TAG_________________ ZXN-1612

TAG_________________ ZXN-1612
ZXN-1612
SPECIFICATION SHEET
ADJUSTABLE ROUND HEAVY-DUTY
NICKEL BRONZE CLEANOUT
TAG_________________
Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice
Pipe Size
Inches / [mm]
2-3-4
[51-76-102]
Approx.
Wt.
Lbs. / [kg]
8
[4]
K
Min.
1/2
[13]
Max.
1-3/8
[35]
ENGINEERING SPECIFICATION: ZURN ZXN-1612 Adjustable
Floor Cleanout, Dura-Coated cast iron body with neoprene body
sleeve, polished nickel bronze adjustable head and gasketed,
secured, scoriated heavy-duty cover with stainless steel screws.
OPTIONS (Check/specify appropriate options)
PIPE SIZE
(Specify size/type) OUTLET
2,3,4 [51,76,102]
PREFIXES
____ ZX-
Heavy-Duty Cast Iron Top
SUFFIXES
____ -CM
____ -G
____
-SP
X
____ -VP
____ -1600
Carpet Marker
Galvanized
Seal Plug (Z-1666)
Vandal-Proof Screws
Wide Flange Body
_____ NH
No-Hub
REV. A
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
E BODY HT. DIM.
3-3/4" [95mm]
DATE: 06/16/05
DWG. NO. 63650
C.N. NO. 89834
PRODUCT NO. ZXN-1612
ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V 1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292
In the U.S.: ZURN INDUSTRIES, INC. ♦ SPECIFICATION DRAINAGE OPERATION ♦ 1801 Pittsburgh Ave. ♦ Erie, PA 16514
Phone: 814/455-0921 ♦ Fax: 814/454-7929 ♦ World Wide Web: www.zurn.com
SPECIFICATION SHEET
Z-1666
SEAL or TEST PLUG
TAG______
Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice
Pipe Size
Inches / [mm]
1-1/2 - 2 - 3 - 4
[38 - 51 - 76 - 102]
Approx.
Wt.
Lbs. / [kg]
1
[0.5]
ENGINEERING SPECIFICATION: ZURN Z-1666 Seal or Test Plug.
OPTIONS (Check/specify appropriate options)
SUFFIXES
____ -CH
Centre Hole for Screw
REV.
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
DATE: 11/15/99
DWG. NO. 63653
C.N. NO. 83365
PRODUCT NO. Z-1666
ZURN INDUSTRIES LIMITED ¨ 3544 Nashua Drive ¨ Mississauga, Ontario L4V 1L2 ¨ Phone: 905/405-8272 Fax: 905/405-1292
In the U.S.: ZURN INDUSTRIES, INC. ¨ SPECIFICATION DRAINAGE OPERATION ¨ 1801 Pittsburgh Ave. ¨ Erie, PA 16514
Phone: 814/455-0921 ¨ Fax: 814/454-7929 ¨ World Wide Web: www.zurn.com
EZH2O® Bottle Filling Station
with Filtered Single LZ Cooler
Model Enhanced LZS8WSLP & LZS8WSSP
SPECIFICATIONS
RATED FOR INDOOR USE ONLY
PRODUCT SPECIFICATION
Unit shall include an electric water cooler with bottle filling station.
LZS8WSLP & LZS8WSSP shall deliver 8 GPH of 50°F of drinking water at
90°F ambient and 80°F inlet water. Lower unit shall have pushbar activation.
Bottle filling unit shall include an electronic sensor for touchless activation with an
automatic 20-second shut-off timer. LED light illuminating the water dispensing
area, brightening as water is being dispensed. Shall include a Green Ticker™
displaying count of plastic bottles saved from waste. Bottle filler shall provide
a 1.1 gpm flow rate with laminar flow to minimize splashing. Shall include the
WaterSentry® Plus 3000-gallon capacity filter, certified to NSF/ANSI 42 & 53,
with visual filter monitor to indicate when replacement is necessary. Unit shall
automatically detect a new filter and reset visual filter monitor accordingly. Unit
shall have the ability to turn off refrigeration system as needed, in addition
to self diagnosing system issues and relay messages related. Shall include
integrated silver ion anti-microbial protection in key areas. Unit shall meet ADA
guidelines. Unit shall be a lead-free design which is certified to NSF/ANSI 61
and 372 and meets Federal and State low-lead requirements. Unit shall be
certified to UL399 and CAN/CSA 22.2 No. 120 & is FCC compliant.
LZS8WSLP (light grey)
LZS8WSSP (stainless)
These units are replacing LZS8WSLK
and LZS8WSSK, respectively.
STANDARD FEATURES
• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)
• Easy-touch front and side pushbar controls (Cooler)
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste
• LED Visual Filter Monitor shows when replacement is necessary
• WaterSentry® Plus 3000-gallon capacity Filtration System, certified to
NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & Odor)
• Integrated Silver Ion Anti-microbial Protection in key areas
• Quick Fill Rate: 1.1 gpm
• Laminar Flow provides minimal splash
• Real Drain System eliminates standing water
• Cooler panel finishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel
• Automatic filter status reset with each filter change
COOLING SYSTEM
•
•
•
Compressor: hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is
permanently lubricated.
Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS
foam which meets UL requirements for self-extinguishing material.
• Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
• Temperature Control: Electronic temperature control requires no
adjustment
• Temperature Sensing Device: Fully solid-state temperature
sensing has no moving parts.
CONSTRUCTION
•
•
•
•
•
Stainless Steel basin with integral drain
Galvanized structural steel cooler chassis provides
structural integrity
Stainless Steel bottle filler wrapper with ABS plastic alcove
Cooler cabinet available as Light Gray Granite Vinyl Clad
Steel or Stainless Steel (additional cost) construction
Flexi-Guard® Safety Bubbler utilizes an infused
anti-microbial pliable polyester elastomer to prevent
accidental mouth injuries. Flexes on impact.
Replacement Filters: Available as Singles and Multi-packs.
Order part numbers:
•
•
•
•
•
51300C (single)
51300C_3PK (three)
51300C_12PK (twelve)
51300C_24PK (twenty-four)
51300C_48PK (forty-eight)
Optional:
•
Remote access to unit information/diagnostics
Contact Elkay or order P/N 1000001858
Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12 months
from date of installation or 18 months from factory shipment, whichever
date falls first.
CAPACITIES CHART
F.L.
Amps
Rated
Watts
Approx.
Ship
Wt.
ADA
Compliant
UL399 and
CAN/
CSA 22.2
No. 120
Certified
NSF/ANSI
61 and 372
Certified
NSF/ANSI
42 and 53
Certified
(Filter
only)
FCC
Compliant
•
•
•
•
•
•
•
•
•
•
Model
Voltage / Hertz
Chilling**
Capacity
LZS8WSLP
115V / 60 Hz
8.0 GPH
4.2
370
71 lbs.
LZS8WSSP
115V / 60 Hz
8.0 GPH
4.2
370
71 lbs.
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specification without notice.
Please visit elkay.com for the most current version.
This specification describes an Elkay product with design, quality and functional
benefits to the user. When making a comparison of other producer’s offerings,
be certain these features are not overlooked.
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
© 2015 Elkay
SPEC00259 (04/2015)
EZH2O® Bottle Filling Station
with Filtered Single LZ Cooler
ROUGH-IN DIMENSIONS
Model Enhanced LZS8WSLP & LZS8WSSP
RATED FOR INDOOR USE ONLY
NOTICE
This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non-metallic strainer which meets this
requirement. The drain trap which is provided by the installer should also be
plastic to completely isolate the cooler from the building plumbing system.
IMPORTANT! INSTALLER PLEASE NOTE:
These units are designed and built to provide water to the user which has not
been altered by materials in the cooler waterway. The grounding of electrical
equipment such as telephone, computers, etc. to water lines is a common
procedure. This grounding may be in the building but may also occur away from
the building. This grounding can cause electrical feedback into a water cooler
creating an electrolysis which results in a metallic taste or an increase in the
metal content of the water. This condition is avoidable by installing the cooler
using the proper materials as shown.
Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.
18"
458mm
7"
178mm
7"
178mm
7/16" X 3/4" (11mm X 19mm)
OBROUND HOLES (6)
C
L
6 3/8"
162mm
ACTIVATION
SENSOR
51 9/16"
1310mm
3 1/2"
90mm
6 3/8"
162mm
19"
483mm
15"
381mm
19"
482mm
O 9/32" (7mm)
HOLES (9)
HANGER
BRACKET
2 7/8"
73mm
38 1/2"
979mm
2"
51mm
2"
51mm
B
E
E
32 7/8"
835mm
ORIFICE
HEIGHT
FILTER
A
2"
51mm
8 1/16"
205mm
D
28 13/16"
731mm
28 13/16"
731mm
21 7/8"
556mm
31 5/16"
796mm
RIM
HEIGHT
C
3"
76mm
WATER
FILTER
19"
483mm
F
3 7/8"
98mm
17 7/16"
443mm
27"
686mm
ADA
REQUIREMENT
2"
51mm
5 3/4"
146mm
7"
178mm
13 15/16"
354mm
5 7/8"
149mm
12 1/2"
318mm
7"
178mm
FINISHED FLOOR
REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER
LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/4” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet
louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
NOTE: Installations Must Use Ground Fault Circuit Interrupter (GFCI).
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
Printed in U.S.A.
© 2015 Elkay
ZXN-211-A
SPECIFICATION SHEET
BODY ASSEMBLY
WITH "TYPE A" STRAINER
TAG______
Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice
Strainer
Dimensions In Inches / [mm]
A
B
Approx. Open Area
K
Str.
Pipe
Str.
Wt.
Sq. In. /
Size
Dia. Min. Max. Lbs. / [kg]
[sq cm]
Desig.
2-3-4
5
1/4 1-1/4
8
7
-A5
[51 - 76 - 102] [127] [6]
[32]
[4]
[45]
2-3-4
6
3/4 1-5/8
9
11
-A6
[51 - 76 - 102] [152] [19] [41]
[4]
[71]
ENGINEERING SPECIFICATION: ZURN ZXN-211-A Floor
and Shower Drain, Dura-Coated cast iron body with
bottom outlet, adjustable "Type A" heavy-duty polished
nickel bronze round strainer.
OPTIONS (Check/specify appropriate options)
PIPE SIZE
(Specify size/type) OUTLET
2,3,4 [50,75,100]
SUFFIXES
____ -G
____ -P
____ -VP
____ -X
____ -Y
____ -210
_____
NH
E BODY HT. DIM.
No-Hub
3 3/4 [95]
Galvanized Cast Iron
1/2" [13] Trap Primer Connection
Vandal-Proof Secured Top
Squeezin Backwater Valve
Sediment Bucket
8" [203] Wide Flange Body
REV.
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
DATE: 11/15/99
DWG. NO. 63608
C.N. NO. 83320
PRODUCT NO. ZXN-211-A
ZURN INDUSTRIES LIMITED ¨ 3544 Nashua Drive ¨ Mississauga, Ontario L4V 1L2 ¨ Phone: 905/405-8272 Fax: 905/405-1292
In the U.S.: ZURN INDUSTRIES, INC. ¨ SPECIFICATION DRAINAGE OPERATION ¨ 1801 Pittsburgh Ave. ¨ Erie, PA 16514
Phone: 814/455-0921 ¨ Fax: 814/454-7929 ¨ World Wide Web: www.zurn.com
ZN-211-BE
SPECIFICATION SHEET
BODY ASSEMBLY
WITH "TYPE BE" STRAINER
TAG______
Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice
Strainer
Dimensions In Inches / [mm]
A
B
Approx. Open Area
Str.
Pipe
Str.
Wt.
Sq. In. /
K
Desig.
Size
Dia. Min. Max. Lbs. / [kg]
[sq cm]
2-3-4
4
1/4 1-1/4
8
5
-BE5
[51 - 76 - 102] [102] [6]
[32]
[4]
[32]
ENGINEERING SPECIFICATION: ZURN ZN-211-BE
Funnel Floor Drain, Dura-Coated cast iron body with
bottom outlet, adjustable "Type BE" polished nickel
bronze round strainer with 4" [102] round funnel.
OPTIONS (Check/specify appropriate options)
PIPE SIZE
(Specify size/type) OUTLET
2,3,4 [50,75,100]
SUFFIXES
____ -G
____ -P
____ -VP
____ -X
____ -Y
____ -210
_____
NH
E BODY HT. DIM.
No-Hub
3 3/4 [95]
Galvanized Cast Iron
1/2" [13] Trap Primer Connection
Vandal-Proof Secured Top
Squeezin Backwater Valve
Sediment Bucket
8" [203] Wide Flange Body
REV.
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
DATE: 11/15/99
DWG. NO. 63611
C.N. NO. 83323
PRODUCT NO. ZN-211-BE
ZURN INDUSTRIES LIMITED ¨ 3544 Nashua Drive ¨ Mississauga, Ontario L4V 1L2 ¨ Phone: 905/405-8272 Fax: 905/405-1292
In the U.S.: ZURN INDUSTRIES, INC. ¨ SPECIFICATION DRAINAGE OPERATION ¨ 1801 Pittsburgh Ave. ¨ Erie, PA 16514
Phone: 814/455-0921 ¨ Fax: 814/454-7929 ¨ World Wide Web: www.zurn.com
Z1320
SPECIFICATION SHEET
ECOLOTROL CERAMIC DISC WALL HYDRANT
Encased, Non-Freeze, Anti-Siphon, Automatic Draining
TAG____________
Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice
WATER
Wall
Thickness
Inches [mm]
6-8 [152-203]
Approx.
Wt. Lbs.
[kg]
5 [2]
10-12-14 [254-305-356]
6 [3]
16-18 [406-457]
7 [3]
20-22-24 [508-559-610]
8 [4]
26-30 [660-762]
10 [5]
ENGINEERING SPECIFICATION: ZURN Z1320 Encased Ecolotrol "anti-siphon"
automatic draining wall hydrant for flush installation. Complete with copper
casing, all bronze interior parts with 1/2 turn ceramic disk cartridge and combination 3/4 [19] female solder and 3/4 [19] male pipe thread inlet. Nickel bronze box
and hinged cover with operating key lock and "WATER" stamped on cover. (All
solder connections are lead free.)
Item
14
13
9
8
7
6
OPTIONS (Check/specify appropriate options)
SUFFIXES
____ -CL
____ -PB
____ -RK
____ -RT12
____ -RT24
____ -RT36
____ -WC
____ -34EL
____ -34FIP
Cylinder Lock
Polished Bronze Face
Hydrant Parts Repair Kit
Ceramic Cartridge Removal Tool
(Up to 12 [305] Wall)
Ceramic Cartridge Removal Tool
(Up to 24 [610] Wall)
Ceramic Cartridge Removal Tool
(Up to 36 [915] Wall)
Wall Clamp
3/4 [19] IP 90° Solder Inlet Elbow
34 [19] IP Straight Female Inlet Adapter
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
REV. B
PARTS LIST
Name
Quan.
Cartridge
1
Operating Tube
1
Operating Coupling
1
'O' Ring
1
'O' Ring
2
Retaining Washer
1
DATE: 03/26/07
DWG. NO. 65227
C.N. NO. 89845
PRODUCT NO.
Z1320
ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V 1L2 ♦ Phone: 905/405-8272 Fax: 905/405-1292
In the U.S.: ZURN INDUSTRIES, INC. ♦ SPECIFICATION DRAINAGE OPERATION ♦ 1801 Pittsburgh Ave. ♦ Erie, PA 16514
Phone: 814/455-0921 ♦ Fax: 814/454-7929 ♦ World Wide Web: www.zurn.com
536-DST
536-TP-DST
LAVATORY
FAUCETS
537-TP-DST
Submitted Model No.: __________________________________________________
Specific Features: _____________________________________________________
■ Classic Series
■ Diamond™ Seal Technology
■ Single Handle Deck Mount
■ 3 Hole Sink Applications
■ 4" Centerset
STANDARD SPECIFICATIONS:
536-DST
536-TP-DST
537-TP-DST
• 4" (102 mm) centerset.
• 5" (127 mm) long spout.
• Lever handle. Control mechanism is the
diamond embedded ceramic disc cartridge.
• Control handle shall return to neutral position
when valve is turned off.
• 3/8” O.D. straight, staggered pex supply tubes 35" (889 mm) and 36" (914 mm) long.
• Models have a maximum 1.5 gpm flowrate @
60 PSI.
6 1/4"
(158.8 mm)
5"
(127 mm)
1 13/16"
(46.2 mm)
1 1/2"
(38.1 mm)
2 3/8"
(60 mm)
5"
(127 mm)
WARRANTY
4"
(101.6 mm)
• Lifetime Faucet and Finish Limited
Warranty to the original consumer
purchaser to be free from defects in
material and workmanship.
• 5 Year Limited Warranty for usage
in all industrial, commercial and
business applications.
1/ "
2
6
(165 mm)
35 1/2"
(895.4 mm)
37"
(939.8 mm)
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.2 / CSA B125.2
Indicates ADA compliance to
ICC/ANSI A117.1
• IAPMO Listed
• CSA Certified
• EPA WaterSense
UP
®
C
®
0
69
138
207
276
345
414
483
552
621
22.7
5
18.9
4
15.1
3
11.4
2
7.6
1
3.8
0
0
0
10
20
30
40
50
60
70
80
90
Pressure (PSI)
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.specselect.com for finish options and product availability.
DSP-L-536-DST Rev. A
55 E. 111th Street, Indianapolis, Indiana 46280
395 Matheson Blvd. E., Mississauga, ON L4Z 2H2
© 2010 Masco Corporation of Indiana
Flow (Liters Per Minute)
Flow (U.S. Gallons Per Minute)
Pressure (kPa)
6
249
Maverick™ I
Designer, 19" Round, Vitreous China,
Self-Rimming Lavatory
Model 249-4
(Less faucet, drain
assembly and supply)
Features
• 19" Round, designer, self-rimming lavatory
• Extra-wide tapered rim
• Concealed Front Overflow
• Available with single hole, 4" or 8" faucet centers
• Basin: 12-1/8" x 14-3/4"
• Complete Maverick Suite includes self-rimming lavatories, pedestal lavatory
and toilets
• Available in White, Standard Colors: Biscuit, Classic Bone and
Designer Color: Black (Consult Price Book for Specific Colors)
• Outstanding Protection — The Mansfield® limited lifetime warranty
• Complies with ADA requirements for accessibility
Model No.
SEC 2.indd 19
Description
Approx. Wt.
249-1
19" Round, designer, self-rimming lavatory
with single hole faucet center. Complete with
template and installation instructions. Less faucet,
drain assembly and supply. ADA compliant.
Specify color.
19 lbs.
(9 kg)
249-4
Same as above with 4" faucet center. Specify color.
19 lbs.
(9 kg)
249-8
Same as above with 8" faucet center. Specify color.
19 lbs.
(9 kg)
8/31/09 12:23:53 PM
249
Maverick™ I
Designer, 19" Round, Vitreous China, Self-Rimming Lavatory
Technical Information
Specifications
4 or 8”
(102 or 203 mm)
Material
Vitreous China
Size
19" Round
(483 mm)
Basin
12-1/8" x 14-3/4"
(308 mm x 375 mm)
Faucet Holes
Single Hole — 1-7/16"
3-1/4”
(83 mm)
7-1/2”
(191 mm)
4" Faucet Centers — 1-3/16"
(All Holes)
19”
(483 mm)
12-1/8”
(308 mm)
8" Faucet Centers — 1-7/16"
(All Holes)
Shipping Dimensions 19-5/8" x 19-5/8" x 8-3/4"
(498 mm x 498 mm x 222 mm)
Shipping Weight
21.6 lbs (10 kg)
Warranty
Limited Lifetime
14-3/4”
(375 mm)
1/2”
(13 mm)
19”
(483 mm)
19”
(483 mm)
8-1/2”
(216 mm)
These dimensions are nominal and are subject to
change without prior notice.
Fixture performance and specifications meet or
exceed, ANSI/ASME A112.19.2 and CSA B45.0
standards, and other state and local codes.
NOTE: Install this product according to the installation guide.
Fixture dimensions are nominal and conform to tolerances in ASME Standard A112.19.2
MODEL 249 ADA INSTALLATION
Finished Wall
24” Min.
(610 mm)
Finished Counter
1/2”
(13 mm)
34”
Min.
(864
mm)
8”
Min.
(203
mm)
6”
Min.
(152
mm)
27”
Min.
(686
mm)
9” Min.
(229 mm)
Finished Floor
See our complete line of acrylic and vitreous china bathroom
fixtures, plastic tank trim and plumbing products.
Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234
Website: www.mansfieldplumbing.com • Email: [email protected]
Form No. M249 Printed in U.S.A. 8/09
© 2009 Mansfield Plumbing Products LLC
SEC 2.indd 20
8/31/09 12:23:53 PM
Electronic Exposed
TECK Flush Valves
®
Approvals:
❏ 81T231HWA
Exposed Hardwire Operated
3/4" Top Inlet Urinal Fixture
• IAPMO listed to ASSE 1037/
ASME A112.1037/ CSA B125.37
•
Indicates compliance to
ICC/ANSI A117.1
• Polished chrome plated vandal resistant metal cover
with top mounted sensor operated H2OPTICS® electronics
• Right or left-hand supply installation
• ADA compliant, automatic operation hardwire powered infrared sensor
• Scratch resistant replaceable lens window
• Infrared sensor range adjustment of 203mm - 610mm (8"- 24"),
factory set at 16" (±2")
• Hardwire Adaptor 24VAC to 6VDC converter (supplied)
• Vandal resistant copper tube conduit
• Optional 24 hour automatic flush factory set to OFF
• Set-up sensor range adjustment indicator lights
• 24 VAC input, 6 second arming delay
• Electronic operated non-hold-open metal override
button with 5 second lockout
• (110 to 24 VAC Transformer not included. See selection below for
additional part number.)
• Quiet action, TECK® exposed diaphragm flush valve
• Chloramine resistant diaphragm
• Forged brass diaphragm retainer
• Renewable seat
• Polished chrome plated body
• External water conserving flush adjustment,
factory set to 1.9 litre (.50 gal.)
• 1" FIP / 3/4" copper sweat inlet adaptor, angle check stop with
protecting cap
• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve
outlet centers
• Vacuum breaker
• Cover tube, stainless steel wall flange, spud flange, spud nut,
and 330mm (13") outlet tube
• Recommended water supply:
Minimum flowing pressure – 25 psi (172 kPa)
Minimum flow rate – 8 gpm (30 L/min)
(Contact Delta Representative for
State and/or Local Approvals.)
Patented
Engineer/Architect Approval
Model Specified:
Approval:
Date:
81T231HWA
❏ 81T231HWA-19
Same as 81T231HWA, Not Field Adjustable
❏ 81T231HWA-05
Same as 81T231HWA, but set to 0.5 litre (0.125 gal.),
Not Field Adjustable
81T231HWA
Electronic Exposed TECK II
Flush Valve Retrofit Kits
®
121mm ±13mm
(4.75" ±.44")
❏ 81T231HWA-20
Same as 81T231HWA, but LESS stop, cover tube and wall flange
54mm
(2.13") MIN.
FINISHED
WALL
Stainless Steel
Coverplate
Junction Box
51 x 102mm
(2" x 4")
121mm
(4.76")
❏ 81T231HWA-20-19
Same as 81T231HWA-20, Not Field Adjustable
71mm
(2.81")
❏ 81T231HWA-20-05
Same as 81T231HWA-20, but set to 0.5 litre (0.125 gal.),
Not Field Adjustable
HARDWIRE WITH BATTERY BACKUP
Add suffix “BB” to Product Number. See DSP-BB for detailed specification.
4
VACUUM
BREAKER
TUBE
19mm
(0.75")
TRANSFORMERS
060704A
060771A
Note: Measurements may vary ± 6mm (0.25")
330mm
(13.0")
19mm (0.75")
SLIP JOINT NUT
& WASHERS
SUPPLIED
64mm
(2.5")
110 to 24VAC Class II 20VA
(for up to 5 Electronic Valves)
110 to 24VAC Class II 20VA
(for up to 10 Electronic Valves)
INLET:
25mm (1.0")
FIP OR
19mm (0.75")
COPPER
SWEAT
W/ADAPTOR
(SUPPLIED)
TOP OF FIXTURE
Note:
For high and low pressure applications, please see page
FEA-81T High Water Pressure note for more details.
Verify flow requirements with bowl manufacturer.
Refer to www.specselect.com for individual models.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Note: Use this page as a product submittal sheet.
DSP–81T231HWA
DSP–81T231HWA
Rev. H
Page 6.C.23
Rev. H
QDL2031/8
Optional Accessories
Certified
C30S
16˝ [41cm]
20 1/2˝ [52cm]
DBR10S
BG10S
BG10S
CA1W
8˝ [20cm]
8 1/16˝ [20cm]
31 1/4˝ [79cm]
■
O.D. 20 1/2" x 31 1/4" x 8" (52 x 79 x 20 cm)
Recommended for minimum 33" cabinet
QDL2031/8/3
QDL2031/8/4
QDL2031/8/1
3 hole - 1 1/2" diameter, 4" center-to-center FUN# 101.0045.182
4 hole - 4th hole on right hand side FUN#101.0045.183
1 hole on center FUN# 101.0045.180
Franke Kindred Canada Limited
P.O. Box 190, 1000 Kindred Road, Midland, Ontario, Canada, L4R 4K9 Phone: 866-687-7465 Fax: 800-361-8408
0312
■
61558
Model QDL2031/8 is a double (two equal size) bowl ledgeback sink with Spillway manufactured by Franke Kindred Canada Limited
from 20 gauge, 18-8 stainless steel. Product has a bright mirror finished rim and satin finished bowls. Sink is fully undercoated. Basket
strainer waste fittings (3 1/2", 89 mm) and installation kit are included. Sink is backed with a limited buyer lifetime warranty.
Printed in Canada
QDL2031/8 SPECIFICATION
Franke Kindred Canada Limited
11 3/4˝ [30cm]
14˝ [36cm]
15410
CT11W
4˝ [10cm]TYP
ø1 1/2˝ [ø4cm] TYP
Plumbing Fixture / Kitchen Sinks
MB1610
33888_830-AA Faucet Spec. Sheet
2/27/2003
4:32 PM
Page 1
Service-Sink Faucet
Model: 830-AA
FIAT
R
8” (203)
HOT
COLD
2-3/8” (60) DIA.
INTEGRAL STOPS
FRONT VIEW
9” (229)
APPROX.
BUCKET
HOOK
General:
830-AA Service Faucet - Chrome plated with
vacuum breaker, integral stops, adjustable wall
brace, pail hook and 3/4” hose thread on spout.
Body inlets 8” center to center, four arm
handles. Valves contain renewable hub,
renewable seats, swivel discs, encased washers
and brass washer screws.
Material:
Finish:
Commercial red brass alloy casting-rough finish.
1/2” (13) I.P.S.
MALE THREADS
1/8” (3) ECCENTRIC
1-1/2”(38)
Chrome plating exceeding requirements of
ANSI/ASTM B-456-71. Indicators cold (blue) and
hot (red) are included.
3/4” (19)
2-7/8” (73)
9-3/8” (238)
Specifications
and
Codes:
VACUUM BREAKER
3/4” (19) HOSE THREAD
SIDE VIEW
NOTE: These roughing measurements may
vary 1/4” (plus or minus).
In the U.S.A., meets or exceeds requirements of
ANSI-A112.18.1M-1979 for “Finished and
Rough Brass Plumbing Fixture Fittings.” In
Canada, meets or exceeds the requirements of
CSA standards B125 - “Plumbing Fittings,”
B64.1.1 - “Vacuum Breakers - Atmosphere
Type” and B64.0 - “General Requirements for
Backflow Preventers and Vacuum Breakers,”
and is approved under Product Class No. 6811
01 under Report #LM57412-1. Conforms to
ASSE 1001.
255 Hutchings St. • Winnipeg, MB • R2X 2R4 • Ph. 800-665-7531 • 204-633-6122 • Fx. 204-632-4854
e-mail: [email protected] • website: www.fiat.ca
A subsidiary of CR/PL, L.L.C. Company – Evanston, IL
33888_830-AA Faucet Spec. Sheet
2/27/2003
4:32 PM
Page 2
830-AA Group Replacement
Assembly Parts List
Group
Assembly
Part #
Description
GRA-02 Handle Mounting
Group Assembly
FIAT
Individual Components
Comprising Group Assembly
RP-01
RP-27
RP-21
RP-32
RP-33
RP-18
RP-24
RP-22
GRA-03 Coupling Assembly RP-14
RP-15
RP-05
RP-02
RP-10
RP-19
GRA-05 Brace Assembly
RP-13
RP-28(2)
RP-31
RP-11(2)
GRA-07 Vacuum Breaker
RP-26
& Disc Assembly
RP-09
RP-08
RP-20
RP-06
GRA-04
Packing Nut
Packing
Brass Washer
Spindle
Handle Hub
Seat Washer
Seat Washer Screw
Hub Washer
Wall Flange
Nipple
Bushing (socket)
Coupling Nut
Swivel
Washer
Brace Flange
S.S. Roll Pin
Wall Brace Rod
Wood Screw
V.B. Cap Screw
Cap
V.B Hub
V.B Hub Washer
Seat
Vacuum Breaker Disc
Assembly
Group
Assembly
Part #
Description
GRA-08 Complete Body
Assembly
GRA-09 Handle Assembly
(Cold)
GRA-10 Handle Assembly
(Hot)
GRA-11
Integral Stop
Assembly
RP-07
(2 per package)
Individual Components
Comprising Group Assembly
RP-29
RP-30
RP-12
RP-17
RP-25
RP-04
RP-16
RP-25
RP-04
RP-24
RP-23
RP-03
RP-21
RP-27
RP-01
RP-07
Center Body
V.B. Body
Nozzle
Cold Index
Handle Screw
Handle
Hot Index
Handle Screw
Handle
Seat Washer Screw
Washer
Spindle
Brass Washer
Packing
Packing Nut
Seat
R
Molded Stone
Mop Service Basins
®
FIAT
R
®
These rugged molded stone mop service basins are manufactured from the
SMC process under the highest quality standards. The quality control molding
is achieved in matched metal dies under intense heat and pressure with the
result being a one-piece, dependable homogeneous product. Color is White.
SPECIFICATIONS
• 10" (254) high walls with 1" (25) wide shoulders. Model MSB-3624 includes
an integrally molded shelf 10 9/16" (268) wide
• Stainless steel factory installed drain body complete with a QDC-3 joint
connector for a 3" (76) drain pipe
• A combination dome strainer and stainless steel lint basket is included
Ces robustes cuves d’entretien de vadrouilles molded stone sont fabriquées
grâce au procédé SMC selon les normes de qualité les plus rigoureuses afin
d’en assurer la durabilité et d’éliminer les problèmes après l’installation. Le
moulage se fait dans des matrices métalliques jumelées, à haute température
et sous une forte pression, ce qui assure un produit homogène et fiable d’une
seule pièce. La couleur est le blanc.
CARACTÉRISTIQUES
• Côtés de 10 po (254) avec épaulement de 1 po (25). Le modèle MSB-3624
comprend une tablette moulée intégrée de 10 9/16 po (268)
• Renvoi en acier inoxydable avec raccord QDC-3 pour tuyau de renvoi de 3
po (76)
• Crépine en coupole et filtre à charpie en acier inoxydable combinés compris
DIMENSIONS
MSB-3624
• 36” x 24” x 10” (914 x 610 x 254)
• Shipping weight / Poids à l’expédition: 70 lbs (32 kg)
MSB-2424
• 24” x 24” x 10” (610 x 610 x 254)
• Shipping weight / Poids à l’expédition: 50 lbs (23 kg)
OPTIONAL EQUIPMENT / ÉQUIPMENT FACULTATIF
830 AA – Wall mounted service faucet,
chrome plated with vacuum breaker, integral
stops, adjustable wall brace, pail hook and
3/4” (19) hose thread on spout. Body inlets 8”
(203) center to center, four arm handles.
Centre of spout outlet from back of wall
flange 93/8” (238). CSA approved
830 AA – Robinet de service mural chromé avec
coupe-vide, dispositif d’arrêt intégré, attache
murale réglable et filets pour boyau 3/4 po (19)
sur le bec. Conduites d’alimentation à 8 po (203)
de centre à centre et clés à quatre ailettes. 93/8
po (238) entre le centre du bec et l’arrière de la
bride murale. Homologué par L’ANCOR
889 CC – Mop Bracket, 24” (610) long x 3” (76)
wide, stainless steel with three (3) rubber grips
889 CC – crochet pour vadrouille, 24 po (610) de
long par 3 po (76) de large, en acier inoxydable
et muni de trois pinces à outils en caoutchouc
E-77-AA – Vinyl bumper guards in 24” or 36”
length
E-77-AA – butoirs en vinyle en 24 po ou 36 po
de long
1453 BB – Flat stainless steel strainer
1453 BB – Crépine plate en acier inoxydable
pour utilisation résidentielle
Quick Drain Connectors (QDC’s)
For Use
With
CAST IRON
SOIL PIPE
P.V.C. SCHED.
40 D.W.V.
STEEL
SCHED. 40
Raccord rapide pour tuyau d’écoulement (QDC’s)
QDC 3.2
QDC 3SN
QDC 3XH
QDC 4
For Use
With
CAST IRON
SOIL PIPE
P.V.C. SCHED.
40 D.W.V.
STEEL
SCHED. 40
QDC 3.2
QDC 3SN
QDC 3XH
QDC 4
FIAT
R
OPTIONAL EQUIPMENT / ÉQUIPMENT FACULTATIF
Stainless Steel Wall Guards
Made of heavy gauge stainless steel. Designed
and is used to protect walls adjacent to the
receptor. Two panels are supplied for a corner
installation, a third panel is required for a
recessed installation. The wall guard models
are identified as follows: MSG 2424, MSG
3232, MSG 3624, and MSG 3636
Protecteurs muraux en acier inoxydable
Fabriqués en acier inoxydable durable et de
haut calibre. Conçus pour protéger les murs
adjacents au récepteur. Deux panneaux sont
fournis pour une utilisation en coin, un
troisième panneau est requis pour une
utilisation en alcôve. Les modèles de
protecteurs muraux sont identifiés comme suit:
MSG 2424, MGS 3232, MSG 3624 et MSG 3636
832 AA – Hose and Bracket; 30” (762) long
flexible heavy duty 5/8” (16) rubber hose,
cloth reinforced with 3/4” (19) chrome
coupling at one end. Bracket is 5” (127) long x
3” (76) wide stainless steel with rubber grip
832 AA – Boyau et support :
Boyau en caoutchouc flexible de 5/8”(16) résistant,
30” (762) de long, renforcé à une extrimité avec
un assemblage de chrome de 3/4” (19). Support
de 5” (127) de long X 3” (76) de large en acier
inoxydable avec prise en caoutchouc.
**SPECIFICATIONS SUBJECT TO
CHANGE WITHOUT NOTICE.
255 Hutchings St. • Winnipeg, MB • R2X 2R4 • Ph. 800-665-7531 • 204-633-6122 • Fx. 204-632-4854
e-mail: [email protected] • website: www.fiat.ca
A subsidiary of CR/PL, L.L.C. Company – Evanston, IL
Exposed TECK Flush Valve
®
Specification: (example)
(FOR TOP INLET URINAL FIXTURE)
• Quietaction,TECK® exposed diaphragm flush valve
•Chloramineresistantdiaphragm
• Forgedbrassdiaphragmretainer
• Renewable seat
• Polishedchromeplatedfinish
• External water conserving flush volume adjustment,
factory set at 60 PSIto1.9litre(0.50USgal.)
• Vandalresistantcoverscrew
• Metal”nonholdopen”handle
• 1" FIP/3/4" copper sweat inlet adaptor angle check
stop with protecting cap
• Adjustable121mm(4-3/4")plusorminus11mm(7/16")
inlet/valve outlet centers
• Vacuumbreaker
• CovertubeandS/Swallflange,spudflangeandspudnut
FOR 3/4" TOP INLET URINAL FIXTURE
❏ 81T231
As above
81T231
❏ 81T231-38
Sameas81T231,butsetat60PSI to3.8litre
(1.0 US gal.), Not field adjustable.
❏ 81T231-19
Sameas81T231,Not field adjustable.
❏ 81T231-05
Sameas81T231,butsetat60PSI to0.5litre
(0.13 US gal.), Not field adjustable.
FOR 1-1/4" TOP INLET URINAL FIXTURE
(with 1" copper inlet adaptor)
❏ 81T291
As above
121mm
(4.75")
54mm
(2.13")MIN.
292mm(11.5")for81T291
330mm (13") for 81T231
OPTIONS AVAILABLE
(for Field Conversion):
❏ 060253A
3/4"x19-1/2"VBTube(for81T231)
®
Approvals:
• C
SAcertified
• CompliestoASSE1037
• ADAcompliantandmeetsHandicapped
AccessibilityStandardASMEA117.1of
lessthan5lbs.operatingforce.
(Contact Delta Representative for State and/or
Local Approvals.)
Engineer/Architect Approval
Note: For high and low pressure applications, please see page
FEA-81THighWaterPressurenoteformoredetails.
Verify flow requirements with bowl manufacturer.
ModelSpecified:
Approval:
Date:
Note:Measurementsmayvary±6mm(0.25")
Refer to www.specselect.com for individual models.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Note: Use this page as a product submittal sheet.
DSP-81T231Rev.A DSP-81T231Rev.A
Page 6.C.33
410HE
Cascade™
Half-Stall, Wash-Down, Vitreous China Urinal
Features
• Top spud, half-stall, wall-mount, wash-down
urinal with extended sides
• Complies with ADA requirements for accessibility
• 0.5* or *1.0 Gpf
(when using the proper flush valve)
• Integral trap
• The Mansfield® limited lifetime warranty
• Available in White
Model 410HE
Components
Model # Description
410HE
Codes/Standards
Half-stall, wash-down urinal. Mounting bracket included.
Less flushometer. Specify color.
Printed in U.S.A. 8/12
© 2012 Mansfield Plumbing Products, LLC
HEU
HIGH EFFICIENCY URINAL
Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234
Website: www.mansfieldplumbing.com • Email: [email protected]
410HE
Cascade™
Half-Stall, Wash-Down, Vitreous China Urinal
Specifications
Model #
410HE
Description
Codes/Standards
HEU
HIGH EFFICIENCY URINAL
Half-Stall, Wash-Down Urinal
Specification
Description
Specification
Description
Material
Vitreous China
Rough-in
Wall-mount
Inlet
3/4"
Shipping Weight
Model 410HE - 60 lbs.
Outlet
2"
Warranty
Limited Lifetime
Water Usage
0.5 or 1.0 Gpf
Technical Information
3/4" (19 mm) Dia.
Min. S.P.S. Supply
4-3/4"
(121 mm)
11-1/2"
(292 mm)
Finished Wall
18-3/8"
(467 mm)
7-1/4"
(192 mm)
1
53-1/2"
(1359 mm)
7-1/4"
(192 mm)
Mounting
Brackets
3/4" (19 mm) Spud
2-3/8"
(60mm)
18-1/8"
(460 mm)
17-3/8"
(441 mm)
26-7/8"
(683 mm)
38"
(965 mm)
Center
of Bottom
Slot in
Brackets
2"
(51mm)
Spud
3
Finished
Floor
14-3/4"
(375 mm)
Outlet Detail
2" (51 mm) N.P.S. Tap
NOTE: Outlet connection
2" female threads - protrude
1/2" past the urinal.
1/2"
(13 mm)
4
24"
(610 mm)
2
4"
(102 mm)
20-3/8"
(518 mm)
ADA Installation
1 44" (1118 mm)
2 28-1/2" (724 mm)
3 14-1/2"(368 mm)
4 10-7/8" (276 mm)
See our complete line of acrylic and vitreous china bathroom
fixtures, plastic tank trim and plumbing products.
These dimensions are nominal and subject to change
without notice.
Fixture performance and specifications meet or exceed
ASME A112.19.2-2008/CSA B45.1-08 standards, and other
state and local codes.
Printed in U.S.A. 8/12
© 2012 Mansfield Plumbing Products, LLC
Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234
Website: www.mansfieldplumbing.com • Email: [email protected]
Exposed TECK Flush Valve
®
Specification: (example)
(FOR 1-1/2" TOP INLET CLOSET FIXTURE)
• Quietaction,TECK® exposed diaphragm flush valve
•Chloramineresistantdiaphragm
• Forgedbrassdiaphragmretainer
• Renewableseat
• Polishedchromeplatedfinish
• External water conserving flush volume adjustment,
(except-48and-6models)factorysetat60PSI to 6 litre (1.6 US gal.)
• Vandalresistantcoverscrew
• Metal“nonholdopen”handle
• 1" FIP/copper sweat inlet adaptor angle check stop with
protecting cap
• Adjustable121mm(4-3/4")plusorminus11mm(7/16")inlet/valve
outlet centers
• Vacuumbreaker
• CovertubeandS/Swallflange,spudflangeandconcealedspudnut
WITH 292mm (11-1/2") LENGTH:
❏ 81T201
As above
❏ 81T201-1
Sameas81T201,butwithtrapsealprimertee
❏ 81T201-5
Sameas81T201,butwithcentercoverbumper
❏ 81T201-6
Sameas81T201,butNot Field Adjustable
❏ 81T201-48
Sameas81T201,butfactorysetat60PSIto4.8litre
(1.27 US gal.), Not Field Adjustable
❏ 81T201-56
Sameas81T201-5,butNot Field Adjustable
❏ 81T201-548
Sameas81T201-5,butfactorysetat60PSIto4.8litre
(1.27 US gal.), Not Field Adjustable
81T201
121mm(4.75")
WITH 610mm (24") LENGTH
❏ 81T221
As above
❏ 81T221-1
Sameas81T221,butwithtrapsealprimertee
❏ 81T221-6
Sameas81T221,butNot Field Adjustable
❏ 81T221-48
Sameas81T221,butfactorysetat60PSIto4.8litre
(1.27 US gal.), Not Field Adjustable
54mm
(2.13")MIN.
-1 OPTION TRAP SEAL PRIMER TEE
292mm(11.5")for81T201
610mm (24") for 81T221
DETERGENT/DISINFECTANT
®
Approvals:
• C
SAcertified
• CompliestoASSE1037
• ADAcompliantandmeetsHandicapped
AccessibilityStandardASMEA117.1of
lessthan5lbs.operatingforce.
(Contact Delta Representative for State and/or
Local Approvals.)
Engineer/Architect Approval
3/8"O.D.CopperTube
(NOT SUPPLIED)
Note: For high and low pressure applications, please see page
FEA-81THighWaterPressurenoteformoredetails.
Verify flow requirements with bowl manufacturer.
ModelSpecified:
Approval:
TO TRAP
SEAL
Date:
Note:Measurementsmayvary±6mm(0.25")
Refer to www.specselect.com for individual models.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Note: Use this page as a product submittal sheet.
DSP-81T201Rev.A DSP-81T201Rev.A
Page 6.C.31
1311NS
Baltic
Elongated Front, Flush Valve Toilet
10" Rough-in
Model 1311NS
(Less toilet seat, flushometer
and supply)
Features
• S pecifically designed for commercial and industrial applications
• 1.28* or 1.6 gpf low water consumption
(*when using the proper 1.28 flushometer)
• 2" glazed trapway
• 10" rough-in
• 1-1/2" top spud provided to accommodate many brands of flush valves
• Large 10" x 12-3/8" water surface
• Available in White and Standard Colors: Biscuit, Classic Bone
• Outstanding protection—The Mansfield® limited lifetime warranty
Model No.
1311NS
Description
Approx. Wt.
Elongated front (1.28* or 1.6 gpf) flush valve toilet bowl. 51 lbs. (23 kg)
(*when using the proper 1.28 flushometer) Less toilet seat, flush valve and supply. Specify color.
1311NS
Baltic
Elongated Front, Flush Valve Toilet - 10" Rough-in
Technical Information
Specifications
Material Water Pressure Range
Water Usage
Water Surface Area Trap Diameter
Trap Seal
Rough-in
Shipping Dimensions
Shipping Weight
Warranty
Vitreous China 20 to 80 P.S.I.
1.28 or 1.6 gpf / 4.86 or 6.0 lpf
10" x 12-3/8"
2"
3"
10"
Model 1311NS
28-1/8" x 15-13/16" x 16-1/4"
(714 mm x 402 mm x 413 mm)
Model 1311NS - 53.3 lbs. (24 kg)
Vitreous China - Limited Lifetime
Finished Wall
9-1/2"
(241 mm)
14-1/2"
(368 mm)
5-1/2"
(140 mm)
Typ.
10-1/2"
(267 mm)
19"
(483 mm)
14"
(356 mm)
19-1/8"
(486 mm)
3-1/4"
(82 mm)
4-3/8"
(111 mm)
Toilet
Footprint
28-3/4"
(730 mm)
1"
(25 mm)
14-1/4"
(362 mm)
Finished
Floor
10"
(254 mm)
NOTE: Install this product according to the installation guide and/or spec
sheet. Fixture dimensions are nominal and conform to tolerances in ASME
A112.19.2-2008/CSA B45.1-08 standards.
These dimensions are nominal and subject to change without notice.
Fixture performance and specifications meet or exceed ASME
A112.19.2-2008/CSA B45.1-08 standards, and other state and
local codes.
See our complete line of acrylic and vitreous china bathroom
fixtures, plastic tank trim and plumbing products.
Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234
Website: www.mansfieldplumbing.com • Email: [email protected]
Form No. M1311NS Printed in U.S.A. 7/10
© 2010 Mansfield Plumbing Products LLC
1319
Adriatic™
Smart Height™, Elongated Front,
Flush Valve, 1.28 or 1.6 Toilet - 10" Rough-in
Features
• Perfect for clinical applications
• High performance, high efficiency (HET)
• Bariatric / Supports up to 1,000 lbs.
• SmartHeight™ (17" high bowl) chair height
for maximum comfort
• 1.28 or 1.6 Gpf / 4.86 or 6.05 Lpf low water consumption*
• SAVE MONEY! Uses less water than conventional
1.6 gpf flushing systems*
• Can contribute 1 LEED point toward LEED
certification under Credits 3.1/3.2
• 1-1/2" top spud for flush valve installation,
will accommodate many brands of flush valves
• Large 9-7/8" x 11-7/8" water surface
• Available in White only
• ADA Compliant
• Outstanding protection — The Mansfield®
limited lifetime warranty
Model 1319
(Less toilet seat,
hardware and supply)
1
LEED
POINT
Model No.
1319
Description
SmartHeight™, elongated front (1.28 or 1.6 Gpf/
4.86. or 6.05 Lpf) toilet. Includes a 1-1/2" top spud.
Less toilet seat, flush valve and supply.
White only.
Approx. Wt.
55 lbs.
(25 kg)
*When using the proper 1.28 flushometer
SEC 3.indd 23
8/31/09 2:02:26 PM
1319
Adriatic™
Smart Height™, Elongated Front,
Flush Valve, 1.28 or 1.6 Toilet - 10" Rough-in
Technical Information
9 5/8
(245mm)
Specifications
FINISHED WALL
Material
Vitreous China
Water Pressure Range
20 to 80 P.S.I
Water Usage
1.28 or 1.6 Gpf / 4.84 or 6.05 Lpf
Water Surface Area
9-7/8" x 11-7/8"
Trap Diameter
2"
5''
(127mm)
5 - 1/2''
(140 mm)
Typ
10 1/2''
(265mm)
15 5/8''
(397mm)
19 1/4''
(488mm)
14''
(356 mm)
Trap Seal
3"
Rough-in
10”
Shipping Dimensions
Model 1319
27-7/8" x 16" x 19-5/8"
(708 mm x 406 mm x 498 mm)
19 1/8''
(460mm)
28-3/4''
(730 mm)
Shipping Weight
Model 1319 - 57.8 lbs (26 kg)
Warranty
Vitreous China Limited Lifetime
3-1/4''
(82 mm)
4 3/4''
(121 mm)
1''
(25 mm)
29 1/2''
(736mm)
17''
(430mm)
17 5/16''
(439mm)
These dimensions are nominal and are subject to change
without prior notice.
Fixture performance and specifications meet or exceed,
ANSI/ASME A112.19.2M standards and CAN/CSA B45.0
standards, and other state and local codes.
FINISHED
FLOOR
10''
(254 mm)
USE TEMPLATE SUPPLIED WITH TOILET.
NOTE: Install this product according to the installation guide.
Fixture dimensions are nominal and conform to tolerances in ASME Standard A112.19.2M
Engineered to dramatically meet or exceed all ANSI
weight/load bearing requirements.
Meets or exceeds American Disabilities Act and ANSI
A.117.1 requirements where installed so top of rim is 17"
(432 mm) from the finished floor.
See our complete line of acrylic and vitreous china bathroom
fixtures, plastic tank trim and plumbing products.
Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234
Website: www.mansfieldplumbing.com • Email: [email protected]
Form No. M1319 Printed in U.S.A. 8/09
© 2009 Mansfield Plumbing Products LLC
SEC 3.indd 24
8/31/09 2:02:26 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement