual or group of users.
GENERAL CATALOGUE
121
Access Control
Art. 1058
Art. 4827
Art. 1057
122
GENERAL CATALOGUE
Accessories
The range of accessories includes optional
components and equipment to assemble an audio or video entry systems.
Audio-video door entry system accessories
power supplies and transformers
124
video distributors
125
entrances switches and control units
125
enslavement relays
126
additional speakers
126
modulated tone generators
126
external ccd cameras
126
video signal converters
127
others
127
Access control accessori
power supplies
128
db9 socket eprom memories
128
db9 socket eprom memories programmer
128
pc-keystore interface module
128
mini parallel printer
128
for finger print readers
128
GENERAL CATALOGUE
123
Accessories
Art. POWER SUPPLIES AND TRANSFORMERS
321
Transformer 230Vac input, 12Vac 1.3A output. With internal PTC protection; 15VA max. In a standard 3
modules A type DIN box (52.5 mm). For installation with outdoor station composed of 2 modules max.
322
Transformer as above but 18VA max.
AMR2-12 Power Supply 230 Vac input, 12÷14Vdc 2A output. In a standard 2 modules A type DIN box (35mm).
520M
Power Supply 230 Vac input, 8 Vdc and 12Vdc 250mA max outputs and 13 Vac 18VA output. In a
standard 8 modules A type DIN box (140 mm).
520MR
As Art. 520M with a built in enslavement releay with dry contacts.
520J
Power Supply as Art. 520 but with electronic impedence fitted for \two way intercom systems using
Art. 524, 526, 926 or 3101 phones.
520V
Regulated power supply with mains voltage 230Vac 50/60Hz and outputs 12Vdc, 18Vdc and 13Vac.
521B
Power Supply unit for intercom systems with backup battery facility and ON/OFF control; Input
230Vac, Output 13.5Vdc 0.8A continuous (1A pulsed) and 13.5Vac 1.6A (pulsed). In a standard 9 modules A type DIN box (157.50 mm).
522
Transformer 230Vac input, 13 Vac 1.6A output. In a standard 5 modules A type DIN box (87.5 mm).
Art. 521B
850
Transformer 230Vac input, 13Vac 13VA and 24Vac 24VA outputs.
It can supply up to two videophones in parallel.
In a standard 5 modules A type DIN box (87.50 mm).
850K
Transformer 230-127Vac inputs, 24Vac 24VA output. Used for videokits.
In a standard 5 modules A type DIN box (87.50 mm).
Art. 850
850KMV Transformer As above plus 12Vdc 0,2A output for memory board powering.
Is used on kits that include videophones with memory board.
893N1
124
GENERAL CATALOGUE
Power Supply 230 Vac input, two 20Vdc 0,8A output (“+” and “+D” terminals). Both outputs are enabled
by signals on command terminals “+C” or “-C”. The Art. 893N1 is used as video system power supply on
VIDEX digital systems (on which, in case of more entrances installation, is normally used the “+D” insulated
output) while on VIDEX traditional video entry system it is normally used as additional power supply.
In a standard 9 modules A type DIN box (157.5 mm).
Accessories
Art. VIDEO DISTRIBUTORS
891
Active Video Distributor, for coax systems, to amplify the video signal for use on systems with several
risers. Video gain control, 1 input, 4 outputs. In a standard 5 modules A type DIN box (87.50 mm).
894
Video Distribution Box for systems using coax cable. Powered by the videophone (+12V) it has 1 input, 1
through output and 4 outputs on 75 Ohms. In a plastic case 110 x 70 x 30 mm.
894N
As Art. 894 but small form factor and with built in jumpers to adjust video line impedance (is not required
the connection of external resistors). It is housed in a 50x60x20mm plastic box for surface mounting.
316
4 Way video distributor for systems with balanced video signal (“4+1”). In white plastic ABS box
11x70x30mm surface mount.
316N
As Art. 316 but small form factor without terminals to connect “+” (plus) and “-“ (minus) from videophones (is required an external connection of these terminals). It is housed in a 50X60X20 mm plastic
box which is for surface mounting.
317N
Video Distribution Box specific for VX2300 digital system (4 output with gain adjust).
318
2 ways passive line bus distributor for VX2300 system, it can be used in smaller systems where the
distance between the outdoor station and the furthest monitor is not over 70 mt. It is housed in a
50X60X20 mm plastic box which is for surface mounting.
Art. 893N1
Art. Art. 892
Art. 890N
ENTRANCES SWITCHES AND CONTROL UNITS
502N Two entrance “Switching Relay” signal generator. One required per entrance for intercom systems of three
entrances or more. It enables automatic switching of the speech lines and other services to the outside
station where the call has been placed. It is not required on audio door entry systems that use the
speaker units 4838 series. In a standard 8N modules A type DIN box (140 mm).
892
Two entrances switching relay for Video-intercom systems. One required per entrance for systems of
three entrances or more.
It is not required on video door entry systems that use the speaker units 4838 series.
In a standard 9 modules A type DIN box (157.50 mm).
890N Control Unit for videophone systems using coax cable. This unit together with power transformer Art. 850
feeds all circuits, selects the calls, assures the audio-video privacy to n. ... users. It incorporates a timer for
the video and speech time with auto doubling when a call is answered.
It is not required on video door entry systems that use the speaker units 4838 series.
In a standard 9 modules A type DIN box (157.50 mm).
GENERAL CATALOGUE
125
Accessories
Art. ENSLAVEMENT RELAYS
506N
Enslavement Relay (230Vac 5A max) enables the control of stair lights or other
power peripheral. In a standard 5 modules A type Dim Box (87.50 mm).
506T
Enslavement Relay as above but timed 2 - 100Sec.
512DR Extension Relay for VX2200 powered by the “2 Wire BUS”. Relay contact 1A
125Vac Max. In white ABS plastic box 110x70x30 mm.
Art. 506N
Art. ADDITIONAL SPEAKERS
512A
Additional speaker 45 Ohms 0.5W built into an ABS plastic case. It can be used with positive signal (generated by Art. 507N- 509N-510N) or negative signal generated by Art. 835M-0/..-1..- 2/..
In white ABS plastic box 110x70x30 mm.
512E
Extension Sounder as above but incorporating a modulated tone generator. Powered by 10/15V AC can
also be used in parallel with a standard 12V AC buzzer. In white ABS plastic box 110x70x30 mm.
512D
Extension Sounder for digital system VX2200. Is connected directly to the “2 Wire Bus”.
In white ABS plastic box 110x70x30 mm.
Art. 512A
Art. 512E
Art. 512D
Art. 510N
126
Art. MODULATED TONE GENERATORS
507
Modulated Tone Generator in a standard 5 modules A type DIN box (87.5 mm).
3807
Modulated Tone Generator specific for “1+1” audio entry systems and “4+1” video entry systems. In a
standard 3 modules A type DIN box (52,5 mm).
509N
Speech Cut Off Device + tone generator for use on 4+ 1 systems with privacy of speech and lock release (one required per system). It enables speech and operation of lock to be carried out only from the
last telephone called. In a standard 5 modules A type DIN box (87,5 mm).
510N
Switching relay plus modulated tone generator for intercommunicating systems using 928 or 3117
telephones. It allows a private conversation between extensions and outdoor station. It also incorporates a relay to operate the lock. In a standard 5 modules A type DIN box (87,5 mm).
Art. EXTERNAL CCD CAMERAS
989
External colour CCD Camera complete with white light illumination LED’s, weather-proof housing and
mounting bracket. Power supply 12 Vdc, coax video signal output.
GENERAL CATALOGUE
Accessories
Art. VIDEO SIGNAL CONVERTERS
401
Converter from non coax video signal (V1,V2) to coax video signal. In a ABS white plastic case 110x70x30 mm.
401-1
Converter from coax video signal to non coax video signal (V1,V2). In a ABS white plastic case 110x70x30 mm.
Art. OTHERS
512R
Extra Buzzer 12 V AC. In a plastic case 110x70x30 mm.
8834
Diode Module for 1+1 audio or 4+1 video systems, with 5 diodes for 5 users to be used with 8000 Series panels.
4834
Diode Module for 1+1 audio or 4+1 video systems, with 5 diodes for 5 users to be used with 4000 Series panels.
RZ102
Buzzer unboxed.
701T
Digital time clock complete with automatic BST/GMT correction, six fully programmable on/off times,
trade button input and 3A relay output. Operates from either 12Vac or dc.
In white ABS plastic box 110x70x30 mm.
VX480
The Art. 480 is a data converter from serial RS-232 or RS-485 to
10/100 Ethernet interface using TCP/IP protocol and vice versa.
This unit can be used with any Videx or non Videx products that
use RS- 232, RS485 or Ethernet interface and is housed in a white
ABS plastic case 110 x 70 x 30mm.
VX481
USB to serial RS-232 or RS-485 converter and viceversa.
It is housed in a white ABS plastic case 50 x 60 x 20 mm.
Art. VX480
Examples of Art. VX480 use
RS-232
RS-232
RS-232
Ethernet cross
cable
VX 480
Ethernet cross
cable
VX 480
VX 480
RS-232
RS-232
VX 480
RS-232
VX 480
Router
VX 480
Router
RS-232
Router
VX 480
GENERAL CATALOGUE
127
Accessories
Art. POWER SUPPLIES
321
230/13Vac 15VA transformer, with internal PTC overload protection.
PSU110
Power Supply 13V DC 1Amp, battery backup facility (12V-2A). Fuse for overload protection.
Rack version unboxed, dimension: 175x65x60mm.
Art. DB9 SOCKET EPROM MEMORIES
416
“Socket Eeprom Memory”, 16Kbyte for “VproX-250” system. Plastic socket standard DB9, grey colour.
417
“Socket Eeprom Memory”, 64Kbyte for “VproX-1000” system.
Plastic socket standard DB9, grey colour.
418
“Socket Eeprom Memory”, 256Kbyte for “VproX-4000” system.
Plastic socket standard DB9, grey colour.
Art. DB9 SOCKET EPROM MEMORIES PROGRAMMER
420
“Socket Eeprom Memory” programmer unit to manage the copy/erase of the data present in the
“VproX” access control. The device has 2 connectors where the 2 “Socket Eeprom Memory ” (source
and target) must be plugged in order to copy or erase the “VproX” system data. The device is available
in a plastic box (110x70x30mm) and power required is 8÷15Vdc or 9 volt battery.
Art. PC-KEYSTORE INTERFACE MODULE
430N
“PC-Keystore Interface Module” to manage the “VproX” systems data directly from the PC, by using
a simple electronic device (9V battery powered or 8÷15Vdc power supply). The interface uses the
2“Socket Eeprom Memory” of the “VproX” system thathave to be plugged into the 2 connectors on
the device. Through the special program “VP4000” (provided on CD-ROM) and RS232 cable (provided)
it is possible to manage all data of “VproX” system. At the end, the 2 “Socket Eeprom Memory” must
be reconnected to the VproX” system.
The device is available in a plastic box (150x70x40).
Art. MINI PARALLEL PRINTER
450
Unboxed 24 column mini printer plus winder unit, rack mounting.
,
p max.
Parallel interface (compatible with “VproX” system), power required: 5V DC 1,5Amp.
Art. ACCESSORIES FOR FINGERPRINT READERS
4828C
Desk mounted capacitive finger print reader housed in
a white ABS plastic case 110 x 70 x 30mm.
Normally used in combination with PC software for registration of
finger prints to be uploaded to the reader.
Art. 4828C
4828C
128
GENERAL CATALOGUE
Certifications
From the end of 2005
VIDEX has achieved the
ISO 9001 System Certification
GENERAL CATALOGUE
129
Although every effort has been made to provide accurate information in this catalogue may have technical or typographical errors.
Videx reserves the right to make changes at any time and without notice, corrections and improvements to such information.
Some of the pictures shown on the monitor’s screens are simulated so they might be different from real pictures.
130
GENERAL CATALOGUE
VIDEX Electronics S.p.A.
Via del Lavoro, 1 - 63846 Monte Giberto (FM) Italy
Tel: (+39) 0734 631669 - Fax: (+39) 0734 632475
www.videx.it - [email protected]
www.facebook.com/videx.electronics
www.videx.it
68009970 - 04/2014
Main UK office:
VIDEX SECURITY LTD
1 Osprey Trinity Park
Trinity Way
LONDON E4 8TD
Phone: (+44) 0870 300 1240
Fax: (+44) 020 8523 5825
www.videx-security.com
[email protected]
Northern UK office:
VIDEX SECURITY LTD
Unit 4-7
Chillingham Industrial Estate
Chapman Street
NEWCASTLE UPON TYNE - NE6 2XX
Tech Line: (+44) 0191 224 3174
Phone: (+44) 0870 300 1240
Fax: (+44) 0191 224 1559
Greece office:
VIDEX HELLAS Electronics
48 Filolaou Str.
11633 ATHENS
Phone: (+30) 210 7521028
(+30) 210 7521998
Fax: (+30) 210 7560712
www.videx.gr
[email protected]
Danish office:
VIDEX DANMARK
Hammershusgade 15
DK-2100 COPENHAGEN
Phone: (+45) 39 29 80 00
Fax: (+45) 39 27 77 75
www.videx.dk
[email protected]
Benelux office:
VIDEX BENELUX
E3 Iaan, 93
B-9800 DEINZE
Phone: (+32) 9 380 40 20
Fax: (+32) 9 380 40 25
www.videxbenelux.be
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement