Product information LiveLink Sensor IR Quattro HD TOC

Product information LiveLink Sensor IR Quattro HD
TOC: 6565500
System specification
TRILUX LiveLink is the light management system for
automatically and manually controlling lighting systems with
TRILUX DALI luminaires. STEINEL LiveLink sensors enable
optimum energy savings, e.g. in office, school or industrial areas.
System commissioning is by using the LiveLink Install app (iOS
and Android) for Tablet PCs. LiveLink establishes a secure
network (WLAN, in accordance with IEEE 802.11b, WPA2
encryption) with the commissioning device. Pre-prepared room
configurations (Use Cases) simplify planning and commissioning
the system. Manually operating the system is either using the
LiveLink Control app on a smartphone or tablet PC, or by using
the standard installation push-button. The button functions are
freely programmable. LiveLink is optionally already integrated in
luminaires (master luminaires) or available as single system
components with accessories for installing in the ceiling cavity.
Product description
LiveLink sensor unit with integrated PIR presence sensor and
light sensor for connection to a LiveLink control device, for
daylight-dependent control, and for high-resolution presence
detection. Connection and electrical supply via the DALI
interface of the LiveLink control unit. Constant light control with
switch-off function with sufficient daylight. Passive infrared
presence sensor, with 4 digital pyro-sensors and 4800 switching
zones, settable switch-off delay time, optionally in automatic
mode (automatic on, automatic off) or semi-automatic mode
(automatic off, manual on). Special IQ mode for automatic
adaptation of delay time to room use. Steplessly scalable range
setting for highly precise planning. Temperature range: -25 °C +55 °C. 4 digital pyro-sensors and 4800 switching zones provide
maximum quality of detection. Presence range of 64 m² detects
minimum movements. Square detection zone, detection squares
for presence max. 8 x 8 m (64 m²) / radial max. 8 x 8 m (64 m²) /
tangential max. 20 x 20 m (400 m²) at recommended mounting
height of 2.8 m, permissible mounting height 5 m to 10 m.
Degree of protection IP 20.
30
120
40
Product features
Sensor is suitable for mounting in ceilings with standard cavity
wall sockets.Also suitable for ceiling surface-mounting with
special accessory. Electrical supply via the DALI interface of the
LiveLink control unit. Number of occupied DALI devices: 3. No
other mains connection required. Commissioning together with
the LiveLink control unit via the LiveLink app using a graphical
user interface. Settable parameters: Nominal value for constant
light control, Switch-off delay time, Semi-/fully automatic,
Activation IQ mode, Range test. Sensor range setting via
potentiometer on the sensor.
Specification text
LiveLink sensor unit with integrated PIR presence sensor and
light sensor for connection to a LiveLink control device, for
daylight-dependent control, and for high-resolution presence
detection. Connection and electrical supply via the DALI
interface of the LiveLink control unit. Constant light control with
switch-off function with sufficient daylight. Passive infrared
presence sensor, with 4 digital pyro-sensors and 4800 switching
zones, settable switch-off delay time, optionally in automatic
mode (automatic on, automatic off) or semi-automatic mode
(automatic off, manual on). Special IQ mode for automatic
adaptation of delay time to room use. Steplessly scalable range
setting for highly precise planning. Temperature range: -25 °C +55 °C. 4 digital pyro-sensors and 4800 switching zones provide
maximum quality of detection. Presence range of 64 m² detects
minimum movements. Square detection zone, detection squares
for presence max. 8 x 8 m (64 m²) / radial max. 8 x 8 m (64 m²) /
tangential max. 20 x 20 m (400 m²) at recommended mounting
height of 2.8 m, permissible mounting height 5 m to 10 m.
Degree of protection IP 20. Sensor is suitable for mounting in
ceilings with standard cavity wall sockets.Also suitable for ceiling
surface-mounting with special accessory. Electrical supply via
the DALI interface of the LiveLink control unit. Number of
occupied DALI devices: 3. No other mains connection required.
Commissioning together with the LiveLink control unit via the
LiveLink app using a graphical user interface. Settable
parameters: Nominal value for constant light control, Switch-off
delay time, Semi-/fully automatic, Activation IQ mode, Range
test. Sensor range setting via potentiometer on the sensor.
All technical data including details of weight and dimensions have been compiled with all due care. Errors excepted. Product illustrations serve as examples and may differ from the original. We
reserve the right to make alterations in the interest of improving our products. © TRILUX GmbH & Co. KG 2017/08/09 APPR

Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project