Video Display
Video Display
User guide
675 46
06/10-01 PC
Contents
1. Introduction and basic functions
■■ General information
5
■■ Answering Machine ✔✔ Message display
✔✔ Record a "Post-it" message
✔✔ Record a Welcome message
✔✔ Delete all messages
✔✔ Settings
6
6
7
7
7
8
10
11
12
13
14
15
16
16
17
18
19
19
2. Trouble shooting
21
3. Video door entry system functions
25
■■ Activation
26
26
27
27
28
28
■■ Your Video Display: use it now!
✔✔ Video door entry function keys
✔✔ Navigation keys
✔✔ Key for answering machine functions
■■ Menu functions
✔✔ Volume adjustment
✔✔ Monitor adjustment (day/night)
✔✔ Date/Time
✔✔ Camera swing
✔✔ Bells adjustment
✔✔ Paging
✔✔ Push to Talk mode
■■ Intercommunication
■■ Camera
■■ Cycle cameras
■■ Staircase lights
■■ Call exclusion
4. Home automation functions
29
■■ Scenarios
■■ Temperature control
30
31
32
33
5. Services
35
■■ The “Settings” menu
36
37
37
37
38
38
39
■■ Alarms
■■ Sound system
■■ Services
✔✔ Professional studio
✔✔ Hands free
✔✔ Door state
✔✔ Alarm messages
■■ Messages
22
3
IMPORTANT WARNING
On the rights of people involved in the taking of pictures and the recording of sounds.
• The Video Display which you have purchased contains technological devices which allow
the taking of films.
• The films, sounds, voice and names are personal data – sometimes sensitive – and can be
the subject of copyright or other rights of intellectual ownership by third parties.
• Consequently, anyone using the equipment is obliged to respect:
– legislation regarding the protection of personal data;
– data security obligations;
– picture and portrait rights, as well as the regulations on copyright and
intellectual and industrial property.
•
Legrand is not responsible for the illegitimate use of its equipment by its customers.
1
Introduction and basic functions
■■
■■
General information
Your Video Display: use it now!
✔✔ Video door entry function keys
✔✔ Navigation keys
✔✔ Key for answering machine functions
■■
Menu functions
✔✔
✔✔
✔✔
✔✔
✔✔
✔✔
■■
Volume adjustment
Monitor adjustment (day/night)
Date/Time
Camera swing
Bells adjustment
Paging
Answering Machine
✔✔
✔✔
✔✔
✔✔
✔✔
Message display
Record a "Post-it" message
Record a Welcome message
Delete all messages
Settings
5
1 - Introduction and basic functions
■■ General information
■■ Your Video Display: use it now!
The Video Display offers the normal video door entry and Video door entry system functions and can also interact with your My Home Legrand
system.
Fitting in with My Home Legrand
9
•Scenarios:
Runs the scenarios saved in the Scenario module.
1
•Alarms:
Signals the last alarm events which have occurred and the division of
the system.
2
•Sound system:
Manages the Legrand digital sound system.
OK
•Temperature control:
Displays and adjusts the temperature in the various zones of the home
and the state of the control unit.
–
C
8
+
3
4
7
5
LCD screen note
The LCD screen has been manufactured using advanced high
precision technology. It is however possible that sometimes up to
5 small black or coloured dots (red, blue, green) may appear on the
LCD screen. This is an absolutely normal result of the manufacturing
process and is not indicative of a malfunction and/or fault.
6
1 - Microphone
2 - LCD 3.5” colour display
3 - Navigation keys
4 - Entrance panel and cycling
switching ON key
5 - Connection key
Incorrect use of the Video Display and of all the devices connected
to it excludes any guarantee!
For cleaning only use a damp or antistatic cloth. Avoid the use
of alcohol or chemical detergents.
6
6 - Loudspeaker
7 - Door lock key
8 - Pushbutton for enabling/
disabling the answering
machine function
9 - Call exclusion LED*
* It lights up when the bell volume is set to 0.
1 - Introduction and basic functions
✔✔ Video door entry function keys
✔✔ Navigation keys
Activation Entrance Panel/Cycling
It activates the switching on of the associated Entrance
Panel and, if present, allows the cycling display of the
other Entrance Panels/cameras.
OK key
Allows access to the menu; confirms the selection
made.
Door lock key
When there is a call it opens the door lock of the Entrance Panel
from which the call was made, at rest that of the associated
Entrance Panel. The LED signals that it is activated.
Connection key
Activates/deactivates the audio connection.
When a call has been received the LED flashes; press
once to answer: the LED shines steadily.
At rest activates the paging function (if enabled).
keys
Inside the menu they select the previous or next
item.
- + keys
Inside the menu they change the value set.
In audio/video connection they allow rapid access to
the volume and monitor settings.
C key
Returns to the previous window. If you are already on
the first window it switches the display off.
✔✔ Key for answering machine functions
7
ON/OFF
Enable/disable the video door entry answering
machine (the red LED indicates activation).
NOTE 1: all answering machine functions are managed by
menù, access by a dedicated icon on menù.
NOTE 2: inside one single apartment,it is possible to activate
ONLY ONE answering machine.
1 - Introduction and basic functions
■■ Menu functions
COMMUNICATION
Use the OK key to access the main menu:
Main menu example with programming of just the COMMUNICATION
commands.
1
2
2
1
1
1
1) Answering machine
2) Intercommunication
3) Staircase lights
4) Settings
SETTINGS
1
Use the ANSW. MACHINE
1
2
2
3
4
HOME AUTOMATION
keys to select the functions from those available:
Main menu example with communication and home automation
submenu.
1
2
3
1) Submenu and commands
2) Use the settings icon to access a series of adjustments/services
described below
1) Communication
2) Scenarios
3) Alarms
4) Sound system
Three possible solutions for drawing up the main menu are given below:
• menu with COMMUNICATION functions;
• menu with HOME AUTOMATION functions;
• CUSTOMISED menu.
5) Temperature control
SCENARIOS
8
4
6) Settings
5
6
1 - Introduction and basic functions
CUSTOMISED MENU
The installer has given the exact configuration of your Video Display
the tables below; if he has not filled it in ask for it.
The customised menu allows more intuitive use of the Video Display
functions. In fact the menu only displays the functions in your My Home
Legrand system and the text of each command can be customised in
the installation phase.
COMMUNICATION
Using the customised menu also lets you:
FUNCTIONS
• Have the PROFESSIONAL STUDIO, HANDS FREE and ANSWERING MACHINE functions, which otherwise can only be called from the SETTINGS menu, in the main page or in another page.
1
2
DESCRIPTION
3
1) Communication
2) Professional studio
3) Hands free
4) Answering machine
HOME AUTOMATION
5) Settings
SUB-MENU
SETTINGS
4
SYSTEM FOUND
SCENARIOS
5
9
ALARMS
SOUND SYSTEM
TEMPERATURE CONTROL
1 - Introduction and basic functions
✔✔ Volume adjustment
NOTE: During a video door entry call you can access the Adjustments
menu directly by pressing the - or + key.
Inside the menu select
one of the items
(e.g. Bells)
Select
Adjustments
Press OK to access
the menu
Adjust the volume to
the level required.
BELLS
ADJUSTMENTS
EP SOUND = sound volume when talking to the entrance panel.
INTERCOM = sound volume when holding an intercom conversation.
Press OK
to confirm
BELLS = volume level for all the bells.
VOLUME
10
1 - Introduction and basic functions
✔✔ Monitor adjustment (day/night)
NOTE: During a video door entry call you can access the Adjustments
menu directly by pressing the - or + key.
Select
Adjustments
Inside the menu select
one of the items
(e.g. Contrast)
Press OK to access
the menu
COLOUR
ADJUSTMENTS
Select
Day Monitor
Make
the adjustment
Press OK
to confirm
CONTRAST
DAY MONITOR
11
1 - Introduction and basic functions
✔✔ Date/Time
Sets the current date and time.
Select
Adjustments
> TIME
DATE
:17:36:50
:12:03:10
Press OK to access
the menu
Press OK; the first two
numbers flash
Set the hour
ADJUSTMENTS
Press OK
to confirm
Select
Date/time
TIME
> DATE
:17:36:50
:12:03:10
Set the minutes
Press C
Press OK
to confirm
Use the same procedure to set
the date
DATE/TIME
12
1 - Introduction and basic functions
✔✔ Camera swing
NOTE: This menu can only be accessed during the connection with the
entrance panel, if this is set up for the camera swing.
Select
Adjustments
Adjust the correct
camera angle
Press OK to access
the menu
ADJUSTMENTS
Select
Swing bracket
Press OK
to confirm
SWING BRACKET
13
1 - Introduction and basic functions
✔✔ Bells adjustment
You can associate one of sixteen tunes to each call event.
01
Choose the tune
Adjust the volume
TUNE
Select
Bells
Select Confirm and then OK to
save the selection and return to the
previous page
CALL FROM EP = call from the entrance panel (S=0 o S=1)
Press OK to access
the menu
BELLS
INTERNAL INTERCOM = call from the intercom in your apartment
EXTERNAL INTERCOM = call from an intercom in another apartment
Select
the event
CALL TO THE FLOOR = call from the pushbutton near your entrance door
Press OK
to confirm
KEY SOUND = enable/disable sound when keys are pressed
CALL FROM EP (S=0)
14
1 - Introduction and basic functions
✔✔ Paging
The page function can be activated directly by pressing the key (if the installer has configured it).
Once the communication is activated the voice will be played on the whole
system.
15
1 - Introduction and basic functions
■■ Answering Machine
With this function it is possible to save and play back any audio and video
messages left from visitors in case of absence; an audio message can also
be saved directly from the Video Display (Post-it function).
To activate de function press M. The red LED comes on to indicate that
the answering machine is active. Press the same key to disable. The red
LED will flash if messages are present.
Calls from an entrance panel can be answered also when the answering
machine is active.
The submenu can only be accessed if there are messages
Select the function
✔✔ Message display
MESSAGES
Press OK to access the
Main menu
Press OK to confirm
> 001
002
003
004
005
006
Select the function
ANSW. MACHINE
Press OK to confirm
16
11:30
16:12
09:41
15:55
12:33
10:18
27/02/2010
27/02/2010
28/02/2010
28/02/2010
01/03/2010
02/03/2010
The list of recorded messages is
displayed
Scroll the message list
Press OK to display the
desired message
1 - Introduction and basic functions
✔✔ Record a "Post-it" message
This function can be used to record an audio message directly from the
Video Display.
Press OK. The video is
paused.
Select the function
RECORD POST-IT
Press OK to confirm
It will now be possible
to delete the selected
video using the Delete
icon, or resume playback by selecting Play
DELETE
A BEEP will mark the start of
recording RECORD POST-IT
It is now possible to record a
message up to 16 seconds long
A BEEP will indicate end of the
recording
After resuming playback press C to return
to the message list
The message will be shown
together with the ones from the
entrance panel
17
1 - Introduction and basic functions
✔✔ Record a Welcome message
To record a Welcome message:
It is now possible to play back the
recorded message, to ensure that
it has recorded correctly
Select the function
Select the function
RECORD WELCOME
LISTEN TO WELCOME
Press OK to confirm
RECORD WELCOME
Press OK to confirm
A BEEP will mark the start of
recording LISTEN TO WELCOME
It is now possible to record a
welcome message up to 8 seconds long
The message is played back
A BEEP will indicate end of the
recording
18
1 - Introduction and basic functions
✔✔ Delete all messages
✔✔ Settings
To delete all messages at once:
This function can be used to enable/disable the Welcome message and
select the message recording mode
Select the function
Select the function
DELETE MESSAGES
SETTINGS
Press OK to confirm
DELETE MESSAGES ? > QUIT
CONFIRM
Select Quit to return to
the menu
or
Select Confirm to delete all messages
WELCOME
Press OK to confirm
19
To enable/disable the
welcome message select the corresponding
icon and press OK to
confirm
(Icon off = disabled; Icon
on = enabled)
1 - Introduction and basic functions
The following screen appears:
DELETE MESSAGES ? > QUIT
CONFIRM
To select the message
recording mode select
the corresponding icon
Select Quit to return to
the menu
or
Select Confirm to delete all messages
1 PHOTO MODE
Two modes are available.
Photo 1: the message contains
one photo of the visitor and the
audio message that has been
recorded. (160 max)
Footage: the message contains a
16 second footage and its audio
message. (18 max)
When the recording
mode is changed
all messages will be
deleted!
Press OK to change
mode
20
2
Trouble shooting
✔✔ Push to Talk mode
21
2 - Trouble shooting
✔✔ Push to Talk mode
Receiving a call from the entrance panel.
Press the Connection key to answer the call.
The connection LED lights up.
During the conversation you can activate the PUSH TO TALK function.
Press the Connection key for at least 2 seconds to talk to the entrance
panel.
The LED remains ON.
22
2 - Trouble shooting
Release the key to hear from the entrance panel.
The LED becomes red.
To end the connection press the connection key briefly.
The LED goes out.
23
2 - Trouble shooting
PROBLEM
On pressing the Entrance panel Activation/Cycling key (
appears.
SOLUTION
) no picture
- the audio/video channel may be busy, wait for it to become free
(from 1 to 3 minutes) and try again.
On pressing the OK key the menu does not switch on and the
handset gives a busy sound
- the audio/video channel is busy, wait for it to become free (from 1 to 3
minutes) and try again.
When called the handset does not ring
- check that the call has not been excluded (the call exclusion LED is
ON);
- check the configuration of the devices.
At the entrance panel it is difficult to hear the caller
- talk at a maximum distance of 40 centimetres from the Video
Display microphone;
- check the entrance panel settings with the installer and if necessary
reduce the microphone volume;
- you can communicate in PUSH TO TALK mode (see description on
next page).
At the handset it is difficult to hear the caller
- check the volume setting on the Video Display;
- make sure that there are no strong noise sources near the Video Display;
- you can communicate in PUSH TO TALK mode (see description on
next page).
The answering machine does not activate
- The handset is set as SLAVE and the installer has enabled the answering
machine on another handset (activate the answering machine on that
handset).
24
3
Video door entry system
functions
■■
■■
■■
■■
■■
■■
Activation
Intercommunication
Camera
Cycle cameras
Staircase lights
Call exclusion
25
3 - Video door entry system functions
■■ Activation
■■ Intercommunication
This function activates an actuator or an entrance panel. As an example
you can activate the opening of a secondary gate.
This function allows conversation with other video handsets/ handsets
installed in your home or in other apartments.
ACTIVATION I
Press OK to access
the Main menu
Press OK to access
the Main menu
Select
the function
Select
the extension to call
INTERCOMMUNICATING I
Press OK
to confirm
Press OK
to confirm
Command Performed appears on
the screen briefly
COMMAND PERFORMED
To quit the menu press the C key
COMMAND PERFORMED
26
Command Performed appears briefly
and then the screen switches off
If the audio/video channel is occupied
by another user you hear a sound and
the command is not performed.
Wait until the channel is free and
try again.
If there is a call from the entrance panel,
the conversation is interrupted.
3 - Video door entry system functions
■■ Camera
■■ Cycle cameras
This function lets you monitor your home, activating one of the cameras
in the apartment and in the common areas (e.g. garage or garden).
This lets you display the pictures taken by all the cameras installed one
after the other. Once activated the Video Display displays the first camera
for 10 seconds, then goes to the next. When the cycle is complete, the
screen switches off.
You can stop on the display of one camera by pressing the Connection key.
The working camera remains active and if it belongs to an entrance panel
the sound communication is activated as well.
Press OK to access
the Main menu
Select
Cycle cameras
Select the camera
to activate
CYCLE CAMERAS
CAMERA I
Press OK
to confirm
The picture taken by the camera
selected appears on the screen (if
the audio/video channel is occupied
by another user the command is not
performed. Wait until the channel is
free and try again).
If there is a call from the entrance
panel, the connection will be interrupted.
27
Press OK to Confirm
(if the audio/video
channel is occupied
by another user the
command is not
performed. Wait until
the channel is free and
try again).
If there is a call from
the entrance panel,
the connection will be
interrupted.
3 - Video door entry system functions
■■ Staircase lights
■■ Call exclusion
Lets you switch on the lights at the entrance or on the stairs.
This lets you enable/disable the call bell.
If the bell is disabled the call exclusion LED lights up.
Led
Press OK to access the
Main menu
Select the Staircase
light function
OK
C
–
+
STAIRCASE LIGHTS
Press OK to confirm
To activate the call exclusion set the “Bell” volume to zero (see Volume
Adjustments chapter).
COMMAND PERFORMED
Command Performed appears on
the screen briefly then the Main
menu returns.
28
4
Home automation functions
■■
■■
■■
■■
Scenarios
Alarms
Sound system
Temperature control
29
4 - Home automation functions
■■ Scenarios
Your Video Display communicates with the Legrand automation system, activating the scenarios.
The installer has given a brief description of the scenarios set in the
tables below, if he has not filled it in ask for it.
SCENARIO
Inside the Main menu
select Scenarios
SCENARIO I
SCENARIO II
SCENARIO III
Press OK
to confirm
SCENARIO IV
SCENARIOS
SCENARIO V
Select the scenario
you want to activate
Press OK
to confirm
SCENARIO I
Command Performed appears on
the screen briefly
To quit the menu press the C key.
30
DESCRIPTION
4 - Home automation functions
■■ Alarms
Your Video Display communicates with the Legrand burglar-alarm system, in particular giving information on the system state, the active
zones and the last 3 alarms given.
Alarms icons key:
Inside the Main menu
select Alarms
Press OK
to confirm
ARMED
ANTIPANIC
DISARMED
TECHNICAL
INTRUSION
TAMPERING
FREEZER
FIRE
EMERGENCY
CALL
GAS LEAK
TELERESCUE
FLOOD
ALARMS
The information screen appears
31
4 - Home automation functions
■■ Sound system
The information in the screen is read as indicated below:
If your Video Display is connected to the Legrand sound system you can
check it.
2
Inside the Main menu
select Sound system
3
1
Press OK to access
the menu
SOUND SYSTEM
1) State of the 8 zones managed by the burglar-alarm system: the
corresponding number (from 1 to 8) is indicated for each active zone
Using the - + keys
2) System state = ON/OFF
3) Information on the last 3 alarms:
Type of alarm, Zone or Channel of origin
SOUND SYSTEM
Technical Alarms:
GAS LEAK FREEZER FLOOD EMERGENCY CALL
C=1
C=2
C=3
C=4
TECHNICAL GENERIC
FIRE
TELERESCUE
C=5,6,7
C=8
C=9
NOTE: when the burglar alarm is switched on, the memory of the
last 3 alarms is cancelled; if the siren is active, a further alarm can’t be
visualized.
CD
you can activate/deactivate the sound
system*, adjust the
volume, select the
CD track or change
the radio station and
select the musical
source.
* –One-channel system: general activation, of the single room and of the single amplifier if
the Video Display is programmed by PC.
–Multi-channel system: activation of the single room and of the single amplifier if the
Video Display is programmed by PC.
32
4 - Home automation functions
■■ Temperature control
Your Video Display lets you control and adjust the temperature inside
the home, interacting with the Legrand temperature control system.
1
SOUND SYSTEM
2
3
4
Inside the Main menu
select Temperat.
control system
5
CD
1)
2)
3)
4)
5)
Press OK
to confirm
Press the - and + keys to select amplifier
Press the - and + ON/OFF the system
Press the - and + adjust the volume
Press the + key to select the music source (radio, CD, etc.)
Press the - and + keys to change the radio station or choose the
CD track
TEMPERAT. CONTROL
TEMP. CONTROL UNIT
20.5 °C
You can set the manual mode and
adjust the temperature with the - + keys.
Set the heat protection
33
4 - Home automation functions
You can set the temperature on different levels in the various system
zones.
1
1
ZONES: 01
TEMP. CONTROL UNIT
2
20.5 °C
3
2
4
4
1) Press the - and + keys to select Temperature control unit/Zones
2) To set the manual mode and adjust the temperature use the - and
+ keys and then press OK to confirm
3) To set the Weekly mode; press OK to confirm (the last weekly
program selected on the Temperature control unit is set)
4) Press the + key to set the protection (antifreeze for winter or heat
protection for summer);
Pressing the - key switches the system OFF
3
20.5 °C
22.5 (+2)
18.5°C
5
1) Press the - and + keys to select Temperature control unit/Zones
2) To set the manual mode and adjust the temperature use the - and
+ keys and then press OK to confirm
3) To set the Automatic mode; press OK to confirm (in this case resets
the mode set on the Temperature control unit for this zone)
4) Press the + key to set the protection (antifreeze for winter or heat
protection for summer);
Pressing the - key switches the zone OFF
5) Display the zone’s current state.
34
5
Services
■■
■■
The “Settings” menu
Services
✔✔
✔✔
✔✔
✔✔
■■
Professional studio
Hands free
Door state
Alarm messages
Messages
35
5 - Services
■■ The “Settings” menu
The main menu always has the SETTINGS icon. Selecting it gives access
to a wide range of customisations which let you get the most from your
Video Display.
SETTINGS
ADJUSTMENT
VOLUME
MONITOR
SWING
Inside the Main menu
select Settings
SERVICES
Press OK to access
the menu
PROF. STUDIO
HANDS FREE
DOOR STATE
ALARM MSG
SETTINGS
MESSAGES
1
2
3
BELLS
The following page is displayed
with the icons:
SERVICES
4
INFORMATION
1) Adjustments (see chapter 1)
2) Services
3) Messages
4) Bells
5) Information
6) Configuration
5
CAUTION
CONFIGURATION
6
36
Only the installer has access to the
CONFIGURATION menu; incorrect
operations could affect the operation
of the Video Display.
5 - Services
■■ Services
✔✔ Professional studio
✔✔ Hands free
The Professional Studio function lets you set the automatic opening of
the door lock when there is a call from the Entrance Panel. It cannot be
activated at the same time as the Door State function.
The Hands Free function automatically activates the microphone and
loudspeaker when there is a call, avoiding having to press the Connection
key to answer (the connection is established immediately the call is
made).
Select
Services
Select
Services
Press OK
to confirm
Press OK
to confirm
SERVICES
SERVICES
Enable or disable
the function
PROF. STUDIO
If you enable this function your Video
Display door lock LED flashes to
remind you.
Enable or disable
the function
HANDS FREE
37
If you enable this function your Video
Display door lock LED flashes to
remind you.
5 - Services
✔✔ Door state
✔✔ Alarm messages
This function tells you about the door lock state. If it is open the “door
lock LED” flashes, if it is closed it remains OFF.
NOTE: it can only be activated if your system allows it (ask your installer
for more information); it can not be activated at the same time as the
Professional Studio function.
If it is activated the Video Display tells you if the antintrusion system has
detected an alarm. The three LED flash alternately until a key is pressed
to display the message (if locally supplied the message will be displayed
automatically).
To cancel the message press the C key when the message is displayed. If
not the signal will appear the next time a key is pressed.
Select
Services
Select
Services
Press OK
to confirm
Press OK
to confirm
SERVICES
SERVICES
Select
Door state
Select
Alarm MSG
Enable or disable
the function
Enable or disable
the function
DOOR STATE
ALARM MSG
38
5 - Services
■■ Messages
Select
Messages
Press OK
to confirm
MESSAGES
- 1 +
Message from
switchboard
Select the message
you want to display
Press C to return to
the previous page
There are messages, the menu can be selected.
No messages, the menu cannot be selected.
39
www.legrandgroup.com
Legrand reserves at any time the right to modify the contents of this booklet and to communicate, in any form
and modality, the changes brought to the same.
World Headquarters and
International Department
87045 LIMOGES CEDEX FRANCE
: 33 5 55 06 87 87
Fax: 33 5 55 06 74 55
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement