Time Electronics Calibration, Test and Measurement Product Brochure www.timeelectronics.com Contents Decade Boxes Resistance, capacitance, and inductance.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...... 3- 4 Portable Voltage and Current Test Equipment Handheld and transportable calibrators, simulators, and sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...... 5-6 Portable Loop and Temperature Calibration Instruments Handheld loop calibrators, RTD and thermocouple calibrators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...... 7-8 Pressure Calibration Instruments Calibration pumps, field calibrators, and digital pressure gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 9-10 Electrical Test Calibrators Instruments for rapid calibration of electrical test equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 Multifunction Calibrators 5025 and 5051 Precision calibrators for wide workload coverage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 13-16 ATE/Bench Calibrators and Digital Multimeters Multi-purpose calibrators and benchtop DMMs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 17-18 Calibration Benches Comprehensive modular test benches and complete laboratory design. . . . . . . . . . . . . . . . . . . . . . . .. 19-24 Calibration Software For laboratory, office, and site calibration work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-32 Product Listings Complete listings of products and options.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-36 1 Contents Introduction About Time Electronics Established in 1967 Time Electronics Ltd is an international company that designs and manufactures calibration and metrology instrumentation. We have a comprehensive range of test equipment for use in applications across various industries. Products include decade boxes, portable and benchtop calibrators, DMMs, and custom-made test benches. Time Electronics’ headquarters is based in Tonbridge, Kent, in the United Kingdom, situated 30 miles south of London and occupies 10,000 sq ft of factory and office space. Time Electronics also has sales offices in New York (USA), Dubai (UAE), and Moscow (Russia). During our 45 years of continuous development we have built strong business relationships and a wealth of engineering experience. We have a global distribution network, and are represented by companies with strong technical work staffs and highly skilled engineers. Quality is an integral part of our company philosophy. In addition to building accurate and durable products we provide extensive customer support. This has given us a valuable reputation with organisations worldwide and is one reason for our continued success in the trading market. Time Electronics is accredited to ISO 9001:2008. Examples of Time Electronics’ Industry Coverage: Aerospace Power Generation Transport Refineries Petrochemical Manufacturing Chemical Military/Defence Pharmaceuticals Nuclear Aeronautics Shipping Telecommunications Automotive Metrology Education Medical Research/Development Process Control Automation Company Details: Time Electronics Limited, Unit 11 Sovereign Way, Tonbridge, Kent TN9 1RH. United Kingdom. Tel: +44 (0)1732 355993 Fax: +44 (0)1732 770312 Email: [email protected] Website: www.timeelectronics.com Introduction 2 Decade Boxes Resistance, Capacitance, and Inductance 1051 – 8 Decade Low Ohm Resistance Box Range / Resolution:.............................................................. 0 to 1MΩ / 0.01Ω steps Decade 0.01Ω 0.1Ω 1Ω 10Ω 100Ω 1kΩ 10kΩ 100kΩ Accuracy ± 10% ± 5% ± 1% ± 0.5% ± 0.1% ± 0.1% ± 0.1% ± 0.1% Max Current 1A 1A 1A 0.3A 0.1A 33mA 10mA 3mA Residual Resistance:........................................................................Less than 90mΩ Power Rating:..................................................................................1 watt per resistor Voltage Rating:..............................................................Maximum 250V DC/AC RMS Temperature Coefficient:..........................................................................50ppm /ºC Dimensions / Weight:.............. W215 x H100 x D120mm / 1kg (incl. protective boot) Features: ............Colour coded digits, safety terminals, and protective rubber boot 1040 – 8 Decade Wide Range Resistance Box Range / Resolution:............................................................... 0 to 100MΩ / 1Ω steps Decade 1Ω 10Ω 100Ω 1kΩ 10kΩ 100kΩ 1MΩ 10MΩ Accuracy ± 1% ± 0.5% ± 0.1% ± 0.1% ± 0.1% ± 0.1% ± 0.1% ± 1% Max Current 0.5A 0.3A 100mA 30mA 3mA 0.3mA 30μA 3μA Residual Resistance:..................................................................... Less than 250mΩ Power Rating:..................................................................................1 watt per resistor Voltage Rating:..............................................................Maximum 250V DC/AC RMS Temperature Coefficient:..........................................................................50ppm /ºC Dimensions / Weight:.............. W215 x H100 x D120mm / 1kg (incl. protective boot) Features: ............Colour coded digits, safety terminals, and protective rubber boot 1041 – 5 Decade Low Ohm Resistance Box Range / Resolution:............................................................... 0 to 1kΩ / 0.01Ω steps Decade 0.01Ω 0.1Ω 1Ω 10Ω 100Ω Accuracy ± 10% ± 5% ± 1% ± 0.5% ± 0.1% Max Current 1A 1A 1A 0.3A 0.1A Residual Resistance:........................................................................Less than 60mΩ Power Rating:..................................................................................1 watt per resistor Voltage Rating:..............................................................Maximum 100V DC/AC RMS Temperature Coefficient:..........................................................................50ppm /ºC Dimensions / Weight:.............. W215 x H100 x D120mm / 1kg (incl. protective boot) Features: ............Colour coded digits, safety terminals, and protective rubber boot 1061 – 6 Decade Resistance Box Range / Resolution:................................................................ 0 to 1.2MΩ / 1Ω steps Accuracy:............................................................................................................ ± 1% Residual Resistance:..................................................................... Less than 150mΩ Power Rating:............................................................................ 0.75 watt per resistor Voltage Rating:..............................................................Maximum 300V DC/AC RMS Dimensions / Weight:.................................................W355 x H63 x D82mm / 0.75kg Features: ....................................... Slim line design and front panel safety terminals 3 Decade Boxes www.timeelectronics.com 1067 – 6 Decade Precision Resistance Box Range / Resolution:............................................................. 0 to 12kΩ / 10mΩ steps Accuracy:....................................................................................................... ± 0.01% Residual Resistance:............................. Less than 10mΩ. Less than 1mΩ variation Power Rating:............................................................................ 0.35 watt per resistor Stability:.....................................................20ppm/year (>1Ω), 100ppm/year (<1Ω) Voltage Rating: .............................................................Maximum 200V DC/AC RMS Insulation: ................................. Case to resistance terminals 2kV / 50Hz maximum Temperature Coefficient: ...................................10ppm / ºC (20ppm / ºC below 1Ω) Dimensions / Weight: ..................................................W355 x H63 x D89mm / 1.1kg Contacts: .................................................................. Make before break – silver alloy 1065 – 6 Decade Power Resistance Box Range / Resolution:............................................................. 0 to 120kΩ / 0.1Ω steps Accuracy:............................................................. ± 5% (0.1Ω), ± 1% (1Ω to 120kΩ) Residual Resistance:........................................................................Less than 20mΩ Power Rating:............................................................................... 10 watt per resistor Voltage Rating:..............................................................Maximum 500V DC/AC RMS Temperature Coefficient:........................................................................200ppm / ºC Dimensions / Weight:....................................................W390 x H80 x D150mm / 2kg Features: .............................................Ventilated robust metal case and multi-wafer .................................................................. switches for low switch contact resistance 1070 – 5 Decade Capacitance Box 1071 – 7 Decade Capacitance Box 1070 Range / Resolution:....................................................0 to 10μF / 100pF steps 1070 Residual Capacitance:............................................................. Less than 38pF 1071 Range / Resolution:....................................................0 to 100μF / 10pF steps 1071 Residual Capacitance:............................................................. Less than 50pF Accuracy:....................................................................... 1% (5% above 10µF – 1071) Voltage Rating: ............................................................Maximum 300V DC, 200V AC Dimensions / Weight: ............. W215 x H100 x D120mm / 1kg (incl. protective boot) Features: ........................................................ Bi-polar working, colour coded digits, ............................................................... safety terminals, and protective rubber boot 1053 – 4 Decade Inductance Box Range / Resolution:..................................................................0 to 10H / 1mH steps Accuracy at 1kHz:.................................................................................. 3% of setting Voltage Rating:.............................................................................. Maximum 30V AC Maximum Current:........................................................................................... 150mA Residual Resistance:..........................................................................Less than 0.2Ω Residual Inductance:........................................................................... Less than 1µH Dimensions / Weight: ................................................W248 x H62 x D102mm / 0.8kg Features: .................................. Robust metal case and front panel safety terminals Decade Boxes 4 Voltage and Current Test Equipment Handheld and transportable Calibrators, Simulators, and Sources 1006 DC Millivolt Source 1007 DC Millivolt Potentiometer and Calibrator High accuracy handheld millivolt sources primarily used for voltage injection or potentiometric voltage measurement (1007). Applications include thermocouple simulation and calibration of A/D converters and chart recorders. • 3 ranges up to 1V • Safety terminals • Accuracy 0.02% of setting + 0.02% of rng• Removable protective boot • 20mA output current • Powered by 6 x AA batteries • Best resolution 1µV • 100 hours typical battery life • Short circuit and overload protected • Optional carry case • LED null measuring facility (1007) • H215 x W100 x D120mm, weight 1.2kg 1010 DC Voltage Calibrator A highly stable and accurate calibrator designed for applications requiring a precision voltage source of low internal resistance. Suitable for calibration, linearity, and gains stability measurements on DC amplifiers, voltmeters, data loggers, and chart recorders. • 0.01µV to 10V in 5 ranges • Accuracy 0.02% of setting • 10ppm/hr stability • 30mA output current • Safety terminals • Battery or mains operation • 40 hours typical use between charges • Battery level indicator • Optional carry case • W217 x H160 x D193mm, weight 3.3kg 1024 DC Current Calibrator A portable benchtop DC current source for calibration and test applications from nanoamp levels to 100mA. Applications include current transducer testing and calibration and linearity tests on digital and electronic current meters. • 0 to100mA output in 5 ranges • Accuracy 0.02% of setting • 10ppm/hr stability • 30ppm/°C temperature coefficient • Up to 15V output drive • Null meter measures to 1µA resolution • Safety terminals • Battery or mains operation • 12 hours typical use between charges • Battery level indicator • Optional carry case • W217 x H160 x D193mm, weight 3.3kg 1021 Milliamp Source with Null Indicator A precision DC current source suitable for calibration and test applications from micro-amp levels up to 100mA. The 1021 is used to calibrate current sensitive transducers and their associated indicating and recording instruments. • 0 to 100mA output in 3 ranges • Safety terminals • Accuracy 0.02% of setting + 0.02% of rng• Removable protective boot • 25ppm/hr stability • 10 hours typical use between charges • Up to 40V output drive • Battery charger supplied • LED null measuring facility • Optional carry case • Short circuit overload protected • H215 x W100 x D120mm, weight 1.4kg 5 Voltage and Current Test Equipment www.timeelectronics.com 1077 Milliamp Transducer Simulator A multi-purpose handheld test instrument that can be used as an adjustable current load, adjustable power supply, or precision current source. The 1077 is commonly used for the testing and simulation of milliamp transducer systems. • 3 operating modes • Safety terminals • Accuracy 0.02% of setting + 0.02% of rng• Removable protective boot • 100mA source and load in 3 ranges • 10 hours typical use between charges • 24V line mode • Battery charger supplied • Variable drive source 14 to 40V • Optional carry case • Short circuit and overload protected • H215 x W100 x D120mm, weight 1.5kg 1017 Voltage/Current/Resistance Calibrator A portable multifunction calibrator with voltage, current, and resistance ranges. The 1017 is suitable for calibrating a wide range of instruments including thermocouples, transducers, transmitters, and platinum resistance thermometers. • DC Voltage 10nV to 100V • Stability <5ppm/day, <25ppm/yr • DC Current 100nA to 100mA • Residual resistance <200mΩ • Resistance 10mΩ to 10kΩ • Deviation control – Voltage and Current • Accuracy 0.005% of setting + 0.002% of rng• Battery or mains operation • 1ppm setting resolution • 12 hours typical use between charges • Noise <2ppm (0.1 to 1Hz) • W250 x H119 x D314mm, weight 2.4kg 1030 Voltage/Current Source A simple operation pocket-sized calibrator suitable for voltage and current loop signal simulation as well as thermocouple simulation. A cost-effective and popular instrument used in various applications across industries. • 10mV, 100mV, 1V ranges • 10mA, 100mA ranges • Accuracy 0.1% of range • Linearity 0.15% • Up to 8V output (using 1kΩ resistor) • Precision 10-turn dial • 1kΩ resistor supplied • Battery powered 9V PP3 • 60 hours typical battery life • Supplied with carry case • H115 x W62 x D55mm, weight 0.24kg 1044 Voltage/Current Calibrator A precision handheld calibrator that can be used as a general purpose current and voltage source. High performance and ease of use make it suitable for test engineers, R&D, service, and calibration technicians. • Measure voltage and current • Source voltage and current • 3 voltage ranges 0 to 20V • 3 current ranges 0 to 20mA • Accuracy 0.05% of range • 4.5 digit LCD display • Battery powered 9V PP3 • 28 hours typical battery life • Optional mains power supply • Supplied with carry case • H142 x W78 x D50mm, weight 0.30kg • Voltage/Current/Loop version 1048 Voltage and Current Test Equipment 6 Loop & Temperature Calibration Instruments Handheld Loop Calibrators, RTD and Thermocouple Calibrators 1048 Voltage/Current/Loop Calibrator A compact voltage, current, and process loop calibrator for engineering, manufacturing, test, and process control applications. The 1048 combines digital accuracy with simple analogue control and is well suited to plant operations such as powering control loops. • Source/measure voltage and current • 3 source ranges: 0 to 22mA and 0 to 22V • 3 measure ranges: 0 to 70mA and 0 to 50V • Accuracy 0.02% of range • Transmitter simulator/sink loop control • Output steps and ramps • Fine adjustment (inching) • Battery powered 9V PP3, 20 hours typical use • H142 x W78 x D50mm, weight 0.34kg 7005 Voltage/Current/Loop Calibrator A handheld instrument for the calibration and simulation of voltage and current loops. The 7005 is a high accuracy compact calibrator with source and measure capabilities. • Current measurement: 125mA, source 50mA. Resolution 1μA • Voltage measurement: 25V, source 21V. Resolution 1mV • Accuracy: Source 0.01% of setting. Measure 0.01% of reading • Transmitter and square root functions • Auto-ranging feature • Programmable steps and ramp • 9 hours typical use between charges • Supplied with battery charger and carry case • H165 x W90 x D45mm, weight 0.42kg 7006 Loop-Mate 1: Loop Simulator and Source A cost-effective handheld loop simulator that provides 4 to 20mA or 0 to 10V loop signals. Features include manual and automatic step modes with audible indication that changes pitch as the output increases/decreases. • 4 to 20mA or 0 to 10V ranges • Set-points: 0, 10, 25, 50, 75, 90, 100% of range • Accuracy 0.1% of range • TxSim or RxTest modes • Internal loop supply, 25mA maximum • Auto-stepping mode: up/down/up, 0.5, 1, 2, 4, or 8 sec/step • Battery powered 9V PP3, 40 hours typical use • Supplied with carry case • H140 x W65 x D30mm, weight 0.18kg 7007 Loop-Mate 2: Loop Signal Indicator A simple operation portable loop signal indicator with LCD display. Suitable for use with the 7006 Loop-Mate 1. • 4 to 20mA, 0 to 10V, 0 to 50V ranges • LCD 4 digit display, mA, V, or % of range • Accuracy 0.05% of reading • RxSim, TxTest, or 50mA/50V measure modes • Internal loop supply, 25mA maximum • Battery powered 9V PP3, 40 hours typical use • Supplied with carry case • H140 x W65 x D30mm, weight 0.20kg 7 Loop and Temperature Calibration Instruments www.timeelectronics.com 1049 PT100 Simulator A handheld precision simulator for PT100 0.3850 platinum resistance elements used for accurate temperature measurement. High performance metal film resistors are used throughout which ensures a good temperature coefficient and long term stability. • -200°C to +800°C with 23 set points • Accuracy ± 0.3°C • Less than 30ppm/ °C temperature coefficient • ITS-90 IEC60751 • Exceeds class A • Passive resistance source • Supplied with carry case • H112 x W61 x D55mm, weight 0.17kg • °F version available – 1050 (-100°F to 1000°F, ± 0.5°F accuracy) 7000 RTD Temperature Calibrator A portable process control instrument that combines a precision digital thermometer (using RTD probes) with an RTD/ohms calibrator. • Temperature – Accuracy 0.05°C (0.09°F). Resolution 0.01°C (0.02°F) • Resistance – Accuracy 0.03Ω. Resolution 0.01Ω • 2, 3, and 4 wire connections • Measure and simulate °C, °F, °K, and ohms • Ramp and step • PT100 plus 7 other RTD types • User programmable • 24 hours typical use between charges • Supplied with battery charger and carry case • H165 x W90 x D45mm, weight 0.42kg 1090 Process and Temperature Calibrator A portable, key-press operation instrument that combines source and measurement functions for thermocouples, RTDs, mV and mA. The 1090 features a memory storage function that holds frequently used values. • Measures/simulates 8 thermocouple types, PT100 -RTD, mV and mA • Displays units in °C, °F, μV/mV, or mA • Accuracy: Source 0.02% of range, 0.5°C. Measure 0.05% of range, 0.7°C • Automatic or manual cold junction compensation • Inching and step functions with time configurable steps • Process loops 4 to 20mA and 0 to 50mA • Mains or battery operation, 60 hours typical use between charges • Supplied with battery charger and carry case • H235 x W150 x D75mm, weight 1.2kg 7050 Process and Thermocouple Calibrator A process calibrator that combines the essential functions of measurement and simulation of volts, millivolts, milliamps, and ohms with the direct readout simulation of thermocouples and RTDs in °C or °F units. • Measure (3 ranges) up to 40V, 400mA, 40kΩ • Output voltage (3 ranges) up to 10V, 1μV resolution • Output current (3 ranges) up to 20mA, 1μA resolution • Output Resistance (3 ranges) up to 40kΩ, 0.01Ω resolution • Accuracy: Source and measure 0.03% of range • Thermocouple measure and simulate: J, K, T, E, R, S, B, N • RTD measure and simulate: PT100 • Battery or mains operation • W270 x H175 x D250mm, weight 4.5kg Loop and Temperature Calibration Instruments 8 Pressure Calibration Instruments Portable Pressure Calibrators and Test Pumps 7090 Pneumatic Calibration Pump 7095 Hydraulic Calibration Pump Pneumatic and hydraulic calibration pumps that combine high performance with durability. Features include contoured cushioned handles for comfort and dual o-rings on all pistons to ensure zero leakage. • 7090 – Pneumatic pressure to 40bar, Vacuum to -950mbar • 7095 – Hydraulic pressure to 700bar • Non-oil based lubricant used on all moving parts • Both supplied as kits with carry case, hoses, and fittings • 7090 – H200 x W125mm, weight 0.91kg • 7095 – H240 x W125mm, weight 1.4kg • Digital pressure gauges available (7091 and 7096) 7193 / 7194 / 7195 Benchtop Pressure Calibration Pumps Benchtop pumps that are a comfortable and simple operation, providing an easy way to generate pressure in the lab. Each pump is a dual pressure source enabling them to be used as comparators for calibration with accompanying reference gauge. • 7193 Pneumatic Pump – 0.95bar vacuum to 40bar pressure • 7194 Pneumatic Pump – 0.95bar vacuum to 100bar pressure • 7195 Hydraulic Pump – 0.9bar vacuum to 600bar pressure • Easy to use with smooth pressure generation and high pressure stability • Dual pressure source (double output manifold) • Fine pressure adjustment • 7193 – W198 x H140 x D315mm, weight 2.7kg • 7194 – W270 x H178 x D450mm, weight 7.5kg • 7195 – W198 x H135 x D290mm, weight 3.2kg 7089 / 7091 / 7094 / 7096 Digital Pressure Gauges Digital pressure gauges that provide high accuracy, resolution and stability. Robust design and simple operation make these gauges ideal for a wide range of applications. • 7089 – Vacuum only, accuracy 0.2% of FS • 7091 – Vacuum to 40bar, accuracy 0.2% of FS (suitable for the 7090 and 7193) • 7094 – 0 to 100bar, accuracy 0.2% of FS (suitable for the 7194) • 7096 – 0 to 700bar, accuracy 0.2% of FS (suitable for the 7095 and 7195) • Easy-to-read display with 5 digit resolution • Unique self-protection capability technology • 3 times per second measure speed • Fully temperature compensated accuracy • RS-232 connection on rear of gauge, EasyCal compatible • H178 x W112 x D45mm, weight 0.6kg 7078 Auto-Ranging Digital Pressure Gauge A high performance digital pressure gauge that has the ability to auto-range and maintain a 0.1% of reading accuracy from vacuum to 200bar. The 7078 eliminates the need for multiple gauges to span many different ranges, solving the problem of over ranging errors. • Vacuum to 200bar (3000psi) • 0.1% of reading accuracy • 9 engineering units – bar, psi, Hg, kPa, inHg, inH20, Kg/cm2, mmHg, mbar • High accuracy silicone piezo resistive sensors • Reads both gauge and absolute pressure • Easy to read colour display with full 2 line alphanumerics • Compact and robust with protective rubber housing • H165 x W115 x D55mm, weight 0.88kg 9 Pressure Calibration Instruments www.timeelectronics.com 7040 Digital Pressure/Current Calibrator A versatile calibrator that combines a digital pressure gauge and current indicator. Suitable for pressure testing and maintenance as well as process loop applications. • 0.2, 2, 5, 10, or 20bar versions (vacuum available on 2bar model) • Pressure/vacuum calibration, 0.04% accuracy • Loop current calibration (displayed in mA, or % of range, 4 to 20mA) • 9 engineering units – bar, psi, KPa, inWg, cmWg, inHg, mmHg, Kg/cm2, Atm • Minimum/Maximum logging and leak rate functions • 4.5 digit display • RS-232 serial interface and EasyCal software compatible • Battery powered 9V PP3, 50 hours typical use • Supplied with carry case, fittings kit and hose, test lead, and RS-232 cable • H157 x W90 x D33mm, weight 0.29kg 7010 Single Channel Pressure Calibrator 7015 Dual Channel Pressure Calibrator Portable battery or mains powered pressure calibrators designed for both lab and field applications. • Vacuum, 0.2, 2, 5, 10, 20, 35, 70, 100, 200, 400, or 600bar versions • Best accuracy 0.04% of full scale • Pneumatic or hydraulic • 4 selectable pressure units (4 per channel on 7015) and mA • Loop current measure • 24/36V loop power • Over-pressure alarm • RS-232 serial interface and EasyCal software compatible • W270 x H175 x D250mm, weight 3kg 7016 Regulated Low Pressure Calibrator 7018 Differential Pressure Calibrator Portable pressure calibrators that are rugged design and simple operation. Suitable for pneumatic field instrumentation. • 7016 – Regulated low pressure: Vacuum, 0.2, 2, 5, 10, or 20bar versions • 7018 – Differential pressure: Vacuum, 0.2, 2, 5, 10bar versions • Pneumatic with 0.04% of full scale best accuracy • 4 selectable pressure units and mA • Loop current measure • 24/36V loop power • Over-pressure alarm • RS-232 serial interface and EasyCal software compatible • W270 x H175 x D250mm, weight 3kg 7198 Pressure Calibration Accessories Kit A comprehensive set of pressure accessories to accompany pumps, gauges, and calibrators. The 7198 kit includes adaptors, fittings, connectors, and hoses to provide a quick solution to pressure component requirement in both the field and laboratory. • Adaptors for metric, BSP parallel, taper threads, and NPT (male and female) • Coupling connectors included allow any two adaptors to be connected together • ¼ BSP G hose fittings for pushfit 4mm and 6mm external diameter hose • Quick release couplings and barbed 6mm and 8mm internal diameter hose • Nylon hose set with quick release connectors for low pressure connections • Additional 4mm and 6mm nylon hoses to build up custom lengths as required • Minimess 1620 test point adaptors and micro bore hose for high pressure • 10” adjustable spanner and PTFE tape • Kit supplied in adaptor case and hose bag Pressure Calibration Instruments 10 Electrical Test Calibrators Instruments for rapid calibration of electrical test equipment 5068 Insulation Tester/ Megohmmeter Calibrator A precision instrument for calibrating general purpose insulation testers and megohmmeters with test voltages up to 2.5kV. Rugged, compact, and portable it is ideal for site calibration. • Insulation resistance from 100kΩ to 10GΩ • Low ohm verification at 1Ω, 10Ω, 100Ω, 1kΩ • Accuracy: Resistance 1% of setting. Voltage and Current to 1% of reading • Up to 2.5kV operation • Battery operation (over 150 hours between charges) • Continuous connection – no arcing • Fully shrouded safety connectors • Display of open circuit voltage (0 to 1.999kV or 0 to 2.50kV) • Display of short circuit current (0 to 2mA or 0 to 20mA) • W270 x H175 x D250mm, weight 2.1kg 5069 Insulation Tester/ Megohmmeter Calibrator A high accuracy calibrator for insulation testers and megohmmeters with test voltages up to 10kV. Sturdy and transportable it is suitable for both lab and site calibration. • Insulation resistance from 100kΩ to 100GΩ • Accuracy: Resistance 1% of setting. Voltage and Current to 1% of reading • Up to 10kV operation • Battery operation (over 150 hours between charges) • Continuous connection – no arcing • Fully shrouded safety connectors • Display of open circuit voltage (0 to 2kV or 0 to 9kV) • Display of short circuit current (0 to 2mA or 0 to 20mA) • W406 x H175 x D330mm, weight 4.4kg 5070 Ductor Tester/ Micro-Ohmmeter Calibrator The DuctorCal is a portable instrument suitable for calibrating high current ductor testers and micro-ohmmeters. It contains 5 sets of high current rating standard resistors that simulate the resistance being measured. • Calibrate ductor testers and micro-ohmmeters • 0.2, 2, 20, 200, 2000mΩ ranges • Accuracy/rng: 0.2mΩ (0.8%), 2mΩ (0.5%), 20mΩ (0.2%), 200 & 2000mΩ (0.1%) • 5 point calibration: 0, 25, 50, 75, 100% • Gold plated terminals • Low thermal EMF connection • Portable robust carrying case • W540 x H210 x D410mm, weight 11kg 5080 Portable Appliance Tester Calibrator Designed to provide rapid high accuracy calibration of portable appliance testers and insulation/continuity testers. The 5080 has calibration functions for earth bond, insulation, leakage, touch leakage, and load test. • Earth bond range 18Ω to 20mΩ • Earth bond currents up to 50A AC • Load test currents up to 13A AC • Accuracy: Resistance 1% of setting. Voltage and Current to 0.25% of reading • Voltage and current displayed on integral LCD display • Safety interlock feature • Portable robust carrying case • Battery powered (over 200 hours between charges) • W406 x H175 x D330mm, weight 5.5kg 11 Electrical Test Calibrators www.timeelectronics.com 5030 Electrical Tester Calibrator • RCD 3mA to 2500mA, 10ms to 2000ms • Loop 50mΩ to 1.8kΩ • Insulation up to 2GΩ / 1kV • Continuity 0.1Ω to 10kΩ • RS-232 / USB Control • Fast and intuitive user interface • PC/laptop control via EasyCal software • W 430 x H155 x D 255mm, weight 8kg A precision instrument designed to calibrate RCD, loop, insulation, earth testers and multifunction installation testers. The 5030 accurately simulates RCD trip times and measures currents produced by RCD testers. It replicates loop impedance and auto adjusts for local line impedance. It also provides insulation resistances and measures test voltages and currents. Function Range / Values Resolution Accuracy Loop Impedance Resistor Values 1800, 330.0, 180.0, 33.00, 18.00, 3.300, 1.800, 0.330, 0.150 & 0.050Ω 4 digit ±0.5% of displayed value ± 10mΩ Test Current 40A max (200ms) / 50W max Local Loop Compensation 0 to 9.99Ω 0.001Ω ±0.5% of value ± 10mΩ 1ms ±0.1ms 4 digit ±0.5% of rdg, ±1% of rdg with x5 multiplier Loop RCD Trip Time Current Additional Specifications 10, 20, 30, 40, 50, 60, 80, 100, 300, 500, 1000, 1500, 2000ms (Fully variable from via remote commands - EasyCal software) 6.000, 10.00, 30.00, 100.0, 300.0, 500.0, 1000mA Current Multipliers: x0.5, x1, x2, x5 • Maximum Current: 2500mA • Waveforms: AC, DC & half wave rectified Phase detection: 0° or 180° • Pre Trigger Delay: 0 to 2000ms • Pre Trigger Threshold: 0 to 100% of nominal current Insulation Resistance 1MΩ to 2000MΩ 1MΩ 50kΩ to 1990kΩ 50kΩ 1% of value 1% of value 50.0 to 99.9V DC 0.1V 1% of reading Test Voltage Measurement @ 0.5mA or 1.0mA Load 1000 to 1200V DC 1V 1% of reading Short Circuit Current 0.00 to 300.00mA DC 0.01mA 1% of range Continuity Resistance Test Voltage Measurement (input resistance 10MΩ) Test Current Measurement (between 0.1Ω and 100Ω) Power Dissipation 0.1Ω to 100.0Ω 0.1Ω 1% of value 250Ω, 500Ω, 1.00kΩ, 2.50kΩ, 5.00kΩ & 10.0kΩ 3 digit 1% of value 0.0 to 50.0V DC 0.1V 0.5% of range 0 to 400mA DC 1mA 0.5% of range 1 watt maximum – – Voltage Line Voltage Measurement 200 to 260V RMS 0.1V 0.5% of reading Line Frequency Measurement 45 to 65Hz 0.01Hz 0.1% of reading 5030 Electrical Tester Calibrator 12 Multifunction Calibrators Precision calibration for wide workload coverage 5025 Multifunction Calibrator • 0 to 1050V AC/DC voltage • 0 to 22A AC/DC current • 1Ω to 1GΩ resistance • Thermocouple simulation • Digital frequency • Oscilloscope calibration • PT100 simulation • Capacitance and inductance • Power calibration • Clamp meter calibration • GPIB / RS-232 / USB Interfaces Calibrates Digital/Analog Multimeters Ohmmeters Clamp Meters Oscilloscopes Handheld/Bench DMMs AC/DC Millivoltmeters Temperature Indicators Resistance Boxes Frequency Meters Thermocouple Indicators Timer Counters Data Loggers And more Multi Instrument Calibration Simple Operation The 5025 is a high performance multi-product calibrator that provides the foundation for cost-effective calibration. Built for versatility and simplicity it offers a solution to efficient calibration of a wide range of test and measurement equipment. Functions and ranges are easily accessed from the front panel. Increase and decrease keys per digit, are used to quickly set the output value. Deviation control then enables the user to finely adjust the output value as a percentage (+/-9.999%). All this information is shown on a clear, easy to read LED display. Standard features include AC/DC voltage and current, digital frequency, decade resistance, conductance, and thermocouple simulation. Options include capacitance and inductance, wideband AC voltage, full range resistance (incorporating PT100 simulation), power calibration, and oscilloscope calibration. External adaptors are available for clamp meter and optical tachometer calibration, and a power amplifier for demanding analogue instruments. 13 Calibration Made Easy Connect the 5025 to a PC/Laptop installed with Time Electronics’ EasyCal software and automate the calibration process. Increase speed of calibration and consistency of results, produce calibration certificates and reports to industry quality standards. 5025 Multifunction Calibrator www.timeelectronics.com 5025 Specifications Function Range / Values Best 1 year Specification Voltage DC 0 to ± 1050V ± 15ppm of setting Current DC 0 to ± 22A ± 80ppm of setting Voltage AC 1mV to 1050V (10Hz to 20kHz, sine-wave) ± 300ppm of setting Option 9771: Wideband AC Voltage 20 to 200mV/300kHz. 0.2 to 2V/1MHz. 2 to 20V/100kHz ± 0.05% of setting Current AC 10μA to 22A (20Hz to 1kHz, sine-wave) ± 0.05% of setting Option 9780: Clamp Meter Adaptor AC/DC Current up to 1100A (DC, 45 to 90Hz) ± 0.5% Option 9798: Capacitance 1nF, 10nF, 100nF, 1μF, 10μF, 100μF (100V max) ± 0.25% of setting Option 9798: Inductance 1mH, 1.9mH, 5mH, 10mH, 19mH, 50mH, 100mH, 190mH, 500mH, 1H, 10H ± 0.1% of setting Resistance 1Ω to 1GΩ (Fixed values, decade steps) ± 20ppm of setting Option 9774: Simulated Resistance 10Ω to 40MΩ (variable) ±0.02% of setting Option 9787: Full Range Resistance PT100 Simulation 1Ω to 120MΩ (variable) -180 to 850°C ± 100ppm of setting ± 0.2°C Conductance 1s to 1ns (fixed values, decade steps) ± 20ppm of setting Thermocouple Simulation -270 to 1800°C. Type J, K, R, T, S, B, E, N ± 0.15°C Digital Frequency/Period 0.1Hz to 10MHz / 100ns to 10s ± 20ppm of setting Amplitude 0mV to 200V and 0mV to 2V 50Ω (Square-wave or DC) ± 0.05% Frequency/Period 0.1Hz to 100MHz / 100ns to 10s ± 20ppm (± 0.1ppm with option 9783) Duty Cycle 3 frequencies: 100Hz, 1kHz, 10kHz, settable from 0 to 100% – Fast-Rise < 850ps. Bandwidth checking up to 400MHz – Option 9769: 2.2GHz Sweep 100MHz to 2.2GHz levelled sine-wave (0.5, 1, 1.5V pk-pk) Amplitude ± 1%, Frequency ± 20ppm Power 22A, 1050V, 23kW, 45 to 400Hz ACV: 0.03%, DCV: 0.01%. ACI: 0.1%, DCI: 0.03% Phase/Power Factor ± 90°/ 0.00 to 1.00PF ± 0.3° Option 9770: Oscilloscope Calibration Option 9797: Power Calibration Options (specifications for 9771 / 9774 / 9780 / 9798 / 9787 / 9770 / 9769 / 9783 / 9797 shown above) Internal Calibrator Options 9771: Wideband AC Voltage • 9774: Simulated Resistance • 9787: Full Range Resistance 9798: Capacitance and Inductance • 9770: Oscilloscope Calibration • 9797: Power Calibration Oscilloscope Calibration Options (option 9770 must be fitted) 9769: Internal Scope 2.2GHz Levelled Sine Generator • 9783: Internal Oven-Controlled High Stability Frequency Reference 9762: External Rubidium High Stability Frequency Reference • 9764: External Current Probe Calibration Adaptor External Adaptors/Instruments 9780: Clamp Meter Adaptor (1 & 50 turn coil) • 9773: Optical Tacho Adaptor • 9790: 100 Amp AC Current Transformer 9760: Power Amplifier (60V AC, 90V DC - 100mA) • 9766: Low Noise Attenuator (1000:1) • 9767: Low Noise Attenuator (100:1) Accessories and Calibration Certificates 9085: Soft Carry Case • 9728: 19” Universal Rack Mount Kit • 9796: Premium Test Lead Set C159: Factory Certificate (NPL traceable) • C103: UKAS Certificate • C113: Extended UKAS Certificate EasyCal Software ECFLA: EasyCal Full License • 9777: Bar Code Reader • 9779: Job and Address Label Printer EC2FL/EC2CL/EC2WL: Additional User Licenses • EAD: EasyAdmin Add-On • EWC: WebCerts • CREP: Crystal Reports Software General Specifications Warm up Settling Time Temperature Performance Operating Humidity / Altitude 30 minutes to full accuracy Less than 5 seconds Operating: 5 to 45°C. Calibration: 15 to 28°C. Storage: -10 to 50°C < 80% non condensing. Altitude: 0 to 3km. Non operating: 3km to 12km Line Power 100 to 230V AC 50/60Hz. 200W maximum Interfaces RS-232, USB, and GPIB Dimensions / Weight W455mm, H155mm, D480mm. Weight: 16.5kg 5025 Multifunction Calibrator 14 Multifunction Calibrators Precision calibration for wide workload coverage 5051Plus Multifunction Calibration System • Integral Calibrator, DMM, and PC • Source up to 1050V AC/DC voltage • Source up to 22A AC/DC current • Source up to 1GΩ resistance • Thermocouple simulate and measure • PT100 simulate and measure • Source capacitance and inductance • Oscilloscope calibration • Clamp meter adaptor included • EasyCal calibration software included Calibrates Digital/Analog Multimeters R-C-L meters Clamp Meters Oscilloscopes Transducers & Transmitters Process Calibrators Temperature Simulators Decade Boxes Frequency Meters Temperature Indicators Voltage & Current Sources Data Loggers And more Calibrator / DMM / Touch Screen PC Compact System For The Calibration Process The 5051 Plus Calibration System combines a high accuracy calibration source with a precision digital multimeter. Designed for a wide workload the 5051 calibrates both traditional and new test equipment quickly and accurately. The 5051 control software allows the operator to easily select the wide range of functions using mouse, keyboard, or touch screen. The 5051 Plus is an inclusive package with features to cover and optimise the entire calibration process. By integrating the calibrator, DMM and PC in one unit minimal bench space is used. This also makes the 5051 ideal for site work with carry case supplied as standard. Standard internal features include AC/DC voltage/current, resistance, frequency, thermocouple/PT100 simulation and measure, capacitance/ inductance calibration, and oscilloscope calibration. Also supplied is a clamp meter adaptor for clamp calibration up to 1100A, and test lead set to provide the neccessary connections for nearly all applications. 15 The internal PC is preloaded with the EasyCal software suite, enabling automatic calibration to increase speed and efficiency of work. In addition EasyCal has features to manage and administrate both inventory and quality control. As a complete workstation the 5051 Plus is supplied with printer and connectivity kit for producing certificates and reports. 5051Plus Multifunction Calibration System www.timeelectronics.com 5051Plus Specifications Function Range / Values Best 1 year Specification Voltage DC 0 to ± 1050V ± 15ppm of setting Current DC 0 to ± 22A ± 80ppm of setting Voltage AC – Wideband AC Voltage 1mV to 1050V (10Hz to 20kHz, sine-wave) 20 to 200mV/300kHz. 0.2 to 2V/1MHz. 2 to 20V/100kHz ± 300ppm of setting ± 0.05% ± 0.05% Calibrator (source) Current AC 10μA to 22A (20Hz to 1kHz, sine-wave) Clamp Meter Adaptor x50 turn AC/DC Current up to 1100A (DC, 45 to 90Hz) ± 0.5% Capacitance 1nF, 10nF, 100nF, 1μF, 10μF, 100μF (100V Max) ± 0.25% Inductance 1mH, 1.9mH, 5mH, 10mH, 19mH, 50mH, 100mH, 190mH, 500mH, 1H, 10H ± 0.1% Resistance 1Ω to 120MΩ Variable (plus 1GΩ fixed value) ± 100ppm of setting Conductance 1s to 1ns (fixed values, decade steps) ± 20ppm of setting Thermocouple Simulation -270 to 1800°C (type J, K, R, T, S, B, E, N) ± 0.15°C PT100 Simulation -180 to 850°C ± 0.2°C Oscilloscope Calibration Amplitude 0mV to 200V and 0mV to 2V 50Ω (Square-wave or DC) ± 0.05% Frequency/Period 0.1Hz to 100MHz / 100ns to 10s ± 20ppm (± 0.1ppm with option 9783) Duty Cycle 3 frequencies: 100Hz, 1kHz, 10kHz, settable from 0 to 100% – Fast-Rise < 850ps. Bandwidth checking up to 400MHz – Option 9769: 2.2GHz Sweep 100MHz to 2.2GHz levelled sine-wave (0.5, 1, 1.5V pk-pk) Amplitude ± 1%, Frequency ± 20ppm 6.5 Digit DMM (measure) Voltage DC 0 to 1000V 35ppm of rdg + 6ppm of rng Current DC 0 to 3A 500ppm of rdg + 50ppm of rng Voltage AC 0 to 750V 0.06% of rdg + 0.04% of rng Current AC 0 to 3A 0.1% of rdg + 0.04% of rng Resistance 0 to 100MΩ 100ppm of rdg + 50ppm of rng 0.01% of rdg Frequency 3Hz to 300kHz Thermocouple -270 to 1800°C (Type J, K, R, T, S, B, E, N) ± 0.5°C PT100 -180 to 850°C ± 0.08°C PC Specifications/Details Processor RAM Hard Drive Ports 2GHz 512MB 60GB solid state 4 x USB, 1 x Fast Ethernet Display 10.5” Touch Screen LCD Operating System Windows XP Embedded Included Software Programs Supplied Hardware/Accessories Calibrator and DMM control programs, EasyCal calibration software suite USB keyboard, Inkjet Printer, Cal and ID Label Printer, DVD-RW, 4 port USB hub, Numeric key pad, USB memory stick Options Oscilloscope Calibration Options 9769: Internal Scope 2.2GHz Levelled Sine Generator • 9783: Internal Oven-Controlled High Stability Frequency Reference 9762: External Rubidium High Stability Frequency Reference • 9764: External Current Probe Calibration Adaptor External Adaptors/Instruments 9773: Optical Tacho Adaptor • 9790: 100 Amp AC Current Transformer • 9760: Power Amplifier (60V AC, 90V DC - 100mA) 7042: Remote Pressure Module (Vac to 20 bar versions) • 5077: Power Calibrator • 7070/7071/7072: Dry Block Calibrators EasyCal Software Accessories and Calibration Certificates 9777: Bar Code Reader • 9779: Job and Address Label Printer • EC2FL/EC2CL/EC2WL: Additional User Licenses for separate PCs EAD: EasyAdmin Add-On • EWC: WebCerts Add-On • CREP: Crystal Reports Software • C134: UKAS Calibration Certificate General Specifications Supplied Items Warm up Settling Time Temperature Performance Operating Humidity / Altitude Line Power Dimensions / Weight Supplied Test Lead Set 5051PLUS Calibration System • Clamp Meter Adaptor • Premium Test lead Set • Soft Carry Case • Printer and Connectivity Kit Cal and ID Label Printer • 5051 Manual Control Software • EasyCal Calibration Software • Factory Calibration Certificate (NPL) 30 minutes to full accuracy Less than 5 seconds Operating: 5 to 45°C. Calibration: 15 to 28°C. Storage: -10 to 50°C < 80% non condensing. Altitude: 0 to 3km. Non operating: 3km to 12km 100 to 230V AC 50/60Hz. 200W maximum W430mm, H202mm, D538mm. Weight: 23kg High voltage (pair). High current (pair). Low thermal (pair). Shielded 4 wire. BNC test lead. BNC/thermocouple/spade adaptors. Test clips/couplers (pair). Wall mount lead holder. Carry case. 5051Plus Multifunction Calibration System 16 ATE/Bench Calibrators and Digital Multimeters Multi-purpose Calibrators and Benchtop DMMs 5011 Resistance/Temperature Calibrator A versatile, high accuracy calibrator that is primarily a programmable resistance/RTD source. Internal options such as DC voltage and thermocouple simulation, DC current, and 10MHz frequency can be added to increase capabilities. • 1Ω to 120MΩ, 100ppm basic accuracy • RTD simulation • Optional thermocouple simulation • 0 to 22V DC voltage option • 0 to 220mA DC current option • 10MHz frequency option • RS-232, GPIB, and USB interfaces • Front panel operation • PC/laptop control via EasyCal software • Rack mount kit option • W451 x H152 x D272mm, weight 7kg 5018 Programmable DC-AC V-I Calibrator A high precision calibration instrument that can be configured as a simple benchtop DC voltage calibrator or advanced AC/DC voltage and current source controlled via PC, performing any number of tasks as part of a complex ATE test rig. • 15ppm accuracy, 0.5ppm resolution • 1999999 full scale +10% over-range • 20mV-200mV-2V-20V DC voltage • Deviation control -9.999% to +9.999% • Ramping feature • RS-232, GPIB, and USB interfaces • Ideal for ATE applications • Front panel operation • PC/laptop control via EasyCal software • Rack mount kit option • W451 x H152 x D272mm, weight 8.2kg 5045 Oscilloscope Calibrator A high performance benchtop instrument for calibrating a wide range of oscilloscopes and frequency meters. It provides outputs for amplitude, frequency, period, duty cycle, and bandwidth. Frequencies are generated from an internal 0.1ppm temperature controlled oscillator. PC Virtual Control 17 • 10mV to 220V square wave/DC • Frequency 0.1Hz to 100MHz • Time marker/period 10s to 10ns • Fast rise <300ps • Bandwidth check up to 600MHz • Optional 2.2GHz levelled sweep • Rubidium frequency reference option • Front panel operation • Virtual PC calibrator control software supplied as standard • PC/laptop control via EasyCal software • W451 x H152 x D272mm, weight 8.2kg ATE/Bench Calibrators and Digital Multimeters www.timeelectronics.com 5077 Power Calibrator A high accuracy power calibrator suitable for calibrating watt-meters, power meters, and kW-Hr meters. Supplied with “Virtual Front Panel” software the user can control the 5077 remotely via laptop or PC. • Phase angle ± 90°, power factor 0.00 to 1.00 • 1mV to 1050V AC/DC • 0.02 to 22A AC/DC • 0 to 22kVA or 0 to 22kW • 100A AC current transformer option • 45 to 400Hz in 0.1Hz steps • Clamp meter adaptor option • RS-232, GPIB, and USB interfaces • Virtual PC calibrator control software supplied as standard • W455 x H155 x D480mm, weight 16.5kg PC Virtual Control 5065 Bench Digital Multimeter A versatile 6½ digit bench multimeter with 19 measurement functions. Low cost, easy to use, stability, and high accuracy make the 5065 an ideal DMM for a variety of applications. With a comprehensive range of features the 5065 is suitable for test engineers, R&D, service, and calibration technicians. • 6½ digit resolution • Accuracy 0.005% DC voltage • RS-232 and USB interfaces • Optional GPIB interface • Temperature measurements • SCPI command set • High sample rate • 10 channel scanner card option • PC/laptop control via EasyCal software • W210 x H85 x D350mm, weight 4.4kg 5075 Precision Digital Multimeter A benchtop digital multimeter that combines high performance with simple operation. The 5075 easily measures from nanovolts to 10kV, from picoamps to 30 amps, from micro-ohms up to 1GΩ, from picofarads to 300µF, with up to 7½ digit accuracy. • 7 digit resolution • 10nV to 10kV, 10pA to 30A • Resistance, capacitance, frequency • 18ppm accuracy/best 1 year • 10 channel low thermal emf scanner option • PC/laptop control via EasyCal software • GPIB interface (USB adaptor available) • Rack mount kit option • W423 x H89 x D415mm, weight 8.5kg ATE/Bench Calibrators and Digital Multimeters 18 Calibration Benches Comprehensive modular test benches and complete laboratory design About CalBench CalBench is the ultimate multifunction calibration station from Time Electronics. Each bench is custom-made to meet specific user requirements. Offering versatility and precision it is ideal for laboratories and workshops in need of multi-product testing that meets the highest industry standards. A wide range of modules can be fitted to the primary console creating a highly flexible system that is both functional and easy to use. Further expansion can be achieved by adding the secondary console, mounted under the primary. Calibration modules cover electronic signal, temperature, loop, and pressure applications. Power supplies, DMMs, oscilloscopes and generator modules can also be fitted into the bench consoles. Functions are clearly defined on each module and a competent technician will quickly master the operation of the system without training or constant reference to manuals. Various fittings, functions, and additional devices can be added to CalBench to create a comprehensive work environment. Calibrates Multimeters Loop Signal Indicators Temperature Indicators Pressure Transducers AC/DC Signal Sources Pressure Gauges Temperature Sensors Frequency Meters Signal Generators Clamp Meters RTD Transmitters Decade Boxes Oscilloscopes Tachometers Timer Counters Pressure Transmitters AC/DC Millivoltmeters Power Supplies Thermocouple Transmitters Ohmmeters And more 19 Calibration Benches www.timeelectronics.com Module Options and Extras Pressure: Precision calibrators, indicators, and controller modules. Ranges from vacuum to 600bar. Power Supplies: Fixed and adjustable AC and DC power supplies, dual and programmable units. Loop and Temperature: High accuracy loop calibrator modules with source, measure and sink functions. Temperature calibrators capable of measuring and simulating RTDs/thermocouples. Multifunction Calibrator and DMM Modules: The 7051 provides high accuracy multi-product calibration and has an internal 6½ digit multimeter. Also available are the 5065B (6½ digit) and 5075B (7½ digit) DMM modules. Additional Modules: Further modules include oscilloscopes, frequency counters, function generators, and harmonics analyzers. Custom design modules can be fitted allows the user to integrate a familiar instrument into their system. External Options: Pneumatic and hydraulic calibration pumps, pressure gauges, dead weight testers, dry block calibrators, pressure test kits, hoses and connectors, test lead sets, solder stations, vices, and much more. Bench Fittings: Various fittings can be added to CalBench to improve usability and create a more efficient workspace. Under-worktop drawers, cabinets, CPU holders, and keyboard trays; tool holders and hooks for the perforated back panel; air preparation kits, desktop mountable devices, and more. Laboratory Design and Supply: Time Electronics offers a turnkey laboratory design service for customers requiring a complete and efficient test facility. Using 3D software we create the layout then generate images and videos to visualise the concept. We supply all the necessary test equipment and surrounding laboratory furniture. 7051 Multifunction Calibrator and Control Centre Mounted centrally in the primary console the 7051 combines a precision multifunction calibrator, 6½ digit multimeter, and industrial touch screen PC. It is the principle module for on-site facilities that require high performance calibration and maximum functionality. Calibrator Provides a wide range of calibrated outputs for AC/DC voltage and current, RTD and thermocouple simulation, plus a range of resistance and frequency functions. Internal options can be added for increased capabilities. These include high voltage and current, capacitance and inductance, and oscilloscope calibration. Further enhancements can be made by additional side modules, adaptors, and benchtop instruments. DMM The integral 6½ digit multimeter can measure DC voltages to 1000V, AC voltages to 750V, resistance to 100MΩ, and frequency to 300kHz. PC The operating system is Windows XP embedded, running on a 2GHz PC which allows standard peripherals to be connected. The calibrator control software allows the wide range of functions to be easily selected using mouse, keyboard, or touch screen. EasyCal Software Enables automatic calibration to increase speed and efficiency of work. In addition EasyCal has features to manage and administrate both inventory and quality control. To complement the system a printer and connectivity kit is supplied as standard, for generation of certificates and reports. Communication Using EasyCal the operator can read back from compatible electrical, temperature, pressure, and loop modules within the bench. Furthermore the software can be used with external instruments such as dry block calibrators and portable test instruments. 7051Plus Package A comprehensive package including specific options to cover the calibration requirements for electrical and process applications. As a package it incorporates the full internal capabilities of the 7051, and is complemented by external adaptors for increased functionality. Features • 0 to 22V AC/DC, 0 to 220mA AC/DC • 0 to 1GΩ – decade steps • 10MHz frequency • Thermocouple simulation/measure 10 types • RTD simulation/measure • Internal 6½ digit multimeter • Simulated resistance 10Ω to 40MΩ • High voltage/current option – 1kV/22A AC/DC • Pressure calibration control software • HART/Fieldbus compatible • EasyCal calibration software • Touch screen Calibration Benches 20 Calibration Bench Modules Calibrators, power supplies, DMMs, oscilloscopes and more Power Supply Modules CalBench can be fitted with a number of power supply modules depending on user requirements. Modules include simple operation fixed DC and AC supplies and precision adjustable supplies. • 7083: Dual 24V DC power supply - 2 x 24v (2A) • 7087: Quad DC power supply - 6V(8A), 12V(8A), 24V(4A), 48V(3A) • 7052: 30V DC 3A adjustable power supply - Digital • 7053: 56V DC 4A precision Adjustable power supply - Digital • 7054: 120V DC 0.75A adjustable power supply - Digital • 7055: 250V DC 0.375A adjustable power supply - Digital • 7056: Dual adjustable power supply (2 x 30V DC 3A) - Digital • 7088: Adjustable AC power supply - 0 to 270V/10A (110% above line voltage) • 7047: Variable AC/DC power supply - AC 1000VA, DC 800W, Freq 40 - 500Hz Pressure Modules The Time Electronics range of pressure modules for CalBench include low and high pressure calibrators, indicators, and line controllers. • 7059: Combined vacuum and pressure calibrator (vacuum plus ranges to 20bar) • 7062: Pressure calibrator (ranges from vacuum to 20bar) • 7064: High pressure calibrator (ranges from 35 to 200bar) • 7066: Differential pressure calibrator (ranges from 0.2 to 10bar) • 7032: Semi-automatic pressure calibrator (ranges from 0.2 to 10bar) • 7065: Standard pressure indicator (ranges from vacuum to 600bar) • 7038: Multifunction pressure calibrator (ranges from vacuum to 600bar) • 7084: Line pressure controller (ranges from 5 to 200bar) Loop and Temperature Modules For process control applications a range of simulators, loop and temperature calibration modules are available. The 7051 can also be used as an automatic process calibrator. • 7001: PT100 simulator - °C and °F versions available (based on 1049) • 7068: RTD temperature calibrator (based on 7000) • 7077: Temperature and process calibrator (based on 1090) • 7061: Process calibrator Module (based on 7050) • 7085: Temperature distribution Module (Thermocouple and RTD) • 7067: Precision loop calibrator (based on 7005) • 7069: V-I loop calibrator (based on 1048) • 7079: Loop ancillaries module DMM and Electrical Test Modules CalBench can be fitted with digital multimeters from the Time Electronics range. These include the 5065 6.5 digit dmm and the 5075 precision multimeter. The 7051 multifunction module also incorporates a 6.5 digit multimeter, housed internally. For electrical test applications the 5068B can be bench fitted for the calibration of insulation testers up to 2.5kV. Also available is the 5030B electrical tester calibrator. • 5065B: 6.5 digit multimeter (see 5065 benchtop version) • 5075B: Precision digital multimeter (see 5075 benchtop version) • 7051: Integral 6.5 digit multimeter equivalent to 5065B • 5068B: Insulation Tester Calibrator (see 5068 benchtop version) • 5030B: Electrical Tester Calibrator (see 5030 benchtop version) 21 Calibration Bench Modules www.timeelectronics.com Signal Generation and Analysis Modules CalBench can be fitted with various frequency counters, function generators, RF signal generators and EMC test modules. Each module offers high accuracy and excellent resolution. • 7027: 3GHz universal frequency counter • 7028: 10MHz DDS function generator • 7029: 25MHz function/arbitrary/pulse generator • 7031: 50MHz function/arbitrary/pulse generator • 7048: 2GHz synthesised signal generator (AM, FM, phase modulation) • 7058: 6GHz signal generator • 7170: Mains/Harmonics analyser including flicker • 7171: 1kW low distortion power source (accompanying module for 7170) Oscilloscope Modules Oscilloscope modules with standard features including USB connectivity, automated measurements, limit testing, data logging, and context-sensitive help. • 5.7” LCD colour display • External trigger output • Autoset and signal auto-ranging • Probe check wizard Model Bandwidth Channels Sample Rate/Ch Record Length 7021 70MHz 2 1.0 GS/s 2.5k points 7022 70MHz 4 1.0 GS/s 2.5k points 7023 100 MHz 4 2.0 GS/s 2.5k points 7024 200 MHz 4 2.0 GS/s 2.5k points 7026 500 MHz 4 5.0 GS/s 10k points Additional and Custom Design Modules CalBench is fully customisable and Time Electronics can fit customer-specific modules or extras. Users can request instruments and devices be fitted in the bench consoles, modifications and additions to our current modules, or bench and console modifications. • 9758B: DC Electronic Load, 80A, 80V, 300W - for power supply calibration • 7043: 3 phase mains controller module • 7063: Isolated mains output sockets for 7082 mains Power module • Customer specific modules • Modules from Time Electronics portable and benchtop instruments range • Additional sockets, fittings, and connections on modules • Touch screen PC only module - 10.5” LCD display • Optional secondary console shelf unit (7081S) Supporting Instruments and Extras In addition to bench modules a selection of instruments and accessories can be provided to complement the system and enhance functionality. • Pressure: Handheld and tabletop pumps, gauges, and dead weight testers • Process: Field calibrators, dry block calibrators, and flow controllers • Mechanical: Gauge block sets and test weight kits • Line pressure: Compressors, vacuum pumps, air amplifiers and gas boosters • Repair & maintenance: Solder stations, worktop vices, magnifyers and more • Multi-purpose: Electronics service cases and tool kits • ESD: Anti-static worktops, grounding products, wrist wraps, and more • Lab Furniture: Accompanying work benches, cabinets, trollies (see page 23) • Bench fittings: Under worktop drawers, back panel tool kits and holders Calibration Bench Modules and Extras 22 Laboratory Design and Supply Turnkey workshop design service and supply The Design Process Time Electronics offer a turnkey design and supply service for customers requiring an efficient and ergonomic on-site calibration laboratory. It is created virtually, then supplied complete including all specified test instruments, tools, and furniture. CalBench acts as the primary work station of the laboratory, and is used for the main testing and verification workload. Each laboratory is designed to optimise the calibration process. This is accomplished by a dual approach of hardware and software. CalBench modules provide the functions to calibrate devices and instruments, whilst EasyCal software is the controlling platform for all work and management. It enables the operators to schedule workload, organise jobs, database and print/store information. The process starts by understanding the user’s requirements and applications. Once this is determined the design team will firstly configure the suitable calibration bench or benches, and if necessary add supporting instruments for customer specific applications. Following this the workspace dimensions are supplied and the virtual design begins. Using custom software we create a 2D overview of the laboratory, then generate 3D images and videos to allow the end users to visualise the concept. It also speeds up calibration by automating test runs when used with the 7051 multifunction calibrator/DMM or other compatible bench modules and instruments. In addition to the primary focus of calibration, the lab can incorporate customer designated areas of use. These could be stations for administration work, repair and maintenance, or storage units. Laboratories can be designed to be fully self-sufficient, including line pressure tools such as compressors and vacuum pumps. 6400mm 1200mm Rear Mounting Frame 1000mm 2000mm 1000mm 1200mm CALBENCH 4,700 mm 1200mm 2000mm Work Station Per fo Wall Trolley 23 Storage Cabinet Laboratory Design and Supply www.timeelectronics.com On-site Bench Installation, Training, & Calibration Time Electronics have comprehensive after-sales support packages for customers that purchase calibration benches, accompanying test instruments, and workshop equipment. On-site bench and lab installation: A travelling engineer will visit the test facility and install and commission the CalBench, supporting instruments, and laboratory furniture. Our technicians can perform site visits worldwide and are qualified to work on offshore platforms, power and processing plants, and refineries. On-site training and demonstration: Bench training can be included with the lab installation or scheduled for a later date. The technician will educate the users on how to set up the system and operate the bench modules and additional test instruments. They will also simulate the calibration process by demonstrating tests on actual devices at the site. On-site annual bench calibration and maintenance service: A technician can visit the test facility annually to perform calibration of the CalBench and test equipment. This can be scheduled before or after installation and can include additional training if required. Factory acceptance testing and bench training at TE UK: Customers can visit Time Electronics UK and receive training on their ordered system prior to shipment. We will schedule and arrange all aspects of the visit, including local transport and accommodation. Factory acceptance testing can be undertaken by the end user or their designated inspection company. Online EasyCal training: Using remote desktop sharing we can help customers understand and utilise the software for calibration work and management. We can provide basic tutorials or troubleshoot specific applications relative to the user’s system. Laboratory Design and Supply 24 EasyCal Calibration Software The comprehensive solution to calibration work and management Manage, Automate and Optimise the Calibration Process About Easycal EasyCal is a complete software package with features covering all aspects of calibration work and management. It is designed to reduce workload, improve efficiency, and provide the essential platform for companies looking to create and sustain an effective calibration program. The comprehensive features simplify the administration process from reminder reports through to despatch. With a familiar and intuitive user interface all operators can quickly learn and navigate through the applications. This allows fast, straightforward implementation and integration of the software. Features • Communicate with calibrators, DMMs, bench modules • Automated planning and scheduling • For use with multiple devices and instruments • Print/email/store certificates and reports • Network compatible • Produce calibration labels Communication and Control EasyCal automates calibration runs by allowing the user to remotely control and communicate with compatible calibrators and DMMs. User friendly features and controls aid the process to further decrease calibration times. EasyCal can also read back values and data from compatible Time Electronics pressure and process instruments, and can be used with external instruments such as dry block calibrators. • Quickly generate procedures using templates For Multiple Industries and Disciplines EasyCal is a versatile solution to multi-device calibration with the comprehensive functionality that is required across industries. It is globally used as the principal software in both calibration businesses and companies with on-site test facilities. • Print and read bar codes EasyCal is also designed for universal testing applications and can cover a wide range of disciplines. Users can calibrate and verify various instruments and devices: electrical and electronic; level, pressure, and flow; temperature and loop; mechanical and dimensional. 25 • 1200+ pre-written test procedures included • Calibration due reminder system • E-mail reminder letters and lists • Customise reports and certificates • Create PDF reports and certificates (PDF engine) • Universal instrument control • HART and Foundation Fieldbus communication • Secure user log in and electronic signatures • Create uncertainty tables for laboratory & site • WebCert feature for online certificates EasyCal Calibration Software www.timeelectronics.com Automating the Calibration Process with EasyCal CAL DATE Reminder letters and emails are sent to owner Unit for test is received and booked in Unit is checked and workload is scheduled Pre-Cal Testing is done using TE calibrator and EasyCal Results/reports are stored and printed Cal Certificate is issued and unit is returned Post-Cal EasyCal: For the Calibration Process Automating the calibration process brings important benefits and provides increased speed of calibration and consistency of results. Pre-Calibration: The calibration management features of EasyCal make the planning and organisation of instrumentation calibration simple. A recall/reminder system informs the user of upcoming jobs, and search functions allow the user to quickly identify a unit for test. Calibration: EasyCal controlled calibration significantly decreases testing times, meaning less instrument downtime and faster turnaround. This improves throughput meaning greater return on investment. EasyCal optimises the process by allowing the user to create procedures quickly and easily with the help of the included design wizards and pre-written templates. Post Calibration: Easily produce calibration certificates and reports to ISO 9001, ISO 17025, and other quality standards. These can be printed, stored, or emailed as PDFs. EasyCal has a selection of preformatted certificate templates suitable for displaying typical calibration results. The Core Benefits of using EasyCal Achieve compliance with quality standards •A utomated document control ensures conformity and quality •E stablish procedures to maintain repeatability and monitor quality • Schedule and maintain calibration intervals. • Evidence of traceability to national standards Create an efficient control and management system • Reduce testing times • Eliminate continual outsourcing calibration costs • Full control over the calibration process • Improve turnaround • Record calibration environmental conditions • Quick and easy solution to instrument analysis when needed • Produce calibration labels, maintain calibration history • Internal scheduling for calibrations. No external factors • Reduce possibilities for errors or omissions • Centralised document management •E lectronic record retention ensures integrity for successful audits • On demand networked review of certificates and reports EasyCal Calibration Software 26 EasyCal Calibration Software Overview of applications and features Inventory, Reminders, and Jobs A comprehensive inventory database can be created and customised to company requirements. For internal calibration and quality management, departments and users can be specified. Alternatively EasyCal can be used as the controlling system for a calibration business based around customers and owners. Search A powerful search feature enables the user to enter specific criteria to quickly find the required data. When adding details the user is aided by drop-down lists, which automatically update when new information is added. Input Fields Used to add details such as ID and serial number, manufacturer and model, instrument status and service notes. In addition custom fields can be created to integrate with a company system. Images can be uploaded to provide further reference. Instrument Recall and Reminder System Instruments which are due for calibration are listed on screen. Reminder letters and lists can be printed or emailed directly to the customer or department. An advanced notice period can be set to bring forward the recall date allowing for response time. Job Management When a unit for test is booked in the job process starts. Specific information about the job is entered; such as ‘service required’, ‘sub contracted’ and ‘accessories supplied’. A job sheet and label can be produced at this stage to accompany the instrument. As the job is put through the system these parameters can be updated, for example ‘quote price’, ‘job status’ and ‘invoiced’. Attachments Create links to technical files, specifications, web pages, word documents, videos, and more. These can be set to automatically display prior to the calibration run. Devices and Standards used for Calibration Traceability information for instruments and standards that perform the calibration work is stored and maintained by EasyCal. Uncertainties Uncertainty tables for laboratory and site can be created for each calibrating instrument. These are then automatically processed and applied to certificates as required. 27 Inventory, Reminders, And Jobs www.timeelectronics.com Procedure Writing and Editing Creating and editing test procedures is made simple with an intuitive, user-friendly interface. Editing test information can be done by adding, inserting, or copy and pasting. EasyCal keeps track of each time a procedure is edited. Procedure Library A calibration library comprising of over 1200 procedures covering a wide variety of instruments and devices is included as standard. Procedure Templates Procedure templates for multimeters, clamp meters, decade boxes, insulation testers, and more can be used for creating any new procedures as required. Fast Procedure Creation and Editing Copy and paste multiple tests. Globally edit a group of tests. Colour coded listing helps sort and identify different test types. Procedure Simulation The Calibration Run Simulator enables a procedure to be tested without the need for a controlling instrument. To further assist with development of procedures a test can also be edited during the actual calibration run. Format Certificates Colour code and add borders to test group titles. Add column headers where a change of layout is required. A preview feature allows the user to check the certificate layout to determine if formatting is correct. Conversion Tables Conversion tables for thermocouples, RTDs, current transformers, and clamp meter adaptors are included. Alternatively user-defined tables can be created. Remote Commands For more complex instrument control, commands can be sent on a test-by-test basis or run as a script. Closed loop calibration is also achievable using the universal readback feature. This allows EasyCal to control third party calibration equipment and communicate with devices under test. Procedure Writing and Editing 28 EasyCal Calibration Software Overview of applications and features Instrument and Device Calibration Automated calibration run provides fast and accurate collection of data, whether using direct instrument control or manual entry. EasyCal guides the operator through the procedure using graphical test screens and user prompts. Search Selection of the device under test is quick and easy. With the use of a barcode scanner this selection becomes automatic. Calibration Prompts Text and graphical prompts aid the user with instrument range selection and connection. So even the most complex calibrations can be performed with relative ease. Graphical Test Screen The calibration run is made simple and efficient by a graphical user-interface, which increases speed of data entry. The colour coded indication bar displays the test limits. This allows the operator to easily identify out of tolerance results. Test Control At any stage during the calibration run a summary can be displayed, this includes both completed and remaining tests. Colour coding indicates tests passed or failed. The operator is able to move forward or backward through the procedure as required. End of Calibration Run Data for every test is stored, including a snap shot of the procedure used. If required calibration comments and service history can be updated. The operator is able to print the certificate, produce a calibration label and/or store the results to be issued as required. Recovery Mode If for any reason a calibration run is interrupted, recovery mode allows the user resume from the point of termination. Calibration Test Forms Alternatively ‘calibration test forms’ for hand written results are available. This data is then entered manually into EasyCal at a later date. 29 Instrument and Device Calibration www.timeelectronics.com Certificates/Reports/Data Management Produce, print, and store calibration certificates, reports, and labels. Simple search facilities enable the user to locate any data on demand. Keeping track of instrument history and servicing is made easy. Certificate Templates A range of pre-formatted templates are available for immediate use. A company logo can be added without the need for 3rd party software. Electronic Signatures Password protected electronic signatures allow management to approve certificates. In addition a scanned image of the signature can automatically be inserted, eliminating the need to print certificates. Built-in PDF Engine Generate PDF reports and certificates ready for emailing and universal review. Calibration Reports Documented traceability provides a recorded audit trail. Reports showing calibration duration times can assist with costing and assessments. Archive The results database can be streamlined by using the archive feature. This improves data organisation and management. Archives are quickly retrieved, giving instant access to historical certificate data. Import and Export Exchange data from one system to another using the import/export feature. This method is ideal for site and field calibration work, where data is recorded externally then uploaded to the main database upon return. Customise Crystal Reports (optional) allows full modification of certificate, label, and report layouts. Design custom reports using queries, formulas, and running totals. Certificates/Reports/Data Management 30 EasyCal Add-Ons and Accessories Optional enhancements and extras for increased functionality EasyAdmin EasyAdmin is an add-on that provides increased security for EasyCal and it’s users. User Rights: A master user sets the user rights for the relative staff and defines log in criteria. Access Levels: Setting access levels within EasyCal to limit secondary users can be done, safe guarding sensitive information. Administration: EasyAdmin provides an administration point for calibration instruments, certificate information and user fields. Predefined Pick-Up Lists: For instrument manufacturers, sub contractors, customer details and other information. These can be created to make EasyCal data entry quick, easy and uniformed. WebCerts WebCerts is a web based application that enables EasyCal users to upload and retrieve certificates and reports online. Simple Upload/Download: Uploading is incorporated into EasyCal by allowing the user to quickly and directly upload to their WebCert folders via FTP. Secure User Log In: A security feature that allows users to access private folders with their relevant documentation. Ideal for companies with different sites or locations. Search and Filter: Users can easily locate required data by using the filter tabs or the straightforward search fields. Hosted Package: Time Electronics also offer a hosted WebCerts package where data is uploaded and stored on one of our designated WebCert servers. Retrieval and viewing of certificates is via the web based interface. EasyCal Accessories To complement and further optimise the calibration process Time Electronics offer a range of external options. Printer and Connectivity Kit: Inkjet printer for calibration certificates and reports. Also includes a DVD-RW, 4 port USB hub, numeric key pad and USB memory stick. Calibration and ID Label Printer: For printing labels to be placed on calibrated units. EasyCal has different layouts for required information to be shown. Job and Address Label Printer: For printing information that accompanies a unit under test through the calibration process. Also for user tagging instruments. Bar Code Reader: Enables fast identification of devices in the pre-calibration stage. EasyCal to PC Communication Options: Interface cables and adaptors providing PC connectivity to Time Electronics calibrators or external instruments. 31 EasyCal Add-Ons and Accessories EasyCal Networking With networking capabilities a multi-user system can be implemented Networking with EasyCal For multi-user systems EasyCal can be implemented as the universal software for administration, management, and control. With designated features for use in different workstations, EasyCal can provide a solution to calibration businesses with customers as well calibration departments within industrial plants. Calibration runs can be automated by using a compatible Time Electronics calibrator with EasyCal. Once calibration has been performed the data can be made available on the server to the necessary parties. Hard copy certificates and reports can be issued by authorised staff. Data can be shared and accessed on a central server, creating a organised and efficient networking set-up. EasyCal’s pre-calibration features enable automated scheduling and also speed up the booking in process with quick instrument indentification. Enhanced security features can be added for increased protection, allowing a master user to control access rights to data and applications. Also available is an online application enabling users to upload and retrieve certificates Calibration Lab Calibration and verification is performed using a 5025 multifunction calibrator or similar unit. Goods In EasyCal can be used to automate the calibration process, create or edit test procedures, and enter in any ‘ongoing’ job information. Scheduling is simplified by EasyCal’s recall/reminder system. Instruments are returned following reminder letters/emails. Certificates can be created, issued, and signed off as required. PDF copies can be held on the server for web upload or email purposes. Instruments arrive and are booked in. Job sheets and labels can be produced. EasyCal starts to optimize the job process for fast turnaround time. A simple search feature can locate the instrument’s data or a barcode reader can instantly identify the item. CAL DATE ‘Calibrated’ labels can be printed and placed on instruments before leaving the lab. CENTRAL The required information for a site job is transferred to a laptop or 5051 calibration system. Alternatively ‘calibration test forms’ can be produced for hand written entry. SERVER Calibration Manager Online Can oversee the complete operation. The calibration standards and instruments used by the laboratory are also monitored on the system. Office Create, edit, and sign off test procedures. View and issue reports and certificates. Simulate calibration runs. Office stations can keep track of job and customer information. As the key user the manager can control user access to data and programs. With the networking system in place the process of performing site calibrations is made faster and easier. The data is imported to the central servers’ database or entered into EasyCal back at base manually. Once uploaded on the system, necessary parties can access/modify data without the need for paperwork to be passed from station to station. Create and update uncertainty information. Monitor progress and calibration statistics. Site Add necessary details to database. Edit/update any changes to personnel, job requirements, and schedules. Print and issue hard copy job reports for internal use and documentation to accompany outgoing instruments. Customers or employees can use EasyCal’s ‘WebCerts’, a web based application allowing certificate retrieval online. A secure log in feature allows access the user’s private folder with their relevant documentation. Specific PDF calibration certificates can be located quickly and easily using WebCert’s simple search function. The user can print calibration certificates for instruments as required. This is especially useful when certificates are lost or misplaced. Produce reminder reports, issue certificates, and send emails and letters to customers. EasyCal Networking 32 Product Listings Carry Case Rechargeable Battery Pack Mains Power Supply EasyCal Software Factory Calibration Certificate (NPL) UKAS Calibration Certificate (ISO 17025) Ordering information for Time Electronics products 1040 Resistance Box (1Ω - 100MΩ) C161 C114 opt 9026 – – – 1041 Resistance Box Low Ohm (0.01Ω - 1kΩ) C161 C114 opt 9026 – – – 1051 Resistance Box Low Ohm (0.01Ω - 1MΩ) C161 C114 opt 9026 – – – 1053 Inductance Box (1mH - 10H) C170 C114 – – – – – Decade Boxes 1061 Resistance Box Low Cost (1Ω - 1.2MΩ) C161 C114 – – – 1065 Resistance Box - Power 10W (0.1Ω - 120kΩ) C161 C114 – – – – 1067 Resistance Box Precision Low Ohm (10mΩ - 12KΩ) C161 C114 – – – – 1068 Precision Fixed Resistance Box (1Ω - 10KΩ) C164 C114 – – – – 1070 Capacitance Box (100pF - 10μF) C161 C114 opt 9026 – – – 1071 Capacitance Box (10pF - 100μF) C161 C114 opt 9026 – – – – Portable Voltage, Current, Loop & Temperature Instruments 1006 DC Millivolt Source - 0.02% Accuracy C150 C100 opt 9027 opt 9529 – 1007 DC Millivolt Potentiometer & Calibrator - 0.02% Accuracy C150 C101 opt 9027 opt 9529 – – 1010 DC Voltage Calibrator - 0.02% Accuracy C151 C102 opt 9021 internal – 1017 DC Multifunction V/I/R Calibrator - 0.005% Accuracy C152 C109 – internal – 1021 DC Current Source With Null Meter - 0.02% Accuracy C153 C105 opt 9027 opt 9529 – – 1024 DC Current Calibrator with Null Meter - 0.02% Accuracy C154 C106 opt 9021 internal – 1030 Voltage & Current Source (MicroCal) - 0.1% Accuracy C155 C110 opt 1031 – – 1044 DC Voltage and Current Calibrator - 0.05% Accuracy C156 C133 – opt 7643 – 1048 Voltage / Current / Loop Calibrator - 0.02% Accuracy C176 C138 – opt 7643 – 1049 PT100 Simulator Handheld (Class A °C) C161 C114 – – – 1050 PT100 Simulator Handheld (Class A °F) C161 C114 – – – 1077 Milliamp Transducer/Line Simulator - 0.02% Accuracy C158 C108 opt 9027 opt 9529 – – 1090 Temperature and Process Calibrator C177 C139 internal – 7000 RTD Temperature Calibrator C183 C194 internal opt 7633 7005 Voltage / Current / Loop Calibrator - 0.01% Accuracy C184 C195 internal opt 7633 7006 Loop Simulator & Source (Loop-Mate 1) - 0.1% Accuracy C145 C145 – – – 7007 Loop Signal Indicator (Loop-Mate 2) - 0.05% Accuracy C145 C144 – – – 7050 Process and Thermocouple Calibrator C180 C192 field case internal – – Electrical Test Calibrators 5030 Electrical Tester Calibrator C201 C137 – – ECFLA 5068 Insulation Tester Calibration System C189 C112 field case internal – 5069 Insulation Tester Calibration System C189 C112 field case internal – 5070 Micro-Ohmmeter and Ductor Tester Calibrator C146 C107 field case – – – 5080 Portable Appliance Tester Calibrator (PatCal) C188 C135 field case internal – Portable Pressure Instruments 7010 Pressure Calibrator (Vac to 600bar versions) C178 C190 field case internal ECFLA 7015 Pressure Calibrator (Vac to 600bar versions) C178 C190 field case internal ECFLA 7016 Regulated Pressure Calibrator (Vac to 20bar versions) C178 C190 field case internal ECFLA 7018 Differential Pressure Calibrator (Vac to 10bar versions) C178 C190 field case internal ECFLA ECFLA 7040 Pressure/Current Calibrator (Vac to 20bar versions) C185 C196 – – 7090 Handheld Pneumatic Pump Kit (-950mbar to 40bar) – – – – – – 7095 Handheld Hydraulic Pump Kit (0 to 700bar) with hoses, fittings, case – – – – – – – 7193 Benchtop Pneumatic Calibration Pump (0.95bar vac to 40bar) – – – – – 7194 Benchtop Pneumatic Calibration Pump (0.95bar vac to 100bar) – – – – – – 7195 Benchtop Hydraulic Calibration Pump (0.9bar vac to 600bar) – – – – – – 7078 Auto Ranging Digital Gauge (Vacuum to 200bar, 0.1% accuracy of setting) – – – 7089/91/94/96 Digital Gauges (7089: Vac / 7091: Vac - 40bar / 7094: 100bar / 7096: 700bar, 0.2% acc) 7198 Pressure Calibration Accessories Kit (Adaptors, fittings, connectors, hoses) C204 C205 C202 C203 – – – ECFLA – – – – Pressure Range Codes for 7010, 7015, 7016, 7018 and 7040 33 Range (bar) Vac 0.2 2 5 10 20 35 70 100 200 400 600 Option Code 7111 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 Product Listings ECFLA EasyCal Software 9714 10 Ch Scanner card 9726 10 Ch Scanner card 9715 GPIB Interface 9717 RTD Probe Adaptor – o o – o o – o o – o – – Test Leads Order code by product ECFLA EasyCal Software o – – – – – – – – – o – o o o o o – – – – – – o o o – o o – – – ECFLA EasyCal Software 9798 Capacitance and Inductance 9787 Full Range Resistance 5025 Multifunction Calibrator o o o o o o o o o o o o o o o o o C134 – – o o o o o o o 5025 RS232/GPIB 5030 RS232 5045 RS232/GPIB 5051+ USB/LAN 5065 RS232/USB 5077 RS232/GPIB 7010 RS232 7015 RS232 7016 RS232 7018 RS232 7040 RS232 7091 RS232 7096 RS232 C159 C103 5018 RS232/GPIB Multifunction Calibration System 5011 RS232/GPIB 5051+ UKAS Calibration Certificate (ISO 17025) (main options listed) Factory Calibration Certificate (NPL) Multifunction Calibrators 9773 Optical Tacho Adaptor – – 9780 Clamp Meter Adaptor – – 9760 Power Amplifier – – 9790 100 Amp AC Current Transformer – – 9764 Current Probe Calibration Adaptor – – 9762 Rubidium Frequency Reference – – 9783 Oven-Controlled Frequency Reference – – 9769 Scope 2.2GHz Levelled Sine Generator – o 9770 Oscilloscope Calibration o o 9797 Power Calibration o – 9771 Wideband AC V o 5075 GPIB C147 C128 C160 C124 9728 Rack Mount Kit Oscilloscope Calibrator Power Calibrator 9085 Carry Case (9082 for 5051) 5045 5077 9796 Test Leads 9764 Current Probe Calibration Adaptor o – 9762 Rubidium Frequency Reference o 9769 2.2GHz Levelled Sine Generator o o 9780 Clamp Meter Adaptor o o 9790 100 Amp AC Current Transformer o o 9720 1KV DC Option (includes 9721) o o 9724 30V DC Option 9729 Frequency Option (10MHz digital) C171 C115 C142 C104 9721 200V DC Option 9718 Current Option (220mA max) Resistance/Temperature Calibrator DC/AC Voltage/Current Calibrator 9719 AC Option (22V max) 9711 DCV / Thermocouple Option 5011 5018 ATE / Bench Calibrators Factory Calibration Certificate (NPL) 9733 Rear Terminals UKAS Calibration Certificate (ISO 17025) 9728 Rack Mount Kit o C162 C130 9713 Carry Case C173 C117 Precision Digital Multimeter UKAS Calibration Certificate 6.5 Digit Bench Multimeter 5075 Digital Multimeters Factory Calibration Certificate (NPL) 5065 9728 Rack Mount Kit www.timeelectronics.com 9588 RS-232 Cable – – o o o o o o o 9597 GPIB Cable – – – – – – – – – – 9794 GPIB to USB Interface Adaptor o o o – o – o o o – – – – – – – 9765 RS-232 to USB Interface Adaptor – – – o o o o o o o 9763 USB to 4x RS232 Interface Adaptor o o o o o – o – o o o o o o o o 9743 PCI to GPIB Interface Card for PC o o o o o – o o o – – – – – – – Instrument to PC Communication Accessories EasyCal Licenses, Add-Ons, and Accessories Primary Licenses ECFL ECFLA EasyCal Full License (stand alone, when purchased individually) EasyCal Full License (when purchased with compatible calibrator/DMM) Secondary Licenses EC2FL EasyCal Additional Full License (secondary user) EC2CL EasyCal Calibration Station License (limited work station features) EC2WL EasyCal Work Station License (full management/scheduling, no calibration run) EasyCal Add-Ons EAD2 EasyAdmin - 2 Users: Security add-on that enables setting of user rights, access levels, and more. EAD5 EasyAdmin - 5 Users: Security add-on that enables setting of user rights, access levels, and more. EAD10 EasyAdmin - 10 Users: Security add-on that enables setting of user rights, access levels, and more. EWC EWCTE CREP WebCerts: Online application enabling upload and retrieval of certificates and reports WebCerts - Hosted by Time Electronics: Online application enabling upload and retrieval of certificates and reports. Crystal Reports Sofware: Edit and format certificate styles EasyCal Accessories 9795 Printer and Connectivity Kit 9777 Bar Code Reader 9778 Cal and ID Label Printer 9779 Job and Address Label Printer For full listings on calibration benches and options please visit www.timeelectronics.com Product Listings 34 Time Electronics Calibration, Test and Measurement Time Electronics Ltd., Unit 11 Sovereign Way, Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. United Kingdom. T: +44 (0) 1732 355993 F: +44 (0) 1732 770312 E: [email protected] www.timeelectronics.com For more information please contact your local Time Electronics representative: Due to continuous development Time Electronics reserves the right to change specifications without prior notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project