Instruction Manual

Instruction Manual
COSY
Time Sleeper
# 036300-356
IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Safety Precautions
Read all instructions before assembly and use of the sleeper. Keep instructions
for future use.
NEVER LEAVE THE CHILD UNATTENDED IN THE COSY TIME
SLEEPER.
IT IS DANGEROUS TO PLACE THE PRODUCT ON A RAISED
SURFACE SUCH AS A TABLE.
DO NOT USE THE PRODUCT IF ANY PART IS BROKEN, TORN, OR
MISSING.
ONLY AN ADULT SHOULD ASSEMBLE, FOLD AND UNFOLD THE
SLEEPER.
BEFORE ASSEMBLY, CHECK THAT THE PRODUCT AND ALL
OF IT’S COMPONENTS HAVE NOT BEEN DAMAGED DURING
TRANSPORTATION. SHOULD ANY PART BE DAMAGED, DO NOT
USE AND KEEP OUT OF REACH OF CHILDREN.
ENSURE USERS OF THIS PRODUCT ARE KNOWLEDGEABLE ON
IT’S CORRECT OPERATION.
DO NOT POSITION THE COT NEAR WALLS AND OBSTACLES TO
PREVENT ENTRAPMENT.
DO NOT ADJUST THE PRODUCT WITH THE CHILD INSIDE.
DO NOT MOVE THE PRODUCT WITH THE CHILD INSIDE.
DO NOT USE THE PRODUCT WITH MORE THAN ONE CHILD AT A
TIME .
2
Safety Precautions
This product is intended for use for babies aged between 0 and 5
months, weighting up to a maximum of 9kg.
When a child is able to sit, kneel or to pull itself up, the product
should not be used anymore for this child.
Before use in ‘co-sleep’ mode (fixed to the bed), make sure the
product is securely anchored and positioned.
When the product is used in ‘co-sleep’ mode (fixed to the bed),
make sure the connection belts and hooked and tensioned
properly, before laying child in the sleeper.The product must
be secured to the parent’s mattress and no gaps between the
product and the adult’s mattress must be present.
Do not use the sleeper without the support frame. Keep the
fastening belts out of reach of children.
3
Safety Precautions
Read all instructions before assembly and use of the sleeper. Keep instructions for
future use.
The thickness of the mattress must be such that vertical height
(upper surface on the mattress until the upper edge of the
product’s sides) is at least 200mm. Do not use more than one
mattress in the crib.
If you purchase a mattress separately, ensure that it is suitable for
the product.
The reference mark on the product’s interior indicates the
maximum thickness of the mattress that shall be used.
Do not leave any object inside the product that could reduce it’s
depth.
Be aware of the risk of open fires and other sources of strong heat,
such as electric bar fires, gas fires etc.
The product is ready for use only when all locking mechanisms
are engaged. Check carefully that these are engaged before use.
WARNING: Failure to follow these warnings and
instructions could result in serious injury or death.
SUFFOCATION HAZARD: Discard all packing
materials immediately after opening. Plastic bags
and ties may cause suffocation or choking.
FALL HAZARD: To help prevent falls, do not use
this product when infant begins to push up on
hands and knees or has reached manufacturer’s
recommended maximum weight of 9kgs,
whichever comes first.
4
Safety Precautions
SUFFOCATION HAZARD
- INFANTS HAVE
SUFFOCATED
In gaps between extra padding and
side of bassinet/cradle, and
on soft bedding.
Use only the pad provided by
manufacturer.
Never add a pillow, comforter or
another mattress for padding.
If a sheet is used with the pad, use only the one provided by CNP
Brands.
To reduce the risk of SIDS, paediatricians recommend healthy
infants be placed on their backs to sleep, unless otherwise
advised by your physician.
A bedside sleeper is designed to provide a sleeping area for an
infant until he or she begins to push up on hands and knees
or approximately 5 months of age. Move your child to another
sleeping product when your child reaches this stage.
5
Safety Precautions
ENTRAPMENT HAZARD - To prevent death from entrapment,
bedside sleeper must be properly secured to adult bed using the
attachment system:
• There must be no more than 1/2 inch (13mm)
gap between bedside sleeper and adult bed.
• Check tightness before each use by pulling
bedside sleeper in a direction away from adult bed.
• If gap exceeds 1/2 inch (13mm) DO NOT use
product. Do not fill the gap with pillows, blankets or
other items that are suffocation hazards.
• Always read and follow assembly instructions for
each product use mode (bedside sleeper, bassinet,
play yard).
• Always use ALL required parts for each use mode.
Check instruction manual for a list of required parts.
Periodically check product for loose, damaged, or
missing parts.
• The anchor plate and straps assembly must
always be used in bedside sleeper mode.
• Never use this product if there are any loose
or missing fasteners, loose joints, broken parts, or
torn mesh/fabric. Check before assembly and
periodically during use. Contact CNP Brands for
replacement parts. Never substitute parts.
• Assemble product according to manufacturer’s
instructions for ANY use mode - bedside sleeper as
well as the bassinet.
6
Safety Precautions
• To avoid death from the infant’s neck being
caught on the top rail on the side that is next to the
adult bed, the top rail must be no higher than the
adult bed mattress.
• Never permit bedding from the adult bed to
extend into the bedtime sleeper.
• NEVER LEAVE your infant in product without the
TOP HORIZONTAL RAIL installed in the upper most
position, unless securely attached to the adult bed.
• NEVER use plastic shipping bags or other plastic
film as mattress covers not sold and intended for
that purpose.They can cause suffocation.
• Make sure all straps are secured and tight when
used in the bedside sleeper position.Tighten straps
periodically.
• STRANGULATION/SUFFOCATION HAZARD: The
top edge of the lowering bar must be level with
or below the top of the adult mattress when used
as the bedside sleeper.The level of the bedside
sleeper bassinet mattress must be a minimum
of 10cm below the top edge of the lowering bar.
NEVER raise the level of the cosy time sleeper
bassinet mattress.
• NEVER USE the cosy time sleeper bassinet in cosleeper position without the anchor plate attached
and locked as shown. Failure to use this anchoring
system could result in serious injury or death to the
infant. Make sure all straps are secured and tight.
Check straps before each use.
7
Safety Precautions
• Failure to use this securing system will allow the
cosy time sleeper to move away from the adult
bed and could result in the infant falling out of the
bedside sleeper bedside bassinet.
• STRANGULATION HAZARD: When anchor plate
and strap assembly are not in use, store in a safe
place not accessible to children.
• DO NOT place product near a window where
cords from blinds or drapes may strangle a child.
• Keep the bassinet away from stoves, heaters,
campfires and other hazards.
• DO NOT allow children to climb or play on or
under unit in any configuration.
• FALL HAZARD: Remove infant from the cosy time
sleeper before starting any conversions.
• Always make sure all top and bottom rails are
securely locked, in all configurations, before putting
an infant child into the unit.
• WARNING: To prevent serious or fatal injury from
falls always keep child within arm’s reach. Never
leave your child unattended.
• Strings can cause strangulation! Do not place
items with a string around a child’s neck, such as
hood strings over a bassinet or cradle or attach
strings to toys.
• The bedside sleeper is designed for use only with
adult beds that are between 18.5 and 24 inches
(47cm to 60cm) from floor to top of adult mattress.
8
Congratulations
Congratulations on your purchase of the Cosy Time
Sleeper.
This product has been designed and developed with safety, comfort
and functionality in mind. Please take the time to read this manual
carefully before using this product and keep it in a safe place for
future reference.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your time sleeper
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and design
may vary from images shown. CNP Brands reserves the right to alter product specifications
without notice as a result of our ongoing policy of product improvement.
9
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If
anything is missing, please contact Customer Service. In Australia, contact CNP Brands on
1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Sleeper frame
x1
Middle support frame
x1
Fixing belts
x1
Mattress with removable cover
x1
Outer travel bag
x1
10
Assembly / Operating Instructions
A: Sleeper frame
B: Middle support frame
C: Fixing belts
D: Mattress with removable cover
D
A
B
C
11
Assembly / Operating Instructions
Assembling the sleeper
1
Unzip the carry bag and remove the sleeper. Lay the sleeper frame face down on a flat surface.
Holding the central supporting structure, turn both of the legs outward.
2
Select the middle support frame and gently push it into the side slots as per image.
3
You will hear the frame click into position once it is in place. Make sure both sides are securely locked into place.
12
Assembly / Operating Instructions
4
Once the frame is secure, turn the unit onto it’s feet. Place the mattress into the sleeper with the curved edges of
the mattress reflecting the curved edges of the sleeper. Your Cosy Sleeper is now assembled.
Height adjustment of the sleeper
The sleeper can be adjusted to different height positions.
