Sensor Actuator Interface Active

Sensor Actuator Interface Active
Contents
SAI Active
Sensor Actuator Interface Active
SAI Active
Introduction
C.2
SAI Active Universal
C.6
SAI Active Universal – PROFIBUS-DP
C.8
SAI Active Universal – DeviceNetTM
C.16
SAI Active Universal – CANopen
C.18
SAI Active Universal – Modbus TCP
C.22
SAI Active Universal – EtherNet/IP
C.24
SAI Active Universal – PROFINET
C.26
Industrial Ethernet
C.28
SAI Active Universal Pro
C.34
SAI Active Universal Bluetooth
C.44
AS-Interface Modular
C.48
AS-Interface Line
C.50
C.1
C
Introduction
SAI Active
SAI bus systems – Overview
SAI Active Universal
SAI Active Universal Pro
Universal compact modules
Extendable I/O-System
C
SAI Bluetooth
Wireless compact modules
SAI Active AS-Interface
SAI AS-Interface Line
Modular plug-on modules
Narrow compact modules
C.2
USB
Introduction
SAI Active
SAI Active family
The SAI-Active family encompasses fieldbus components for
PROFIBUS-DP, DeviceNet™, CANopen, Modbus TCP,
Ethernet IP, Profinet® and AS-Interface and supports the aim of
entirely modular and decentralised industrial automation
extending from the lowest field level to the control level.
Automation technology with this kind of structure is transparent,
efficient and cost effective. To fully benefit from the cost-saving
effects of fieldbus-networked I/O systems, the input and/or
output units should be distributed “locally” directly where the
process operates. Modules with IP67 ingress protection class
are for use in environments with high levels of harmful
substances and moisture.
The various product series are designed for different applications. The Line series is of very compact design so that the
devices find space even for applications in restricted conditions.
The modularity of the hood-type distribution boards gives users
the advantage of installing the electronics and connection level
separately and being able to choose the right I/O configuration,
fieldbus and connection type for the respective requirements.
The Universal family wins over through extended diagnostic
capabilities and modern design and is equipped for the latest
requirements.
The Extension Pro supports special functions and enables
considerably more I/O points per fieldbus node. The Extension
IO modules are designed especially small for this.
The following manuals are available for ordering. The EDS and
GSD files will be made available for download on the Weidmüller
home page (www.weidmueller.com).
Manuals
Order No.
Universal
PROFIBUS-DP, German
5651720000
PROFIBUS-DP, English
CANopen, German
CANopen, English
5651730000
5655370000
5655310000
5655330000
5655320000
5659470000
DeviceNet, German
DeviceNet, English
Modbus TCP, German
Modbus TCP, English
Universal Pro
PROFIBUS-DP, German
5659480000
PROFIBUS-DP, English
Bluetooth
Bluetooth-PB, German
Bluetooth-PB, English
5663590000
5663600000
1071640000
1073380000
EDS files
File name
Universal DeviceNet™
SAI-AU M12 DN 16DI
WI190670.EDS
SAI-AU M12 DN 16DI/8DO
SAI-AU M12 DN AI/AO/DI
SAI-AU M8 DN 16DI
WI190671.EDS
WI190672.EDS
WI190673.EDS
SAI-AU M8 DN 16DI/8DO
Universal Ethernet IP
SAI-AU M12 EIP 16DI
WI190674.EDS
SAI-AU M12 EIP 16DI/8DO
SAI-AU M12 EIP AI/AO/DI
SAI-AU M8 EIP 16DI
WI190691.EDS
WI190692.EDS
WI190693.EDS
SAI-AU M8 EIP 16DI/8DO
Universal Pro DeviceNet™
WI190694.EDS
SAI-AU M12 DN GW 16DI
Universal CANopen
SAI-AU M12 CAN 16DI
WI193857.EDS
SAI-AU M12 CAN 16DI/8DO
SAI-AU M12 CAN AI/AO/DI
SAI-AU M8 CAN 16DI
SAI-AU M8 CAN 16DI/8DO
WI190666.EDS
WI190667.EDS
WI190668.EDS
WI190669.EDS
WI190690.EDS
WI190665.EDS
GSD files
File name
Universal Profibus-DP
SAI-AU M12 PB AI/AO/DI
WIAU09D1.GSD
SAI-AU M12 PB 16DI/8DO
SAI-AU M12 PB 16DI
SAI-AU M8 PB 16DI/8DO
SAI-AU M8 PB 16DI
SAI-AU M12 PB 8I8O 2A
WIAU09D2.GSD
WIAU09D3.GSD
WIAU09D4.GSD
WIAU09D5.GSD
WIAU0AAB.GSD
SAI-AU M8 PB 8I8O 2A
Universal Pro
SAI-AU M12 PB GW 16DI
WIAU0B60.GSD
SAI-AU M8 PB GW 16DI
Universal Bluetooth
WIAU0A74.GSD
SAI-AU M12 GW PB/BT 12I
WIAU0A75.GSD
WIAU0A74.GSD
C.3
C
Introduction
SAI Active
Engineering table for PROFIBUS with M12
When planning the automation of a facility, you must have a
wide variety of components available. This engineering table
provides you, on one page, with all the relevant information
from each Universal Pro component.
C
PROFIBUS Gateway
Ordering data
Order No.
Gateway PROFIBUS-DP
PROFIBUS cables
Extension IO modules
Sub-Bus cables
1890020000
16DI/8DO
1890010000
SAI-AU M12 PB 16DI/8DO
4AI/2AO/4DI
SAI-AU M12 PB AI/AO/DI
DP terminating resistor
1890000000
SAIEND PB M12 5P B-COD
PROFIBUS-DP cable, both ends
0.3 m
SAIL-M12GM12G-PB-0.3D
1784770000
1873310030
1.5 m
3.0 m
5.0 m
10 m
15 m
25 m
30 m
SAIL-M12GM12G-PB-1.5D
SAIL-M12GM12G-PB-3.0D
SAIL-M12GM12G-PB-5.0D
SAIL-M12GM12G-PB-10D
SAIL-M12GM12G-PB-15D
SAIL-M12GM12G-PB-25D
SAIL-M12GM12G-PB-30D
1873310150
1873310300
1873310500
1873311000
1873311500
1873312500
1873313000
40 m
SAIL-M12GM12G-PB-40D
PROFIBUS-DP cable, only with connector (socket)
0.5 m
SAIL-M12BG-PB-0.5D
1873314000
1.5 m
3.0 m
SAIL-M12BG-PB-1.5D
SAIL-M12BG-PB-3.0D
1873320150
1873320300
10 m
15 m
SAIL-M12BG-PB-10D
SAIL-M12BG-PB-15D
1873321000
1873321500
1873320050
25 m
SAIL-M12BG-PB-20D
PROFIBUS-DP cable, only with connector (male plug)
0.5 m
SAIL-M12G-PB-0.5D
1873322000
1.5 m
3m
5m
10 m
15 m
1873300150
1873300300
1873300500
1873301000
1873301500
SAIL-M12G-PB-1.5D
SAIL-M12G-PB-3.0D
SAIL-M12G-PB-5.0D
SAIL-M12G-PB-10D
SAIL-M12G-PB-15D
1873300050
20 m
SAIL-M12G-PB-20D
PROFIBUS connector for self-connection
Stecker (male plug)
SAISM 5/8S M12 5P B-COD
1873302000
Plug/socket
SAIBM 5/8S M12 5P B-COD
Extension IO modules M12
8 DI
SAI-AU M12 SB 8DI
1784780000
1938610000
8 DO 2A
8DI/8DO (optional)
2 counters
4 AI
4AO
4PT100
1938680000
1938640000
1938730000
1938690000
1938700000
1938710000
SAI-AU M12 SB 8DO 2A
SAI-AU M12 SB 8DIO
SAI-AU M12 SB 2COUNTER
SAI-AU M12 SB 4AI
SAI-AU M12 SB 4AO
SAI-AU M12 SB 4PT100
1784790000
1938720000
4 Thermo
SAI-AU M12 SB 4THERMO
Sub-Bus cables with straight connectors on both ends
0.3 m
SAIL-M8GM8G-4S-0.3Q-SB
1981900030
1.0 m
1.5 m
3.0 m
5.0 m
10 m
15 m
SAIL-M8GM8G-4S-1.0Q-SB
SAIL-M8GM8G-4S-1.5Q-SB
SAIL-M8GM8G-4S-3.0Q-SB
SAIL-M8GM8G-4S-5.0Q-SB
SAIL-M8GM8G-4S-10Q-SB
SAIL-M8GM8G-4S-15Q-SB
1981900100
1981900150
1981900300
1981900500
1981901000
1981901500
20 m
SAIL-M8GM8G-4S-20Q-SB
Sub-Bus terminating resistor
1981902000
SAIEND CAN M8 4P
C.4
1938550000
16DI
SAI-AU M12 PB GW 16DI
Stand-alone modules for PROFIBUS-DP
16DI
SAI-AU M12 PB 16DI
1955340000
Introduction
SAI Active
SAI Active Universal – Standards
The SAI Universal Family is tested according to the strictest
industrial standards. These tests take place in accredited
laboratories. Before the sealing test, the modules are subjected
to an aging process.
Conforming to EMC directives
Testing standard
EN 610000-4-2 (ESD)
Test result
Criterion B
EN 610000-4-3 (Immunity to radiated interference)
EN 610000-4-4 (Burst)
EN 610000-4-5 (Surge)
EN 610000-4-6 (Immunity to conductive disturbances)
EN 610000-4-8 (Magnetic field 50 Hz)
Criterion A
Criterion B
Criterion B
Criterion A
Criterion A
EN 61000-4-11 (Voltage drop)
Criterion A
C
Mechanical tests
Testing standard
Test result
Resistance to vibration, acc. to EN 60068-2-6
Sinusoidal vibrations
10...150 Hz, 0.75 mm and 100 m/s2
Schock testing with 300 m/s2
und 9 ms
Continuous shock testing with
250 m/s2 and 6 ms
Schock test, acc. to EN 60068-2-27
Schock test, acc. to EN 60068-2-29
Climate tests
Testing standard
Test result
EN 60529
Protection class IP 67
(test after 168 hours aging at
+85 °C and 2 h at –25 °C)
operational, 0 °C;
non-operational, –25 °C
operational, +60 °C;
non-operational, +85 °C
operational, –25 °C … 55 °C
non-operational, –25 °C … 55 °C
EN 60068-2-1 cold
EN 60068-2-2 dry and warm
EN 60068-2-30 Moist and warm non-condensing
Temperature fluctuation acc. to IEC 60068-2-14
operational, –40 °C … 70 °C
non-operational, –40 °C … 80 °C
UL standards
Testing standard
Test result
UL 508
USL/CNL – 1 and 4X type rating
for accessories for Programmable
Controllers
Hosedown test, Icing Test
(enclosure marked Type 4, 4X)
UL 50
C.5
SAI Active Universal
SAI Active
SAI Active Universal
2 No. MultiCard
markers or 1 No. 40 mm
long strip for printing IP addresses
2-hole mounting and functional
earth connection
C
Status LEDs for voltage
fieldbus and group diagnosis
M12 or M8 round connectors
with metal threaded ring
I/O LEDs for input and output
status, plus individual channel
diagnosis
2 No. M12 round connectors
for voltage supply
2 No. M12 round connectors
for fieldbusses
Illuminated configuration
area for fieldbus address
and plug-in cross connects
for voltages
The SAI-Active Universal range is the result of the many years of
experience Weidmüller has gained with distributors for industry.
Besides the established fieldbus systems – PROFIBUS-DP,
DeviceNet™ and CANopen – the range also includes Industrial
Ethernet modules. The following Ethernet dialects are
supported:
• EtherNet/IP
• Modbus TCP
• Profinet
The housing has been tailored to the demands of industry.
That is why it is resistant to aggressive cleaning agents,
vibration, shocks and heat, and is sealed against water and
dust ingress.
Connection technology
The concept behind the new distributors promotes rapid and
simple installation in harsh environments.
Conventional, standardised M8 and M12 connectors form the
backbone of the Weidmüller connection concept. Robust metal
C.6
Transparent marker strips:
• one marker for each I/O point
• illuminated markers
• PrintJet compatible
Just 54 mm wide
threaded rings plus standard pin assignments ensure safety
and fewer mistakes during wiring. Two M12 connections are
provided for the fieldbus – there is no need for an external
T-piece and the modules can be easily interconnected. As
specified in the standards, B-coding is used for PROFIBUS-DP,
A-coding for DeviceNet™ and CANopen. The functional earth
is easy to connect thanks to a metal clip in the fixing hole.
Secure contact is created automatically when the module is
screwed to an earthed metal base. In other situations there is
sufficient space at the screw position for a round cable lug for
connecting an earthing cable.
Two central fixing holes ensure simple and reliable mounting.
The configuration area for the module is situated below the
transparent cover. Two rotary switches are provided for setting
the fieldbus addresses – up to max. 126 for PROFIBUS-DP.
SAI Active
SAI Active Universal
Power supply
Labelling
The modules can be supplied with up to four different
voltages. In addition to the module voltage, which is also used
for the inputs, three supply terminals are available for
the outputs. The outputs can also be switched off separately to
suit the application. Two cross connects provide the option of
bridging the electrical power supply.
A marker is available for every I/O channel as well as two
markers for the module as a whole. The markers do not have
to be fitted individually on the I/O side. Marker strips offer the
added advantage of rapid installation. An additional 40 mm
wide marker has been specially adapted to suit the module.
This allows longer texts such as markings with up to 40
characters to be fitted and clearly read without hindrance.
Diagnosis
Every I/O channel is constantly scanned for errors. If an error
is detected, this is indicated directly at the connection and a
signal is sent via the fieldbus. The individual channel diagnostics
is complemented by a module diagnosis for overvoltages,
short-circuits and the fieldbus.
Outputs
Illumination concept
The illuminated configuration area is still unique and represents a
very interesting feature. It indicates that the module is on
and operating. Furthermore, it is easier to see the two rotary
switches for setting the fieldbus addresses.
I/O statuses are indicated by means of cleverly designed
optical fibres arranged like arrowheads. These point in
the direction of the markings and connectors. The light also illuminates the corresponding marker, which allows it to be quickly
and clearly read under working conditions. In addition, the voltage supplies, group diagnostic messages and fieldbus statuses
are indicated by means of seven status indicators.
The outputs are short-circuit-proof and protected against
polarity reversal. Two outputs which can be operated with
max. 2 A output power are available for high-performance
actuators. The 16DI/8DO allows the user to customise the
configuration to suit the application as well as choose
between 16DI and 8DI/8DO.
Analogue modules
The analogue Universal Pro module is uniquely versatile. The
configuration between current and voltage is selected via
the configuration software of the master. Further connection
options, e.g. PT 100, are possible with Jackpac®. These
modules are simply installed between distributor and sensor
to convert the signals.
The module can accept additional digital inputs.
Complementary products
Cables and accessories provide a perfect finish to the
Weidmüller range of distributors. A MultiCard is included
with each module for marking purposes. The new M12
blanking plugs can now be fitted more easily manually and
with the correct torque using the Weidmüller Screwty tool.
Two additional slots allow the plug to be fitted with either a
small or large slotted screwdriver.
C.7
C
SAI Active Universal – PROFIBUS-DP
SAI Active
The PROFIBUS-DP system
C
Principle
Maximum system extension
PROFIBUS-DP is a master–slave system consisting of one
master (usually implemented in the PLC) and up to 31 slaves
per segment. During operation, the master constantly
interrogates the slave stations. Several masters can also be
integrated within one network to relay the transmission
authorisation (token passing). PROFIBUS-DP uses a physical
layer based on the RS 485 standard which has performed
excellently in industrial applications.
PROFIBUS-DP can accommodate max. 32 devices per
segment. One segment corresponds to a subsection between
two repeaters. If no repeaters are used, the complete network
corresponds to one segment. The following table indicates
the maximum extension options.
The system uses a shielded, twisted pair cable and is
extremely resistant to electrical interference. PROFIBUS-DP
is suitable for connecting a large number of I/O points. Up
to 126 addressable subscribers enable the connection of
thousands of analogue and digital I/O points within a network.
Every PROFIBUS-DP module has a so-called GSD file which
contains detailed information about the module (I/O data
volume, possible transmission rates, update status, etc.).
The station GSD file is required in order to configure a station
within the PROFIBUS-DP system.
The GSD files are available on the Weidmüller website at
www.weidmueller.com.
Bus extension
Transmission
rate
Length of bus line
Stub cable length
Total segment
No. of repeaters
(max.)
9.6 kBit/s
1200 m
6.6 m
7
19.2 kBit/s
93.75 kBit/s
187.5 kBit/s
500 kBit/s
1.5 MBit/s
1200 m
1200 m
1200 m
400 m
200 m
6.6 m
6.6 m
6.6 m
6.6 m
6.6 m
7
7
7
7
4
12 MBit/s
100 m
preferably none
4
Max. 126 nodes can be addressed at all transmission rates.
The maximum extension with 7 repeaters is 9.6 km (8 x 1.2 km).
Addressing
The address setting for the corresponding station is set
manually by means of two coded rotary switches.
Transmission rate
Network structure
The network is a line structure with an active bus terminator
at both ends. To activate the bus terminator, in the PG version
the connector box must be pulled out of the bus terminator
and the switch set to position 1.
The M12 version uses a bus terminator connector
(order No. 1784770000).
The transmission rate must be identical throughout the
whole network, and is defined by the master. The bps rate
is compared automatically upon switching on. No adjustments
need to be made at the module.
At 12 Mbps the typical response time is < 1 ms per
1000 I/O points.
The bps rate cannot be changed during operation!
Ideally, there should be no stub cables; Weidmüller modules
have two special connections for the fieldbus.
C.8
SAI Active Universal - PROFIBUS-DP
SAI-AU
SAI-AU
M8
M12
SAI Active
PROFIBUS-DP Universal
C
Ordering data
Type
IO variants
8 digital inputs / 8 digital outputs
16 digital inputs
16 digital inputs / 8 digital outputs
Order No.
Type
SAI-AU M8 PB 8DI8DO 2A
Qty.
1
1975450000
SAI-AU M12 PB 8DI8DO 2A
1
1968220000
SAI-AU M8 PB 16DI
1
1906550000
SAI-AU M12 PB 16DI
1
1890020000
SAI-AU M8 PB 16DI/8DO
1
1906640000
SAI-AU M12 PB 16DI/8DO
1
1890010000
SAI-AU M12 PB AI/AO/DI
1
1890000000
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Qty.
Order No.
Note
Technical specifications of bus system
Bus user
Transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Slave
Max. 12 Mbps
red
RS 485
Yes
Rotary switch 1-125
automatic
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Analogue outputs
Analogue inputs
Resolution
Accuracy
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
0.5, 2.0 A
Short-circuit-protected
10 A
TYPE 1 to EN 61131-2
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
12-bit
< 0.2 %
Note
Accessories
Plug
Type
Qty.
Order No.
Metal plug, Male M12, B-coded, straight
SAISM 5/8S M12 5P B-COD
1
1784790000
Metal plug, Socket M12, B-coded, straight
SAIBM 5/8S M12 5P B-COD
1
1784780000
Connecting plug in M12 Plug
SAIEND PB M12 5P B-COD
1
1784770000
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Note
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Voltage supply with standard M12 plug-in connectors (see Chap. D)
C.9
SAI Active Universal - PROFIBUS-DP
PROFIBUS-DP-VA
plug-on module
SAI-HS DP VA
SAI Active
Circular plug IP69K
C
Ordering data
IO variants
Type
8 inputs / 8 outputs
Note
SAI HS DP 8DI/8DO VA
Qty.
1
Order No.
Type
Qty.
Order No.
1889760000
VA plug-in connectors on p. D.8
Technical specifications of bus system
Bus user
Transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Slave
Max. 12 Mbps
red
RS 485
Yes
Rotary switch 1-99
automatic
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
(Indication via) UL
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Input current at „0“ min.
Input current at „1“
Switching thresholds
E/A function indicator
Sensor voltage indicator
V4A
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 69 k
24.0 V DC (20.4...28.8 V)
LED green (UL)
2.0 A (derating)
Short-circuit-protected
8A
TYPE 1 to EN 61131-2
< 1.5 mA
> 2 mA
9V
LED red/green (Uq)
LED red/green (Ui)
Note
Accessories
Plug
Note
C.10
Type
Qty.
Order No.
Stainless steel plug, Socket PG 9, straight
SAIB 5/9-VA
1
1920710000
Stainless steel plug, Socket PG 9, straight
SAIB 5/9-VA-B-COD
1
1920730000
Stainless steel plug, Male PG 9, straight
SAIS 5/9-VA
1
1920700000
Stainless steel plug, Male PG 9, straight
SAIS 5/9-VA-B-COD
1
1920720000
C
C.11
SAI Active
SAI Active Universal – PROFIBUS-DP
SAI Active
Sub-D
This compact connector provides a convenient bus connection
for all standardised PROFIBUS-DP devices. A data transmission
rate of max. 12 Mbps is possible. An additional Sub-D
connector on top of the plug enables analysis/programming
devices to be connected without modifying the wiring.
C
PB-DP SUB-D
The 9-pin sub-D connector is available in four versions:
1.without terminating resistor
2.with built-in terminating resistor
3.with switch-in terminating resistor and connection for
programming unit via IDC connection
4.with switch-in terminating resistor and connection for
programming unit via tension clamp connection.
X1
Print terminal
B
A
• T-piece functions
• Good shield contact
• Ample space for connecting the bus cable
• Cable entry can be closed off with blanking panel
• Fully insulated housing
• Reliable strain relief
C.12
L2
3
B
A
L3
L4
Shielding on cable
Shielding on housing
Ordering data
Data transmission rate
ESD
Operating temperature
Storage temperature
Ingress protection class
Dimensions (LxWxH)
Housing material
Plug-in connector
Cable connection
Cable diameter
Single conductor cross-section
Note
L1
8
Technische Daten
Type of connection
X2
D-Sub, male
Type
PB-DP SUB-D
max. 12 Mbps
°C
°C
mm
mm
mm2
Screw
IDC
Tension clamp
protection to IEC 801-2
0 ... 60
-25 ... +80
IP 40
64.6 x 47.5 x 16
PC UL 94 V-1
sub-D 9-pin
2 No. horizontal
4.5 ... 8
rigid
flexible
8395500000 and 8460860000
1916980000
1934200000
max. 1.5
max. 1.0
Qty.
1
Order No.
8395500000
SAI Active Universal – PROFIBUS-DP
SAI Active
Sub-D
PB-DP SUB-D TERM
PB-DP SUB-D IDC/ZF TERM PS
C
X1
Print terminal
X2
D-Sub, male
+ 5V
X1
Print terminal
B
6
B
A
3
A
R1
L1
390 Ohm
S1
220 Ohm
B
R3
390 Ohm
A
6
6
2
5
3
3
3 1
4 6
R1
390 Ohm
R2
220 Ohm
8
8
L4
R3
390 Ohm
5
5
Switch setting
Off
right
Shielding on housing
Ordering data
Type
PB-DP SUB-D TERM
X3
D-Sub, female
L3
5
Shielding on cable
X2
D-Sub, male
L2
8
R2
+ 5V
Shielding on cable
Shielding on housing
Ordering data
Qty.
1
Order No.
8460860000
Type
PB-DP SUB-D IDC TERM PS
PB-DP SUB-D ZF TERM PS
Qty.
1
Order No.
1919680000
1
1934200000
C.13
SAI Active Universal – PROFIBUS-DP
PROFIBUS-DP cables
one end without connector
SAI Active
M12
M8
M5
ZW
PUR/TPE
PUR/PVC
PVC/PVC
Shielded
Halogen
C
PUR / TPE
Ordering data
Male, straight
2-pole
PVC / PVC
2-pole
Type
Order No.
Type
Order No.
1.5 m
SAIL-M12G-PB-1.5D
1873300150
SAIL-M12G-PB-1.5E
1058530150
3.0 m
SAIL-M12G-PB-3.0D
1873300300
SAIL-M12G-PB-3.0E
1058530300
5.0 m
SAIL-M12G-PB-5.0D
1873300500
SAIL-M12G-PB-5.0E
1058530500
10.0 m
SAIL-M12G-PB-10D
1873301000
SAIL-M12G-PB-10E
1058531000
1.5 m
SAIL-M12W-PB-1.5D
1061970150
SAIL-M12W-PB-1.5E
1062340150
3.0 m
SAIL-M12W-PB-3.0D
1061970300
SAIL-M12W-PB-3.0E
1062340300
5.0 m
SAIL-M12W-PB-5.0D
1061970500
SAIL-M12W-PB-5.0E
1062340500
10.0 m
SAIL-M12W-PB-10D
1061971000
SAIL-M12W-PB-10E
1062341000
1.5 m
SAIL-M12BG-PB-1.5D
1873320150
SAIL-M12BG-PB-1.5E
1058540150
3.0 m
SAIL-M12BG-PB-3.0D
1873320300
SAIL-M12BG-PB-3.0E
1058540300
5.0 m
SAIL-M12BG-PB-5.0D
1873320500
SAIL-M12BG-PB-5.0E
1058540500
10.0 m
SAIL-M12BG-PB-10D
1873321000
SAIL-M12BG-PB-10E
1058541000
1.5 m
SAIL-M12BW-PB-1.5D
1062300150
SAIL-M12BW-PB-1.5E
1062370150
3.0 m
SAIL-M12BW-PB-3.0D
1062300300
SAIL-M12BW-PB-3.0E
1062370300
5.0 m
SAIL-M12BW-PB-5.0D
1062300500
SAIL-M12BW-PB-5.0E
1062370500
10.0 m
SAIL-M12BW-PB-10D
1062301000
SAIL-M12BW-PB-10E
1062371000
Type
Order No.
Male, angled
Socket, straight
Socket, angled
Other versions on request
Other versions on request
Technical data
Core cross-section
Contact surface
Temperature range
Rated voltage
(acc. to VDE standard 0110 ISO group C)
0.34 mm²
gold-plated
-20 ... 60 °C
30 V
M12x1
L
M12x1
47
18
Ø 14,6
44
C.14
L
18
18
IP 67
Ø 14,6
L in the drawing is the cable length
37
L
37
PUR/ TPE
L
Protection class
magenta (RAL 4008)
18
Material
35
Sheathing colour
Dimensioned drawing
32
Note
M12x1
M12x1
Ø 14,6
Ø 14,6
SAI Active Universal – PROFIBUS-DP
M12
M8
M5
ZW
PUR/TPE
PUR/PVC
PVC/PVC
Shielded
Halogen
SAI Active
PROFIBUS-DP cables
Connecting cables
C
PUR / TPE
Ordering data
Male, straight - Socket, straight
2-pole
PVC / PVC
2-pole
Type
Order No.
Type
Order No.
1.5 m
SAIL-M12GM12G-PB-1.5D
1873310150
SAIL-M12GM12G-PB-1.5E
1058570150
3.0 m
SAIL-M12GM12G-PB-0.3D
1873310030
SAIL-M12GM12G-PB-3.0E
1058570300
5.0 m
SAIL-M12GM12G-PB-5.0D
1873310500
SAIL-M12GM12G-PB-5.0E
1058570500
10.0 m
SAIL-M12GM12G-PB-10D
1873311000
SAIL-M12GM12G-PB-10E
1058571000
1.5 m
SAIL-M12GM12W-PB-1.5D
1062310150
SAIL-M12GM12W-PB-1.5E
1062380150
3.0 m
SAIL-M12GM12W-PB-3.0D
1062310300
SAIL-M12GM12W-PB-3.0E
1062380300
5.0 m
SAIL-M12GM12W-PB-5.0D
1062310500
SAIL-M12GM12W-PB-5.0E
1062380500
10.0 m
SAIL-M12GM12W-PB-10D
1062311000
SAIL-M12GM12W-PB-10E
1062381000
1.5 m
SAIL-M12WM12W-PB-1.5D
1062330150
SAIL-M12WM12W-PB-1.5E
1062400150
3.0 m
SAIL-M12WM12W-PB-3.0D
1062330300
SAIL-M12WM12W-PB-3.0E
1062400300
5.0 m
SAIL-M12WM12W-PB-5.0D
1062330500
SAIL-M12WM12W-PB-5.0E
1062400500
10.0 m
SAIL-M12WM12W-PB-10D
1062331000
SAIL-M12WM12W-PB-10E
1062401000
Type
Order No.
Male, straight - Socket, angled
Male, angled - female socket, angled
Note
Other versions on request
Other versions on request
Technical data
Sheathing colour
Material
Protection class
Dimensioned drawing
magenta (RAL 4008)
37
L
37
PUR/PUR
L
18
18
IP 67
gold-plated
Temperature range
-5 ... 80 °C
M12x1
L
M12x1
47
18
Ø 14,6
44
Ø 14,6
L
30 V
18
Rated voltage
(acc. to VDE standard 0110 ISO group C)
35
Contact surface
32
Core cross-section
M12x1
M12x1
Ø 14,6
Ø 14,6
L in the drawing is the cable length
C.15
SAI Active Universal – DeviceNetTM
SAI Active
The DeviceNet™ system
C
Principle
Addressing
DeviceNetTM is a fieldbus system from the USA that is being
increasingly employed in Europe and Asia. In terms of the
physical layers 1 and 2 of the ISO 7-layer model, DeviceNet™
is based on CAN (Controller Area Network).
Any address from 1 to 63 is possible. The address setting of
the station can be set manually at the device or via the master.
Two coded rotary switches are located underneath the cap,
with separate adjustment of tens and units.
The ISO application layer (layer 7) in DeviceNet™ makes use
of the so-called “Common Industrial Protocol” (CIP). This is
an open standard which is also used for ControlNet™ and
Ethernet/IP. In the future this will enable permanent communi‑
cation between the field level and the Internet.
DeviceNet™ is a multi-master system and its protocol
prioritises the data traffic in such a way that I/O signals have
a higher priority than configuration data.
Every DeviceNet™ module has a so-called EDS file (Electronic
Data Sheet), containing an exact description of the module.
All information about I/O and status data required by a master,
e.g. a PLC or IPC, are saved in this file and can be used to
integrate the module step by step into the control program.
The EDS files are available for downloading on the Weidmüller
website at www.weidmueller.com.
Network structure
ISO 11898 prescribes a line structure for the DeviceNet™
network.
A line structure has a terminating resistor of 120 Ω at each end.
A bus terminator connector (order No. 1784760000) can be
plugged into the “Bus OUT” output socket of the Weidmüller
DeviceNet™ SAI distributors.
Ideally, there should be no stub cables; Weidmüller modules
have two special connections for the fieldbus. The number of
subscribers is limited to 63.
C.16
Bus line length, transmission rate
The maximum length of the bus line depends on the transmission rate (baud rate). The following table serves as a guide
for an optimum bus design:
Max. bus expansion in m
500
Data rate in kbps
125
250
250
100
500
DeviceNet™ (M12 A-coded)
Pin
1
Assignment
shield
2
3
4
5
Vplus
CAN-GND
CAN-H
CAN-L
Housing
shield
SAI Active Universal - DeviceNetTM
SAI-AU
SAI-AU
M8
M12
SAI Active
DeviceNetTM Universal
C
Ordering data
IO variants
Type
16 digital inputs
16 digital inputs / 8 digital outputs
Order No.
Type
SAI-AU M8 DN 16DI
Qty.
1
1906730000
SAI-AU M12 DN 16DI
1
1906700000
SAI-AU M8 DN 16DI/8DO
1
1906740000
SAI-AU M12 DN 16DI/8DO
1
1906710000
SAI-AU M12 DN AI/AO/DI
1
1906720000
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Qty.
Order No.
Note
Technical specifications of bus system
Bus user
Transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Slave
Max. 500 kbps
red
RS 485
Yes
Rotary switch 1-63
automatic
Note
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Analogue outputs
Analogue inputs
Resolution
Accuracy
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
0.5, 2.0 A
Short-circuit-protected
8A
TYPE 1 to EN 61131-2
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
12-bit
< 0.2 %
UL certification in preparation
Accessories
Plug
Type
Qty.
Order No.
Terminating resistor in M12 plug
SAIEND CAN-M12 5P A-COD
1
1784760000
Metal plug, Male M12, 5-pole, shield A-coded
SAIS-M-5/8S M12 5P A-COD
1
1784740000
Metal plug, Socket M12, 5-pole, shield A-coded
SAIB-M-5/8S M12 5P A-COD
1
1784750000
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Note
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Voltage supply with standard M12 plug-in connectors (see Chap. D)
C.17
SAI Active Universal – CANopen
SAI Active
The CANopen system
Principle
C
A CAN network is based on a serverclient principle with a serial bus conne‑
cting network subscribers having equal
access status. The electrical connection
consists of a twisted pair cable with or
without shielding depending on the
application.
CANopen was defined as a uniform
protocol for networking the different
CANopen subscribers. The protocol
stipulates the significance of the data
for the corresponding device type (e.g.
I/O modules, drives, shaft encoders,
controls).
This means it is now easy for application
programmers to use all types of
CANopen-compatible components
irrespective of the manufacturer.
CANopen subscribers in the same device
series organise their data in the same
way. The characteristics of these device
classes are summarised in “device
profiles”.
An object directory is defined in
CANopen nodes and describes all device
parameters. This is used not only for
device description but also as a data
access interface by other CANopen
devices.
Larger, non-time-critical data quantities
are transmitted using “service data
objects” (SDO). In addition, at least
two “process data objects” (PDO) are
available for transmitting process data.
Manufacturer-specific objects and other
functions are described in the manual.
Every CANopen module has a so-called
EDS file (Electronic Data Sheet) containing an exact description of the module.
C.18
All information about I/O and status data
required by a master, e.g. a PLC or IPC,
are saved in this file and can be used
to integrate the module step by step into
the control program.
The EDS files are available for downloading on the Weidmüller website at
www.weidmueller.com.
Network structure
ISO 11898 prescribes a line structure for
the CANopen network. A line structure
has a terminating resistor of 120 ohms at
each end.
Addressing
Any address from 1 to 126 is possible
with CANopen. The address is set by
means of two coded rotary switches in
the module.
Bus line length, transmission rate
The maximum length of the bus line
depends on the transmission rate (bps
rate). The following table serves as a
guide for an optimum bus design:
Bus expansion
Max. bus expansion
7000 m
Data rate in kbps
10
The cable gland version of the Weidmüller
CANopen SAI distributors have an internal
switch for activating the terminating
resistor.
3500 m
600 m
300 m
90 m
20
125
250
500
40 m
1000
The M12 version has a bus terminator
connector (order No. 1784760000).
Ideally, there should be no stub cables;
Weidmüller modules have two special
connections for the fieldbus.
CANopen (M12 A-coded)
Pin
1
Assignment
shield
2
3
4
5
not used
CAN-GND
CAN-H
CAN-L
Housing
shield
SAI Active Universal - CANopen
SAI-AU
SAI-AU
M8
M12
SAI Active
CANopen Universal
C
Ordering data
IO variants
Type
16 digital inputs
16 digital inputs / 8 digital outputs
Order No.
Type
SAI-AU M8 CAN 16DI
Qty.
1
1906680000
SAI-AU M12 CAN 16DI
1
1906650000
SAI-AU M8 CAN 16DI/8DO
1
1906690000
SAI-AU M12 CAN 16DI/8DO
1
1906660000
SAI-AU M12 CAN AI/AO/DI
1
1906670000
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Qty.
Order No.
Note
Technical specifications of bus system
Bus user
Transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Slave
Max. 1 Mbps
red
RS 485
Yes
Rotary switch 1-125
automatic
Note
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Analogue outputs
Analogue inputs
Resolution
Accuracy
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
0.5, 2.0 A
Short-circuit-protected
8A
TYPE 1 to EN 61131-2
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
12-bit
< 0.2 %
UL certification in preparation
Accessories
Plug
Type
Qty.
Order No.
Terminating resistor in M12 plug
SAIEND CAN-M12 5P A-COD
1
1784760000
Metal plug, Male M12, 5-pole, shield A-coded
SAIS-M-5/8S M12 5P A-COD
1
1784740000
Metal plug, Socket M12, 5-pole, shield A-coded
SAIB-M-5/8S M12 5P A-COD
1
1784750000
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Note
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Voltage supply with standard M12 plug-in connectors (see Chap. D)
C.19
SAI Active Universal – CANopen
CAN/DeviceNet cables
one end without connector
SAI Active
M12
M8
M5
ZW
PUR/TPE
PUR/PVC
PVC/PVC
Shielded
Halogen
C
PUR / TPE
Ordering data
Male, straight
2-pole
PVC / PVC
2-pole
Type
Order No.
Type
Order No.
1.5 m
SAIL-M12G-CD-1.5A
1964700150
SAIL-M12G-CD-1.5B
1060110150
3.0 m
SAIL-M12G-CD-3.0A
1964700300
SAIL-M12G-CD-3.0B
1060110300
5.0 m
SAIL-M12G-CD-5.0A
1964700500
SAIL-M12G-CD-5.0B
1060110500
10.0 m
SAIL-M12G-CD-10A
1964701000
SAIL-M12G-CD-10B
1060111000
1.5 m
SAIL-M12W-CD-1.5A
1062220150
SAIL-M12W-CD-1.5B
1062170150
3.0 m
SAIL-M12W-CD-3.0A
1062220300
SAIL-M12W-CD-3.0B
1062170300
5.0 m
SAIL-M12W-CD-5.0A
1062220500
SAIL-M12W-CD-5.0B
1062170500
10.0 m
SAIL-M12W-CD-10A
1062221000
SAIL-M12W-CD-10B
1062171000
1.5 m
SAIL-M12BG-CD-1.5A
1964690150
SAIL-M12BG-CD-1.5B
1060120150
3.0 m
SAIL-M12BG-CD-3.0A
1964690300
SAIL-M12BG-CD-3.0B
1060120300
5.0 m
SAIL-M12BG-CD-5.0A
1964690500
SAIL-M12BG-CD-5.0B
1060120500
10.0 m
SAIL-M12BG-CD-10A
1964691000
SAIL-M12BG-CD-10B
1060121000
1.5 m
SAIL-M12BW-CD-1.5A
1061980150
SAIL-M12BW-CD-1.5B
1062180150
3.0 m
SAIL-M12BW-CD-3.0A
1061980300
SAIL-M12BW-CD-3.0B
1062180300
5.0 m
SAIL-M12BW-CD-5.0A
1061980500
SAIL-M12BW-CD-5.0B
1062180500
10.0 m
SAIL-M12BW-CD-10A
1061981000
SAIL-M12BW-CD-10B
1062181000
Type
Order No.
Male, angled
Socket, straight
Socket, angled
Other versions on request
Other versions on request
Technical data
Contact surface
Temperature range
Rated voltage
(acc. to VDE standard 0110 ISO group C)
gold-plated
-10 ... 80 °C
30 V
M12x1
L
M12x1
47
18
Ø 14,6
44
C.20
L
18
18
Ø 14,6
L in the drawing is the cable length
37
L
37
IP 67
2 x 0.34 + 2 x 0.22 mm2
L
Core cross-section
black
18
Protection class
35
Sheathing colour
Dimensioned drawing
32
Note
M12x1
M12x1
Ø 14,6
Ø 14,6
SAI Active Universal – CANopen
M12
M8
M5
ZW
PUR/TPE
PUR/PVC
PVC/PVC
Shielded
Halogen
SAI Active
CAN/DeviceNet cables
connecting cables
C
PUR / TPE
Ordering data
Male, straight - Socket, straight
2-pole
PVC / PVC
2-pole
Type
Order No.
Type
Order No.
1.5 m
SAIL-M12GM12G-CD-1.5A
1964710150
SAIL-M12GM12G-CD-1.5B
1060130150
3.0 m
SAIL-M12GM12G-CD-3.0A
1964710300
SAIL-M12GM12G-CD-3.0B
1060130300
5.0 m
SAIL-M12GM12G-CD-5.0A
1964710500
SAIL-M12GM12G-CD-5.0B
1060130500
10.0 m
SAIL-M12GM12G-CD-10A
1964711000
SAIL-M12GM12G-CD-10B
1060131000
1.5 m
SAIL-M12GM12W-CD-1.5A
1061990150
SAIL-M12GM12W-CD-1.5B
1062190150
3.0 m
SAIL-M12GM12W-CD-3.0A
1061990300
SAIL-M12GM12W-CD-3.0B
1062190300
5.0 m
SAIL-M12GM12W-CD-5.0A
1061990500
SAIL-M12GM12W-CD-5.0B
1062190500
10.0 m
SAIL-M12GM12W-CD-10A
1061991000
SAIL-M12GM12W-CD-10B
1062191000
1.5 m
SAIL-M12WM12W-CD-1.5A
1062150150
SAIL-M12WM12W-CD-1.5B
1062210150
3.0 m
SAIL-M12WM12W-CD-3.0A
1062150300
SAIL-M12WM12W-CD-3.0B
1062210300
5.0 m
SAIL-M12WM12W-CD-5.0A
1062150500
SAIL-M12WM12W-CD-5.0B
1062210500
10.0 m
SAIL-M12WM12W-CD-10A
1062151000
SAIL-M12WM12W-CD-10B
1062211000
Type
Order No.
Male, straight - Socket, angled
Male, angled - female socket, angled
Other versions on request
Other versions on request
Technical data
Contact surface
Temperature range
Rated voltage
(acc. to VDE standard 0110 ISO group C)
37
L
37
IP 67
L
18
18
2 x 0.34 + 2 x 0.22 mm2
gold-plated
-10 ... 80 °C
30 V
M12x1
L
M12x1
47
18
Ø 14,6
44
Ø 14,6
L
Core cross-section
black
18
Protection class
35
Sheathing colour
Dimensioned drawing
32
Note
M12x1
M12x1
Ø 14,6
Ø 14,6
L in the drawing is the cable length
C.21
SAI Active Universal – Modbus TCP
SAI Active
Modbus TCP
C
Principle
Bus extension/transmission rate
Modbus TCP is a fieldbus system for automation technology
based on Ethernet TCP/IP. It has been accepted by the Internet
Engineering Task Force (IETF) as a draft RFC standard and has
been made available for all to use by Schneider Automation.
Modbus TCP is based on Modbus, a well established industrial
application protocol. The Modbus object models remain
unchanged.
The transmission rate is 10 or 100 Mbps. Weidmüller modules
detect the transmission rate automatically and set themselves
accordingly. The maximum length of the bus cable is the same
for both transmission rates.
A connection is set up via TCP/IP by the server (e.g. I/O
device) being addressed via port number 502. Commands are
initiated by the client (Master) and executed by the server (slave).
The length of a Modbus telegram is max. 256 bytes.
Network structure
Like Standard Ethernet, Modbus TCP installations are also wired
with a star structure. The star structure is characterized by a
central signal distributor (switch) with individual connections to
all the network’s terminals. A line or tree structure can be set up
with the help of a 3-port switch in the device or in the proximity
of each device.
Weidmüller can supply products for the network infrastructure –
please refer to our Industrial Ethernet catalogue.
Addressing
The addressing is carried out via a BOOTP (Internet Bootstrap
Protocol) inquiry via the client, using the Dynamic Host
Configuration Protocol (DHCP), or the user can set the IP
address with a software tool.
C.22
The following table can serve as a guide for bus installations
complying with the standard:
Max. bus extension (m)
100
Data rate (Mbps)
  10
100
100
SAI Active Universal - Modbus TCP
SAI-AU
SAI-AU
M8
M12
SAI Active
Modbus TCP Universal
C
Ordering data
IO variants
Type
16 digital inputs
16 digital inputs / 8 digital outputs
Order No.
Type
SAI-AU M8 IE 16DI
Qty.
1
1906880000
SAI-AU M12 IE 16DI
1
1906850000
SAI-AU M8 IE 16DI/8DO
1
1906890000
SAI-AU M12 IE 16DI/8DO
1
1906860000
SAI-AU M12 IE AI/AO/DI
1
1906870000
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Qty.
Order No.
Note
Technical specifications of bus system
Bus user
Transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Server
10 / 100 Mbps
red
IEEE 802.3
Yes
via DHCP
automatic
Note
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Analogue outputs
Analogue inputs
Resolution
Accuracy
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
0.5, 2.0 A
Short-circuit-protected
8A
TYPE 1 to EN 61131-2
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
12-bit
< 0.2 %
UL certification in preparation
Accessories
Plug
Type
Qty.
Order No.
Metal plug Ethernet, Male M12, D-coded, straight
SAISM-4/8S-M12-4P D-COD
1
1892120000
Metal plug Ethernet, Socket M12, D-coded, straight
SAIBM-4/8S-M12-4P D-COD
1
1892130000
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Note
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Voltage supply with standard M12 plug-in connectors (see Chap. D)
C.23
SAI Active Universal – EtherNet/IP
SAI Active
The EtherNet/IP system
C
Principle
Transmission rate
EtherNet/IP (Ethernet Industrial Protocol) is an open standard
that was developed by Rockwell Automation and the Open
DeviceNet Vendor Association (ODVA) for industrial networks.
EtherNet/IP is based on the Ethernet TCP/IP standards and
the Common Industrial Protocol (CIP).
The transmission rate is 10 or 100 Mbps. Weidmüller modules
detect the transmission rate automatically and set themselves
accordingly. The maximum length of the bus cable is the same
for both transmission rates.
CIP an open standard that is implemented in ISO layer 7, and
is also used for ControlNet™ and DeviceNet™ installations.
This enables continuous communications between the field
level and the Internet. The protocol includes a control
component for cyclic, real-time-compatible I/O signal
transmission (implicit messaging) and an information
component for the configuration, diagnosis and management
messages (explicit messaging).
The I/O data uses the User Datagram Protocol/Internet Protocol
(UDP/IP) and the information data uses TCP/IP protocols.
The IEEE802.3 standard is incremented on layers 1 and 2
(physical media and data link respectively).
Addressing
The Dynamic Host Configuration Protocol (DHCP) is used to
assign addresses to modules in EtherNet/IP networks.
Network structure
Like Standard Ethernet, EtherNet/IP installations are also wired
with a star structure. The star structure is characterised by a
central signal distributor (switch) with individual connections to
all the network’s terminals. A line or tree structure can be set up
with the help of a 3-port switch in the device or in the proximity
of each device.
Weidmüller can supply products for the network infrastructure –
please refer to our Industrial Ethernet catalogue.
C.24
The following table can serve as a guide for bus installations
complying with the standard:
Max. bus extension (m)
100
Data rate (Mbps)
  10
100
100
SAI Active Universal - EtherNet/IP
SAI-AU
SAI-AU
M8
M12
SAI Active
EtherNet/IP Universal
C
Ordering data
IO variants
Type
16 digital inputs
16 digital inputs / 8 digital outputs
Order No.
Type
SAI-AU M8 EIP 16DI
Qty.
1
1906930000
SAI-AU M12 EIP 16DI
1
1906900000
SAI-AU M8 EIP 16DI/8DO
1
1906940000
SAI-AU M12 EIP 16DI/8DO
1
1906910000
SAI-AU M12 EIP AI/AO/DI
1
1906920000
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Qty.
Order No.
Note
Technical specifications of bus system
Bus user
Transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Server
10 / 100 Mbps
red
IEEE 802.3
Yes
via DHCP
automatic
Note
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Analogue outputs
Analogue inputs
Resolution
Accuracy
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
0.5, 2.0 A
Short-circuit-protected
8A
TYPE 1 to EN 61131-2
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
12-bit
< 0.2 %
UL certification in preparation
Accessories
Plug
Type
Qty.
Order No.
Metal plug Ethernet, Male M12, D-coded, straight
SAISM-4/8S-M12-4P D-COD
1
1892120000
Metal plug Ethernet, Socket M12, D-coded, straight
SAIBM-4/8S-M12-4P D-COD
1
1892130000
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Note
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Voltage supply with standard M12 plug-in connectors (see Chap. D)
C.25
SAI Active Universal – PROFINET
SAI Active
PROFINET system description
C
Principal function
Addressing
PROFINET is the open Industrial Ethernet standard for
automation from PROFIBUS & PROFINET International (PI).
Profinet implements TCP/IP and IT standards. It is capable of
real-time Ethernet and can integrate fieldbus systems.
The Profinet design is distinguished mainly by the type of data
exchange used to meet the speed requirements.
Module addresses for the Profinet-IO are assigned automatically
using DCP (the discovery configuration protocol).
The are two Profinet perspectives – Profinet-CBA and
Profinet-IO:
• Profinet-CBA (component-based automation) is suitable for
component-based communications via TCP/IP and real-time
communications for the real-time demands of modular systems
engineering. Both communication channels can be used in
parallel.
• Profinet-IO was created for real-time (RT) communication and
synchronous communication (IRT: isynchronous real-time)
with decentralized peripheral devices. The designations RT
and IRT only describe the real-time characteristics of the
communication within the Profinet-IO.
Process data and alarms within the Profinet-IO are always
transmitted in real time (RT). Profinet „real time“ is based on the
definition from the IEEE and IEC. This specifies that only a
limited time is allowed within a bus cycle for the execution of
real-time services.
This RT communication is the basis for Profinet-IO data
exchange. Real-time data is handled with a higher priority than
TCP(UDP)/IP data packets. RT is the foundation for real-time
communications in the decentralized peripheral zone. Bus cycle
times in the 2–6 ms range are possible with this data exchange
mechanism.
C.26
Network structure
With the integration of a managed, two-port switch in all Profinet
modules, it is then possible to implement linear, star or tree
network topologies.
Transmission rate
The transmission rate is 100 Mbit/s. The maximum segment
length is 100 m.
SAI Active Universal - PROFINET
SAI-AU
SAI-AU
M8
M12
SAI Active
PROFINET Universal
C
Ordering data
IO variants
Type
16 digital inputs
16 digital inputs / 8 digital outputs
Order No.
Type
SAI-AU M8 PN 16DIM
Qty.
1
1019310000
SAI-AU M12 PN 16DIM
SAI-AU M8 PN 16DI/8DOM
1
1019320000
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Qty.
Order No.
1
1019270000
SAI-AU M12 PN 16DI/8DOM
1
1019280000
SAI-AU M12PN4/2AIO4DIOM
1
1019290000
Note
Technical specifications of bus system
Bus user
Transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Server
100 Mbps
red
IEEE 802.3
Yes
via DCP
automatic
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Analogue outputs
Analogue inputs
Resolution
Accuracy
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
2.0 A
Short-circuit-protected
8A
TYPE 1 to EN 61131-2
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
12-bit
< 0.2 %
Note
Accessories
Plug
Type
Qty.
Order No.
Metal plug Ethernet, Male M12, D-coded, straight
SAISM-4/8S-M12-4P D-COD
1
1892120000
Metal plug Ethernet, Socket M12, D-coded, straight
SAIBM-4/8S-M12-4P D-COD
1
1892130000
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Note
C.27
Industrial Ethernet
SAI Active
8-port switch in IP67
2 x Multicard markers
or 1 No. 40 mm long strip
for printing IP addresses
2-hole mounting and
functional earth terminal
C
Fault relay:
1 x M12 A-coded, 5-pole (24 V DC / 1 A)
8 x M12 D-coded, 4-pole
Redundant voltage supply
2 x M12 A-coded, 5-pole
One LED per port for
link / speed / data
Serial interface (RS232):
1 x M12 B-coded, 5-pole
Just 54 mm wide
Switches are the central components of a network. They
prevent data collision, allow rapid packet switching and enhance
data throughput. Not only do Weidmüller switches meet the
demands placed on the Fast Ethernet with its transmission
rate of up to 100 Mbit/s, but they are also downward
compatible with the older networks that have a transmission
rate of 10 Mbit/s (IEEE 802.3). They recognise the speed
automatically.
Weidmüller’s unmanaged switches are Plug & Play devices for
easy installation of Ethernet networks. They do not need to be
either configured or parameterised.
C.28
Weidmüller’s managed switches enable industry networks to
be structured in order to optimise transport routes and times
for network traffic. The various network components are
cabled together hierarchically in a physical star. The main
­distributor in the field, in this case the Industrial Ethernet switch
IE-SW-8-M-IP67, is the central switching point. All Weidmüller
switches are protocol transparent. Each port forms both a
­network segment and a collision domain that are intrinsic to the
port itself. The entire network bandwidth is available to each of
these segments. This results in enhanced network p
­ erformance
not only over the network as a whole, but also in each individual
segment. The switch examines each packet passing through for
the MAC address of the target segment and is able to forward it
directly there.
SAI Active
Industrial Ethernet
For direct connection to the network in the field, Weidmüller
offers an IP 67 switch with eight Ethernet ports for use in tough
environments.
• Robust plastic housing (IP67 ingress protection class) for use
in the field, complying with UL94 flammability rating V0
• Strip markers – wide range of marking systems and ­products
• Eight Ethernet ports with M12-D-coded plug-in connectors
• Temperature range from –40 °C to +60 °C
The features of the managed IP67 switch from Weidmüller
include the following:
• Port trunking
• Port mirroring
• VLAN IEEE 802.1Q
• Filtering and forwarding table with fixed entries
• Selective multicast control
• Quality of service
• Configurable relay functions
• Access to the address table
• Configuration via Web interface or terminal program
• SNMP V.1-capability
• RSTP and RapidRing™
• IGMP snooping with querier functions
• Auto-crossing, auto-negotiation, auto-polarity
• Broadcast limitation
• Flow control IEEE 802.3x
• DHCP
• RMON (statistics, history, alarms, occurrences)
C
Stock control with the Weidmüller Industrial Ethernet Switches in IP67
Dispatching station 2
Managed Switch
Dispatching station 1
RapidRing™
Dispatching station 3
Managed Switch
Managed Switch
Dispatching station 4
Stock
Unmanaged Switch
C.29
Industrial Ethernet
54
42
•​ IP 67 housing
• M12 D-coded plug-in connector
30,75
SAI Active
IP 67 unmanaged switch
C
201
5
210
IP 67 unmanaged switch
%\"
Ordering data
Number of ports
I​ndustrial Ethernet on the machine itself with simple and secure M12 plug-in
connectors.
With their IP 67 class of protection and operating temperature range of -40°C
to +60°C, these switches are ideal for use in the field.
In addition, the following functions are supported:
• Autonegotiation
• Redundant voltage supply
• Error relay PLC support
8 x M12
Order No.
IE-SW8-IP67
8877190000
Accessories
M12 protective cap
Marker, transparent
Note
Type
Order No.
SAI-SK-M12-UNI
2330260000
ESG 8/13.5/43.3 SAI AU
1912130000
Cables and connection elements are found starting
at Chapter D.
Technical data
Housing
Plastic
Length / Width / Height
210 mm / 54 mm / 31 mm
AC input voltage, min.-max.
8-24 V AC
DC input voltage, min.-max.
10-36 V DC
Input power AC / DC
max. 5 W
Input frequency
47 - 63 Hz
Operating temperature, min.-max.
-40 °C-60 °C
Storage temperature, min.-max.
-40 °C-85 °C
Installation
Wall
Protection class
IP 67
Standard
IEEE 802.3; 802.3u; 802.3x; Class I, Division 2
Data rate
10BASE-T/100BASE-TX
Segment length
Cooper 100 m
Functionality
„Auto-negotiation,
redundant power supply,
error relay for PLC support“
Flow control
half-duplex/full duplex
Status indication
Link, Power, Run, Status
Buffer memory
256 KByte per 8 ports
Address memory
4 K MAC addresses per 8 ports
Approvals
cULus, CE, EN55024, EN 55022, Gost R
Aging
300 s
Supported protocols
Profinet RT, Modbus TCP, TCP/IP, EthernetIP
Note:
C.30
Type
Industrial Ethernet
IP 67 managed switch
42
54
30,75
SAI Active
•​ IP 67 housing
• M12 D-coded plug-in connector
201
5
210
IP 67 managed switch
C
%\"
Ordering data
Number of ports
I​ndustrial Ethernet on the machine itself with simple and secure M12 plug-in
connectors.
With their IP 67 class of protection and operating temperature range of -40°C
to +60°C, these switches are ideal for use in the field.
The following features are supported:
• Autonegotiation
• Redundant voltage supply
• Error relay for PLC support
• SNMP V1
• Rapid Ring™
• RSTP 802.3w
• IGMP snooping
• Querier
• Port mirroring
• Port filtering
• Port setup functionality
• VLAN
• QoS
• TOS
• Diffserv
• MAC-based trunking
• Autocrossover
• Autopolarity
• Filtering and forwarding table
• DHCP-Client
8 x M12
Type
Order No.
IE-SW8-M-IP67
8877200000
Accessories
M12 protective cap
Communication cable
Marker, transparent
Note
Type
Order No.
SAI-SK-M12-UNI
2330260000
IE-C-RS232-M12
8874290000
ESG 8/13.5/43.3 SAI AU
1912130000
Cables and connection elements are found starting
at Chapter D.
Technical data
Housing
Plastic
Length / Width / Height
210 mm / 54 mm / 31 mm
AC input voltage, min.-max.
8-24 V AC
DC input voltage, min.-max.
10-36 V DC
Input power AC / DC
max. 5 W
Input frequency
47 - 63 Hz
Operating temperature, min.-max.
-40 °C-60 °C
Storage temperature, min.-max.
-40 °C-85 °C
Installation
Wall
Protection class
IP 67
Standard
IEEE 802.3; 802.3u; 802.3x; Class I, Division 2
Data rate
10BASE-T/100BASE-TX
Segment length
Cooper 100 m
Functionality
„Auto-negotiation,
redundant power supply,
ring topology;
error relay for PLC support“
Flow control
half-duplex/full duplex
Status indication
Link, Power, Run, Status
Buffer memory
256 KByte per 8 ports
Address memory
4 K MAC adress
Approvals
cULus, CE, EN55024, EN 55022, Gost R
Aging
300 s
Supported protocols
Profinet RT, Modbus TCP, TCP/IP, EthernetIP
Note:
C.31
Industrial Ethernet
SAISM / SAIBM
SAISM / SAIBM
4-pole, straight (Screw connection)
4-pole, straight (Tension clamp connection)
SAI Active
M12, metal (EMC), D-coded
Industrial Ethernet
C
Ordering data
Male plug
4-pole, PG 9
Type
SAISM-4/8S-M12-4P D-COD
Qty.
1
Order No
1892120000
Type
SAISM-4/8S-M12 4P D-ZF
Qty.
1
Order No
1892120001
4-pole, PG 9
SAIBM-4/8S-M12-4P D-COD
1
1892130000
SAIBM-4/8S-M12 4P D-ZF
1
1892130001
Female socket
Information
Other versions on request
Other versions on request
4
4
screw
CuZn
M12
6…8 (PG9)
0.14…0.5 (D-COD)
4
250 V (4-pole)
-40 ... 85
IP 67
Tension clamp
CuZn
M12
6…8 (PG9)
0.14…0.5 (D-COD)
4
250 V (4-pole)
-40 ... 85
IP 67
CuSnZn (B-COD) / gold-plated (D-COD)
CuSnZn (B-COD) / gold-plated (D-COD)
Technical data
mm
mm2
A
V
°C
Dimensioned drawing
Dimensioned drawing
Cable entry
Ø 6–8 mm
M12x1
M12x1
Ø 19.6
C.32
Ø 19.6
Cable entry
Ø 6–8 mm
Cable entry
Ø 6–8 mm
approx. 62
approx. 62
approx. 57
Cable entry
Ø 6–8 mm
approx. 57
Number of Poles
Type of connection
Housing material
Connection thread
Cable-connection diameter
Connection cross-section
Rated current
Rated voltage
Temperature range
Ingress protection class
Contact surface
Information
M12x1
M12x1
Ø 19.6
Ø 19.6
C
C.33
SAI Active
SAI Active Universal Pro
SAI Active
SAI Active Universal Pro
C
The trend from IP20 to IP67 or from switchgear cabinets to
cabinet-less machines has reached a peak with IP67 I/O
slaves. These plug & play solutions completely do away with
connection of individual conductors. This not only saves time,
errors when connecting individual wires no longer occur. IP67
bus modules are the most modern and cost-effective solution
for the connection of sensors and actuators.
What is a sub-bus system?
Machine installations nowadays use standardised bus systems.
In Europe, for example, PROFIBUS-DP is mostly used and in
North America, DeviceNet. The controllers provide the
respective interfaces, making connection of a bus system very
simple. Nevertheless, there can be isolated problems. The two
most significant are:
• The number of addresses is limited. With modular designs in
which each slave is a true station with bus address, the total
number of channels is limited.
• The costs for a PROFIBUS slave are higher than those for a
slave that integrates a manufacturer-specific bus.
For these reasons, sub-bus systems have become established
especially in large installations. Sub-bus systems enable I/O
stations to supply further I/O stations via an additional line
independent of the main bus. The advantage of SAI Universal Pro
is that the gateways are slaves themselves and can therefore
process I/O information. That means sensors and actuators can
be directly connected to gateways from Weidmüller. C.34
What do I have to consider?
Stand-alone modules or sub-bus system instead
Both systems are necessary and offer the optimal solution in
your applications. What is important is finding the right solution
for the respective application. You are then faced with the
question of when which solution is optimal. The usual solution
nowadays is to position a gateway directly after the controller
and to wire the entire machine with the sub-bus system. The
reasons for this are the transmission rates and the limited
length of a sub-line.
For the connecting cables between the sub-bus modules, it is
important to use a cost-effective solution and not to introduce
new special accessories. For connecting the sub-bus
stations, Weidmüller uses M8 shielded sensor cables.
This is new.
Transparent connection
The monitoring of each individual connection means that errors
are quickly detected and eliminated. On the one hand, all I/O
channels are diagnosed and, on the other, the sub-bus line is
monitored at every Extension IO.
This means that faulty wiring is immediately detected in the
course of installation. In addition, the gateway IO passes a
message to the PLC stating exactly where the error is located
in the sub-bus connection.
SAI Active
SAI Active Universal Pro
Transmission reliability
Special illumination concept
To ensure the same transmission reliability in the bus system
as in the main line, the SAI Universal PRO system uses CAN.
As a result of the many applications in the market, this solution
in particular is especially cost-effective and resistant to faults.
As on our standard SAI Universal modules, the Pro modules
have illuminated markers to make recognition particularly easy
and for relating the LEDs to the channels.
C
Flexible assembly
There are many IO gateways available such as
PROFIBUS-DP, DeviceNet, USB and the Ethernet dialects:
EtherNet/IP and Modbus TCP.
The gateways have 16 digital inputs and the USB module
additionally has 8 outputs. The USB is connected to a USB port
on a PC and works on any USB port once the relevant drivers
have been installed. An implementation using the Modbus
standard protocol is possible.
The transverse holes enable mounting of the Extension IO
modules from the side. Elongated holes help with assembly
alignment.
Extension IO modules
In addition to the familiar digital input and output modules,
the SAI Pro system also includes a counter module, thermo,
PT100 and analogue modules. This extensive range offers
all the possibilities.
Special labelling concept
Our modular terminals usually use marker strips. We have
logically transferred this system to the SAI Active Universal
and Universal Pro modules. It goes without saying that the
labels can be printed using the PrintJet.
Technical features
Max. no. stations
15
Bus structure
Max. length
Line
10 - 50 m
Addressing
Automatic
C.35
SAI Active Universal Pro
SAI-AU GW
SAI-AU GW
16DI
8DI / 8DO
SAI Active
Gateway I/O
C
Ordering data
Type
Bus system
Qty.
Order No.
SAI-AU M8 PB GW 16DI
1
1024310000
Profibus-DP
SAI-AU M12 PB GW 16DI
1
1938550000
DeviceNet
SAI-AU M12 DN GW 16DI
1
1938570000
SAI-AU M12 IE GW 16DI
1
1938580000
Ethernet/IP
SAI-AU M12 EIP GW 16DI
1
1019490000
PROFINET
SAI-AU M12 PN GW 16DIM
1
1019480000
PROFIBUS-DP
Modbus TCP
Type
SAI-AU M12 USB GW 8I8O
USB
Qty.
Order No.
1962240000
1
Note
Technical data
Bus user
Diagnosis indication
Technical data
Slave
red
Note
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
E/A function indicator
Sensor voltage indicator
PBT
5VA
0 °C ... 60 °C
-20 °C ... 85 °C
IP 67
24.0 V DC (18...30 V)
0.5 A
Short-circuit-protected
4A
TYPE 1 to EN 61131-2
LED yellow
LED green
UL certification in preparation
Accessories
Type
Miscellaneous accessories
Note
C.36
Marker, transparent
ESG 8/13.5/43.3 SAI AU
M12 protective cap
SAI-SK-M12-UNI
Qty.
Order No.
5
1912130000
20
2330260000
SAI Active Universal Pro
SAI-AU Digital
SAI-AU Digital
M8
M12
SAI Active
Extension IO digital
modules
C
Ordering data
IO variants
Type
8 inputs
8 outputs
8 inputs / 8 outputs
Order No.
Type
SAI-AU M8 SB 8DI
Qty.
1
1938600000
SAI-AU M12 SB 8DI
Qty.
1
1938610000
Order No.
SAI-AU M8 SB 8DO 2A
1
1938660000
SAI-AU M12 SB 8DO 2A
1
1938680000
SAI-AU M8 SB 8DIO
1
1938630000
SAI-AU M12 SB 8DIO
1
1938640000
Note
Technical data
Bus user
Diagnosis indication
Electrical isolation available
Station addresses
Baud rate
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Rated voltage
Output level
Note
Extension module - technical specifications
15
red
No
automatic
automatic
PBT
5VA
0 °C ... 60 °C
-25 °C ... 85 °C
IP 67
24.0 V DC (20.4...28.8 V)
Short-circuit-protected
General data
Input filter
max. current-carrying capacity per output signal
Total current max.
Digital input type
E/A function indicator
Sensor voltage indicator
configurable
0.5, 2.0 A
4, 8 A
TYPE 1 to EN 61131-2
LED yellow
LED green
Accessories
Miscellaneous accessories
Type
Marker, transparent
M8 protective cap
M12 protective cap
Qty.
Order No.
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Note
C.37
SAI Active Universal Pro
Extension IO analogue
modules
SAI-AU Analog
SAI Active
M12
C
Ordering data
IO variants
Type
4 inputs
4 outputs
Qty.
Order No.
SAI-AU M12 SB 4AI
1
1938690000
SAI-AU M12 SB 4AO
1
1938700000
Type
Qty.
Order No.
Note
Technical data
Bus user
Diagnosis indication
Electrical isolation available
Station addresses
Baud rate
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Rated voltage
Output level
Extension module - technical specifications
15
red
No
automatic
automatic
PBT
5VA
0 °C ... 60 °C
-25 °C ... 85 °C
IP 67
24.0 V DC (20.4...28.8 V)
Short-circuit-protected
Note
General data
Scan interval for each channel
Accuracy
Offset error
Linearity
Temperature coefficient
Voltage range
Current range
Inputs
Input resistance
Resolution of voltage range, inputs
max. Input current (differentiated)
Input resistance, current
Resolution of current range, inputs
Outputs
Analogue bandwidth
Load resistance, voltage
Resolution of voltage range, outputs
Load resistance, current
Resolution of current range, outputs
configurable 5 ms up to 250 ms
< 0.2 % of measurement range end value
< 0.1 % of measurement range end value
< 0.05 %
< 300 ppm/K of measuring range end value
0 ... +10 V, –10 V ... 10 V
0 ... 20 mA, 4 ... 20 mA
≥ 100 kΩ
11 bit + 1 bit sign (1 LSB = 4.88 mV)
- 50 mA ... +50 mA
< 125 Ω
11-bit (1 LSB = 9.76 μA )
100 Hz
≥ 1 kΩ
11 bit + 1 bit sign
≤ 600 Ω
12-bit
UL certification in preparation
Accessories
Miscellaneous accessories
Type
Marker, transparent
M8 protective cap
M12 protective cap
Note
C.38
Qty.
Order No.
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
SAI Active Universal Pro
Extension IO counter
modules
SAI-AU Counter
SAI Active
M12
C
Ordering data
IO variants
Type
2 inputs
SAI-AU M12 SB 2Counter
Qty.
1
Order No.
Type
Qty.
Order No.
1938730000
Note
Technical data
Bus user
Diagnosis indication
Electrical isolation available
Station addresses
Baud rate
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Rated voltage
Output level
Note
Extension module - technical specifications
15
red
No
automatic
automatic
PBT
5VA
0 °C ... 60 °C
-25 °C ... 85 °C
IP 67
24.0 V DC (20.4...28.8 V)
Short-circuit-protected
General data
Bit depth
Switching frequency
No. inputs
Voltage rating inputs
No. outputs
Output current outputs
32-Bit
100 kHz
2 x enables, 2 x counters, 2 x count directions
24 V DC
2
0.5 A
Accessories
Miscellaneous accessories
Type
Marker, transparent
M8 protective cap
M12 protective cap
Qty.
Order No.
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Note
C.39
SAI Active Universal Pro
Extension IO thermo
modules
SAI-AU Thermo
SAI Active
M12
C
Ordering data
IO variants
Type
4 inputs
SAI-AU M12 SB 4Thermo
Qty.
1
Order No.
Type
Qty.
Order No.
1938720000
Note
Technical data
Bus user
Diagnosis indication
Electrical isolation available
Station addresses
Baud rate
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Rated voltage
Output level
Note
Extension module - technical specifications
15
red
No
automatic
automatic
PBT
5VA
0 °C ... 60 °C
-25 °C ... 85 °C
IP 67
24.0 V DC (20.4...28.8 V)
Short-circuit-protected
General data
Sensor
Temperature range
Resolution
Conversion time
Measurement error
Input filter
Cold-trap compensation
Type J, K, L, B, E, N, R, S, T, U, mV measurement
depends on sensor type, preset type K, -100 °C ... 1370 °C
0.1 °C per digit
250 ms (configurable up to 70 ms)
< ± 0.5% (of measurement range end value)
configurable
External PT1000 connection on pins 1 and 3 (GND)
Accessories
Miscellaneous accessories
Type
Marker, transparent
M8 protective cap
M12 protective cap
Note
C.40
Qty.
Order No.
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
SAI Active Universal Pro
Extension IO PT100
modules
SAI-AU PT100
SAI Active
M12
C
Ordering data
IO variants
Type
SAI-AU M12 SB 4PT100
Qty.
1
Order No.
Type
Qty.
Order No.
1938710000
Note
Technical data
Bus user
Diagnosis indication
Electrical isolation available
Station addresses
Baud rate
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Rated voltage
Output level
Note
Extension module - technical specifications
15
red
No
automatic
automatic
PBT
5VA
0 °C ... 60 °C
-25 °C ... 85 °C
IP 67
24.0 V DC (20.4...28.8 V)
Short-circuit-protected
General data
Type of sensor
Temperature range for PT sensors
Temperature range for Ni sensors
Resistance measurement
Potentiometer
Resolution
Conversion time
Measurement error
Input filter
Measured current
N100, N1000, N120, PT100, PT1000, PT200, PT300, PT500
Potentiometer connection, Resistance measurement
-200 °C ... +850 °C
-60 °C ... +250 °C
max. 4000 Ω
100 to 4000 Ω (3-conductor connection)
0.1 °C per digit
250 ms (configurable up to 65 ms)
< ± 1 °C
configurable
typ. 0.5 mA
Accessories
Miscellaneous accessories
Type
Marker, transparent
M8 protective cap
M12 protective cap
Qty.
Order No.
5
1912130000
SAI-SK M8
50
1802760000
SAI-SK-M12-UNI
20
2330260000
ESG 8/13.5/43.3 SAI AU
Note
C.41
SAI Active Universal Pro
SAI Active
Universal Pro cables
The four-pole Standard M8 sensor cables are especially well
suited for the Universal Pro system. With their diameter of
0.34 mm2, these cables allow a system to be expanded up to
50 meters. The 360° shielding guarantees that signal
transmission is error-free.
C
Technical data
Cable construction
No. of poles
Sheathing colour
Material
Core cross-section
Contact surface
Nominal voltage
Rated current
Protection class
Ambient temperature, min.
Ambient temperature, max.
Note
Ordering data
Male, straight - female, straight
4
0.3 m
1.0 m
1.5 m
3.0 m
5.0 m
10.0 m
15.0 m
20.0 m
grey
PUR/PUR
0.34 mm2
Gold-plated
30 V
4A
IP 67
-30 °C
90 °C
1.5 m
3.0 m
5.0 m
10.0 m
Note
L in the drawing is the cable length
SAIL-M8BG-4S-1.5Q-SB
SAIL-M8BG-4S-3.0Q-SB
SAIL-M8BG-4S-5.0Q-SB
1981910150
1981910300
1981910500
SAIL-M8BG-4S-10Q-SB
1981911000
Other versions on request
Dimensions
Ordering data
Qty.
1
Order No.
1955340000
33.5
L
40.1
Ø 9.6
Ø 9.6
C.42
Order No.
1981900030
1981900100
1981900150
1981900300
1981900500
1981901000
1981901500
1981902000
Female, straight - open end
Terminating resistor
Type
SAI END CAN M8 4P
Type (Qty. = 1)
SAIL-M8GM8G-4S-0.3Q-SB
SAIL-M8GM8G-4S-1.0Q-SB
SAIL-M8GM8G-4S-1.5Q-SB
SAIL-M8GM8G-4S-3.0Q-SB
SAIL-M8GM8G-4S-5.0Q-SB
SAIL-M8GM8G-4S-10Q-SB
SAIL-M8GM8G-4S-15Q-SB
SAIL-M8GM8G-4S-20Q-SB
C
C.43
SAI Active
SAI Active Universal Bluetooth
SAI Active
SAI-Bluetooth
The Concept
C
A Bluetooth master can perform wireless
communication with up to six slave stations.
All stations function as field devices with
IP67 protection. The connection from the sensor
or actuator utilizes a M12 connector.
The Implementation
The Bluetooth gateway (master) functions as a slave in a
PROFIBUS-DP network or a DeviceNet™ network.
Together with the slaves, it is configured via GSD or EDS files.
PROFIBUS
DeviceNet TM
PLC
Besides communication with bluetooth stations, the gateway
features an additional 12 digital inputs with M12 connectors.
Up to 31 Bluetooth masters can be operated within one
application. Each gateway can communicate with up to six of
its slaves using the WIRELESSopen protocol, which is based
on the CANopen standard.
Gateway
SAI-Bluetooth
Slave (1)
C.44
...
Slave (6)
SAI Active
SAI Active Universal Bluetooth
The Products
• Profibus or DeviceNet™ slave with 12 digital inputs and
Bluetooth gateway function (master) for 6 Bluetooth slaves
• Bluetooth slave with 16 digital inputs
• Bluetooth slave with 8 digital inputs and 8 digital inputs or
outputs (configurable)
• Bluetooth slave with 4 digital and 4 analogue inputs and
2 digital and 2 analogue outputs
C
All I/O signals on M12 connectors
Advantages
•Interference-resistant data communication without cable,
e.g., for mobile sections of the facility.
• Classic distributor with the standard installation procedure
• Configuration as standard PROFIBUS-DP components
• Full network transparency also for wireless stations
• Convenient address settings, in illuminated address space
•Comprehensive diagnosis and status display on each module,
for operating voltages and communication
•Generous surface for identification marking, with background
lighting and arrow-shaped status display. Additional colour
display change in event of I/O error
C.45
SAI Active Universal Bluetooth
Gateway
SAI-AU
SAI Active
M12
C
Ordering data
IO variants
Type
Qty.
Order No.
12 digital inputs
SAI-AU M12 GW PB/BT 12I
1
1006980000
12 digital inputs
SAI-AU M12 GW DN/BT 12I
1
1060020000
Type
Qty.
Order No.
Note
Technical specifications of bus system
Bus user
Profibus transmission rate
DeviceNet transmission rate
Diagnosis indication
Fieldbus interface
Electrical isolation available
Station addresses
Baud rate
Note
Slave
Max. 12 Mbps
Max. 500 kBaud
red
RS 485
Yes
Rotary switch 1-125
automatic
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
Digital input type
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
TYPE 1 to EN 61131-2
UL certification in preparation
Accessories
Plug
Type
Qty.
Order No.
Metal plug, Male M12, B-coded, straight
SAISM 5/8S M12 5P B-COD
1
1784790000
Metal plug, Socket M12, B-coded, straight
SAIBM 5/8S M12 5P B-COD
1
1784780000
Connecting plug in M12 Plug
SAIEND PB M12 5P B-COD
1
1784770000
Terminating resistor in M12 plug
SAIEND CAN-M12 5P A-COD
1
1784760000
Metal plug, Male M12, 5-pole, shield A-coded
SAIS-M-5/8S M12 5P A-COD
1
1784740000
Metal plug, Socket M12, 5-pole, shield A-coded
SAIB-M-5/8S M12 5P A-COD
1
1784750000
5
1912130000
20
2330260000
Miscellaneous accessories
Note
C.46
Marker, transparent
ESG 8/13.5/43.3 SAI AU
M12 protective cap
SAI-SK-M12-UNI
SAI Active Universal Bluetooth
Slaves
SAI-AU
SAI Active
M12
C
Ordering data
IO variants
Type
16 digital inputs
16 digital inputs / 8 digital outputs
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Qty.
Order No.
SAI-AU M12 BT 16DI
1
1006940000
SAI-AU M12 BT 16DI/8DO
1
1006930000
SAI-AU M12 BT4AI2AO2DIO
1
1006920000
Type
Qty.
Order No.
Note
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
Analogue outputs
Analogue inputs
Resolution
Accuracy
PBT
V-0
0 °C ... 55 °C
-25 °C ... 70 °C
IP 67
24.0 V DC (18...30 V)
0.5, 2.0 A
Short-circuit-protected
8A
TYPE 1 to EN 61131-2
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
-10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
12-bit
< 0.2 %
Note
Accessories
Miscellaneous accessories
Type
Marker, transparent
ESG 8/13.5/43.3 SAI AU
M12 protective cap
SAI-SK-M12-UNI
Qty.
Order No.
5
1912130000
20
2330260000
Note
C.47
AS-Interface Modular
SAI Active
System description for Actuator/Sensor Interface
C
The AS-Interface is defined in the
standards EN 50295 and IEC 62026-2.
The ASI bus was developed to satisfy
the need for a system that guarantees
low-cost data transmission. To achieve
this, a number of decisions were made.
The system is specialised for the
transmission of digital signals, for example.
In addition, use of the otherwise usual
shielded cables was abandoned and a
simple unshielded, but coded twisted
pair system was chosen. The necessary
data security was achieved through
transmission in Manchester code.
A separate power supply is not required
for input modules since these are powered
via the data cable. Since the original
definition did not satisfy requirements, the
system was further developed to enable
transmission of analogue data in addition,
and the number of stations was increased.
ASI has since become established in
various sectors. The important limiting
factors are:
• The number of stations may not
exceed 62.
• The necessary speed may not be less
than 5 ms for 31 slaves or 10 ms for
62 slaves.
Weidmüller offers its SAI AS-Interface
Modular distributors in M12 and IDC in
Versions 2.0 and 2.1. The most noteworthy
advantages are pluggable electronics,
infrared addressing and the high IP68
(M12) ingress protection class. The M12
threaded metal ring remains a special
feature, since it offers greater solidity
and reliability.
Pluggable electronics
The connection element is mechanically
separate from the electronics. This
makes it possible to install the entire
sensor-actuator cabling before the
electronics are plugged in, making it
easy to replace the electronics without
having to undo the wiring.
Infrared addressing
The unreliability suffered with the earlier
system of addressing via M12 is
eliminated. Loose contacts are a thing of
the past, as are leaks at the addressing
socket.
IP68 ingress protection class with
special marking
The approval tests at Weidmüller are
checked for ageing. AS Interface
hood-type distributors are first checked
for leaks after 168 hours of ageing. This
is done by measuring resistance under
water. This test procedure guarantees
extremely resistant distributors.
Parameters
Transmission rate
167 kbaud
Max. segment length
100 m
Cycle times
5 ms (31 slaves),
10 ms (62 slaves)
31 for standard slaves,
62 for A/B slaves
Number of stations
C.48
AS Interface modular
SAI-ASI Modular
SAI-ASI Modular
31 slaves
62 slaves/ AB slaves
SAI Active
SAI-ASI Modular
C
Ordering data
Order No.
Type
4 inputs
Type
SAI-ASI-S H 4A
1
1799270000
SAI-ASI-S H AB 4E
4 outputs
Type of plug-on fitting
Qty.
SAI-ASI-S H 4E
1
7902090000
2 inputs / 2 outputs
SAI-ASI-S H 2E/2A
1
1799280000
4 inputs / 4 outputs
SAI-ASI-S H 4E/4A
1
7902100000
Qty.
Order No.
1848440000
1
Note
Technical specifications of bus system
Bus user
No. of subscribers
Transmission rate
Diagnosis indication
Station addresses
AS interface spezifikation
Slave
31/ 62
167 kbits
red
Infrared
V2.1
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
E/A function indicator
Sensor voltage indicator
PBT
V-0
-20 °C ... 70 °C
-40 °C ... 85 °C
IP 68
26.5 …31.6 V
2.0 A
Short-circuit-protected
2A
TYPE 1 to EN 61131-2
LED yellow
LED green
Note
Accessories
Lower section for 4 I/O-channel modules
Type
Qty.
Order No.
with 4 No. M12 connections
SAI-ASI 4E W BOTTOM
1
1762470000
With 4 IDC connections
SAI-ASI 4 IDC BOTTOM
1
1917370000
with 8 M12 connections
SAI-ASI 4E/4A W BOTTOM
1
1762290000
With 8 IDC connections
SAI-ASI 8 IDC BOTTOM
1
1917360000
Lower section for 8 I/O-channel modules
Note
C.49
AS-Interface Line
SAI Active
Actuator-Sensor Interface Line
The new space-saving SAI AS-Interface family makes new
applications possible. The narrow 24 mm form of the modules
means that they can fit into a very small installation space.
The length is also remarkable, since the M8 module with
4 connections is only 123 mm long.
The ribbon cable locks into the base part, while the coded
cable rules out the possibility of misconnection. The piercing
connectors make the module easy to connect with the help
of a screwdriver. Pure input modules only require the yellow
ribbon cable. The additional voltage for the outputs is fed to
the module via the black cable.
The implementation of the new AS-Interface specification
3.0 means that modules with 8 inputs on one address with
62 slaves are possible in one network. Also modules with
4 inputs and 4 outputs with 62 slaves are now available.
These modules require an M4 master.
All modules are certified by the AS-Interface Association and
conform to the AS-Interface specifications.
.
.
The outputs as well as the supply for sensors are protected
against short circuits and overload. These faults are signalled to
the master using the peripheral bit. At the same time, the AS-I
and fault LEDs blink alternately red/green in accordance with the
AS-Interface specification.
.
.
.
.
.
.
C
C.50
All outputs can be simultaneously operated at the maximum
current capacity of 0.5 A.
The housing has IP67 class of protection, which guarantees
resistance to water and dust. The addressing is performed via
the infrared adapter with the user-friendly hand programming
tool.
With the Weidmüller MultiCard markers, each I/O point can be
individually marked, while a further marker is available for the
complete module.
There are eight module versions, with four different I/O
configurations available:
• 4 inputs
• 8 inputs
• 4 outputs
• 4 inputs and 4 outputs
Each I/O variant is available in two connection versions. The
sensors or actuators can be connected with 5-pole M12 or
3-pole M8 plug-in connectors.
AS Interface line
SAI-ASI Line
SAI-ASI Line
M8
M12
SAI Active
SAI-ASI Line V3
C
Ordering data
Type
IO variants
4 inputs
4 outputs
4 inputs / 4 outputs
8 inputs
Order No.
Type
SAI-ASI-L-M8-4I V3
Qty.
1
1962640000
SAI-ASI-L-M12-4I V3
Qty.
1
1962680000
Order No.
SAI-ASI-L-M8-4O V3
1
1962660000
SAI-ASI-L-M12-4O V3
1
1962700000
SAI-ASI-L-M8-4I/4O V3
1
1962670000
SAI-ASI-L-M12-4I/4O V3
1
1962710000
SAI-ASI-L-M8-8I V3
1
1962650000
SAI-ASI-L-M12-8I V3
1
1962690000
Note
Technical specifications of bus system
Bus user
No. of subscribers
Transmission rate
Diagnosis indication
Station addresses
AS interface spezifikation
Slave
62
167 kbits
red
Infrared
V3.0
Technical data
General data
Insulation material of housing
Flammability class UL 94
Operating temperature
Storage temperature
Protection class
Electrical data
Rated voltage
max. current-carrying capacity per output signal
Output level
Total current max.
Digital input type
E/A function indicator
Sensor voltage indicator
PBT
V-0
-25 °C ... 60 °C
-25 °C ... 85 °C
IP 67
26.5 …31.6 V
0.5 A
Short-circuit-protected
2A
TYPE 1 to EN 61131-2
LED yellow
LED green
Note
Accessories
Type
Miscellaneous accessories
M12 protective cap
M8 protective cap
Qty.
Order No.
SAI-SK-M12
30
9456050000
SAI-SK M8
50
1802760000
Note
C.51
AS-Interface Line
SAI Active
AS-Interface programming accessories
AS-Interface infrared programming adapter
Handheld AS-Interface address programmer
C
AS-Interface IR adapter for addressing AS-Interface modules
with infrared interface.
• Usable with handheld address programmer
(order no. 1805410000).
• Converts TTL signals of the handheld addressing unit into optical signals for the AS-Interface modules and vice versa.
• Connection to addressing unit by M12 plug-in connector
and infrared head to AS-Interface modules.
• Cable length 1 m
Function
• Addressing or programming of up to 62 slaves. Display of
all slaves present on the bus, reading and writing of slave
addresses and slave parameters. Switches between and
displays the various operating modes by means of a MODE
button. Display of the “peripheral fault flag” (Version 2.1).
Addressing of slaves via optical data interface (Version 2.1)
with special IR adapters.
Power supply
• Built-in rechargeable battery. Charging time approx. 12 hours.
Operating time with fully charged battery: 8 hours,
corresponding to around 250 read/write operations. 230 V AC
charger included. IP20 class of protection.
Ordering data
Type
SAI-ASI IR adapter
C.52
Ordering data
Qty.
1
Order No.
Type
1804500000
SAI-ASI handheld
Qty.
1
Order No.
1805410000
AS-Interface Line
SAI Active
AS-Interface power supply / Gateway
AS-Interface power supply
Gateway PROFIBUS-DP-AS-Interface
C
Technical data
Input
Input voltage
Input current (115 V / 230 V AC)
Back-up fuse
Technical data
85 – 270 V DC / 120 – 400 V AC
at 115 V AC 3.5 delay-action /
at 230 V AC 1.75 delay-action
Output
Output voltage
Max. output current
Resistant to overloads, continuous
short-circuits and no-load conditions
Fuse data
30.5 V DC
Resistance to high voltages
Output fuse
Class of protection
Terminal protection class
MTBF
Operational and environmental data
Input / output 3.75 k V AC
Operating temperature
Storage temperature
Humidity
Mounting position
Distance
Pollution severity
General data
–30°…+70°
Dimensions (B x H x T)
Terminal rail
Housing colour
Weight
Protection class
79 x 100 x 120 mm
4.0 A
SAI-ASI PU 4A
Rated operational voltage
Connections
Baud rates
AS-i-cycle time
Insulation voltage
EMC
not needed because of short-circuit resistance
Class 1, with PE connection (EN 60950)
IP20 (VGB4)
> 380,0000
Ambient temperature
Storage temperature
Housings
Dimensions (L, B, H)
Protection class acc. to DIN 40050
Weight
AS-i-specification
DIN
Master power supply A, approx. 200 mA
from the AS-i-circuit
AS-i-voltage 30 V DC
9-pole PROFIBUS Sub-D
9.6-12,000 KBaud
150 µs (number of slaves + 2)
> 500 V
acc. to EN 50082, EN 50081 /
automatic detection
0 °C … +55 °C
–25 °C … +85 °C
Snaps on to TS 35/7.5
120 mm, 75 mm, 83 mm
IP20
460 g
3.0
19245 part 3
–30°…+105°
95 % relative humidity, average for year
standing
no clearance necessary
2 acc. to VD 0110 part 1
Indicators
Snaps on to TS 35 / 7.5
black
1.5 kg
IP 20
LCD
LED green (power)
LED green/red (MNS)
LED red (config error)
LED green (U AS-i)
LED green (AS-i active)
LED green (prg enable)
LED yellow (prj mode)
Buttons
Ordering data
Type
Rated operational current
max 0.85 Aeff
AS-I slave address indicator,
error messages
power supply OK
PROFIBUS-DP status
configuration error
AS-I voltage OK
AS-I operation normal
automatic slave programming possible
configuration mode active
2 (mode/set)
Ordering data
Qty.
1
Order No.
Type
1002830000
Gateway AS-i PBDP 3.0
Qty.
1
Order No.
1004040000
C.53
AS-Interface Line
SAI Active
AS-Interface ribbon cables
AS-Interface ribbon cable, rubber
Coupling module single from ribbon cable to round cable
Technical data
Technical data
C
Use
Colour
Type of cable
Conductor cross-section
Material
Halogen-free
Temperature range (at rest)
Temperature range (moving)
Flammability class
Ozone/weather-resistant
Minimum bending radii
Flexural properties
AS-Interface
yellow, black
profiled cable
2 x 1.5 mm2
EPDM (rubber)
yes
–40 °C ... +85 °C
–25 °C ... +85 °C
flammable
partially resistant
fixed: 12 mm movable: 24 mm
no break after 30,000
backward and forward movements
Ordering data
ribbon cable
Pollution severity DIN EN 0110
Ambient temperature
Storage temperature
Housing material
Shock resistance
Vibration resistance
Specific data
3
–25 °C … +75 °C
–40 °C … +85 °C
PA 6-GF-FR
30 g/11 ms
Ingress protection class DIN 40050
Weight
Pin assignment
Pin 1:
Pin 3:
IP 67
2
ribbon cable, yellow + black
1.5 mm2
piercing technology
PUR solid
0.34 mm2
2m
≤ 40 V
≤4A
10 … 55 Hz; 1.0 mm amplitude
20 g
AS-Interface “+” blue
AS-Interface “–” brown
Ordering data
Type
AS-KG-ge
Designation
Ribbon cable yellow
Qty.
100 m
AS-KG-sw
Ribbon cable black
100 m
C.54
Connection AS-Interface
No. connectable cables
Type of cable
Flexible lead cross-section
Connection type
Type of cable
Conductor cross-section
Cable length
Operating voltage
Operating current
General data
Order No.
Type
9455110000
9455120000
SAI-ASI T FR
Qty.
1
Order No.
1925010000
SAI Active
AS-Interface Line
Coupling module ribbon cable
to round cable / yellow + black (2 m)
Bridge module ribbon cable
C
Technical data
Technical data
Connection AS-Interface
No. connectable cables
Type of cable
Flexible lead cross-section
Connection type
Type of cable
Conductor cross-section
Cable length
Operating voltage
Operating current
General data
ribbon cable
Pollution severity DIN EN 0110
Ambient temperature
Storage temperature
Housing material
Shock resistance
Vibration resistance
Specific data
3
Ingress protection class DIN 40050
Weight
Pin assignment
Pin 1:
Pin 2:
Pin 3:
Pin 4:
IP 65
2
ribbon cable, yellow + black
1.5 mm2
piercing technology
PUR solid
0.34 mm2
2m
≤ 40 V
≤4A
–25 °C … +75 °C
–40 °C … +85 °C
PA 6-GF-FR
30 g/11 ms
10 … 55 Hz; 1.0 mm amplitude
20 g without cable
AS-Interface “+”
ext. power supply “-”
AS-Interface “–”
ext. power supply “+”
Ordering data
Type
SAI-ASI T FF small
Connection AS-Interface
No. connectable cables
Type of cable
Flexible lead cross-section
Connection type
Type of cable
Conductor cross-section
Cable length
Operating voltage
Operating current
General data
ribbon cable
Pollution severity DIN EN 0110
Ambient temperature
Storage temperature
Housing material
Shock resistance
Vibration resistance
Specific data
3
–25 °C … +75 °C
–40 °C … +85 °C
PA 6-GF-FR
30 g/11 ms
Ingress protection class DIN 40050
Weight
Pin assignment
Pin 1:
Pin 2:
Pin 3:
Pin 4:
IP 65 / IP 67
2
ribbon cable, yellow + black
1.5 mm2
piercing technology
PUR solid
0.34 mm2
2m
≤ 40 V
≤4A
10 … 55 Hz; 1.0 mm amplitude
50 g without cable
AS-Interface “+”
ext. power supply “-”
AS-Interface “–”
ext. power supply “+”
Ordering data
Qty.
1
Order No.
Type
1026090000
SAI-ASI T FFR
Qty.
1
Order No.
1924980000
C.55
C
C.56
SAI Active
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement