null  User manual
Intelligent
Evaporation
Leading Safety Standards
Superior Ease of Use
Reduced Cost of Ownership
Leading Safety Standards
•Two independent safety circuits avoid an •Heating bath is constructed with a
overheat situation of your heating bath:
If bath temperature overshoots by 5 °C
and if your water bath runs dry, heating
will be switched off automatically
•To avoid an overtemperature situation
and potential thermal damage to your
sample, you can individually pre-program
a maximum temperature on the Hei-VAP
Precision, at which the bath powers off
•In case of a power cut, all motor lift
models will remove the flask from the
heating bath preventing safety hazards
and potential thermal damage to your
sample
•To protect you from splashes and
scalding, the Hei-VAP heating bath
features an integrated pour spout to
remove bath fluid safely
double wall for your protection against
burns and scalding
•The guard hood covers the entire bath
completely even if the heating bath is
adjusted horizontally to its most extreme
limit
•All heating baths feature non-slip
handles with safety grip to protect you
from scalding bath liquids and allow for
easy installation/removal of the bath
•A separate on/off switch for heating
prevents unintentional heat-up. The
button is illuminated for visual control
•A metal support between the heating
•In case of an overshoot of any parameter
•To protect your heating bath against
•Glassware assemblies are optionally
•For your protection, the operating panel
•IQ-OQ documentation is available
bath and the base unit prevents bath
instability
short-circuits and systematic corrosion,
the cable coupling complies with the
protection class IP 67
is located near the base so as to keep
your hands out of the dangerous zone
of rotating flasks, steam and splashing
bath fluids
setting, all models will show a warning
on the operating panel
available with transparent plastic safety
coating ensuring ultimate protection
while allowing visual control at all times
for Hei-VAP models on request
Hei-VAP heating bath
Do you demand the highest safety
standards, perfectly engineered ease
of use and reduced cost of ownership?
YO UR ADVANTAGE S
•Only the Hei-VAP heating bath reaches
a temperature of 210 °C
•The universal heating bath can even
accommodate 5-liter flasks
Intelligent Evaporation...
... stands for an overheat protection design that prevents water baths
running dry, provides a detachable panel for superior ease of use from
outside closed fume hoods and offers a proven vacuum seal and vapor
tube system guaranteed for years of operation!
2
•The heating bath can be adjusted
horizontally up to 200 mm
•To prevent short circuits and corrosion,
the cable coupling complies with the
protection class IP 67
•Non-slip handles for safe transportation
eliminate the risk of scalding
•An integrated pour spout to remove bath
fluid safely
3
Superior Ease of Use
•The detachable operating panel can be
attached via velcro or with a special
suspension at eye level for your
convenience from outside closed
fume hoods
•The patented evaporating flask clamp
Easy-Clip cannot be lost due to a
connection to the vapor tube
coupling ring
•The integrated screwed ring allows you
•For your convenience, the height
•The universal heating bath can be
•The optional automatic module
to remove sticking evaporating flasks
from the vapor tube just in seconds in a
safe manner
adjusted horizontally up to 200 mm and
offers efficient space to accommodate
even 5-liter flasks
of 160 mm and the angle of the
evaporating flask can be adjusted
easily from 20° to 80°
Distimatic Bench-top allows for
continuous and unattended
automatic operations
Reduced Cost of Ownership
•The chemical-resistant vacuum seal
reduces your spare parts budget up to
75 % with prolonged operational lifespan
•The patented clamping sleeve ensures
a long life performance of the vapor
tube
•Increase your range of applications by
using 5-liter flasks in the universal bath
at no added costs
•Maintenance-free and non-sparking
motors reduce repairs and down
times significantly to ensure years of
continuous operation
•The flange on the condenser side of the
drive is made of PPS (Polyphenylene
sulfide), a robust industrial-designed resin
with superior chemical resistance which
provides more chemical resistance than
stainless steel or welded aluminum. This
reduces corrosion to a minimum which
results in additional savings
on maintenance and replacement
components
•Only Hei-VAP heating baths reach a
temperature of 210 °C which is 30 °C
higher than other evaporators on the
market and allow for a broader range of
applications which previously could not
be performed on any rotary evaporator
(for example bitumen distillation). Thus,
increasing the range of applications
eliminates the need for investment in
other equipment
•Maximize your initial investment
significantly: the automatic module
Distimatic Bench-top is an affordable
and more flexible alternative to largescale rotary evaporators
•Reduce your maintenance costs. The
sealed housing protects your rotary
evaporator from aggressive fumes,
liquids and vapors to prevent internal
corrosion. This results in an increased
lifespan of 10 years on average at a
reduced maintenance and repair cost
•Spend your working hours more
effectively on other challenges which
require your attention and evaporate
large quantities continuously with the
automatic module Distimatic Bench-top
Spare parts costs
•Reduce your process times up to 30 %
Hei-VAP spare parts costs
Time
5
Intelligent
Evaporation
Vapor tube with patented clamping sleeve
YO UR ADVANTAGE S
•The patented clamping sleeve system allows
to remove the vapor tube easily from the drive
•Years of performance life reduce your spare
Leading Safety Standards
Superior Ease of Use
Reduced Cost of Ownership
The average operational lifespan of 10 years is backed by a 3 year warranty
and makes your purchase a worthwhile investment.
parts budget up to 75 %
•The Hei-VAP vapor tube does not get stuck in
the drive, thus eliminating the risk of broken
glass
The flange made of chemical-resistant
PPS reduces corrosion, maintenance and spare
parts cost to a minimum
•Immediate removal of the vapor tube from the
drive facilitates your work
Chemical-resistant vacuum
seal allows for years of
operation and reduces spare
parts budget up to 75 %
Non-sticking vapor tube with
patented clamping sleeve eliminates
broken glass and reduces spare parts
cost significantly
Patented flask clamp Easy-Clip
The patented Easy-Clip provides an easy
removal of sticking flasks and can´t get lost
due to the direct connection to the drive
YO UR ADVANTAGE S
•Easy-Clip can’t get lost due to a direct
connection to the drive
•The integrated screwing allows an easy
removal of sticking flasks
•The Easy-Clip is made of highly resistant
synthetic material which ensures a long life
performance
Safety bath will power off
if temperature overshoots
by 5 °C or runs dry
Bath power cable coupling
complies with protection
class IP 67 to prevent
corrosion and short
circuits
210 °C heating bath with
safety handles and pour
spout accommodates
5-liter flasks
Operating panel
YO UR ADVANTAGE S
•Changing all parameters from outside closed
fume hoods guarantees the highest safety
level
Detachable panel allows for the
highest operational safety
from outside closed fume
hoods
•Standard for all models is a panel with
1 m cable connection. Thus data security is
guaranteed at any time
•
Immediate access to the panel ensures
ultimate control of the process while
increasing your ease of use
•A separate on/off switch for heating prevents
Continuous unattended evaporation
without limits - the automatic module
Distimatic Bench-top with automatic
drainage of residue is an affordable and
more flexible alternative to large-scale
rotary evaporators
A separate on/off switch for heating
prevents unintentional heat-up – the
button is illuminated for visual control
A metal support between the
heating bath and the base unit
prevents bath instability
unintentional heat-up – the button is
illuminated for visual control
6
7
Hei-VAP Value / Hei-VAP Value Digital
Affordable model with hand lift for all standard applications
Includes leading safety standards and features for superior ease of use and reduced cost of
ownership, plus:
Hei-VAP Advantage
For your routine distillation applications and reproducible results
Includes leading safety standards and features for superior ease of use and reduced cost of
ownership, plus:
•The convenience of large dial controls for adjustment of rotation
•Available in hand lift or motor lift configurations
speed and bath temperature
•For limited budgets, we recommend the optional Manual
•Experience the advantages of our large digital 3.5“ LCD
vacuum controller
display which indicates rotation speed, heating bath and
vapor temperature
•Hei-VAP Value Digital models come with a digital display for
•We recommend the optional Manual vacuum controller
set and actual heating bath temperature
•Hei-VAP Value models have no digital display
•Experience the advantages of the automatic process
timer which turns off your evaporator at a preprogrammed time and removes evaporating flasks from
bath on motor lift models
Adjust the required angle
of the evaporating flask individually
according to your needs
•Upgrade your Hei-VAP Advantage to a Hei-VAP
Precision:
Upgrade-KIT
Advantage Precision-HL
P/N 036294700
Limit the height of your evaporating
flask in just seconds
Upgrade-KIT
Advantage Precision-ML
P/N 036294500
The patented flask clamp Easy-Clip
cannot get lost due to a connection
to the vapor tube coupling ring
Large digital LCD display
which allows you to monitor
all parameters
even from a distance
For your protection the
detachable operating
panel is located below the
bath and thus outside the
dangerous zone
Convenient motor lift
adjusts height by the press
of a button
Hei-VAP Advantage ML/G5B
P/N 036000510
Hei-VAP Value Digital HL/G1B
P/N 036000033
8
Model
Hei-VAP Value hand lift (HL)
Hei-VAP Value Digital hand lift (HL)
Model
Hei-VAP Advantage hand lift (HL)
Hei-VAP Advantage motor lift (ML)
Glassware
standard
coated
standard
coated
Glassware
standard
coated
standard
coated
G1 Diagonal
036000030
036000090
036000032
036000033
G1 Diagonal
036000150
036000250
036000350
036000450
G3 Vertical
036000050
036000110
036000052
036000053
G3 Vertical
036000170
036000270
036000370
036000470
G5 Dry Ice Condenser
036000070
036000130
036000072
036000073
G5 Dry Ice Condenser
036000210
036000310
036000410
036000510
G6 Vertical for Reflux
036000140
036000141