1
To adjust the height, push the adjuster button then turn the cap clockwise to lower the sleeper or anti clockwise to
raise the sleeper. Turn the cap to the desired height.
2
Repeat this operation on the opposite side.
13
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed)
Disassembling the sleeper
Follow the steps ‘removing the lining’ on page 18 to
remove the sleeper lining from the structure.
Repeat the steps ‘assembling the sleeper’ in reverse
to collapse the sleeper. Remove the middle support
frame by pressing the fastening pins on both side of the
sleeper.
WARNING - IMPORTANT FOR THE SAFETY OF YOUR CHILD:
This method is only possible with bed types that comply with all of the
conditions described in this paragraph.
In particular, the side support of the crib should always be put close to
the parent’s mattress and the mattress should always be aligned with
the height of the side support for restraint of the crib. Furthermore, the
crib should be firmly fixed to the structure of the parent’s bed or to the
mattress support.
WARNING:
Check to make sure that the crib in the co-sleeping mode does not
interfere with the parent’s bed.
WARNING:
During use, make sure that the parent’s bed sheets, blankets etc, do not
enter and cover the interior of the sleeper.
14
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed)
1
Unzip the sides of the sleeper until they are completely unzipped.
Push in the pop pin located on the top of the bar.
2
Slide the bar away from the pop pin. The bar on both ends will slide out freely. Roll up the unzipped side and secure
with velcro.
3
Clip the female fixing belts into the male buckets located on the underside of the sleeper as per image. Make sure
both buckles on either sides are clicked into place.
15
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed cont)
4
Move the sleeper close to the parent’s bed and check the height of the sleeper compared with the mattress on
the bed. The side support of the sleeper should always be placed close to the parent’s mattress and the mattress
should always be aligned with the height of the side support for restraint of the sleeper.
WARNING:
In the co-sleeping mode the two legs of the sleeper should always be
adjusted to the same height.
5
In order to fix the crib to the parent’s bed in co-sleeping mode, use the attached pair of fixing belts provided. The
fixing belts can be found in the lower pocket of the fabric lining.
6
Slide the straps between the top mattress and the base using a back and forth ‘sawing’ motion and at the same
time pulling downward until the straps and anchor plates are in the desired position.
WARNING:
Ensure the fixing belts are straight.
7
Tighten the loop by pulling the belts firmly. Adjust the belts separately until the sleeper is firmly in contact with the
parent’s mattress.
8
Store any excess of belts inside the pocket positioned on the bottom of the fabric lining.
16
Assembly / Operating Instructions
WARNING:
Before every use always check to make sure there is no space between
the parent’s mattress and the side of the sleeper. If there is, pull the belts
firmly to tighten until there’s no space and the permitted condition of
use has been restored.
WARNING:
Use of product is only permitted with beds and/or mattresses with
straight sides, use of the product with round mattress and or mattress or
water bed is not permitted.
WARNING:
When the product is used in the
co-sleeping mode, it should always be fitted to the long side of access
to the bed, do not fix the product to the bed or bottom of the bed.
17
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed cont)
Never use the Cosy Time Sleeper in co-sleeping position without the
anchor plate. Ensure the plate is securely attached to the adult bed.
__
18
Assembly / Operating Instructions
Freestanding mode
1
Release the rolled up velcro fastening and zip up both sides of sleeper.
2
Line up the bar of the support frame as shown in the image. Gently push the bar until it ‘clicks’ into position.
Repeat for the other side.
19
Assembly / Operating Instructions
Removing the lining
1
Remove the mattress and release the velcro tabs from the middle support frame.
2
Release the velcro straps from the sides of the sleeper as per image.
Locate the zip underneath the fabric lip of the structure and unzip.
3
Gently remove the lining from the upper tubular structure, making sure not to damage the internal part of the lining.
20
How to care for your Cosy Time Sleeper
Maintenance
The sleeper and the mattress have a resistant fabric cover which is completely
removable and washable.
The removal of the fabric should be carried out by an adults only. On a regular basis
check the condition of the product and presence of any possible damage. In the case
of damage do not use and keep it out of the reach of children.
If you have any difficulties in assembling the bassinet, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Cleaning
Do not use solvents, abrasives or aggressive products.
After each wash check the resistance of the fabric and the stitching.
For washing of the fabric, carefully comply with instructions indicated on the label.
Hand wash in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
21
Distributed in Australia by CNP
Brands
20 Calarco Drive,
Derrimut, VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [email protected]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by
Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement