powered to perform, created to overwhelm

07
AMPS/SUBWOOFERS/SPEAKERS
AMPLIFIERS
SUBWOOFERS
SPEAKERS
POWERED
TO PERFORM,
CREATED
TO OVERWHELM
Your amplifier and speaker system is the interface
between audio signals and your senses. So the quality of your components
will have a direct impact on the quality of sound you experience.
From crystalline highs to thundering lows, Clarion amps
and speakers deliver the sound of satisfaction.
Clarion Amps Feature
High Performance
Clarion’s 2007 amplifier line does it all – jaw-dropping
power, stunning sonic performance, industry leading
features and all at prices that will revolutionize
the industry. How was this achieved? The latest
technologies were combined with classic designs
for benchmark performance and stunning reliability.
Our new DPX11500 and DPX1800 amplifiers
feature a combination of Class G and Class H power
supplies and output stages – not just a simple Class
D design. This allows these amps to produce more
power (1500W and 800W respectively with CEA2006 compliance) while putting less load on your
cars electrical system. This means more power
to your speakers, no thermal shutdown problems
and longer play times than our competitors – at any
price. Is sonic purity your game? Clarion’s APX2180
and APX4360 amplifiers deliver with awesome
10Hz to 50kHz (±1dB) frequency response and
distortion numbers as low as 0.004%. All the time
offering a sonic signature that matches or betters
most amplifiers costing two or three times as much.
Looking for industry leading features? We offer
innovative features such as our three-stage Input
Voltage Selector gain control, Precise Frequency
Selector Crossover and even simple connectivity
with speaker level inputs on every model. The 2007
Clarion amplifier line shares the same cosmetic
theme from top to bottom – so you can mix and
match products to create the perfect system – at the
perfect price.
38 http://www.clarion.com
Clarion Subwoofers – the benchmark for performance, style and
value.
Low frequency extension, small enclosure
requirements and awesome power handling – just
three of the characteristics of the 2007 subwoofer
line. These subwoofers don’t just sound great, but
they look equally impressive. These subwoofers
feature an aggressively styled cast aluminum basket
for a rock solid foundation. The cones are formed
using a composite of pulp paper and kevlar. Linear
poly-cotton spiders with oversized tinsel leads
sewn to them ensure perfect piston-like operation.
Our electrolytically applied spun aluminum
polypropylene dust cap is reinforced with five
spokes that not only look cool, but add significant
strength. The copolymer composite surround allows
awesome driver excursion, combined with the
longevity and durability of rubber and the flexibility
of foam. The 2007 line of subwoofers can handle
serious power. Spider Exhaust Technology, a
vented pole piece and high temperature voice coil
formers allow the 15″ PXW1552 to handle 1,500W
of maximum music power, while the 10″ and 12″
versions will handle 1,000W without damage to the
voice coil or suspension component failure. Many of
the technologies and features found in the PXW line
of subwoofers trickles down into the new SRW and
SW series subwoofers. Clarion subwoofers offer
stunning performance and awesome styling – all at
prices that embarrass the competition.
Clarion Speakers Span the
Spectrum from Bass to Treble
Subwoofers sometimes steal the spotlight, but you
can’t get great sound without great speakers for
midrange and high frequencies. Clarion’s plate,
coaxial, and component speakers utilize titaniummetallized mica-injection polypropylene woofer
cones with powerful strontium magnets for bass,
metallized balanced-drive tweeters with neodymium
magnets for treble, and high technology from top to
bottom. Two-way, three-way and four-way speakers
meet the needs of different listeners and different
vehicles. Clarion’s speakers include OEM upgrades
(those designed to replace OEM speakers that were
installed in vehicles when they are built at the factory)
and component speakers designed for custom AV
mobile-entertainment systems. For example, the
SRS1686 two-way component speakers combine a
¾″ silk-dome tweeter with a 6-½″ glass-fiber-cone
woofer and a two-way crossover network attenuating
signals outside the passband with a slope of 12 dB
per octave. And these speakers will take 250 watts
of maximum music power.
http://www.clarion.com
39
When it comes to amplifiers, few offer the technology and performance that Clarion does. Our DPX Series of amplifiers provide massive amounts of pure, clean
power thanks to a Class G computer-controlled power supply. You get the efficiency of a Class D amplifier with the sound quality of a Class AB design. Add to
this integrated electronic crossovers, speaker level inputs and much more in every amplifier we make. Your system deserves amplifiers that sound this good.
Power, Control and Efficiency combine for an unheard of value.
DPX11500
APX4360
APX2180
1500W MONO POWER AMPLIFIER
640W 4/3/2 CHANNEL POWER AMPLIFIER
320W 2/1 CHANNEL POWER AMPLIFIER
• 1500W × 1 Into 1 Ohm, 20Hz-250Hz • 1500W × 1
Into 2 Ohms, 20Hz-250Hz • 800W × 1 Into 4 Ohms,
20Hz-250Hz • Input Voltage Selector Gain Control
• Precise Frequency Selector -12db/Oct. Low Pass
Crossover, 50-250Hz • Adjustable Subsonic Filter, 1080Hz • Variable Bass Boost; 0-15dB @ 30-125Hz
• Gold Plated Connectors; RCA/Speaker/Power
• Speaker Level Input • Dimensions 21-1/4″ × 12″ ×
2-7/8″
• 640 Watts of Maximum Music Power • 90W × 4 Into 4 Ohms, 20Hz-20kHz @ <
0.05%THD • 160W × 4 Into 2 Ohms, 20Hz-20kHz @ < 0.2%THD • Bridgeable,
300W × 2, 20Hz-20kHz @ < 0.2%THD • Mixed Mode Operation • Input Voltage
Selector • Precise Frequency Selector • Variable Bass Boost; 0-15dB @ 50Hz
• Independent Front/Rear Adjustable -12db/Oct. High/Low Pass Crossovers, 55Hz550Hz or 550Hz-5.5kHz with the Crossover Frequency Multiplier • Gold Plated
Connectors; RCA/Speaker/Power • Speaker Level Input • Dimensions 16″ × 12″ ×
2-7/8″
• 320 Watts of Maximum Music Power • 90W × 2 Into 4 Ohms, 20Hz-20kHz @ <
0.05%THD • 160W × 2 Into 2 Ohms, 20Hz-20kHz @ < 0.2%THD • Bridgeable,
300W × 1, 20Hz-20kHz @ < 0.2%THD • Mixed Mode Operation • Input Voltage
Selector • Precise Frequency Selector • Variable Bass Boost; 0-15dB @ 50Hz
• Adjustable -12db/Oct. High/Low Pass Crossover, 55Hz-550Hz or 550Hz-5.5kHz
with the Crossover Frequency Multiplier • Gold Plated Connectors; RCA/Speaker/
Power • Speaker Level Input • Dimensions 12″ × 12″ × 2-7/8″
CEA 2006 Power Ratings
160W × 4RMS [2Ω@14.4V ≤1% THD+N]
90W × 4RMS [4Ω@14.4V ≤1% THD+N]
S/N 93dB (Ref:1W into 4Ω)
CEA 2006 Power Ratings
160W × 2RMS [2Ω@14.4V ≤1% THD+N]
90W × 2RMS [4Ω@14.4V ≤1% THD+N]
S/N 93dB (Ref:1W into 4Ω)
CEA 2006 Power Ratings
1500W × 1RMS [2Ω@14.4 ≤1% THD+N]
800W × 1RMS [4Ω@14.4V ≤1% THD+N]
S/N 72dB (Ref:1W into 4Ω)
DPX1800
CEA 2006 Power Ratings
800W × 1RMS [2Ω@14.4V ≤1% THD+N]
450W × 1RMS [4Ω@14.4V ≤1% THD+N]
S/N 79dB (Ref:1W into 4Ω)
40 http://www.clarion.com
APX2120
APX1300
200W 2/1 CHANNEL POWER AMPLIFIER
400W MONO POWER AMPLIFIER
• 400 Watts of Maximum Music Power
• 60W × 4 Into 4 Ohms, 20Hz-20kHz @ < 0.1%THD
• 90W × 4 Into 2 Ohms, 20Hz-20kHz @ < 0.1%THD
• Selectable Bass Boost; 0dB/6dB/12dB @ 50Hz
• Independent Front/Rear Adjustable -12db/Oct.
High/Low Pass Crossover, 50Hz-300Hz • Gold Plated
Connectors; RCA/Speaker/Power • Speaker Level
Inputs • Dimensions 13″ × 10-7/8″ × 2-3/4″
800W MONO POWER AMPLIFIER
• 800W × 1 Into 1 Ohm, 20Hz-250Hz • 700W × 1 Into
2 Ohms, 20Hz-250Hz • 450W × 1 Into 4 Ohms, 20Hz250Hz • Input Voltage Selector Gain Control • Precise
Frequency Selector -12db/Oct. Low Pass Crossover,
50-250Hz • Adjustable Subsonic Filter, 10-80Hz •
Variable Bass Boost; 0-15dB @ 30-125Hz
• Gold Plated Connectors; RCA/Speaker/Power
• Speaker Level Input • Dimensions 19-1/4″ × 12″×
2-7/8″
APX4240
400W 4/3/2 CHANNEL POWER AMPLIFIER
CEA 2006 Power Ratings
90W × 4RMS [2Ω@14.4V ≤1% THD+N]
60W × 4RMS [4Ω@14.4V ≤1% THD+N]
S/N 80dB (Ref:1W into 4Ω)
DPX2250
400W 2/1 CHANNEL POWER AMPLIFIER
• 400 Watts of Maximum Music Power • 125W × 2 Into
4 Ohms, 20Hz-20kHz @ < 0.05%THD • 250W × 2 Into
2 Ohms, 20Hz-20kHz @ < 0.1%THD • Bridgeable,
400W × 1, 20Hz-20kHz @ < 0.2%THD • Input
Voltage Selector Gain Control • Precise Frequency
Selector -12db/Oct. Low Pass Crossover, 50-250Hz
• Adjustable Subsonic Filter, 10-80Hz • Variable
Bass Boost; 0-15dB @ 30-125Hz • Gold Plated
Connectors; RCA/Speaker/Power • Speaker Level
Input • Dimensions 13-1/4″ × 12″ × 2-7/8″
• 200 Watts of Maximum Music Power • 60W × 2 Into
4 Ohms, 20Hz-20kHz @ < 0.1%THD • 90W × 2 Into 2
Ohms, 20Hz-20kHz @ < 0.1%THD • Selectable Bass
Boost; 0dB/6dB/12dB @ 50Hz • Adjustable -12db/
Oct. High/Low Pass Crossover, 50Hz-300Hz • Gold
Plated Connectors; RCA/Speaker/Power • Speaker
Level Input • Dimensions 10-5/8″ × 10-7/8″ × 2-3/4″
CEA 2006 Power Ratings
200W × 2RMS [2Ω@14.4V ±1% THD+N]
125W × 2RMS [4Ω@14.4V ±1% THD+N]
S/N 69dB (Ref:1W into 4Ω)
Model
Number of Channels
Maximum Power Output
MOS-FET Power Supply
4-Ohm, 20Hz-20kHz
2-Ohm, 20Hz-20kHz
Bridged, 20Hz-20kHz
2-Ohm Stable
2-Ohm Mono Stable
Varible Bass Boost Control
Gold Plated Connections
Speaker Level Input
Dimensions (W″ × L″ × H″)
CEA 2006 Power Ratings
100W × 2RMS [2Ω@14.4V ≤1% THD+N]
60W × 2RMS [4Ω@14.4V ≤1% THD+N]
S/N 85dB (Ref:1W into 4Ω)
DPX11500
DPX1800
•
•
•
•
•
21-1/4 × 12 × 2-7/8
•
•
•
•
•
19-1/4 × 12 × 2-7/8
1
1500w
•
800w × 1
1500w × 1
• 400 Watts of Maximum Music Power
• 300W × 1 Into 4 Ohms, 20Hz-300Hz @ < 0.1%THD
• 400W × 1 Into 2 Ohms, 20Hz-300Hz @ < 0.1%THD
• Selectable Bass Boost; 0dB/6dB/12dB @ 50Hz
• Adjustable -12db/Oct. Low Pass Crossover @ 50Hz300Hz • Gold Plated Connectors; RCA/Speaker/
Power • Speaker Level Input • Dimensions 13″ ×
10-7/8″ × 2-3/4″
1
800w
•
450w × 1
800w × 1
DPX2250
2/1
400w
•
125w × 2
200w × 2
400w × 1
•
•
•
•
13-1/4 × 12 × 2-7/8
APX4360
4/3/2
640w
•
90w × 4
150w × 4
300w × 2
•
•
•
•
16 × 12 × 2-7/8
APX2180
2/1
320w
•
90w × 2
150w × 2
300w × 1
•
•
•
•
12 × 12 × 2-7/8
CEA 2006 Power Ratings
500W × 1RMS [2Ω@14.4V ≤1% THD+N]
300W × 1RMS [4Ω@14.4V ≤1% THD+N]
S/N 68dB (Ref:1W into 4Ω)
APX4240
APX2120
APX1300
•
•
•
•
•
13 × 10-7/8 × 2-3/4
•
•
10-5/8 × 10-7/8 × 2-3/4
•
•
13 × 10-7/8 × 2-3/4
4/3/2
400w
•
60w × 4
90w × 4
2/1
200w
•
60w × 2
90w × 2
1
400w
•
300w × 1
400w × 1
http://www.clarion.com
41
Our designers and engineers don’t just think about bass, they live, eat and breathe it. From the subtle nuances of an acoustic string bass to the mirror shaking
beats of a synthesizer or drum machine. Featuring quality construction and ingenuity, Clarion subwoofers are up to the task. Our PXW and SRW Subwoofers
offer incredible performance and value exceed the expectations of the most concerning listener, you!
Subwoofers that sound as good as they look
PXW1552
SRW1252
15″ DUAL 4-OHM VOICE COIL SUBWOOFER
• 1500 Watts of Maximum Music Power • 750 Watts RMS
• Dual 4-Ohm Heat Resistant Voice Coils • Polypropylene
Electrolytic Spun Aluminum Coated Dust Cap Design • Kevlar/
Paper Composite Cone Design • Co-polymer Composite
High Excursion Surround • Dual Strontium Ferrite Magnet
Motor Assembly • Hyper-extended Vented Pole Piece • Dual
Gold Plated Block Terminals • Linear Poly-cotton Spider with
Integrated Tinsel Leads • S.E.T. (Spider Exhaust Technology)
Cooling • Custom Designed Die Cast Aluminum • Hidden
Screw Mounting Gasket • Outside Dimension 15-3/8″
• Mounting Depth 7″
PXW1251
12″ DUAL 4-OHM VOICE COIL SUBWOOFER
• 800 Watts Maximum Music Power • 400 Watts RMS • Dual 4
Ohm Heat Resistant Voice Coils • Polypropylene Electronic Spun
Aluminum Dust Cap • Fiber Glass / Paper Cone Design • Nitrile
Butadiene Rubber High Excursion Surround • Dual Strontium
Ferrite Magnets • Hyper Extended Vented Pole Piece • Spider
Exhaust Technology (SET) Cooling • Dual Gold Plated Terminal
Blocks • Linear Cotton Spider with Integrated Tinsel leads
• Custom Stamped Steel Powder Coated Chassis
PXW1252
12″ DUAL 4-OHM VOICE COIL SUBWOOFER
SRW1251
• 1000 Watts of Maximum Music Power • 500 Watts RMS
• Dual 4-Ohm Heat Resistant Voice Coils • Polypropylene
Electrolytic Spun Aluminum Coated Dust Cap Design • Kevlar/
Paper Composite Cone Design • Co-polymer Composite
High Excursion Surround • Dual Strontium Ferrite Magnet
Motor Assembly • Hyper-extended Vented Pole Piece • Dual
Gold Plated Block Terminals • Linear Poly-cotton Spider with
Integrated Tinsel Leads • S.E.T. (Spider Exhaust Technology)
Cooling • Custom Designed Die Cast Aluminum • Hidden
Screw Mounting Gasket • Outside Dimension 12-3/8″
• Mounting Depth 6-3/8″
12″ SINGLE 4-OHM
VOICE COIL SUBWOOFER
SRW1052
12″ DUAL 2-OHM
VOICE COIL SUBWOOFER
10″ DUAL 4-OHM VOICE COIL SUBWOOFER
• 1000 Watts of Maximum Music Power • 500
Watts RMS • Dual 2-Ohm Heat Resistant
Voice Coils • Polypropylene Electrolytic Spun
Aluminum Coated Dust Cap Design • Kevlar/
Paper Composite Cone Design • Co-polymer
Composite High Excursion Surround • Dual
Strontium Ferrite Magnet Motor Assembly •
Hyper-extended Vented Pole Piece • Dual Gold
Plated Block Terminals • Linear Poly-cotton
Spider with Integrated Tinsel Leads • S.E.T.
(Spider Exhaust Technology) Cooling • Custom
Designed Die Cast Aluminum • Hidden Screw
Mounting Gasket • Outside Dimension 12-3/8″
• Mounting Depth 6-3/8″
PXW1052
Model
Max Power Handling
Continuous Power Handling
Frequency Response
Efficiency
Basket Type
# of Voice Coils
Impedance
Outside Dimension
Cut Out Size
Mounting Depth
Enclosure Size
42 http://www.clarion.com
PXW1552
1500w
750w
20Hz-1.5kHz
90dB
Die Cast Aluminum
2
4 Ohm
15-3/8″
14″
7″
1.5 Cu Ft
10″ DUAL 2-OHM VOICE COIL SUBWOOFER
• 1000 Watts of Maximum Music Power • 500 Watts RMS •
Dual 2-Ohm Heat Resistant Voice Coils
• Polypropylene Electrolytic Spun Aluminum Coated Dust Cap
Design • Kevlar/Paper Composite Cone Design • Co-polymer
Composite High Excursion Surround • Dual Strontium Ferrite
Magnet Motor Assembly • Hyper-extended Vented Pole
Piece • Dual Gold Plated Block Terminals • Linear Poly-cotton
Spider with Integrated Tinsel Leads • S.E.T. (Spider Exhaust
Technology) Cooling • Custom Designed Die Cast Aluminum
• Hidden Screw Mounting Gasket
• Outside Dimension 10-3/8″ • Mounting Depth 5-1/2″
10″ SINGLE 4-OHM VOICE COIL SHALLOW
SUBWOOFER
• 1000 Watts of Maximum Music Power • 500 Watts
RMS • Dual 4-Ohm Heat Resistant Voice Coils •
Polypropylene Electrolytic Spun Aluminum Coated
Dust Cap Design • Kevlar/Paper Composite Cone
Design • Co-polymer Composite High Excursion Surround • Dual Strontium Ferrite Magnet Motor Assembly
• Hyper-extended Vented Pole Piece • Dual Gold
Plated Block Terminals • Linear Poly-cotton Spider
with Integrated Tinsel Leads • S.E.T. (Spider Exhaust
Technology) Cooling • Custom Designed Die Cast
Aluminum • Hidden Screw Mounting Gasket • Outside
Dimension 10-3/8″ • Mounting Depth 5-1/2″
• 600 Watts of Maximum Music Power • 300 Watts
RMS• Single 4-Ohm Heat Resistant Voice Coils
• Polypropylene Electrolytic Spun Aluminum Coated
Dust Cap Design • Kevlar/Paper Composite Cone
Design • Co-polymer Composite High Excursion
Surround • Dual Strontium Ferrite Magnet Motor
Assembly • Hyper-extended Vented Pole Piece• Dual
Gold Plated Block Terminals • Linear Poly-cotton
Spider with Integrated Tinsel Leads • S.E.T. (Spider
Exhaust Technology) Cooling • Custom Designed Die
Cast Aluminum • Hidden Screw Mounting Gasket •
Outside Dimension 10-3/8″ • Mounting Depth 3″
PXW1252
1000w
500w
20Hz-1.5kHz
87dB
Die Cast Aluminum
2
4 Ohm
12-3/8″
10-7/8″
6-3/8″
0.85 Cu Ft
• 750 Watts Maximum Music Power • 375 Watts RMS • Dual
4 Ohm Heat Resistant Voice Coils • Polypropylene Electronic
Spun Aluminum Dust Cap • Fiber Glass / Paper Cone Design
• Nitrile Butadiene Rubber High Excursion Surround • Dual
Strontium Ferrite Magnets • Hyper Extended Vented Pole Piece
• Spider Exhaust Technology
PXW1051
PFW1051
10″ DUAL 4-OHM VOICE COIL SUBWOOFER
• 800 Watts Maximum Music Power • 400 Watts RMS • Single 4
Ohm Heat Resistant Voice Coil • Polypropylene Electronic Spun
Aluminum Dust Cap • Fiber Glass / Paper Cone Design • Nitrile
Butadiene Rubber High Excursion Surround • Dual Strontium
Ferrite Magnets • Hyper Extended Vented Pole Piece • Spider
Exhaust Technology (SET) Cooling • Dual Gold Plated Terminal
Blocks • Linear Cotton Spider with Integrated Tinsel leads
• Custom Stamped Steel Powder Coated Chassis
PXW1052
1000w
500w
20Hz-1.5kHz
84dB
Die Cast Aluminum
2
4 Ohm
10-3/8″
9-1/16″
5-1/2″
0.6 Cu Ft
PXW1251
1000w
500w
20Hz-1.5kHz
87dB
Die Cast Aluminum
2
2 Ohm
12-3/8″
10-7/8″
6-3/8″
0.85 Cu Ft
PXW1051
1000w
500w
20Hz-1.5kHz
84dB
Die Cast Aluminum
2
2 Ohm
10-3/8″
9-1/16
5-1/2″″
0.6 Cu Ft
PFW1051
600w
300w
20Hz-1.5kHz
84dB
Die Cast Aluminum
1
4 Ohm
10-3/8″
9-1/16
3″
0.5 Cu Ft
SRW1051
10″ SINGLE 4-OHM VOICE COIL SUBWOOFER
• 750 Watts Maximum Music Power • 375 Watts RMS
• Single 4 Ohm Heat Resistant Voice Coils
• Polypropylene Electronic Spun Aluminum Dust Cap
• Fiber Glass / Paper Cone Design • Nitrile Butadiene
Rubber High Excursion Surround • Dual Strontium Ferrite
Magnets • Hyper Extended Vented Pole Piece • Spider
Exhaust Technology (SET) Cooling • Dual Gold Plated
Terminal Blocks • Linear Cotton Spider with Integrated
Tinsel leads • Custom Stamped Steel Powder Coated
Chassis
Model
Max Power Handling
Continuous Power Handling
Frequency Response
Efficiency
Basket Type
# of Voice Coils
Impedance
Outside Dimension
Cut Out Size
Mounting Depth
Enclosure Size
SFW1051
SFW1051
10″ SINGLE 4-OHM VOICE COIL
SHALLOW MOUNT SUBWOOFER
• 600 Watts Maximum Music Power • 300 Watts RMS • Single 4 Ohm Heat Resistant
Voice Coil • Polypropylene Electronic Spun Aluminum Dust Cap • Fiber Glass / Paper
Cone Design • Nitrile Butadiene Rubber High Excursion Surround • Strontium Ferrite
Magnets • Hyper Extended Vented Pole Piece • Spider Exhaust Technology (SET)
Cooling • Dual Gold Plated Terminal Blocks • Linear Cotton Spider with Integrated
Tinsel leads • Custom Shallow Stamped Steel Powder Coated Chassis
SRW1252
SRW1052
SRW1251
SRW1051
http://www.clarion.com
43
Clarion has taken the best features and technologies from the awesome PXW and SRW subwoofers and incorporated them into the SW subwoofers. High power
handling, cool styling and awesome low frequency output is the result. When it’s time to start building your subwoofer system, it’s time to look at Clarion.
Clarion has spent decades refining our loudspeakers. We combine high quality materials like bidirectional glassfiber and silk with our In-Phase design to produce a series of speakers that allows you to hear the detail in your music like you’ve never heard it before.
A new benchmark for value and performance
Hear your music again, for the first time
SW1251
SW1051
12″ SINGLE 4-OHM VOICE COIL SUBWOOFER
10″ SINGLE 4-OHM VOICE COIL SUBWOOFER
• 700 Watts Maximum Music Power • 250 Watts
RMS • Single 4 Ohm Heat Resistant Voice Coil
• Polypropylene Electronic Spun Aluminum Dust
Cap • Fiber Glass / Paper Cone Design • Nitrile
Butadiene Rubber High Excursion Surround
• Dual Strontium Ferrite Magnets • Hyper
Extended Vented Pole Piece • Spider Exhaust
Technology (SET) Cooling • Dual Gold Plated
Terminal Blocks • Linear Cotton Spider with
Integrated Tinsel leads • Custom Stamped Steel
Powder Coated Chassis
• 600 Watts Maximum Music Power • 300 Watts RMS
• Single 4 Ohm Heat Resistant Voice Coil
• Polypropylene Electronic Spun Aluminum Dust Cap
• Fiber Glass / Paper Cone Design • Nitrile Butadiene
Rubber High Excursion Surround • Dual Strontium
Ferrite Magnets • Hyper Extended Vented Pole Piece
• Spider Exhaust Technology (SET) Cooling • Dual
Gold Plated Terminal Blocks • Linear Cotton Spider
with Integrated Tinsel leads • Custom Stamped Steel
Powder Coated Chassis
SRS1686
SRR1686
SRR6986
6-1/2″ 2-WAY COMPONENT SPEAKER SYSTEM
6-1/2″ COAXIAL 2-WAY SPEAKER
6″ × 9″ COAXIAL 2-WAY SPEAKER
• 250 Watts of Maximum Music Power • High Grade
-12dB/oct. Crossover Network with Level Attenuator •
GM Fit Basket Design / Chrysler Adaptor Included • 61/2″ Bidirectional Glass-Fiber Woofer Cone • Rubber
Surround • Powerful Strontium Magnet for Dynamic
Bass Response • 3/4″ Pure Silk Dome Tweeter • Dual
Neodymium Magnets • High Frequency Reproduction
(up to 120kHz) • Custom Fit Tweeter Brackets
Included (Flush, Surface)
Model
Max Power Handling
Continuous Power Handling
Frequency Response
Efficiency
Basket Type
# of Voice Coils
Impedance
Outside Dimension
Cut Out Size
Mounting Depth
Enclosure Size
SW1251
700W
250W
SW1051
600W
300W
• 250 Watts of Maximum Music Power • “In-Phase”
Coaxial Design for High End Sound and Imaging
• GM fit basket design / Chrysler Adaptor Included
• 6-1/2″ Bidirectional Glass-Fiber Woofer Cone
• Rubber Surround • Powerful Strontium Magnet
for Dynamic Bass Response • 3/4″ Pure Silk
Dome Tweeter • Dual Neodymium Magnets • High
Frequency Reproduction (up to 120kHz)
• 350 Watts of Maximum Music Power • “In-Phase”
Coaxial Design for High End Sound and Imaging • 6″
× 9″ Bidirectional Glass-Fiber Woofer Cone • Rubber
Surround • Powerful Strontium Magnet for Dynamic
Bass Response • 1″ Pure Silk Dome Tweeter • Dual
Neodymium Magnets • High Frequency Reproduction
(up to 80kHz)
SW303
120W(60W+60W)Output
64W (32W+32W) Output
30/200Hz
2
13″(W) × 2-7/8″(H) × 9 -6/1″(D)
-
POWERED SUBWOOFER
SRV303
8″ AMPLIFIED SUBWOOFER
• 120 Watts of Maximum Music Power
• 8″ Counter Drive Subwoofer
• Selectable Crossover(50/75/100/120Hz)
• Detachable Control Panel
• Adjustable Input Gain
• Selectable Phasing
• RCA and Speaker Level Inputs
Counter drive structure
Normal woofer
Magnet
Magnet
Counter drive
SRR1386
SRC5796
SRC4696
5-1/4″ COAXIAL 2-WAY SPEAKER
5″ × 7″ 2-WAY PLATE SPEAKER
4″ × 6″ 2-WAY PLATE SPEAKER
• 200 Watts of Maximum Music Power • “In-Phase”
Coaxial Design for High End Sound and Imaging
• 5-1/4″ Bidirectional Glass-Fiber Woofer Cone•
Rubber Surround • Powerful Strontium Magnet
for Dynamic Bass Response • 3/4″ Pure Silk
Dome Tweeter • Dual Neodymium Magnets • High
Frequency Reproduction (up to 120kHz)
• 170 Watts of Maximum Music Power • Designed for
Direct OEM Replacement • 5″ Bidirectional GlassFiber Woofer Cone • Rubber Surround • Powerful
Strontium Magnet for Dynamic Bass Response • 3/4″
Pure Silk Dome Tweeter • Dual Neodymium Magnets
• High Frequency Reproduction (up to 120kHz)
• 150 Watts of Maximum Music Power • Designed for
Direct OEM Replacement • 4″ Bidirectional GlassFiber Woofer Cone • Rubber Surround • Powerful
Strontium Magnet for Dynamic Bass Response • 3/4″
Pure Silk Dome Tweeter • Dual Neodymium Magnets
• High Frequency Reproduction (up to 120kHz)
Downsizing
Subwoofer Cooling
Heat is the number one enemy of a subwoofer. All of Clarions subwoofers feature Spider Exhaust Technology to allow hot air to escape from the outside
of the voice coil assembly. Vented pole pieces allow airflow through the center of the motor structure to further improve power handling. Finally, high
temperature voice coil formers take the forefront in the battle against heat building up in the voice coil. These features combine to reduce thermal compression (reduced output because of heat) and ensure reliable operation.
44 http://www.clarion.com
Model
Max. Input (W)
Efficiency (dB/W/m)
Freqency Response (Hz)
Mounting Depth (mm)
Mounting Depth (inch)
SRS1686
250
91
28/120K
60.5
2-3/8
SRR1686
250
90
30/120K
60
2-3/8
SRR6986
350
92
25/80K
79
3-1/8
SRR1386
200
90
35/120K
51.5
2-1/16
SRC5796
170
90
35/120K
52
2-1/16
SRC4696
150
90
40/120K
47
1-7/8
http://www.clarion.com
45
Don’t settle for mediocre sound – upgrade your factory-installed speakers and experience music the way it was meant to be heard. From woofer cones that are
Titanium coated for UV protection and Mica Injected for strength and thermal stability to our Poly Ether Imide tweeter cones that retain their shape even at high
power levels, Clarion Phaze 1 speakers are designed to perform.
Clarion redefines the definition of factory replacement speakers. This accomplished by utilizing mica-injection polypropylene woofer material provides bass
response with a snap, unlike a paper cone material. And to avoid the harsh high frequencies, a Poly Ether Imide tweeter is incorporated into the design. Put
the stock speakers where they belong, in the trashcan.
Upgrade to excellence The best value in upgrade speakers
Factory replacement speakers – with a kick!
SRS1626
SRS1326
SRR6946
SRR1616
6-1/2″ 2-WAY COMPONENT SPEAKER SYSTEM
5-1/4″ 2-WAY COMPONENT SPEAKER SYSTEM
6″ × 9″ MULTIAXIAL 4-WAY SPEAKER
• 200 Watts of Maximum Music Power • 6-1/2″ Titanium
Metallized Mica-Injection Polypropylene Woofer Cone
• 1″ PEI Balanced Drive Tweeter • Powerful Strontium
Magnet for Dynamic Bass Response • In-Line –6dB/oct.
Crossover Network • Custom Fit Tweeter Brackets
Included (Flush, Surface) • GM fit basket design /
Chrysler Adaptor Included
• 200 Watts of Maximum Music Power • 5-1/4″ Titanium
Metallized Mica-Injection Polypropylene Woofer Cone
• 1″ PEI Balanced Drive Tweeter • Powerful Strontium
Magnet for Dynamic Bass Response
• In-Line –6dB/oct. Crossover Network • Custom Fit
Tweeter Brackets Included (Flush, Surface)
6-1/2″ COAXIAL 2-WAY SPEAKER
• 350 Watts of Maximum Music Power • 6″ × 9″ Titanium
Metallized Mica-Injection Polypropylene Woofer Cone
• 2-5/8″ Metallized PEI Balanced Drive Midrange • 5/8″
Dome Tweeter and Super Dome Tweeter • Powerful
Strontium Magnet for Dynamic Bass Response
SRR1646
SRR1636
SRC6836
6-1/2″ MULTIAXIAL 4-WAY SPEAKER
6-1/2″ MULTIAXIAL 3-WAY SPEAKER
6″ × 8″ CUSTOM FIT MULTIAXIAL3-WAY SPEAKER
• 280 Watts of Maximum Music Power • 6-1/2″ Titanium
Metallized Mica-Injection Polypropylene Woofer Cone •
1-3/16″ Metallized PEI Balanced Drive Midrange • 5/8″
Dome Tweeter and Super Dome Tweeter • Powerful
Strontium Magnet for Dynamic Bass Response• GM fit
basket design / Chrysler Adaptor Included
SRC5736
SRH206
5″ × 7″ CUSTOM FIT MULTIAXIAL 3-WAY SPEAKER
• 200 Watts of Maximum Music Power • 5″ × 7″
Titanium Metallized Mica-Injection Polypropylene
Woofer Cone • 1″ PEI Balanced Drive Midrange • 5/16″
PEI Balanced Drive Dome Tweeter • Powerful Strontium
Magnet for Dynamic Bass Response • Designed for
Direct OEM Replacement
Model
Max. Input (W)
Efficiency (dB/W/m)
Freqency Response (Hz)
Mounting Depth (mm)
Mounting Depth (inch)
• 230 Watts of Maximum Music Power • 6-1/2″ Titanium
Metallized Mica-Injection Polypropylene Woofer Cone
• 1-3/16″ PEI Balanced Drive Midrange • 5/16″ PEI
Balanced Drive Dome Tweeter • Powerful Strontium
Magnet for Dynamic Bass Response • GM fit basket
design / Chrysler Adaptor Included
SRS1626
200
91
30/35K
57.5
2-5/16
46 http://www.clarion.com
SRS1326
200
90
40/35K
46
1-13/16
SRH292HX
1″ BALANCED DRIVE TWEETER
• 200 Watts of Maximum Music Power
• 1″ Metallized PEI Balanced Drive Tweeter • Powerful
Neodymium Magnet for Dynamic Response • In-Line
–6dB/oct. Crossover Network • Custom Fit Tweeter
Brackets Included (Flush, Surface)
SRR6946
350
92
28/35K
74
2-15/16
SRR1646
280
91
30/35K
55.5
2-3/16
• 220 Watts of Maximum Music Power • 6″ × 8″
Titanium Metallized Mica-Injection Polypropylene
Woofer Cone • 1″ PEI Balanced Drive Midrange • 5/16″
PEI Balanced Drive Dome Tweeter • Powerful Strontium
Magnet for Dynamic Bass Response • Designed for
Direct OEM Replacement
SRR1636
230
91
30/32K
55.5
2-3/16
SRC6836
220
92
30/32K
60
2-3/8
3/4″ DOME TWEETER
• 250 Watts of Maximum Music Power • 3/4″ Pure
Silk Dome Tweeter • In-Line -6dB/oct. Crossover
Network • Dual Neodymium Magnets • High Frequency
Reproduction (up to 120kHz) • Custom Fit Tweeter
Brackets Included (Flush, Surface)
SRC5736
200
92
35/32K
54
2-1/8
SRH206
200
90
2.5/32K
18
11/16
SRH292HX
250
90
2K/120K
17.5
11/16
SRR6916
6″ × 9″ MULTIAXIAL 3-WAY SPEAKER
• 180 Watts of Maximum Music Power • 6-1/2″
Mica-Injection Polypropylene Woofer Cone • 1″ PEI
Balanced Drive Tweeter • Powerful Strontium Magnet
for Dynamic Bass Response • GM fut basket design /
Chrysler Adaptor Included
• 250 Watts of Maximum Music Power • 6″ × 9″ MicaInjection Polypropylene Woofer Cone • 2-5/8″ PEI
Midrange Cone • 5/8″ PEI Dome Tweeter • Powerful
Strontium Magnet for Dynamic Bass Response
SRC6816
SRC5716
SRC4617
6″ × 8″ CUSTOM FIT
COAXIAL 2-WAY SPEAKER
5″ × 7″ CUSTOM FIT
COAXIAL 2-WAY SPEAKER
4″ × 6″ CUSTOM FIT
COAXIAL 2-WAY SPEAKER
• 170 Watts of Maximum Music Power • 6″ × 8″
Mica-Injection Polypropylene Woofer Cone • 1″ PEI
Balanced Drive Tweeter • Powerful Strontium Magnet
for Dynamic Bass Response • Designed for Direct
OEM Replacement
• 150 Watts of Maximum Music Power • 5″ × 7″
Mica-Injection Polypropylene Woofer Cone • 1″ PEI
Balanced Drive Tweeter • Powerful Strontium Magnet
for Dynamic Bass Response • Designed for Direct
OEM Replacement
• 120 Watts of Maximum Music Power • 4″ × 6″
Mica-Injection Polypropylene Woofer Cone • 1″ PEI
Balanced Drive Tweeter • Powerful Strontium Magnet
for Dynamic Bass Response • Designed for Direct
OEM Replacement
SRR1316
SRR1016
SRC916
5-1/4″ COAXIAL 2-WAY SPEAKER
4″ COAXIAL 2-WAY SPEAKER
3-1/2″ CUSTOM FIT COAXIAL 2-WAY SPEAKER
• 150 Watts of Maximum Music Power • 5-1/4″
Mica-Injection Polypropylene Woofer Cone • 1″ PEI
Balanced Drive Tweeter • Powerful Strontium Magnet
for Dynamic Bass Response
Model
Max. Input (W)
Efficiency (dB/W/m)
Freqency Response (Hz)
Mounting Depth (mm)
Mounting Depth (inch)
SRR1616
180
91
30-30K
46.5
1-7/8
SRS6916
250
92
28-32K
72
2-13/16
• 120 Watts of Maximum Music Power • 4″ MicaInjection Polypropylene Woofer Cone • 1″ PEI
Balanced Drive Tweeter • Powerful Strontium Magnet
for Dynamic Bass Response
SRC6816
170
91
35-30K
58
2-5/16
SRC5716
150
91
35-30K
52
2-1/16
SRC4617
120
91
45-30K
45.5
1-13/16
SRR1316
150
91
40-30K
46
1-13/16
• 60 Watts of Maximum Music Power • 3-½″ MicaInjection Polypropylene Woofer Cone • 1″ PEI
Balanced Drive Tweeter • Powerful Strontium Magnet
for Dynamic Bass Response • Designed for Direct
OEM Replacement
SRR1016
120
90
45-30K
43
1-11/16
SRC916
60
89
60-30K
32.5
1-5/16
http://www.clarion.com
47

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project