Product Instructions

Product
Instructions
IP Ready™ Series
SM75CF2N, ISM75CFN
Before attempting to connect or operate this product,
please read these instructions completely.
81-IN5376
12/20/06
--
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating instructions should be read
before the unit is operated.
2. Retain Instructions - The safety and operating instructions should be retained
for future reference.
3. Heed Warnings - All warnings on the unit and in the operating instructions
should be adhered to.
4. Follow Instructions - All operating & user instructions should be followed.
5. Electrical Connections - Only a qualified electrician should make electrical
connections.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Cable Runs - All cable runs must be within permissible distance. 8. Mounting - This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the unit. Accordingly:
a. Installation should be made by a qualified installer.
b. Installation should be in compliance with local codes.
c. Care should be exercised to select suitable hardware to install the unit,
taking into account both the composition of the mounting surface and
the weight of the unit. Be sure to periodically examine the unit and the
supporting structure to make sure that the integrity of the installation
is intact. Failure to comply with the foregoing could result in the unit
separating from the support structure and falling, with resultant damages
or injury to anyone or anything struck by the falling unit.
UNPACKING
Unpack carefully. Electronic components can be damaged if improperly handled
or dropped. If an item appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper. Be sure to save:
1. The shipping carton and packaging material. They are the safest material in
which to make future shipments of the equipment.
2. These Installation and Operating Instructions.
SAFETY PRECAUTIONS
!
Caution
Risk of
Electric Shock!
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT EXPOSE
COMPONENTS TO WATER OR MOISTURE.
The lightning flash with an arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of non-insulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
!
The exclamation point within an equilateral triangle is
intended to alert the user to presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
SERVICE
If the unit ever needs repair service, customer should contact Videolarm
(1-800-554-1124) for return authorization & shipping instructions.
TECHNICAL SUPPORT
Videolarm has set-up a 24 hour technical support line for their customers.
24 HOUR TECHNICAL SUPPORT
1-800-554-1124
LIMITED WARRANTY FOR VIDEOLARM INC. PRODUCTS
VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship, as follows:
PRODUCT CATEGORY PARTS LABOR
All Enclosures and Electronics Three (3) Years Three (3) Years
Pan/Tilts Three (3) Years **6 months if used in autoscan
Three (3) Years **6 months if used in autoscan
Poles/PoleEvators
Three (3) Years Three (3) Years
Warrior/Q-View/I.R. Illuminators Five (5) Years
Five (5) Years
Controllers Three (3) Years
Three (3) Years
Power Supplies
Three (3) Years
Three (3) Years
Accessory Brackets Three (3) Years
Three (3) Years
During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Videolarm Inc. Decatur GA.
The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with a RMA # (Return Materials
Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support Team at 800.554.1124, extension 101.
Videolarm will return the repaired Product freight prepaid to Purchaser. Videolarm is not obligated to provide Purchaser with a substitute unit during the warranty
period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or parts charges.
The limited warranty stated in these product instructions is subject to all of the following terms and conditions:
1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice
with an explanation of the claim shall be given promptly by Purchaser to Videolarm but all claims for warranty service must be made within the warranty period.
If after investigation Videolarm determines that the reported problem was not covered by the warranty, Purchaser shall pay Videolarm for the cost of investigating
the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period as to the entire
Product. The specific warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that part or the
remaining period of the Product parts warranty, whichever is greater.
2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair
any Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.
3. EXCEPTIONS TO LIMITED WARRANTY: Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during
the warranty period which is subjected to any of the following: abuse, improper use: negligence, accident, lightning damage or other acts of God (i.e., hurricanes,
earthquakes), modification, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance
procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the Product. Furthermore, Videolarm shall have no liability where a schedule is specified for regular replacement or maintenance or cleaning of certain parts (based on usage)
and the end-user has failed to follow such schedule; attempted repair by non-qualified personnel; operation of the Product outside of the published environmental
and electrical parameters, or if such Product’s original identification (trademark, serial number) markings have been defaced, altered, or removed. Videolarm
excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS” (i.e., without any warranty of any kind), except where
expressly provided otherwise in any documentation or license agreement furnished with the Product.
4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.
DISCLAIMER OF WARRANTY EXCEPT FOR THE FOREGOING WARRANTIES, VIDEOLARM HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH REGARD TO ANY CLAIM
OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. VIDEOLARM HEREBY DISCLAIMS
ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-VIDEOLARM PRODUCTS OR NON-VIDEOLARM RECOMMENDED PRODUCTS
PURCHASER CHOOSES TO CONNECT TO PRODUCT.
LIMITATION OF LIABILITY THE LIABILITY OF VIDEOLARM, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND WHATSOEVER,
REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH
SUCH CLAIM IS MADE. IN NO EVENT SHALL VIDEOLARM BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.
--
SM75C2N
IP Ready Network Housing
ASSEMBLING THE UNIT:
IP Ready Housing with 24Vac input, surface mounting, heater
& blowers, ready for standard IP PTZ and fixed cameras.
Outdoor model (SM75CF2N) includes: (1) 100Va, 24Vac
transformers.
1. Remove content from all boxes.
Contents should include:
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):
!
Power 24Vac, Class 2 Only
Total Power: 80 watts (max)
Accessories (Heater/Blower): 52 watts
Heater:50 watts
Blower: 2 watt
Camera Power: 26 watts (See camera specifications.)
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
!
Main Housing Assembly
Be sure the bracket is properly and securely mounted
to a supporting structure capable of rigidly holding
the weight of the entire unit.
FRONT SIDE OF
THE HOUSING
Dome Assembly - Clear or Tinted
Do not remove the protective film until the product is
assembled and installed.
BOTTOM CONDUIT
HOLE LOCATION
SIDE CONDUIT HOLE
LOCATION
3 Packet Assemblies
--
Wiring Color Code
Power and Control Inputs
(Outside of housing)
INSTALLING CAMERA
1. Choose direction you wish to point the camera.
2. Install fixed camera bracket using (2) ¼ x 20 bolt + washer + lock
washer.
3. Attach camera to fixed bracket.
4. Attach power wire (red/black) from power supply.
SM75CF2N ONLY
POWER
1
Camera Power (24 VAC)
Red
2
Camera Power (24 VAC)
Orange
3
Accessory Power (24 VAC)
Yellow
4
Accessory Power (24 VAC)
Green
} 27 watts
!
} 26 watts
NOTE: Maximum power output for camera power
supply is 1.25 amps at 12Vdc
Power Connections
(Inside of housing)
Camera power supply
(SM75CF2N only)
SM75CF2N ONLY
POWER AND CONTROL LEADS
1
Power (12 vdc)
Red
2
Power (12 vdc)
Black
The outdoor unit is setup with (2) individual power inputs.
1. Accessory Power (yellow and green wire)
2. Camera Power (red and orange)
DC power for camera
(red & black wires)
If you wish to provide a single power transformer it is recommended that:
!
Be aware total power consumption
of housing is 53 watts
24k VAC Wiring Distances
The following are the recommended maximum distances for 24 VAC
with a 10% voltage drop (10% is generally the maximum allowable
voltage drop for AC powered devices).
2. Check the supplied wiring chart to be sure that you have the
proper gauge wire for the distance that you intend to run your
power wires.
Wire Gauge
Total vA
consumed
3. Bring power to the 3 and 4 position of the power connector
(yellow and green wire)
4. Two jumpers are provided in the housing packet. Jumper from
the 1st position to the 3rd position and from the 2nd position to the
4th position of the terminal block. Be careful not to short between
the yellow and green wires.
Add 2 jumpers for
single power input
Figure 5
--
5.5
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
22
250
120
89
65
44
35
29
25
31
19
17
16
14
13
12
11
11
10
9
9
8
20
400
180
141
90
70
56
47
40
34
31
28
25
23
21
20
18
17
16
15
14
14
18
600
300
225
130
112
90
75
64
55
50
45
41
37
34
32
30
28
26
25
23
22
16
960
480
358
225
179
143
119
102
85
79
71
65
59
55
51
47
44
42
39
37
35
14
12
10
800 1300 571 905 1440
350 525 830
285 452 720
228 362 576
190 301 480
163 258 411
140 215 340
126 201 320
114 181 288
103 164 261
95 150 240
87 139 221
81 129 205
76 120 192
71 113 180
67 106 169
63 100 160
60
95 151
57
90 144
Maximum distance from transformer to load
1. INSTALLING THE HOUSING ASSEMBLY:
!
CONNECTING THE TRIM RING ASSEMBLY TO THE
HOUSING TOP:
Be sure the bracket is properly and securely mounted
to a supporting structure capable of rigidly holding
the weight of the entire unit.
INSTALLING WALL MOUNT
1. There is a safety lanyard that is attached to the inside of
the dome assembly. Take the open end of the lanyard and
loop it around the lanyard tab that is located inside the
housing top.
2.000" MIN.
2. The safety lanyard is now attached to the trim ring.
CARE AND CLEANING OF DOMES:
2.000
All SM75 units include an optically clear polycarbonate dome.
The dome is an optical device and should be handled with
extreme care. Leave protective film on dome until product is
fully assembled and installed. Even though the dome is virtually
unbreakable, it can be easily scratched.
Clean only with a clean cotton cloth and warm water.
DO NOT use a strong solvent or cleanser!
--
Exploded View for Replacement Parts
9
15
8
12
13
5
16
(1)
14
11
7
(1)
10
(4)
8
(2)
5
6
9
(1)
17
(2)
4
(3)
(1)
(2)
3
(2)
(2)
(1)
(4)
(8)
(1)
2
18
(3)
(1)
(4)
1
(4)
(4)
(3)
--
(1)
(4)
(1)
(4)
(1)
(4)
(3)
(1)
Exploded View for Replacement Parts (Surface Mount)
14
15
13
12
6
Fixed Camera Bracket
Replacement Parts List
Part Number
Description
1
RPSM7501
DOME SEAL
2
RPRH7502
LOWER TRIM RING
3
RC7T
TINTED REPLACEMENT CAPSULE
RC7C
CLEAR REPLACEMENT CAPSULE
4
RPRH7503
DOME CLAMPING BRACKET
5
RPFD060
CAMERA BRACKET
6
RPFD080
(12VDC) BLOWER (USED IN 24V HGS)
7
RPFD072
24VAC HEATER
8
RPNET01
NETWORK CAMERA BRACKETS
9
RPNET02
NETWORK HGS POWER BOARD
RPFD050 (Model SM7HB)
CONNECTION PCB
RPRH706 (Model SM7FHB)
CONNECTION PCB (FIXED MODELS)
RPRH707 (Model SM7NHB)
CONNECTION PCB (NETWORK MODELS)
11
RPSM7511
HOUSING TOP
12
RPSM7512
MOUNTING HOLE CLOSURE
13
RPSM7513
CONDUIT HOLE CLOSURE
14
RPSN7514
WALL MOUNT BRACKET
15
RPSM75040
HOUSING HARDWARE
16
RPPKH2090
HOUSING HARDWARE PACKET A
17
RPPKH2071
HOUSING HARDWARE PACKET B
18
RPPKE1100
ELECTRICAL PACKET
N/S
RPPKE1125
ELECTRICAL PACKET, HB, FIXED NETWORK
10
--