036000142
036000143
G6 Vertical for Reflux
036000230
036000330
036000430
036000530
9
Hei-VAP Precision
Most demanding applications and the finest integrated vacuum control capabilities
Includes leading safety standards and features for superior ease of use and reduced cost
of ownership, plus:
Programs facilitate process control
Reduce your process times significantly by using these three programs for automated
distillation
SETpressure
•Experience the advantages of our large
4.3” color graphic display which features all
parameters, integrated vacuum controller
and includes programs for automated
distillations
•Make your life easier by utilizing the
integrated software support which leads you
through the capabilities of the evaporator
•For data management Hei-VAP Precision
models feature a USB interface
•Save time by configuring the unit - all
•Now you can manage even the most
demanding applications easily and
prevent foaming, excessive bubbling or
bumping
•Save time with your individualized
pre-programmed parameter settings
for your 30 most common applications
used on a daily basis by saving them in a
”Favorites” section
•Each ramp offers 20 separate steps for
Program: SETpressure
•Apply an individual name to those ramps
to avoid a mix-up
Program for solvent separations
Control parameter: manually set pressure
demanding applications
1000 mbar
configurations
This program holds a pre-set vacuum constant. During the
evacuation you have the full flexibility to choose another
level of vacuum by the press of a button
•Experience the advantages of the
automatic process timer which turns off
your evaporator at a pre-programmed
time by raising the flask on motor lift
models and releasing vacuum
Manually set vacuum
•Control your process individually by pre-
AUTO easy
programming vacuum gradients
Program: AUTOeasy
•Hei-VAP Precision models feature a
built-in vacuum controller as a standard
connected devices will be recognized
by the evaporator, which eliminates the
need to configure the unit manually
Supports the automatic pressure control for solvent separations
Control parameter: pressure
1000 mbar
•Available in hand lift or motor lift
The pressure level for the first boiling point is found automatically.
This program can be used with all Heidolph glassware assemblies and
does not require any accessories
Finds boiling point automatically and holds vacuum constant
AUTO accurate
Program: AUTOaccurate
Supports very precise automatic pressure control for solvent
separations
Hei-VAP Precision ML/G3
P/N 036001270
For increased safety all bath
temperature adjustments can be
limited
1000 mbar
Control parameter: vapor temperature
Stop
Final vacuum individually adjustable
This program works similar to AUTOeasy but in addition is able to
identify multiple boiling points automatically by reducing vacuum
accordingly. Also the AUTOaccurate program delivers the finest and
most precise vacuum control. To take advantage of this program,
the optional AUTOaccurate-sensor is required. This program cannot
be used on Heidolph G1 and G5 glassware assemblies. Leading
parameter of this program is the vapor temperature
Finds multiple boiling points automatically
Even from a distance you will be
able to monitor the numbers on the
display easily
Large color graphic
display for all parameters
and automated programs
10
»» Reduce your process times via automated distillation programs
Model
Hei-VAP Precision
hand lift (HL)
Hei-VAP Precision
motor lift (ML)
Glassware
standard
coated
standard
coated
G1 Diagonal
036000950
036001050
036001150
036001250
G3 Vertical
036000970
036001070
036001170
036001270
G5 Dry Ice Condenser
036001010
036001110
036001210
036001310
G6 Vertical for Reflux
036001030
036001130
036001230
036001330
11
Hei-VAP Precision
for the highest level of accuracy
Vacuum Pumps
Advantages of all chemical-resistant diaphragm vacuum pumps
•All components which come in contact
with media are built from chemically
resistant fluoropolymer
•The durable PTFE design guarantees an
The advanced vacuum box with external vacuum sensor enables to reach
the highest level of accuracy:
superior diaphragm lifespan
•The head cover and clamping disc have
a stable core made of metal which offers
unsurpassed long-term performance of
your operational parameters
•The direct pump drive (without belt) is
exceptionally quiet, creates a very low
vibrational environment and reduces
the need of wear and tear parts to a
minimum
•The gas ballast valve has been optimized
to prevent media condensing
in the pump
RPM Regulated Vacuum Pumps
RPM regulated pumps adjust their speed individually and
come to a complete stop when the required vacuum level
is reached
YO UR ADVANTAGE S
•Speed adjustment stops
completely if vacuum is reached
and runs intermittently at very
low speed to hold vacuum
constant
•Increased diaphragm performance
life due to periods of nonoperation
Fully automatic control with speed adjustment
•Low energy consumption due to
Pressure
recovery rate
intermittent operation
•Significant noise and vibration
reduction due to periods of nonoperation
•Operates without vacuum valve
= continuous evaporation
Time
•Most precise vacuum level at all
times
»» Highest distillation rates possible and reducing process time by 30 %
»» Stable distillation conditions account for solvent recovery up to 100 %
12
13
RPM Regulated Vacuum Pumps
Rotavac Vario
Pumping Unit
Rotavac Vario
Tec
Valve-Regulated Vacuum Pumps
Rotavac Vario
Control
Standard vacuum pumps can be controlled manually or via valve operated vacuum
controllers
Rotavac
Valve Tec
Rotavac
Valve Control
Hei-VAC
Pump
•Recommended for solvents with •Suction capacity for up to 3 rotary •Two-stage diaphragm pump
low or medium boiling points
•
Three-stage diaphragm pump
•Precise vacuum control avoids bumping
and eliminates foaming for your
evaporation solution
•
Two-stage diaphragm pump
•Recommended for solvents with low or
medium boiling points
•Due to automatic vacuum supply to the
process parameter you have more time
for important laboratory activities
Recommended with Rotary Evaporator Model
14
Hei-VAP Value and Hei-VAP Advantage
•
Three-stage diaphragm pump
•Even if the gas ballast valve is open an
excellent ultimate vacuum is reached
when working with easily condensable
vapors. This makes distilling high
boiling point solvents such as DMF
or DMSO possible at low bath
temperatures
Hei-VAP Precision
evaporators at the same time
Part Number
036304780
036302830
036306570
Condenser Part Number
036304900
036302950
n/a
Optional Package choices
Valve-Tec w/ Manual Vacuum Controller
P/N 036304781
Can be combined with
a condenser
Yes
Yes
No
Vacuum Control
Manual Vacuum Controller
Manual Vacuum Controller
Manual Vacuum Controller
Maximum Pumping
Speed (m3/h)
0.75
2.0
1.3
Ultimate Vacuum (mbar)
12
7
2
Power input (W)
80
180
80
Weight (kg)
6.0
12.8
7.1
Dimensions (without
condenser) (L x W x H) (mm)
145 x 315 x 169
195 x 245 x 310
326 x 143 x 175
Manual/Digital
Manual
Manual
Manual
PC3001
Vario Pro
Hei-VAC
Basic Pump
PC510 NT
•Oil less diaphragm pump
•Recommended for medium-sized •Optimizes vacuum conditions
Hei-VAP Precision
Part Number
036308310
036308100
036308090
Condenser Part Number
036308110
036308110
036308110
Chemical-resistant
Yes
Yes
Yes
Can be combined with a condenser
Yes
Yes
Yes
Maximum Pumping Speed (m3/h)
1.7
1.0
1.7
Ultimate Vacuum (mbar)
5
12
2
Power input (W)
160
160
160
Weight (kg)
6
4.3
5.4
Dimensions (without condenser) (L x W x H) (mm)
263 x 193 x 156 x 236
156 x 236 x 196
167x 236x 196
provides a clean vacuum
vacuum applications involving
common solvents
automatically by precisely and
continuously adjusting the
diaphragm pump’s motor speed
036306585
036306562
036306581
Condenser Part Number
n/a
n/a
n/a
Optional Package choices
Hei-VAC Basic w/Valve & Manometer
P/N 036306569
Part Number
Can be combined with
a condenser
No
No
No
Vacuum Control
Manual Vacuum Controller
CVC 3000
CVC 3000
Maximum Pumping
Speed (m3/h)
1.9
2
2
Ultimate Vacuum (mbar)
15
7
2
Power input (W)
180
180
160
Weight (kg)
10.6
16.7
7.7
Dimensions (without
condenser) (L x W x H) (mm)
300 x 240 x 175
419 x 243 x 444
300 x 306 x 400
Manual/Digital
Manual
Digital
Digital
15
Chillers
Accessories
Hei-Therm
RL-720M
•1800 Viewing
radius swiveling
monitor enables
screen view from
any angle
•
Several temp and
interface options
•Intuitive large
Rotachill
•Quick cool down
times and small
coolant volumes
•Small footprint to
reduce lab space
•Temp/cooling
capacity for any
size evaporator
F250
•Environmentally-
friendly operation
with low energy
consumption
•Compact design
•Splash-proof
membrane keypad
w/LED temp
display
digital display
16
Rotachill Duo F1000
•Quick cool down
times and small
coolant volumes
Vapor temperature sensor
•Strong and transparent guard hood to
•Strong and transparent guard shield for
•For Hei-VAP Advantage and Hei-VAP
protect you from implosions
Provides easy and immediate access
to flask and bath
P/N 036305040
•
your protection while changing flasks
Attached at the edge of the bath
P/N 036305050
•
Precision
P/N 036308010
AUTOaccurate-sensor
Spare clamping sleeve
Spare PTFE vacuum seal
•For Hei-VAP Precision
•Only in combination with glassware set
P/N 036308030
P/N 036210030
•Splash-proof
membrane keypad
w/LED Temp
display
reduce lab space
capacity for any
size evaporator
Guard shield
•Compact design
•Small foot print to
•Temp/Cooling
Guard hood
•Straight forward
filling and draining
•
Filling level
indicator
Part Number
036500670
036306500
048100068
036306510
048100079
Recommended for 2 Evaporators
No
No
No
Yes
Yes
Working Temperature (C)
-20 to 135
-10 to 30
-10 to 40
-20 to 40
0 to 40
Max Pressure Flow Rate (l/
min)
12.8
13.2
15
13.2
23
Max Pressure (psi)
1.8
14.5
5.08
14.5
14.5
Cooling Capacity @ +200C (W)
200
420
250
1290
1000
Reservior Capacity (L)
7
2.65
2.6
2.65
9.5
Weight (kg)
38.052
27.7
27
27
44.9
Dimensions (without
condenser) (L x W x H) (mm)
541 x 221 x 645
489 x 244 x 419
240 x 400 x 520
489 x 244 x 419
376 x 490 x 640
G3 and G6
P/N 036308020
Spare vapor tube NS 24/40
P/N 036301110
Tube set
•Includes 6.25 meter vacuum tubing
(ID = 1/2 in - OD = 3/4 in) and
6.25 meter water tubing
(ID = 3/8 in - OD = 1/2 in)
P/N 036302180
Aqua-Stop
Heating bath liquid
Vacuum tubing
The integrated valve closes automatically
by turning off the evaporator. The system
saves money by reducing your consumption
of cooling tap water. Moreover the safety
mechanism avoids flouding in your
laboratory. (Only for Hei-VAP Advantage
and Hei-VAP Precision)
P/N 036302969
•Heating bath liquid up to 220 °C (5 L)
1 meter length
P/N 036251591
P/N 036300941
•
y-connector
P/N 036251591
17
Glassware
•Glassware set includes one 1,000-ml
evaporating flask and one 1,000-ml
receiving flask
with
•All glassware sets are also available
®
transparent plastic coating (Surlyn coated) for added safety, except for
glassware set G5 which is Halar-coated
Accessories
•Evaporating flasks and vapor tubes which •All glassware sets feature GL 10 thread;
come with a standard NS 29/32 joint size
are also available with NS 24/29 ground
joints
•Also available upon request: glassware
sets for Soxhlet extraction and
descending condenser system
the inlet tube can be connected with a
threaded fitting
•Glassware sets G3 and G6 allow for
the automated distillation program
AUTOaccurate on Hei-VAP Precision
models
Evaporating flasks
NS 29/32
NS 24/40
Evaporating flask* 50 ml
036302280
036302270
Evaporating flask 100 ml
036302300
036302290
Evaporating flask 250 ml
036302320
036302310
Evaporating flask 500 ml
036302340
036302330
Evaporating flask 1,000 ml
036301150
036301160
Evaporating flask 2,000 ml
036302380
036302370
Evaporating flask 3,000 ml
036302400
036302390
Evaporating flask 5,000 ml
036305010
036305000
Receiving flasks
standard
coated
Receiving flask - NS 35/20 100 ml
036302480
036302490
036302500
036302510
* Evaporating flask NS 14.5 incl. adaptor (NS 29 or NS 24)
Glassware set G1
Glassware set G3
Receiving flask - NS 35/20 250 ml
Receiving flask - NS 35/20 500 ml
036302520
036302530
•Diagonal condenser for all standard distillations; the option
•Vertical condenser for all standard distillations; the
Receiving flask - NS 35/20 1,000 ml
036301170
036301180
Receiving flask - NS 35/20 2,000 ml
036302570
036302580
Receiving flask - NS 35/20 3,000 ml
036302590
036302600
with the most affordable price
18
option with the smallest space requirement
Glassware set G5
Glassware set G6
•Dry Ice condenser for low-boiling solvents
•Vertical condenser; centerpiece with valve for reflux
distillation
Powder flasks
NS 29/32
NS 24/40
Powder flask 500 ml
036302220
036302210
Powder flask 1,000 ml
036302240
036302230
Powder flask 2,000 ml
036302260
036302250
Spider
NS 29/32
NS 24/40
Spider with 6 distillation sleeves NS 14,5 20 ml
036302620
036302610
Spider with 12 distillation sleeves NS 14,5 20 ml
036302640
036302630
Spider with 20 distillation sleeves NS 14,5 20 ml
036302660
036302650
Spider
NS 29/32
NS 24/40
Spider with 5 flasks NS 24 50 ml
036302760
036302750
Spider with 5 flasks NS 24 100 ml
036302780
036302770
Evaporating cylinder
NS 29/32
NS 24/40
Evaporating cylinder 500 ml
036302420
036302410
Evaporating cylinder 1,500 ml
036302440
036302430
Foam brake
NS 29/32
NS 24/40
Foam brake with flask clamp
036302460
036302470
19
Vacuum Accessories
Equipment Combinations
Switchbox
Manual vacuum controller
Vacuum valve
Connect up to 3 rotary evaporators to
one vacuum pump
For Hei-VAP Value and Hei-VAP
Advantage
Required to control vacuum for
Hei-VAP Precision models with
valve-regulated pumps
Rotary Evaporator
Vacuum source
Accessories
included
Rotavac Vario
Pumping Unit
not required
Vacuum controller
Vacuum valve
Rotavac Valve Control
Rotavac Valve Tec
optional
Manual vacuum
controller
House vacuum
Hei-VAP Value / Hei-VAP Value Digital
included
Switchbox
P/N 036308080
Manual vacuum controller
P/N 036308000
Vacuum valve
P/N 036308070
•Connect up to 3 rotary evaporators
•Control your house vacuum or any
•External attachment design for easy
to one pump and control vacuum
individually
•Pump switches off automatically at
required vacuum
•Reduces energy consumption of pump
•Increases performance life of the pump
due to a complete switch-off if vacuum
is reached
•Vacuum valve and non-return valve
are required for every evaporator if you
work with different pressures at the
same time
•Delivery includes 3 non-return valves
•Designed for Hei-VAP Precision
•Weight: 0.6 kg
•Dimensions: L80 / W160 / H45 mm
other vacuum source
•Pressure range from 0 to 1,020 mbar
•Scaling on display in steps of 50 mbar
•Connection for tubes with 8 mm inner
Rotavac Vario
Pumping Unit
not required
Rotavac Valve Control
cleaning
Rotavac Valve Tec
•Can be combined with the Woulff
Bottle to one unit
•Not required if you utilize a Manual
optional
optional
Vacuum controller
Vapor temperature sensor
(all glassware sets)
Vacuum valve
Manual vacuum
controller
Vapor temperature sensor
House vacuum
(all glassware sets)
Hei-VAP Advantage
vacuum controller
diameter
included
•Support rod included
•A vacuum valve is not required
•Dimensions: L80 / W80 / H150 mm
Rotavac Valve Control
Woulff bottle
required
Rotavac Valve Tec
P/N 036302940
optional
House vacuum
Vacuum valve
Autoaccurate-sensor
(glassware G3/G6 only)
Vapor temperature sensor
(all glassware sets)
•
Additional recovery of solvent to
protect vacuum valve and vacuum
pump
included
•Compatible with all Hei-VAP
Rotavac Vario Control
configurations
Rotavac Vario Tec
not required
optional
•Direct connection to the vacuum valve
is possible
Vacuum controller
Vacuum controller
Vacuum valve
Autoaccurate-sensor
(glassware G3/G6 only)
Vapor temperature sensor
(all glassware sets)
Hei-VAP Precision
•Features connection to vacuum
controller
•Volume of 250 ml
Rotavac Valve Control
with
condenser
20
Rotavac Valve Tec
with
condenser
Rotavac Vario Control
with
condenser
Rotavac Vario Tec
with
condenser
Rotavac Vario
Pumping Unit
with condenser
Manual vacuum
controller
Vacuum valve
with Woulff bottle
AUTOaccuratesensor
Vapor
temperature sensor
21
Hei-Therm Circulator Baths
Heated Circulators
The Heidolph Hei-Therm circulator baths are designed to help scientists with their
rigorous temperature control requirements. Each unit is designed to give optimal control,
reproducibility, and an intuitive operator interface. Pick from 3 different interface
controllers depending on your applications and data control requirements.
Open Bath Circulators
•
•Rotating Display for Ease of Use
PC 8-M open
bath circulator
PC-14M open
bath circulator
PC-28M open
bath circulator
SS-6M open
bath circulator
SS-10M open SS-28M open
bath circulator bath circulator
Part Number
036500010
036500040
036500070
036500100
036500140
036500170
036500200
Working Temperature (C)
+10 to 135
+10 to 85
+10 to 85
+10 to 85
+10 to 135
+10 to 135
+10 to 135
Temp Stability (C)
+/- 0.07
+/- 0.07
+/- 0.07
+/- 0.07
+/- 0.07
+/- 0.07
+/- 0.07
Pump Type
Pressure
Pressure
Pressure
Pressure
Pressure
Pressure
Pressure
Pump Speeds
One
One
One
One
One
One
One
Reservior/Tank Material
Stainless Steel
Polycarbonate
Polycarbonate
Polycarbonate
Stainless Steel
Stainless Steel
Stainless Steel
Reservior Capacity (L)
28
8
14
28
6
10
28
Weight (kg)
4.53
7.248
10.872
25.368
9.06
17.667
29.898
Dimensions
(without condenser)
(L x W x H) (mm)
109 x 97 x 358
322 x 207 x 441
532 x 208 x 441
562 x 345 x 441
340 x 206 x 406
353 x 342 x 406
531 x 342 x 457
Heated Circulators
footprint
HL-15AD
circulator
HL-28AD
circulator
HL-7AP
circulator
HL-15AP
circulator
HL-28AP
ciruclator
036500270
036500400
036500330
036500460
036500570
036500370
036500500
036500610
Working Temperature (C)
+10 to 135
+10 to 135
+10 to 200
+10 to 200
+10 to 200
+10 to 200
+10 to 200
+10 to 200
Temp Stability (C)
+/- 0.07
+/- 0.07
+/- 0.01
+/- 0.01
+/- 0.01
+/- 0.01
+/- 0.01
+/- 0.01
Pump Type
Pressure
Pressure
Pressure/
Suction
Pressure/
Suction
Pressure/
Suction
Pressure/
Suction
Pressure/
Suction
Pressure/
Suction
Pump Speeds
One
One
Variable
Variable
Variable
Variable
Variable
Variable
Reservior/Tank Material
Stainless Steel
Stainless Steel
Stainless Steel
Polycarbonate
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
PolyTemp
Viewer,
USB driver
PolyTemp
Viewer, TDMS
file viewer, USB
driver, Excel
Program Generator, PolyTemp
Remote iPhone
application
PolyTemp
Viewer, TDMS
file viewer, USB
driver, Excel
Program Generator, PolyTemp
Remote iPhone
application
PolyTemp Viewer,
TDMS file viewer,
USB driver, Excel
Program Generator, PolyTemp
Remote iPhone
application
•Intuitive large digital display
with programmable Time vs.
Temperature ramps on AP models
•Heat/Chemical Resistant Top Plate
DuraTop™
PolyTemp
Viewer,
USB driver
Included Software
M immersion
circulator
•Compact design provides small
HL-7AD
circulator
Heat/Chemical Resistant Cover Plate
•Large and Easy to Use Display
monitor enables screen view from
any angle
HL-15M
circulator
•
Stainless steel or polycarbonate
baths, sizes from 6 to 28 liters
•180° Viewing Radius Swiveling
Part Number
HL-7M
circulator
•Immersion cooling coil cutouts on
Top Plate
Reservior Capacity (L)
7
15
7
15
28
7
15
28
Weight (kg)
16.308
25.368
19.026
28.086
37.146
19.026
28.086
37.146
Dimensions
(without condenser)
(L x W x H) (mm)
499 x 221 x 437
569 x 368 x 452
499 x 221 x 409
569 x 368 x 422
672 x 457 x 422
499 x 221 x 409
569 x 368 x 422
672 x 457 x 422
Refrigerated Circulators
•180° Viewing Radius Swiveling
monitor enables screen view from
any angle
•
Intuitive large digital display
with programmable Time vs.
Temperature ramps on AP models
•Heat/Chemical Resistant Top Plate •Several temperature and interface
DuraTop™
options
•Energy Efficient WhisperCool™
technology reduces noise and
energy consumption
RL-720M
refrigerated
circulator
RL-720AD
refirgerated
circulator
RL-1540AD
refrigerated
circulator
RL-2830AD
refrigerated
circulator
RL-720AP
refirgerated
circulator
RL-1540AP
refrigerated
circulator
RL-2830AP
refrigerated
circulator
Part Number
036500670
036500740
036500850
036500960
036500780
036500890
036501000
Working Temperature (C)
-20 to 135
-20 to 200
-40 to 200
-30 to 200
-20 to 200
-40 to 200
-30 to 200
Nominal Cooling Capacity
@ +20C (W)
200
200
1000
915
200
1000
915
Temp Stability (C)
+/- 0.07
+/- 0.01
+/- 0.01
+/- 0.01
+/- 0.01
+/- 0.01
+/- 0.01
Pressure/
Suction
Pressure/
Suction
Pressure/
Suction
Pressure/
Suction
Pump Type
Pressure
Pressure
Pressure/
Suction
Pump Speeds
One
One
Variable
Variable
Variable
Variable
Variable
Reservior/Tank Material
Stainless Steel
Stainless Steel
Stainless Steel
Polycarbonate
Stainless Steel
Stainless Steel
Stainless Steel
PolyTemp Viewer,
TDMS file viewer,
USB driver, Excel
Program Generator, PolyTemp
Remote iPhone
application
Included Software
22
PolyTemp
Viewer,
USB driver
PolyTemp
Viewer,
USB driver
PolyTemp
Viewer,
USB driver
PolyTemp
Viewer,
USB driver
PolyTemp Viewer,
TDMS file viewer,
USB driver, Excel
Program Generator, PolyTemp
Remote iPhone
application
Reservior Capacity (L)
7
7
15
28
7
15
28
Weight (kg)
38.052
40.77
53.454
66.138
40.77
53.454
66.138
Dimensions
(without condenser)
(L x W x H) (mm)
541 x 221x 645
541 x 221 x 617
569 x 368 x 683
672 x 457 x 683
541 x 221 x 617
569 x 368 x 683
569 x 368 x 683
23
Technical Specifications - Rotary Evaporators
Model
Hei-VAP Value
"The Collegiate" (HL)
"The Collegiate"
Digital (HL)
Hei-VAP
Advantage (HL)
Hei-VAP
Advantage (ML)
Hei-VAP
Precision (HL)
Hei-VAP
Precision (ML)
Hand / Motor lift
hand lift
hand lift
motor lift
hand lift
motor lift
Height adjustment speed
manual
manual
30 mm/s
manual
30 mm/s
Height adjustment (mm)
155
155
155
155
155
Rotation speed (rpm)
10 – 280
10 – 280
10 – 280
10 – 280
10 – 280
scale
3.5" LCD display
3.5" LCD display
4.3" LCD color graphic display
4.3" LCD color graphic display
Rotation speed setting
Drive brushless DC motor with electronic speed control
Heating capacity (W)
1,300
1,300
1,300
1,300
1,300
Temp. range heating bath (°C)
20 – 210
20 – 210
20 – 210
20 – 210
20 – 210
Temperature accuracy bath (°C)
±1
±1
±1
±1
±1
Overheat protection bath (°C)
cut-off at 5 °C over set temperature via separate Pt 1000
Bath temperature setting****
scale / digital
3.5" LCD display
3.5" LCD display
4.3" LCD color graphic display
4.3" LCD color graphic display
Heating bath temperature control
electronic / digital
electronic / digital
electronic / digital
electronic / digital
electronic / digital
250
250
250
250
250
stainless steel AISI 316L
stainless steel AISI 316L
stainless steel AISI 316L
stainless steel AISI 316L
stainless steel AISI 316L
(mm)
255
255
255
255
255
(L)
4.5
4.5
4.5
4.5
4.5
Secondary overtemp. cut-off (°C)
Material heating bath
Diameter heating bath Volume heating bath Display vapor temperature
Cer ti f i cate
no
required accessories
yes
yes
yes
yes
vapor temperature sensor
vapor temperature sensor
vapor temperature sensor
vapor temperature sensor
Integrated vacuum controller
no
no
no
yes
yes
Timer
no
yes
yes
yes
yes
To confirm the ability for
continuous operation
of the Hei-VAP series Rotary Evaporators
Vacuum program SETpressure**
no
no
no
yes
yes
Vacuum program AUTOeasy**
no
no
no
yes
yes
Vacuum program AUTOaccurate**
requires AUTOaccurate-sensor
no
no
no
yes
yes
- Lift
no
no
yes
no
yes
- Start rotation
yes
yes
yes
yes
yes
- Start vacuum
no
no
no
yes
yes
- Start heating bath
yes
yes
yes
yes
yes
accordance with the operation manual and in accordance with good practice standards
Programmable ramps
no
no
no
yes
yes
for safety in laboratories, rules for accident preventions, and compliance with directions
on hazardous materials.
1,400
1,400
1,400
1,400
1,400
Weight (w/o glassware assembly) (kg)
16
16
16
17
17
Dimensions with glassware set G3 (l x w x h) (mm)
739 x 490 x 887
739 x 490 x 887
739 x 420 x 887
739 x 490 x 887
739 x 420 x 887
Protection class*** (DIN EN 60529)
IP 20
IP 20
IP 20
IP 20
IP 20
Operating conditions (°C)
0 - 40 at 80 %
0 - 40 at 80 %
0 - 40 at 80 %
0 - 40 at 80 %
0 - 40 at 80 %
rel. humidity
rel. humidity
rel. humidity
rel. humidity
rel. humidity
- Toluene
8.5
8.5
8.5
8.5
8.5
- Acetone
5.8
5.8
5.8
5.8
5.8
- Ethanol
3.5
3.5
3.5
3.5
3.5
1.2
1.2
1.2
1.2
1.2
1,200
1,200
1,200
1,200
1,200
Rate of evaporation* (W)
This statement is made under the precondition that all units are operated in
(L/h)
- Water
Condensing surface to DIN EN 61010-1:2001 and DIN EN 61010-2-010:2003 and therefore is designed for
continuous operation.
Remote control function
Supply power Hei-VAP series Rotary Evaporators feature overtemperature safety circuits according
2
(cm )
S c h w a b a c h ,
J a n u a r y
2 0 1 5
*
DT of 40 °C between heating bath temperature and boiling temperature
** Only in combination with vacuum systems
*** IP 67 cable connection on heating bath
****Hei-VAP Value Digital: digital display
Standard supply voltage: 230 V - other voltages upon request, please specify for order
24
i. V. Kurt Jelinek
Development & Production Manager
i. V. Andrea Nißlbeck
Quality Control Manager
25
Hei-Lab App
Heidolph North America
1241 Jarvis Avenue • Elk Grove Village, IL 60007
Phone 224-265-9600 • Fax 224-265-9611
[email protected] • www.heidolphNA.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement