four port active optical star coupler dt4000 series

four port active optical star coupler dt4000 series
DT4000 SERIES
FOUR PORT ACTIVE OPTICAL STAR COUPLER
PRODUCT SPECIFICATION
FEATURES
• Bi-directional Distribution of Optical Signals
• System can be Expanded up to 28 Optical Ports
• Star Transmission Architecture
• No In-field Electrical or Optical Adjustments Required
• Power and Optical Port Status LED Indicators
• Automatic Resettable Solid-State Current Limiters
DESCRIPTION
OP
• NTCIP Compatible
The IFS DT4000 series active optical star coupler provides
bi-directional distribution of an optical signal to three optical ports.
The system can be expanded up to 28 optical ports by utilizing the
built-in expander connection on the modules. The D1010 and D2100
series transceivers are fully compatible with this module when used as
RS-232/422 input/output devices. Models within this series are
available for use with multimode or singlemode optical fiber. Plugand-play design ensures ease of installation requiring no electrical or
optical adjustments for either a single unit or when expanding the
system. Each module incorporates power and transmit/receive status
indicating LED’s for each optical port for monitoring proper system
operation. The modules are available as stand-alone versions only.
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
• Distances up to 26 Miles (42 km)
Available at:
• Comprehensive Lifetime Warranty
APPLICATION EXAMPLES
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Traffic Signal Control Equipment
www.
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
ORDERING INFORMATION
DESCRIPTION
FIBERS
REQUIRED
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
DT4010
4 port active optical star (850nm)
4 In/4 Out
17 dB
3 miles (4.5 km)
DT4020
4 port active optical star (1310nm)
4 In/4 Out
13 dB
8 miles (13 km)
SINGLEMODE DT4025
9/125µm
4 port active optical star (1310 nm)
4 In/4 Out
14 dB
26 miles (42 km)
PART
NUMBER
MULTIMODE
62.5/125µm**
ACCESSORIES♦
OPTIONS
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected] ■ For an office near you go to: www.ifs.com
With Offices in Asia Pacific ■ Australia ■ Europe ■ Latin America
303
DT4000 SERIES
FOUR PORT ACTIVE OPTICAL STAR COUPLER
TECHNICAL SPECIFICATION
SPECIFICATIONS
ELECTRICAL & MECHANICAL
DATA
Power:
Surface Mount:
Rack:
Current Protection:
Data Interface:
Data Rate:
Bit Error Rate:
RS232, RS422
DC-100 kbps (NRZ)
< 1 in 10 -9
Circuit Board:
Size (in./ cm.) (LxWxH):
Shipping Weight:
WAVELENGTH
DT4010:
DT4020:
DT4025:
850 nm, Multimode
1310 nm, Multimode or Singlemode
1310 nm, Multimode or Singlemode
NUMBER OF FIBERS
4 In/4 Out
ENVIRONMENTAL
MTBF:
Operating Mode:
Operating Temp:
Storage Temp:
Relative Humidity:
CONNECTORS
Optical:
Data and Power:
+12 VDC @ 250 mA
From Rack
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
9.0 x 6.0 x 1.0 in., 23.9 x 15.2 x 2.5 cm.
< 2 lbs./0.9 kg
ST
Terminal Plug with screw clamps
>100,000 hours
Simplex or Full Duplex
-40° to 74° C
-40° to 85° C
0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
AGENCY COMPLIANCE
Federal Supply Schedule
MADE IN THE USA
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
Multimode
62.5/125µm**
850 nm
Singlemode
9/125µm
MODEL
TRANSMITTER
SENSITIVITY
OUTPUT PWR
DT4010
25 µw
(-16 dBm)
DT4020
20 µw
(-17 dBm)
DT4025
100 µw
(-10 dBm)
OPTICAL
PWR BUDGET
1 µw
(-30 dBm)
MAX.
DISTANCE*
14 dB
3 miles (4.5 km)
13 dB
8 miles (13 km)
14 dB
26 miles (42 km)
1310 nm
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
D1010
Host
ifs
D1010
International
Fiber
Systems
Incorporated
203.426.1180
Remote
RS-232
or
RS-422
ifs
Fiber
Systems
Incorporated
ifs
203.426.1180
International
Fiber
Systems
Incorporated
ifs
International
Fiber
Systems
Incorporated
203.426.1180
D1010
ifs
D1010
DT4010
Expander Port to DT 4000
RS-232
or
RS-422
Remote
Remote
International
203.426.1180
2 Fibers
62.5/125µm MM
up to 3 miles
(4.5 km)
Expander Port to DT 4000
International
Fiber
Systems
Incorporated
203.426.1180
RS-232
or
RS-422
RS-232
or
RS-422
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
304
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement