Body Shop 2014
Body Shop Catalog
Eurovac II - (2 & 4 User Central Vac Sanding Systems)
(Intermittent Duty Cycle)
Eurovac II - 2.5HP (2 User System)
Eurovac
Part No.
Description
Eurovac II 2.5HP (2 User Central Vac Sanding System)
Airflow - 115 CFM
Brush Motor - 4000 Hrs
Includes: Pump & Separator Only
System Package
2.5HP Central (Brush Motor)
Includes: Central System, 2 Drops, 2 Hoses & 80' PVC
Pipe/Fittings
● Wallmounted unit as a standard. Upgrade to legs available
● Cyclonic filter separator & final polyester cartridge filter
(99.93% at 3 microns or larger)
● Single phase voltage: 115/1/60.
● Utilizes low voltage (24 volt, 1 phase) wiring for automatic
on/off switches when the inlet is opened
Sep Size Filter #
Filter Size Filter Qty. Can Size
1 14"
50-129
8" x 16"
1
10 Gallon
Brushless motors - 8000 hrs
Eurovac II 2.5HP
Optional Upgrades
Hepa Filtration - Elimanates dust to 99.97% at .3 microns or
larger
Manual Pulse Jet Cleaning
Automatic Pulse Jet Cleaning
Eurovac II - 5HP (4 User System)
SYS-05016300000
SYS-050163PKG00
SYS-05016000000
SYS-050-195
SYS-030-420
SYS-030-421
Eurovac
Part No.
Description
Eurovac II 5HP (4 User Central Vac Sanding System)
Airflow - 150 CFM
Brush Motor - 4000 Hrs
Includes: Pump & Separator Only
System Package
5HP Central (Brush Motor)
Includes: Central System, 6 Drops, 4 Hoses & 260' PVC
Pipe/Fittings)
SYS-050-005
SYS-050-050
● Wallmounted unit as a standard. Upgrade to legs available
● Cyclonic pre-separator & final cartridge filter (99.93% at 3
microns or larger)
● Manual Pulse Jet Cleaning
● Voltage: 1 Phase 60 Hertz 220/120 (4 wire: 2 Hot, 1 Neutral
& 1 Ground). Nema #L1420P plug provided.
● Utilizes low voltage (24 volt, 1 phase) wiring for automatic
on/off switches when the inlet is opened
Eurovac II 5HP
Optional Upgrades
Prices subject to change without notice
Sep Size Filter #
Filter Size Filter Qty. Can Size
1 18"
50-129
8" x 16"
1
20 Gallon
Brushless motors - 8000 hrs
Hepa Filtration - Elimanates dust to 99.97% at .3 microns or
larger
Misc
Automatic Pulse Jet Cleaning
UPGEIIAUTO
800-265-3878
www.eurovac.com
SYS-030719I0000
10/12/2014
Eurovac I (4, 6, 8 & 10 User Central Vac Sanding System)
(Continuous Duty Motor):
Eurovac I - "Board Mounted"
5HP & 10HP
4 & 6 User System (Sanding)
Eurovac
Part No.
Description
Eurovac I - 5HP "Board Mounted"
(3 to 4 User Central Vac Sanding System)
140 CFM at 60" WG
150 CFM at 50" WG
Eurovac I - 7HP "Board Mounted"
(4 User Central Vac Sanding System)
150 CFM at 60" WG
170 CFM at 50" WG
Eurovac I - 10HP 230/460v "Board Mounted"
(6 User Central Vac Sanding System)
250 CFM at 70" WG
275 CFM at 60" WG
Eurovac I - 10HP 575v "Board Mounted"
(6 User Central Vac Sanding System)
250 CFM at 70" WG
275 CFM at 60" WG
● Board mount system which comes pre-wired from panel to
pump and to the pulse jet cleaning.
● 20,000+ of continuous use
● Cyclonic filter separator & final polyester cartridge filter
(99.93% at 3 microns or larger)
● Automatic pulse jet cleaning system.
● Includes starter with overload protection and step down to low
voltage wiring for automatic on/off switches when the inlet is
opened
● 208-240, 460 and 575 volts. 3 phase, 60 hertz.
● Includes silencer (Sound Cabinet Extra)
Sep Size
1 18"
Eurovac I - 24" 1cart Combo Unit
20HP
8 User System (Sanding)
Filter #
50-129
Filter Size
8" x 16"
Filter Qty.
1
SYS-03030200000
SYS-03030200005
Eurovac
Part No.
Eurovac I - 20HP (24" 1cart Combo Unit)
320 CFM at 70" WG
380 CFM at 60" WG
Eurovac I - 20HP 460v or 575v Super Vacuum Blower
Upgrade - Additional Amount
● 30% More Suction Than Standard EI 20HP System
550 CFM at 60" WG
● NOTE: Only upgrade if extra performance is needed - avoid
extended low flow operating conditions
● NOTE 2: Not available in 208/3/60
● Stand mount system which comes pre-wired from panel to
pump and to the pulse jet cleaning.
● 20,000+ hrs of continuous use
● Cyclonic filter separator & qty one final polyester cartridge filter
(70 sq. ft. filter media)
● Efficiency - 99.93% at 3 microns or larger
● Automatic pulse jet cleaning system.
● Includes starter with overload protection and step down
transformer for pulse jet cleaning
● System includes off delay timer
● 208-240, 460 and 575 volts. 3 phase, 60 hertz.
● Includes silencer
Prices subject to change without notice
SYS-03015100000
Can Size
20 Gal
Description
Sep Size
1 18"
Sep Size
1 24"
SYS-03010000000
Filter #
50-147
Filter #
50-131
Filter Size
9" x 22"
Filter Size
9" x 36"
Filter Qty.
1
Filter Qty.
1
800-265-3878
www.eurovac.com
SYS-030360C1000
UPG20SUPVAC
Can Size
20 Gal
Can Size
30 Gal
10/12/2014
Eurovac I - Double 10HP Turbine
System
24" 1cart System
10 User System (Sanding)
Eurovac
Part No.
Description
10HP + 10HP Double Turbine System
SYS-030490 CFM at 70" WG
35000000
550 CFM at 60" WG
● Board mount system which comes pre-wired from panel to
pumps and to the pulse jet cleaning.
● 20,000+ of continuous use
● Cyclonic filter separator & qty one final polyester cartridge filter
(70 sq. ft. filter media)
● Automatic pulse jet cleaning system.
● Includes starter with overload protection and step down
transformer for pulse jet cleaning
● System includes off delay timer
● 208-240, 460 and 575 volts. 3 phase, 60 hertz.
● Includes two silencers
Sep Size
1 24"
Filter #
50-131
Filter Size
9" x 36"
Filter Qty.
1
Can Size
30 Gal
Eurovac I - Optional Upgrades
Hepa Option
Sound Attenuation Cabinet
(For board mounted units only)
Sound Attenuation Cabinet
(For combo frame units only)
5-10HP Hepa Filtration - Elimanates dust to 99.97% at .3
microns or larger
20HP Hepa Filtration - Elimanates dust to 99.97% at .3 microns
or larger
4' x 2' x 7' High Sound Attenuation Cabinet Blue
(Reduces sound by 5 dba at 3 meters)
EI Combo Unit High Sound Attenuation Cabinet Blue
(Reduces sound by 5 dba at 3 meters)
(Includes cooling fan as well as panel upgrade to operate fan)
SYS-030719I0000
SYS-030720I0000
SYS-030705B0000
SYS-030706B0000
Eurovac III - (10 to 75+ User Central Vac Sanding Systems)
(Continous Duty Cycle)
Eurovac III - 15HP to 75HP
10 to 75+ Man System
Description
Eurovac
Part No.
Eurovac III - 15HP (10 U
E
User C
Central
t lV
Vac S
Sanding
di S
System)
t )
24" Separator (1 Filter)
Airflow - 500 CFM at 80" WG (6"Hg)
SYS-15C6024FS1B
Eurovac III - 20HP (12 User Central Vac Sanding System)
24" Separator (2 Filter)
Airflow - 630 CFM at 80" WG
Eurovac III - 25HP (18 User Central Va Sanding System)
30" Separator (2 Filter)
Airflow - 930 CFM at 80" WG
● Centrifugal multi-stage blowers are energy efficient
● 20,000+ hours of continuous operation.
● Cyclonic filter separator & final polyester cartridge filter
(99.93% at 3 microns or larger)
● Automatic pulse jet cleaning system.
● Includes starter with overload protection and step down
transformer for pulse jet cleaning
● 208-240, 460 and 575 volts. 3 phase, 60 hertz.
● Includes Silencer
Filter #
Filter Size/Media
Larger systems are available up to 150HP for as Separator Size
1
24"
50-131
9” x 36” (70 sq ft)
many technicians operating as requested.
Can Size
Systems can be set at higher and lower inches of Filter Qty.
30 Gallon
water column (pricing may vary slightly). Custom 1 1 or 2
Separator Size
Filter #
Filter Size/Media
configurations are also available please Call
1 30"
50-131
9” x 36” (140 sq ft.)
Eurovac Factory Representative at
Filter Qty.
Can Size
800-265-3878 for pricing.
1 2
30 Gallon
Hepa Filtration - Elimanates dust to 99.97% at .3 microns or
EIII Hepa Option
larger
Prices subject to change without notice
800-265-3878
www.eurovac.com
SYS-20C6024FS2B
SYS-25C6030FS2
SYS-03072110500
10/12/2014
Eurovac II - 2 Man Portables
EII Compact Sanding Portable
Eurovac
Part No.
Description
Eurovac II - 2.5 HP Compact Portable
(2 Orbital Sander User System)
Includes: Qty 2 - 25' Hoses with airline & hose/tool hangers
Eurovac II - 2.5 HP Compact Portable
(1 Housekeeping User System)
Includes: Qty 1 - Anti-static shop cleaning package
SYS-05017900000
SYS-05017800000
● Blower: 2.5HP 1300 watt motor (120CFM / 115" Water
Column)
● Filtration: Disposable bag filter and secondary hepa filter
● Vacuum Switch (50-179): On/Off/Auto 3 Position Switch
● Vacuum Switch (50-178): On/Off/Auto 2 Position Switch
● Electrical Cord with plug: 15'
● Electrical: 115 Volt 1Ph 60Hz (US / Canada)
● Alt Electrical Upon Request:
230 Volt 1Ph 50Hz 1400 Watt (UK)
220 Volt 1Ph 60Hz 1400 Watt (Europe)
Sep Size
1 14"
Width
124"
EII Compact Cyclonic Sanding
Portable
Bag Filter#
Hepa Filter#
57-5017910G
50-143
Depth
18"
Filter Qty
1
Height Sound Canister
41"
76 dB(A) N/A (Bag)
Eurovac
Part No.
Description
Eurovac II - 2.5 HP Compact Cyclonic Portable
(2 Orbital Sander User System)
Includes: Qty 2 - 25' Hoses with airline & hose/tool hangers
Eurovac II - 2.5 HP Compact Cyclonic Portable
(1 Housekeeping User System)
Includes: Qty 1 - Anti-static shop cleaning package
SYS-05018100000
SYS-05018600000
● Blower: 2.5HP 1300 watt motor (120CFM / 115" Water
Column)
● Filtration: Cyclonic separation with internal wall guarding filter
from the dust upon entry (removes 85%+ of the dust). Final
polyester cartridge filter (99.93% at 3 microns or larger)
● Vacuum Switch (50-181): On/Off/Auto 3 Position Switch
● Vacuum Switch (50-188): On/Off/Auto 2 Position Switch
● Electrical Cord with plug: 15'
● Electrical: 115 Volt 1Ph 60Hz (US / Canada)
● Alt Electrical Upon Request:
230 Volt 1Ph 50Hz 1400 Watt (UK)
220 Volt 1Ph 60Hz 1400 Watt (Europe)
Sep Size
1 14"
Width
124"
Filter #
50-129
Depth
18"
Filter Size
8" x 16"
Filter Qty.
1
Height Sound Canister
41"
76 dB(A) 5 Gallon
Optional Upgrades For EII Portable - See Next Page
EII Portable Optional Upgrades
Eurovac
Part No.
Description
Primary Storage Tray
● Adds 2" of height to portable
● Storage of work related items (ie: paper & tools) for added
SYS-050convenience and efficiency
18100SR1
● Note: Available for EII Compact & Compact Cyclonic Portables
Only
Hepa Filtration - Elimanates dust to 99.97% at .3 microns or
larger
SYS-050-195
● Note: Available for EII Compact Cyclonic & Cyclonic Portables
Only (Hepa already exists on Compact Portable)
Brushless Motor - 8,000 Hrs
UPG-EIIBR
Prices subject to change without notice
800-265-3878
www.eurovac.com
10/12/2014
Eurovac - Aluminum Repair Certification Equipment
Aluminum Repair EII - Wet Scrubber
Portable
Eurovac
Part No.
Description
Eurovac II - 2.5HP Stainless Steel Wet Mix Dust Collector
Package (Capable of 2 Orbital Sander User System)
SYS-050Includes: one (1) 25' Hoses with airline, one (1) hose/tool
18300000
hanger, one (1) DA sander, one (1) 8” mud hog sander & one (1)
sandpaper starter package.
Compliance with NFPA Code 484 (Standard For Combustible
Metals)
System Uses: Source capture hand tools for aluminum dust
and housekeeping of aluminum dust.
● Blower: 2.5HP, 13.8 Amp, 1560 Watt Motor
● Vacuum Performance Test At Mid Water Level:
75 CFM at 60" WG
95 CFM at 50" WG
108 CFM at 40" WG
117 CFM at 30" WG
● Filtration: Initial venturi entry (for deep penetration of dust into
the water), secondary baffles (to help knock water/dust back
down) and final mesh mist eliminator filter (99% efficient to 5
microns)
● Manual Drain Valve: Includes 7' of 2" flex hose
● Water Level Indicator: Indicates when refill of water is
required
● Manual Water Intake Port
● Relief Valve: Exhausts hydrogen gas build-up in an aluminum
application
● Vacuum Switch: On/Off/Auto 3 Position Switch
● Electrical Cord with Plug: 15'
● Electrical: 115 Volt 1Ph 60Hz (US / Canada)
● Optional: Additional 25' Hose w/ air - $160
Width
1 26"
Aluminum Repair Central System
(Body Repair Cert.)
Depth
28"
Height
Weight
62.5" 330lbs (415lbs w/ 10gal of water)
Description
Eurovac
Part No.
Aluminum Repair Central
Eurovac I - 7HP 230/460v Wet Mix Combo Unit
(3 User Central Vac Sanding System)
SYS-030150CW000
Aluminum Repair Central
Eurovac I - 10HP 230/460v Wet Mix Combo Unit
(4 to 5 User Central Vac Sanding System)
SYS-030316CW000
Aluminum Repair Central
Eurovac 1 - 10HP 575v Wet Mix Combo Unit
(4 to 5 User Central Vac Sanding System)
SYS-030316CW000
Aluminum Repair Central
SYS-030Eurovac I - 20HP Wet Mix Combo Unit
318CW000
(6 User Central Vac Sanding System)
(24" Separator)
Eurovac I - High vacuum wet srubber for filtration of explosive
dust (eg. Aluminum repair).
Includes:
● Stand mount system which comes pre-wired from panel to
pump and to the pulse jet cleaning.
●18" x 85" stainless steel wet mix separator with venturi entry to
promote thorough mixing of dust with water
●Magnetic Starter with overload protection and step down to low
voltage wiring for automatic on/off switches when the inlet is
opened
●Automatic level control which adds water when necessary
●Coalescent filter to remove mist before it reaches the pump and
a stainless steel ball valve for removing the sludge.
● 208-240, 460 and 575 volts. 3 phase, 60 hertz.
● Includes silencer
Prices subject to change without notice
800-265-3878
www.eurovac.com
10/12/2014
Tool & Sandpaper Starter Packages
Description
Eurovac
Part No.
Dedicated Aluminium Dustless Sanding Tool/Paper
Package: 6” Alum. DA, 8” Alum Mud Hog & Aluminium
Sandpaper starter package
50-SPS8I
Dedicated Aluminium Dustless Sanding Tool/Paper
Package: 6” Alum. DA, Straightline Sander & Aluminium
Sandpaper starter package
50-SPS8I
Eurovac
Part No.
Aluminum Repair 1HP Fume Extractor Description
Boxair with 6" x 3m (9.84') Extension Hose Arm
SYS-07045006100
▪ Designed to capture, filter and exhaust air impurities created
during welding, metal processing or workshop activities.
▪ Two stage filtration system: Spark trap and a main disposable
high efficiency filter.
▪ Powder coated steel body and has four heavy duty casters to
help position the unit in the workspace.
HP
1
Airflow Wt with arm Dba
700
168
78
Voltage
115/1/60
RollOut with 6" x 3m (9.84') Arm & 14" Hood
SYS-07045106100
▪ Designed to capture, filter and exhaust air impurities created
during welding, metal processing or workshop activities.
▪ Three stage high end filtration; aluminum mesh pre-filter which
protects the cartridge filter from sparks and pre-filters the air,
followed by a spun bond polyester cartridge filter, and a final
carbon after filter.
▪ Manual compressed air pulse jet cleaning
cleaning.
HP
1.5
Aluminum Repair Fume Arm & Fan
(Structural Repair)
Airflow Wt with arm Dba
750
320
69
Voltage
per request
Description
Eurovac
Part No.
Aluminum Fume Arm & Fan Repair Package
SYS-000FUMEARM0
Includes the following:
● 6” x 14’ Fume Arm
● Wall Mount Bracket
● Lot Tube, Bends & Fittings
● 1 ½ HP Fan & Motor – single phase
*Extension Booms Available For Longer Reach
Prices subject to change without notice
800-265-3878
www.eurovac.com
10/12/2014
Work Stations, Extension Booms & Pendant Boxes:
Single Work Station
(Hanging or Wallmount)
Description
Eurovac
Part No.
Single Work Station with 30' of Tube, Bends & Fittings
SYS-030-500
Hanging Work Stations Include:
● 30' of Metal tube, bends & installation materials up in the
beams
● 2" x 12' Hose (Hanging drops only)
● Hanging Single Workstation inlet
Wallmounted Work Stations Include:
● 30' of Metal tube, bends & installation materials up in the
beams
●2" x 12' Metal tube down wall (Wall mount drops)
● Wall Mount Single Workstation Inlet
Notes:
● Based on 18' to 20' from floor to beams.
● EI & EII Systems - Inlet includes on/off microswitch to start and
stop the unit when the hose is plugged in into the inlet.
● EIII Systems - No microswitch provided on inlet.
Double Work Station
(Hanging or Wallmount)
Description
Eurovac
Part No.
Double Work Station with 30' of Tube, Bends & Fittings
SYS-030-550
Hanging Work Stations Include:
●30' of Metal tube, bends & installation materials up in the beams
● 2" x 12' Hose (Hanging drops only)
● Hanging Double Workstation inlet
Wallmounted Work Stations Include:
● 30' of Metal tube, bends & installation materials up in the
beams
● 2" x 12' Metal tube down wall (Wall mount drops)
● Double Wall Mount Workstation Inlet
Notes:
● Based on 18' to 20' from floor to beams.
● EI & EII Systems - Inlet includes on/off microswitch to start and
stop the unit when the hose is plugged in into the inlet
inlet.
● EIII Systems - No microswitch provided on inlet.
Articulated Extension Boom with
Double Work Station Pendant Box
Description
Eurovac
Part No.
15' Double Pivot Articulated Pendant - Arm Only
SYS-070100N
15' Double Pivot Articulated Pendant Arm - Includes 30' of
SYS-070-100
pipe, bends & Fittings
Articulated Pendant Arms add extra length and range to any work
area.
Arm Includes:
● Two vacuum inlets.
● Two compressed air inlets
● Two hose hangers
● 110v electrical outlet
Prices subject to change without notice
800-265-3878
www.eurovac.com
10/12/2014
Articulated Extension Boom with
Double Drop & Air
Double Work Station Pendant Box
Description
Eurovac
Part No.
10' Single Pivot Arm with DBL Drop & Air - Includes 30' of
pipe, bends & Fittings
15' Single Pivot Arm with DBL Drop & Air - Includes 30' of
pipe, bends & Fittings
10' Double Pivot Arm with DBL Drop & Air - Includes 30' of
pipe, bends & Fittings
15' Double Pivot Arm with DBL Drop & Air - Includes 30' of
pipe, bends & Fittings
Articulated Pendant Arms add extra length and range to any work
area.
Arm Includes:
● Two vacuum inlets.
● Two compressed air inlets
● Two hose hangers
● For EI & EII Systems: Inlets will include micro switches.
SYS-0306001000S
Description
Eurovac
Part No.
SYS-030610N
Pendant Work Station - Pendant Box Only
Pendant Work Station - Includes 30' Tube, Bends & Fittings
SYS-0306001500S
SYS-03060010000
SYS-03060015000
SYS-030-610
Misc.
Unistrut Adder For Spanning The Beams
The Pendant Work Station brings all your needs right to the
pendant box .
Pendant Includes (SYS-030-610N):
● Double work station with two vacuum inlets
● 2" x 10' Vacuum hose for connection to double work station and
tubing up at beams. Also includes 12' of ground strap and cable
ties (12' of low voltage wire if applicable)
● Two compressed air inlets
● 3/8" x 15' Flexible airline for connection to the two compressed
air inlets and customer supplied hard pipe up at the beams
● Two hose hangers
● 110v electrical outlet
● 5" x 10' Black chaser hose & ceiling flange w/ 5" collar
● For EI & EII Systems: Inlets will include micro switches.
Additional Tubes, Bends & Fittings Include (SYS-030-610):
● 30' of Metal Pipe, bends & fittings & installation materials
Hose not included
Extra Tubing Per Ft.
Description
Eurovac
Part No.
Extra Pipe with fittings - per ft.
SYS-030-400
Used when pricing up drops or additional piping for a system on
a per foot basis. Pricing includes all necessary fittings for
installation purposes.
Header Pipe Upgrade
Exhaust Ducting
Description
Eurovac
Part No.
Header Pipe for Eurovac I systems
SYS-030-421
Header Pipe for 15-25HP
SYS-030-422
Header Pipe for 30HP
SYS-030-423
Header Pipe for 40-75HP
SYS-030-423
Description
Eurovac
Part No.
4" Exhaust Duct Package (20' for wall or roof) 5HP to 10HP
● SAME PRICE TO GO WITH 4" RAIN CAP (MPF-RCS-040)
5" Exhaust Duct Package (20' for wall or roof) 15 to 25HP
● SAME PRICE TO GO WITH 5" RAIN CAP (MPF-RCS-050)
6" Exhaust Duct Package (20' for wall or roof) 25 to 30HP
● SAME PRICE TO GO WITH 6" RAIN CAP (MPF-RCS-060)
Prices subject to change without notice
800-265-3878
www.eurovac.com
SYS-EXHEI0005010
SYS-EXHEIII15025
SYS-EXHEIII25030
10/12/2014
Work Station Airline Assemblies:
Single Work Station Airline Assembly
Eurovac
Part No.
Description
Single Work Station Airline - 3/8" x 50'
Single Work Station Airline - 3/8" x 15'
Quick Disconnect - Single Wk. Stn.
SYS-03058538X50
SYS-03058538X15
UPG38SGL0QD
3/8” Single work station airline assemblies for attaching to the
hard pipe or air outlet on the wall, and for running to the inlets of
the work stations. Available in different lengths upon request.
*See Airline Catalog for different options.
*Quick Disconnects Extra
Eurovac
Part No.
Double Work Station Airline Assembly Description
Double Work Station Airline - 3/8" x 50'
Double Work Station Airline - 3/8" x 15'
Quick Disconnects - Double Wk. Stn.
SYS-03059038X50
SYS-03059038X15
UPG38DBL0QD
3/8” Double work station airline assemblies for attaching to the
hard pipe or air outlet on the wall, and for running to the inlets of
the work stations. Available in different lengths upon request.
*See Airline Catalog for different options.
*Quick Disconnects Extra
Prices subject to change without notice
800-265-3878
www.eurovac.com
10/12/2014
Hose Assemblies:
1 1/4" Work Hoses With Air
Eurovac
Part No.
Description
1 1/4" to 3/4" x 25' Anti-Static Hose with air
1 1/4" x 25' Anti-Static Hose with air
Quick Disconnects - Hose with air
HOS-03045612625
SYS-03045012525
UPGHWA000QD
● Designed specifically for use with hand tools with source
capture suction shrouds.
● Hoses include ¼” air lines attached to the vacuum hoses
whereby the the hose and airline become one unit.
● Available in different lengths upon request.
● Quick Disconnects Extra
1 1/2" Utility Hose (No Air)
Description
Vacuum Utility Hose - 1-1/2" x 25' no air
Eurovac
Part No.
SYS-05035015025
● Used for general clean up or detailing vehicles.
● Available in different lengths upon request.
Cleaning Packages
1 1/2" Shop Cleaning Package
Description
Shop Cleaning Package Anti-Static: Metal tools and RS hose
Eurovac
Part No.
SYS-05050010000
Includes:
● 1 1/2" x 25' Utility Hose
● 54" 2 Piece Wand
● 14" Floor Tool
● 11" Crevice Tool
1 1/2" Vehicle Cleaning Package
Description
Vehicle Cleaning Package: Plastic tools and R Hose
Eurovac
Part No.
SYS 050
SYS-05052000000
Includes:
● 1 1/2" x 25' Utility Hose
● 4 1/2" Claw Tool
● 11" Crevice Tool
● 5" Upholstery tool
● 3" Dust brush
1 1/4" Office Cleaning Package
Description
Office Cleaning Package: Plastic tools and R Hose
Eurovac
Part No.
SYS-05053000000
Includes:
● 1 1/4" x 25' Utility Hose
● Telescoping Wand
● 11" Rug Tool
● 11" Crevice Tool
● 5" Dust Brush
Prices subject to change without notice
800-265-3878
www.eurovac.com
10/12/2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement