Philips OTT2000/05 User manual

Philips OTT2000/05 User manual
Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
User manual
OTT2000
Contents
1Safety
2
Safety2
2 Your classic micro sound system
4
Introduction4
What's in the box
4
Overview of the product
5
3 Get started
Connect power
Prepare remote control
Turn on
Set the clock
8
8
8
8
9
4Play
9
9
11
11
12
12
5 Listen to FM radio stations
13
13
13
14
14
6 Listen to an external device
14
7 Other features
15
15
15
15
Play a disc
Play vinyl record
Play from USB
Play from a Bluetooth device
USB record
Search for a radio station automatically
Program radio stations automatically
Program radio stations manually
Select stereo/mono broadcast
Set the sleep timer
Set the alarm timer
Adjust the volume
8 Product information
16
16
16
17
Specifications
USB playability information
Supported MP3 disc formats
9Troubleshooting
18
General18
About Bluetooth connection
18
10Notice
19
Compliance19
Care for your product
19
Care of the environment
19
Important notes for users in the U.K.
20
Trademark notice
20
Copyright20
EN
1
1Safety
•
•
Read and understand all instructions before you
use this product. If damage is caused by failure
to follow the instructions, the warranty does
not apply.
Safety
Warning
•• Never remove the casing of this apparatus.
•• Never lubricate any part of this apparatus.
•• Never look into the laser beam inside this apparatus.
•• Never place this apparatus on other electrical
equipment.
•• Keep this apparatus away from direct sunlight, naked
flames or heat.
•• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
•
•
•
•
•
The device shall not exposed to dripping
or splashing.
Do no place any source of danger on the
device (e.g. liquid filled objects. lit candles).
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Make sure that there is enough free space
around the product for ventilation.
Only use attachments/accessories specified
by the manufacturer.
Risk of electric shock or fire!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are split on or into the product,
disconnect it from the power outlet
immediately. Contact Consumer Care to
have the product checked before use.
2
EN
•
•
•
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
Never remove the casing of this product.
Risk of short circuit or fire!
• Before you connect the product to the
power outlet, make sure that the power
voltage matches the value printed on the
back of the product. Never connect the
product to the power outlet if the voltage
is different.
• Never expose the product to rain, water,
sunshine, or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or fire.
Risk of injury or damage to the product!
• This product shall not be exposed to
dripping or splashing!
• Do not place any sources of danger on this
product (e.g. liquid filled objects, lighted
candles).
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Only use attachments/accessories specified
by the manufacturer.
Risk of overheating!
• Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
•
Make sure that curtains or other objects
never cover the ventilation slots on the
product.
Risk of swallowing coin battery!
• The device may contain a coin/button
type battery, which can potentially be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Make sure that the
battery compartment is completely secure
after you replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
Note
•• The type plate is located on the back of the product.
EN
3
2 Your classic
micro sound
system
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this product, you can:
• listen to vinyl records,
• listen to FM radio stations,
• listen to audio CDs,
• listen to audio from an external device
through the AUDIO-IN socket,
• listen to audio from an external device via
Bluetooth connection.
• listen to audio from a USB storage device.
What's in the box
Check and identify the contents of the package:
• Main unit
• Short User manual
• Remote control
4
EN
Overview of the product
u
t
s
a
q
v
e
f
g
Overview of the device
a Vinyl record platter
c
d
p
o
o
n
b
c
d
b
r
• Open/close the disc compartment.
REC
• Record the track from disc/FM/Phono/
AUX/Bluetooth to a USB device.
• Turn on the device, or switch to
Standby mode.
l
m
kl
j
hi
e SOURCE knob
• Select a source: CD, USB, FM, Phono/
Aux, or Bluetooth.
f AUDIO IN
• Connect an external audio device.
g
h
• Headphone socket.
• USB socket.
i Disc compartment
j Display panel
• Show current status.
EN
5
k IR sensor
• Detect signals from the remote control
(always point the remote control
towards the IR sensor).
l
•
•
•
•
m
/
Skip to the previous/next track.
Tune to a radio station.
Press and hold the key to search within
a track in disc/USB source.
Adjust time.
• Start or pause playback.
n VOLUME
• Rotate the knob to adjust volume.
Overview of remote control
a
b
c
o
n
d
m
e
f
g
h
i
l
k
j
o +/• Skip to the previous/next album.
• Select a preset radio station.
p
• Stop play.
• Erase a program.
q power indicator
• Lights when the unit is in standby
mode.
a SOURCE
• Select a source: CD, USB, FM, Phono/
Aux, or Bluetooth.
b
r Arm rest
s Auto stop selector
c
/
• Skip to the previous/next track.
• Tune to a radio station.
• Press and hold the key to search within
a track in disc/USB source.
• Adjust time.
d
/
• Skip to the previous/next album.
• Select a preset radio station.
• Adjust time.
t Speed selector
u Tone arm
v Bluetooth indicator
• Flashes when the unit is in paring
mode or connecting mode.
• Lights when the unit is connected with
Bluetooth compatible device.
• Turn on the device, or switch to
Standby mode.
e CLOCK/PROG
• Set clock in standby mode.
• Program tracks in disc/USB source.
• Program radio stations.
f SLEEP/TIMER
• Set the sleep timer.
• Set the alarm timer.
6
EN
g
REC
• Record the track from disc/FM/Photo/
AUX/Bluetooth to a USB device.
h FIND/FILE CUT
• Search tracks by title or by folder name
in disc/USB source.
• Press to cut the audio file when
recording audio files from Phono/
AUX/Bluetooth source to a USB
storage device.
i VOL +/• Increase or decrease volume.
j
• Mute or restore volume.
k INFO/DELETE
• In disc/USB source, press to display the
playback information of .mp3 files.
• Delete files from the USB storage
device.
l PLAY MODE/FM/ST/MO
• In disc/USB source, select repeat play
mode.
• In disc/USB source, select random play
mode.
• In FM source, select stereo playback or
mono playback.
m
n
• Stop playback.
• Start or pause playback.
o DISPLAY
• Display the time in any source mode.
EN
7
3 Get started
3
Close the battery compartment.
Always follow the instructions in this chapter in
sequence.
Connect power
Connect the AC power cord to the AC
MAIN~ socket and then to the wall outlet.
Note
•• Before pressing any function button on the remote
Prepare remote control
control, first select the source with the remote control
and not the main unit.
•• If the the remote control will not be used for an
extended period of time, remove the battery.
Caution
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
2
Open the battery compartment.
8
EN
Insert one CR2032 battery with correct
polarity (+/-) as indicated.
Turn on
Press .
»» The product switches to the last
selected source.
• To switch the product to standby
mode, press again.
Set the clock
1
2
4Play
In standby mode, press CLOCK/PROG.
Press
/
to select a time format, and
then press CLOCK/PROG to confirm.
»» Hour digits blink.
3
Press
/
to set the hour, and then
press CLOCK/PROG to confirm.
»» Minute digits blink.
4
Press
/
to the minute and then
press CLOCK/PROG to confirm.
Play a disc
1
Press SOURCE repeatedly to select CD
source.
2
3
Press
4
Play starts automatically. If not, press
to open the disc compartment.
Insert a disc with the printed side facing up,
and then close the disc compartment.
.
Pause/resume play
•
During play, press
play.
to pause/resume
Skip to a track
For CD:
• Press
/
to select another track.
For MP3 disc and USB:
1
Press PRESET/ALBUM
album or a folder.
2
Press
/
/
to select an
to select a track or a file.
Search within a track
1
2
During play, press and hold
/
.
Release to resume normal play.
EN
9
Program tracks
Note
•• For MP3 files, the bit rates from 32 kbps to 320 kbps
Note
are supported.
•• You can program tracks only when the play stops.
•• You can program a maximum of 20 tracks.
1
In playback stop mode, press CLOCK/
PROG to activate the program mode.
»» [MEMORY] (memory is displayed on
the screen.
2
For MP3 tracks, press
album.
3
Press
/
to select a track, then press
CLOCK/PROG to confirm.
4
Repeat steps 2 to 3 to program more
tracks.
5
Press
to play the programmed tracks.
• To erase the program, in the stop
position, press .
• The program mode stops automatically
if no button is pressed for about 10
seconds.
/
to select an
For CD/MP3: Search by title
1
In playback stop mode, press FIND/FILE
CUT once.
»» The titles of all tracks are displayed in
alphabetical order.
2
Press
/
to search for the desired
track title in alphabetical order.
3
Press
track.
start playback of the selected
For MP3: Search by folder
1
In playback stop mode, press FIND/FILE
CUT twice.
»» The folders are displayed in
alphabetical order.
2
3
Press
/
Press
folder.
start play all the tracks in the
to select a folder.
Display play information
Select repeat/shuffle play options
During playback, press and hold INFO.
• For CD:
• Lap time of current track
• Lap time remaining of current track
• Total lap time of all tracks
• Total lap time remaining of all tracks
• For MP3 disc and USB: ID3 information,
such as [TITLE] (title), [ARTIST] (artist),
[ALBUM] (album).
1
During play, press PLAY MODE/FM/ST/
MO to select a repeat option or the
shuffle play mode.
•
: Repeat the current track
•
: Repeat the current folder
(for MP3 disc)
•
: Repeat all
•
: Random play
2
To resume normal play, press PLAY
MODE/FM/ST/MO repeatedly until no
option is displayed.
Search tracks
You can search a track by title or folder name
within a disc/USB.
10
EN
Play vinyl record
Caution
Note
•• The micro system automatically switches to AUX
source when there is an external device is connected
through the AUDIO IN socket.
•• Remove the stylus protector before use.
•• Place one vinyl record on the platter at a time.
•• Keep 15 cm at least between the device and other
objects.
1
Press SOURCE repeatedly to select
PHONO/AUX source.
2
Select the correct speed with the speed
selector.
• You can select speed 33 or speed 45
according to different vinyl type.
3
Place the vinyl record on the turntable
platter.
4
Lift the tone arm carefully and move it
towards the record.
»» The turntable platter starts rotating
automatically.
5
Gently lower the tone arm onto the edge
of the record to begin playback from the
beginning.
»» Playback starts.
6
Adjust the volume to the desired level.
• If AUTO STOP is set to ON, the
platter stops rotating automatically
after playback finishes.
7
Put the tone arm securely back on the arm
rest.
Play from USB
Note
•• Make sure that the USB storage device contains
playable audio content.
•• Only MP3 files with bit rates from 32 kbps to 320 kbps
are supported.
•• The USB socket does not support connections
with USB extension cables and is not designed for
communicate directly with a computer.
1
Push down the USB protective cover and
then insert a USB storage device into the
socket.
2
Press SOURCE repeatedly to select USB
source.
»» Play starts automatically. If not, press
.
• To select a folder, press / .
• To select an audio file, press
/ .
EN
11
Play from a Bluetooth device
You can listen to a Bluetooth device through
the micro system.
Note
•• Before you connect a Bluetooth device to the unit,
familiarize yourself with the Bluetooth capabilities of
the device.
•• Keep the unit away from other electronic devices that
may cause interference.
•• The effective operation range between the unit and the
paired device is approximately 10 meters (30 feet).
•• Any obstacle between the unit and the device can
reduce the operational range.
1
Press SOURCE repeatedly to select BT
source.
»» The Bluetooth indicator flashes blue.
2
Activate the Bluetooth function on your
Bluetooth device (see the device user
manual).
3
Select "PHILIPS OTT2000" on your device
for pairing.
4
After successful connection, the Bluetooth
indicator turns to solid blue.
5
Start music play on your Bluetooth device.
Tip
•• If the micro system switches from a Bluetooth source
to another source, the connected Bluetooth device
disconnects automatically.
•• The system can memorize up to 4 previously
connected Bluetooth devices.
The first time you record to the USB storage
device, a folder named 'PHILIPS OTT2000' is
automatically created in the USB storage device.
Each time you record, the recorded files are
stored to this folder.
Record to USB
Plug the USB storage device into the
socket of this device.
1
Prepare the source to record from.
• Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• AUX IN - Select the Phono /Aux
source, then connect and start to play
an external device.
• Phono - Select the Phono /Aux source,
then play the vinyl record.
• Bluetooth - Select the Bluetooth
source and play the tracks.
2
Press
REC to start recording.
• For CD discs, press
REC repeatedly
to select:
A[REC_ONE] (record one): the first/
current track is recorded.
B[REC_ALL] (record all): all tracks/the
remaining tracks are recorded.
»» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press .
Note
•• If the USB storage device does not have enough
USB record
Audio CD tracks, MP3 discs,audio from vinyl
record and Bluetooth, radio, and audio from
external devices can be recorded as .mp3
format files to a USB storage device.
12
EN
memory to store the audio files, a message about a full
memory is displayed.
•• For CD disc, recording process is completed only when
the entire track is recorded.
•• For MP3 discs, the system copies files to the USB
storage device if
REC is pressed.
Cut a file
When you record audio files from Bluetooth/
AUX/PHONO/FM to a USB storage device,
you can cut a file by pressing FIND/FILE CUT
during recording. A new audio file is generated
and recording continues.
Delete file from USB
1
In playback stop mode, press SOURCE
repeatedly to select USB source.
2
Press INFO/
DELETE.
»» DEL -- 001 is displayed in the screen.
3
Press
/
deleted.
4
Press DELETE to confirm.
• To exit file deletion mode, press .
to select the file to be
5 Listen to FM
radio stations
1
Turn the SOURCE knob to select FM
source.
2
Search for radio stations automatically or
manually.
Note
•• For optimal reception, fully extend the antenna and
adjust its position.
•• You can store a maximum of 20 FM radio stations.
Search for a radio station
automatically
1
Press and hold
/
for more than 2
seconds.
»» The radio automatically tunes to a
station with strong reception.
2
Repeat step 1 to tune to more stations.
»» When a radio station with a strong
signal is detected, the search stops and
the radio station is broadcast.
Program radio stations
automatically
1
Press CLOCK/PROG for more than 2
seconds to activate automatic program
mode.
»» All available stations are programmed
in the order of waveband reception
strength.
»» The first programmed radio station is
broadcast automatically.
2
Press
/
to select preset radio stations.
EN
13
Program radio stations
manually
1
2
Press
3
Press / to allocate a number to this
radio station.
4
Press CLOCK/PROG to confirm.
»» The radio station is stored with the
selected sequence number.
5
Repeat steps 1-4 to program more radio
stations.
/
to tune to a radio station.
Press CLOCK/PROG to activate the
programming.
Note
•• If a radio station is stored over the sequence number
of a previously saved station, the earlier station will be
overwritten.
Select stereo/mono broadcast
To improve the reception of stations with weak
signals, monaural sound should be selected.
• In tuner source, press FM/ST/MO to select
a setting:
• [STEREO]: stereo broadcast.
• [MONO]: monaural broadcast.
14
EN
6 Listen to an
external device
You can also listen to an external audio device,
for example, MP3 player, through this product.
1
Turn the SOURCE knob to select
PHONO/AUX mode.
2
Connect the audio in cable to
• the AUDIO IN socket on the front
panel of this product, and
• the headphone jack on the external
device.
3
Play the external device (refer to its user
manual).
7 Other features
Set the sleep timer
This micro sound system can automatically
switch to standby after a set period of time.
• When the micro system is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
• [SLEEP -- 90]
• [SLEEP -- 75]
• [SLEEP -- 60]
• [SLEEP -- 45]
• [SLEEP -- 30]
• [SLEEP -- 15]
• [OFF]
»» When sleep timer is activated, [SLEEP]
is displayed.
To deactivate sleep timer
• Press SLEEP/TIMER repeatedly until
[SLEEP OFF] (sleep off) is displayed.
»» When sleep timer is deactivated,
[SLEEP] disappears.
5
Press SLEEP/TIMER to confirm.
»» The hour digits begin to blink.
6
7
Press
8
9
Press
/
to set the hour.
Press SLEEP/TIMER to confirm.
»» The minute digits begin to blink.
/
to set the minute.
Press SLEEP/TIMER to confirm.
»» The timer is set and activated.
Activate and deactivate the alarm
timer
1
Press to switch the micro system to
standby mode.
2
Press SLEEP/TIMER repeatedly to activate
or deactivate the timer.
»» If the timer is activated, the display
shows .
»» If the timer is deactivated, is not
shown on the display.
Note
•• If DISC/USB source is selected and the track cannot be
played, tuner is automatically activated.
•• The micro sound system automatically switches to
standby mode if no operation is performed within 30
minutes after the alarm source is activated.
Set the alarm timer
This micro system can be used as an alarm
clock. The disc, USB, or tuner is activated to play
at a preset time.
1
Press to switch the unit to standby
mode.
2
Make sure that you have set the clock
correctly.
3
Press and hold SLEEP/TIMER.
»» A prompt to select the source is
displayed.
4
Press SOURCE repeatedly to select a
source: CD, USB, or FM.
Adjust the volume
Turn the VOLUME knob to increase/decrease
volume.
EN
15
8Product
information
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
Note
1.5 W x 2 RMS
60 Hz - 16 kHz,
±3 dB
> 65 dB
0.5 V RMS 20 kohm
•• Product information is subject to change without prior
notice.
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
Specifications
General information
4 ohm
2 X 3" full range
84 dB/m/W
Bluetooth
AC Power Rating
Operation Power Consumption
Standby power consumption
Dimensions
- Main Unit ( W x H x D)
220 - 240
V~, 50 Hz
16 W
< 1W
335 x 311 x
169 mm
2.5 kg
Weight (Main Unit)
Communication
system
Output Maximum
communication
range
Frequency band
Compatible
Bluetooth profiles
Tuner
Tuning Range
Tuning grid
Total Harmonic Distortion
Signal to Noise Ratio
Number of preset radio stations
FM: 87.50 108.00 MHz;
50 kHz
< 2%
> 50 dB
20
Bluetooth Standard
version 2.1
Bluetooth Standard Power
Class 2
Line of sight approx. 10m
(30 feet)
2.4 GHz band (2.4000
GHz - 2.4835 GHz)
Advanced Audio
Distribution Profile
(A2DP)
Supported codecs
- Receive
SBC (Sub Band Codec)
- Transmit
Not supported
USB playability information
Vinyl
Supported vinyl size
7 inch
Speed
12inch
33/45
16
EN
Compatible USB devices:
• USB flash memory (USB 1.1 and USB 2.0)
• USB flash players (USB 1.1 and USB 2.0)
• memory cards (requires an additional card
reader to work with this unit)
Supported formats:
• USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 to v2.3
• File name in Unicode UTF8 (maximum
length: 16 bytes)
Supported MP3 disc formats
•
•
•
•
•
ISO9660, Joliet
Maximum title number: 999 (depending on
file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
Supported Bit-rates: 32~320 (kbps),
variable bit rates
EN
17
9Troubleshooting
•
•
Power has been interrupted, or the AC
power adaptor has been disconnected.
Set the clock/alarm again.
Warning
•• Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
product, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the product is nearby and the
model number and serial number are available.
General
No power
•• Make sure that the AC power cord is
properly connected.
•• Make sure that there is power at the AC
power outlet.
No sound
•• Adjust the volume.
•• When listening to an external device, make
sure that the external device is not muted.
No response from the product
• Make sure that the power is available.
• Turn off the product, and then turn it on
again.
Poor radio reception
•• Due to the interference from other
electrics or building obstacles, the signals
become weak. Move the product to a
place free of interference.
•• Make sure that the antenna is fully
extended. Adjust the position of the
antenna.
Clock/alarm setting is erased.
18
EN
About Bluetooth connection
Music playback is unavailable on this product
even after successful Bluetooth connection.
•• The device cannot be used with this
product to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•• The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between.
Cannot connect with this product.
•• The device does not support the profiles
required for this product.
•• The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•• This product is not in the pairing mode.
•• This product is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try again.
•• Press to restart the product or switch
the product to Bluetooth source again for
reconnection.
The paired mobile device connects and
disconnects constantly.
•• The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between.
•• Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of this product.
•• For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
this product.
10Notice
Care of the environment
Disposal of your old product and battery
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, WOOX Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC. You can find the
Declaration of Conformity on www.philips.com/
support.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
negative consequences for the environment and
human health.
Removing the disposable batteries
Care for your product
To remove the disposable batteries, see battery
installation section.
•
Environmental information
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove the discs from the disc
compartment if you are not using the
product for an extended period of time.
Only use microfiber cloth to clean the
product.
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
EN
19
Important notes for users in
the U.K.
Trademark notice
Mains fuse
This information applies only to products with a
UK mains plug.
This product is fitted with an approved molded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
Copyright
Contact your dealer if you are not sure about
what type of fuse to use.
2014 © WOOX Innovations Limited. All rights
reserved.
Caution: To conform with the EMC directive
(2004/108/EC), do not detach the plug from
the power cord.
Specifications are subject to change without
notice. WOOX reserves the right to change
products at any time without being obliged to
adjust earlier supplies accordingly.
How to connect a plug
The wires in the power cord are colored as
follows: blue = neutral (N), brown = live (L).
If the colors do not correspond with the colors
on your plug, identify the terminals in your plug
as follows:
1
Connect the blue wire to the terminal
marked N or colored black.
2
Connect the brown wire to the terminal
marked L or colored red.
3
Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
colored green (or green and yellow).
Before you replace the plug cover, make sure
that the cord grip is clamped over the sheath of
the cable and not just over the two wires in the
cable.
Copyright in the U.K.
Recording and playback of material may require
consent. see Copyright Act 1956 and The
performer’s Protection Acts 1958 to 1972.
20
EN
EN
21
Specifications are subject to change without notice
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and
are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
OTT2000_05_UM_V1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement